int PCB_EDIT_FRAME::OnHotkeyCopyItem()
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return 0;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return 0;
SetCurItem( item );
int eventId = 0;
switch( item->Type() )
{
case PCB_TEXT_T:
eventId = ID_POPUP_PCB_COPY_TEXTEPCB;
break;
default:
eventId = 0;
break;
}
return eventId;
}
bool PCB_EDIT_FRAME::OnHotkeyPlaceItem( wxDC* aDC )
{
BOARD_ITEM* item = GetCurItem();
bool no_tool = GetToolId() == ID_NO_TOOL_SELECTED;
bool itemCurrentlyEdited = item && item->GetFlags();
m_canvas->SetAutoPanRequest( false );
if( itemCurrentlyEdited )
{
m_canvas->SetIgnoreMouseEvents( true );
m_canvas->CrossHairOff( aDC );
switch( item->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( item->IsDragging() )
PlaceDraggedOrMovedTrackSegment( static_cast<TRACK*>( item ), aDC );
break;
case PCB_TEXT_T:
Place_Texte_Pcb( static_cast<TEXTE_PCB*>( item ), aDC );
break;
case PCB_MODULE_TEXT_T:
PlaceTexteModule( static_cast<TEXTE_MODULE*>( item ), aDC );
break;
case PCB_PAD_T:
PlacePad( static_cast<D_PAD*>( item ), aDC );
break;
case PCB_MODULE_T:
PlaceModule( static_cast<MODULE*>( item ), aDC );
break;
case PCB_TARGET_T:
PlaceTarget( static_cast<PCB_TARGET*>( item ), aDC );
break;
case PCB_LINE_T:
if( no_tool ) // when no tools: existing item moving.
Place_DrawItem( static_cast<DRAWSEGMENT*>( item ), aDC );
break;
default:
break;
}
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->CrossHairOn( aDC );
return true;
}
return false;
}
bool FOOTPRINT_EDIT_FRAME::OnHotkeyEditItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
bool blockActive = GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE;
if( itemCurrentlyEdited || blockActive )
return false;
item = ModeditLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; // Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case PCB_MODULE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE_PRMS;
break;
case PCB_PAD_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_PAD;
break;
case PCB_MODULE_TEXT_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTMODULE;
break;
case PCB_MODULE_EDGE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_MODEDIT_EDIT_BODY_ITEM;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
BOOL CMWrongQuestion::isWrong()
{
TQuestionItem item;
if(GetCurItem(item))
return item.isWrong;
else
return FALSE;
}
TRACK * PCB_EDIT_FRAME::OnHotkeyBeginRoute( wxDC* aDC )
{
if( !IsCopperLayer( GetActiveLayer() ) )
return NULL;
bool itemCurrentlyEdited = GetCurItem() && GetCurItem()->GetFlags();
// Ensure the track tool is active
if( GetToolId() != ID_TRACK_BUTT && !itemCurrentlyEdited )
{
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
cmd.SetId( ID_TRACK_BUTT );
GetEventHandler()->ProcessEvent( cmd );
}
if( GetToolId() != ID_TRACK_BUTT )
return NULL;
TRACK* track = NULL;
if( !itemCurrentlyEdited ) // no track in progress:
{
track = Begin_Route( NULL, aDC );
SetCurItem( track );
if( track )
m_canvas->SetAutoPanRequest( true );
}
else if( GetCurItem()->IsNew() )
{
track = Begin_Route( (TRACK*) GetCurItem(), aDC );
// SetCurItem() must not write to the msg panel
// because a track info is displayed while moving the mouse cursor
if( track ) // A new segment was created
SetCurItem( track, false );
m_canvas->SetAutoPanRequest( true );
}
return track;
}
bool PCB_EDIT_FRAME::OnHotkeyRotateItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
int evt_type = 0; // Used to post a wxCommandEvent on demand
wxASSERT( aIdCommand == HK_ROTATE_ITEM );
// Allows block rotate operation on hot key.
if( GetScreen()->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
evt_type = ID_POPUP_ROTATE_BLOCK;
}
else
{
if( !itemCurrentlyEdited )
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
switch( item->Type() )
{
case PCB_MODULE_T:
evt_type = ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE;
break;
case PCB_TEXT_T:
evt_type = ID_POPUP_PCB_ROTATE_TEXTEPCB;
break;
case PCB_MODULE_TEXT_T:
evt_type = ID_POPUP_PCB_ROTATE_TEXTMODULE;
break;
default:
break;
}
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
return true;
}
return false;
}
/*
* Called on a mouse left button double click
*/
void FOOTPRINT_EDIT_FRAME::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = ModeditLocateAndDisplay();
}
if( ( item == NULL ) || ( item->GetFlags() != 0 ) )
break;
// Item found
SetCurItem( item );
OnEditItemRequest( DC, item );
break; // end case 0
case ID_PCB_ADD_LINE_BUTT:
{
if( item && item->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
}
default:
break;
}
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
bool redraw = false;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
Select_Active_Library();
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME * viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
if( viewer == NULL )
{
viewer = new FOOTPRINT_VIEWER_FRAME( this, NULL );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = Create_1_Module( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
wxSemaphore semaphore( 0, 1 );
FOOTPRINT_WIZARD_FRAME *wizard = new FOOTPRINT_WIZARD_FRAME( this, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
wizard->Show( true );
wizard->Zoom_Automatique( false );
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
MODULE* module = wizard->GetBuiltFootprint();
if( module ) // i.e. if create module command not aborted
{
/* Here we should make a copy of the object before adding to board*/
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && getLibPath() != wxEmptyString )
{
Save_Module_In_Library( getLibPath(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->m_Link ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->m_Link == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->m_Link = 0;
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->m_Link );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetScreen()->GetCrossHairPosition();
pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
redraw = true;
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
{
wxString libPath = getLibPath(); // might be empty
wxLogDebug( wxT( "Loading module from library " ) + libPath );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
Clear_Pcb( true );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Load_Module_From_Library( libPath, true );
redraw = true;
}
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
if( GetBoard() && GetBoard()->m_Modules )
{
TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;
TEXTE_MODULE* val = GetBoard()->m_Modules->m_Value;
if( val && ref )
{
ref->SetType( TEXT_is_REFERENCE ); // just in case ...
if( ref->m_Text.Length() == 0 )
ref->m_Text = L"Ref**";
val->SetType( TEXT_is_VALUE ); // just in case ...
if( val->m_Text.Length() == 0 )
val->m_Text = L"Val**";
}
}
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()-> GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
redraw = true;
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
redraw = true;
break;
case ID_POPUP_PCB_EDIT_MODULE:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( (EDGE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
redraw = true;
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame( pos );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
if( redraw )
m_canvas->Refresh();
}
bool PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosition,
EDA_ITEM* aItem )
{
if( aHotkeyCode == 0 )
return false;
bool itemCurrentlyEdited = GetCurItem() && GetCurItem()->GetFlags();
MODULE* module = NULL;
int evt_type = 0; //Used to post a wxCommandEvent on demand
PCB_SCREEN* screen = GetScreen();
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
/* Convert lower to upper case
* (the usual toupper function has problem with non ascii codes like function keys
*/
if( (aHotkeyCode >= 'a') && (aHotkeyCode <= 'z') )
aHotkeyCode += 'A' - 'a';
EDA_HOTKEY* HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, board_edit_Hotkey_List );
if( HK_Descr == NULL )
return false;
int hk_id = HK_Descr->m_Idcommand;
// Create a wxCommandEvent that will be posted in some hot keys functions
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
LAYER_NUM ll;
switch( hk_id )
{
default:
case HK_NOT_FOUND:
return false;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_SWITCH_TRACK_WIDTH_TO_NEXT:
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
if( GetDesignSettings().GetTrackWidthIndex() < GetDesignSettings().m_TrackWidthList.size() - 1 )
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().GetTrackWidthIndex() + 1 );
else
GetDesignSettings().SetTrackWidthIndex( 0 );
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
break;
case HK_SWITCH_TRACK_WIDTH_TO_PREVIOUS:
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
if( GetDesignSettings().GetTrackWidthIndex() <= 0 )
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().m_TrackWidthList.size() -1 );
else
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().GetTrackWidthIndex() - 1 );
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
break;
case HK_SWITCH_GRID_TO_FASTGRID1:
SetFastGrid1();
break;
case HK_SWITCH_GRID_TO_FASTGRID2:
SetFastGrid2();
break;
case HK_SWITCH_GRID_TO_NEXT:
evt_type = ID_POPUP_GRID_NEXT;
break;
case HK_SWITCH_GRID_TO_PREVIOUS:
evt_type = ID_POPUP_GRID_PREV;
break;
case HK_SWITCH_LAYER_TO_PREVIOUS:
ll = GetActiveLayer();
if( !IsCopperLayer( ll ) )
break;
if( ll == F_Cu )
ll = B_Cu;
else if( ll == B_Cu )
ll = ToLAYER_ID( GetBoard()->GetCopperLayerCount() - 2 );
else
ll = ll - 1;
SwitchLayer( aDC, ToLAYER_ID( ll ) );
break;
case HK_SWITCH_LAYER_TO_NEXT:
ll = GetActiveLayer();
if( !IsCopperLayer( ll ) )
break;
if( ll == B_Cu )
ll = F_Cu;
else if( ++ll >= GetBoard()->GetCopperLayerCount() - 1 )
ll = B_Cu;
SwitchLayer( aDC, ToLAYER_ID( ll ) );
break;
case HK_SWITCH_LAYER_TO_COMPONENT:
SwitchLayer( aDC, F_Cu );
break;
case HK_SWITCH_LAYER_TO_COPPER:
SwitchLayer( aDC, B_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER1:
SwitchLayer( aDC, In1_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER2:
SwitchLayer( aDC, In2_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER3:
SwitchLayer( aDC, In3_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER4:
SwitchLayer( aDC, In4_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER5:
SwitchLayer( aDC, In5_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER6:
SwitchLayer( aDC, In6_Cu );
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Board_Editor_Hotkeys_Descr );
break;
case HK_PREFERENCES:
evt_type = wxID_PREFERENCES;
break;
case HK_ZOOM_IN:
evt_type = ID_KEY_ZOOM_IN;
break;
case HK_ZOOM_OUT:
evt_type = ID_KEY_ZOOM_OUT;
break;
case HK_ZOOM_REDRAW:
evt_type = ID_ZOOM_REDRAW;
break;
case HK_ZOOM_AUTO:
evt_type = ID_ZOOM_PAGE;
break;
case HK_ZOOM_CENTER:
evt_type = ID_POPUP_ZOOM_CENTER;
break;
case HK_ZOOM_SELECTION:
evt_type = ID_ZOOM_SELECTION;
break;
case HK_ADD_MODULE:
evt_type = ID_PCB_MODULE_BUTT;
break;
case HK_UNDO:
case HK_REDO:
if( !itemCurrentlyEdited )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED, HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_RESET_LOCAL_COORD: // Set the relative coord
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_SET_GRID_ORIGIN:
PCBNEW_CONTROL::SetGridOrigin( GetGalCanvas()->GetView(), this,
new KIGFX::ORIGIN_VIEWITEM( GetGridOrigin(), UR_TRANSIENT ),
GetCrossHairPosition() );
m_canvas->Refresh();
break;
case HK_RESET_GRID_ORIGIN:
PCBNEW_CONTROL::SetGridOrigin( GetGalCanvas()->GetView(), this,
new KIGFX::ORIGIN_VIEWITEM( GetGridOrigin(), UR_TRANSIENT ),
wxPoint( 0, 0 ) );
m_canvas->Refresh();
break;
case HK_SWITCH_UNITS:
evt_type = (GetUserUnits() == INCHES) ?
