void main(void){
//------------------------------------------------------------------------------
// Main Program
// This is the main routine for the program. Execution of code starts here.
// The operating system is Back Ground Fore Ground.
//
//------------------------------------------------------------------------------
Init_Ports(); // Initialize Ports
Init_Clocks(); // Initialize Clock System
Init_Conditions();
PJOUT |= LED1; // Turn LED 1 on to indicate boot
Time_Sequence = 0; //
Init_Timers(); // Initialize Timers
Init_LEDs(); // Initialize LEDs
//------------------------------------------------------------------------------
// Begining of the "While" Operating System
//------------------------------------------------------------------------------
while(ALWAYS) { // Can the Operating system run
switch(Time_Sequence){
case 250: // 1000 msec
if(one_time){
Init_LEDs(); // Initialize LEDs
one_time = 0;
}
Time_Sequence = 0; //
case 200: // 1000 msec
if(one_time){
PJOUT |= LED4; // Change State of LED 4
P3OUT |= LED5; // Change State of LED 5
one_time = 0;
}
case 150: // 750 msec
if(one_time){
PJOUT |= LED3; // Change State of LED 3
P3OUT |= LED6; // Change State of LED 6
one_time = 0;
}
case 100: // 500 msec
if(one_time){
PJOUT |= LED2; // Change State of LED 2
P3OUT |= LED7; // Change State of LED 7
one_time = 0;
}
case 50: // 250 msec
if(one_time){
PJOUT |= LED1; // Change State of LED 1
P3OUT |= LED8; // Change State of LED 8
one_time = 0;
}
break; //
default: break;
}
Switches_Process(); // Check for switch state change
if(Time_Sequence > 250){
Time_Sequence = 0;
}
}
//------------------------------------------------------------------------------
}
int main(void)
{
/* perform the needed initialization here */
Init_Leds();
Init_Teclas();
Init_Timers();
Setear_Tiempo(TIEMPO_T);
while(1)
{
auxiliar =Chequea_T();
switch(auxiliar)
{
case TEC1:
arciris = 1;
color=0;
break;
}
if (arciris)
{
Arcoiris();
}
}
return 1;
}
void Init_System(void)
{
Init_Buttons();
Init_Timers();
__enable_interrupt(); // enable global interrupts
}
void main(void)
{
Init_Ports(); // Initialize Ports
Init_Clocks(); // Initialize Clock System
Init_Conditions();
Init_Interrupts();
TimeMsec = RESET_TIME;
Init_Timers(); // Initialize Timers
Init_LCD(); // Initialize LCD
// "0123456789abcdef"
display_1 = " Homework 9 ";
display_2 = " ";
Display_Process();
/* ---------- Begining of the "While" Operating System ------------- */
while(ALWAYS) // Can the Operating system run
{
ADC_Process();
Control_Process();
Menu_Process();
if(TimeMsec % EVERY_50 == RESET_TIME)
{
Display_Process();
}
}
}
int main(void)
{
/* perform the needed initialization here */
Init_Leds();
while (!Init_Teclas(&pulsador[0],0,4,1,0,0));
/*
Ejemplo:
En EDU CIA el Pulsador 0, TEC 1 //
Se instanciaría de la siguiente forma:
tecla puls0;
Init_Teclas(&pulsador[0],0,4,1,0,0)
donde:
*puerto = 0; // GPIO port 0 -4
*pin_loc = 4;
*pin_group = 1; // Grupo 1 de pines (P1_0)
*pin_num = 0; //Pin 0
*func = 0; //Func0
*/
while (!Init_Teclas(&pulsador[1],0,8,1,1,0));
while (!Init_Teclas(&pulsador[2],0,9,1,2,0));
while (!Init_Teclas(&pulsador[3],1,9,1,6,0));
Init_Timers();
Setear_Tiempo(TIEMPO_T);
while(1)
{
}
return 1;
}
void main(void){
//==============================================================================
// Main Program
//
// Description: This function contains the while loop that runs continuously
// to act for the operating system. It also calls all the functions to
// initialize the system.
