NTSTATUS
Bus_FDO_PnP (
__in PDEVICE_OBJECT DeviceObject,
__in PIRP Irp,
__in PIO_STACK_LOCATION IrpStack,
__in PFDO_DEVICE_DATA DeviceData
)
/*++
Routine Description:
Handle requests from the Plug & Play system for the BUS itself
--*/
{
NTSTATUS status;
ULONG length, prevcount, numPdosPresent;
PLIST_ENTRY entry, listHead, nextEntry;
PPDO_DEVICE_DATA pdoData;
PDEVICE_RELATIONS relations, oldRelations;
PAGED_CODE ();
Bus_IncIoCount (DeviceData);
switch (IrpStack->MinorFunction) {
case IRP_MN_START_DEVICE:
//
// Send the Irp down and wait for it to come back.
// Do not touch the hardware until then.
//
status = Bus_SendIrpSynchronously (DeviceData->NextLowerDriver, Irp);
if (NT_SUCCESS(status)) {
//
// Initialize your device with the resources provided
// by the PnP manager to your device.
//
status = Bus_StartFdo (DeviceData, Irp);
}
//
// We must now complete the IRP, since we stopped it in the
// completion routine with MORE_PROCESSING_REQUIRED.
//
Irp->IoStatus.Status = status;
IoCompleteRequest (Irp, IO_NO_INCREMENT);
Bus_DecIoCount (DeviceData);
return status;
case IRP_MN_QUERY_STOP_DEVICE:
//
// The PnP manager is trying to stop the device
// for resource rebalancing. Fail this now if you
// cannot stop the device in response to STOP_DEVICE.
//
SET_NEW_PNP_STATE(DeviceData, StopPending);
Irp->IoStatus.Status = STATUS_SUCCESS; // You must not fail the IRP.
break;
case IRP_MN_CANCEL_STOP_DEVICE:
//
// The PnP Manager sends this IRP, at some point after an
// IRP_MN_QUERY_STOP_DEVICE, to inform the drivers for a
// device that the device will not be stopped for
// resource reconfiguration.
//
//
// First check to see whether you have received cancel-stop
// without first receiving a query-stop. This could happen if
// someone above us fails a query-stop and passes down the subsequent
// cancel-stop.
//
if (StopPending == DeviceData->DevicePnPState)
{
//
// We did receive a query-stop, so restore.
//
RESTORE_PREVIOUS_PNP_STATE(DeviceData);
ASSERT(DeviceData->DevicePnPState == Started);
}
Irp->IoStatus.Status = STATUS_SUCCESS; // We must not fail the IRP.
break;
case IRP_MN_STOP_DEVICE:
//
// Stop device means that the resources given during Start device
// are now revoked. Note: You must not fail this Irp.
// But before you relieve resources make sure there are no I/O in
// progress. Wait for the existing ones to be finished.
// To do that, first we will decrement this very operation.
// When the counter goes to 1, Stop event is set.
//
Bus_DecIoCount(DeviceData);
KeWaitForSingleObject(
&DeviceData->StopEvent,
Executive, // Waiting reason of a driver
KernelMode, // Waiting in kernel mode
FALSE, // No allert
NULL); // No timeout
//
// Increment the counter back because this IRP has to
// be sent down to the lower stack.
//
Bus_IncIoCount (DeviceData);
//
// Free resources given by start device.
//
SET_NEW_PNP_STATE(DeviceData, Stopped);
//
// We don't need a completion routine so fire and forget.
//
// Set the current stack location to the next stack location and
// call the next device object.
//
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
case IRP_MN_QUERY_REMOVE_DEVICE:
//
// If we were to fail this call then we would need to complete the
// IRP here. Since we are not, set the status to SUCCESS and
// call the next driver.
//
SET_NEW_PNP_STATE(DeviceData, RemovePending);
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
case IRP_MN_CANCEL_REMOVE_DEVICE:
//
// If we were to fail this call then we would need to complete the
// IRP here. Since we are not, set the status to SUCCESS and
// call the next driver.
//
//
// First check to see whether you have received cancel-remove
// without first receiving a query-remove. This could happen if
// someone above us fails a query-remove and passes down the
// subsequent cancel-remove.
//
if (RemovePending == DeviceData->DevicePnPState)
{
//
// We did receive a query-remove, so restore.
//
RESTORE_PREVIOUS_PNP_STATE(DeviceData);
}
Irp->IoStatus.Status = STATUS_SUCCESS;// You must not fail the IRP.
break;
case IRP_MN_SURPRISE_REMOVAL:
//
// The device has been unexpectedly removed from the machine
// and is no longer available for I/O. Bus_RemoveFdo clears
// all the resources, frees the interface and de-registers
// with WMI, but it doesn't delete the FDO. That's done
// later in Remove device query.
