/**************************************************************************************************
* @fn Hal_DriverInit
*
* @brief Initialize HW - These need to be initialized before anyone.
*
* @param task_id - Hal TaskId
*
* @return None
**************************************************************************************************/
void HalDriverInit (void)
{
/* VDDMON */
#if (defined HAL_VDDMON) && (HAL_VDDMON == TRUE)
HalVddMonInit();
#endif
/* ADC */
#if (defined HAL_ADC) && (HAL_ADC == TRUE)
HalAdcInit();
#endif
/* DMA */
#if (defined HAL_DMA) && (HAL_DMA == TRUE)
// Must be called before the init call to any module that uses DMA.
HalDmaInit();
#endif
/* AES */
#if (defined HAL_AES) && (HAL_AES == TRUE)
HalAesInit();
#endif
/* LCD */
#if (defined HAL_LCD) && (HAL_LCD == TRUE)
HalLcdInit();
#endif
/* LED */
#if (defined HAL_LED) && (HAL_LED == TRUE)
HalLedInit();
#endif
/* UART */
#if (defined HAL_UART) && (HAL_UART == TRUE)
HalUARTInit();
#endif
/* KEY */
#if (defined HAL_KEY) && (HAL_KEY == TRUE)
HalKeyInit();
#endif
/* SPI */
#if (defined HAL_SPI) && (HAL_SPI == TRUE)
HalSpiInit();
#endif
/* Buzzer */
#if (defined HAL_BUZZER) && (HAL_BUZZER == TRUE)
HalBuzzerInit();
#endif
/* GPIO Debug */
#if (defined HAL_GPIO_DBG) && (HAL_GPIO_DBG == TRUE)
HalGpioDbgInit();
#endif
}
/**************************************************************************************************
* @fn Hal_DriverInit
*
* @brief Initialize HW - These need to be initialized before anyone.
*
* @param task_id - Hal TaskId
*
* @return None
**************************************************************************************************/
void HalDriverInit (void)
{
/* TIMER */
#if (defined HAL_TIMER) && (HAL_TIMER == TRUE)
#error "The hal timer driver module is removed."
#endif
/* ADC */
#if (defined HAL_ADC) && (HAL_ADC == TRUE)
HalAdcInit();
#endif
/* DMA */
#if (defined HAL_DMA) && (HAL_DMA == TRUE)
// Must be called before the init call to any module that uses DMA.
HalDmaInit();
#endif
/* AES */
#if (defined HAL_AES) && (HAL_AES == TRUE)
HalAesInit();
#endif
/* LCD */
#if (defined HAL_LCD) && (HAL_LCD == TRUE)
HalLcdInit();
#endif
/* LED */
#if (defined HAL_LED) && (HAL_LED == TRUE)
HalLedInit();
#endif
/* UART */
#if (defined HAL_UART) && (HAL_UART == TRUE)
HalUARTInit();
#endif
/* KEY */
#if (defined HAL_KEY) && (HAL_KEY == TRUE)
HalKeyInit();
#endif
/* SPI */
#if (defined HAL_SPI) && (HAL_SPI == TRUE)
HalSpiInit();
#endif
/* HID */
#if (defined HAL_HID) && (HAL_HID == TRUE)
usbHidInit();
#endif
}
/**************************************************************************************************
* @fn Hal_DriverInit (ªì©l¤ÆµwÅ骺ÅX°Êµ{§Ç, ¨Ï¥ÎªÌ¥i¦b¦¹¨ç¼Æ²K¥[¬ÛÃöµwÅé)
*
* @brief Initialize HW - These need to be initialized before anyone.
*
* @param task_id - Hal TaskId
*
* @return None
**************************************************************************************************/
void HalDriverInit (void)
{
/* TIMER */
#if (defined HAL_TIMER) && (HAL_TIMER == TRUE)
HalTimerInit();
#endif
/* ADC */
#if (defined HAL_ADC) && (HAL_ADC == TRUE)
HalAdcInit();
#if defined(M170)
M170_Init();
#endif
#endif
/* DMA */
#if (defined HAL_DMA) && (HAL_DMA == TRUE)
// Must be called before the init call to any module that uses DMA.
HalDmaInit();
#endif
/* Flash */
#if (defined HAL_FLASH) && (HAL_FLASH == TRUE)
// Must be called before the init call to any module that uses Flash access or NV.
HalFlashInit();
#endif
/* AES */
#if (defined HAL_AES) && (HAL_AES == TRUE)
HalAesInit();
#endif
/* LCD */
#if (defined HAL_LCD) && (HAL_LCD == TRUE)
HalLcdInit();
#endif
/* UART */
#if (defined HAL_UART) && (HAL_UART == TRUE)
HalUARTInit();
#endif
/* KEY */
#if (defined HAL_KEY) && (HAL_KEY == TRUE)
HalKeyInit();
#endif
/* SPI */
#if (defined HAL_SPI) && (HAL_SPI == TRUE)
HalSpiInit();
#endif
/* HID */
#if (defined HAL_HID) && (HAL_HID == TRUE)
usbHidInit();
#endif
/* KEYPAD */
#if (defined HAL_KEYPAD) && (HAL_KEYPAD == TRUE)
halKeypadInit();
#endif
/* BUZZER */
#if (defined HAL_BUZZER) && (HAL_BUZZER == TRUE)
halBuzzerInit();
#endif
/* I2C (M200 module) */
#if (defined HAL_I2C) && (HAL_I2C == TRUE)
#if defined(M200)
M200_Init();
#endif
#endif
/* LED */
#if (defined HAL_LED) && (HAL_LED == TRUE)
HalLedInit();
#endif
}