/**
This function is the main entry of the UI entry.
The function will present the main menu of the system UI.
@param ConnectAllHappened Caller passes the value to UI to avoid unnecessary connect-all.
**/
VOID
EFIAPI
UiEntry (
IN BOOLEAN ConnectAllHappened
)
{
EFI_STATUS Status;
EFI_BOOT_LOGO_PROTOCOL *BootLogo;
//
// Enter Setup page.
//
REPORT_STATUS_CODE (
EFI_PROGRESS_CODE,
(EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_PC_USER_SETUP)
);
//
// Indicate if the connect all has been performed before.
// If has not been performed before, do here.
//
if (!ConnectAllHappened) {
EfiBootManagerConnectAll ();
}
//
// The boot option enumeration time is acceptable in Ui driver
//
EfiBootManagerRefreshAllBootOption ();
//
// Boot Logo is corrupted, report it using Boot Logo protocol.
//
Status = gBS->LocateProtocol (&gEfiBootLogoProtocolGuid, NULL, (VOID **) &BootLogo);
if (!EFI_ERROR (Status) && (BootLogo != NULL)) {
BootLogo->SetBootLogo (BootLogo, NULL, 0, 0, 0, 0);
}
InitializeFrontPage ();
CallFrontPage ();
FreeFrontPage ();
if (mLanguageString != NULL) {
FreePool (mLanguageString);
mLanguageString = NULL;
}
//
//Will leave browser, check any reset required change is applied? if yes, reset system
//
SetupResetReminder ();
}
/**
This function is the main entry of the UI entry.
The function will present the main menu of the system UI.
@param ConnectAllHappened Caller passes the value to UI to avoid unnecessary connect-all.
**/
VOID
EFIAPI
UiEntry (
IN BOOLEAN ConnectAllHappened
)
{
EFI_STATUS Status;
EFI_BOOT_LOGO_PROTOCOL *BootLogo;
//
// Indicate if the connect all has been performed before.
//
if (ConnectAllHappened) {
gConnectAllHappened = TRUE;
}
//
// The boot option enumeration time is acceptable in Ui driver
//
EfiBootManagerRefreshAllBootOption ();
//
// Boot Logo is corrupted, report it using Boot Logo protocol.
//
Status = gBS->LocateProtocol (&gEfiBootLogoProtocolGuid, NULL, (VOID **) &BootLogo);
if (!EFI_ERROR (Status) && (BootLogo != NULL)) {
BootLogo->SetBootLogo (BootLogo, NULL, 0, 0, 0, 0);
}
InitializeFrontPage ();
InitializeDeviceManager ();
InitializeBootManager ();
InitBootMaintenance();
CallFrontPage ();
FreeBMPackage ();
FreeBootManager ();
FreeDeviceManager ();
FreeFrontPage ();
if (mLanguageString != NULL) {
FreePool (mLanguageString);
mLanguageString = NULL;
}
//
//Will leave browser, check any reset required change is applied? if yes, reset system
//
SetupResetReminder ();
}
/**
This function is the main entry of the platform setup entry.
The function will present the main menu of the system setup,
this is the platform reference part and can be customize.
@param TimeoutDefault The fault time out value before the system
continue to boot.
@param ConnectAllHappened The indicater to check if the connect all have
already happened.
**/
VOID
PlatformBdsEnterFrontPage (
IN UINT16 TimeoutDefault,
IN BOOLEAN ConnectAllHappened
)
{
EFI_STATUS Status;
EFI_STATUS StatusHotkey;
EFI_BOOT_LOGO_PROTOCOL *BootLogo;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *SimpleTextOut;
UINTN BootTextColumn;
UINTN BootTextRow;
UINT64 OsIndication;
UINTN DataSize;
EFI_INPUT_KEY Key;
GraphicsOutput = NULL;
SimpleTextOut = NULL;
PERF_START (NULL, "BdsTimeOut", "BDS", 0);
//
// Indicate if we need connect all in the platform setup
//
if (ConnectAllHappened) {
gConnectAllHappened = TRUE;
}
if (!mModeInitialized) {
//
// After the console is ready, get current video resolution
// and text mode before launching setup at first time.
//
Status = gBS->HandleProtocol (
gST->ConsoleOutHandle,
&gEfiGraphicsOutputProtocolGuid,
(VOID**)&GraphicsOutput
);
if (EFI_ERROR (Status)) {
GraphicsOutput = NULL;
}
Status = gBS->HandleProtocol (
gST->ConsoleOutHandle,
&gEfiSimpleTextOutProtocolGuid,
(VOID**)&SimpleTextOut
);
if (EFI_ERROR (Status)) {
SimpleTextOut = NULL;
}
if (GraphicsOutput != NULL) {
//
// Get current video resolution and text mode.
