JSObject *
WrapperFactory::Rewrap(JSContext *cx, HandleObject existing, HandleObject obj,
HandleObject wrappedProto, HandleObject parent,
unsigned flags)
{
MOZ_ASSERT(!IsWrapper(obj) ||
GetProxyHandler(obj) == &XrayWaiver ||
js::GetObjectClass(obj)->ext.innerObject,
"wrapped object passed to rewrap");
MOZ_ASSERT(!XrayUtils::IsXPCWNHolderClass(JS_GetClass(obj)), "trying to wrap a holder");
MOZ_ASSERT(!js::IsInnerObject(obj));
// We sometimes end up here after nsContentUtils has been shut down but before
// XPConnect has been shut down, so check the context stack the roundabout way.
MOZ_ASSERT(XPCJSRuntime::Get()->GetJSContextStack()->Peek() == cx);
// Compute the information we need to select the right wrapper.
JSCompartment *origin = js::GetObjectCompartment(obj);
JSCompartment *target = js::GetContextCompartment(cx);
bool originIsChrome = AccessCheck::isChrome(origin);
bool targetIsChrome = AccessCheck::isChrome(target);
bool originSubsumesTarget = AccessCheck::subsumesConsideringDomain(origin, target);
bool targetSubsumesOrigin = AccessCheck::subsumesConsideringDomain(target, origin);
bool sameOrigin = targetSubsumesOrigin && originSubsumesTarget;
XrayType xrayType = GetXrayType(obj);
bool waiveXrayFlag = flags & WAIVE_XRAY_WRAPPER_FLAG;
Wrapper *wrapper;
CompartmentPrivate *targetdata = EnsureCompartmentPrivate(target);
//
// First, handle the special cases.
//
// If UniversalXPConnect is enabled, this is just some dumb mochitest. Use
// a vanilla CCW.
if (xpc::IsUniversalXPConnectEnabled(target)) {
wrapper = &CrossCompartmentWrapper::singleton;
// If this is a chrome object being exposed to content without Xrays, use
// a COW.
} else if (originIsChrome && !targetIsChrome && xrayType == NotXray) {
wrapper = &ChromeObjectWrapper::singleton;
// If content is accessing NAC, we need a special filter, even if the
// object is same origin. Note that we allow access to NAC for remote-XUL
// whitelisted domains, since they don't have XBL scopes.
} else if (AccessCheck::needsSystemOnlyWrapper(obj) &&
xpc::AllowXBLScope(target) &&
!(targetIsChrome || (targetSubsumesOrigin && nsContentUtils::IsCallerXBL())))
{
wrapper = &FilteringWrapper<CrossCompartmentSecurityWrapper, Opaque>::singleton;
}
// Normally, a non-xrayable non-waived content object that finds itself in
// a privileged scope is wrapped with a CrossCompartmentWrapper, even though
// the lack of a waiver _really_ should give it an opaque wrapper. This is
// a bit too entrenched to change for content-chrome, but we can at least fix
// it for XBL scopes.
//
// See bug 843829.
else if (targetSubsumesOrigin && !originSubsumesTarget &&
!waiveXrayFlag && xrayType == NotXray &&
IsXBLScope(target))
{
wrapper = &FilteringWrapper<CrossCompartmentSecurityWrapper, GentlyOpaque>::singleton;
}
//
// Now, handle the regular cases.
//
// These are wrappers we can compute using a rule-based approach. In order
// to do so, we need to compute some parameters.
//
else {
// The wrapper is a security wrapper (protecting the wrappee) if and
// only if the target does not subsume the origin.
bool securityWrapper = !targetSubsumesOrigin;
// Xrays are warranted if either the target or the origin don't trust
// each other. This is generally the case, unless the two are same-origin
// and the caller has not requested same-origin Xrays.
//
// Xrays are a bidirectional protection, since it affords clarity to the
// caller and privacy to the callee.
bool wantXrays = !(sameOrigin && !targetdata->wantXrays);
// If Xrays are warranted, the caller may waive them for non-security
// wrappers.
bool waiveXrays = wantXrays && !securityWrapper && waiveXrayFlag;
wrapper = SelectWrapper(securityWrapper, wantXrays, xrayType, waiveXrays);
}
if (!targetSubsumesOrigin) {
// Do a belt-and-suspenders check against exposing eval()/Function() to
// non-subsuming content.