//
SET_NEW_PNP_STATE(DeviceData, SurpriseRemovePending);
Bus_RemoveFdo(DeviceData);
ExAcquireFastMutex (&DeviceData->Mutex);
listHead = &DeviceData->ListOfPDOs;
for(entry = listHead->Flink,nextEntry = entry->Flink;
entry != listHead;
entry = nextEntry,nextEntry = entry->Flink) {
pdoData = CONTAINING_RECORD (entry, PDO_DEVICE_DATA, Link);
RemoveEntryList (&pdoData->Link);
InitializeListHead (&pdoData->Link);
pdoData->ParentFdo = NULL;
pdoData->ReportedMissing = TRUE;
}
ExReleaseFastMutex (&DeviceData->Mutex);
Irp->IoStatus.Status = STATUS_SUCCESS; // You must not fail the IRP.
break;
case IRP_MN_REMOVE_DEVICE:
//
// The Plug & Play system has dictated the removal of this device.
// We have no choice but to detach and delete the device object.
//
//
// Check the state flag to see whether you are surprise removed
//
if (DeviceData->DevicePnPState != SurpriseRemovePending)
{
Bus_RemoveFdo(DeviceData);
}
SET_NEW_PNP_STATE(DeviceData, Deleted);
//
// Wait for all outstanding requests to complete.
// We need two decrements here, one for the increment in
// the beginning of this function, the other for the 1-biased value of
// OutstandingIO.
//
Bus_DecIoCount (DeviceData);
//
// The requestCount is at least one here (is 1-biased)
//
Bus_DecIoCount (DeviceData);
KeWaitForSingleObject (
&DeviceData->RemoveEvent,
Executive,
KernelMode,
FALSE,
NULL);
//
// Typically the system removes all the children before
// removing the parent FDO. If for any reason child Pdos are
// still present we will destroy them explicitly, with one exception -
// we will not delete the PDOs that are in SurpriseRemovePending state.
//
ExAcquireFastMutex (&DeviceData->Mutex);
listHead = &DeviceData->ListOfPDOs;
for(entry = listHead->Flink,nextEntry = entry->Flink;
entry != listHead;
entry = nextEntry,nextEntry = entry->Flink) {
pdoData = CONTAINING_RECORD (entry, PDO_DEVICE_DATA, Link);
RemoveEntryList (&pdoData->Link);
if (SurpriseRemovePending == pdoData->DevicePnPState)
{
//
// We will reinitialize the list head so that we
// wouldn't barf when we try to delink this PDO from
// the parent's PDOs list, when the system finally
// removes the PDO. Let's also not forget to set the
// ReportedMissing flag to cause the deletion of the PDO.
//
Bus_KdPrint_Cont(DeviceData, BUS_DBG_PNP_INFO,
("\tFound a surprise removed device: 0x%p\n", pdoData->Self));
InitializeListHead (&pdoData->Link);
pdoData->ParentFdo = NULL;
pdoData->ReportedMissing = TRUE;
continue;
}
DeviceData->NumPDOs--;
Bus_DestroyPdo (pdoData->Self, pdoData);
}
ExReleaseFastMutex (&DeviceData->Mutex);
//
// We need to send the remove down the stack before we detach,
// but we don't need to wait for the completion of this operation
// (and to register a completion routine).
//
Irp->IoStatus.Status = STATUS_SUCCESS;
IoSkipCurrentIrpStackLocation (Irp);
status = IoCallDriver (DeviceData->NextLowerDriver, Irp);
//
// Detach from the underlying devices.
//
IoDetachDevice (DeviceData->NextLowerDriver);
Bus_KdPrint_Cont(DeviceData, BUS_DBG_PNP_INFO,
("\tDeleting FDO: 0x%p\n", DeviceObject));
IoDeleteDevice (DeviceObject);
return status;
case IRP_MN_QUERY_DEVICE_RELATIONS:
Bus_KdPrint_Cont (DeviceData, BUS_DBG_PNP_TRACE,
("\tQueryDeviceRelation Type: %s\n",
DbgDeviceRelationString(\
IrpStack->Parameters.QueryDeviceRelations.Type)));
if (BusRelations != IrpStack->Parameters.QueryDeviceRelations.Type) {
//
// We don't support any other Device Relations
//
break;
}
//
// Tell the plug and play system about all the PDOs.
//
// There might also be device relations below and above this FDO,
// so, be sure to propagate the relations from the upper drivers.
//
// No Completion routine is needed so long as the status is preset
// to success. (PDOs complete plug and play irps with the current
// IoStatus.Status and IoStatus.Information as the default.)
//
ExAcquireFastMutex (&DeviceData->Mutex);
oldRelations = (PDEVICE_RELATIONS) Irp->IoStatus.Information;
if (oldRelations) {
prevcount = oldRelations->Count;
if (!DeviceData->NumPDOs) {
//
// There is a device relations struct already present and we have
// nothing to add to it, so just call IoSkip and IoCall
//
ExReleaseFastMutex (&DeviceData->Mutex);
break;
}
}
else {
prevcount = 0;
}
//
// Calculate the number of PDOs actually present on the bus
//
numPdosPresent = 0;
for (entry = DeviceData->ListOfPDOs.Flink;
entry != &DeviceData->ListOfPDOs;
entry = entry->Flink) {
pdoData = CONTAINING_RECORD (entry, PDO_DEVICE_DATA, Link);
if (pdoData->Present)
numPdosPresent++;
}
//
// Need to allocate a new relations structure and add our
// PDOs to it.
