Пример #1
0
static void gsm_thread_entry(void* parameter)  
{
    rt_size_t  res=RT_ERROR;
    u8  linkNum=0;	
        //     finsh_init(&shell->parser);
	rt_kprintf("\r\n ---> gsm thread start !\r\n");
	 //	  	 
	 
	while (1)
	{
	
            // 1.  after power  on    get imsi code  	 	
              IMSIcode_Get(); 
            //  2. after get imsi   Comm   AT  initial   start 
              GSM_Module_TotalInitial();  
            // 3. Receivce & Process   Communication  Module   data ----
	       GSM_Buffer_Read_Process(); 
	           
             if(!SMS_send_stateQuery())
             	{
		       DataLink_Process();		
	             //------------------------------------------------
			    if (Send_DataFlag== 1) 
	               {
				   //  rt_kprintf("\r\n  gsm rx  app msgQue:   rxlen=%d  rx_content=%s\r\n",msgq_gsm.len,msgq_gsm.info); 	 
	                        //  Data_Send(GPRS_info,GPRS_infoWr_Tx); 
				   res=rt_device_control(&Device_GSM, query_online, NULL);
				    if(res==RT_EOK)
				     { 
				          linkNum=gsm_rx_app_infoStruct.link_num;  // IC  link  ==1  
				          rt_device_write(&Device_GSM, linkNum,( const void *)GPRS_info,(rt_size_t) GPRS_infoWr_Tx); 
				    }		  
				    Send_DataFlag=0;          
		
		         }    
			//---------  Step timer
			  Dial_step_Single_10ms_timer();    
			  	  //   TTS	
	                TTS_Data_Play(); 
			 
	                //   Get  CSQ value
		        // GSM_CSQ_Query();	 			  //   SMS Send
             	}
		else
			SMS_send_process();     //  相关短信处理
		 
                //   Get  CSQ value
	         GSM_CSQ_Query();	 
              
			  //	  Voice Record
			   VOC_REC_process();

			
	         rt_thread_delay(20);  	     
			   
	}
}
Пример #2
0
static void gsm_thread_entry(void* parameter)  
{
    u8 atd_str[25];
    rt_size_t  res=RT_ERROR;
        //     finsh_init(&shell->parser);
	 //	  	 
		//	step 1:  Init Dataflash
	   DF_init();  
	   APP_IOpinInit();	
	   rt_kprintf("\r\n ---> gsm thread start !\r\n");	    
	   HardWareVerion=HardWareGet(); 
	   
	   //  step 2:	 process config data   
		 SysConfiguration();	// system config				
		 
		 total_ergotic();
	     Gsm_RegisterInit();	 //  init register states	 ,then	it	will  power on	the module	 
          
		 SIMID_Convert_SIMCODE(); //   translate		   
      #ifdef HMI
		   HMI_app_init();	
      #endif           
	       gps_init();	  
	   
	 //--------------------------------------  
	while (1)
	{
	     
		 if(GSM_Working_State())
		 {
	            // 1.  after power  on    get imsi code  	 	
	              IMSIcode_Get(); 
	            //  2. after get imsi   Comm   AT  initial   start 
	              GSM_Module_TotalInitial();  
	            // 3. Receivce & Process   Communication  Module   data ----
		       GSM_Buffer_Read_Process(); 
		 }
		   rt_thread_delay(20);    
		   
		if(GSM_Working_State()==2)	
		 {
		    
	       DataLink_Process();		
             //------------------------------------------------
		    if (Send_DataFlag== 1) 
               {
			   res=rt_device_control(&Device_GSM, query_online, NULL);
			    if(res==RT_EOK)
			             rt_device_write(&Device_GSM, LinkNum,( const void *)GPRS_info,(rt_size_t) GPRS_infoWr_Tx); 
			    Send_DataFlag=0;          
	
	         }    
					//监听
			if(CallState==CallState_rdytoDialLis)
			{
             CallState=CallState_Dialing;
			 memset(atd_str,0,sizeof(atd_str));
			 memcpy(atd_str,"ATD",3);
			 memcpy(atd_str+3,JT808Conf_struct.LISTEN_Num,strlen((const char*)JT808Conf_struct.LISTEN_Num));
			 memcpy(atd_str+3+strlen((const char*)JT808Conf_struct.LISTEN_Num),";\r\n",3);
			 rt_hw_gsm_output(atd_str);
			 rt_kprintf("\r\n拨打%s\r\n",atd_str);
			}
		     //---------  Step timer
		     //  Dial_step_Single_10ms_timer();    
		  	 //   TTS	
             TTS_Data_Play();		 
             //   Get  CSQ value
	         if(GSM_CSQ_Query()==false)	 
	         {
	             if(Calling_ATA_flag==1)
	             	{
                        rt_thread_delay(3);  
		                rt_hw_gsm_output("ATA\r\n");    //检查信号强度
					    if(DispContent)	
					        rt_kprintf(" 接听   ATA\r\n");   

