Пример #1
0
static void setup_rcrb(const int peg_enabled)
{
	/*\ RCRB setup: Egress Port \*/

	/* Set component ID of MCH (1). */
	EPBAR8(EPESD + 2) = 1;

	/* Link1: component ID 1, link valid. */
	EPBAR32(EPLE1D) = (EPBAR32(EPLE1D) & 0xff000000) | (1 << 16) | (1 << 0);
	EPBAR32(EPLE1A) = (uintptr_t)DEFAULT_DMIBAR;

	if (peg_enabled)
		/* Link2: link_valid. */
		EPBAR8(EPLE2D) |= (1 << 0); /* link valid */


	/*\ RCRB setup: DMI Port \*/

	/* Set component ID of MCH (1). */
	DMIBAR8(DMIESD + 2) = 1;

	/* Link1: target port 0, component id 2 (ICH), link valid. */
	DMIBAR32(DMILE1D) = (0 << 24) | (2 << 16) | (1 << 0);
	DMIBAR32(DMILE1A) = (uintptr_t)DEFAULT_RCBA;

	/* Link2: component ID 1 (MCH), link valid */
	DMIBAR32(DMILE2D) =
		(DMIBAR32(DMILE2D) & 0xff000000) | (1 << 16) | (1 << 0);
	DMIBAR32(DMILE2A) = (uintptr_t)DEFAULT_MCHBAR;
}
Пример #2
0
static void init_egress(void)
{
	/* VC0: TC0 only */
	EPBAR8(0x14) = 1;
	EPBAR8(0x4) = 1;

	/* VC1: ID1, TC7 */
	EPBAR32(0x20) = (EPBAR32(0x20) & ~(7 << 24)) | (1 << 24);
	EPBAR8(0x20) = 1 << 7;

	/* VC1: enable */
	EPBAR32(0x20) |= 1 << 31;

	while ((EPBAR8(0x26) & 2) != 0) ;

	printk(BIOS_DEBUG, "Done EP loop\n");
}
Пример #3
0
static void init_dmi(void)
{
	/* VC0: TC0 only */
	DMIBAR8(DMIVC0RCTL) = 1;
	DMIBAR8(0x4) = 1;

	/* VC1: ID1, TC7 */
	DMIBAR32(DMIVC1RCTL) = (DMIBAR32(DMIVC1RCTL) & ~(7 << 24)) | (1 << 24);
	DMIBAR8(DMIVC1RCTL) = 1 << 7;

	/* VC1: enable */
	DMIBAR32(DMIVC1RCTL) |= 1 << 31;

	// Hangs
	//while ((DMIBAR8(0x26) & 2) != 0) ;
	//printk(BIOS_DEBUG, "Done DMI loop\n");

	DMIBAR32(0x0028) = 0x00000001;
	DMIBAR32(0x002c) = 0x86000000;
	DMIBAR32(0x0040) = 0x08010005;
	DMIBAR32(0x0044) = 0x01010202;
	DMIBAR32(0x0050) = 0x00020001;
	DMIBAR32(0x0058) = DEFAULT_RCBA;
	DMIBAR32(0x0060) = 0x00010001;
	DMIBAR32(0x0068) = DEFAULT_EPBAR;
	DMIBAR32(0x0080) = 0x00010006;
	DMIBAR32(0x0084) = 0x00012c41;
	DMIBAR32(0x0088) = 0x00410000;
	DMIBAR32(0x00f0) = 0x00012000;
	DMIBAR32(0x00f4) = 0x33fe0037;
	DMIBAR32(0x00fc) = 0xf000f004;

	DMIBAR32(0x01b0) = 0x00400000;
	DMIBAR32(0x01b4) = 0x00008000;
	DMIBAR32(0x01b8) = 0x000018f2;
	DMIBAR32(0x01bc) = 0x00000018;
	DMIBAR32(0x01cc) = 0x00060010;
	DMIBAR32(0x01d4) = 0x00002000;
	DMIBAR32(0x0200) = 0x00400f26;
	DMIBAR32(0x0204) = 0x0001313f;
	DMIBAR32(0x0208) = 0x00007cb0;
	DMIBAR32(0x0210) = 0x00000101;
	DMIBAR32(0x0214) = 0x0007000f;
	DMIBAR32(0x0224) = 0x00030005;
	DMIBAR32(0x0230) = 0x2800000e;
	DMIBAR32(0x0234) = 0x4abcb5bc;
	DMIBAR32(0x0250) = 0x00000007;

