/**
* @brief This function used to read the saved IO status or register default IO settings
* @param None
* @return None
*/
void IO_status_init(void)
{
uint8_t i;
read_IOstorage(&IOdata, sizeof(IOdata));
// IO Status & Alias Initialization
// Initialize for WIZ550web Baseboard Configuration
if(!((IOdata.io_statuscode[0] == 0xAA) && (IOdata.io_statuscode[1] == 0x01)))
{
#ifdef _WEB_DEBUG_
printf("\r\nIO Status Detection code: [%.02x][%.02x]\r\n", IOdata.io_statuscode[0], IOdata.io_statuscode[1]);
#endif
// IO Status Detection code Initialize
IOdata.io_statuscode[0] = 0xAA;
IOdata.io_statuscode[1] = 0x01;
// IO Direction Initialize
IOdata.io[D0] = Output;
IOdata.io[D1] = Output;
IOdata.io[D2] = Output;
IOdata.io[D3] = Output;
IOdata.io[D4] = Output;
IOdata.io[D5] = Output;
IOdata.io[D6] = Output;
IOdata.io[D7] = Output;
IOdata.io[D8] = Input;
IOdata.io[D9] = Input;
IOdata.io[D10] = Input;
IOdata.io[D11] = Input;
IOdata.io[D12] = Input;
IOdata.io[D13] = Input;
IOdata.io[D14] = Input;
IOdata.io[D15] = Input;
// Each IO Status Initialize
for(i = 0; i < IOn; i++)
{
IOdata.ios[i] = Off;
}
// IO Alias fields Initialize
for(i = 0; i < IOn; i++)
{
memset(IOdata.io_alias[i], 0x00, 25);
sprintf((char *)IOdata.io_alias[i], "Digital IO #%d", i);
}
write_IOstorage(&IOdata, sizeof(IOdata));
#ifdef _WEB_DEBUG_
printf(">> Default IO Status / Alias Initialize Success\r\n\r\n");
#endif
}
#ifdef _WEB_DEBUG_
else
{
printf(">> IO Status / Alias Load Success\r\n\r\n");
}
#endif
GPIO_PinRemapConfig (GPIO_Remap_SWJ_Disable, ENABLE);
// IO Direction setting after load or set default
for(i = 0; i < IOn; i++)
{
if((IOdata.io[i] != NotUsed) && (IOdata.io[i] != 0xFF))
{
IO_Init(i);
}
}
// Each IO Status Initialize
for(i = 0; i < IOn; i++)
{
if(IOdata.io[i] == Output)
{
if(IOdata.ios[i] == Off) IO_Off(i);
else IO_On(i);
}
}
}
void factory_test_2nd (void)
{
int i;
//uint16 adc_val = 0;
int fail_count;
EXTI_InitTypeDef EXTI_InitStructure;
EXTI_InitStructure.EXTI_Line = EXTI_Line12 | EXTI_Line2 | EXTI_Line3 | EXTI_Line4;
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling;//EXTI_Trigger_Falling;
EXTI_InitStructure.EXTI_LineCmd = DISABLE;
EXTI_Init(&EXTI_InitStructure);
// check D0~D7(output/off) D8~15 input/off
if (teststep == 3)
{
//delay_ms(100);
fail_count = 0;
for(i = 0; i < IOn; i++)
{
if (get_IO_Status(i) == Off)
{
if(i < 8)
{
delay_ms(1);
//printf("########## D%d output/off OK.\r\n", i);
}
else
{
delay_ms(1);
//printf("########## D%d input/off OK.\r\n", i);
}
}
else
{
if(i < 8)
{
fail_count += 1;
printf("########## D%d output/off Fail.\r\n", i);
}
else
{
printf("########## D%d input/off Fail.\r\n", i);
fail_count += 1;
}
}
}
if(fail_count == 0)
{
printf("########## D0~D7[output/off] D8~D15[input/off] OK.\r\n");
}
teststep = 4;
}
// check D0~D7(output/on) D8~15 input/on
if (teststep == 4)
{
fail_count = 0;
for(i = 0; i < 8/*IOn*/; i++)
{
IOdata.ios[i] = On;
}
for(i = 0; i < 8/*IOn*/; i++)
{
if(IOdata.io[i] == Output)
{
if(IOdata.ios[i] == Off) IO_Off(i);
else IO_On(i);
}
}
for(i = 0; i < IOn; i++)
{
if (get_IO_Status(i) == On)
{
if(i < 8)
{
delay_ms(1);
//printf("########## D%d output/on OK.\r\n", i);
}
else
{
delay_ms(1);
//printf("########## D%d input/on OK.\r\n", i);
}
}
else
{
if(i < 8)
{
fail_count += 1;
printf("########## D%d output/on Fail.\r\n", i);
}
else
{
fail_count += 1;
printf("########## D%d input/on Fail.\r\n", i);
}
}
}
if(fail_count == 0)
{
printf("########## D0~D7[output/on] D8~D15[input/on] OK.\r\n");
}
teststep = 5;
}
// check A0~A3
if (teststep == 5)
{
fail_count = 0;
#if 0
for(i = 0; i < 4; i++)
{
adc_val = ADC_DualConvertedValueTab[i];
if (adc_val > 100) //TODO
{
delay_ms(1);
//printf("########## A%d[%d] OK.\r\n", i, adc_val);
}
else
{
fail_count += 1;
printf("########## A%d[%d] Fail.\r\n", i, adc_val);
}
}
#endif
if(fail_count == 0)
{
printf("########## A0 = %d || A1 = %d || A2 = %d || A3 = %d\r\n", ADC_DualConvertedValueTab[0]
, ADC_DualConvertedValueTab[1]
, ADC_DualConvertedValueTab[2]
, ADC_DualConvertedValueTab[3]);
}
teststep = 6;
}
printf("########## Test Completed.\r\n");
//check_factory_uart1();
}