JSFunction *fun = JS_GetObjectFunction(obj);
if (fun) {
if (JS_IsBuiltinEvalFunction(fun) || JS_IsBuiltinFunctionConstructor(fun)) {
JS_ReportError(cx, "Permission denied to expose eval or Function to non-subsuming content");
return nullptr;
}
}
}
DEBUG_CheckUnwrapSafety(obj, wrapper, origin, target);
if (existing)
return Wrapper::Renew(cx, existing, obj, wrapper);
return Wrapper::New(cx, obj, parent, wrapper);
}
JSObject *
WrapperFactory::Rewrap(JSContext *cx, HandleObject existing, HandleObject obj,
HandleObject parent)
{
MOZ_ASSERT(!IsWrapper(obj) ||
GetProxyHandler(obj) == &XrayWaiver ||
js::GetObjectClass(obj)->ext.innerObject,
"wrapped object passed to rewrap");
MOZ_ASSERT(!XrayUtils::IsXPCWNHolderClass(JS_GetClass(obj)), "trying to wrap a holder");
MOZ_ASSERT(!js::IsInnerObject(obj));
// We sometimes end up here after nsContentUtils has been shut down but before
// XPConnect has been shut down, so check the context stack the roundabout way.
MOZ_ASSERT(XPCJSRuntime::Get()->GetJSContextStack()->Peek() == cx);
// Compute the information we need to select the right wrapper.
JSCompartment *origin = js::GetObjectCompartment(obj);
JSCompartment *target = js::GetContextCompartment(cx);
bool originIsChrome = AccessCheck::isChrome(origin);
bool targetIsChrome = AccessCheck::isChrome(target);
bool originSubsumesTarget = AccessCheck::subsumesConsideringDomain(origin, target);
bool targetSubsumesOrigin = AccessCheck::subsumesConsideringDomain(target, origin);
bool sameOrigin = targetSubsumesOrigin && originSubsumesTarget;
XrayType xrayType = GetXrayType(obj);
const Wrapper *wrapper;
//
// First, handle the special cases.
//
// If UniversalXPConnect is enabled, this is just some dumb mochitest. Use
// a vanilla CCW.
if (xpc::IsUniversalXPConnectEnabled(target)) {
CrashIfNotInAutomation();
wrapper = &CrossCompartmentWrapper::singleton;
}
// Let the SpecialPowers scope make its stuff easily accessible to content.
else if (CompartmentPrivate::Get(origin)->forcePermissiveCOWs) {
CrashIfNotInAutomation();
wrapper = &CrossCompartmentWrapper::singleton;
}
// If this is a chrome object being exposed to content without Xrays, use
// a COW.
//
// We make an exception for Object instances, because we still rely on COWs
// for those in a lot of places in the tree.
else if (originIsChrome && !targetIsChrome &&
(xrayType == NotXray || ForceCOWBehavior(obj)))
{
wrapper = &ChromeObjectWrapper::singleton;
}
//
// Now, handle the regular cases.
//
// These are wrappers we can compute using a rule-based approach. In order
// to do so, we need to compute some parameters.
//
else {
// The wrapper is a security wrapper (protecting the wrappee) if and
// only if the target does not subsume the origin.
bool securityWrapper = !targetSubsumesOrigin;
// Xrays are warranted if either the target or the origin don't trust
// each other. This is generally the case, unless the two are same-origin
// and the caller has not requested same-origin Xrays.
//
// Xrays are a bidirectional protection, since it affords clarity to the
// caller and privacy to the callee.
bool sameOriginXrays = CompartmentPrivate::Get(origin)->wantXrays ||
CompartmentPrivate::Get(target)->wantXrays;
bool wantXrays = !sameOrigin || sameOriginXrays;
// If Xrays are warranted, the caller may waive them for non-security
// wrappers.
bool waiveXrays = wantXrays && !securityWrapper && HasWaiveXrayFlag(obj);
// We have slightly different behavior for the case when the object
// being wrapped is in an XBL scope.
bool originIsContentXBLScope = IsContentXBLScope(origin);
wrapper = SelectWrapper(securityWrapper, wantXrays, xrayType, waiveXrays,
originIsContentXBLScope);
// If we want to apply add-on interposition in the target compartment,
// then we try to "upgrade" the wrapper to an interposing one.