//
mBootHorizontalResolution = GraphicsOutput->Mode->Info->HorizontalResolution;
mBootVerticalResolution = GraphicsOutput->Mode->Info->VerticalResolution;
}
if (SimpleTextOut != NULL) {
Status = SimpleTextOut->QueryMode (
SimpleTextOut,
SimpleTextOut->Mode->Mode,
&BootTextColumn,
&BootTextRow
);
mBootTextModeColumn = (UINT32)BootTextColumn;
mBootTextModeRow = (UINT32)BootTextRow;
}
//
// Get user defined text mode for setup.
//
mSetupHorizontalResolution = PcdGet32 (PcdSetupVideoHorizontalResolution);
mSetupVerticalResolution = PcdGet32 (PcdSetupVideoVerticalResolution);
mSetupTextModeColumn = PcdGet32 (PcdSetupConOutColumn);
mSetupTextModeRow = PcdGet32 (PcdSetupConOutRow);
mModeInitialized = TRUE;
}
//
// goto FrontPage directly when EFI_OS_INDICATIONS_BOOT_TO_FW_UI is set
//
OsIndication = 0;
DataSize = sizeof(UINT64);
Status = gRT->GetVariable (
L"OsIndications",
&gEfiGlobalVariableGuid,
NULL,
&DataSize,
&OsIndication
);
//
// goto FrontPage directly when EFI_OS_INDICATIONS_BOOT_TO_FW_UI is set. Skip HotkeyBoot
//
if (!EFI_ERROR(Status) && ((OsIndication & EFI_OS_INDICATIONS_BOOT_TO_FW_UI) != 0)) {
//
// Clear EFI_OS_INDICATIONS_BOOT_TO_FW_UI to acknowledge OS
//
OsIndication &= ~((UINT64)EFI_OS_INDICATIONS_BOOT_TO_FW_UI);
Status = gRT->SetVariable (
L"OsIndications",
&gEfiGlobalVariableGuid,
EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
sizeof(UINT64),
&OsIndication
);
//
// Changing the content without increasing its size with current variable implementation shouldn't fail.
//
ASSERT_EFI_ERROR (Status);
//
// Follow generic rule, Call ReadKeyStroke to connect ConIn before enter UI
//
if (PcdGetBool (PcdConInConnectOnDemand)) {
gST->ConIn->ReadKeyStroke(gST->ConIn, &Key);
}
//
// Ensure screen is clear when switch Console from Graphics mode to Text mode
//
gST->ConOut->EnableCursor (gST->ConOut, TRUE);
gST->ConOut->ClearScreen (gST->ConOut);
} else {
HotkeyBoot ();
if (TimeoutDefault != 0xffff) {
Status = ShowProgress (TimeoutDefault);
StatusHotkey = HotkeyBoot ();
if (!FeaturePcdGet(PcdBootlogoOnlyEnable) || !EFI_ERROR(Status) || !EFI_ERROR(StatusHotkey)){
//
// Ensure screen is clear when switch Console from Graphics mode to Text mode
// Skip it in normal boot
//
gST->ConOut->EnableCursor (gST->ConOut, TRUE);
gST->ConOut->ClearScreen (gST->ConOut);
}
if (EFI_ERROR (Status)) {
//
// Timeout or user press enter to continue
//
goto Exit;
}
}
}
//
// Boot Logo is corrupted, report it using Boot Logo protocol.
//
Status = gBS->LocateProtocol (&gEfiBootLogoProtocolGuid, NULL, (VOID **) &BootLogo);
if (!EFI_ERROR (Status) && (BootLogo != NULL)) {
BootLogo->SetBootLogo (BootLogo, NULL, 0, 0, 0, 0);
}
//
// Install BM HiiPackages.
// Keep BootMaint HiiPackage, so that it can be covered by global setting.
//
InitBMPackage ();
Status = EFI_SUCCESS;
do {
//
// Set proper video resolution and text mode for setup
//
BdsSetConsoleMode (TRUE);
InitializeFrontPage (FALSE);
//
// Update Front Page strings
//
UpdateFrontPageStrings ();
gCallbackKey = 0;
CallFrontPage ();
//
// If gCallbackKey is greater than 1 and less or equal to 5,
// it will launch configuration utilities.
