C++ (Cpp) EXYNOS4212_GPM3 примеры использования

Пример #1

0

Показать файл

Файл: setup-fb-s5p.c Проект: dadonking/xxICSKernel

int s3cfb_lcd_on(struct platform_device *pdev)
{
	int err;

#ifdef CONFIG_MACH_SMDKC210
	err = gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
	if (err) {
		printk(KERN_ERR "failed to request GPX0 for "
			"lcd reset control\n");
		return err;
	}

	gpio_set_value(EXYNOS4_GPX0(6), 0);
	mdelay(1);

	gpio_set_value(EXYNOS4_GPX0(6), 1);

	gpio_free(EXYNOS4_GPX0(6));
#elif defined(CONFIG_MACH_SMDK4X12)
	if (samsung_board_rev_is_0_1()) {
		err = gpio_request_one(EXYNOS4212_GPM3(6),
				GPIOF_OUT_INIT_HIGH, "GPM3");
		if (err) {
			printk(KERN_ERR "failed to request GPM3 for "
				"lcd reset control\n");
			return err;
		}

		gpio_set_value(EXYNOS4212_GPM3(6), 0);
		mdelay(1);

		gpio_set_value(EXYNOS4212_GPM3(6), 1);

		gpio_free(EXYNOS4212_GPM3(6));

	} else {
		err = gpio_request_one(EXYNOS4_GPX1(5),
				GPIOF_OUT_INIT_HIGH, "GPX0");
		if (err) {
			printk(KERN_ERR "failed to request GPX0 for "
				"lcd reset control\n");
			return err;
		}

		gpio_set_value(EXYNOS4_GPX1(5), 0);
		mdelay(1);

		gpio_set_value(EXYNOS4_GPX1(5), 1);

		gpio_free(EXYNOS4_GPX1(5));
	}
#endif

	return 0;
}

Пример #2

0

Показать файл

Файл: setup-fb-s5p.c Проект: Goodzila/m040

int s3cfb_lcd_on(struct platform_device *pdev)
{
	int err;

	if (machine_is_smdkc210()) {
		err = gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
		if (err) {
			printk(KERN_ERR "failed to request GPX0 for "
				"lcd reset control\n");
			return err;
		}

		gpio_set_value(EXYNOS4_GPX0(6), 0);
		mdelay(1);

		gpio_set_value(EXYNOS4_GPX0(6), 1);

		gpio_free(EXYNOS4_GPX0(6));
	} else if (machine_is_smdk4412()) {
		if (samsung_board_rev_is_0_1()) {
			err = gpio_request_one(EXYNOS4212_GPM3(6),
					GPIOF_OUT_INIT_HIGH, "GPM3");
			if (err) {
				printk(KERN_ERR "failed to request GPM3 for "
					"lcd reset control\n");
				return err;
			}

			gpio_set_value(EXYNOS4212_GPM3(6), 0);
			mdelay(1);

			gpio_set_value(EXYNOS4212_GPM3(6), 1);

			gpio_free(EXYNOS4212_GPM3(6));

		} else {
			err = gpio_request_one(EXYNOS4_GPX1(5),
					GPIOF_OUT_INIT_HIGH, "GPX0");
			if (err) {
				printk(KERN_ERR "failed to request GPX0 for "
					"lcd reset control\n");
				return err;
			}

			gpio_set_value(EXYNOS4_GPX1(5), 0);
			mdelay(1);

			gpio_set_value(EXYNOS4_GPX1(5), 1);

			gpio_free(EXYNOS4_GPX1(5));
		}
	}

	return 0;
}

Пример #3

0

Показать файл

Файл: setup-fimc-is.c Проект: Ante0/xxICSKernel

void exynos_fimc_is_cfg_gpio(struct platform_device *pdev)
{
	int ret;
	/* 1. UART setting for FIMC-IS */
	/* GPM3[5] : TXD_UART_ISP */
	ret = gpio_request(EXYNOS4212_GPM3(5), "GPM3");
	if (ret)
		printk(KERN_ERR "#### failed to request GPM3_5 ####\n");
	s3c_gpio_cfgpin(EXYNOS4212_GPM3(5), (0x3<<20));
	s3c_gpio_setpull(EXYNOS4212_GPM3(5), S3C_GPIO_PULL_NONE);
	gpio_free(EXYNOS4212_GPM3(5));

	/* GPM3[7] : RXD_UART_ISP */
	ret = gpio_request(EXYNOS4212_GPM3(7), "GPM3");
	if (ret)
		printk(KERN_ERR "#### failed to request GPM3_7 ####\n");
	s3c_gpio_cfgpin(EXYNOS4212_GPM3(7), (0x3<<28));
	s3c_gpio_setpull(EXYNOS4212_GPM3(7), S3C_GPIO_PULL_NONE);
	gpio_free(EXYNOS4212_GPM3(7));