if (CompartmentPrivate::Get(target)->scope->HasInterposition())
wrapper = SelectAddonWrapper(cx, obj, wrapper);
}
if (!targetSubsumesOrigin) {
// Do a belt-and-suspenders check against exposing eval()/Function() to
// non-subsuming content.
if (JSFunction *fun = JS_GetObjectFunction(obj)) {
if (JS_IsBuiltinEvalFunction(fun) || JS_IsBuiltinFunctionConstructor(fun)) {
NS_WARNING("Trying to expose eval or Function to non-subsuming content!");
wrapper = &FilteringWrapper<CrossCompartmentSecurityWrapper, Opaque>::singleton;
}
}
}
DEBUG_CheckUnwrapSafety(obj, wrapper, origin, target);
if (existing)
return Wrapper::Renew(cx, existing, obj, wrapper);
return Wrapper::New(cx, obj, parent, wrapper);
}
JSObject *
WrapperFactory::Rewrap(JSContext *cx, HandleObject existing, HandleObject obj,
HandleObject wrappedProto, HandleObject parent,
unsigned flags)
{
MOZ_ASSERT(!IsWrapper(obj) ||
GetProxyHandler(obj) == &XrayWaiver ||
js::GetObjectClass(obj)->ext.innerObject,
"wrapped object passed to rewrap");
MOZ_ASSERT(JS_GetClass(obj) != &XrayUtils::HolderClass, "trying to wrap a holder");
MOZ_ASSERT(!js::IsInnerObject(obj));
// We sometimes end up here after nsContentUtils has been shut down but before
// XPConnect has been shut down, so check the context stack the roundabout way.
MOZ_ASSERT(XPCJSRuntime::Get()->GetJSContextStack()->Peek() == cx);
// Compute the information we need to select the right wrapper.
JSCompartment *origin = js::GetObjectCompartment(obj);
JSCompartment *target = js::GetContextCompartment(cx);
bool originIsChrome = AccessCheck::isChrome(origin);
bool targetIsChrome = AccessCheck::isChrome(target);
bool originSubsumesTarget = AccessCheck::subsumes(origin, target);
bool targetSubsumesOrigin = AccessCheck::subsumes(target, origin);
bool sameOrigin = targetSubsumesOrigin && originSubsumesTarget;
XrayType xrayType = GetXrayType(obj);
bool waiveXrayFlag = flags & WAIVE_XRAY_WRAPPER_FLAG;
// By default we use the wrapped proto of the underlying object as the
// prototype for our wrapper, but we may select something different below.
RootedObject proxyProto(cx, wrappedProto);
Wrapper *wrapper;
CompartmentPrivate *targetdata = EnsureCompartmentPrivate(target);
//
// First, handle the special cases.
//
// If UniversalXPConnect is enabled, this is just some dumb mochitest. Use
// a vanilla CCW.
if (xpc::IsUniversalXPConnectEnabled(target)) {
wrapper = &CrossCompartmentWrapper::singleton;
// If this is a chrome object being exposed to content without Xrays, use
// a COW.
} else if (originIsChrome && !targetIsChrome && xrayType == NotXray) {
wrapper = &ChromeObjectWrapper::singleton;
// If content is accessing a Components object or NAC, we need a special filter,
// even if the object is same origin.
} else if (IsComponentsObject(obj) && !AccessCheck::isChrome(target)) {
wrapper = &FilteringWrapper<CrossCompartmentSecurityWrapper,
ComponentsObjectPolicy>::singleton;
} else if (AccessCheck::needsSystemOnlyWrapper(obj) &&
!(targetIsChrome || (targetSubsumesOrigin && nsContentUtils::IsCallerXBL())))
{
wrapper = &FilteringWrapper<CrossCompartmentSecurityWrapper,
OnlyIfSubjectIsSystem>::singleton;
}
// Normally, a non-xrayable non-waived content object that finds itself in
// a privileged scope is wrapped with a CrossCompartmentWrapper, even though
// the lack of a waiver _really_ should give it an opaque wrapper. This is
// a bit too entrenched to change for content-chrome, but we can at least fix
// it for XBL scopes.
