/**
* @brief Wraps up transmission in non blocking mode.
* @param hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
* the configuration information for the specified SMARTCARD module.
* @retval HAL status
*/
static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
{
/* Disable the SMARTCARD Transmit Complete Interrupt */
__HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TC);
/* Check if a receive process is ongoing or not */
if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
{
hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
}
else
{
/* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
__HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
/* Disable the SMARTCARD Parity Error Interrupt */
__HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_PE);
hsmartcard->State = HAL_SMARTCARD_STATE_READY;
}
HAL_SMARTCARD_TxCpltCallback(hsmartcard);
return HAL_OK;
}
/**
* @brief Send an amount of data in non blocking mode
* @param hsc: SMARTCARD handle.
* Function called under interruption only, once
* interruptions have been enabled by HAL_SMARTCARD_Transmit_IT()
* @retval HAL status
*/
static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc)
{
if(hsc->gState == HAL_SMARTCARD_STATE_BUSY_TX)
{
if(hsc->TxXferCount == 0)
{
/* Disable the SMARTCARD Transmit Complete Interrupt */
CLEAR_BIT(hsc->Instance->CR1, USART_CR1_TXEIE);
/* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
/* Tx process is ended, restore hsmartcard->gState to Ready */
hsc->gState = HAL_SMARTCARD_STATE_READY;
}
HAL_SMARTCARD_TxCpltCallback(hsc);
return HAL_OK;
}
else
{
hsc->Instance->TDR = (*hsc->pTxBuffPtr++ & (uint8_t)0xFFU);
hsc->TxXferCount--;
return HAL_OK;
}
}
/**
* @brief DMA SMARTCARD transmit process complete callback.
* @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA module.
* @retval None
*/
static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
{
SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
hsc->TxXferCount = 0;
/* Disable the DMA transfer for transmit request by setting the DMAT bit
in the SMARTCARD CR3 register */
CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAT);
/* Wait for SMARTCARD TC Flag */
if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, SMARTCARD_TIMEOUT_VALUE) != HAL_OK)
{
/* Timeout occurred */
hsc->State = HAL_SMARTCARD_STATE_TIMEOUT;
HAL_SMARTCARD_ErrorCallback(hsc);
}
else
{
/* No Timeout */
/* Check if a non-blocking receive process is ongoing or not */
if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
{
hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
}
else
{
hsc->State = HAL_SMARTCARD_STATE_READY;
}
HAL_SMARTCARD_TxCpltCallback(hsc);
}
}
/**
* @brief Send an amount of data in non blocking mode
* @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
* the configuration information for SMARTCARD module.
* @retval HAL status
*/
static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc)
{
uint16_t* tmp;
uint32_t tmp1 = 0;
tmp1 = hsc->State;
if((tmp1 == HAL_SMARTCARD_STATE_BUSY_TX) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX_RX))
{
if(hsc->Init.WordLength == SMARTCARD_WORDLENGTH_9B)
{
tmp = (uint16_t*) hsc->pTxBuffPtr;
hsc->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
if(hsc->Init.Parity == SMARTCARD_PARITY_NONE)
{
hsc->pTxBuffPtr += 2;
}
else
{
hsc->pTxBuffPtr += 1;
}
}
else
{
hsc->Instance->DR = (uint8_t)(*hsc->pTxBuffPtr++ & (uint8_t)0x00FF);
}
if(--hsc->TxXferCount == 0)
{
/* Disable the SMARTCARD Transmit Complete Interrupt */
__SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TC);
/* Disable the SMARTCARD Parity Error Interrupt */
__SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_PE);
/* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
__SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
/* Check if a non-blocking receive process is ongoing or not */
if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
{
hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
}
else
{
hsc->State = HAL_SMARTCARD_STATE_READY;
}
HAL_SMARTCARD_TxCpltCallback(hsc);
return HAL_OK;
}
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
/**
* @brief Wraps up transmission in non blocking mode.
* @param hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
* the configuration information for the specified SMARTCARD module.
* @retval HAL status
*/
static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
{
/* Disable the SMARTCARD Transmit Complete Interrupt */
__HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TC);
/* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
__HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
/* Tx process is ended, restore hsmartcard->gState to Ready */
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
HAL_SMARTCARD_TxCpltCallback(hsmartcard);
return HAL_OK;
}
/**
* @brief Wraps up transmission in non blocking mode.
* @param hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
* the configuration information for the specified SMARTCARD module.
* @retval HAL status
*/
static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
{
/* Disable the SMARTCARD Transmit Complete Interrupt */
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TCIE);
/* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
/* Tx process is ended, restore hsmartcard->gState to Ready */
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
HAL_SMARTCARD_TxCpltCallback(hsmartcard);
return HAL_OK;
}
/**
* @brief Send an amount of data in non blocking mode
* @param hsc: SMARTCARD handle.