//
length = sizeof(DEVICE_RELATIONS) +
((numPdosPresent + prevcount) * sizeof (PDEVICE_OBJECT)) -1;
relations = (PDEVICE_RELATIONS) ExAllocatePoolWithTag (PagedPool,
length, BUSENUM_POOL_TAG);
if (NULL == relations) {
//
// Fail the IRP
//
ExReleaseFastMutex (&DeviceData->Mutex);
Irp->IoStatus.Status = status = STATUS_INSUFFICIENT_RESOURCES;
IoCompleteRequest (Irp, IO_NO_INCREMENT);
Bus_DecIoCount (DeviceData);
return status;
}
//
// Copy in the device objects so far
//
if (prevcount) {
RtlCopyMemory (relations->Objects, oldRelations->Objects,
prevcount * sizeof (PDEVICE_OBJECT));
}
relations->Count = prevcount + numPdosPresent;
//
// For each PDO present on this bus add a pointer to the device relations
// buffer, being sure to take out a reference to that object.
// The Plug & Play system will dereference the object when it is done
// with it and free the device relations buffer.
//
for (entry = DeviceData->ListOfPDOs.Flink;
entry != &DeviceData->ListOfPDOs;
entry = entry->Flink) {
pdoData = CONTAINING_RECORD (entry, PDO_DEVICE_DATA, Link);
if (pdoData->Present) {
relations->Objects[prevcount] = pdoData->Self;
ObReferenceObject (pdoData->Self);
prevcount++;
} else {
pdoData->ReportedMissing = TRUE;
}
}
Bus_KdPrint_Cont (DeviceData, BUS_DBG_PNP_TRACE,
("\t#PDOS present = %d\n\t#PDOs reported = %d\n",
DeviceData->NumPDOs, relations->Count));
//
// Replace the relations structure in the IRP with the new
// one.
//
if (oldRelations) {
ExFreePool (oldRelations);
}
Irp->IoStatus.Information = (ULONG_PTR) relations;
ExReleaseFastMutex (&DeviceData->Mutex);
//
// Set up and pass the IRP further down the stack
//
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
default:
//
// In the default case we merely call the next driver.
// We must not modify Irp->IoStatus.Status or complete the IRP.
//
break;
}
IoSkipCurrentIrpStackLocation (Irp);
status = IoCallDriver (DeviceData->NextLowerDriver, Irp);
Bus_DecIoCount (DeviceData);
return status;
}
NTSTATUS
Bus_FDO_PnP (
PDEVICE_OBJECT DeviceObject,
PIRP Irp,
PIO_STACK_LOCATION IrpStack,
PFDO_DEVICE_DATA DeviceData
)
{
NTSTATUS status;
ULONG length, prevcount, numPdosPresent;
PLIST_ENTRY entry;
PPDO_DEVICE_DATA pdoData;
PDEVICE_RELATIONS relations, oldRelations;
PAGED_CODE ();
switch (IrpStack->MinorFunction) {
case IRP_MN_START_DEVICE:
status = Bus_StartFdo (DeviceData, Irp);
//
// We must now complete the IRP, since we stopped it in the
// completion routine with MORE_PROCESSING_REQUIRED.
//
Irp->IoStatus.Status = status;
IoCompleteRequest (Irp, IO_NO_INCREMENT);
return status;
case IRP_MN_QUERY_STOP_DEVICE:
//
// The PnP manager is trying to stop the device
// for resource rebalancing.
//
SET_NEW_PNP_STATE(DeviceData->Common, StopPending);
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
case IRP_MN_CANCEL_STOP_DEVICE:
//
// The PnP Manager sends this IRP, at some point after an
// IRP_MN_QUERY_STOP_DEVICE, to inform the drivers for a
// device that the device will not be stopped for
// resource reconfiguration.
//
//
// First check to see whether you have received cancel-stop
// without first receiving a query-stop. This could happen if
// someone above us fails a query-stop and passes down the subsequent
// cancel-stop.
//
if (StopPending == DeviceData->Common.DevicePnPState)
{
//
// We did receive a query-stop, so restore.
//
RESTORE_PREVIOUS_PNP_STATE(DeviceData->Common);
ASSERT(DeviceData->Common.DevicePnPState == Started);
}
Irp->IoStatus.Status = STATUS_SUCCESS; // We must not fail the IRP.
break;
case IRP_MN_QUERY_DEVICE_RELATIONS:
DPRINT("\tQueryDeviceRelation Type: %s\n",
DbgDeviceRelationString(\
IrpStack->Parameters.QueryDeviceRelations.Type));
if (BusRelations != IrpStack->Parameters.QueryDeviceRelations.Type) {
//
// We don't support any other Device Relations
//
break;
}
ExAcquireFastMutex (&DeviceData->Mutex);
oldRelations = (PDEVICE_RELATIONS) Irp->IoStatus.Information;
if (oldRelations) {
prevcount = oldRelations->Count;
if (!DeviceData->NumPDOs) {
//
// There is a device relations struct already present and we have
// nothing to add to it, so just call IoSkip and IoCall
//
ExReleaseFastMutex (&DeviceData->Mutex);
break;
}
}
else {
prevcount = 0;
}
//
// Calculate the number of PDOs actually present on the bus
//
numPdosPresent = 0;
for (entry = DeviceData->ListOfPDOs.Flink;
entry != &DeviceData->ListOfPDOs;
entry = entry->Flink) {
pdoData = CONTAINING_RECORD (entry, PDO_DEVICE_DATA, Link);
numPdosPresent++;
}
//
// Need to allocate a new relations structure and add our
// PDOs to it.