//
// Passed : no variables passed
// Locals: no variables declared
// Returned: no values returned
// Globals: volatile unsigned int Time_Sequence;
// volatile char one_time;
// char* display_1
// char* display_2
// char* display_3
// char* display_4
// slow_input_down
// control_state[CNTL_STATE_INDEX]
// char big
// char size_count;
// char posL1
// char posL2
// char posL3
// char posL4
//
// Author: David Pryor
// Date: Feb 2016
// Compiler: Built with IAR Embedded Workbench Version: V4.10A/W32 (6.4.1)
//==============================================================================
Init_Ports(); // Initialize Ports
Init_Clocks(); // Initialize Clock System
Init_Conditions();
Time_Sequence = SWITCH_OFF; //
Init_Timers(); // Initialize Timers
Init_LEDs(); // Initialize LEDs
Init_LCD(); // Initialize LCD
Init_ADC(); // Initialize ADC
//------------------------------------------------------------------------------
// Begining of the "While" Operating System
//------------------------------------------------------------------------------
while(ALWAYS) { // Can the Operating system run
Menu_Process();
ADC_Process(); // call sampling function
if(display_count >= FOR_FOURTH_SECOND){ // update screen every 250 msec
Display_Process();
display_count = SWITCH_OFF;
}
if(menu_items == FALSE){
display_4 = "SW2: Menu";
}
if(switch_two_pressed){
menu_items = TRUE;
switch_two_pressed = SWITCH_OFF;
}
}
//------------------------------------------------------------------------------
}
//--------------------------------------------------------------------------//
// Function: main //
//--------------------------------------------------------------------------//
void main(void)
{
Init_Flags();
Init_Timers();
Init_Interrupts();
while(1);
}
//--------------------------------------------------------------------------//
// Function: main //
//--------------------------------------------------------------------------//
int main(void)
{
Init_Flags();
Init_Timers();
Init_Interrupts();
while(1);
return 0;
}
void main(void)
{
// Hardware Initialization
TRISIO = 0xFF; // All IO are inputs to be safe
GPIO = 0x00; // All IO to 0
//ANSEL = 0x00; // Turn off ADC
CMCON = 7; // Turn off Comparators
Init_Timers(); // Initialize Timers (TMR0)
Init_IO(); // Initialize In-and-Outputs
while (On) // Infinite loop
{
CLRWDT();
}
}
void main(void)
{
Init_Ports(); // Initialize Ports
Init_Clocks(); // Initialize Clock System
Init_Conditions();
Init_Interrupts();
//PJOUT |= LED1; // Turn LED 1 on to indicate boot
TimeMsec = RESET_TIME;
Init_Timers(); // Initialize Timers
Init_LCD(); // Initialize LCD
//Init_LEDs(); // Initialize LEDs
// "0123456789abcdef"
display_1 = " PROJECT 5 ";
display_2 = " ";
Display_Process();
P1OUT |= IR_LED;
waitMsec(10);
/* ---------- Begining of the "While" Operating System ------------- */
while(ALWAYS) // Can the Operating system run
{
if(TimeMsec % EVERY_50 == RESET_TIME)
Display_Process(); //Refreshes screen every 50 'ticks'
if(TimeMsec % EVERY_2 == RESET_TIME)
{
Switches_Process(); // Poll for switch state change every other 'tick'
ADC_Process();
}
Motors_Process();
Control_Process();
}
}
int main() {
GPIO_InitTypeDef GPIO_InitDef;
SystemClock_Config();
SystemCoreClockUpdate();
HAL_Init();
/* driver init */
lsm303dlhc_init();
l3gd20_init();
osKernelInitialize();
Init_Timers();
handlerThread_id = osThreadCreate(osThread(handlerThread), NULL);
gyroHandlerThread_id = osThreadCreate(osThread(gyroHandlerThread), NULL);
visioThread_id = osThreadCreate(osThread(visioThread), NULL);
accelBuffer_mutex_id = osMutexCreate(osMutex(accelBuffer_mutex));
gyroBuffer_mutex_id = osMutexCreate(osMutex(gyroBuffer_mutex));
// enable clock for GPIOE
//__HAL_RCC_GPIOE_CLK_ENABLE();
// init GPIO pin
GPIO_InitDef.Pin = GPIO_PIN_9;
GPIO_InitDef.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitDef.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOE, &GPIO_InitDef);
// set LD3
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_9, GPIO_PIN_SET);
osKernelStart();
}
void main(void){
//==============================================================================
// Main Program
//
// Description: This function contains the while loop that runs continuously
// to act for the operating system. It also calls all the functions to
// initialize the system.
