Пример #1
0
int CCollision::IntersectLineTeleWeapon(vec2 Pos0, vec2 Pos1, vec2 *pOutCollision, vec2 *pOutBeforeCollision, int *pTeleNr, bool AllowThrough)
{
	float Distance = distance(Pos0, Pos1);
	int End(Distance+1);
	vec2 Last = Pos0;
	int ix = 0, iy = 0; // Temporary position for checking collision
	int dx = 0, dy = 0; // Offset for checking the "through" tile
	if (AllowThrough)
		{
			ThroughOffset(Pos0, Pos1, &dx, &dy);
		}
	for(int i = 0; i <= End; i++)
	{
		float a = i/(float)End;
		vec2 Pos = mix(Pos0, Pos1, a);
		ix = round_to_int(Pos.x);
		iy = round_to_int(Pos.y);

		int Nx = clamp(ix/32, 0, m_Width-1);
		int Ny = clamp(iy/32, 0, m_Height-1);
		if (g_Config.m_SvOldTeleportWeapons)
			*pTeleNr = IsTeleport(Ny*m_Width+Nx);
		else
			*pTeleNr = IsTeleportWeapon(Ny*m_Width+Nx);
		if(*pTeleNr)
		{
			if(pOutCollision)
				*pOutCollision = Pos;
			if(pOutBeforeCollision)
				*pOutBeforeCollision = Last;
			return COLFLAG_TELE;
		}

		if((CheckPoint(ix, iy) && !(AllowThrough && IsThrough(ix + dx, iy + dy))))
		{
			if(pOutCollision)
				*pOutCollision = Pos;
			if(pOutBeforeCollision)
				*pOutBeforeCollision = Last;
			return GetCollisionAt(ix, iy);
		}

		Last = Pos;
	}
	if(pOutCollision)
		*pOutCollision = Pos1;
	if(pOutBeforeCollision)
		*pOutBeforeCollision = Pos1;
	return 0;
}
Пример #2
0
// TODO: OPT: rewrite this smarter!
void CCollision::MovePoint(vec2 *pInoutPos, vec2 *pInoutVel, float Elasticity, int *pBounces)
{
	if(pBounces)
		*pBounces = 0;

	vec2 Pos = *pInoutPos;
	vec2 Vel = *pInoutVel;
	if(CheckPoint(Pos + Vel))
	{
		int Affected = 0;
		if(CheckPoint(Pos.x + Vel.x, Pos.y))
		{
			pInoutVel->x *= -Elasticity;
			if(pBounces)
				(*pBounces)++;
			Affected++;
		}

		if(CheckPoint(Pos.x, Pos.y + Vel.y))
		{
			pInoutVel->y *= -Elasticity;
			if(pBounces)
				(*pBounces)++;
			Affected++;
		}

		if(Affected == 0)
		{
			pInoutVel->x *= -Elasticity;
			pInoutVel->y *= -Elasticity;
		}
	}
	else
	{
		*pInoutPos = Pos + Vel;
	}
}
Пример #3
0
void Engine::GenerarGallinas(int **table)
{
    chickens_.clear();

    for (int i = 0; i < 7; ++i)
        for(int j = 0; j < 7; j++)
        {
            if(table[i][j] == 2)
            {
                Gallina gallina = CheckPoint(QPoint(j,i),table);

                if(gallina.pos_inicial != QPoint(-1,-1))
                    chickens_.push_back(gallina);
            }
        }
}
Пример #4
0
int CTransCtrl::DoHitTest( int nShowButton )
{
	int test = TestDesktop( );
	if( test != 0 )  return test;

	POINT mouse;	