ID_TB_OPTIONS_SELECT_UNIT_MM : ID_TB_OPTIONS_SELECT_UNIT_INCH;
break;
case HK_SWITCH_TRACK_DISPLAY_MODE:
displ_opts->m_DisplayPcbTrackFill = !displ_opts->m_DisplayPcbTrackFill;
m_canvas->Refresh();
break;
case HK_DELETE:
OnHotkeyDeleteItem( aDC );
break;
case HK_BACK_SPACE:
if( IsCopperLayer( GetActiveLayer() ) )
{
if( !itemCurrentlyEdited )
{
// no track is currently being edited - select a segment and remove it.
// @todo: possibly? pass the HK command code to PcbGeneralLocateAndDisplay()
// so it can restrict its search to specific item types.
BOARD_ITEM * item = PcbGeneralLocateAndDisplay();
// don't let backspace delete modules!!
if( item && item->IsTrack() )
{
Delete_Segment( aDC, (TRACK*) item );
SetCurItem( NULL );
}
OnModify();
}
else if( GetCurItem()->IsTrack() )
{
// then an element is being edited - remove the last segment.
// simple lines for debugger:
TRACK* track = (TRACK*) GetCurItem();
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
}
}
break;
case HK_GET_AND_MOVE_FOOTPRINT:
if( !itemCurrentlyEdited )
evt_type = ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST;
break;
case HK_FIND_ITEM:
if( !itemCurrentlyEdited )
evt_type = ID_FIND_ITEMS;
break;
case HK_OPEN:
if( !itemCurrentlyEdited )
evt_type = ID_LOAD_FILE ;
break;
case HK_SAVE:
if( !itemCurrentlyEdited )
evt_type = ID_SAVE_BOARD;
break;
case HK_ADD_MICROVIA: // Place a micro via if a track is in progress
if( GetToolId() != ID_TRACK_BUTT )
return true;
if( !itemCurrentlyEdited ) // no track in progress: nothing to do
break;
if( GetCurItem()->Type() != PCB_TRACE_T ) // Should not occur
return true;
if( !GetCurItem()->IsNew() )
return true;
// place micro via and switch layer
if( IsMicroViaAcceptable() )
evt_type = ID_POPUP_PCB_PLACE_MICROVIA;
break;
case HK_ADD_BLIND_BURIED_VIA:
case HK_ADD_THROUGH_VIA: // Switch to alternate layer and Place a via if a track is in progress
if( GetBoard()->GetDesignSettings().m_BlindBuriedViaAllowed &&
hk_id == HK_ADD_BLIND_BURIED_VIA )
GetBoard()->GetDesignSettings().m_CurrentViaType = VIA_BLIND_BURIED;
else
GetBoard()->GetDesignSettings().m_CurrentViaType = VIA_THROUGH;
if( !itemCurrentlyEdited ) // no track in progress: switch layer only
{
Other_Layer_Route( NULL, aDC );
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
break;
}
if( GetToolId() != ID_TRACK_BUTT )
return true;
if( GetCurItem()->Type() != PCB_TRACE_T )
return true;
if( !GetCurItem()->IsNew() )
return true;
evt_type = hk_id == HK_ADD_BLIND_BURIED_VIA ?
ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA : ID_POPUP_PCB_PLACE_THROUGH_VIA;
break;
case HK_SEL_LAYER_AND_ADD_THROUGH_VIA:
case HK_SEL_LAYER_AND_ADD_BLIND_BURIED_VIA:
if( GetCurItem() == NULL || !GetCurItem()->IsNew() ||
GetCurItem()->Type() != PCB_TRACE_T )
break;
evt_type = hk_id == HK_SEL_LAYER_AND_ADD_BLIND_BURIED_VIA ?
ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA :
ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA;
break;
case HK_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
*/
evt_type = ID_POPUP_PCB_SWITCH_TRACK_POSTURE ;
break;
case HK_DRAG_TRACK_KEEP_SLOPE:
OnHotkeyMoveItem( HK_DRAG_TRACK_KEEP_SLOPE );
break;
case HK_PLACE_ITEM:
OnHotkeyPlaceItem( aDC );
break;
case HK_ADD_NEW_TRACK: // Start new track, if possible
OnHotkeyBeginRoute( aDC );
break;
case HK_EDIT_ITEM: // Edit board item
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
case HK_EDIT_MODULE_WITH_MODEDIT: // Edit module with module editor
OnHotkeyEditItem( HK_EDIT_MODULE_WITH_MODEDIT );
break;
case HK_LOCK_UNLOCK_FOOTPRINT: // toggle module "MODULE_is_LOCKED" status:
// get any module, locked or not locked and toggle its locked status
if( !itemCurrentlyEdited )
{
wxPoint pos = RefPos( true );
module = GetBoard()->GetFootprint( pos, screen->m_Active_Layer, true );
}
else if( GetCurItem()->Type() == PCB_MODULE_T )
{
module = (MODULE*) GetCurItem();
}
if( module )
{
SetCurItem( module );
module->SetLocked( !module->IsLocked() );
OnModify();
SetMsgPanel( module );
}
break;
case HK_DRAG_ITEM: // Start drag module or track segment
OnHotkeyMoveItem( HK_DRAG_ITEM );
break;
case HK_MOVE_ITEM: // Start move item
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_COPY_ITEM:
evt_type = OnHotkeyCopyItem();
break;
case HK_ROTATE_ITEM: // Rotation
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
case HK_FLIP_ITEM:
OnHotkeyFlipItem( HK_FLIP_ITEM );
break;
case HK_MOVE_ITEM_EXACT:
case HK_DUPLICATE_ITEM:
case HK_DUPLICATE_ITEM_AND_INCREMENT:
case HK_CREATE_ARRAY:
OnHotkeyDuplicateOrArrayItem( HK_Descr->m_Idcommand );
break;
case HK_SWITCH_HIGHCONTRAST_MODE: // switch to high contrast mode and refresh the canvas
displ_opts->m_ContrastModeDisplay = !displ_opts->m_ContrastModeDisplay;
m_canvas->Refresh();
break;
case HK_CANVAS_CAIRO:
evt_type = ID_MENU_CANVAS_CAIRO;
break;
case HK_CANVAS_OPENGL:
evt_type = ID_MENU_CANVAS_OPENGL;
break;
case HK_CANVAS_LEGACY:
evt_type = ID_MENU_CANVAS_LEGACY;
break;
case HK_ZONE_FILL_OR_REFILL:
evt_type = ID_POPUP_PCB_FILL_ALL_ZONES;
break;
case HK_ZONE_REMOVE_FILLED:
evt_type = ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES;
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
}
return true;
}
bool PCB_EDIT_FRAME::OnHotkeyEditItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( aIdCommand == HK_EDIT_ITEM )
{
// Be sure the corresponding netclass is selected before edit:
SetCurrentNetClass( ( (BOARD_CONNECTED_ITEM*)item )->GetNetClassName() );
evt_type = ID_POPUP_PCB_EDIT_TRACKSEG;
}
break;
case PCB_TEXT_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTEPCB;
break;
case PCB_MODULE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE_PRMS;
else if( aIdCommand == HK_EDIT_MODULE_WITH_MODEDIT )
evt_type = ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT;
break;
case PCB_PAD_T:
// Until dec 2012 a EDIT_MODULE event is posted here to prevent pads
// from being edited by hotkeys.
// Process_Special_Functions takes care of finding the parent.
// After dec 2012 a EDIT_PAD event is posted, because there is no
// reason to not allow pad edit by hotkey
// (pad coordinates are no more modified by rounding, in nanometer version
// when using inches or mm in dialog)
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_PAD;
break;
case PCB_TARGET_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_PCB_TARGET;
break;
case PCB_DIMENSION_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DIMENSION;
break;
case PCB_MODULE_TEXT_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTMODULE;
break;
case PCB_LINE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DRAWING;
break;
case PCB_ZONE_AREA_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_ZONE_PARAMS;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
return true;
}
return false;
}
bool PCB_EDIT_FRAME::OnHotkeyDeleteItem( wxDC* aDC )
{
BOARD_ITEM* item = GetCurItem();
bool ItemFree = (item == NULL) || (item->GetFlags() == 0);
switch( GetToolId() )
{
case ID_TRACK_BUTT:
if( !IsCopperLayer ( GetActiveLayer() ) )
return false;
if( ItemFree )
{
item = PcbGeneralLocateAndDisplay();
if( item && !item->IsTrack() )
return false;
Delete_Track( aDC, (TRACK*) item );
}
else if( item->IsTrack( ) )
{
// simple lines for debugger:
TRACK* track = (TRACK*) item;
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
return true;
}
break;
case ID_PCB_MODULE_BUTT:
if( ItemFree )
{
wxPoint pos = RefPos( false );
MODULE* module = GetBoard()->GetFootprint( pos, UNDEFINED_LAYER, false );
if( module == NULL || module->IsLocked() )
return false;
RemoveStruct( module, aDC );
}
else
return false;
break;
default:
if( ItemFree )
{
item = PcbGeneralLocateAndDisplay();
// Shouldn't there be a check for locked tracks and vias here?