//
// See bug 843829.
else if (targetSubsumesOrigin && !originSubsumesTarget &&
!waiveXrayFlag && xrayType == NotXray &&
IsXBLScope(target))
{
wrapper = &FilteringWrapper<CrossCompartmentSecurityWrapper, GentlyOpaque>::singleton;
}
//
// Now, handle the regular cases.
//
// These are wrappers we can compute using a rule-based approach. In order
// to do so, we need to compute some parameters.
//
else {
// The wrapper is a security wrapper (protecting the wrappee) if and
// only if the target does not subsume the origin.
bool securityWrapper = !targetSubsumesOrigin;
// Xrays are warranted if either the target or the origin don't trust
// each other. This is generally the case, unless the two are same-origin
// and the caller has not requested same-origin Xrays.
//
// Xrays are a bidirectional protection, since it affords clarity to the
// caller and privacy to the callee.
bool wantXrays = !(sameOrigin && !targetdata->wantXrays);
// If Xrays are warranted, the caller may waive them for non-security
// wrappers.
bool waiveXrays = wantXrays && !securityWrapper && waiveXrayFlag;
wrapper = SelectWrapper(securityWrapper, wantXrays, xrayType, waiveXrays);
}
// If the prototype of a chrome object being wrapped in content is a prototype
// for a standard class, use the one from the content compartment so
// that we can safely take advantage of things like .forEach().
//
// If the prototype chain of chrome object |obj| looks like this:
//
// obj => foo => bar => chromeWin.StandardClass.prototype
//
// The prototype chain of COW(obj) looks lke this:
//
// COW(obj) => COW(foo) => COW(bar) => contentWin.StandardClass.prototype
if (wrapper == &ChromeObjectWrapper::singleton) {
JSProtoKey key = JSProto_Null;
{
JSAutoCompartment ac(cx, obj);
RootedObject unwrappedProto(cx);
if (!js::GetObjectProto(cx, obj, unwrappedProto.address()))
return NULL;
if (unwrappedProto && IsCrossCompartmentWrapper(unwrappedProto))
unwrappedProto = Wrapper::wrappedObject(unwrappedProto);
if (unwrappedProto) {
JSAutoCompartment ac2(cx, unwrappedProto);
key = JS_IdentifyClassPrototype(cx, unwrappedProto);
}
}
if (key != JSProto_Null) {
RootedObject homeProto(cx);
if (!JS_GetClassPrototype(cx, key, homeProto.address()))
return NULL;
MOZ_ASSERT(homeProto);
proxyProto = homeProto;
}
// This shouldn't happen, but do a quick check to make some dumb addon
// doesn't expose chrome eval or Function().
JSFunction *fun = JS_GetObjectFunction(obj);
if (fun) {
if (JS_IsBuiltinEvalFunction(fun) || JS_IsBuiltinFunctionConstructor(fun)) {
JS_ReportError(cx, "Not allowed to access chrome eval or Function from content");
return nullptr;
}
}
}
DEBUG_CheckUnwrapSafety(obj, wrapper, origin, target);
if (existing && proxyProto == wrappedProto)
return Wrapper::Renew(cx, existing, obj, wrapper);
return Wrapper::New(cx, obj, proxyProto, parent, wrapper);
}
JSObject*
WrapperFactory::Rewrap(JSContext* cx, HandleObject existing, HandleObject obj)
{
MOZ_ASSERT(!IsWrapper(obj) ||
GetProxyHandler(obj) == &XrayWaiver ||
js::IsWindowProxy(obj),
"wrapped object passed to rewrap");
MOZ_ASSERT(!XrayUtils::IsXPCWNHolderClass(JS_GetClass(obj)), "trying to wrap a holder");
MOZ_ASSERT(!js::IsWindow(obj));
MOZ_ASSERT(dom::IsJSAPIActive());
// Compute the information we need to select the right wrapper.
JSCompartment* origin = js::GetObjectCompartment(obj);
JSCompartment* target = js::GetContextCompartment(cx);
bool originIsChrome = AccessCheck::isChrome(origin);
bool targetIsChrome = AccessCheck::isChrome(target);
bool originSubsumesTarget = AccessCheck::subsumesConsideringDomain(origin, target);
bool targetSubsumesOrigin = AccessCheck::subsumesConsideringDomain(target, origin);
bool sameOrigin = targetSubsumesOrigin && originSubsumesTarget;
XrayType xrayType = GetXrayType(obj);
const Wrapper* wrapper;
//
// First, handle the special cases.