	GetCursorPos( &mouse );
	if( SendMessage( m_hDeskListViewWnd, WM_NCHITTEST, 0,
		MAKELPARAM( mouse.x, mouse.y) ) != HTNOWHERE )
	{		
		
		if( CheckPoint( mouse ) )
		{	
			if( !IsWindowVisible( m_hDeskListViewWnd ) )
			{
				if( nShowButton )
				{
					ShowButton( true ); 
				}
				else ShowWindow( m_hDeskListViewWnd, SW_SHOWNA );
			}				
		}
		else
		{
			if( nShowButton )
			{
				ShowButton( false );
			}
			if( IsWindowVisible( m_hDeskListViewWnd ) )
				ShowWindow( m_hDeskListViewWnd, SW_HIDE );
		}
	}	 
	else{
		if( nShowButton )
		{
			ShowButton( false );
		}
		if( IsWindowVisible( m_hDeskListViewWnd ) )
		{
				ShowWindow( m_hDeskListViewWnd, SW_HIDE );
		}
	}

	return 0;
}
Пример #5
0
int CCollision::IntersectLineTeleWeapon(vec2 Pos0, vec2 Pos1, vec2 *pOutCollision, vec2 *pOutBeforeCollision, int *pTeleNr)
{
	float Distance = distance(Pos0, Pos1);
	int End(Distance+1);
	vec2 Last = Pos0;
	int ix = 0, iy = 0; // Temporary position for checking collision
	for(int i = 0; i <= End; i++)
	{
		float a = i/(float)End;
		vec2 Pos = mix(Pos0, Pos1, a);
		ix = round_to_int(Pos.x);
		iy = round_to_int(Pos.y);

		int Index = GetPureMapIndex(Pos);
		if (g_Config.m_SvOldTeleportWeapons)
			*pTeleNr = IsTeleport(Index);
		else
			*pTeleNr = IsTeleportWeapon(Index);
		if(*pTeleNr)
		{
			if(pOutCollision)
				*pOutCollision = Pos;
			if(pOutBeforeCollision)
				*pOutBeforeCollision = Last;
			return TILE_TELEINWEAPON;
		}

		if(CheckPoint(ix, iy))
		{
			if(pOutCollision)
				*pOutCollision = Pos;
			if(pOutBeforeCollision)
				*pOutBeforeCollision = Last;
			return GetCollisionAt(ix, iy);
		}

		Last = Pos;
	}
	if(pOutCollision)
		*pOutCollision = Pos1;
	if(pOutBeforeCollision)
		*pOutBeforeCollision = Pos1;
	return 0;
}
void GUIComponentManager::UpdateNode(int index)
{
	GUIComponent *currentCreateGUIComponent = guiComponentFactory.CreateGUIComponent(guiPresentation->GetNewComponent());
	StoreGUIComponent(currentCreateGUIComponent, index);
	//qDebug() << guiComponents.at(index)->GetPosition();

	if(!CheckPoint(guiComponents.at(index)->GetPosition()))
	{
		QPointF point = guiPresentation->GetMousePoint();
		guiComponents.at(index)->setPos(point);
	}
	else
	{
		guiComponents.at(index)->setPos(guiComponents.at(index)->GetPosition());
	}
	
	guiComponents.at(index)->UpdatePoint();
	//qDebug() << guiComponents.at(index)->GetPosition();
	DrawNode(guiComponents.at(index));
	DesroyPreview();
}
void GUIComponentManager::UpdateComponent(int id)
{
	GUIComponent *currentCreateGUIComponent = guiComponentFactory.CreateGUIComponent(guiPresentation->GetComponent(id));
	StoreGUIComponent(currentCreateGUIComponent, id);
	//qDebug() << guiComponents.at(index)->GetPosition();

	if(!CheckPoint(guiComponents.at(id)->GetPosition()))
	{
		QPointF point = guiPresentation->GetMousePoint();
		guiComponents.at(id)->setPos(point);
	}
	else
	{
		guiComponents.at(id)->setPos(guiComponents.at(id)->GetPosition());
	}

	guiComponents.at(id)->UpdatePoint();
	//qDebug() << guiComponents.at(index)->GetPosition();
	DrawNode(guiComponents.at(id));
	ClearSelected();
}
Пример #8
0
void ProjectJournal::redo()
{
	while( !m_redoCheckPoints.isEmpty() )
	{
		CheckPoint c = m_redoCheckPoints.pop();
		JournallingObject *jo = m_joIDs[c.joID];

