/***************************************************************
* Function to update the SW Version string
**************************************************************/
void DisUpdateFirmWareRevision(void)
{
CYBLE_STACK_LIB_VERSION_T stackVersion;
uint8 fwRev[9u] = "0.0.0.000";
if(CyBle_GetStackLibraryVersion(&stackVersion) == CYBLE_ERROR_OK)
{
/* Transform numbers to ASCII string */
fwRev[0u] = stackVersion.majorVersion + '0';
fwRev[2u] = stackVersion.minorVersion + '0';
fwRev[4u] = stackVersion.patch + '0';
fwRev[6u] = (stackVersion.buildNumber / 100u) + '0';
stackVersion.buildNumber %= 100u;
fwRev[7u] = (stackVersion.buildNumber / 10u) + '0';
fwRev[8u] = (stackVersion.buildNumber % 10u) + '0';
}
CyBle_DissSetCharacteristicValue(CYBLE_DIS_FIRMWARE_REV, sizeof(fwRev), fwRev);
}
int main()
{
hkj_timer t;
const uint16 myCharHandle = 0x0E;
uint8 writeData = 0;
CYBLE_GATT_VALUE_T writeValue = \
{ &writeData, sizeof(writeData), sizeof(writeData) };
CYBLE_GATTC_WRITE_REQ_T writeReqParam = \
{ .value = writeValue, .attrHandle = myCharHandle };
CYBLE_STACK_LIB_VERSION_T stackVersion;
CyGlobalIntEnable;
UART_Start();
hkj_debug_init();
CyBle_GetStackLibraryVersion(&stackVersion);
debug_print("Latency Central Stack: %u.%u.%u.%u\r\n", \
stackVersion.majorVersion, stackVersion.minorVersion, \
stackVersion.patch, stackVersion.buildNumber);
CyBle_Start(BleEventHandler);
hkj_timer_ms_init(&t);
while(1)
{
CyBle_ProcessEvents();
if (connHandle.bdHandle != 0)
{
if (hkj_timer_ms_get_delta(&t) > 500)
{
WRITE_CMD_PIN_Write(1);
CyBle_GattcWriteWithoutResponse(connHandle, &writeReqParam);
hkj_timer_ms_reset_delta(&t);
CyDelay(2);
WRITE_CMD_PIN_Write(0);
}
}
hkj_ble_events_log_debug_print();
}
}
int main()
{
CYBLE_LP_MODE_T lpMode;
CYBLE_BLESS_STATE_T blessState;
CYBLE_STACK_LIB_VERSION_T stackVersion;
CyGlobalIntEnable;
UART_DEB_Start(); /* Start communication component */
printf("BLE Heart Rate Collector Example Project \r\n");
Disconnect_LED_Write(LED_OFF);
Scanning_LED_Write(LED_OFF);
Notification_LED_Write(LED_OFF);
apiResult = CyBle_Start(AppCallBack);
if(apiResult != CYBLE_ERROR_OK)
{
printf("CyBle_Start API Error: 0x%x \r\n", apiResult);
}
apiResult = CyBle_GetStackLibraryVersion(&stackVersion);
if(apiResult != CYBLE_ERROR_OK)
{
printf("CyBle_GetStackLibraryVersion API Error: 0x%x \r\n", apiResult);
}
else
{
printf("Stack Version: %d.%d.%d.%d \r\n", stackVersion.majorVersion,
stackVersion.minorVersion, stackVersion.patch, stackVersion.buildNumber);
}
CyBle_BasRegisterAttrCallback(BasCallBack);
HrsInit();
while(1)
{
if(CyBle_GetState() != CYBLE_STATE_INITIALIZING)
{
/* Enter DeepSleep mode between connection intervals */
lpMode = CyBle_EnterLPM(CYBLE_BLESS_DEEPSLEEP);
CyGlobalIntDisable;
blessState = CyBle_GetBleSsState();
if(lpMode == CYBLE_BLESS_DEEPSLEEP)
{
if(blessState == CYBLE_BLESS_STATE_ECO_ON || blessState == CYBLE_BLESS_STATE_DEEPSLEEP)
{
/* Put the device into the DeepSleep mode only when all debug information has been sent */
if((UART_DEB_SpiUartGetTxBufferSize() + UART_DEB_GET_TX_FIFO_SR_VALID) == 0u)
{
CySysPmDeepSleep();
}
else
{
CySysPmSleep();
}
}
}
else
{
if(blessState != CYBLE_BLESS_STATE_EVENT_CLOSE)
{
CySysPmSleep();
}
}
CyGlobalIntEnable;
/* Handle advertising led blinking */
HandleLeds();
}
/* Store bonding data to flash only when all debug information has been sent */
if((cyBle_pendingFlashWrite != 0u) &&
((UART_DEB_SpiUartGetTxBufferSize() + UART_DEB_GET_TX_FIFO_SR_VALID) == 0u))
{
apiResult = CyBle_StoreBondingData(0u);
printf("Store bonding data, status: %x \r\n", apiResult);
}
/*******************************************************************
* Processes all pending BLE events in the stack
*******************************************************************/
CyBle_ProcessEvents();
}
}
int main()
{
CYBLE_STACK_LIB_VERSION_T stackVersion;
CyGlobalIntEnable;
UART_DEB_Start(); /* Start communication component */
printf("BLE Heart Rate Sensor Example Project \r\n");
Disconnect_LED_Write(LED_OFF);
Advertising_LED_Write(LED_OFF);
/* Start CYBLE component and register generic event handler */
apiResult = CyBle_Start(AppCallBack);
if(apiResult != CYBLE_ERROR_OK)
{
printf("CyBle_Start API Error: %x \r\n", apiResult);
}
apiResult = CyBle_GetStackLibraryVersion(&stackVersion);
if(apiResult != CYBLE_ERROR_OK)
{
printf("CyBle_GetStackLibraryVersion API Error: 0x%x \r\n", apiResult);
}
else
{
printf("Stack Version: %d.%d.%d.%d \r\n", stackVersion.majorVersion,
stackVersion.minorVersion, stackVersion.patch, stackVersion.buildNumber);
}
/* Services initialization */
HrsInit();
WDT_Start();
/***************************************************************************
* Main polling loop
***************************************************************************/
while(1)
{
/***********************************************************************
* Wait for connection established with Central device
***********************************************************************/
if(CyBle_GetState() == CYBLE_STATE_CONNECTED)
{
/*******************************************************************
* Periodically simulate heart rate and measure a battery level
* and send results to the Client
*******************************************************************/
if(mainTimer != 0u)
{
mainTimer = 0u;
if(heartRateSimulation == ENABLED)
{
SimulateHeartRate();
}
}
}
/*******************************************************************
* Process all pending BLE events in the stack
*******************************************************************/
CyBle_ProcessEvents();
}
}
