/* RESOUT */
DB8500_PIN_HOG("GPIO84_C2", gpio_in_nopull), /* RESOUT0 */
DB8500_PIN_HOG("GPIO85_D5", gpio_in_nopull), /* RESOUT2 */
/* SD card detect */
DB8500_PIN_HOG("GPIO230_AF7", gpio_in_pu),
/*
* The following pin sets were known as "runtime pins" before being
* converted to the pinctrl model. Here we model them as "default"
* states.
*/
/* Mux in I2C blocks */
DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
/* i2c0 sleep state */
DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"),
DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"),
/* Mux in I2C1 blocks, put pins into GPIO in sleepmode no pull-up */
DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
/* i2c1 sleep state */
DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"),
DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"),
/* Mux in I2C2 blocks, put pins into GPIO in sleepmode no pull-up */
DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
/* i2c2 sleep state */
DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"),
DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"),
/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
*/
DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */
DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */
DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */
DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */
/*
* Mux in UART2 on altfunction C and set pull-ups.
* TODO: is this used on U8500 variants and Snowball really?
* The setting on GPIO31 conflicts with magnetometer use on hrefv60
*/
/* default state for UART2 */
DB8500_MUX("u2rxtx_c_1", "u2", "uart2"),
DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */
DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */
/* Sleep state for UART2 */
DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"),
DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"),
/*
* The following pin sets were known as "runtime pins" before being
* converted to the pinctrl model. Here we model them as "default"
* states.
*/
/* Mux in UART0 after initialization */
DB8500_MUX("u0_a_1", "u0", "uart0"),
DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */
DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */
DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
/* Sleep state for UART0 */
DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"),
DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"),