if( item == NULL || (item->Type() == PCB_MODULE_T && (MODULE*)item->IsLocked()) )
return false;
RemoveStruct( item, aDC );
}
else
return false;
}
OnModify();
SetCurItem( NULL );
return true;
}
bool PCB_EDIT_FRAME::OnHotkeyDuplicateOrArrayItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; // Used to post a wxCommandEvent on demand
bool canDuplicate = true;
switch( item->Type() )
{
// Only handle items we know we can handle
case PCB_PAD_T:
canDuplicate = false;
// no break
case PCB_MODULE_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TRACE_T:
case PCB_ZONE_AREA_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
switch( aIdCommand )
{
case HK_CREATE_ARRAY:
if( canDuplicate )
evt_type = ID_POPUP_PCB_CREATE_ARRAY;
break;
case HK_DUPLICATE_ITEM_AND_INCREMENT:
if( canDuplicate )
evt_type = ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT;
break;
case HK_DUPLICATE_ITEM:
if( canDuplicate )
evt_type = ID_POPUP_PCB_DUPLICATE_ITEM;
break;
case HK_MOVE_ITEM_EXACT:
evt_type = ID_POPUP_PCB_MOVE_EXACT;
break;
default:
// We don't handle other commands here
break;
}
break;
default:
evt_type = 0;
break;
}
return PostCommandMenuEvent( evt_type );
}
/* handle the double click on the mouse left button
*/
void PCB_EDIT_FRAME::OnLeftDClick( wxDC* aDC, const wxPoint& aPosition )
{
BOARD_ITEM* DrawStruct = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() != 0) )
break;
SendMessageToEESCHEMA( DrawStruct );
// An item is found
SetCurItem( DrawStruct );
switch( DrawStruct->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( DrawStruct->IsNew() )
{
if( End_Route( (TRACK*) DrawStruct, aDC ) )
m_canvas->SetAutoPanRequest( false );
}
else if( DrawStruct->GetFlags() == 0 )
{
Edit_TrackSegm_Width( aDC, (TRACK*) DrawStruct );
}
break;
case PCB_TEXT_T:
case PCB_PAD_T:
case PCB_MODULE_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
case PCB_MODULE_TEXT_T:
OnEditItemRequest( aDC, DrawStruct );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_LINE_T:
OnEditItemRequest( aDC, DrawStruct );
break;
case PCB_ZONE_AREA_T:
if( DrawStruct->GetFlags() )
break;
OnEditItemRequest( aDC, DrawStruct );
break;
default:
break;
}
break; // end case 0
case ID_TRACK_BUTT:
if( DrawStruct && DrawStruct->IsNew() )
{
if( End_Route( (TRACK*) DrawStruct, aDC ) )
m_canvas->SetAutoPanRequest( false );
}
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
if( End_Zone( aDC ) )
{
m_canvas->SetAutoPanRequest( false );
SetCurItem( NULL );
}
break;
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_CIRCLE_BUTT:
if( DrawStruct == NULL )
break;
if( DrawStruct->Type() != PCB_LINE_T )
{
DisplayError( this, wxT( "DrawStruct Type error" ) );
m_canvas->SetAutoPanRequest( false );
break;
}
if( DrawStruct->IsNew() )
{
End_Edge( (DRAWSEGMENT*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
SetCurItem( NULL );
}
break;
}
}
void PCB_EDIT_FRAME::RemoveStruct( BOARD_ITEM* Item, wxDC* DC )
{
if( Item == NULL )
return;
switch( Item->Type() )
{
case PCB_MODULE_T:
Delete_Module( (MODULE*) Item, DC, true );
break;
case PCB_DIMENSION_T:
DeleteDimension( (DIMENSION*) Item, DC );
break;
case PCB_TARGET_T:
DeleteTarget( (PCB_TARGET*) Item, DC );
break;
case PCB_LINE_T:
Delete_Segment_Edge( (DRAWSEGMENT*) Item, DC );
break;
case PCB_TEXT_T:
Delete_Texte_Pcb( (TEXTE_PCB*) Item, DC );
break;
case PCB_TRACE_T:
Delete_Track( DC, (TRACK*) Item );
break;
case PCB_VIA_T:
Delete_Segment( DC, (TRACK*) Item );
break;
case PCB_ZONE_T:
Delete_OldZone_Fill( (SEGZONE*) Item );
break;
case PCB_ZONE_AREA_T:
{
SetCurItem( NULL );
int netcode = ( (ZONE_CONTAINER*) Item )->GetNetCode();
Delete_Zone_Contour( DC, (ZONE_CONTAINER*) Item );
TestNetConnection( NULL, netcode );
SetMsgPanel( GetBoard() );
}
break;
case PCB_MARKER_T:
if( Item == GetCurItem() )
SetCurItem( NULL );
( (MARKER_PCB*) Item )->Draw( m_canvas, DC, GR_XOR );
// delete the marker, and free memory. Don't use undo stack.
GetBoard()->Delete( Item );
break;
case PCB_PAD_T:
case PCB_MODULE_TEXT_T:
case PCB_MODULE_EDGE_T:
break;
case TYPE_NOT_INIT:
case PCB_T:
default:
{
wxString msg = wxString::Format(
wxT( "Remove: item type %d unknown." ), Item->Type() );
DisplayError( this, msg );
}
break;
}
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
{
wxString library = SelectLibrary( GetCurrentLib() );
if( library.size() )
{
Prj().SetRString( PROJECT::PCB_LIB_NICKNAME, library );
updateTitle();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
// On Windows, Raise() does not bring the window on screen, when iconized
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
if( !Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = CreateNewModule( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
updateView();
m_canvas->Refresh();
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !IsOK( this,
_( "Current Footprint will be lost and this operation cannot be undone. Continue ?" ) ) )
break;
}
FOOTPRINT_WIZARD_FRAME* wizard = (FOOTPRINT_WIZARD_FRAME*) Kiway().Player(
FRAME_PCB_FOOTPRINT_WIZARD_MODAL, true );
if( wizard->ShowModal( NULL, this ) )
{
// Creates the new footprint from python script wizard
MODULE* module = wizard->GetBuiltFootprint();
if( module == NULL ) // i.e. if create module command aborted
break;
Clear_Pcb( false );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Add the new object to board
GetBoard()->Add( module, ADD_APPEND );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
module->ClearFlags();
Zoom_Automatique( false );
updateView();
m_canvas->Refresh();
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && GetCurrentLib().size() )
{
SaveFootprintInLibrary( GetCurrentLib(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( pcbframe == NULL ) // happens when the board editor is not active (or closed)
{
wxMessageBox( _("No board currently edited" ) );
break;
}
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->GetLink() ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
m_toolManager->RunAction( COMMON_ACTIONS::selectionClear, true );
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->SetLink( 0 );
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
if( pcbframe->IsGalCanvasActive() )
{
KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
source_module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
view->Remove( source_module );
}
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->GetLink() );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetCrossHairPosition();
pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
newmodule->SetPosition( wxPoint( 0, 0 ) );
pcbframe->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
if( pcbframe->IsGalCanvasActive() )
{
RN_DATA* ratsnest = pcbframe->GetBoard()->GetRatsnest();
ratsnest->Update( newmodule );
ratsnest->Recalculate();
KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
newmodule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
view->Add( newmodule );
pcbframe->GetGalCanvas()->ForceRefresh();
}
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
m_canvas->Refresh();
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
wxLogDebug( wxT( "Loading module from library " ) + getLibPath() );
if( ! Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
LoadModuleFromLibrary( GetCurrentLib(), Prj().PcbFootprintLibs(), true );
if( GetBoard() && GetBoard()->m_Modules )
{
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
TEXTE_MODULE* ref = &GetBoard()->m_Modules->Reference();
TEXTE_MODULE* val = &GetBoard()->m_Modules->Value();
if( val && ref )
{
ref->SetType( TEXTE_MODULE::TEXT_is_REFERENCE ); // just in case ...
if( ref->GetLength() == 0 )
ref->SetText( wxT( "Ref**" ) );
val->SetType( TEXTE_MODULE::TEXT_is_VALUE ); // just in case ...
if( val->GetLength() == 0 )
val->SetText( wxT( "Val**" ) );
}
}
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
updateView();
m_canvas->Refresh();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
// Currently: not implemented
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetBoard()->m_Modules.GetFirst()->ViewUpdate();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DUPLICATE_ITEM:
duplicateItems( false );
break;
case ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT:
duplicateItems( true );
break;
case ID_POPUP_PCB_MOVE_EXACT:
moveExact();
break;
case ID_POPUP_PCB_CREATE_ARRAY:
createArray();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ) );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( static_cast<EDGE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
case ID_MODEDIT_MODULE_MOVE_EXACT:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
m_canvas->Refresh();
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MOVE_BLOCK_EXACT:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE_EXACT );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_GEN_IMPORT_DXF_FILE:
if( GetBoard()->m_Modules )
{
InvokeDXFDialogModuleImport( this, GetBoard()->m_Modules );
m_canvas->Refresh();
}
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
}
bool PCB_EDIT_FRAME::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
{
wxString msg;
STATUS_FLAGS flags = 0;
bool trackFound = false; // Flag set to true,
// if a track is being the cursor, to avoid
// to display menus relative to tracks twice
bool blockActive = !GetScreen()->m_BlockLocate.IsIdle();
BOARD_ITEM* item = GetCurItem();
m_canvas->SetCanStartBlock( -1 ); // Avoid to start a block command when clicking on menu
// If a command or a block is in progress:
// Put the Cancel command (if needed) and the End command
if( blockActive )
{
createPopUpBlockMenu( aPopMenu );
aPopMenu->AppendSeparator();
return true;
}
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
}
else
{
AddMenuItem( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_( "End Tool" ), KiBitmap( cursor_xpm ) );
}
aPopMenu->AppendSeparator();
}
else
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
aPopMenu->AppendSeparator();
}
}
// Select a proper item
wxPoint cursorPos = GetCrossHairPosition();
wxPoint selectPos = m_Collector->GetRefPos();
selectPos = GetNearestGridPosition( selectPos );
/* We can reselect another item only if there are no item being edited
* because ALL moving functions use GetCurItem(), therefore GetCurItem()
* must return the same item during moving. We know an item is moving
* if( item && (item->m_Flags != 0)) is true and after calling
* PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM,
* not the current item being edited. In such case we cannot call
* PcbGeneralLocateAndDisplay().