//
length = sizeof(DEVICE_RELATIONS) +
(((numPdosPresent + prevcount) - 1) * sizeof (PDEVICE_OBJECT));
relations = ExAllocatePoolWithTag(PagedPool, length, 'IpcA');
if (NULL == relations) {
//
// Fail the IRP
//
ExReleaseFastMutex (&DeviceData->Mutex);
Irp->IoStatus.Status = status = STATUS_INSUFFICIENT_RESOURCES;
IoCompleteRequest (Irp, IO_NO_INCREMENT);
return status;
}
//
// Copy in the device objects so far
//
if (prevcount) {
RtlCopyMemory (relations->Objects, oldRelations->Objects,
prevcount * sizeof (PDEVICE_OBJECT));
}
relations->Count = prevcount + numPdosPresent;
//
// For each PDO present on this bus add a pointer to the device relations
// buffer, being sure to take out a reference to that object.
// The Plug & Play system will dereference the object when it is done
// with it and free the device relations buffer.
//
for (entry = DeviceData->ListOfPDOs.Flink;
entry != &DeviceData->ListOfPDOs;
entry = entry->Flink) {
pdoData = CONTAINING_RECORD (entry, PDO_DEVICE_DATA, Link);
relations->Objects[prevcount] = pdoData->Common.Self;
ObReferenceObject (pdoData->Common.Self);
prevcount++;
}
DPRINT("\t#PDOs present = %d\n\t#PDOs reported = %d\n",
DeviceData->NumPDOs, relations->Count);
//
// Replace the relations structure in the IRP with the new
// one.
//
if (oldRelations) {
ExFreePoolWithTag(oldRelations, 0);
}
Irp->IoStatus.Information = (ULONG_PTR) relations;
ExReleaseFastMutex (&DeviceData->Mutex);
//
// Set up and pass the IRP further down the stack
//
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
default:
//
// In the default case we merely call the next driver.
// We must not modify Irp->IoStatus.Status or complete the IRP.
//
break;
}
IoSkipCurrentIrpStackLocation (Irp);
status = IoCallDriver (DeviceData->NextLowerDriver, Irp);
return STATUS_SUCCESS;
}
NTSTATUS
Bus_PDO_PnP (
__in PDEVICE_OBJECT DeviceObject,
__in PIRP Irp,
__in PIO_STACK_LOCATION IrpStack,
__in PPDO_DEVICE_DATA DeviceData
)
/*++
Routine Description:
Handle requests from the Plug & Play system for the devices on the BUS
--*/
{
NTSTATUS status;
PAGED_CODE ();
//
// NB: Because we are a bus enumerator, we have no one to whom we could
// defer these irps. Therefore we do not pass them down but merely
// return them.
//
switch (IrpStack->MinorFunction) {
case IRP_MN_START_DEVICE:
//
// Here we do what ever initialization and ``turning on'' that is
// required to allow others to access this device.
// Power up the device.
//
DeviceData->DevicePowerState = PowerDeviceD0;
SET_NEW_PNP_STATE(DeviceData, Started);
status = STATUS_SUCCESS;
break;
case IRP_MN_STOP_DEVICE:
//
// Here we shut down the device and give up and unmap any resources
// we acquired for the device.
//
SET_NEW_PNP_STATE(DeviceData, Stopped);
status = STATUS_SUCCESS;
break;
case IRP_MN_QUERY_STOP_DEVICE:
//
// No reason here why we can't stop the device.
// If there were a reason we should speak now, because answering success
// here may result in a stop device irp.
//
SET_NEW_PNP_STATE(DeviceData, StopPending);
status = STATUS_SUCCESS;
break;
case IRP_MN_CANCEL_STOP_DEVICE:
//
// The stop was canceled. Whatever state we set, or resources we put
// on hold in anticipation of the forthcoming STOP device IRP should be
// put back to normal. Someone, in the long list of concerned parties,
// has failed the stop device query.
//
//
// First check to see whether you have received cancel-stop
// without first receiving a query-stop. This could happen if someone
// above us fails a query-stop and passes down the subsequent
// cancel-stop.
//
if (StopPending == DeviceData->DevicePnPState)
{
//
// We did receive a query-stop, so restore.
//
RESTORE_PREVIOUS_PNP_STATE(DeviceData);
}
status = STATUS_SUCCESS;// We must not fail this IRP.
break;
case IRP_MN_QUERY_REMOVE_DEVICE:
//
// Check to see whether the device can be removed safely.
// If not fail this request. This is the last opportunity
// to do so.
//
if (DeviceData->ToasterInterfaceRefCount){
//
// Somebody is still using our interface.
// We must fail remove.
//
status = STATUS_UNSUCCESSFUL;
break;
}
SET_NEW_PNP_STATE(DeviceData, RemovePending);
status = STATUS_SUCCESS;
break;
case IRP_MN_CANCEL_REMOVE_DEVICE:
//
// Clean up a remove that did not go through.
