};
#define DECLARE_SII_DEV(p_ops) \
{ \
.name = DRV_NAME, \
.init_chipset = init_chipset_siimage, \
.init_iops = init_iops_siimage, \
.port_ops = p_ops, \
.dma_ops = &sil_dma_ops, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = ATA_UDMA6, \
}
static const struct ide_port_info siimage_chipsets[] __devinitdata = {
DECLARE_SII_DEV(&sil_pata_port_ops),
DECLARE_SII_DEV(&sil_sata_port_ops)
};
static int __devinit siimage_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
{
void __iomem *ioaddr = NULL;
resource_size_t bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
int rc;
struct ide_port_info d;
u8 idx = id->driver_data;
u8 BA5_EN;
}
#define DECLARE_SII_DEV(name_str) \
{ \
.name = name_str, \
.init_chipset = init_chipset_siimage, \
.init_iops = init_iops_siimage, \
.init_hwif = init_hwif_siimage, \
.fixup = siimage_fixup, \
.channels = 2, \
.autodma = AUTODMA, \
.bootable = ON_BOARD, \
}
static ide_pci_device_t siimage_chipsets[] __devinitdata = {
/* 0 */ DECLARE_SII_DEV("SiI680"),
/* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"),
/* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA")
};
/**
* siimage_init_one - pci layer discovery entry
* @dev: PCI device
* @id: ident table entry
*
* Called by the PCI code when it finds an SI680 or SI3112 controller.
* We then use the IDE PCI generic helper to do most of the work.
*/
static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
};
#define DECLARE_SII_DEV(p_ops) \
{ \
.name = DRV_NAME, \
.init_chipset = init_chipset_siimage, \
.init_iops = init_iops_siimage, \
.port_ops = p_ops, \
.dma_ops = &sil_dma_ops, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = ATA_UDMA6, \
}
static const struct ide_port_info siimage_chipsets[] __devinitdata = {
/* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops),
/* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
};
static int __devinit siimage_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
{
void __iomem *ioaddr = NULL;
resource_size_t bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
int rc;
struct ide_port_info d;
u8 idx = id->driver_data;
u8 BA5_EN;
};
#define DECLARE_SII_DEV(name_str, p_ops) \
{ \
.name = name_str, \
.init_chipset = init_chipset_siimage, \
.init_iops = init_iops_siimage, \
.port_ops = p_ops, \
.dma_ops = &sil_dma_ops, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = ATA_UDMA6, \
}
static const struct ide_port_info siimage_chipsets[] __devinitdata = {
/* 0 */ DECLARE_SII_DEV("SiI680", &sil_pata_port_ops),
/* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA", &sil_sata_port_ops),
/* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA", &sil_sata_port_ops)
};
/**
* siimage_init_one - PCI layer discovery entry
* @dev: PCI device
* @id: ident table entry
*
* Called by the PCI code when it finds an SiI680 or SiI3112 controller.
* We then use the IDE PCI generic helper to do most of the work.
*/
static int __devinit siimage_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