*/
if( !item || (item->GetFlags() == 0) )
{
// show the "item selector" menu if no item selected or
// if there is a selected item but the mouse has moved
// (therefore a new item is perhaps under the cursor)
if( !item || cursorPos != selectPos )
{
m_canvas->SetAbortRequest( false );
PcbGeneralLocateAndDisplay();
if( m_canvas->GetAbortRequest() )
{
return false;
}
}
}
item = GetCurItem();
flags = item ? item->GetFlags() : 0;
// Add the context menu, which depends on the picked item:
if( item )
{
switch( item->Type() )
{
case PCB_MODULE_T:
createPopUpMenuForFootprints( (MODULE*) item, aPopMenu );
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
aPopMenu->AppendSeparator();
if( !( (MODULE*) item )->IsLocked() )
{
msg = AddHotkeyName( _("Lock Footprint" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg,
KiBitmap( locked_xpm ) );
}
else
{
msg = AddHotkeyName( _( "Unlock Footprint" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg,
KiBitmap( unlocked_xpm ) );
}
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_( "Automatically Place Footprint" ) );
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE,
_( "Automatically Route Footprint" ) );
}
break;
case PCB_PAD_T:
createPopUpMenuForFpPads( static_cast<D_PAD*>( item ), aPopMenu );
break;
case PCB_MODULE_TEXT_T:
createPopUpMenuForFpTexts( static_cast<TEXTE_MODULE*>( item ), aPopMenu );
break;
case PCB_LINE_T: // Some graphic items on technical layers
if( (flags & IS_NEW) )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_( "End Drawing" ), KiBitmap( checked_ok_xpm ) );
}
if( !flags )
{
msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
msg, KiBitmap( move_xpm ) );
msg = AddHotkeyName( _( "Duplicate Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_line_xpm ) );
msg = AddHotkeyName( _("Move Drawing Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_line_xpm ) );
msg = AddHotkeyName( _("Create Drawing Array" ), g_Board_Editor_Hokeys_Descr,
HK_CREATE_ARRAY );
AddMenuItem( aPopMenu, ID_POPUP_PCB_CREATE_ARRAY,
msg, KiBitmap( array_line_xpm ) );
msg = AddHotkeyName( _( "Edit Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING,
msg, KiBitmap( edit_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING,
_( "Delete Drawing" ), KiBitmap( delete_xpm ) );
if( !IsCopperLayer( item->GetLayer() ) )
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER,
_( "Delete All Drawings on Layer" ), KiBitmap( delete_xpm ) );
}
break;
case PCB_ZONE_T: // Item used to fill a zone
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone Filling" ), KiBitmap( delete_xpm ) );
break;
case PCB_ZONE_AREA_T: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "Close Zone Outline" ), KiBitmap( checked_ok_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Last Corner" ), KiBitmap( delete_xpm ) );
}
else
{
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
}
break;
case PCB_TEXT_T:
createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
trackFound = true;
createPopupMenuForTracks( (TRACK*) item, aPopMenu );
break;
case PCB_MARKER_T:
createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu );
break;
case PCB_DIMENSION_T:
if( !flags )
{
msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Move Dimension Text" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Duplicate Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_text_xpm ) );
msg = AddHotkeyName( _("Move Dimension Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Delete Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_TARGET_T:
if( !flags )
{
msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST,
msg, KiBitmap( move_target_xpm ) );
msg = AddHotkeyName( _("Move Target Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_target_xpm ) );
msg = AddHotkeyName( _( "Duplicate Target" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_target_xpm ) );
msg = AddHotkeyName( _("Create Target Array" ), g_Board_Editor_Hokeys_Descr,
HK_CREATE_ARRAY );
AddMenuItem( aPopMenu, ID_POPUP_PCB_CREATE_ARRAY,
msg, KiBitmap( array_target_xpm ) );
msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_MIRE, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Delete Target" ), g_Board_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_MIRE,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_MODULE_EDGE_T:
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unexpected DrawType %d" ),
item->Type() );
wxMessageBox( msg );
SetCurItem( NULL );
break;
default:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unknown DrawType %d" ),
item->Type() );
wxMessageBox( msg );
// Attempt to clear error (but should no occurs )
if( item->Type() >= MAX_STRUCT_TYPE_ID )
SetCurItem( NULL );
break;
}
aPopMenu->AppendSeparator();
}
if( !flags )
{
msg = AddHotkeyName( _( "Get and Move Footprint" ),
g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST,
msg, KiBitmap( move_module_xpm ) );
}
// Display context sensitive commands:
switch( GetToolId() )
{
case ID_PCB_ZONES_BUTT:
if( GetBoard()->m_ZoneDescriptorList.size() > 0 )
{
aPopMenu->AppendSeparator();
msg = AddHotkeyName( _( "Fill or Refill All Zones" ),
g_Board_Editor_Hokeys_Descr, HK_ZONE_FILL_OR_REFILL );
AddMenuItem( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES,
msg, KiBitmap( fill_zone_xpm ) );
msg = AddHotkeyName( _( "Remove Filled Areas in All Zones" ),
g_Board_Editor_Hokeys_Descr, HK_ZONE_REMOVE_FILLED );
AddMenuItem( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES,
msg, KiBitmap( zone_unfill_xpm ) );
aPopMenu->AppendSeparator();
}
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_KEEPOUT_AREA_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_TRACK_BUTT:
if ( ! trackFound ) // This menu is already added when a track is located
{
aPopMenu->AppendSeparator();
msg = AddHotkeyName( _( "Begin Track" ),
g_Board_Editor_Hokeys_Descr, HK_ADD_NEW_TRACK );
AddMenuItem( aPopMenu, ID_POPUP_PCB_BEGIN_TRACK,
msg, KiBitmap( add_tracks_xpm ) );
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair for Vias" ), KiBitmap( select_layer_pair_xpm ) );
aPopMenu->AppendSeparator();
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_TEXT_BUTT:
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_DIMENSION_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_MODULE_BUTT:
if( !flags )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_( "Footprint Documentation" ), KiBitmap( book_xpm ) );
aPopMenu->AppendSeparator();
}
break;
case ID_NO_TOOL_SELECTED:
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
wxMenu* commands = new wxMenu;
AddMenuItem( aPopMenu, commands, ID_POPUP_PCB_AUTOPLACE_COMMANDS,
_( "Global Spread and Place" ), KiBitmap( move_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_( "Unlock All Footprints" ), KiBitmap( unlocked_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_( "Lock All Footprints" ), KiBitmap( locked_xpm ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_SPREAD_ALL_MODULES,
_( "Spread out All Footprints" ), KiBitmap( move_xpm ) );
commands->Append( ID_POPUP_PCB_SPREAD_NEW_MODULES,
_( "Spread out Footprints not Already on Board" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES,
_( "Automatically Place All Footprints" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES,
_( "Automatically Place New Footprints" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE,
_( "Automatically Place Next Footprints" ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_( "Orient All Footprints" ), KiBitmap( rotate_module_cw_xpm ) );
aPopMenu->AppendSeparator();
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
wxMenu* commands = new wxMenu;
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands );
AddMenuItem( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair" ), KiBitmap( select_layer_pair_xpm ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES,
_( "Automatically Route All Footprints" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) );
aPopMenu->AppendSeparator();
}
if( !trackFound )
{
msg = AddHotkeyName( _( "Begin Track" ), g_Board_Editor_Hokeys_Descr, HK_ADD_NEW_TRACK );
AddMenuItem( aPopMenu, ID_POPUP_PCB_BEGIN_TRACK, msg, KiBitmap( add_tracks_xpm ) );
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
}
break;
}
return true;
}
void FOOTPRINT_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
m_canvas->CrossHairOff( DC );
if( GetToolId() == ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() ) // Move item command in progress
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
PlaceTexteModule( static_cast<TEXTE_MODULE*>( item ), DC );
break;
case PCB_MODULE_EDGE_T:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Place_EdgeMod( static_cast<EDGE_MODULE*>( item ) );
break;
case PCB_PAD_T:
PlacePad( static_cast<D_PAD*>( item ), DC );
break;
default:
{
wxString msg;
msg.Printf( wxT( "WinEDA_ModEditFrame::OnLeftClick err:Struct %d, m_Flag %X" ),
item->Type(), item->GetFlags() );
DisplayError( this, msg );
item->ClearFlags();
break;
}
}
}
else
{
if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
item = ModeditLocateAndDisplay();
SetCurItem( item );
}
}
item = GetCurItem();
bool no_item_edited = item == NULL || item->GetFlags() == 0;
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_MODEDIT_CIRCLE_TOOL:
case ID_MODEDIT_ARC_TOOL:
case ID_MODEDIT_LINE_TOOL:
if( no_item_edited )
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_MODEDIT_CIRCLE_TOOL )
shape = S_CIRCLE;
if( GetToolId() == ID_MODEDIT_ARC_TOOL )
shape = S_ARC;
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) NULL, DC, shape ) );
}
else if( item->IsNew() )
{
if( ( (EDGE_MODULE*) item )->GetShape() == S_CIRCLE )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_ARC )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_SEGMENT )
{
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) item, DC, S_SEGMENT ) );
}
else
{
wxMessageBox( wxT( "ProcessCommand error: unknown shape" ) );
}
}
break;
case ID_MODEDIT_DELETE_TOOL:
if( ! no_item_edited ) // Item in edit, cannot delete it
break;
item = ModeditLocateAndDisplay();
if( item && item->Type() != PCB_MODULE_T ) // Cannot delete the module itself
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
RemoveStruct( item );
SetCurItem( NULL );
}
break;
case ID_MODEDIT_ANCHOR_TOOL:
{
MODULE* module = GetBoard()->m_Modules;
if( module == NULL // No module loaded
|| (module->GetFlags() != 0) )
break;
SaveCopyInUndoList( module, UR_MODEDIT );
// set the new relative internal local coordinates of footprint items
wxPoint moveVector = module->GetPosition() - GetCrossHairPosition();
module->MoveAnchorPosition( moveVector );
// Usually, we do not need to change twice the anchor position,
// so deselect the active tool
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
case ID_MODEDIT_PLACE_GRID_COORD:
m_canvas->DrawGridAxis( DC, GR_XOR, GetBoard()->GetGridOrigin() );
SetGridOrigin( GetCrossHairPosition() );
m_canvas->DrawGridAxis( DC, GR_COPY, GetBoard()->GetGridOrigin() );
GetScreen()->SetModify();
break;
case ID_MODEDIT_TEXT_TOOL:
if( GetBoard()->m_Modules == NULL )
break;
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
CreateTextModule( GetBoard()->m_Modules, DC );
break;
case ID_MODEDIT_PAD_TOOL:
if( GetBoard()->m_Modules )
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
AddPad( GetBoard()->m_Modules, true );
}
break;
default:
DisplayError( this, wxT( "FOOTPRINT_EDIT_FRAME::ProcessCommand error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
m_canvas->CrossHairOn( DC );
}
bool FOOTPRINT_EDIT_FRAME::OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu )
{
BOARD_ITEM* item = GetCurItem();
wxString msg;
bool blockActive = !GetScreen()->m_BlockLocate.IsIdle();
// Simple location of elements where possible.
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
SetCurItem( item = ModeditLocateAndDisplay() );
}
// End command in progress.