		if( jo )
		{
			DataFile curState( DataFile::JournalData );
			jo->saveState( curState, curState.content() );
			m_undoCheckPoints.push( CheckPoint( c.joID, curState ) );

			bool prev = isJournalling();
			setJournalling( false );
			jo->restoreState( c.data.content().firstChildElement() );
			setJournalling( prev );
			engine::getSong()->setModified();
			break;
		}
	}
}
Пример #9
0
///
//	CheckLine()
//
//		Compute intersection of P1 --> P2 line segment with face planes 
//		Then test intersection point to see if it is on cube face       
//		Consider only face planes in "outcode_diff"                     
//		Note: Zero bits in "outcode_diff" means face line is outside of */
//
static
int CheckLine(const vector3& p1, const vector3& p2, int outcode_diff)
{

   if ((0x01 & outcode_diff) != 0)
      if (CheckPoint(p1,p2,( .5f-p1.x())/(p2.x()-p1.x()),0x3e) == INSIDE) return(INSIDE);
   if ((0x02 & outcode_diff) != 0)
      if (CheckPoint(p1,p2,(-.5f-p1.x())/(p2.x()-p1.x()),0x3d) == INSIDE) return(INSIDE);
   if ((0x04 & outcode_diff) != 0) 
      if (CheckPoint(p1,p2,( .5f-p1.y())/(p2.y()-p1.y()),0x3b) == INSIDE) return(INSIDE);
   if ((0x08 & outcode_diff) != 0) 
      if (CheckPoint(p1,p2,(-.5f-p1.y())/(p2.y()-p1.y()),0x37) == INSIDE) return(INSIDE);
   if ((0x10 & outcode_diff) != 0) 
      if (CheckPoint(p1,p2,( .5f-p1.z())/(p2.z()-p1.z()),0x2f) == INSIDE) return(INSIDE);
   if ((0x20 & outcode_diff) != 0) 
      if (CheckPoint(p1,p2,(-.5f-p1.z())/(p2.z()-p1.z()),0x1f) == INSIDE) return(INSIDE);
   return(OUTSIDE);
}
Пример #10
0
int main(int argc, char **argv)
{
  DM             dm;
  PetscSection   s;
  Vec            u;
  AppCtx         user;
  PetscInt       cells[3] = {2, 2, 2};
  PetscInt       size = 0, cStart, cEnd, cell, c, f, i, j;
  PetscErrorCode ierr;

  ierr = PetscInitialize(&argc, &argv, NULL,help);if (ierr) return ierr;
  ierr = ProcessOptions(PETSC_COMM_WORLD, &user);CHKERRQ(ierr);
  ierr = DMPlexCreateHexBoxMesh(PETSC_COMM_WORLD, user.dim, cells, DM_BOUNDARY_NONE, DM_BOUNDARY_NONE, DM_BOUNDARY_NONE, &dm);CHKERRQ(ierr);
  ierr = DMSetFromOptions(dm);CHKERRQ(ierr);
  /* Create a section for SEM order k */
  {
    PetscInt *numDof, d;