// 2 = set language
// 3 = boot manager
// 4 = device manager
// 5 = boot maintenance manager
//
if (gCallbackKey != 0) {
REPORT_STATUS_CODE (
EFI_PROGRESS_CODE,
(EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_PC_USER_SETUP)
);
}
//
// Based on the key that was set, we can determine what to do
//
switch (gCallbackKey) {
//
// The first 4 entries in the Front Page are to be GUARANTEED to remain constant so IHV's can
// describe to their customers in documentation how to find their setup information (namely
// under the device manager and specific buckets)
//
// These entries consist of the Continue, Select language, Boot Manager, and Device Manager
//
case FRONT_PAGE_KEY_CONTINUE:
//
// User hit continue
//
break;
case FRONT_PAGE_KEY_LANGUAGE:
//
// User made a language setting change - display front page again
//
break;
case FRONT_PAGE_KEY_BOOT_MANAGER:
//
// Remove the installed BootMaint HiiPackages when exit.
//
FreeBMPackage ();
//
// User chose to run the Boot Manager
//
CallBootManager ();
//
// Reinstall BootMaint HiiPackages after exiting from Boot Manager.
//
InitBMPackage ();
break;
case FRONT_PAGE_KEY_DEVICE_MANAGER:
//
// Display the Device Manager
//
do {
CallDeviceManager ();
} while (gCallbackKey == FRONT_PAGE_KEY_DEVICE_MANAGER);
break;
case FRONT_PAGE_KEY_BOOT_MAINTAIN:
//
// Display the Boot Maintenance Manager
//
BdsStartBootMaint ();
break;
}
} while ((Status == EFI_SUCCESS) && (gCallbackKey != FRONT_PAGE_KEY_CONTINUE));
if (mLanguageString != NULL) {
FreePool (mLanguageString);
mLanguageString = NULL;
}
//
//Will leave browser, check any reset required change is applied? if yes, reset system
//
SetupResetReminder ();
//
// Remove the installed BootMaint HiiPackages when exit.
//
FreeBMPackage ();
Exit:
//
// Automatically load current entry
// Note: The following lines of code only execute when Auto boot
// takes affect
//
PERF_END (NULL, "BdsTimeOut", "BDS", 0);
}
/**
Service routine for BdsInstance->Entry(). Devices are connected, the
consoles are initialized, and the boot options are tried.
@param This Protocol Instance structure.
**/
VOID
EFIAPI
BdsEntry (
IN EFI_BDS_ARCH_PROTOCOL *This
)
{
LIST_ENTRY DriverOptionList;
LIST_ENTRY BootOptionList;
UINTN BootNextSize;
CHAR16 *FirmwareVendor;
EFI_STATUS Status;
UINT16 BootTimeOut;
UINTN Index;
EDKII_VARIABLE_LOCK_PROTOCOL *VariableLock;
//
// Insert the performance probe
//
PERF_END (NULL, "DXE", NULL, 0);
PERF_START (NULL, "BDS", NULL, 0);
//
// Initialize the global system boot option and driver option
//
InitializeListHead (&DriverOptionList);
InitializeListHead (&BootOptionList);
//
// Initialize hotkey service
//
InitializeHotkeyService ();
//
// Fill in FirmwareVendor and FirmwareRevision from PCDs
//
FirmwareVendor = (CHAR16 *)PcdGetPtr (PcdFirmwareVendor);
gST->FirmwareVendor = AllocateRuntimeCopyPool (StrSize (FirmwareVendor), FirmwareVendor);
ASSERT (gST->FirmwareVendor != NULL);
gST->FirmwareRevision = PcdGet32 (PcdFirmwareRevision);
//
// Fixup Tasble CRC after we updated Firmware Vendor and Revision
//
gST->Hdr.CRC32 = 0;
gBS->CalculateCrc32 ((VOID *)gST, sizeof(EFI_SYSTEM_TABLE), &gST->Hdr.CRC32);
//
// Validate Variable.
//
BdsFormalizeEfiGlobalVariable();
//
// Mark the read-only variables if the Variable Lock protocol exists
//
Status = gBS->LocateProtocol (&gEdkiiVariableLockProtocolGuid, NULL, (VOID **) &VariableLock);
DEBUG ((EFI_D_INFO, "[BdsDxe] Locate Variable Lock protocol - %r\n", Status));
if (!EFI_ERROR (Status)) {
for (Index = 0; Index < ARRAY_SIZE (mReadOnlyVariables); Index++) {
Status = VariableLock->RequestToLock (VariableLock, mReadOnlyVariables[Index], &gEfiGlobalVariableGuid);
ASSERT_EFI_ERROR (Status);
}
}
//
// Report Status Code to indicate connecting drivers will happen
//
REPORT_STATUS_CODE (
EFI_PROGRESS_CODE,
(EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_BEGIN_CONNECTING_DRIVERS)
);
InitializeHwErrRecSupport();
//
// Initialize L"Timeout" EFI global variable.
