Пример #1
0
/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_GPIO);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_SelectLayer(0);
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS DynamicSwitch Host");
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Dynamic Switch Interface */
  LCD_UsrLog("Starting DynamicSwitch Demo\n");
  LCD_UsrLog("Plug your device To Continue...\n");
}
Пример #2
0
/**
* @brief  USBH_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;  
  
  if(startup == 0 )
  {
    startup = 1;
    /* Configure the LEDs */
    STM_EVAL_LEDInit(LED1);
    STM_EVAL_LEDInit(LED2);
    STM_EVAL_LEDInit(LED3); 
    STM_EVAL_LEDInit(LED4); 
    
    STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_GPIO);
    
#ifdef USE_STM3210C_EVAL
    STM3210C_LCD_Init();  
#else
    STM322xG_LCD_Init();
#endif
    LCD_LOG_Init();
#ifdef USE_USB_OTG_HS 
    LCD_LOG_SetHeader(" USB OTG HS HID Host");
#else
    LCD_LOG_SetHeader(" USB OTG FS HID Host");
#endif
    LCD_UsrLog("> USB Host library started.\n"); 
    LCD_LOG_SetFooter ("     USB Host Library v2.0.0" );
  }
}
Пример #3
0
/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
    /* Configure Key Button */
    BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);

    /* Configure Joystick in EXTI mode */
    BSP_JOY_Init(JOY_MODE_EXTI);

    /* Configure LED1, LED2, LED3 and LED4 */
    BSP_LED_Init(LED1);
    BSP_LED_Init(LED2);
    BSP_LED_Init(LED3);
    BSP_LED_Init(LED4);

    /* Initialize the LCD */
    BSP_LCD_Init();

    /* Initialize the LCD Log module */
    LCD_LOG_Init();

#ifdef USE_USB_HS
    LCD_LOG_SetHeader((uint8_t *)" USB HS DynamicSwitch Host");
#else
    LCD_LOG_SetHeader((uint8_t *)" USB FS DynamicSwitch Host");
#endif

    LCD_UsrLog("USB Host library started.\n");

    /* Start Dynamic Switch Interface */
    LCD_UsrLog("Starting DynamicSwitch Demo\n");
    LCD_UsrLog("Plug your device To Continue...\n");
}
Пример #4
0
/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MSC Interface */
  USBH_UsrLog("Starting MSC Demo");
  
  Menu_Init();
}
Пример #5
0
/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);

  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);

  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);

  /* Initialize the LCD */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_SelectLayer(0);

  /* Init the LCD Log module */
  LCD_LOG_Init();

#ifdef USE_USB_HS
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif

  LCD_UsrLog("USB Host library started.\n");

  /* Initialize menu and MSC process */
  USBH_UsrLog("Starting MSC Demo");
  Menu_Init();
}
Пример #6
0
/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                 
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB HS DynamicSwitch Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB FS DynamicSwitch Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Dynamic Switch Interface */
  LCD_UsrLog("Starting DynamicSwitch Demo\n");
  LCD_UsrLog("Plug your device To Continue...\n");
}
Пример #7
0
/**
  * @brief  DUALCORE application Init.
  * @param  None
  * @retval None
  */
static void DUAL_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG DualCore Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start DualCore Interface */
  USBH_UsrLog("Initializing hardware....");
  DUAL_MenuInit(); 
}
Пример #8
0
/**
* @brief  Displays the message on LCD on device lib initialization
* @param  None
* @retval None
*/
void USBD_USR_Init(void)
{
  /* Initialize LEDs */
  STM_EVAL_LEDInit(LED4);   

  /* Init LCD */
  STM32f4_Discovery_LCD_Init();
  
  LCD_LOG_Init();
  
#ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS MSC Device");
#else
  LCD_LOG_SetHeader(" USB OTG FS MSC Device");
#endif
  LCD_UsrLog("> USB device library started.\n"); 
  LCD_LOG_SetFooter ("     USB Device Library v1.1.0" );
  
  
  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 42, USER_INFORMATION1);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 30, USER_INFORMATION2);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR);  
}
Пример #9
0
/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}
Пример #10
0
/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
  
  /* Configure LED1*/
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}
Пример #11
0
/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_EXTI);
      
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Initialize menu and MSC process */
  Menu_Init();
}
Пример #12
0
/**
  * @brief  DUALCORE application Init.
  * @param  None
  * @retval None
  */
static void DUAL_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG DualCore Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start DualCore Interface */
  USBH_UsrLog("Initializing hardware....");
  DUAL_MenuInit(); 
}
Пример #13
0
/**
  * @brief  CDC application Init
  * @param  None
  * @retval None
  */
static void CDC_InitApplication(void)
{
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_GPIO);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_SelectLayer(0);
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS CDC Host");
  LCD_UsrLog("USB Host library started.\n"); 
    
  /* Start CDC Interface */
  USBH_UsrLog("Starting CDC Demo");
  
  Menu_Init();
}
Пример #14
0
/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
    
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Initialize menu and MSC process */
  USBH_UsrLog("Starting MSC Demo");
  Menu_Init();
}
Пример #15
0
/**
  * @brief  HID application Init
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);

  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  HID_MenuInit();
}
Пример #16
0
/**
* @brief  USBD_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBD_USR_Init(void)
{  
  /* Initialize LEDs */
  STM_EVAL_LEDInit(LED1);
  STM_EVAL_LEDInit(LED2);
  STM_EVAL_LEDInit(LED3);
  STM_EVAL_LEDInit(LED4);   
  
  /* Initialize the LCD */
#if defined (USE_STM322xG_EVAL)
  STM322xG_LCD_Init();
#elif defined(USE_STM324xG_EVAL)
  STM324xG_LCD_Init();
#elif defined (USE_STM3210C_EVAL)
  STM3210C_LCD_Init();
#else
 #error "Missing define: Evaluation board (ie. USE_STM322xG_EVAL)"
#endif
  
  LCD_LOG_Init();
  
#ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS DFU Device");
#else
  LCD_LOG_SetHeader(" USB OTG FS DFU Device");
#endif
  
  LCD_UsrLog("> USB device library started.\n"); 
  LCD_LOG_SetFooter ("     USB Device Library v1.1.0" ); 
  
  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 30, USER_INFORMATION1);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR);
}
Пример #17
0
/**
  * @brief  LCD Log demo 
  * @param  None
  * @retval None
  */
void Log_demo(void)
{ 
  JOYState_TypeDef JoyState = JOY_NONE;
  uint8_t i = 0;
  
  /* Wait For User inputs */
  while(CheckForUserInput() == 0);
  
  BSP_JOY_Init(JOY_MODE_GPIO);
  
  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Log Example");
  LCD_LOG_SetFooter((uint8_t *)"Use Joystick to scroll up/down");
  
  /* Output User logs */
  for (i = 0; i < 10; i++)
  {
    LCD_UsrLog ("This is Line %d \n", i);
  }
  
  HAL_Delay(2000);
  
  /* Clear Old logs */
  LCD_LOG_ClearTextZone();
  
  /* Output new user logs */
  for (i = 0; i < 30; i++)
  {
    LCD_UsrLog ("This is Line %d \n", i);
  }
  
  /* Check for joystick user input for scroll (back and forward) */
  while (1)
  {
    JoyState = BSP_JOY_GetState();
    switch(JoyState)
    {
    case JOY_UP:
      LCD_LOG_ScrollBack();
      break;
      
    case JOY_DOWN:
      LCD_LOG_ScrollForward();
      break;          
      
    default:
      break;           
    }
    if(CheckForUserInput() > 0)
    {
      return;
    }    
    HAL_Delay (10);
  }
}
Пример #18
0
/**
  * @brief  Audio Application Init.
  * @param  None
  * @retval None
  */
static void AUDIO_InitApplication(void)
{
  uint8_t  lcd_status = LCD_OK;

  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure the LED1, LED2, LED3 and LED4 */
  BSP_IO_Init();
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Initialize the SDRAM */
  if (BSP_SDRAM_Init() != SDRAM_OK)
  {
    /* User can add here some code to deal with this error */
    while (1)
    {
    }
  }

  /* Initialize and start the LCD display in mode 'lcd_mode'
   *  Using LCD_FB_START_ADDRESS as frame buffer displayed contents.
   *  This buffer is modified by the BSP (draw fonts, objects depending on BSP calls).
   */

  /* Set Portrait orientation if needed, by default orientation is set to
     Landscape */
  
  /* Initialize DSI LCD */
  //  BSP_LCD_InitEx(LCD_ORIENTATION_PORTRAIT); /* uncomment if Portrait orientation is needed */
  BSP_LCD_Init(); /* Uncomment if default config (landscape orientation) is needed */
  while(lcd_status != LCD_OK);

  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);   
  BSP_LCD_SelectLayer(0);
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)"Audio Playback and Record Application");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio interface */
  USBH_UsrLog("Starting Audio Demo");
  
  /* Init Audio interface */
  AUDIO_PLAYER_Init();
  
  /* Start Audio interface */
  AUDIO_MenuInit();
}
Пример #19
0
/**
  * @brief  Audio Application Init.
  * @param  None
  * @retval None
  */
static void AUDIO_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure IO and LED1 */
  BSP_IO_Init();
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED4);
 
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Camera has to be powered down as some signals use same GPIOs between
   * I2S signals and camera bus. Camera drives its signals to low impedance
   * when powered ON. So the camera is powered off to let its signals
   * in high impedance */

  /* Camera power down sequence */
  BSP_IO_ConfigPin(RSTI_PIN, IO_MODE_OUTPUT);
  BSP_IO_ConfigPin(XSDN_PIN, IO_MODE_OUTPUT);

  /* De-assert the camera STANDBY pin (active high) */
  BSP_IO_WritePin(XSDN_PIN, BSP_IO_PIN_RESET);

  /* Assert the camera RSTI pin (active low) */
  BSP_IO_WritePin(RSTI_PIN, BSP_IO_PIN_RESET);

  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)"Audio Playback and Record Application");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio interface */
  USBH_UsrLog("Starting Audio Demo");
  
  /* Init Audio interface */
  AUDIO_PLAYER_Init();
  
  /* Start Audio interface */
  AUDIO_MenuInit();
}
Пример #20
0
/**
  * @brief  Image browser
  * @param  path: pointer to root path
  * @retval None
  */
static uint8_t Image_Browser(char *path)
{
  FRESULT res;
  uint8_t ret = 1;
  FILINFO fno;
  DIR dir;
  char *fn;
  
  res = f_opendir(&dir, path);
  if (res != FR_OK) 
  {
    Error_Handler();
  }
  else
  {    
    for (;;) {
      res = f_readdir(&dir, &fno);
      if (res != FR_OK || fno.fname[0] == 0) break;
      if (fno.fname[0] == '.') continue;
      
      fn = fno.fname;
      
      if (fno.fattrib & AM_DIR) 
      {
        continue;
      } 
      else 
      {
        if((strstr(fn, "bmp")) || (strstr(fn, "BMP")))
        {
          res = f_open(&file, fn, FA_OPEN_EXISTING | FA_READ);
          Show_Image();
          USBH_Delay(100);
          ret = 0;
          while((Appli_state == APPLICATION_START) && \
            (BSP_PB_GetState (BUTTON_KEY) != SET))
          {
            Toggle_Leds();
          }
          f_close(&file);
          
        }
      }
    }  
  }
  
    /* LCD Log initialization */
  LCD_LOG_Init(); 

  LCD_LOG_SetHeader((uint8_t *)"LTDC Application"); 
  LCD_LOG_SetFooter ((uint8_t *)"     USB Host Library V3.2.0" );
  USBH_USR_ApplicationState = USH_USR_FS_READLIST;
  
  f_closedir(&dir);
  return ret;
}
Пример #21
0
/**
  * @brief  Program entry point
  * @param  None
  * @retval None
*/
int main(void)
{
  /*!< At this stage the microcontroller clock setting is already configured, 
  this is done through SystemInit() function which is called from startup
  file (startup_stm32fxxx_xx.s) before to branch to application main.
  To reconfigure the default setting of SystemInit() function, refer to
  system_stm32fxxx.c file
  */  
  
  /* Initialize the LCD */
  STM32f4_Discovery_LCD_Init();

  LCD_LOG_Init();
  
  LCD_LOG_SetHeader(" Binary image template ");
  LCD_UsrLog("> Systick template example started.\n"); 
  LCD_LOG_SetFooter ("     Binary image template " ); 
  
  /* Configure the LEDs */
  STM_EVAL_LEDInit(LED4);  

   /* Set the Vector Table base location at the application start address
      (this is already done in system_stm32fxxx.c file) */   
//#ifdef STM32F2XX
//  /* Set the Vector Table base location at 0xC000 */ 
//  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0xC000);
//#elif defined(STM32F4XX)
//  /* Set the Vector Table base location at 0xC000 */ 
//  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0xC000);
//#elif defined(STM32F10X_CL)
//  /* Set the Vector Table base location at 0x8000 */ 
//  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x8000);
//#endif /* STM32F2XX */
  
  /* SysTick end of count event each 10ms */
  RCC_GetClocksFreq(&RCC_Clocks);
  SysTick_Config(RCC_Clocks.HCLK_Frequency / 1000);  
  
  while (1)
  {
    /* Toggle all leds */
    STM_EVAL_LEDToggle(LED4);
    
    /* Insert 200 ms delay */
    Delay(200);
    
    /* Toggle all leds */
    STM_EVAL_LEDToggle(LED4);
    
    /* Insert 200 ms delay */
    Delay(200);
  }
} 
Пример #22
0
/**
  * @brief  Initializes the STM324x9I-EVAL's LCD and LEDs resources.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{
#ifdef USE_LCD
  uint8_t lcd_status = LCD_OK;
#endif /* USE_LCD */


  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Init MFX IO Expander */
  BSP_IO_Init();
  
  /* Enable MFX IO Expander interrupt for ETH MII pin */
  BSP_IO_ConfigPin(MII_INT_PIN, IO_MODE_IT_FALLING_EDGE);
  
#ifdef USE_LCD

  /* Initialize and start the LCD display in mode 'lcd_mode'
   *  Using LCD_FB_START_ADDRESS as frame buffer displayed contents.
   *  This buffer is modified by the BSP (draw fonts, objects depending on BSP calls).
   */

  /* Set Portrait orientation if needed, by default orientation is set to
     Landscape */
  
  /* Initialize DSI LCD */
  //  BSP_LCD_InitEx(LCD_ORIENTATION_PORTRAIT); /* uncomment if Portrait orientation is needed */
  BSP_LCD_Init(); /* Uncomment if default config (landscape orientation) is needed */
  while(lcd_status != LCD_OK);

  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);   
  
  BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
  
  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Webserver Application Netconn API");
  LCD_LOG_SetFooter((uint8_t *)"STM32469I-EVAL board");
  
  LCD_UsrLog ((char *)"  State: Ethernet Initialization ...\n");

#endif /* USE_LCD */
}
/**
  * @brief  CDC application Init.
  * @param  None
  * @retval None
  */
static void CDC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI); 
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS CDC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS CDC Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start CDC Interface */
  USBH_UsrLog("Starting CDC Demo");
  
  Menu_Init();
  /* Initialize microSD */
  if (SD_StorageInit() == 0)
  {
    SD_StorageParse();
  }
}
Пример #24
0
int main(void)
{
  extern uint32_t SystemCoreClock;

  //HAL init, etc
  common_init();

  //System clock config (200 MHz)
  SystemClock_Config();

  //LCD, SDRAM, DMA2D init.
  lcd_init();

  LCD_LOG_Init();
  LCD_LOG_SetHeader( ( uint8_t* )"LCD LOG" );
  LCD_UsrLog( "LOG is ready\n" );
  LCD_UsrLog( "MCU runs at %lu MHz\n", SystemCoreClock / 1000000 );

  LCD_UsrLog( "Define threads\n" );

  //Init on BTN pressed
  if( BSP_PB_GetState( BUTTON_KEY ) )
  {
    //KEY pressed
    LCD_UsrLog( "AF\n" );

    LCD_UsrLog( "Done!\n" );
    while(1)
    {
      //Do nothing
    }
  }
  else
  {
    //Normal mode
  }

  LCD_UsrLog( "Create threads\n" );
  tasks_init();
  

  LCD_UsrLog( "Starting OS kernel...\n" );
  osKernelStart();

  return 0;
}
Пример #25
0
/**
  * @brief  MTP application Init.
  * @param  None
  * @retval None
  */
static void MTP_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialisation */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /*Selects the LCD Layer*/
  BSP_LCD_SelectLayer(1);
  
  /*Enables the display*/
  BSP_LCD_DisplayOn();
  
  /*Init the LCD Log module*/
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MTP Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MTP Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MTP Interface */
  USBH_UsrLog("Starting MTP Demo");
  
  /* Init Audio interface */
  AUDIO_Init();
  
  /* Start MTP Interface */
  MTP_MenuInit();
}
Пример #26
0
/**
* @brief  USBH_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;  
  
  if(startup == 0 )
  {
    startup = 1;
    /* Configure the LEDs */
    STM_EVAL_LEDInit(LED3); 
    STM_EVAL_LEDInit(LED4); 
    
    STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_GPIO);
       
    /* Initialize the LCD */
    LCD_Init();
    LCD_LayerInit();
    
    /* Set LCD background layer */
    LCD_SetLayer(LCD_BACKGROUND_LAYER);
    
    /* Set LCD transparency */
    LCD_SetTransparency(0);
    
    /* Set LCD foreground layer */
    LCD_SetLayer(LCD_FOREGROUND_LAYER);
    
    /* LTDC reload configuration */  
    LTDC_ReloadConfig(LTDC_IMReload);
    
    /* Enable the LTDC */
    LTDC_Cmd(ENABLE);
    
    /* LCD Log initialization */
    LCD_LOG_Init(); 
    
    
#ifdef USE_USB_OTG_HS 
    LCD_LOG_SetHeader("PDF Create");
#else
    LCD_LOG_SetHeader(" USB OTG FS MSC Host");
#endif
    LCD_UsrLog("> USB Host library started.\n"); 
    LCD_LOG_SetFooter ("     USB Host Library v2.1.0" );
  }
}
Пример #27
0
/**
  * @brief  LCD configuration.
  * @param  None
  * @retval None
  */
static void LCD_Config(void)
{
  /* LCD Initialization */ 
  BSP_LCD_Init();

  /* LCD Layers Initialization */ 
  BSP_LCD_LayerDefaultInit(LCD_FOREGROUND_LAYER, (LCD_FRAME_BUFFER + BUFFER_OFFSET));
  
  /* Configure the transparency for foreground : Increase the transparency */
  BSP_LCD_SetTransparency(LCD_BACKGROUND_LAYER, 0);
  BSP_LCD_SelectLayer(LCD_FOREGROUND_LAYER);

  /* LCD Log initialization */
  LCD_LOG_Init(); 

  LCD_LOG_SetHeader((uint8_t *)"LTDC Application");
  LCD_UsrLog("> USB Host library started.\n"); 
  LCD_LOG_SetFooter ((uint8_t *)"     USB Host Library V3.2.0" );
}
Пример #28
0
/**
  * @brief  LCD Log demo 
  * @param  None
  * @retval None
  */
void Log_demo(void)
{ 
  uint8_t i = 0;

  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t*)"This is the header");
  LCD_LOG_SetFooter((uint8_t*)"This is the footer");
  
  /* Wait For User inputs */
  while(CheckForUserInput() == 0);
  
  /* Output User logs */
  for (i = 0; i < 10; i++)
  {
    LCD_UsrLog ("This is Line %d \n", i);
    HAL_Delay(100);
  }
  
  HAL_Delay(1500);
  
   /* Clear Old logs */
  LCD_LOG_ClearTextZone();
  
   /* Output new user logs */
  for (i = 0; i < 30; i++)
  {
    LCD_UsrLog ("This is Line %d \n", i);
    HAL_Delay(100);
  }
  
  /* Check for joystick user input for scroll (back and forward) */
  while (1)
  {
    if(CheckForUserInput() > 0)
    {
      return;
    }    
    HAL_Delay (10);
  }
}
Пример #29
0
/**
  * @brief  Audio Application Init.
  * @param  None
  * @retval None
  */
static void AUDIO_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)"Audio Playback and Record Application");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio interface */
  USBH_UsrLog("Starting Audio Demo");
  
  /* Init Audio interface */
  AUDIO_PLAYER_Init();
  
  /* Start Audio interface */
  AUDIO_MenuInit();
}
Пример #30
0
/**
  * @brief  LCD Log demo 
  * @param  None
  * @retval None
  */
void Log_demo(void)
{ 
  uint8_t i = 0;

  /* Wait For User inputs */
  while(CheckForUserInput() == 0);
  
  BSP_JOY_Init(JOY_MODE_GPIO);
  
  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Log Example");
  
  /* Output User logs */
  for (i = 0; i < 10; i++)
  {
    LCD_UsrLog ("This is Line %d \n", i);
  }
  
  HAL_Delay(2000);
  
   /* Clear Old logs */
  LCD_LOG_ClearTextZone();
  
   /* Output new user logs */
  for (i = 0; i < 30; i++)
  {
    LCD_UsrLog ("This is Line %d \n", i);
  }
  
  while (1)
  {
    if(CheckForUserInput() > 0)
    {
      return;
    }    
    HAL_Delay (10);
  }
}