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
AddMenuItem( PopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
else
AddMenuItem( PopMenu, ID_POPUP_CLOSE_CURRENT_TOOL, _( "End Tool" ),
KiBitmap( cursor_xpm ) );
PopMenu->AppendSeparator();
}
else
{
if( (item && item->GetFlags()) || blockActive )
{
if( blockActive ) // Put block commands in list
{
AddMenuItem( PopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel Block" ), KiBitmap( cancel_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_ZOOM_BLOCK,
_( "Zoom Block (drag middle mouse)" ),
KiBitmap( zoom_area_xpm ) );
PopMenu->AppendSeparator();
AddMenuItem( PopMenu, ID_POPUP_PLACE_BLOCK,
_( "Place Block" ), KiBitmap( checked_ok_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_COPY_BLOCK,
_( "Copy Block (shift + drag mouse)" ),
KiBitmap( copyblock_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_MIRROR_X_BLOCK,
_( "Mirror Block (alt + drag mouse)" ),
KiBitmap( mirror_h_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_ROTATE_BLOCK,
_( "Rotate Block (ctrl + drag mouse)" ),
KiBitmap( rotate_ccw_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_DELETE_BLOCK,
_( "Delete Block (shift+ctrl + drag mouse)" ),
KiBitmap( delete_xpm ) );
}
else
{
AddMenuItem( PopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
}
PopMenu->AppendSeparator();
}
}
if( blockActive )
return true;
if( item )
{
STATUS_FLAGS flags = item->GetFlags();
switch( item->Type() )
{
case PCB_MODULE_T:
{
wxMenu* transform_choice = new wxMenu;
AddMenuItem( transform_choice, ID_MODEDIT_MODULE_ROTATE, _( "Rotate" ),
KiBitmap( rotate_module_ccw_xpm ) );
AddMenuItem( transform_choice, ID_MODEDIT_MODULE_MIRROR, _( "Mirror" ),
KiBitmap( mirror_footprint_axisY_xpm ) );
msg = AddHotkeyName( _( "Edit Module" ), g_Module_Editor_Hokeys_Descr, HK_EDIT_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_EDIT_MODULE_PRMS, msg, KiBitmap( edit_module_xpm ) );
AddMenuItem( PopMenu, transform_choice, ID_MODEDIT_TRANSFORM_MODULE,
_( "Transform Module" ), KiBitmap( edit_xpm ) );
break;
}
case PCB_PAD_T:
if( !flags )
{
msg = AddHotkeyName( _("Move Pad" ), g_Module_Editor_Hokeys_Descr, HK_MOVE_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_MOVE_PAD_REQUEST, msg, KiBitmap( move_pad_xpm ) );
}
msg = AddHotkeyName( _("Edit Pad" ), g_Module_Editor_Hokeys_Descr, HK_EDIT_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_EDIT_PAD, msg, KiBitmap( options_pad_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_PCB_IMPORT_PAD_SETTINGS,
_( "New Pad Settings" ), KiBitmap( options_new_pad_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_PCB_EXPORT_PAD_SETTINGS,
_( "Export Pad Settings" ), KiBitmap( export_options_pad_xpm ) );
msg = AddHotkeyName( _("Delete Pad" ), g_Module_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( PopMenu, ID_POPUP_PCB_DELETE_PAD, msg, KiBitmap( delete_pad_xpm ) );
if( !flags )
{
PopMenu->AppendSeparator();
AddMenuItem( PopMenu, ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS,
_( "Global Pad Settings" ), KiBitmap( global_options_pad_xpm ) );
}
break;
case PCB_MODULE_TEXT_T:
if( !flags )
{
msg = AddHotkeyName( _("Move Text Mod." ), g_Module_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST, msg,
KiBitmap( move_field_xpm ) );
}
msg = AddHotkeyName( _("Rotate Text Mod." ), g_Module_Editor_Hokeys_Descr,
HK_ROTATE_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_ROTATE_TEXTMODULE, msg, KiBitmap( rotate_field_xpm ) );
if( !flags )
{
msg = AddHotkeyName( _("Edit Text Mod." ), g_Module_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_EDIT_TEXTMODULE, msg, KiBitmap( edit_text_xpm ) );
if( ( static_cast<TEXTE_MODULE*>( item ) )->GetType() == TEXTE_MODULE::TEXT_is_DIVERS )
{
msg = AddHotkeyName( _("Delete Text Mod." ), g_Module_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( PopMenu, ID_POPUP_PCB_DELETE_TEXTMODULE, msg,
KiBitmap( delete_text_xpm ) );
}
}
break;
case PCB_MODULE_EDGE_T:
{
if( (flags & IS_NEW) )
AddMenuItem( PopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING, _( "End edge" ),
KiBitmap( checked_ok_xpm ) );
if( !flags )
{
msg = AddHotkeyName( _("Move Edge" ), g_Module_Editor_Hokeys_Descr, HK_MOVE_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_MOVE_EDGE, msg, KiBitmap( move_line_xpm ) );
}
if( ( flags & (IS_NEW | IS_MOVED) ) == IS_MOVED )
AddMenuItem( PopMenu, ID_POPUP_PCB_PLACE_EDGE, _( "Place edge" ),
KiBitmap( checked_ok_xpm ) );
msg = AddHotkeyName( _("Edit" ), g_Module_Editor_Hokeys_Descr, HK_EDIT_ITEM );
AddMenuItem( PopMenu, ID_POPUP_MODEDIT_EDIT_BODY_ITEM,
msg, KiBitmap( options_segment_xpm ) );
msg = AddHotkeyName( _("Delete Edge" ), g_Module_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( PopMenu, ID_POPUP_PCB_DELETE_EDGE, msg, KiBitmap( delete_xpm ) );
wxMenu* edit_global_mnu = new wxMenu;
AddMenuItem( PopMenu, edit_global_mnu, ID_POPUP_MODEDIT_GLOBAL_EDIT_EDGE,
_( "Global Changes" ), KiBitmap( edit_xpm ) );
AddMenuItem( edit_global_mnu, ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE,
_( "Change Body Items Width" ), KiBitmap( width_segment_xpm ) );
AddMenuItem( edit_global_mnu, ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE,
_( "Change Body Items Layer" ), KiBitmap( select_layer_pair_xpm ) );
}
break;
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_VIA_T:
case PCB_TRACE_T:
case PCB_ZONE_T:
case PCB_MARKER_T:
case PCB_DIMENSION_T:
case PCB_TARGET_T:
msg.Printf( wxT( "FOOTPRINT_EDIT_FRAME::OnRightClick Error: Unexpected DrawType %d" ),
item->Type() );
DisplayError( this, msg );
break;
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "FOOTPRINT_EDIT_FRAME::OnRightClick Error: illegal DrawType %d" ),
item->Type() );
DisplayError( this, msg );
break;
default:
msg.Printf( wxT( "FOOTPRINT_EDIT_FRAME::OnRightClick Error: unknown DrawType %d" ),
item->Type() );
DisplayError( this, msg );
break;
}
PopMenu->AppendSeparator();
}
if( ( GetToolId() == ID_MODEDIT_LINE_TOOL ) ||
( GetToolId() == ID_MODEDIT_CIRCLE_TOOL ) ||
( GetToolId() == ID_MODEDIT_ARC_TOOL ) )
{
AddMenuItem( PopMenu, ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH, _("Set Line Width" ),
KiBitmap( width_segment_xpm ) );
PopMenu->AppendSeparator();
}
return true;
}
bool PCB_EDIT_FRAME::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
{
wxString msg;
int flags = 0;
bool locate_track = false;
bool blockActive = (GetScreen()->m_BlockLocate.m_Command != BLOCK_IDLE);
wxClientDC dc( m_canvas );
BOARD_ITEM* item = GetCurItem();
m_canvas->SetCanStartBlock( -1 ); // Avoid to start a block coomand when clicking on menu
// If a command or a block is in progress:
// Put the Cancel command (if needed) and the End command
if( blockActive )
{
createPopUpBlockMenu( aPopMenu );
aPopMenu->AppendSeparator();
return true;
}
m_canvas->CrossHairOff( &dc );
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
}
else
{
AddMenuItem( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_( "End Tool" ), KiBitmap( cursor_xpm ) );
}
aPopMenu->AppendSeparator();
}
else
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
aPopMenu->AppendSeparator();
}
}
/* Select a proper item */
wxPoint cursorPos = GetScreen()->GetCrossHairPosition();
wxPoint selectPos = m_Collector->GetRefPos();
selectPos = GetScreen()->GetNearestGridPosition( selectPos );
/* We can reselect another item only if there are no item being edited
* because ALL moving functions use GetCurItem(), therefore GetCurItem()
* must return the same item during moving. We know an item is moving
* if( item && (item->m_Flags != 0)) is true and after calling
* PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM,
* not the current item being edited. In such case we cannot call
* PcbGeneralLocateAndDisplay().
*/
if( !item || (item->GetFlags() == 0) )
{
// show "item selector" menu only if no item now or selected item was not
// previously picked at this position
if( !item || cursorPos != selectPos )
{
m_canvas->SetAbortRequest( false );
item = PcbGeneralLocateAndDisplay();
if( m_canvas->GetAbortRequest() )
{
m_canvas->CrossHairOn( &dc );
return false;
}
}
}
item = GetCurItem();
if( item )
flags = item->GetFlags();
else
flags = 0;
if( item )
{
switch( item->Type() )
{
case PCB_MODULE_T:
createPopUpMenuForFootprints( (MODULE*) item, aPopMenu );
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
aPopMenu->AppendSeparator();
if( !( (MODULE*) item )->IsLocked() )
{
msg = AddHotkeyName( _("Lock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg,
KiBitmap( locked_xpm ) );
}
else
{
msg = AddHotkeyName( _( "Unlock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg,
KiBitmap( unlocked_xpm ) );
}
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_( "Auto Place Module" ) );
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE, _( "Autoroute Module" ) );
}
break;
case PCB_PAD_T:
createPopUpMenuForFpPads( (D_PAD*) item, aPopMenu );
break;
case PCB_MODULE_TEXT_T:
createPopUpMenuForFpTexts( (TEXTE_MODULE*) item, aPopMenu );
break;
case PCB_LINE_T: // Some graphic items on technical layers
if( (flags & IS_NEW) )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_( "End Drawing" ), KiBitmap( apply_xpm ) );
}
if( !flags )
{
msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
msg, KiBitmap( move_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING, _( "Edit Drawing" ),
KiBitmap( edit_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING,
_( "Delete Drawing" ), KiBitmap( delete_xpm ) );
if( item->GetLayer() > LAST_COPPER_LAYER )
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER,
_( "Delete All Drawing on Layer" ), KiBitmap( delete_xpm ) );
}
break;
case PCB_ZONE_T: // Item used to fill a zone
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone Filling" ), KiBitmap( delete_xpm ) );
break;
case PCB_ZONE_AREA_T: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "Close Zone Outline" ), KiBitmap( apply_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Last Corner" ), KiBitmap( delete_xpm ) );
}
else
{
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
}
break;
case PCB_TEXT_T:
createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
locate_track = true;
createPopupMenuForTracks( (TRACK*) item, aPopMenu );
break;
case PCB_MARKER_T:
createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu );
break;
case PCB_DIMENSION_T:
if( !flags )
{
msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Move Dimension Text" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Delete Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_TARGET_T:
if( !flags )
{
msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST, msg, KiBitmap( move_xpm ) );
msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_MIRE, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Delete Target" ), g_Board_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_MIRE,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_MODULE_EDGE_T:
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unexpected DrawType %d" ),
item->Type() );
wxMessageBox( msg );
SetCurItem( NULL );
break;
default:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unknown DrawType %d" ),
item->Type() );
wxMessageBox( msg );
// Attempt to clear error (but should no occurs )
if( item->Type() >= MAX_STRUCT_TYPE_ID )
SetCurItem( NULL );
break;
}
aPopMenu->AppendSeparator();
}
if( !flags )
{
msg = AddHotkeyName( _( "Get and Move Footprint" ),
g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST,
msg, KiBitmap( move_module_xpm ) );
}
/* Display context sensitive commands: */
switch( GetToolId() )
{
case ID_PCB_ZONES_BUTT:
if( GetBoard()->m_ZoneDescriptorList.size() > 0 )
{
aPopMenu->AppendSeparator();
AddMenuItem( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES,
_( "Fill or Refill All Zones" ), KiBitmap( fill_zone_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES,
_( "Remove Filled Areas in All Zones" ), KiBitmap( zone_unfill_xpm ) );
aPopMenu->AppendSeparator();
}
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_TRACK_BUTT:
if ( ! locate_track ) // This menu is already added when a track is located
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair for Vias" ), KiBitmap( select_layer_pair_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_TEXT_BUTT:
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_DIMENSION_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_MODULE_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_( "Footprint Documentation" ), KiBitmap( book_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_NO_TOOL_SELECTED:
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
wxMenu* commands = new wxMenu;
AddMenuItem( aPopMenu, commands, ID_POPUP_PCB_AUTOPLACE_COMMANDS,
_( "Glob Move and Place" ), KiBitmap( move_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_( "Unlock All Modules" ), KiBitmap( unlocked_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_( "Lock All Modules" ), KiBitmap( locked_xpm ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_AUTOMOVE_ALL_MODULES,
_( "Move All Modules" ), KiBitmap( move_xpm ) );
commands->Append( ID_POPUP_PCB_AUTOMOVE_NEW_MODULES, _( "Move New Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES, _( "Autoplace All Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES, _( "Autoplace New Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE, _( "Autoplace Next Module" ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_( "Orient All Modules" ), KiBitmap( rotate_module_pos_xpm ) );
aPopMenu->AppendSeparator();
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
wxMenu* commands = new wxMenu;
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands );
AddMenuItem( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair" ), KiBitmap( select_layer_pair_xpm ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES, _( "Autoroute All Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) );
aPopMenu->AppendSeparator();
}
if( locate_track )
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
}
m_canvas->CrossHairOn( &dc );
return true;
}
/*
* Called on a mouse left button double click
*/
void FOOTPRINT_EDIT_FRAME::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = ModeditLocateAndDisplay();
}
if( ( item == NULL ) || ( item->GetFlags() != 0 ) )
break;
// Item found
SetCurItem( item );
switch( item->Type() )
{
case PCB_PAD_T:
InstallPadOptionsFrame( (D_PAD*) item );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_MODULE_T:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) item );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case PCB_MODULE_TEXT_T:
InstallTextModOptionsFrame( (TEXTE_MODULE*) item, DC );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_MODULE_EDGE_T :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) item );
m_canvas->Refresh();
break;
default:
break;
}
break; // end case 0
case ID_PCB_ADD_LINE_BUTT:
{
if( item && item->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
}
default:
break;
}
}
/* Handle the left button mouse click, when a tool is active
*/
void PCB_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
BOARD_ITEM* DrawStruct = GetCurItem();
bool exit = false;
bool no_tool = GetToolId() == ID_NO_TOOL_SELECTED;
if( no_tool || ( DrawStruct && DrawStruct->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
if( DrawStruct && DrawStruct->GetFlags() ) // Command in progress
{
m_canvas->SetIgnoreMouseEvents( true );
m_canvas->CrossHairOff( aDC );
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
if( DrawStruct->IsNew() )
{
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
}
else
{
End_Move_Zone_Corner_Or_Outlines( aDC, (ZONE_CONTAINER*) DrawStruct );
}
exit = true;
break;
case PCB_TRACE_T:
case PCB_VIA_T:
if( DrawStruct->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_TEXT_T:
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_TEXT_T:
PlaceTexteModule( (TEXTE_MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_PAD_T:
PlacePad( (D_PAD*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_T:
PlaceModule( (MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_TARGET_T:
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
exit = true;
break;
case PCB_LINE_T:
if( no_tool ) // when no tools: existing item moving.