//
// Passed : no variables passed
// Locals: no variables declared
// Returned: no values returned
// Globals: volatile unsigned int Time_Sequence;
// volatile char one_time;
// char* display_1
// char* display_2
// char* display_3
// char* display_4
// slow_input_down
// control_state[CNTL_STATE_INDEX]
// char big
// char size_count;
// char posL1
// char posL2
// char posL3
// char posL4
//
// Author: David Pryor
// Date: Feb 2016
// Compiler: Built with IAR Embedded Workbench Version: V4.10A/W32 (6.4.1)
//==============================================================================
Init_Ports(); // Initialize Ports
Init_Clocks(); // Initialize Clock System
Init_Conditions();
Time_Sequence = SWITCH_OFF; //
Init_Timers(); // Initialize Timers
Init_LEDs(); // Initialize LEDs
Init_LCD(); // Initialize LCD
Init_ADC(); // Initialize ADC
Init_Serial_UCA1(0); // BAUD rate 9600
Init_Serial_UCA0(1); // BAUD rate 9600
Five_msec_Delay(1);
PJOUT |= IOT_STA_MINIAP; //turning on miniap (only works this way)
IR_LED_OFF();
lcd_BIG_mid();
display_1 = " David ";
display_2 = "Project 8";
display_3 = " Pryor ";
display_4 = "";
Display_Process();
//------------------------------------------------------------------------------
// Begining of the "While" Operating System
//------------------------------------------------------------------------------
while(ALWAYS) { // Can the Operating system run
ADC_Process(); // call sampling function
if(MainFG){
Menu_Process();
}
else if(BaudMenuFG==TRUE){
Baud_Menu();
}
else if(IOTMenuFG==TRUE){
IOT_Menu();
}
if(StartCommandFG){ //StartCommandFG is true once "." has been received
commandTree();
}
printMacAddress(); //prints mac address to screen
macFG=FALSE; //turn off command to print mac address
clearReceiveBuffer();
parseIOTData();
}
//------------------------------------------------------------------------------
}
void main(void){
//==============================================================================
// Main Program
//
// Description: This function contains the while loop that runs continuously
// to act for the operating system. It also calls all the functions to
// initialize the system.
//
// Passed : no variables passed
// Locals: no variables declared
// Returned: no values returned
// Globals: volatile unsigned int Time_Sequence;
// volatile char one_time;
// char* display_1
// char* display_2
// char* display_3
// char* display_4
// slow_input_down
// control_state[CNTL_STATE_INDEX]
// char big
// char size_count;
// char posL1
// char posL2
// char posL3
// char posL4
//
// Author: David Pryor
// Date: Feb 2016
// Compiler: Built with IAR Embedded Workbench Version: V4.10A/W32 (6.4.1)
//==============================================================================
Init_Ports(); // Initialize Ports
Init_Clocks(); // Initialize Clock System
Init_Conditions();
Time_Sequence = SWITCH_OFF; //
Init_Timers(); // Initialize Timers
five_msec_sleep(COUNT_TWOFIDDY_MSEC); // 250 msec delay for the clock to settle (50)
Init_LEDs(); // Initialize LEDs
Init_LCD(); // Initialize LCD
// 1234567890
display_1 = "NCSU";
posL1 = LINE_POS_3;
display_2 = "WOLFPACK";
posL2 = LINE_POS_1;
display_3 = "ECE306";
posL3 = LINE_POS_2;
display_4 = "D Pryor";
posL4 = LINE_POS_1;
big = SWITCH_OFF;
Display_Process();
//------------------------------------------------------------------------------
// Begining of the "While" Operating System
//------------------------------------------------------------------------------
while(ALWAYS) { // Can the Operating system run
switch(Time_Sequence){
case COUNT_TWELVEFIDDY_MSEC: // 1250 msec (250)
if(one_time){
Init_LEDs(); // Initialize LEDs
one_time = SWITCH_OFF;
}
Time_Sequence = SWITCH_OFF; //
case COUNT_ONETHOUSAND_MSEC: // 1000 msec (200)
if(one_time){
one_time = SWITCH_OFF;
}
case COUNT_SEVENFIDDY_MSEC: // 750 msec (150)
if(one_time){
one_time = SWITCH_OFF;
}
case COUNT_FIVEHUNNED_MSEC: // 500 msec (100)
if(one_time){
one_time = SWITCH_OFF;
}
case COUNT_TWOFIDDY_MSEC: // 250 msec (50)
if(one_time){
one_time = SWITCH_OFF;
}
size_count++;
if(size_count > MAX_SIZE_COUNT){
size_count = SWITCH_OFF;
if(big){
//lcd_BIG_mid();
big = SWITCH_OFF;
}else{
//lcd_4line();
big = SWITCH_ON;
}
}
Display_Process();
break; //
default: break;
}
Switches_Process(); // Check for switch state change
if(Time_Sequence > COUNT_TWELVEFIDDY_MSEC){
Time_Sequence = SWITCH_OFF;
}
}
//------------------------------------------------------------------------------
}
void main(void)
{
/********************************************************************/
// System Initialization
/********************************************************************/
// Initialize MEGA8 PORT
Init_PORT();
// Initialize SPI to communicate with CH453
CH453_I2C_Init();
// Initialize Global Variable:
// "Init_Vars()" has to be placed after "bReadDataFromEeprom()" because
Init_Vars();
// Initialize UART, 8 data, 1 stop, no parity. Boardrate is 2400.