    ierr = PetscMalloc1(user.Nf*(user.dim+1), &numDof);CHKERRQ(ierr);
    for (f = 0; f < user.Nf; ++f) {
      for (d = 0; d <= user.dim; ++d) numDof[f*(user.dim+1)+d] = PetscPowInt(user.k[f]-1, d)*user.Nc[f];
      size += PetscPowInt(user.k[f]+1, d)*user.Nc[f];
    }
    ierr = DMPlexCreateSection(dm, user.dim, user.Nf, user.Nc, numDof, 0, NULL, NULL, NULL, NULL, &s);CHKERRQ(ierr);
    ierr = SetSymmetries(dm, s, &user);CHKERRQ(ierr);
    ierr = PetscFree(numDof);CHKERRQ(ierr);
  }
  ierr = DMSetDefaultSection(dm, s);CHKERRQ(ierr);
  /* Create spectral ordering and load in data */
  ierr = DMPlexCreateSpectralClosurePermutation(dm, NULL);CHKERRQ(ierr);
  ierr = DMGetLocalVector(dm, &u);CHKERRQ(ierr);
  switch (user.dim) {
  case 2: ierr = LoadData2D(dm, 2, 2, size, u, &user);CHKERRQ(ierr);break;
  case 3: ierr = LoadData3D(dm, 2, 2, 2, size, u, &user);CHKERRQ(ierr);break;
  }
  /* Remove ordering and check some values */
  ierr = PetscSectionSetClosurePermutation(s, (PetscObject) dm, NULL);CHKERRQ(ierr);
  switch (user.dim) {
  case 2:
    ierr = CheckPoint(dm, u,  0, &user);CHKERRQ(ierr);
    ierr = CheckPoint(dm, u, 13, &user);CHKERRQ(ierr);
    ierr = CheckPoint(dm, u, 15, &user);CHKERRQ(ierr);
    ierr = CheckPoint(dm, u, 19, &user);CHKERRQ(ierr);
    break;
  case 3:
    ierr = CheckPoint(dm, u,  0, &user);CHKERRQ(ierr);
    ierr = CheckPoint(dm, u, 13, &user);CHKERRQ(ierr);
    ierr = CheckPoint(dm, u, 15, &user);CHKERRQ(ierr);
    ierr = CheckPoint(dm, u, 19, &user);CHKERRQ(ierr);
    break;
  }
  /* Recreate spectral ordering and read out data */
  ierr = DMPlexCreateSpectralClosurePermutation(dm, s);CHKERRQ(ierr);
  switch (user.dim) {
  case 2: ierr = ReadData2D(dm, u, &user);CHKERRQ(ierr);break;
  case 3: ierr = ReadData3D(dm, u, &user);CHKERRQ(ierr);break;
  }
  ierr = DMRestoreLocalVector(dm, &u);CHKERRQ(ierr);
  ierr = PetscSectionDestroy(&s);CHKERRQ(ierr);
  ierr = DMDestroy(&dm);CHKERRQ(ierr);
  ierr = PetscFree(user.Nc);CHKERRQ(ierr);
  ierr = PetscFree(user.k);CHKERRQ(ierr);
  ierr = PetscFinalize();
  return ierr;
}
Пример #11
0
int Co_CheckCollision(Map *map, Mobile mob, Collision *collision) {
    double v = G_Length(mob.vel);

    if (ISZERO(v)) return 0;

    int collisions = 0;
    Collision c = {
        .mob = mob,
        .t0 = DBL_MAX,
    };

    for (int i = 0; i < map->numwalls; i++) {
        Wall *w = &map->walls[i];
        Segment s = w->seg;
        Line l = G_SupportLine(s);
        Vector normal = G_Normal(l);
        double lp = G_LinePointDistance(l, mob.pos);

        // Skip if we are too far away from the line.
        if (lp > v + mob.radius) continue;

        // Skip if we are moving parallel to the line.
        if (G_Parallel(mob.vel, l.dir) && lp > mob.radius) continue;

        // Check for collision against the interior of the wall.
        double d, t = (lp - mob.radius) / fabs(G_Dot(mob.vel, normal));
        if (t >= 0 && t <= 1) {
            // We hit the support line.
            Vector I = G_Sub(
                    G_Sum(mob.pos, G_Scale(t, mob.vel)),
                    G_Scale(G_Side(l, mob.pos) * mob.radius, normal)
                    );

            if (G_IsPointOnSegment(s, I)) {
                // We hit the segment: we have a collision.
                d = G_Distance(mob.pos, I);
                if (t < c.t0) {
                    collisions++;
                    c.point = I;
                    c.t0 = t;
                    c.wall = w;
                    c.distance = d;
                }
                continue;
            }
        }