{
Place_DrawItem( (DRAWSEGMENT*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_DIMENSION_T:
if( ! DrawStruct->IsNew() )
{ // We are moving the text of an existing dimension. Place it
PlaceDimensionText( (DIMENSION*) DrawStruct, aDC );
exit = true;
}
break;
default:
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() err: DrawType %d m_Flags != 0" ),
DrawStruct->Type() );
exit = true;
break;
}
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->CrossHairOn( aDC );
if( exit )
return;
}
else if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
}
}
if( DrawStruct ) // display netclass info for zones, tracks and pads
{
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
case PCB_TRACE_T:
case PCB_VIA_T:
case PCB_PAD_T:
GetDesignSettings().SetCurrentNetClass(
((BOARD_CONNECTED_ITEM*)DrawStruct)->GetNetClassName() );
updateTraceWidthSelectBox();
updateViaSizeSelectBox();
break;
default:
break;
}
}
switch( GetToolId() )
{
case ID_MAIN_MENUBAR:
case ID_NO_TOOL_SELECTED:
break;
case ID_PCB_MUWAVE_TOOL_SELF_CMD:
case ID_PCB_MUWAVE_TOOL_GAP_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_ARC_CMD:
case ID_PCB_MUWAVE_TOOL_FUNCTION_SHAPE_CMD:
MuWaveCommand( aDC, aPosition );
break;
case ID_PCB_HIGHLIGHT_BUTT:
{
int netcode = SelectHighLight( aDC );
if( netcode < 0 )
SetMsgPanel( GetBoard() );
else
{
NETINFO_ITEM* net = GetBoard()->FindNet( netcode );
if( net )
{
MSG_PANEL_ITEMS items;
net->GetMsgPanelInfo( items );
SetMsgPanel( items );
}
}
}
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
DrawStruct = PcbGeneralLocateAndDisplay();
Show_1_Ratsnest( DrawStruct, aDC );
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
break;
case ID_PCB_MIRE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( (BOARD_ITEM*) CreateTarget( aDC ) );
m_canvas->MoveCursorToCrossHair();
}
else if( DrawStruct->Type() == PCB_TARGET_T )
{
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TARGET_T" ) );
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_LINE_BUTT:
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_PCB_CIRCLE_BUTT )
shape = S_CIRCLE;
if( GetToolId() == ID_PCB_ARC_BUTT )
shape = S_ARC;
if( IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Graphic not allowed on Copper layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( NULL, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct
&& (DrawStruct->Type() == PCB_LINE_T)
&& DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( (DRAWSEGMENT*) DrawStruct, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
}
break;
case ID_TRACK_BUTT:
if( !IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Tracks on Copper layers only " ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_Route( NULL, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && DrawStruct->IsNew() )
{
TRACK* track = Begin_Route( (TRACK*) DrawStruct, aDC );
// SetCurItem() must not write to the msg panel
// because a track info is displayed while moving the mouse cursor
if( track ) // A new segment was created
SetCurItem( DrawStruct = (BOARD_ITEM*) track, false );
m_canvas->SetAutoPanRequest( true );
}
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
/* ZONE or KEEPOUT Tool is selected. Determine action for a left click:
* this can be start a new zone or select and move an existing zone outline corner
* if found near the mouse cursor
*/
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
if( Begin_Zone( aDC ) )
{
m_canvas->SetAutoPanRequest( true );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
}
else if( DrawStruct && (DrawStruct->Type() == PCB_ZONE_AREA_T) && DrawStruct->IsNew() )
{ // Add a new corner to the current outline being created:
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
else
{
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() zone internal error" ) );
}
break;
case ID_PCB_ADD_TEXT_BUTT:
if( IsLayerInList( EDGE_LAYER, GetActiveLayer() ) )
{
DisplayError( this,
_( "Texts not allowed on Edge Cut layer" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( CreateTextePcb( aDC ) );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct->Type() == PCB_TEXT_T )
{
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TEXT_T" ) );
}
break;
case ID_PCB_MODULE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
m_canvas->MoveCursorToCrossHair();
DrawStruct = (BOARD_ITEM*) LoadModuleFromLibrary(
wxEmptyString, Prj().PcbFootprintLibs(), true, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
StartMoveModule( (MODULE*) DrawStruct, aDC, false );
}
else if( DrawStruct->Type() == PCB_MODULE_T )
{
PlaceModule( (MODULE*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "Internal err: Struct not PCB_MODULE_T" ) );
}
break;
case ID_PCB_DIMENSION_BUTT:
if( IsLayerInList( EDGE_LAYER|ALL_CU_LAYERS, GetActiveLayer() ) )
{
DisplayError( this,
_( "Dimension not allowed on Copper or Edge Cut layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) EditDimension( NULL, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && (DrawStruct->Type() == PCB_DIMENSION_T) && DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) EditDimension( (DIMENSION*) DrawStruct, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else
{
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() error item is not a DIMENSION" ) );
}
break;
case ID_PCB_DELETE_ITEM_BUTT:
if( !DrawStruct || !DrawStruct->GetFlags() )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct && (DrawStruct->GetFlags() == 0) )
{
RemoveStruct( DrawStruct, aDC );
SetCurItem( DrawStruct = NULL );
}
}
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
m_canvas->DrawAuxiliaryAxis( aDC, GR_XOR );
SetAuxOrigin( GetCrossHairPosition() );
m_canvas->DrawAuxiliaryAxis( aDC, GR_COPY );
OnModify();
break;
case ID_PCB_PLACE_GRID_COORD_BUTT:
m_canvas->DrawGridAxis( aDC, GR_XOR, GetBoard()->GetGridOrigin() );
SetGridOrigin( GetCrossHairPosition() );
m_canvas->DrawGridAxis( aDC, GR_COPY, GetBoard()->GetGridOrigin() );
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() id error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
}
bool PCB_EDIT_FRAME::OnHotkeyMoveItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; // Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TRACK_NODE;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_TRACK_SEGMENT;
if( aIdCommand == HK_DRAG_TRACK_KEEP_SLOPE )
evt_type = ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE;
break;
case PCB_MODULE_T:
{
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
}
break;
case PCB_PAD_T:
// Post MODULE_REQUEST events here to prevent pads
// from being moved or dragged by hotkeys.
// Process_Special_Functions takes care of finding
// the parent.
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
break;
case PCB_TEXT_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST;
break;
case PCB_TARGET_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_PCB_TARGET_REQUEST;
break;
case PCB_ZONE_AREA_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_ZONE_OUTLINES;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT;
break;
case PCB_MODULE_TEXT_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST;
break;
case PCB_LINE_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_DRAWING_REQUEST;
break;
case PCB_DIMENSION_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
return true;
}
return false;
}
// Handles the selection of command events.
void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
LAYER_NUM itmp;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
MODULE* module;
m_canvas->CrossHairOff( &dc );
switch( id ) // Some (not all ) edit commands must be finished or aborted
{
case wxID_CUT:
case wxID_COPY:
case ID_PCB_USER_GRID_SETUP:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_FLIP_TEXTEPCB:
case ID_POPUP_PCB_COPY_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_EDIT_MIRE:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_PCB_BEGIN_TRACK:
case ID_POPUP_PCB_END_TRACK:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_MICROVIA:
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
case ID_POPUP_PCB_FILL_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
case ID_POPUP_PCB_DELETE_ZONE:
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
case ID_POPUP_PCB_ADD_ZONE_CORNER:
case ID_POPUP_PCB_DELETE_TRACKSEG:
case ID_POPUP_PCB_DELETE_TRACK:
case ID_POPUP_PCB_DELETE_TRACKNET:
case ID_POPUP_PCB_FILL_ZONE:
case ID_POPUP_PCB_SELECT_LAYER:
case ID_POPUP_PCB_SELECT_CU_LAYER:
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
case ID_POPUP_PCB_BREAK_TRACK:
case ID_POPUP_PCB_EDIT_NET:
case ID_POPUP_PCB_EDIT_TRACK:
case ID_POPUP_PCB_EDIT_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACK:
case ID_POPUP_PCB_LOCK_OFF_TRACK:
case ID_POPUP_PCB_LOCK_ON_NET:
case ID_POPUP_PCB_LOCK_OFF_NET:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_FLIP_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_PCB_EDIT_DRAWING:
case ID_POPUP_PCB_GETINFO_MARKER:
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
}
// Should not be executed, just in case
if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
{
GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
GetScreen()->m_BlockLocate.ClearItemsList();
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
else
SetCursor( (wxStockCursor) m_canvas->GetDefaultCursor() );
break;
default: // Finish (abort) the command
if( m_canvas->IsMouseCaptured() )
m_canvas->CallEndMouseCapture( &dc );
if( GetToolId() != id )
{
if( m_lastDrawToolId != GetToolId() )
m_lastDrawToolId = GetToolId();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
}
switch( id ) // Execute command
{
case 0:
break;
case ID_OPEN_MODULE_EDITOR:
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, false );
if( !editor )
{
editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Show( true );
editor->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( editor->IsIconized() )
editor->Iconize( false );
*/
editor->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != editor )
editor->SetFocus();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( viewer->IsIconized() )
viewer->Iconize( false );
*/
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_PCB_GLOBAL_DELETE:
InstallPcbGlobalDeleteFrame( wxDefaultPosition );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_FLIP_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_FLIP );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_DRC_CONTROL:
m_drc->ShowDialog();
break;
case ID_GET_NETLIST:
InstallNetlistFrame( &dc );
break;
case ID_FIND_ITEMS:
InstallFindFrame();
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_END_LINE:
m_canvas->MoveCursorToCrossHair();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_EDIT_TRACK:
if( GetCurItem() == NULL )
break;
Edit_Track_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_TRACKSEG:
if( GetCurItem() == NULL )
break;
Edit_TrackSegm_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
if( GetCurItem() == NULL )
break;
{
int type = GetCurItem()->Type();
if( type == PCB_TRACE_T || type == PCB_VIA_T )
{
BOARD_CONNECTED_ITEM*item = (BOARD_CONNECTED_ITEM*) GetCurItem();
DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS dlg( this, item->GetNetCode() );
dlg.ShowModal();
}
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_BEGIN_TRACK:
m_canvas->MoveCursorToCrossHair();
OnHotkeyBeginRoute( &dc );
break;
case ID_POPUP_PCB_END_TRACK:
m_canvas->MoveCursorToCrossHair();
End_Route( (TRACK*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
break;
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
* If a track is in progress, it will be redrawn
*/
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
g_Alternate_Track_Posture = !g_Alternate_Track_Posture;
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
if( !IsMicroViaAcceptable() )
break;
// fall through
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
else
{
BOARD_DESIGN_SETTINGS &settings = GetDesignSettings();
VIATYPE_T v_type = settings.m_CurrentViaType;
switch( id )
{
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
settings.m_CurrentViaType = VIA_BLIND_BURIED;
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
settings.m_CurrentViaType = VIA_MICROVIA;
break;
default:
settings.m_CurrentViaType = VIA_THROUGH;
break;
}
// place via and switch layer.