//
//
// First check to see whether you have received cancel-remove
// without first receiving a query-remove. This could happen if
// someone above us fails a query-remove and passes down the
// subsequent cancel-remove.
//
if (RemovePending == DeviceData->DevicePnPState)
{
//
// We did receive a query-remove, so restore.
//
RESTORE_PREVIOUS_PNP_STATE(DeviceData);
}
status = STATUS_SUCCESS; // We must not fail this IRP.
break;
case IRP_MN_SURPRISE_REMOVAL:
//
// We should stop all access to the device and relinquish all the
// resources. Let's just mark that it happened and we will do
// the cleanup later in IRP_MN_REMOVE_DEVICE.
//
SET_NEW_PNP_STATE(DeviceData, SurpriseRemovePending);
status = STATUS_SUCCESS;
break;
case IRP_MN_REMOVE_DEVICE:
//
// Present is set to true when the pdo is exposed via PlugIn IOCTL.
// It is set to FALSE when a UnPlug IOCTL is received.
// We will delete the PDO only after we have reported to the
// Plug and Play manager that it's missing.
//
if (DeviceData->ReportedMissing) {
PFDO_DEVICE_DATA fdoData;
SET_NEW_PNP_STATE(DeviceData, Deleted);
//
// Remove the PDO from the list and decrement the count of PDO.
// Don't forget to synchronize access to the FDO data.
// If the parent FDO is deleted before child PDOs, the ParentFdo
// pointer will be NULL. This could happen if the child PDO
// is in a SurpriseRemovePending state when the parent FDO
// is removed.
//
if (DeviceData->ParentFdo) {
fdoData = FDO_FROM_PDO(DeviceData);
ExAcquireFastMutex (&fdoData->Mutex);
RemoveEntryList (&DeviceData->Link);
fdoData->NumPDOs--;
ExReleaseFastMutex (&fdoData->Mutex);
}
//
// Free up resources associated with PDO and delete it.
//
status = Bus_DestroyPdo(DeviceObject, DeviceData);
break;
}
if (DeviceData->Present) {
//
// When the device is disabled, the PDO transitions from
// RemovePending to NotStarted. We shouldn't delete
// the PDO because a) the device is still present on the bus,
// b) we haven't reported missing to the PnP manager.
//
SET_NEW_PNP_STATE(DeviceData, NotStarted);
status = STATUS_SUCCESS;
} else {
ASSERT(DeviceData->Present);
status = STATUS_SUCCESS;
}
break;
case IRP_MN_QUERY_CAPABILITIES:
//
// Return the capabilities of a device, such as whether the device
// can be locked or ejected..etc
//
status = Bus_PDO_QueryDeviceCaps(DeviceData, Irp);
break;
case IRP_MN_QUERY_ID:
// Query the IDs of the device
Bus_KdPrint_Cont (DeviceData, BUS_DBG_PNP_TRACE,
("\tQueryId Type: %s\n",
DbgDeviceIDString(IrpStack->Parameters.QueryId.IdType)));
status = Bus_PDO_QueryDeviceId(DeviceData, Irp);
break;
case IRP_MN_QUERY_DEVICE_RELATIONS:
Bus_KdPrint_Cont (DeviceData, BUS_DBG_PNP_TRACE,
("\tQueryDeviceRelation Type: %s\n",DbgDeviceRelationString(\
IrpStack->Parameters.QueryDeviceRelations.Type)));
status = Bus_PDO_QueryDeviceRelations(DeviceData, Irp);
break;
case IRP_MN_QUERY_DEVICE_TEXT:
status = Bus_PDO_QueryDeviceText(DeviceData, Irp);
break;
case IRP_MN_QUERY_RESOURCES:
status = Bus_PDO_QueryResources(DeviceData, Irp);
break;
case IRP_MN_QUERY_RESOURCE_REQUIREMENTS:
status = Bus_PDO_QueryResourceRequirements(DeviceData, Irp);
break;
case IRP_MN_QUERY_BUS_INFORMATION:
status = Bus_PDO_QueryBusInformation(DeviceData, Irp);
break;
case IRP_MN_DEVICE_USAGE_NOTIFICATION:
//
// OPTIONAL for bus drivers.
// This bus drivers any of the bus's descendants
// (child device, child of a child device, etc.) do not
// contain a memory file namely paging file, dump file,
// or hibernation file. So we fail this Irp.
//
status = STATUS_UNSUCCESSFUL;
break;
case IRP_MN_EJECT:
//
// For the device to be ejected, the device must be in the D3
// device power state (off) and must be unlocked
// (if the device supports locking). Any driver that returns success
// for this IRP must wait until the device has been ejected before
// completing the IRP.
//
DeviceData->Present = FALSE;
status = STATUS_SUCCESS;
break;
case IRP_MN_QUERY_INTERFACE:
//
// This request enables a driver to export a direct-call
// interface to other drivers. A bus driver that exports
// an interface must handle this request for its child
// devices (child PDOs).
//
status = Bus_PDO_QueryInterface(DeviceData, Irp);
break;
case IRP_MN_FILTER_RESOURCE_REQUIREMENTS:
//
// OPTIONAL for bus drivers.
// The PnP Manager sends this IRP to a device
// stack so filter and function drivers can adjust the
// resources required by the device, if appropriate.