        // Check for collision against the start vertex.
        if (CheckPoint(s.start, mob, &d, &t)) {
            // We hit the start vertex.
            if (t < c.t0) {
                collisions++;
                c.point = s.start;
                c.t0 = t;
                c.wall = w;
                c.distance = d;
            }
            continue;
        }

        // Check for collision against the end vertex.
        if (CheckPoint(s.end, mob, &d, &t)) {
            // We hit the end vertex.
            if (t < c.t0) {
                collisions++;
                c.point = s.end;
                c.t0 = t;
                c.wall = w;
                c.distance = d;
            }
            continue;
        }
    }

    if (collisions && collision) {
        *collision = c;
    }

    return collisions;
}
Пример #12
0
int CPieceRook::MoveTest(int x, int y)
{
	if(!CheckPoint(x, y))
	{
		return PM_UNREACHABLE;
	}
	
	if(m_x != x && m_y != y)
	{
		return PM_UNREACHABLE;
	}
	
	if(m_x == x && m_y == y)
	{
		return PM_UNREACHABLE;
	}
	
	int i;
	int min, max;
	CPiece * piece;
	
	//Ô¶¾àÀëÕÏ°­Èü...
	if(m_x != x)
	{
		//ºáÏòÒƶ¯
		min = x;
		max = x;
		
		if(x < m_x)
		{
			max = m_x;
		}else{
			min = m_x;
		}
		
		for(i=min+1; i<max; i++)
		{
			piece = m_board->GetPiece(i, y);
			if (piece != NULL)
			{
				return PM_UNREACHABLE;
			}
		}
	}else{	
		//×ÝÏòÒƶ¯
		min = y;
		max = y;
		
		if(y < m_y)
		{
			max = m_y;
		}else{
			min = m_y;
		}
		
		for(i=min+1; i<max; i++)
		{
			piece = m_board->GetPiece(x, i);
			if (piece != NULL)
			{
				return PM_UNREACHABLE;
			}
		}
	}
	
	//ÎÞÕÏ°­..
	piece = m_board->GetPiece(x, y);
	if(piece == NULL)
	{
		return PM_MOVE;
	}
	if(piece->GetCamp() == this->GetCamp())
	{
		return PM_UNREACHABLE;
	}
	return PM_CAPTURE;

}
Пример #13
0
void Test_FixTjunctions( face_t *list )
{
	int		i, j, m;
	int		k;
	int		count, count2;
	face_t		*f, *f2;

	int		trinum, trinum2;
	int		addnum;

	int		nofixnum = 0, splitnum = 0, startnum = 0;

	printf( "fixing tjunctions ...\n" );

	count2 = count = 0;
	trinum2 = trinum = 0;
	for ( f = list; f ; f=f->next )
	{

//		printf( "in num: %d\n", f->p->pointnum );
		InitJPolyFromPolygon( f->p );
		
//		count2 += f->p->pointnum;
		count++;
		trinum += ( jpnum - 2 );

		addnum = 0;
		for ( f2 = list; f2 ; f2=f2->next )
		{			
			if ( f == f2 )
				continue;

			for ( k = 0; k < 3; k++ )
			{
				if ( f->min[k] > f2->max[k] || f->max[k] < f2->min[k] )
					break;
			}
			if ( k != 3 )
				continue;
			

			for ( m = 0; m < f2->p->pointnum; m++ )
			{
				CheckPoint( f2->p->p[m] );
			}
		}
//		printf( "jpoly: %d\n", jpnum );

		trinum2 += ( jpnum-2 );
		if ( jpnum == f->p->pointnum ) count2++;