if( id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA ||
id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA )
{
m_canvas->SetIgnoreMouseEvents( true );
wxPoint dlgPosition;
wxGetMousePosition( &dlgPosition.x, &dlgPosition.y );
LAYER_NUM layer = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS,
dlgPosition );
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->MoveCursorToCrossHair();
if( getActiveLayer() != layer )
{
GetScreen()->m_Route_Layer_TOP = getActiveLayer();
GetScreen()->m_Route_Layer_BOTTOM = layer;
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
}
}
else
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
settings.m_CurrentViaType = v_type;
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
SetCurItem( Delete_Segment( &dc, (TRACK*) GetCurItem() ) );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACK:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
Delete_Track( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACKNET:
m_canvas->MoveCursorToCrossHair();
Delete_net( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), true );
break;
case ID_POPUP_PCB_LOCK_OFF_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), false );
break;
case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
break;
case ID_POPUP_PCB_DELETE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() == NULL )
break;
{
SEGZONE* zsegm = (SEGZONE*) GetCurItem();
int netcode = zsegm->GetNetCode();
Delete_OldZone_Fill( zsegm );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
OnModify();
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
Edit_Zone_Params( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL ); // Outlines can have changed
break;
case ID_POPUP_PCB_ZONE_DUPLICATE:
{
ZONE_CONTAINER* zone = (ZONE_CONTAINER*) GetCurItem();
duplicateZone( &dc, zone );
}
break;
case ID_POPUP_PCB_ZONE_ADD_SIMILAR_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Similar_Zone( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_ZONE_ADD_CUTOUT_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Zone_Cutout( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_ZONE_CONTAINER:
case ID_POPUP_PCB_DELETE_ZONE_CUTOUT:
m_canvas->MoveCursorToCrossHair();
{
int netcode = ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode();
Delete_Zone_Contour( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_DELETE_ZONE_CORNER:
Remove_Zone_Corner( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), false );
break;
}
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Drag_Outline_Edge( &dc, zone_cont, zone_cont->GetSelectedCorner() );
break;
}
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Outlines( &dc, zone_cont );
break;
}
case ID_POPUP_PCB_ADD_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
wxPoint pos = GetCrossHairPosition();
/* add corner between zone_cont->m_CornerSelection
* and zone_cont->m_CornerSelection+1
* and start move the new corner
*/
zone_cont->Draw( m_canvas, &dc, GR_XOR );
zone_cont->Outline()->InsertCorner( zone_cont->GetSelectedCorner(), pos.x, pos.y );
zone_cont->SetSelectedCorner( zone_cont->GetSelectedCorner() + 1 );
zone_cont->Draw( m_canvas, &dc, GR_XOR );
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), true );
break;
}
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
End_Move_Zone_Corner_Or_Outlines( &dc, zone_cont );
m_canvas->SetAutoPanRequest( false );
break;
}
case ID_POPUP_PCB_FILL_ALL_ZONES:
m_canvas->MoveCursorToCrossHair();
Fill_All_Zones( this );
m_canvas->Refresh();
SetMsgPanel( GetBoard() );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
if( ( GetCurItem() )->Type() == PCB_ZONE_AREA_T )
{
ZONE_CONTAINER* zone_container = (ZONE_CONTAINER*) GetCurItem();
zone_container->UnFill();
TestNetConnection( NULL, zone_container->GetNetCode() );
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
}
SetCurItem( NULL );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES: // Remove all zones :
GetBoard()->m_Zone.DeleteAll(); // remove zone segments used to fill zones.
for( int ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
{
// Remove filled areas in zone
ZONE_CONTAINER* zone_container = GetBoard()->GetArea( ii );
zone_container->ClearFilledPolysList();
}
SetCurItem( NULL ); // CurItem might be deleted by this command, clear the pointer
TestConnections();
TestForActiveLinksInRatsnest( 0 ); // Recalculate the active ratsnest, i.e. the unconnected links
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_FILL_ZONE:
m_canvas->MoveCursorToCrossHair();
Fill_Zone( (ZONE_CONTAINER*) GetCurItem() );
TestNetConnection( NULL, ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode() );
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
StartMoveTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
if( GetCurItem() == NULL )
break;
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
SetCrossHairPosition( module->GetPosition() );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, id == ID_POPUP_PCB_DRAG_MODULE_REQUEST );
break;
case ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST: // get module by name and move it
SetCurItem( GetModuleByName() );
module = (MODULE*) GetCurItem();
if( module == NULL )
break;
if( module->IsLocked() )
{
wxString msg = wxString::Format(
_( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, false );
break;
case ID_POPUP_PCB_DELETE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
if( Delete_Module( (MODULE*) GetCurItem(), &dc, true ) )
{
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), m_rotationAngle, true );
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), -m_rotationAngle, true );
break;
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple flip, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_FLIPPED, ((MODULE*)GetCurItem())->GetPosition() );
Change_Side_Module( (MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
InstallModuleOptionsFrame( (MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
if( GetCurItem()->GetTimeStamp() == 0 ) // Module Editor needs a non null timestamp
{
GetCurItem()->SetTimeStamp( GetNewTimeStamp() );
OnModify();
}
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( (MODULE*)GetCurItem() );
SetCurItem( NULL ); // the current module could be deleted by
editor->Show( true );
editor->Raise(); // Iconize( false );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DRAG_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
Import_Pad_Settings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
DlgGlobalChange_PadSettings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
DeletePad( (D_PAD*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_RESET_TEXT_SIZE:
ResetTextSize( GetCurItem(), &dc );
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetCurItem(),
&dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
DeleteTextModule( (TEXTE_MODULE*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_LAYER:
itmp = SelectLayer( getActiveLayer() );
if( itmp >= 0 )
{
// if user changed colors and we are in high contrast mode, then redraw
// because the PAD_SMD pads may change color.
if( DisplayOpt.ContrastModeDisplay && getActiveLayer() != itmp )
{
m_canvas->Refresh();
}
setActiveLayer( itmp );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
break;
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
break;
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
m_canvas->MoveCursorToCrossHair();
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
setActiveLayer( m_SelLayerBox->GetLayerSelection() );
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh( true );
break;
case ID_POPUP_PCB_EDIT_TEXTEPCB:
InstallTextPCBOptionsFrame( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
Rotate_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_COPY_TEXTEPCB:
CreateTextePcb( &dc, (TEXTE_PCB*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_FLIP_TEXTEPCB:
FlipTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTEPCB:
Delete_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
BeginMoveTarget( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MIRE:
ShowTargetOptionsDialog( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MIRE:
m_canvas->MoveCursorToCrossHair();
DeleteTarget( (PCB_TARGET*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_DELETE_DIMENSION:
m_canvas->MoveCursorToCrossHair();
DeleteDimension( (DIMENSION*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_EDIT_DIMENSION:
ShowDimensionPropertyDialog( (DIMENSION*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
BeginMoveDimensionText( (DIMENSION*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_DELETE_DRAWING:
Delete_Segment_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MARKER:
RemoveStruct( GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_GETINFO_MARKER:
if( GetCurItem() && GetCurItem()->Type() == PCB_MARKER_T )
( (MARKER_PCB*) GetCurItem() )->DisplayMarkerInfo( this );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
if( GetCurItem()->GetFlags() != 0 )
break;
Delete_Drawings_All_Layer( GetCurItem()->GetLayer() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_DRAWING:
#ifndef USE_WX_OVERLAY
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), &dc );
#else
// #1277772 - Draw into dialog converted in refresh request
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), NULL );
m_canvas->Refresh();
#endif
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
m_canvas->MoveCursorToCrossHair();
Start_Move_DrawItem( (DRAWSEGMENT*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
End_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( End_Zone( &dc ) )
SetCurItem( NULL );
}
m_canvas->SetAutoPanRequest( false );
break;
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( Delete_LastCreatedCorner( &dc ) == 0 ) // No more segment in outline,
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
m_canvas->MoveCursorToCrossHair();
Start_DragTrackSegmentAndKeepSlope( (TRACK*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_BREAK_TRACK:
m_canvas->MoveCursorToCrossHair();
{
TRACK* track = (TRACK*) GetScreen()->GetCurItem();
wxPoint pos = GetCrossHairPosition();
track->Draw( m_canvas, &dc, GR_XOR );
PICKED_ITEMS_LIST itemsListPicker;
TRACK* newtrack = GetBoard()->CreateLockPoint( pos, track, &itemsListPicker );
SaveCopyInUndoList( itemsListPicker, UR_UNSPECIFIED );
track->Draw( m_canvas, &dc, GR_XOR );
newtrack->Draw( m_canvas, &dc, GR_XOR );
// compute the new ratsnest, because connectivity could change
TestNetConnection( &dc, track->GetNetCode() );
}
break;
case ID_MENU_PCB_CLEAN:
Clean_Pcb();
break;
case ID_MENU_PCB_SWAP_LAYERS:
Swap_Layers( event );
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
{
wxConfigBase* cfg = Pgm().CommonSettings();
cfg->Read( wxT( "module_doc_file" ), g_DocModulesFileName );
GetAssociatedDocument( this, g_DocModulesFileName, &Kiface().KifaceSearch() );
}
break;
case ID_MENU_ARCHIVE_NEW_MODULES:
ArchiveModulesOnBoard( true );
break;
case ID_MENU_ARCHIVE_ALL_MODULES:
ArchiveModulesOnBoard( false );
break;
case ID_GEN_IMPORT_DXF_FILE:
InvokeDXFDialogImport( this );
m_canvas->Refresh();
break;
default:
wxString msg;
msg.Printf( wxT( "PCB_EDIT_FRAME::Process_Special_Functions() unknown event id %d" ),
id );
DisplayError( this, msg );
break;
}
m_canvas->CrossHairOn( &dc );
m_canvas->SetIgnoreMouseEvents( false );
}
bool FOOTPRINT_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotKey, const wxPoint& aPosition,
EDA_ITEM* aItem )
{
if( aHotKey == 0 )
return false;
bool blockActive = GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE;
BOARD_ITEM* item = GetCurItem();
bool ItemFree = (item == 0) || (item->GetFlags() == 0);
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
/* Convert lower to upper case (the usual toupper function has problem with non ascii
* codes like function keys */
if( (aHotKey >= 'a') && (aHotKey <= 'z') )
aHotKey += 'A' - 'a';
EDA_HOTKEY* HK_Descr = GetDescriptorFromHotkey( aHotKey, common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotKey, module_edit_Hotkey_List );
if( HK_Descr == NULL )
return false;
switch( HK_Descr->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return false;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Module_Editor_Hokeys_Descr );
break;
case HK_RESET_LOCAL_COORD: // set local (relative) coordinate origin
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_SET_GRID_ORIGIN:
SetGridOrigin( GetCrossHairPosition() );
m_canvas->Refresh();
break;
case HK_RESET_GRID_ORIGIN:
SetGridOrigin( wxPoint(0,0) );
m_canvas->Refresh();
break;
case HK_SWITCH_UNITS:
cmd.SetId( (g_UserUnit == INCHES) ?