//
// If UniversalXPConnect is enabled, this is just some dumb mochitest. Use
// a vanilla CCW.
if (xpc::IsUniversalXPConnectEnabled(target)) {
CrashIfNotInAutomation();
wrapper = &CrossCompartmentWrapper::singleton;
}
// Let the SpecialPowers scope make its stuff easily accessible to content.
else if (CompartmentPrivate::Get(origin)->forcePermissiveCOWs) {
CrashIfNotInAutomation();
wrapper = &CrossCompartmentWrapper::singleton;
}
// Special handling for chrome objects being exposed to content.
else if (originIsChrome && !targetIsChrome) {
// If this is a chrome function being exposed to content, we need to allow
// call (but nothing else). We allow CPOWs that purport to be function's
// here, but only in the content process.
if ((IdentifyStandardInstance(obj) == JSProto_Function ||
(jsipc::IsCPOW(obj) && JS::IsCallable(obj) &&
XRE_IsContentProcess())))
{
wrapper = &FilteringWrapper<CrossCompartmentSecurityWrapper, OpaqueWithCall>::singleton;
}
// For Vanilla JSObjects exposed from chrome to content, we use a wrapper
// that supports __exposedProps__. We'd like to get rid of these eventually,
// but in their current form they don't cause much trouble.
else if (IdentifyStandardInstance(obj) == JSProto_Object) {
wrapper = &ChromeObjectWrapper::singleton;
}
// Otherwise we get an opaque wrapper.
else {
wrapper = &FilteringWrapper<CrossCompartmentSecurityWrapper, Opaque>::singleton;
}
}
//
// Now, handle the regular cases.
//
// These are wrappers we can compute using a rule-based approach. In order
// to do so, we need to compute some parameters.
//
else {
// The wrapper is a security wrapper (protecting the wrappee) if and
// only if the target does not subsume the origin.
bool securityWrapper = !targetSubsumesOrigin;
// Xrays are warranted if either the target or the origin don't trust
// each other. This is generally the case, unless the two are same-origin
// and the caller has not requested same-origin Xrays.
//
// Xrays are a bidirectional protection, since it affords clarity to the
// caller and privacy to the callee.
bool sameOriginXrays = CompartmentPrivate::Get(origin)->wantXrays ||
CompartmentPrivate::Get(target)->wantXrays;
bool wantXrays = !sameOrigin || sameOriginXrays;
// If Xrays are warranted, the caller may waive them for non-security
// wrappers (unless explicitly forbidden from doing so).
bool waiveXrays = wantXrays && !securityWrapper &&
CompartmentPrivate::Get(target)->allowWaivers &&
HasWaiveXrayFlag(obj);
// We have slightly different behavior for the case when the object
// being wrapped is in an XBL scope.
bool originIsContentXBLScope = IsContentXBLScope(origin);
wrapper = SelectWrapper(securityWrapper, wantXrays, xrayType, waiveXrays,
originIsContentXBLScope, obj);
// If we want to apply add-on interposition in the target compartment,
// then we try to "upgrade" the wrapper to an interposing one.
if (CompartmentPrivate::Get(target)->scope->HasInterposition())
wrapper = SelectAddonWrapper(cx, obj, wrapper);
}
if (!targetSubsumesOrigin) {
// Do a belt-and-suspenders check against exposing eval()/Function() to
// non-subsuming content.
if (JSFunction* fun = JS_GetObjectFunction(obj)) {
if (JS_IsBuiltinEvalFunction(fun) || JS_IsBuiltinFunctionConstructor(fun)) {
NS_WARNING("Trying to expose eval or Function to non-subsuming content!");
wrapper = &FilteringWrapper<CrossCompartmentSecurityWrapper, Opaque>::singleton;
}
}
}
DEBUG_CheckUnwrapSafety(obj, wrapper, origin, target);
if (existing)
return Wrapper::Renew(cx, existing, obj, wrapper);
return Wrapper::New(cx, obj, wrapper);
}