		ClassifyJPoly();
		f->type = jtype;
		if ( jtype != 1024 )
		{
			f->fix = PolygonFromJPoly();
			f->fix2 = NULL;
		}		
		else
		{
			PolygonsFromJPoly( &f->fix, &f->fix2 );
		}

		if ( jtype == -1 )
			nofixnum++;
		else if ( jtype == 1024 )
			splitnum++;
		else
			startnum++;
	}

	printf( " fixed faces %d of %d\n", count2, count );
	printf( " trinum from %d to %d\n", trinum, trinum2 );
	printf( " %d nofixnum, %d splitnum, %d startnum\n", nofixnum, splitnum, startnum );
}
Пример #14
0
void CHandDrawEffect::DrawEdge(IplImage* image, IplImage* image2, IplImage* base, int plane)
{
	CvSeq* contourSeq0 = NULL;

	int height    = image->height;
	int width     = image->width;
	int step      = image->widthStep;
	int channels  = image->nChannels;
	uchar* data   = (uchar*)image->imageData;

	if(plane < 3) {
		cvCvtColor(image, hsv, CV_BGR2HSV);				// HSVのplaneを線画生成の元にする
		for(int i = 0; i < height * width; i++)
			grayImage->imageData[i] = hsv->imageData[i * 3 + plane];
	} else {
		cvCvtColor(image, grayImage, CV_BGR2GRAY);		// グレーイメージを作り線画生成の元にする
	}

	IplImage* target = base;					// 書き込むターゲットイメージ

	for(int x = 20; x < 240; x += Y) {
		cvThreshold(grayImage, binaryImage, x, 255, CV_THRESH_BINARY);	// x の値を境に2値化し輪郭を抽出
		contourSeq0 = 0;
		cvFindContours(binaryImage, memStorage0, &contourSeq0, sizeof(CvContour), CV_RETR_LIST, CV_CHAIN_APPROX_NONE, cvPoint(0, 0)); // 輪郭線探索

		if(lineNoise > 0) { // 不連続ラインの場合
			for(; contourSeq0 != 0; contourSeq0 = contourSeq0->h_next) {
				CvPoint *p;
				if(contourSeq0->total< X * 5) continue;		// 5角形以下の細かいのは排除

				int index = 0;
				for(int i = 0; i < contourSeq0->total; i += X) {
					p = CV_GET_SEQ_ELEM(CvPoint, contourSeq0, i);				// 点の場所と色を登録
					CvScalar color = GetColor(image2, p->x, p->y);
					MulScaler(color, DARK);										// 輝度を修正
					color.val[3] = CheckPoint(image, p->x, p->y, lineNoise);	// 有効点かどうかを近接ピクセルから判断して[3]へ格納
					SetPoint(index, p, color);									// pointTableへ保存
					index++;
					if(index > MAX_POINT) {
					//	printf("INDEX ERROR\n"); 
						index = 0;
					}
				}
				// 5連続以下の有効点は無効 (Pending:高速化)
				for(int i = 0; i < index; i++) {
					int p1 = i;
					int p2, p3, p4, p0;
					if(pointTable[p1].color.val[3]) {
						p2 = (p1 + 1) % index;
						p3 = (p1 + 2) % index;
						p4 = (p1 + 3) % index;
						p0 = (p1 - 1 + index) % index;
						if(pointTable[p0].color.val[3]) continue;
						if(!pointTable[p2].color.val[3] ||
							!pointTable[p3].color.val[3] ||
							!pointTable[p4].color.val[3]) {						
							pointTable[p1].color.val[3] = 0;
						}
					}
				}
				// 接続された有効点を描く
				for(int i = 0; i < index; i++) {
					int p1 = i;
					int p2 = (i + 1) % index;	// if (p2==index) p2 = 0;
					if(pointTable[p1].color.val[3] && pointTable[p2].color.val[3]) {
						CvScalar c = pointTable[p1].color;
						MulScaler(c, DARK);
						cvLine(target, pointTable[p1].p, pointTable[p2].p, c, lineWidth, CV_AA);
					}
				}
			}
		} else {
			// 全部描く場合
			for(; contourSeq0 != 0; contourSeq0 = contourSeq0->h_next) {