	/* 2. GPIO setting for FIMC-IS */
	ret = gpio_request(EXYNOS4212_GPM4(0), "GPM4");
	if (ret)
		printk(KERN_ERR "#### failed to request GPM4_0 ####\n");
	s3c_gpio_cfgpin(EXYNOS4212_GPM4(0), (0x2<<0));
	s3c_gpio_setpull(EXYNOS4212_GPM4(0), S3C_GPIO_PULL_NONE);
	gpio_free(EXYNOS4212_GPM4(0));

	ret = gpio_request(EXYNOS4212_GPM4(1), "GPM4");
	if (ret)
		printk(KERN_ERR "#### failed to request GPM4_1 ####\n");
	s3c_gpio_cfgpin(EXYNOS4212_GPM4(1), (0x2<<4));
	s3c_gpio_setpull(EXYNOS4212_GPM4(1), S3C_GPIO_PULL_NONE);
	gpio_free(EXYNOS4212_GPM4(1));

	ret = gpio_request(EXYNOS4212_GPM4(2), "GPM4");
	if (ret)
		printk(KERN_ERR "#### failed to request GPM4_2 ####\n");
	s3c_gpio_cfgpin(EXYNOS4212_GPM4(2), (0x2<<8));
	s3c_gpio_setpull(EXYNOS4212_GPM4(2), S3C_GPIO_PULL_NONE);
	gpio_free(EXYNOS4212_GPM4(2));

	ret = gpio_request(EXYNOS4212_GPM4(3), "GPM4");
	if (ret)
		printk(KERN_ERR "#### failed to request GPM4_3 ####\n");
	s3c_gpio_cfgpin(EXYNOS4212_GPM4(3), (0x2<<12));
	s3c_gpio_setpull(EXYNOS4212_GPM4(3), S3C_GPIO_PULL_NONE);
	gpio_free(EXYNOS4212_GPM4(3));
}

Пример #4

0

Показать файл

Файл: tab3-power.c Проект: Andro-Boy/Googy-Max2-Kernel

	.buck3_voltage[6] = 1100000,	/* 1.1V */
	.buck3_voltage[7] = 1100000,	/* 1.1V */

	.buck4_voltage[0] = 1100000,	/* 1.1V */
	.buck4_voltage[1] = 1100000,	/* 1.1V */
	.buck4_voltage[2] = 1100000,	/* 1.1V */
	.buck4_voltage[3] = 1100000,	/* 1.1V */
	.buck4_voltage[4] = 1100000,	/* 1.1V */
	.buck4_voltage[5] = 1100000,	/* 1.1V */
	.buck4_voltage[6] = 1100000,	/* 1.1V */
	.buck4_voltage[7] = 1100000,	/* 1.1V */

	.buck_ramp_delay = 25,
	.buck_default_idx = 1,

	.buck_gpios[0]		= EXYNOS4212_GPM3(0),
	.buck_gpios[1]		= EXYNOS4212_GPM3(1),
	.buck_gpios[2]		= EXYNOS4212_GPM3(2),

	.buck_ds[0]		= EXYNOS4_GPF3(1),
	.buck_ds[1]		= EXYNOS4_GPF3(2),
	.buck_ds[2]		= EXYNOS4_GPF3(3),

	.buck1_init		= 1000000,
	.buck2_init		= 1100000,
	.buck3_init		= 1000000,
	.buck4_init		= 1000000,

};

void midas_power_init(void)

Пример #5

0

Показать файл

Файл: board-grande-gpio.c Проект: Entropy512/I9300_N8013_Changes

 {   EXYNOS4_GPK3(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
     S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1
 }, /* WLAN_SDIO_CMD */
 {   EXYNOS4_GPK3(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
     S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1
 }, /* WLAN_SDIO_D(0) */
 {   EXYNOS4_GPK3(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
     S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1
 }, /* WLAN_SDIO_D(1) */
 {   EXYNOS4_GPK3(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
     S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1
 }, /* WLAN_SDIO_D(2) */
 {   EXYNOS4_GPK3(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
     S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1
 }, /* WLAN_SDIO_D(3) */
 {   EXYNOS4212_GPM3(0), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_ZERO,
     S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1
 }, /* PMIC_DVS1 */
 {   EXYNOS4212_GPM4(4), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_NONE,
     S3C_GPIO_PULL_UP, S5P_GPIO_DRVSTR_LV3
 }, /* MSENSE_RST_N */
 {   EXYNOS4_GPY0(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
     S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1
 }, /* NC */
 {   EXYNOS4_GPY0(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
     S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1
 }, /* NC */
 {   EXYNOS4_GPY0(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
     S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1
 }, /* NC */
 {   EXYNOS4_GPY0(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,