	DMIBAR32(0x0c00) = 0x0000003c;
	DMIBAR32(0x0c04) = 0x16000000;
	DMIBAR32(0x0c0c) = 0x00001fff;
	DMIBAR32(0x0c10) = 0x0000b100;
	DMIBAR32(0x0c24) = 0xffff0038;
	DMIBAR32(0x0c28) = 0x0000000e;
	DMIBAR32(0x0c2c) = 0x003c0008;
	DMIBAR32(0x0c30) = 0x02000180;
	DMIBAR32(0x0c34) = 0x10040071;
	DMIBAR32(0x0d60) = 0x00000001;
	DMIBAR32(0x0d6c) = 0x00000300;
	DMIBAR32(0x0d74) = 0x00000020;
	DMIBAR32(0x0d78) = 0x00220000;
	DMIBAR32(0x0d7c) = 0x111f727c;
	DMIBAR32(0x0d80) = 0x00001409;
	DMIBAR32(0x0d88) = 0x000f1867;
	DMIBAR32(0x0d8c) = 0x013000fc;
	DMIBAR32(0x0da4) = 0x00009757;
	DMIBAR32(0x0da8) = 0x00000078;
	DMIBAR32(0x0e00) = 0x000d034e;
	DMIBAR32(0x0e04) = 0x01880880;
	DMIBAR32(0x0e08) = 0x01000060;
	DMIBAR32(0x0e0c) = 0x00000080;
	DMIBAR32(0x0e10) = 0xbe000000;
	DMIBAR32(0x0e18) = 0x000000e3;
	DMIBAR32(0x0e20) = 0x000d034e;
	DMIBAR32(0x0e24) = 0x01880880;
	DMIBAR32(0x0e28) = 0x01000060;
	DMIBAR32(0x0e2c) = 0x00000080;
	DMIBAR32(0x0e30) = 0xbe000000;
	DMIBAR32(0x0e38) = 0x000000e3;
	DMIBAR32(0x0e40) = 0x000d034e;
	DMIBAR32(0x0e44) = 0x01880880;
	DMIBAR32(0x0e48) = 0x01000060;
	DMIBAR32(0x0e4c) = 0x00000080;
	DMIBAR32(0x0e50) = 0xbe000000;
	DMIBAR32(0x0e58) = 0x000000e3;
	DMIBAR32(0x0e60) = 0x000d034e;
	DMIBAR32(0x0e64) = 0x01880880;
	DMIBAR32(0x0e68) = 0x01000060;
	DMIBAR32(0x0e6c) = 0x00000080;
	DMIBAR32(0x0e70) = 0xbe000000;
	DMIBAR32(0x0e78) = 0x000000e3;

	DMIBAR32(0x0e14) = 0xce00381b;
	DMIBAR32(0x0e34) = 0x4000781b;
	DMIBAR32(0x0e54) = 0x5c00781b;
	DMIBAR32(0x0e74) = 0x5400381b;

	DMIBAR32(0x0218) = 0x0b6202c1;
	DMIBAR32(0x021c) = 0x02c202c2;

	DMIBAR32(0x0334) = 0x00b904b3;
	DMIBAR32(0x0338) = 0x004e0000;

	DMIBAR32(0x0300) = 0x00a70f4c;
	DMIBAR32(0x0304) = 0x00a90f54;
	DMIBAR32(0x0308) = 0x00d103c4;
	DMIBAR32(0x030c) = 0x003c0e10;
	DMIBAR32(0x0310) = 0x003d0e11;
	DMIBAR32(0x0314) = 0x00640000;
	DMIBAR32(0x0318) = 0x00320c86;
	DMIBAR32(0x031c) = 0x003a0ca6;
	DMIBAR32(0x0324) = 0x00040010;
	DMIBAR32(0x0328) = 0x00040000;