UART_Init();
// Timer (Interrupt) initialization
safesys();
digi_cprint("88888888",0,8);
init_digi_Led();
Init_Timers();
// initialize golbal interrupt.
#asm("sei")
//init the DMM
nav_command(NAV_INIT);
sleepms(200*ONEMS);
navto1v();
nav_command(NAV_SLOWMODE);
sleepms(200*ONEMS);
nav_command(NAV_AFLTON);
sleepms(200*ONEMS);
update_led(0);
sysdata.R0 = 0;
while(1)
{
if(keycode != KEY_INVALID)
{
HandleKey(keycode);
keycode = KEY_INVALID;
continue;
}
if(dlg_cnt > 1)
{
dlg_cnt--;
continue;
}
timer_tick();
if(IS_THERM_MODE)
{
if(therm_state() == 0)
continue;
}
if(IS_BORE_MODE)
{
if(bore_state() == 0)
continue;
}
//shift to next channel
if(sysdata.chan == CHAN_1)
ch_to_search = 0;
else if(sysdata.chan == CHAN_2)
ch_to_search = 1;
else
ch_to_search = 1 - ch_to_search&0x01;
}
}
/**
* @details Where all the magic happens
* @return Shouldn't return
*/
int main(void) {
Init_Core();
Init_SM();
Init_Board();
Init_Globals();
Init_CAN();
Init_Timers();
// ------------------------------------------------
// Begin
DEBUG_Print("Started Up\r\n");
while(1) {
uint8_t count;
if ((count = Chip_UART_Read(LPC_USART, Rx_Buf, UART_RX_BUF_SIZE)) != 0) {
switch (Rx_Buf[0]) {
case 'a': // Print out Brusa Mains Info
DEBUG_Print("Actual Mains Voltage: ");
itoa(brusa_actual_1.mains_mVolts, str, 10);
DEBUG_Print(str);
DEBUG_Print("\r\n");
DEBUG_Print("Mains type: ");
itoa(brusa_actual_1.mains_cAmps, str, 10);
DEBUG_Print(str);
DEBUG_Print("\r\n");
DEBUG_Print("Temp: ");
itoa((brusa_temp.power_temp / 10) - 40 , str, 10);
DEBUG_Print(str);
DEBUG_Print("\r\n");
DEBUG_Print("Temp: 0x");
itoa(brusa_temp.power_temp , str, 16);
DEBUG_Print(str);
DEBUG_Print("\r\n");
break;
case 'b': // Print out Actual Brusa Output
DEBUG_Print("Actual Out Voltage: ");
itoa(brusa_actual_1.output_mVolts, str, 10);
DEBUG_Println(str);
DEBUG_Print("Actual Out Current: ");
itoa(brusa_actual_1.output_cAmps, str, 10);
DEBUG_Println(str);
break;
case 'f': // Print out Pack State
itoa(pack_state.pack_min_mVolts, str, 10);
DEBUG_Print("Pack Min Voltage: ");
DEBUG_Print(str);
DEBUG_Print("\r\n");
itoa(pack_state.pack_max_mVolts, str, 10);
DEBUG_Print("Pack Max Voltage: ");
DEBUG_Print(str);
DEBUG_Print("\r\n");
break;
case 'y': // Print out Module Balance State
itoa(PackManager_GetExtModId(0), str, 16);
DEBUG_Print("Mod 0x");
DEBUG_Print(str);
itoa(PackManager_GetExtBal(0), str, 2);
DEBUG_Print(": 0b");
DEBUG_Println(str);
itoa(PackManager_GetExtModId(1), str, 16);
DEBUG_Print("Mod 0x");
DEBUG_Print(str);
itoa(PackManager_GetExtBal(1), str, 2);
DEBUG_Print(": 0b");
DEBUG_Println(str);
break;
case 'e':
itoa(brusa_error,str, 2);
DEBUG_Println(str);
break;
case 'm': // Print out charge mode and brusa error
DEBUG_Print("Charge Mode: ");
itoa(Charge_GetMode(), str, 10);
DEBUG_Println(str);
DEBUG_Print("Error Messages: ");
itoa((uint64_t)brusa_error, str, 2);
DEBUG_Println(str);
break;
default:
DEBUG_Print("Unknown Command\r\n");
}
}
//-----------------------------
// Detect Input Changes (Default to IDLE)
MODE_INPUT_T inp = INP_IDLE;
if (!Board_Switch_Read()) {
inp = INP_CHRG;
} else {
inp = INP_IDLE;
}
//-----------------------------
// Update pack_state