//
//break;
//case IRP_MN_QUERY_PNP_DEVICE_STATE:
//
// OPTIONAL for bus drivers.
// The PnP Manager sends this IRP after the drivers for
// a device return success from the IRP_MN_START_DEVICE
// request. The PnP Manager also sends this IRP when a
// driver for the device calls IoInvalidateDeviceState.
//
// break;
//case IRP_MN_READ_CONFIG:
//case IRP_MN_WRITE_CONFIG:
//
// Bus drivers for buses with configuration space must handle
// this request for their child devices. Our devices don't
// have a config space.
//
// break;
//case IRP_MN_SET_LOCK:
//
// Our device is not a lockable device
// so we don't support this Irp.
//
// break;
default:
//
//Bus_KdPrint_Cont (DeviceData, BUS_DBG_PNP_TRACE,("\t Not handled\n"));
// For PnP requests to the PDO that we do not understand we should
// return the IRP WITHOUT setting the status or information fields.
// These fields may have already been set by a filter (eg acpi).
status = Irp->IoStatus.Status;
break;
}
Irp->IoStatus.Status = status;
IoCompleteRequest (Irp, IO_NO_INCREMENT);
return status;
}
NTSTATUS PPJoyBus_PnP_Joy (IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp)
{
NTSTATUS ntStatus;
PIO_STACK_LOCATION IrpStack;
PJOY_DEVICE_DATA JoyDeviceData;
WCHAR LinkNameBuffer[128];
UNICODE_STRING LinkName;
PAGED_CODE();
PPJOY_DBGPRINT (FILE_PNP|PPJOY_FENTRY,("PPJoyBus_PnP_Joy(DeviceObject=0x%p,Irp=0x%p)",DeviceObject,Irp) );
IrpStack = IoGetCurrentIrpStackLocation (Irp);
JoyDeviceData= (PJOY_DEVICE_DATA)DeviceObject->DeviceExtension;
switch(IrpStack->MinorFunction)
{
case IRP_MN_START_DEVICE:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_START_DEVICE") );
ntStatus= PPJoyBus_JoyStartDevice (JoyDeviceData,Irp);
goto CompleteIRP;
case IRP_MN_STOP_DEVICE:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_STOP_DEVICE") );
PPJoyBus_JoyStopDevice (JoyDeviceData,Irp);
/* This routine must always return success. */
ntStatus= STATUS_SUCCESS;
goto CompleteIRP;
case IRP_MN_QUERY_STOP_DEVICE:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_QUERY_STOP_DEVICE") );
/* Always accept stop device request */
ntStatus= STATUS_SUCCESS;
goto CompleteIRP;
case IRP_MN_CANCEL_STOP_DEVICE:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_CANCEL_STOP_DEVICE") );
/* Canceling stop requests always successful */
ntStatus= STATUS_SUCCESS;
goto CompleteIRP;
case IRP_MN_QUERY_REMOVE_DEVICE:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_QUERY_REMOVE_DEVICE") );
/* Always accept remove requests */
ntStatus= STATUS_SUCCESS;
goto CompleteIRP;
case IRP_MN_CANCEL_REMOVE_DEVICE:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_CANCEL_REMOVE_DEVICE") );
/* Cancelling remove requests always successful */
ntStatus= STATUS_SUCCESS;
goto CompleteIRP;
case IRP_MN_QUERY_CAPABILITIES:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_QUERY_CAPABILITIES") );
ntStatus= PPJoyBus_JoyQueryCaps (JoyDeviceData,Irp);
goto CompleteIRP;
case IRP_MN_QUERY_DEVICE_RELATIONS:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_QUERY_DEVICE_RELATIONS type %s",DbgDeviceRelationString(IrpStack->Parameters.QueryDeviceRelations.Type)) );
ntStatus= PPJoyBus_JoyDevRelations (JoyDeviceData,Irp);
goto CompleteIRP;
case IRP_MN_QUERY_RESOURCES:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_QUERY_RESOURCES") );
/* Simply copy the status of the incoming IRP to return back */
ntStatus= Irp->IoStatus.Status;
goto CompleteIRP;
#if 0
case IRP_MN_QUERY_RESOURCE_REQUIREMENTS:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_QUERY_RESOURCE_REQUIREMENTS") );
ntStatus= PPJoyBus_JoyQueryResourceRequirements (JoyDeviceData,Irp);
goto CompleteIRP;
#endif
case IRP_MN_DEVICE_USAGE_NOTIFICATION:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_DEVICE_USAGE_NOTIFICATION") );
ntStatus= STATUS_UNSUCCESSFUL;
goto CompleteIRP;
case IRP_MN_SURPRISE_REMOVAL:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_SURPRISE_REMOVAL") );
/* Simply say request was successful */
ntStatus= STATUS_SUCCESS;
goto CompleteIRP;