                       Calling_ATA_flag=0;
	             	}
			 }  
			 
			 //   SMS  Service
			 SMS_Process();            
	         rt_thread_delay(10);      	      
			   
	}
  }
} 
Пример #3
0
static void gsm_thread_entry(void* parameter)  
{
    u8 atd_str[25];
    rt_size_t  res=RT_ERROR;
        //     finsh_init(&shell->parser);
	 //	  	 
		//	step 1:  Init Dataflash
	   DF_init();  
	   APP_IOpinInit();	
	   rt_kprintf("\r\n ---> gsm thread start !\r\n");	    
	   HardWareVerion=HardWareGet(); 
	   
	   //  step 2:	 process config data   
		 SysConfiguration();	// system config				
		 
		 total_ergotic();
	   Gsm_RegisterInit();	 //  init register states	 ,then	it	will  power on	the module	 
          
		 SIMID_Convert_SIMCODE(); //   translate		   
      #ifdef HMI
		   HMI_app_init();	
      #endif           
       gps_init();
  	   Lcd_init();
	  
	   
	 //--------------------------------------  
	while (1)
	{
	 if((GSM_PWR.result==result_success)&&(dwlcd_contr<=5))
	   	{
			if(Login_Menu_Flag!=1)
			{
			
				Lcd_write(Big_lcd.status,LCD_PAGE,0x15);
				dwlcd_contr++;
			}
			else
			{
				Lcd_write(Big_lcd.status,LCD_PAGE,0x01);
				dwlcd_contr++;
			}
			;
	   	}
            // 1.  after power  on    get imsi code  	 	
              IMSIcode_Get(); 
            //  2. after get imsi   Comm   AT  initial   start 
              GSM_Module_TotalInitial();  
            // 3. Receivce & Process   Communication  Module   data ----
	       GSM_Buffer_Read_Process(); 
		   rt_thread_delay(20);      	
	       DataLink_Process();	
		   //++++++++++++++++++++++++DWLCD+++++++++++++++++++++
	       //_485_RxHandler_01();
	       if(Big_lcd.RX_enable==LCD_BUSY)
	       	{
		   	Lcd_Data_Process();
			Big_lcd.RX_enable=LCD_IDLE;
	       	}
		   /*
		   Lcd_write(Big_lcd.status,LCD_SETSPD,0);
			Lcd_write(Big_lcd.status,LCD_GPSNUM,Satelite_num);
		   Lcd_write(Big_lcd.status,LCD_GSMNUM,ModuleSQ);
		   */
		   if(ModuleStatus&Status_GPS )
		   	{
		   	if(Big_lcd.RX_enable==LCD_IDLE)
		   	{
		   	    if(lcd_contrl==0)
		   	    {
		   		Lcd_write(Big_lcd.status,LCD_SETTIME,0);
				delay_ms(5);
				lcd_contrl++;
				
		   	    }
		   		}
		   	}
		   //++++++++++++++++++++++++DWLCD+++++++++++++++++++++
		   if(BD1_struct.Rx_enable==RT_EOK)
		   	{
		   		BD1_RxProcess();
		   	}
             //------------------------------------------------
		    if (Send_DataFlag== 1) 
               {
			   res=rt_device_control(&Device_GSM, query_online, NULL);
			    if(res==RT_EOK)
			             rt_device_write(&Device_GSM, LinkNum,( const void *)GPRS_info,(rt_size_t) GPRS_infoWr_Tx); 
			    Send_DataFlag=0;          
	
	         }    
			//监听
			if(CallState==CallState_rdytoDialLis)
			{
             CallState=CallState_Dialing;
			 memset(atd_str,0,sizeof(atd_str));
			 memcpy(atd_str,"ATD",3);
			 memcpy(atd_str+3,JT808Conf_struct.LISTEN_Num,strlen((const char*)JT808Conf_struct.LISTEN_Num));
			 memcpy(atd_str+3+strlen((const char*)JT808Conf_struct.LISTEN_Num),";\r\n",3);
			 rt_hw_gsm_output(atd_str);
			 rt_kprintf("\r\n拨打%s\r\n",atd_str);
			}
		     //---------  Step timer
		     //  Dial_step_Single_10ms_timer();    
		  	 //   TTS	
             TTS_Data_Play();		 
             //   Get  CSQ value
	         if(GSM_CSQ_Query()==false)	 
	         {
	             if(Calling_ATA_flag==1)
	             	{
                        delay_ms(10);  
		                rt_hw_gsm_output("ATA\r\n");    //检查信号强度
					    if(DispContent)	
					        rt_kprintf(" 接听   ATA\r\n");   

                       Calling_ATA_flag=0;
	             	}
			 } 
			 
			 //   SMS  Service
			 SMS_Process();            
			   
	}
}