pack_state.contactors_closed = Board_Contactors_Closed();
pack_state.msTicks = msTicks;
pack_state.brusa_error = brusa_error;
pack_state.pack_cAmps_in = brusa_actual_1.output_cAmps;
//-----------------------------
// SSM Step
ERROR_T result = SSM_Step(&pack_state, inp, &out_state);
if (result != ERROR_NONE) {
_error(result, true, false);
}
//-----------------------------
// Check if SSM has Changed State
// Currently only changes Poll Frequency
// [TODO] Set a status LED!!
if (SSM_GetMode() != mode) {
mode = SSM_GetMode();
switch (SSM_GetMode()) {
case IDLE:
Chip_TIMER_SetMatch(LPC_TIMER32_1, 0, Hertz2Ticks(BCM_POLL_IDLE_FREQ));
Chip_TIMER_Reset(LPC_TIMER32_1); // Otherwise shit gets F****D
break;
case CHARGING:
Chip_TIMER_SetMatch(LPC_TIMER32_1, 0, Hertz2Ticks(BCM_POLL_CHARGING_FREQ));
Chip_TIMER_Reset(LPC_TIMER32_1);
break;
case DRAINING:
Chip_TIMER_SetMatch(LPC_TIMER32_1, 0, Hertz2Ticks(BCM_POLL_DRAINING_FREQ));
Chip_TIMER_Reset(LPC_TIMER32_1);
break;
}
}
//-----------------------------
// Carry out out_state
if (out_state.close_contactors && !Board_Contactors_Closed()) {
Board_Close_Contactors(true);
} else if (!out_state.close_contactors && Board_Contactors_Closed()) {
Board_Close_Contactors(false);
}
if (out_state.brusa_output) {
brusa_control.clear_error = out_state.brusa_clear_latch;
brusa_control.output_mVolts = out_state.brusa_mVolts;
brusa_control.output_cAmps = out_state.brusa_cAmps;
Chip_TIMER_Enable(LPC_TIMER32_0);
} else {
brusa_control.output_mVolts = 0;
brusa_control.output_cAmps = 0;
Chip_TIMER_Disable(LPC_TIMER32_0);
}
//-----------------------------
// Retrieve available brusa messages
int8_t tmp = MCP2515_GetFullReceiveBuffer();
int8_t res = 0;
if (tmp == 2) {
MCP2515_ReadBuffer(&mcp_msg_obj, 0);
res = Brusa_Decode(&brusa_messages, &mcp_msg_obj);
if (res == -1) {
DEBUG_Println("Brusa Decode Error");
res = 0;
}
MCP2515_ReadBuffer(&mcp_msg_obj, 1);
res = Brusa_Decode(&brusa_messages, &mcp_msg_obj);
} else if (tmp == 0) { // Receive Buffer 0 Full
MCP2515_ReadBuffer(&mcp_msg_obj, tmp);
res = Brusa_Decode(&brusa_messages, &mcp_msg_obj);
} else if (tmp == 1) { //Receive buffer 1 full
MCP2515_ReadBuffer(&mcp_msg_obj, tmp);
res = Brusa_Decode(&brusa_messages, &mcp_msg_obj);
}
if (res == -1) {
DEBUG_Println("Brusa Decode Error");
res = 0;
}
//-----------------------------
// Send brusa message if its time
if (brusa_message_send) {
brusa_message_send = false;
Brusa_MakeCTL(&brusa_control, &mcp_msg_obj);
MCP2515_LoadBuffer(0, &mcp_msg_obj);
MCP2515_SendBuffer(0);
}
//-----------------------------
// Check for and decode A123 Messages
if (!RingBuffer_IsEmpty(&rx_buffer)) {
CCAN_MSG_OBJ_T temp_msg;
RingBuffer_Pop(&rx_buffer, &temp_msg);
res = PackManager_Update(&temp_msg);
if (new_std_msg_sent) {
PackManager_Commit(&pack_state);
new_std_msg_sent = false;
}
}
if (res == -1) {
DEBUG_Println("A123 Decode Error");
}
//-----------------------------
// Timed output
if (msTicks - last_debug_message > TIMED_MESSAGE_DELAY) {
message_count++;
last_debug_message = msTicks;
switch (message_count % 7) {
case 0:
if (out_state.balance) {
itoa(mbb_cmd.balance_target_mVolts, str, 10);
DEBUG_Print("Balancing to: ");
DEBUG_Println(str);