				CvPoint *p1 = 0;
				CvPoint *p2;

				if(contourSeq0->total < X * 5) continue;		

				for(int i = 0; i < contourSeq0->total; i += X) {
					p1 = CV_GET_SEQ_ELEM(CvPoint, contourSeq0, (i) % contourSeq0->total);//始点
					p2 = CV_GET_SEQ_ELEM(CvPoint, contourSeq0, (i + X + Z) % contourSeq0->total);// 終点
					CvScalar color = GetColor(image, p1->x, p1->y);
					MulScaler(color, DARK);
					cvLine(target, *p1, *p2, color, lineWidth, CV_AA);
				}
			}
		}
	}
	cvClearMemStorage(memStorage0);
}
Пример #15
0
bool Frustum::CheckPoint(XMFLOAT3 point)
{
    return CheckPoint(point.x, point.y, point.z);
}
Пример #16
0
	void ObjectMemory::DumpStats()
	{
		tracelock lock(TRACESTREAM);

		TRACESTREAM << std::endl<< L"Object Memory Statistics:" << std::endl
			<< L"------------------------------" << std::endl;

		CheckPoint();
		_CrtMemDumpStatistics(&CRTMemState);

#ifdef _DEBUG
		checkPools();
#endif

		TRACESTREAM << std::endl<< L"Pool Statistics:" << std::endl
			 << L"------------------" << std::endl << std::dec
			  << NumPools<< L" pools in the interval ("
			  << m_pools[0].getSize()<< L" to: "
			  << m_pools[NumPools-1].getSize()<< L" by: "
			  << PoolGranularity << L')' << std::endl << std::endl;

		int pageWaste=0;
		int totalPages=0;
		int totalFreeBytes=0;
		int totalChunks=0;
		int totalFreeChunks=0;
		for (int i=0;i<NumPools;i++)
		{
			int nSize = m_pools[i].getSize();
			int perPage = dwPageSize/nSize;
			int wastePerPage = dwPageSize - (perPage*nSize);
			int nPages = m_pools[i].getPages();
			int nChunks = perPage*nPages;
			int waste = nPages*wastePerPage;
			int nFree = m_pools[i].getFree();
			TRACE(L"%d: size %d, %d objects on %d pgs (%d per pg, %d free), waste %d (%d per page)\n",
				i, nSize, nChunks-nFree, nPages, perPage, nFree, waste, wastePerPage);
			totalChunks += nChunks;
			pageWaste += waste;
			totalPages += nPages;
			totalFreeBytes += nFree*nSize;
			totalFreeChunks += nFree;
		}

		int objectWaste = 0;
		int totalObjects = 0;
		const OTE* pEnd = m_pOT+m_nOTSize;
		for (OTE* ote=m_pOT; ote < pEnd; ote++)
		{
			if (!ote->isFree())
			{
				totalObjects++;
				if (ote->heapSpace() == OTEFlags::PoolSpace)
				{
					int size = ote->sizeOf();
					int chunkSize = _ROUND2(size, PoolGranularity);
					objectWaste += chunkSize - size;
				}
			}
		}

		int wastePercentage = (totalChunks - totalFreeChunks) == 0 
								? 0 
								: int(double(objectWaste)/
										double(totalChunks-totalFreeChunks)*100.0);

		TRACESTREAM<< L"===============================================" << std::endl;
		TRACE(L"Total objects	= %d\n"
			  "Total pool objs	= %d\n"
			  "Total chunks		= %d\n"
			  "Total Pages		= %d\n"
			  "Total Allocs		= %d\n"
			  "Total allocated	= %d\n"
			  "Page Waste		= %d bytes\n"
			  "Object Waste		= %d bytes (avg 0.%d)\n"
			  "Total Waste		= %d\n"
			  "Total free chks	= %d\n"
			  "Total Free		= %d bytes\n",
				totalObjects,
				totalChunks-totalFreeChunks,
				totalChunks,
				totalPages, 
				FixedSizePool::m_nAllocations,
				totalPages*dwPageSize, 
				pageWaste, 
				objectWaste, wastePercentage,
				pageWaste+objectWaste,
				totalFreeChunks,
				totalFreeBytes);
	}