case IRP_MN_REMOVE_DEVICE:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_REMOVE_DEVICE") );
/* We stop the device if it wasn't done before the remove */
if (JoyDeviceData->Flags&PPJFLAGS_STARTED)
PPJoyBus_JoyStopDevice (JoyDeviceData,Irp);
/* Set the DeviceExtension flag to say that our device is removed */
JoyDeviceData->Flags|= PPJFLAGS_REMOVED;
/* Leave request to decrease requests counter. Event should be */
/* signaled when last request leaves. Then we will return a */
/* successful status. */
PPJoyBus_LeaveRequest((PCOMMON_DATA)JoyDeviceData);
KeWaitForSingleObject (&JoyDeviceData->RemoveEvent,Executive,KernelMode,FALSE,NULL);
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE2, ("KeWaitForSingleObject on RemoveEvent completed.") );
/* If our Joystick is unplugged (via control panel applet) then we */
/* delete the device object for it as well. Else we only mark it */
/* as being removed. (Can later be AddDevice and START'ed again) */
if (JoyDeviceData->Flags&PPJFLAGS_UNPLUGGED)
{
/* Remove the PDO from joystick list. */
ExAcquireFastMutex (&Globals.Mutex);
RemoveEntryList (&JoyDeviceData->ListEntry);
ExReleaseFastMutex (&Globals.Mutex);
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE2, ("Device unplugged so we will delete the PDO.") );
/* Then nuke the PDO out of existance */
IoDeleteDevice (JoyDeviceData->Self);
}
/* The hardware is still physically present. We are ready to be */
/* started again - so clear the REMOVED flag. Should work. */
JoyDeviceData->Flags&= ~PPJFLAGS_REMOVED;
/* After all that indicate that the request was successful */
ntStatus= STATUS_SUCCESS;
goto CompleteIRP;
case IRP_MN_QUERY_ID:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_QUERY_ID type %s",DbgDeviceIDString(IrpStack->Parameters.QueryId.IdType)) );
ntStatus= PPJoyBus_JoyQueryIDs (JoyDeviceData,Irp);
goto CompleteIRP;
case IRP_MN_QUERY_DEVICE_TEXT:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_BABBLE, ("PPJoyBus_PnP_Joy: IRP_MN_QUERY_DEVICE_TEXT") );
ntStatus= PPJoyBus_JoyQueryDevText (JoyDeviceData,Irp);
goto CompleteIRP;
default:
PPJOY_DBGPRINT (FILE_PNP|PPJOY_WARN,("PPJoyBus_PnP_Joy: IrpStack->MinorFunction Not handled %s (0x%x)",PnPMinorFunctionString (IrpStack->MinorFunction),IrpStack->MinorFunction) );
/* Simply copy the status of the incoming IRP to return back */
ntStatus= Irp->IoStatus.Status;
goto CompleteIRP;
}
CompleteIRP:
Irp->IoStatus.Status = ntStatus;
IoCompleteRequest (Irp, IO_NO_INCREMENT);
goto Exit;
Exit:
PPJOY_EXITPROC (FILE_PNP|PPJOY_FEXIT, "PPJoyBus_PnP_Joy",ntStatus );
return ntStatus;
}
NTSTATUS Bus_FDO_PnP(__in PDEVICE_OBJECT DeviceObject, __in PIRP Irp, __in PIO_STACK_LOCATION IrpStack, __in PFDO_DEVICE_DATA DeviceData)
{
NTSTATUS status;
ULONG length, prevcount, numPdosPresent, numPdosMissing;
PLIST_ENTRY entry, listHead, nextEntry;
PPDO_DEVICE_DATA pdoData;
PDEVICE_RELATIONS relations, oldRelations;
PAGED_CODE();
Bus_IncIoCount(DeviceData);
switch (IrpStack->MinorFunction)
{
case IRP_MN_START_DEVICE:
status = Bus_SendIrpSynchronously(DeviceData->NextLowerDriver, Irp);
if (NT_SUCCESS(status))
{
status = Bus_StartFdo (DeviceData, Irp);
}
Irp->IoStatus.Status = status;
IoCompleteRequest (Irp, IO_NO_INCREMENT);
Bus_DecIoCount(DeviceData);
return status;
case IRP_MN_QUERY_STOP_DEVICE:
SET_NEW_PNP_STATE(DeviceData, StopPending);
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
case IRP_MN_CANCEL_STOP_DEVICE:
if (StopPending == DeviceData->DevicePnPState)
{
RESTORE_PREVIOUS_PNP_STATE(DeviceData);
ASSERT(DeviceData->DevicePnPState == Started);
}
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
case IRP_MN_STOP_DEVICE:
Bus_DecIoCount(DeviceData);
KeWaitForSingleObject(&DeviceData->StopEvent, Executive, KernelMode, FALSE, NULL);
Bus_IncIoCount(DeviceData);
SET_NEW_PNP_STATE(DeviceData, Stopped);
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
case IRP_MN_QUERY_REMOVE_DEVICE:
SET_NEW_PNP_STATE(DeviceData, RemovePending);
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
case IRP_MN_CANCEL_REMOVE_DEVICE:
if (DeviceData->DevicePnPState == RemovePending)