//
BootTimeOut = PcdGet16 (PcdPlatformBootTimeOut);
if (BootTimeOut != 0xFFFF) {
//
// If time out value equal 0xFFFF, no need set to 0xFFFF to variable area because UEFI specification
// define same behavior between no value or 0xFFFF value for L"Timeout".
//
BdsDxeSetVariableAndReportStatusCodeOnError (
L"Timeout",
&gEfiGlobalVariableGuid,
EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
sizeof (UINT16),
&BootTimeOut
);
}
//
// bugbug: platform specific code
// Initialize the platform specific string and language
//
InitializeStringSupport ();
InitializeLanguage (TRUE);
InitializeFrontPage (TRUE);
//
// Do the platform init, can be customized by OEM/IBV
//
PERF_START (NULL, "PlatformBds", "BDS", 0);
PlatformBdsInit ();
//
// Set up the device list based on EFI 1.1 variables
// process Driver#### and Load the driver's in the
// driver option list
//
BdsLibBuildOptionFromVar (&DriverOptionList, L"DriverOrder");
if (!IsListEmpty (&DriverOptionList)) {
BdsLibLoadDrivers (&DriverOptionList);
}
//
// Check if we have the boot next option
//
mBootNext = BdsLibGetVariableAndSize (
L"BootNext",
&gEfiGlobalVariableGuid,
&BootNextSize
);
//
// Setup some platform policy here
//
PlatformBdsPolicyBehavior (&DriverOptionList, &BootOptionList, BdsProcessCapsules, BdsMemoryTest);
PERF_END (NULL, "PlatformBds", "BDS", 0);
//
// BDS select the boot device to load OS
//
BdsBootDeviceSelect ();
//
// Only assert here since this is the right behavior, we should never
// return back to DxeCore.
//
ASSERT (FALSE);
return ;
}
/**
Service routine for BdsInstance->Entry(). Devices are connected, the
consoles are initialized, and the boot options are tried.
@param This Protocol Instance structure.
**/
VOID
EFIAPI
BdsEntry (
IN EFI_BDS_ARCH_PROTOCOL *This
)
{
LIST_ENTRY DriverOptionList;
LIST_ENTRY BootOptionList;
UINTN BootNextSize;
CHAR16 *FirmwareVendor;
//
// Insert the performance probe
//
PERF_END (NULL, "DXE", NULL, 0);
PERF_START (NULL, "BDS", NULL, 0);
//
// Initialize the global system boot option and driver option
//
InitializeListHead (&DriverOptionList);
InitializeListHead (&BootOptionList);
//
// Initialize hotkey service
//
InitializeHotkeyService ();
//
// Fill in FirmwareVendor and FirmwareRevision from PCDs
//
FirmwareVendor = (CHAR16 *)PcdGetPtr (PcdFirmwareVendor);
gST->FirmwareVendor = AllocateRuntimeCopyPool (StrSize (FirmwareVendor), FirmwareVendor);
ASSERT (gST->FirmwareVendor != NULL);
gST->FirmwareRevision = PcdGet32 (PcdFirmwareRevision);
//
// Fixup Tasble CRC after we updated Firmware Vendor and Revision
//
gBS->CalculateCrc32 ((VOID *)gST, sizeof(EFI_SYSTEM_TABLE), &gST->Hdr.CRC32);
//
// Validate Variable.
//
BdsFormalizeEfiGlobalVariable();
//
// Do the platform init, can be customized by OEM/IBV
//
PERF_START (NULL, "PlatformBds", "BDS", 0);
PlatformBdsInit ();
InitializeHwErrRecSupport();
//
// bugbug: platform specific code
// Initialize the platform specific string and language
//
InitializeStringSupport ();
InitializeLanguage (TRUE);
InitializeFrontPage (TRUE);
//
// Set up the device list based on EFI 1.1 variables
// process Driver#### and Load the driver's in the
// driver option list
//
BdsLibBuildOptionFromVar (&DriverOptionList, L"DriverOrder");
if (!IsListEmpty (&DriverOptionList)) {
BdsLibLoadDrivers (&DriverOptionList);
}
//
// Check if we have the boot next option
//
mBootNext = BdsLibGetVariableAndSize (
L"BootNext",
&gEfiGlobalVariableGuid,
&BootNextSize
);
//
// Setup some platform policy here
//
PlatformBdsPolicyBehavior (&DriverOptionList, &BootOptionList, BdsProcessCapsules, BdsMemoryTest);
PERF_END (NULL, "PlatformBds", "BDS", 0);
//
// BDS select the boot device to load OS
//
BdsBootDeviceSelect ();
//
// Only assert here since this is the right behavior, we should never
// return back to DxeCore.
//
ASSERT (FALSE);
return ;
}
