void Werkstuck::LY(float endPunkt, float Rwz, float Lwz, float Rwz2) // прямое фрезерование по оси Х
// endPunkt - конечная точка
{
if (Zwz<H0) {
gp_Pnt punkt1(Xwz-Rwz,Ywz,Zwz);
gp_Pnt punkt2(Xwz+Rwz,Ywz,Zwz);
gp_Pnt punkt3(Xwz+Rwz,endPunkt,Zwz);
gp_Pnt punkt4(Xwz,endPunkt,Zwz);
if (endPunkt>=Ywz) punkt4.SetY(endPunkt+Rwz);
else punkt4.SetY(endPunkt-Rwz);
gp_Pnt punkt5(Xwz-Rwz,endPunkt,Zwz);
Handle(Geom_TrimmedCurve) aSeg1 = GC_MakeSegment(punkt1 , punkt2);
Handle(Geom_TrimmedCurve) aSeg2 = GC_MakeSegment(punkt2 , punkt3);
Handle(Geom_TrimmedCurve) aSeg3 = GC_MakeArcOfCircle(punkt3,punkt4 ,punkt5);
Handle(Geom_TrimmedCurve) aSeg4 = GC_MakeSegment(punkt5 , punkt1);
TopoDS_Edge aEdge1 = BRepBuilderAPI_MakeEdge(aSeg1);
TopoDS_Edge aEdge2 = BRepBuilderAPI_MakeEdge(aSeg2);
TopoDS_Edge aEdge3 = BRepBuilderAPI_MakeEdge(aSeg3);
TopoDS_Edge aEdge4 = BRepBuilderAPI_MakeEdge(aSeg4);
TopoDS_Wire Basis = BRepBuilderAPI_MakeWire(aEdge1 , aEdge2 , aEdge3, aEdge4);
TopoDS_Face FlacheBasis = BRepBuilderAPI_MakeFace(Basis);
if (firstRun) {
fBasis = FlacheBasis;
firstRun = false;
} else {
fBasis = BRepAlgo_Fuse(fBasis, FlacheBasis);
gp_Vec PrismVec(0 , 0 , Lwz);
TopoDS_Shape sLY = BRepPrimAPI_MakePrism(fBasis , PrismVec);
if (Rwz2>0) {
BRepFilletAPI_MakeFillet mkFillet(sLY);
TopExp_Explorer aEdgeExplorer(sLY , TopAbs_EDGE);
while(aEdgeExplorer.More()) {
TopoDS_Edge aEdge = TopoDS::Edge(aEdgeExplorer.Current());
mkFillet.Add(Rwz2 , aEdge);
aEdgeExplorer.Next();
}
sLY = mkFillet.Shape();
}
WS = BRepAlgo_Cut(WS,sLY);
firstRun = true;
}
/*gp_Vec PrismVec(0 , 0 , Lwz);
TopoDS_Shape sLY = BRepPrimAPI_MakePrism(FlacheBasis , PrismVec);
if (Rwz2>0) {
BRepFilletAPI_MakeFillet mkFillet(sLY);
TopExp_Explorer aEdgeExplorer(sLY , TopAbs_EDGE);
while(aEdgeExplorer.More()){
TopoDS_Edge aEdge = TopoDS::Edge(aEdgeExplorer.Current());
mkFillet.Add(Rwz2 , aEdge);
aEdgeExplorer.Next();
}
sLY = mkFillet.Shape();
}
WS = BRepAlgo_Cut(WS,sLY);*/
}
Ywz=endPunkt;
}
TopoDS_Shape MakeBottle(const Standard_Real myWidth, const Standard_Real myHeight, const Standard_Real myThickness)
{
// Profile : Define Support Points
gp_Pnt aPnt1(-myWidth / 2., 0, 0);
gp_Pnt aPnt2(-myWidth / 2., -myThickness / 4., 0);
gp_Pnt aPnt3(0, -myThickness / 2., 0);
gp_Pnt aPnt4(myWidth / 2., -myThickness / 4., 0);
gp_Pnt aPnt5(myWidth / 2., 0, 0);
// Profile : Define the Geometry
Handle(Geom_TrimmedCurve) anArcOfCircle = GC_MakeArcOfCircle(aPnt2,aPnt3,aPnt4);
Handle(Geom_TrimmedCurve) aSegment1 = GC_MakeSegment(aPnt1, aPnt2);
Handle(Geom_TrimmedCurve) aSegment2 = GC_MakeSegment(aPnt4, aPnt5);
// Profile : Define the Topology
TopoDS_Edge anEdge1 = BRepBuilderAPI_MakeEdge(aSegment1);
TopoDS_Edge anEdge2 = BRepBuilderAPI_MakeEdge(anArcOfCircle);
TopoDS_Edge anEdge3 = BRepBuilderAPI_MakeEdge(aSegment2);
TopoDS_Wire aWire = BRepBuilderAPI_MakeWire(anEdge1, anEdge2, anEdge3);
// Complete Profile
gp_Ax1 xAxis = gp::OX();
gp_Trsf aTrsf;
aTrsf.SetMirror(xAxis);
BRepBuilderAPI_Transform aBRepTrsf(aWire, aTrsf);
TopoDS_Shape aMirroredShape = aBRepTrsf.Shape();
TopoDS_Wire aMirroredWire = TopoDS::Wire(aMirroredShape);
BRepBuilderAPI_MakeWire mkWire;
mkWire.Add(aWire);
mkWire.Add(aMirroredWire);
TopoDS_Wire myWireProfile = mkWire.Wire();
// Body : Prism the Profile
TopoDS_Face myFaceProfile = BRepBuilderAPI_MakeFace(myWireProfile);
gp_Vec aPrismVec(0, 0, myHeight);
TopoDS_Shape myBody = BRepPrimAPI_MakePrism(myFaceProfile, aPrismVec);
// Body : Apply Fillets
BRepFilletAPI_MakeFillet mkFillet(myBody);
TopExp_Explorer anEdgeExplorer(myBody, TopAbs_EDGE);
while(anEdgeExplorer.More()) {
TopoDS_Edge anEdge = TopoDS::Edge(anEdgeExplorer.Current());
//Add edge to fillet algorithm
mkFillet.Add(myThickness / 12., anEdge);
anEdgeExplorer.Next();
}
myBody = mkFillet.Shape();
// Body : Add the Neck
gp_Pnt neckLocation(0, 0, myHeight);
gp_Dir neckAxis = gp::DZ();
gp_Ax2 neckAx2(neckLocation, neckAxis);
Standard_Real myNeckRadius = myThickness / 4.;
Standard_Real myNeckHeight = myHeight / 10.;
BRepPrimAPI_MakeCylinder MKCylinder(neckAx2, myNeckRadius, myNeckHeight);
TopoDS_Shape myNeck = MKCylinder.Shape();
myBody = BRepAlgoAPI_Fuse(myBody, myNeck);
// Body : Create a Hollowed Solid
TopoDS_Face faceToRemove;
Standard_Real zMax = -1;
for(TopExp_Explorer aFaceExplorer(myBody, TopAbs_FACE); aFaceExplorer.More(); aFaceExplorer.Next()) {
TopoDS_Face aFace = TopoDS::Face(aFaceExplorer.Current());
// Check if <aFace> is the top face of the bottle�s neck
Handle(Geom_Surface) aSurface = BRep_Tool::Surface(aFace);
if(aSurface->DynamicType() == STANDARD_TYPE(Geom_Plane)) {
Handle(Geom_Plane) aPlane = Handle(Geom_Plane)::DownCast(aSurface);
gp_Pnt aPnt = aPlane->Location();
Standard_Real aZ = aPnt.Z();
if(aZ > zMax) {
zMax = aZ;
faceToRemove = aFace;
}
}
}
TopTools_ListOfShape facesToRemove;
facesToRemove.Append(faceToRemove);
myBody = BRepOffsetAPI_MakeThickSolid(myBody, facesToRemove, -myThickness / 50, 1.e-3);
// Threading : Create Surfaces
Handle(Geom_CylindricalSurface) aCyl1 = new Geom_CylindricalSurface(neckAx2, myNeckRadius * 0.99);
Handle(Geom_CylindricalSurface) aCyl2 = new Geom_CylindricalSurface(neckAx2, myNeckRadius * 1.05);
// Threading : Define 2D Curves
gp_Pnt2d aPnt(2. * M_PI, myNeckHeight / 2.);
gp_Dir2d aDir(2. * M_PI, myNeckHeight / 4.);
gp_Ax2d anAx2d(aPnt, aDir);
Standard_Real aMajor = 2. * M_PI;
Standard_Real aMinor = myNeckHeight / 10;
Handle(Geom2d_Ellipse) anEllipse1 = new Geom2d_Ellipse(anAx2d, aMajor, aMinor);
Handle(Geom2d_Ellipse) anEllipse2 = new Geom2d_Ellipse(anAx2d, aMajor, aMinor / 4);
Handle(Geom2d_TrimmedCurve) anArc1 = new Geom2d_TrimmedCurve(anEllipse1, 0, M_PI);
Handle(Geom2d_TrimmedCurve) anArc2 = new Geom2d_TrimmedCurve(anEllipse2, 0, M_PI);
gp_Pnt2d anEllipsePnt1 = anEllipse1->Value(0);
gp_Pnt2d anEllipsePnt2 = anEllipse1->Value(M_PI);
Handle(Geom2d_TrimmedCurve) aSegment = GCE2d_MakeSegment(anEllipsePnt1, anEllipsePnt2);
// Threading : Build Edges and Wires
TopoDS_Edge anEdge1OnSurf1 = BRepBuilderAPI_MakeEdge(anArc1, aCyl1);
TopoDS_Edge anEdge2OnSurf1 = BRepBuilderAPI_MakeEdge(aSegment, aCyl1);
TopoDS_Edge anEdge1OnSurf2 = BRepBuilderAPI_MakeEdge(anArc2, aCyl2);
TopoDS_Edge anEdge2OnSurf2 = BRepBuilderAPI_MakeEdge(aSegment, aCyl2);
TopoDS_Wire threadingWire1 = BRepBuilderAPI_MakeWire(anEdge1OnSurf1, anEdge2OnSurf1);
TopoDS_Wire threadingWire2 = BRepBuilderAPI_MakeWire(anEdge1OnSurf2, anEdge2OnSurf2);
BRepLib::BuildCurves3d(threadingWire1);
BRepLib::BuildCurves3d(threadingWire2);
// Create Threading
BRepOffsetAPI_ThruSections aTool(Standard_True);
aTool.AddWire(threadingWire1);
aTool.AddWire(threadingWire2);
aTool.CheckCompatibility(Standard_False);
TopoDS_Shape myThreading = aTool.Shape();
// Building the Resulting Compound
TopoDS_Compound aRes;
BRep_Builder aBuilder;
aBuilder.MakeCompound (aRes);
aBuilder.Add (aRes, myBody);
aBuilder.Add (aRes, myThreading);
return aRes;
}