{
RESTORE_PREVIOUS_PNP_STATE(DeviceData);
}
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
case IRP_MN_SURPRISE_REMOVAL:
SET_NEW_PNP_STATE(DeviceData, SurpriseRemovePending);
Bus_RemoveFdo(DeviceData);
ExAcquireFastMutex(&DeviceData->Mutex);
{
listHead = &DeviceData->ListOfPDOs;
for(entry = listHead->Flink,nextEntry = entry->Flink; entry != listHead; entry = nextEntry, nextEntry = entry->Flink)
{
pdoData = CONTAINING_RECORD(entry, PDO_DEVICE_DATA, Link);
RemoveEntryList(&pdoData->Link);
InitializeListHead(&pdoData->Link);
pdoData->ParentFdo = NULL;
pdoData->ReportedMissing = TRUE;
}
}
ExReleaseFastMutex(&DeviceData->Mutex);
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
case IRP_MN_REMOVE_DEVICE:
if (DeviceData->DevicePnPState != SurpriseRemovePending)
{
Bus_RemoveFdo(DeviceData);
}
SET_NEW_PNP_STATE(DeviceData, Deleted);
Bus_DecIoCount(DeviceData);
Bus_DecIoCount(DeviceData);
KeWaitForSingleObject(&DeviceData->RemoveEvent, Executive, KernelMode, FALSE, NULL);
ExAcquireFastMutex(&DeviceData->Mutex);
{
listHead = &DeviceData->ListOfPDOs;
for(entry = listHead->Flink,nextEntry = entry->Flink; entry != listHead; entry = nextEntry, nextEntry = entry->Flink)
{
pdoData = CONTAINING_RECORD(entry, PDO_DEVICE_DATA, Link);
RemoveEntryList(&pdoData->Link);
if (pdoData->DevicePnPState == SurpriseRemovePending)
{
Bus_KdPrint(("\tFound a surprise removed device: 0x%p\n", pdoData->Self));
InitializeListHead(&pdoData->Link);
pdoData->ParentFdo = NULL;
pdoData->ReportedMissing = TRUE;
continue;
}
Bus_DestroyPdo(pdoData->Self, pdoData);
}
}
ExReleaseFastMutex(&DeviceData->Mutex);
Irp->IoStatus.Status = STATUS_SUCCESS;
IoSkipCurrentIrpStackLocation(Irp);
status = IoCallDriver(DeviceData->NextLowerDriver, Irp);
IoDetachDevice(DeviceData->NextLowerDriver);
Bus_KdPrint(("\tDeleting FDO: 0x%p\n", DeviceObject));
IoDeleteDevice(DeviceObject);
return status;
case IRP_MN_QUERY_DEVICE_RELATIONS:
Bus_KdPrint(("\tQueryDeviceRelation Type: %s\n", DbgDeviceRelationString(IrpStack->Parameters.QueryDeviceRelations.Type)));
if (IrpStack->Parameters.QueryDeviceRelations.Type != BusRelations)
{
break;
}
ExAcquireFastMutex(&DeviceData->Mutex);
oldRelations = (PDEVICE_RELATIONS) Irp->IoStatus.Information;
if (oldRelations)
{
prevcount = oldRelations->Count;
if (!DeviceData->NumPDOs)
{
ExReleaseFastMutex(&DeviceData->Mutex);
break;
}
}
else
{
prevcount = 0;
}
numPdosPresent = 0;
numPdosMissing = 0;
for (entry = DeviceData->ListOfPDOs.Flink; entry != &DeviceData->ListOfPDOs; entry = entry->Flink)
{
pdoData = CONTAINING_RECORD(entry, PDO_DEVICE_DATA, Link);
if (pdoData->Present) numPdosPresent++;
}
length = sizeof(DEVICE_RELATIONS) + ((numPdosPresent + prevcount) * sizeof (PDEVICE_OBJECT)) - 1;
relations = (PDEVICE_RELATIONS) ExAllocatePoolWithTag(PagedPool, length, BUSENUM_POOL_TAG);
if (relations == NULL)
{
ExReleaseFastMutex(&DeviceData->Mutex);
Irp->IoStatus.Status = status = STATUS_INSUFFICIENT_RESOURCES;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
Bus_DecIoCount(DeviceData);
return status;
}
if (prevcount)
{
RtlCopyMemory(relations->Objects, oldRelations->Objects, prevcount * sizeof (PDEVICE_OBJECT));
}
relations->Count = prevcount + numPdosPresent;
for (entry = DeviceData->ListOfPDOs.Flink; entry != &DeviceData->ListOfPDOs; entry = entry->Flink)
{
pdoData = CONTAINING_RECORD(entry, PDO_DEVICE_DATA, Link);
if (pdoData->Present)
{
relations->Objects[prevcount] = pdoData->Self;
ObReferenceObject(pdoData->Self);
prevcount++;
}
else
{
pdoData->ReportedMissing = TRUE;
numPdosMissing++;
}
}
Bus_KdPrint(("#PDOS Present = %d, Reported = %d, Missing = %d, Listed = %d", numPdosPresent, relations->Count, numPdosMissing, DeviceData->NumPDOs));
if (oldRelations)
{
ExFreePool(oldRelations);
}
Irp->IoStatus.Information = (ULONG_PTR) relations;
ExReleaseFastMutex(&DeviceData->Mutex);
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
default:
break;
}
IoSkipCurrentIrpStackLocation(Irp);
status = IoCallDriver(DeviceData->NextLowerDriver, Irp);
Bus_DecIoCount(DeviceData);
return status;
}