Пример #6

0

Показать файл

Файл: gpio-exynos4.c Проект: Hackhao/tzos

		},
	}, {
		.base	= (S5P_VA_GPIO2 + 0x2A0),
		.eint_offset = 0x2C,
		.group	= 25,
		.chip	= {
			.base	= EXYNOS4212_GPM2(0),
			.ngpio	= EXYNOS4212_GPIO_M2_NR,
			.label	= "GPM2",
		},
	}, {
		.base	= (S5P_VA_GPIO2 + 0x2C0),
		.eint_offset = 0x30,
		.group	= 26,
		.chip	= {
			.base	= EXYNOS4212_GPM3(0),
			.ngpio	= EXYNOS4212_GPIO_M3_NR,
			.label	= "GPM3",
		},
	}, {
		.base	= (S5P_VA_GPIO2 + 0x2E0),
		.eint_offset = 0x34,
		.group	= 27,
		.chip	= {
			.base	= EXYNOS4212_GPM4(0),
			.ngpio	= EXYNOS4212_GPIO_M4_NR,
			.label	= "GPM4",
		},
	}, {
		.base   = S5P_VA_GPIO4,
		.eint_offset = 0x00,

Пример #7

0

Показать файл

Файл: tab3-gpio.c Проект: pileiba/s4zoomkernel

	{EXYNOS4_GPK3(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_CMD */
	{EXYNOS4_GPK3(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(0) */
	{EXYNOS4_GPK3(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(1) */
	{EXYNOS4_GPK3(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(2) */
	{EXYNOS4_GPK3(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(3) */

#if !defined(CONFIG_SEC_MODEM) && !defined(CONFIG_QC_MODEM)
	{EXYNOS4212_GPM0(7), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
#endif
	{EXYNOS4212_GPM3(0), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_ZERO,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PMIC_DVS1 */

	{EXYNOS4_GPY0(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* IRDA_SDA */
	{EXYNOS4_GPY0(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* IRDA_SCL */
#if defined(CONFIG_TARGET_TAB3_WIFI8) || defined(CONFIG_TARGET_TAB3_3G8) || \
		defined(CONFIG_TARGET_TAB3_LTE8)
	{EXYNOS4_GPY0(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY0(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
#endif
	{EXYNOS4_GPY1(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */

Пример #8

0

Показать файл

Файл: m3-gpio.c Проект: Entropy512/I9300_N8013_Changes

	{EXYNOS4212_GPM1(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM1(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM1(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPM1(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPM1(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPM1(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPM1(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},

	{EXYNOS4212_GPM2(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPM2(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPM2(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4212_GPM2(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4212_GPM2(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},

	{EXYNOS4212_GPM3(0), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPM3(1), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPM3(2), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4212_GPM3(3), S3C_GPIO_SLP_OUT1,  S3C_GPIO_PULL_DOWN},
	{EXYNOS4212_GPM3(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM3(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM3(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM3(7), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

	{EXYNOS4212_GPM4(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM4(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM4(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4212_GPM4(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4212_GPM4(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM4(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4212_GPM4(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

Пример #9

0

Показать файл

Файл: p4note-gpio.c Проект: 123good/ninphetamine3

	{EXYNOS4_GPK3(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_CMD */
	{EXYNOS4_GPK3(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(0) */
	{EXYNOS4_GPK3(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(1) */
	{EXYNOS4_GPK3(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(2) */
	{EXYNOS4_GPK3(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(3) */

#if !defined(CONFIG_SEC_MODEM)
	{EXYNOS4212_GPM0(7), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
#endif
	{EXYNOS4212_GPM3(0), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_ZERO,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PMIC_DVS1 */

	{EXYNOS4_GPY0(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY0(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY1(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY1(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY1(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY1(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY2(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,

Пример #10

0

Показать файл

Файл: baffin-gpio.c Проект: HAXTC/android_kernel_samsung_n7000

	{EXYNOS4_GPK3(0), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_ZERO,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_CLK */
	{EXYNOS4_GPK3(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_CMD */
	{EXYNOS4_GPK3(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPK3(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(0) */
	{EXYNOS4_GPK3(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(1) */
	{EXYNOS4_GPK3(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(2) */
	{EXYNOS4_GPK3(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* WLAN_SDIO_D(3) */

	{EXYNOS4212_GPM3(0), S3C_GPIO_OUTPUT, S3C_GPIO_SETPIN_ZERO,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PMIC_DVS1 */
	{EXYNOS4_GPY0(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY0(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY0(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY0(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY0(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY0(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPY1(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */