/**
* @brief Entry point of the USB mamnagement
*
* Depending on the USB mode supported (HOST/DEVICE/DUAL_ROLE) the function
* calls the coresponding usb management function.
*
* @param none
*
* @return none
*/
void usb_task(void)
{
// ---- DUAL ROLE DEVICE USB MODE ---------------------------------------------
#if ((USB_DEVICE_FEATURE == ENABLED)&& (USB_HOST_FEATURE == ENABLED))
if(Is_usb_id_device())
{ g_usb_mode=USB_MODE_DEVICE;}
else
{ g_usb_mode=USB_MODE_HOST;}
if( g_old_usb_mode != g_usb_mode )
{
// ID pin hot state change
#if ( ID_PIN_CHANGE_GENERATE_RESET == ENABLE)
// Hot ID transition generates wdt reset
wdtdrv_enable(WDTO_16MS);
while(1);
#else
// Hot ID transition reset USB mode
Usb_ack_id_transition(); // REQUIRED
if (Is_usb_id_host())
{
Usb_disable_resume_interrupt();
Usb_disable_wake_up_interrupt();
Usb_disable_suspend_interrupt();
Usb_disable_reset_interrupt();
Usb_detach();
Usb_disable();
usb_host_task_init();
}
else
{
Host_disable_device_disconnection_interrupt();
Host_disable_sof_interrupt();
Host_disable_sof();
Usb_disable_vbus();
Usb_disable_manual_vbus();
Usb_freeze_clock();
Usb_disable();
usb_device_task_init();
}
#endif
}
// Store current usb mode, for mode change detection
g_old_usb_mode=g_usb_mode;
// Depending on current usb mode, launch the correct usb task (device or host)
switch(g_usb_mode)
{
case USB_MODE_DEVICE:
usb_device_task();
break;
case USB_MODE_HOST:
usb_host_task();
break;
case USB_MODE_UNDEFINED: // No break !
default:
break;
}
// -----------------------------------------------------------------------------
// ---- DEVICE ONLY USB MODE ---------------------------------------------------
#elif ((USB_DEVICE_FEATURE == ENABLED)&& (USB_HOST_FEATURE == DISABLE))
usb_device_task();
// -----------------------------------------------------------------------------
// ---- REDUCED HOST ONLY USB MODE ---------------------------------------------
#elif ((USB_DEVICE_FEATURE == DISABLE)&& (USB_HOST_FEATURE == ENABLED))
usb_host_task();
// -----------------------------------------------------------------------------
//! ---- ERROR, NO MODE ENABLED -------------------------------------------------
#elif ((USB_DEVICE_FEATURE == DISABLE)&& (USB_HOST_FEATURE == DISABLE))
#error at least one of USB_DEVICE_FEATURE or USB_HOST_FEATURE should be enabled
#error otherwise the usb task has nothing to do ...
#endif
// -----------------------------------------------------------------------------
}
//------------------------------------------------------------------------------
/// USB interrupt subroutine
///
/// This function is called each time a USB interrupt occurs.
/// The following USB DEVICE events are taken in charge:
/// - VBus On / Off
/// - Start Of Frame
/// - Suspend
/// - Wake-Up
/// - Resume
/// - Reset
/// - Start of frame
///
/// The following USB HOST events are taken in charge:
/// - Device connection
/// - Device Disconnection
/// - Start Of Frame
/// - ID pin change
/// - SOF (or Keep alive in low speed) sent
/// - Wake up on USB line detected
///
/// The following USB HOST events are taken in charge:
/// - HNP success (Role Exchange)
/// - HNP failure (HNP Error)
///
/// For each event, the user can launch an action by completing
/// the associate define (See conf_usb.h file to add action upon events)
///
/// Note: Only interrupts events that are enabled are processed
//------------------------------------------------------------------------------
void usb_general_interrupt(void)
{
//TRACE_DEBUG("usb_general_interrupt\n\r");
// ---------- DEVICE events management -----------------------------------
// -----------------------------------------------------------------------
//- VBUS state detection
// -----------------------------------------------------------------------
/// Arbitrer
// -----------------------------------------------------------------------
if (Is_usb_vbus_transition() && Is_usb_vbus_interrupt_enabled()
&& Is_usb_id_device()) {
Usb_ack_vbus_transition();
if (Is_usb_vbus_high()) {
usb_connected = TRUE;
Usb_vbus_on_action();
Usb_send_event(EVT_USB_POWERED);
//jcb Usb_enable_reset_interrupt();
//usb_start_device();
USBD_Connect();//Usb_attach();
}
else {
TRACE_DEBUG("VBUS low\n\r");
USBD_Disconnect();
Usb_device_stop_hnp();
TRACE_DEBUG("Usb_select_device4\n\r");
Usb_select_device();
Clear_all_user_request();
Usb_vbus_off_action();
usb_connected = FALSE;
usb_configuration_nb = 0;
Usb_send_event(EVT_USB_UNPOWERED);
}
}
// -----------------------------------------------------------------------
/// Device
// -----------------------------------------------------------------------
// - Device start of frame received
if (Is_usb_sof() && Is_sof_interrupt_enabled()) {
// TRACE_DEBUG_WP("F"); // device
Usb_ack_sof();
Usb_sof_action();
//sof_seen_in_session = TRUE;
otg_last_sof_received = UDFNUML; // store last frame number received
}
// -----------------------------------------------------------------------
/// Device
// -----------------------------------------------------------------------
// - Device Suspend event (no more USB activity detected)
if (Is_usb_suspend()) { //&& Is_suspend_interrupt_enabled()) {
//TRACE_DEBUG_WP("D\n\r");
// 1st : B-PERIPH mode ?
if (Is_usb_id_device()) {
// HNP Handler
TRACE_DEBUG("HNP Handler\n\r");
//TRACE_DEBUG("device_state = %d\n\r", device_state);
//TRACE_DEBUG("b_uut_device_state = %d\n\r", b_uut_device_state);
if (Is_host_requested_hnp() // "b_hnp_enable" feature received
&& (Is_session_started_with_srp() || Is_user_requested_hnp() )) {
if (otg_device_nb_hnp_retry == 0) {
otg_features_supported &= ~USBFeatureRequest_OTG_B_HNP_ENABLE;
}
else {
Ack_user_request_hnp();
Usb_ack_hnp_error_interrupt();
Usb_ack_role_exchange_interrupt();
Usb_enable_role_exchange_interrupt();
Usb_enable_hnp_error_interrupt();
Usb_device_initiate_hnp();
otg_device_nb_hnp_retry--;
}
}
else
{
// Remote wake-up handler
//TRACE_DEBUG("Remote wake-up handler\n\r");
//TRACE_DEBUG("device_state = %d\n\r", device_state);
//TRACE_DEBUG("b_uut_device_state = %d\n\r", b_uut_device_state);
if ((remote_wakeup_feature == ENABLE) && (usb_configuration_nb != 0))
{
//TRACE_DEBUG("enabled\n\r");
// After that user can execute "Usb_initiate_remote_wake_up()" to initiate a remote wake-up
// Note that the suspend interrupt flag SUSPI must still be set to enable upstream resume
// So the SUSPE enable bit must be cleared to avoid redundant interrupt
// ****************
// Please note also that is Vbus is lost during an upstream resume (Host disconnection),
// the RMWKUP bit (used to initiate remote wake up and that is normally cleared by hardware when sent)
// remains set after the event, so that a good way to handle this feature is :
// Usb_initiate_remote_wake_up();
// while (Is_usb_pending_remote_wake_up())
// {
// if (Is_usb_vbus_low())
// {
// // Emergency action (reset macro, etc.) if Vbus lost during resuming
// break;
// }
// }
// Usb_ack_remote_wake_up_start();
// ****************
}
else {
//TRACE_DEBUG("disabled: %d %d\n\r", usb_configuration_nb, remote_wakeup_feature);
// No remote wake-up supported
Usb_send_event(EVT_USB_SUSPEND);
}
}
}
else
{
//TRACE_DEBUG("ici\n\r");
// A-PERIPH mode (will cause a session end, handled in usb_host_task.c)
Usb_send_event(EVT_USB_SUSPEND);
Usb_suspend_action();
//jcb Usb_ack_suspend();
}
}
// -----------------------------------------------------------------------
/// Device
// -----------------------------------------------------------------------
// - Wake up event (USB activity detected): Used to resume
if (Is_usb_wake_up() && Is_swake_up_interrupt_enabled()) {
TRACE_DEBUG("W\n\r");
Usb_unfreeze_clock();
Usb_send_event(EVT_USB_WAKE_UP);
}
// -----------------------------------------------------------------------
/// Device
// -----------------------------------------------------------------------
// - Resume state bus detection
if (Is_usb_resume() && Is_resume_interrupt_enabled()) {
TRACE_DEBUG("Resume state bus detect\n\r");
Usb_send_event(EVT_USB_RESUME);
}
// -----------------------------------------------------------------------
/// Device
// -----------------------------------------------------------------------
// - USB bus reset detection
if (Is_usb_reset()&& Is_reset_interrupt_enabled()) {
TRACE_DEBUG_WP("B\n\r");
if (Is_usb_id_host()) {
//TRACE_DEBUG_WP("id_host\n\r");
dev_configure_endpoint(EP_CONTROL,
TYPE_CONTROL,
DIRECTION_OUT,
SIZE_64,
ONE_BANK,
NYET_DISABLED);
}
// First initialization is important to be synchronized
// A reset must first have been received
if (device_state == A_PERIPHERAL) {
//TRACE_DEBUG_WP("r A_PERIPHERAL\n\r");
otg_last_sof_received = UDFNUML;
otg_last_sof_stored = UDFNUML;
Usb_ack_sof();
Usb_enable_sof_interrupt();
reset_received = TRUE;
Timer16_set_counter(0);
}
Usb_reset_action();
Usb_send_event(EVT_USB_RESET);
}
// ---------- OTG events management ------------------------------------
// ---------------------------------------------------------------------
// -----------------------------------------------------------------------
/// Arbitrer
// -----------------------------------------------------------------------
// - OTG HNP Success detection
if (Is_usb_role_exchange_interrupt() && Is_role_exchange_interrupt_enabled()) {
// TRACE_DEBUG("OTG HNP detect\n\r");
Usb_ack_role_exchange_interrupt();
Host_ack_device_connection();
Host_ack_device_disconnection();
Otg_send_event(EVT_OTG_HNP_SUCCESS);
End_session_with_srp();
Clear_otg_features_from_host();
if (Is_usb_id_host()) {
// HOST (A- or B-) mode
if ((device_state != A_PERIPHERAL) && (device_state != A_END_HNP_WAIT_VFALL)) {
static volatile unsigned int jcb;
// Current mode is A-HOST, device will take the A-PERIPHERAL role
b_uut_device_state = B_PERIPHERAL;
device_state = A_PERIPHERAL;
usb_connected = FALSE;
usb_configuration_nb = 0;
Usb_select_device();
USBD_Connect();//Usb_attach();
Usb_unfreeze_clock();
Usb_disable_role_exchange_interrupt();
Usb_disable_hnp_error_interrupt();
Usb_device_stop_hnp();
Usb_ack_reset();
Timer16_set_counter(0);
Usb_freeze_clock(); // USB clock can be freezed to slow down events and condition detection
//jcb while (Timer16_get_counter_low() != 20);
jcb=0;
while( jcb <100000){ jcb++; }
Usb_unfreeze_clock();
reset_received = FALSE;
Usb_disable_sof_interrupt(); // will be set in the next OTG Timer IT (mandatory)
Usb_enable_suspend_interrupt();
Usb_enable_reset_interrupt();
dev_configure_endpoint(EP_CONTROL,
TYPE_CONTROL,
DIRECTION_OUT,
SIZE_64,
ONE_BANK,
NYET_DISABLED);
}
}
else {
// In B_HOST mode, the HNPREQ bit must not be cleared because it releases the bus in suspend mode (and sof can't start)
if ((b_uut_device_state != B_HOST) && (b_uut_device_state != B_END_HNP_SUSPEND)) {
static volatile unsigned int jcb2;
// Current mode is B-PERIPHERAL, device will go into B-HOST role
End_session_with_srp();
Clear_otg_features_from_host();
b_uut_device_state = B_HOST;
device_state = DEVICE_ATTACHED;
usb_connected = FALSE;
usb_configuration_nb = 0;
TRACE_DEBUG("Select host 3\n\r");
Usb_select_host();
TRACE_DEBUG("Send reset\n\r");
Host_send_reset(); // send the first RESET
while (Host_is_reset());
TRACE_DEBUG("Reset passed\n\r");
jcb2=0;
while( jcb2 <1000000){ jcb2++; }
Host_enable_sof(); // start Host (sof)
Usb_disable_role_exchange_interrupt();
Usb_disable_hnp_error_interrupt();
Clear_all_user_request();
TRACE_DEBUG("Select host 3\n\r");
}
}
}
// -----------------------------------------------------------------------
/// Arbitrer
// -----------------------------------------------------------------------
// - OTG HNP Failure detection
if (Is_usb_hnp() && Is_usb_hnp_error_interrupt()&& Is_hnp_error_interrupt_enabled()) {
TRACE_DEBUG("OTG HNP failure\n\r");
Usb_device_stop_hnp();
Usb_disable_role_exchange_interrupt();
Usb_disable_hnp_error_interrupt();
Usb_ack_hnp_error_interrupt();
if (Is_usb_id_device()) {
Otg_send_event(EVT_OTG_HNP_ERROR);
Clear_all_user_request();
}
}
// ---------- HOST events management -----------------------------------
// ---------------------------------------------------------------------
// -----------------------------------------------------------------------
/// Arbitrer
// -----------------------------------------------------------------------
// - ID pin change detection
if(Is_usb_id_transition()&&Is_usb_id_interrupt_enabled()) {
TRACE_DEBUG("ID pin change\n\r");
TRACE_DEBUG("device_state = %d\n\r", device_state);
TRACE_DEBUG("b_uut_device_state = %d\n\r", b_uut_device_state);
Usb_device_stop_hnp();
Clear_all_user_request();
if(Is_usb_id_device()) {
g_usb_mode = USB_MODE_DEVICE;
}
else {
g_usb_mode = USB_MODE_HOST;
}
Usb_ack_id_transition();
if( g_usb_mode != g_old_usb_mode) { // Basic Debounce
if(Is_usb_id_device()) { // Going into device mode
Usb_send_event(EVT_USB_DEVICE_FUNCTION);
b_uut_device_state = B_IDLE;
device_state = DEVICE_UNATTACHED;
id_changed_to_host_event = DISABLE;
}
else { // Going into host mode
b_uut_device_state = B_IDLE;
device_state = DEVICE_UNATTACHED;
Usb_send_event(EVT_USB_HOST_FUNCTION);
id_changed_to_host_event = ENABLE;
}
Usb_id_transition_action();
TRACE_INFO("Pin Id changed\n\r");
}
}
// -----------------------------------------------------------------------
/// Host
// -----------------------------------------------------------------------
// - The device has been disconnected
// JCB to be fix
if(Is_device_disconnection() && Is_host_device_disconnection_interrupt_enabled()) {
TRACE_DEBUG("device disconnect\n\r");
host_disable_all_pipe();
Host_ack_device_disconnection();
device_state=DEVICE_DISCONNECTED;
Usb_send_event(EVT_HOST_DISCONNECTION);
TRACE_INFO("Device disconnected\n\r");
Host_device_disconnection_action();
Clear_all_user_request();
}
// -----------------------------------------------------------------------
/// Host
// -----------------------------------------------------------------------
// - Device connection
if(Is_device_connection() && Is_host_device_connection_interrupt_enabled()) {
TRACE_DEBUG("device connect\n\r");
Host_ack_device_connection();
host_disable_all_pipe();
Host_device_connection_action();
}
// -----------------------------------------------------------------------
/// Host
// -----------------------------------------------------------------------
// - Host Start of frame has been sent
if (Is_host_sof() && Is_host_sof_interrupt_enabled()) {
//TRACE_DEBUG_WP("_"); // host
Host_ack_sof();
Usb_send_event(EVT_HOST_SOF);
private_sof_counter++;
// delay timeout management for interrupt tranfer mode in host mode
#if ((USB_HOST_PIPE_INTERRUPT_TRANSFER==ENABLE) && (TIMEOUT_DELAY_ENABLE==ENABLE))
if (private_sof_counter>=250) { // Count 1/4 sec
private_sof_counter=0;
for(i=0;i<MAX_EP_NB;i++) {
if(it_pipe_str[i].enable==ENABLE) {
save_pipe_nb=Host_get_selected_pipe();
Host_select_pipe(i);
if((++it_pipe_str[i].timeout>TIMEOUT_DELAY) && (Host_get_pipe_type()!=TYPE_INTERRUPT)) {
it_pipe_str[i].enable=DISABLE;
it_pipe_str[i].status=PIPE_DELAY_TIMEOUT;
Host_stop_pipe_interrupt(i);
if (is_any_interrupt_pipe_active()==FALSE) { // If no more transfer is armed
if (g_sav_int_sof_enable==FALSE) {
Host_disable_sof_interrupt();
}
}
it_pipe_str[i].handle(PIPE_DELAY_TIMEOUT,it_pipe_str[i].nb_byte_processed);
}
Host_select_pipe(save_pipe_nb);
}
}
}
#endif // (USB_HOST_PIPE_INTERRUPT_TRANSFER==ENABLE) && (TIMEOUT_DELAY_ENABLE==ENABLE))
Host_sof_action();
}
// -----------------------------------------------------------------------
/// Host
// -----------------------------------------------------------------------
// - Host Wake-up has been received
if (Is_host_hwup() && Is_host_hwup_interrupt_enabled()) {
TRACE_DEBUG("Host wake up\n\r");
Host_disable_hwup_interrupt(); // Wake up interrupt should be disable host is now wake up !
Host_disable_remote_wakeup_interrupt();
// CAUTION HWUP can be cleared only when USB clock is active (not frozen)!
Usb_unfreeze_clock(); // Enable clock on USB interface
Host_enable_sof(); // start sending SOF
Host_ack_hwup(); // Clear HWUP interrupt flag
Host_ack_remote_wakeup();
Usb_send_event(EVT_HOST_HWUP); // Send software event
Usb_send_event(EVT_HOST_REMOTE_WAKEUP);
Host_hwup_action(); // Map custom action
if (Is_usb_hnp()) {
Usb_host_reject_hnp();
Usb_disable_hnp_error_interrupt();
Usb_disable_role_exchange_interrupt();
}
Host_send_resume();
}
// -----------------------------------------------------------------------
/// Host
// -----------------------------------------------------------------------
// Remote Wake Up has been received
if (Is_host_remote_wakeup_interrupt_enabled() && Is_host_remote_wakeup()) {
TRACE_DEBUG("Remote wake up\n\r");
Host_disable_remote_wakeup_interrupt();
Host_disable_hwup_interrupt();
Host_ack_remote_wakeup();
Host_ack_hwup(); // Clear HWUP interrupt flag
Usb_unfreeze_clock(); // Enable clock on USB interface
Host_enable_sof(); // start sending SOF
Usb_send_event(EVT_HOST_REMOTE_WAKEUP);
Usb_send_event(EVT_HOST_HWUP); // Send software event
if (Is_usb_hnp()) {
Usb_host_reject_hnp();
Usb_disable_hnp_error_interrupt();
Usb_disable_role_exchange_interrupt();
}
Host_send_resume();
}
}