* Function called under interruption only, once
* interruptions have been enabled by HAL_SMARTCARD_Transmit_IT()
* @retval HAL status
*/
static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc)
{
if((hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) || (hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX))
{
if(hsc->TxXferCount == 0)
{
/* Disable the SMARTCARD Transmit Complete Interrupt */
__HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TC);
/* Check if a receive Process is ongoing or not */
if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
{
hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
}
else
{
/* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
__HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
hsc->State = HAL_SMARTCARD_STATE_READY;
}
HAL_SMARTCARD_TxCpltCallback(hsc);
return HAL_OK;
}
else
{
hsc->Instance->TDR = (*hsc->pTxBuffPtr++ & (uint8_t)0xFF);
hsc->TxXferCount--;
return HAL_OK;
}
}
else
{
return HAL_BUSY;
}
}
/**
* @brief SMARTCARD interrupt requests handling.
* @param hsc: SMARTCARD handle
* @retval None
*/
void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc)
{
uint32_t isrflags = READ_REG(hsc->Instance->ISR);
uint32_t cr1its = READ_REG(hsc->Instance->CR1);
uint32_t cr3its = READ_REG(hsc->Instance->CR3);
uint32_t dmarequest = 0x00U;
uint32_t errorflags = 0x00U;
/* If no error occurs */
errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE));
if(errorflags == RESET)
{
/* SMARTCARD in mode Receiver -------------------------------------------------*/
if(((isrflags & USART_ISR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
{
SMARTCARD_Receive_IT(hsc);
return;
}
}
/* If some errors occur */
if((errorflags != RESET) && ((cr3its & (USART_CR3_EIE | USART_CR1_PEIE)) != RESET))
{
/* SMARTCARD parity error interrupt occurred ---------------------------*/
if(((isrflags & SMARTCARD_FLAG_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
{
hsc->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
}
/* SMARTCARD frame error interrupt occurred ----------------------------*/
if(((isrflags & SMARTCARD_FLAG_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
{
hsc->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
}
/* SMARTCARD noise error interrupt occurred ----------------------------*/
if(((isrflags & SMARTCARD_FLAG_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
{
hsc->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
}
/* SMARTCARD Over-Run interrupt occurred -------------------------------*/
if(((isrflags & SMARTCARD_FLAG_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
{
hsc->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
}
/* Call the Error call Back in case of Errors */
if(hsc->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
{
/* SMARTCARD in mode Receiver -----------------------------------------------*/
if(((isrflags & USART_ISR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
{
SMARTCARD_Receive_IT(hsc);
}
/* If Overrun error occurs, or if any error occurs in DMA mode reception,
consider error as blocking */
dmarequest = HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAR);
if(((hsc->ErrorCode & HAL_SMARTCARD_ERROR_ORE) != RESET) || dmarequest)
{
/* Blocking error : transfer is aborted
Set the SMARTCARD state ready to be able to start again the process,
Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
SMARTCARD_EndRxTransfer(hsc);
/* Disable the SMARTCARD DMA Rx request if enabled */
if (HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAR))
{
CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAR);
/* Abort the SMARTCARD DMA Rx channel */
if(hsc->hdmarx != NULL)
{
/* Set the SMARTCARD DMA Abort callback :
will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */
hsc->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError;
if(HAL_DMA_Abort_IT(hsc->hdmarx) != HAL_OK)
{
/* Call Directly XferAbortCallback function in case of error */
hsc->hdmarx->XferAbortCallback(hsc->hdmarx);
}
}
else
{
/* Call user error callback */
HAL_SMARTCARD_ErrorCallback(hsc);
}
}
else
{
/* Call user error callback */
HAL_SMARTCARD_ErrorCallback(hsc);
}
}
else
{
/* Call user error callback */
HAL_SMARTCARD_ErrorCallback(hsc);
hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
}
}
return;
} /* End if some error occurs */
/* SMARTCARD in mode Transmitter -------------------------------------------*/
if(((isrflags & SMARTCARD_FLAG_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
{
SMARTCARD_Transmit_IT(hsc);
return;
}
/* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
if(((isrflags & SMARTCARD_FLAG_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
{
/* Disable the SMARTCARD Transmit Complete Interrupt */
CLEAR_BIT(hsc->Instance->CR1, USART_CR1_TCIE);
/* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
/* Tx process is ended, restore hsmartcard->gState to Ready */
hsc->gState = HAL_SMARTCARD_STATE_READY;
HAL_SMARTCARD_TxCpltCallback(hsc);
return;
}
}