ID_TB_OPTIONS_SELECT_UNIT_MM : ID_TB_OPTIONS_SELECT_UNIT_INCH );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_IN:
cmd.SetId( ID_POPUP_ZOOM_IN );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_OUT:
cmd.SetId( ID_POPUP_ZOOM_OUT );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_REDRAW:
cmd.SetId( ID_ZOOM_REDRAW );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_CENTER:
cmd.SetId( ID_POPUP_ZOOM_CENTER );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_UNDO:
case HK_REDO:
if( ItemFree && !blockActive )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED, HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_ZOOM_AUTO:
cmd.SetId( ID_ZOOM_PAGE );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_EDIT_ITEM:
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
case HK_DELETE:
OnHotkeyDeleteItem( HK_DELETE );
break;
case HK_MOVE_ITEM:
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_ROTATE_ITEM:
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
}
return true;
}
BOARD_ITEM* PCB_BASE_FRAME::PcbGeneralLocateAndDisplay( int aHotKeyCode )
{
BOARD_ITEM* item;
GENERAL_COLLECTORS_GUIDE guide = GetCollectorsGuide();
// Assign to scanList the proper item types desired based on tool type
// or hotkey that is in play.
const KICAD_T* scanList = NULL;
if( aHotKeyCode )
{
// @todo: add switch here and add calls to PcbGeneralLocateAndDisplay( int aHotKeyCode )
// when searching is needed from a hotkey handler
}
else if( GetToolId() == ID_NO_TOOL_SELECTED )
{
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
scanList = GENERAL_COLLECTOR::ModuleItems;
else
scanList = (DisplayOpt.DisplayZonesMode == 0) ?
GENERAL_COLLECTOR::AllBoardItems :
GENERAL_COLLECTOR::AllButZones;
}
else
{
switch( GetToolId() )
{
case ID_PCB_SHOW_1_RATSNEST_BUTT:
scanList = GENERAL_COLLECTOR::PadsOrModules;
break;
case ID_TRACK_BUTT:
scanList = GENERAL_COLLECTOR::Tracks;
break;
case ID_PCB_MODULE_BUTT:
scanList = GENERAL_COLLECTOR::ModuleItems;
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
scanList = GENERAL_COLLECTOR::Zones;
break;
default:
scanList = DisplayOpt.DisplayZonesMode == 0 ?
GENERAL_COLLECTOR::AllBoardItems :
GENERAL_COLLECTOR::AllButZones;
}
}
m_Collector->Collect( m_Pcb, scanList, RefPos( true ), guide );
#if 0
// debugging: print out the collected items, showing their priority order too.
for( int i = 0; i<m_Collector->GetCount(); ++i )
(*m_Collector)[i]->Show( 0, std::cout );
#endif
/* Remove redundancies: sometime, legacy zones are found twice,
* because zones can be filled by overlapping segments (this is a fill option)
* Trigger the selection of the current edge for new-style zones
*/
time_t timestampzone = 0;
for( int ii = 0; ii < m_Collector->GetCount(); ii++ )
{
item = (*m_Collector)[ii];
switch( item->Type() )
{
case PCB_ZONE_T:
// Found a TYPE ZONE
if( item->GetTimeStamp() == timestampzone ) // Remove it, redundant, zone already found
{
m_Collector->Remove( ii );
ii--;
}
else
{
timestampzone = item->GetTimeStamp();
}
break;
case PCB_ZONE_AREA_T:
{
/* We need to do the selection now because the menu text
* depends on it */
ZONE_CONTAINER *zone = static_cast<ZONE_CONTAINER*>( item );
zone->SetSelectedCorner( RefPos( true ) );
}
break;
default:
break;
}
}
if( m_Collector->GetCount() <= 1 )
{
item = (*m_Collector)[0];
SetCurItem( item );
}
// If the count is 2, and first item is a pad or module text, and the 2nd item is its
// parent module:
else if( m_Collector->GetCount() == 2
&& ( (*m_Collector)[0]->Type() == PCB_PAD_T || (*m_Collector)[0]->Type() ==
PCB_MODULE_TEXT_T )
&& (*m_Collector)[1]->Type() == PCB_MODULE_T && (*m_Collector)[0]->GetParent()==
(*m_Collector)[1] )
{
item = (*m_Collector)[0];
SetCurItem( item );
}
// if all are modules, find the smallest one among the primary choices
else if( ( item = AllAreModulesAndReturnSmallestIfSo( m_Collector ) ) != NULL )
{
SetCurItem( item );
}
else // we can't figure out which item user wants, do popup menu so user can choose
{
wxMenu itemMenu;
// Give a title to the selection menu. This is also a cancel menu item
wxMenuItem * item_title = new wxMenuItem( &itemMenu, -1, _( "Selection Clarification" ) );
#ifdef __WINDOWS__
wxFont bold_font( *wxNORMAL_FONT );
bold_font.SetWeight( wxFONTWEIGHT_BOLD );
bold_font.SetStyle( wxFONTSTYLE_ITALIC );
item_title->SetFont( bold_font );
#endif
itemMenu.Append( item_title );
itemMenu.AppendSeparator();
int limit = std::min( MAX_ITEMS_IN_PICKER, m_Collector->GetCount() );
for( int i = 0; i<limit; ++i )
{
wxString text;
item = (*m_Collector)[i];
text = item->GetSelectMenuText();
BITMAP_DEF xpm = item->GetMenuImage();
AddMenuItem( &itemMenu, ID_POPUP_PCB_ITEM_SELECTION_START + i, text, KiBitmap( xpm ) );
}
/* @todo: rather than assignment to true, these should be increment and decrement
* operators throughout _everywhere_.
* That way we can handle nesting.
* But I tried that and found there cases where the assignment to true (converted to
* a m_IgnoreMouseEvents++ )
* was not balanced with the -- (now m_IgnoreMouseEvents=false), so I had to revert.
* Somebody should track down these and make them balanced.
* m_canvas->SetIgnoreMouseEvents( true );
*/
// this menu's handler is void PCB_BASE_FRAME::ProcessItemSelection()
// and it calls SetCurItem() which in turn calls DisplayInfo() on the item.
m_canvas->SetAbortRequest( true ); // changed in false if an item is selected
PopupMenu( &itemMenu );
m_canvas->MoveCursorToCrossHair();
// The function ProcessItemSelection() has set the current item, return it.
if( m_canvas->GetAbortRequest() ) // Nothing selected
item = NULL;
else
item = GetCurItem();
}
return item;
}
BOARD_ITEM* FOOTPRINT_EDIT_FRAME::ModeditLocateAndDisplay( int aHotKeyCode )
{
BOARD_ITEM* item = GetCurItem();
if( GetBoard()->m_Modules == NULL )
return NULL;
GENERAL_COLLECTORS_GUIDE guide = GetCollectorsGuide();
// Assign to scanList the proper item types desired based on tool type
// or hotkey that is in play.
const KICAD_T* scanList = NULL;
if( aHotKeyCode )
{
// @todo: add switch here and add calls to PcbGeneralLocateAndDisplay(
// int aHotKeyCode ) when searching is needed from a hotkey handler
}
else
{
scanList = GENERAL_COLLECTOR::ModulesAndTheirItems;
}
m_Collector->Collect( GetBoard(), scanList, RefPos( true ), guide );
// Remove redundancies: when an item is found, we can remove the module from list
if( m_Collector->GetCount() > 1 )
{
for( int ii = 0; ii < m_Collector->GetCount(); ii++ )
{
item = (*m_Collector)[ii];
if( item->Type() != PCB_MODULE_T )
continue;
m_Collector->Remove( ii );
ii--;
}
}
if( m_Collector->GetCount() <= 1 )
{
item = (*m_Collector)[0];
SetCurItem( item );
}
else // we can't figure out which item user wants, do popup menu so user can choose
{
wxMenu itemMenu;
// Give a title to the selection menu. It also allow to close the popup menu without any action
wxMenuItem* item_title = new wxMenuItem( &itemMenu, wxID_NONE, _( "Selection Clarification" ) );
#ifdef __WINDOWS__
wxFont bold_font( *wxNORMAL_FONT );
bold_font.SetWeight( wxFONTWEIGHT_BOLD );
bold_font.SetStyle( wxFONTSTYLE_ITALIC );
item_title->SetFont( bold_font );
#endif
itemMenu.Append( item_title );
itemMenu.AppendSeparator();
int limit = std::min( MAX_ITEMS_IN_PICKER, m_Collector->GetCount() );
for( int ii = 0; ii<limit; ++ii )
{
item = (*m_Collector)[ii];
wxString text = item->GetSelectMenuText();
BITMAP_DEF xpm = item->GetMenuImage();
AddMenuItem( &itemMenu,
ID_POPUP_PCB_ITEM_SELECTION_START + ii,
text,
KiBitmap( xpm ) );
}
// this menu's handler is void
// PCB_BASE_FRAME::ProcessItemSelection()
// and it calls SetCurItem() which in turn calls DisplayInfo() on the
// item.
m_canvas->SetAbortRequest( true ); // changed in false if an item
PopupMenu( &itemMenu ); // m_AbortRequest = false if an item is selected
m_canvas->MoveCursorToCrossHair();
m_canvas->SetIgnoreMouseEvents( false );
// The function ProcessItemSelection() has set the current item, return it.
item = GetCurItem();
}
if( item )
{
SetMsgPanel( item );
}
return item;
}