	EPBAR32(0x40) = 0x00010005;
	EPBAR32(0x44) = 0x00010301;
	EPBAR32(0x50) = 0x01010001;
	EPBAR32(0x58) = DEFAULT_DMIBAR;
	EPBAR32(0x60) = 0x02010003;
	EPBAR32(0x68) = 0x00008000;
	EPBAR32(0x70) = 0x03000002;
	EPBAR32(0x78) = 0x00030000;
}
Пример #4
0
static void init_egress(void)
{
	/* VC0: TC0 only */
	EPBAR8(0x14) &= 1;
	EPBAR8(0x4) = (EPBAR8(0x4) & ~7) | 1;

	/* VC1: isoch */
	EPBAR32(0x28) = 0x0a0a0a0a;
	EPBAR32(0x1c) = (EPBAR32(0x1c) & ~(127 << 16)) | (0x0a << 16);

	/* VC1: ID1, TC7 */
	EPBAR32(0x20) = (EPBAR32(0x20) & ~(7 << 24)) | (1 << 24);
	EPBAR8(0x20) = (EPBAR8(0x20) & 1) | (1 << 7);

	/* VC1 ARB table: setup and enable */
	EPBAR32(0x100) = 0x55555555;
	EPBAR32(0x104) = 0x55555555;
	EPBAR32(0x108) = 0x55555555;
	EPBAR32(0x10c) = 0x55555555;
	EPBAR32(0x110) = 0x55555555;
	EPBAR32(0x114) = 0x55555555;
	EPBAR32(0x118) = 0x55555555;
	EPBAR32(0x11c) = 0x00005555;
	EPBAR32(0x20) |= 1 << 16;

	while ((EPBAR8(0x26) & 1) != 0) ;

	/* VC1: enable */
	EPBAR32(0x20) |= 1 << 31;

	while ((EPBAR8(0x26) & 2) != 0) ;
}
Пример #5
0
static void init_egress(void)
{
	u32 reg32;

	/* VC0: TC0 only */
	EPBAR8(0x14) = 1;
	EPBAR8(0x4) = 1;

	switch (MCHBAR32(0xc00) & 0x7) {
	case 0x0:
		/* FSB 1066 */
		EPBAR32(0x2c) = 0x0001a6db;
		break;
	case 0x2:
		/* FSB 800 */
		EPBAR32(0x2c) = 0x00014514;
		break;
	default:
	case 0x4:
		/* FSB 1333 */
		EPBAR32(0x2c) = 0x00022861;
		break;
	}
	EPBAR32(0x28) = 0x0a0a0a0a;
	EPBAR8(0xc) = (EPBAR8(0xc) & ~0xe) | 2;
	EPBAR32(0x1c) = (EPBAR32(0x1c) & ~0x7f0000) | 0x0a0000;
	MCHBAR8(0x3c) = MCHBAR8(0x3c) | 0x7;

	/* VC1: ID1, TC7 */
	reg32 = (EPBAR32(0x20) & ~(7 << 24)) | (1 << 24);
	reg32 = (reg32 & ~0xfe) | (1 << 7);
	EPBAR32(0x20) = reg32;

	/* Init VC1 port arbitration table */
	EPBAR32(0x100) = 0x001000001;
	EPBAR32(0x104) = 0x000040000;
	EPBAR32(0x108) = 0x000001000;
	EPBAR32(0x10c) = 0x000000040;
	EPBAR32(0x110) = 0x001000001;
	EPBAR32(0x114) = 0x000040000;
	EPBAR32(0x118) = 0x000001000;
	EPBAR32(0x11c) = 0x000000040;

	/* Load table */
	reg32 = EPBAR32(0x20) | (1 << 16);
	EPBAR32(0x20) = reg32;
	asm("nop");
	EPBAR32(0x20) = reg32;

	/* Wait for table load */
	while ((EPBAR8(0x26) & (1 << 0)) != 0);

	/* VC1: enable */
	EPBAR32(0x20) |= 1 << 31;

	/* Wait for VC1 */
	while ((EPBAR8(0x26) & (1 << 1)) != 0);

	printk(BIOS_DEBUG, "Done Egress Port\n");
}