} else {
DEBUG_Println("Not balancing");
}
break;
case 1:
itoa(brusa_control.output_mVolts, str, 10);
DEBUG_Print("Brusa out V: ");
DEBUG_Println(str);
break;
case 2:
itoa(brusa_control.output_cAmps, str, 10);
DEBUG_Print("Brusa out C: ");
DEBUG_Println(str);
break;
case 3:
DEBUG_Print("Actual Out Voltage: ");
itoa(brusa_actual_1.output_mVolts, str, 10);
DEBUG_Println(str);
break;
case 4:
DEBUG_Print("Actual Out Current: ");
itoa(brusa_actual_1.output_cAmps, str, 10);
DEBUG_Println(str);
break;
case 5:
DEBUG_Print("Mode: ");
DEBUG_Println((SSM_GetMode() == CHARGING) ? "Chrg":"Idle");
break;
case 6:
DEBUG_Print("Brusa Output: ");
itoa(out_state.brusa_output, str, 2);
DEBUG_Println(str);
DEBUG_Print("\r\n");
break;
}
}
}
return 0;
}
void main(void){
//==============================================================================
// Main Program
//
// Description: This function contains the while loop that runs continuously
// to act for the operating system. It also calls all the functions to
// initialize the system.
//
// Passed : no variables passed
// Locals: no variables declared
// Returned: no values returned
// Globals: volatile unsigned int Time_Sequence;
// volatile char one_time;
// char* display_1
// char* display_2
// char* display_3
// char* display_4
// slow_input_down
// control_state[CNTL_STATE_INDEX]
// char big
// char size_count;
// char posL1
// char posL2
// char posL3
// char posL4
//
// Author: David Pryor
// Date: Feb 2016
// Compiler: Built with IAR Embedded Workbench Version: V4.10A/W32 (6.4.1)
//==============================================================================
Init_Ports(); // Initialize Ports
Init_Clocks(); // Initialize Clock System
Init_Conditions();
Time_Sequence = SWITCH_OFF; //
Init_Timers(); // Initialize Timers
Init_LEDs(); // Initialize LEDs
Init_LCD(); // Initialize LCD
//------------------------------------------------------------------------------
// Begining of the "While" Operating System
//------------------------------------------------------------------------------
while(ALWAYS) { // Can the Operating system run
if(do_this == TRUE){
Five_msec_Delay(FOR_ONE_SECOND); //pause
display_2 = "FORWARD"; //change display
posL2 = LINE_POS_1;
Display_Process(); //push display
straight_line(); //forward
Five_msec_Delay(FOR_ONE_SECOND); //pause
display_2 = "REVERSE"; //change display
posL2 = LINE_POS_1;
Display_Process(); //push display
straight_line_reverse(); //reverse
Five_msec_Delay(FOR_ONE_SECOND);
display_2 = "FORWARD"; //change display
posL2 = LINE_POS_1;
Display_Process(); //push display
straight_line(); //forward
Five_msec_Delay(FOR_ONE_SECOND);
display_2 = "CW-SPIN"; //change display
posL2 = LINE_POS_1;
Display_Process(); //push display
clockwise_spin(); //forward
Five_msec_Delay(FOR_ONE_SECOND);
display_2 = "CCW-SPIN"; //change display
posL2 = LINE_POS_1;
Display_Process(); //push display
counterclockwise_spin(); //forward
Five_msec_Delay(FOR_ONE_SECOND); //pause
display_2 = ""; //clear display
posL2 = LINE_POS_1;
Display_Process(); //push display
do_this = FALSE;
}
}
//------------------------------------------------------------------------------
}
