//------------HotPotato_DrawStatus------------
// Draws p1 status elements on the top of the screen
// Input: none
// Output: none
void HotPotato_DrawStatus(void){
ST7735_SetCursor(16, 1);
LCD_OutDec(Characters[0].hp/hpDivisor); // Write hp status
if(Characters[0].hp == 0){ // Write death status
ST7735_SetCursor(6, 5);
ST7735_OutString("You Dead.");
Music_Stop();
}
int temp=0;
for(int i = 0; i<characterCount; i++) // get count on players alive @@@ TEMP ADD FOR CHECK OUT
if(Characters[i].active){
temp++;
}
if(Characters[0].potato){ // Write "it" status
ST7735_SetCursor(16, 2);
ST7735_OutString("It!");
ST7735_DrawBitmap(110, 17, Sprite[smallPotato].array, 8,8);
if(temp==1)
{
ST7735_SetCursor(6, 5);
ST7735_OutString("You Win!"); // write win status
Music_Stop();
Characters[0].hp++;
}
}
else{ // Write "not-it" status
ST7735_SetCursor(14, 2);
ST7735_OutString("Not it");
}
}
int main(void){
TExaS_Init(SSI0_Real_Nokia5110_Scope); // set system clock to 80 MHz
Random_Init(1);
Output_Init();
ST7735_FillScreen(0x0000); // set screen to black
ST7735_DrawBitmap(52, 159, PlayerShip0, 18,8); // player ship middle bottom
ST7735_DrawBitmap(53, 151, Bunker0, 18,5);
ST7735_DrawBitmap(0, 9, SmallEnemy10pointA, 16,10);
ST7735_DrawBitmap(20,9, SmallEnemy10pointB, 16,10);
ST7735_DrawBitmap(40, 9, SmallEnemy20pointA, 16,10);
ST7735_DrawBitmap(60, 9, SmallEnemy20pointB, 16,10);
ST7735_DrawBitmap(80, 9, SmallEnemy30pointA, 16,10);
ST7735_DrawBitmap(100, 9, SmallEnemy30pointB, 16,10);
Delay100ms(50); // delay 5 sec at 80 MHz
ST7735_FillScreen(0x0000); // set screen to black
ST7735_SetCursor(1, 1);
ST7735_OutString("GAME OVER");
ST7735_SetCursor(1, 2);
ST7735_OutString("Nice try,");
ST7735_SetCursor(1, 3);
ST7735_OutString("Earthling!");
ST7735_SetCursor(2, 4);
LCD_OutDec(1234);
while(1){
}
}
int main2(void){
TExaS_Init(); // Bus clock is 80 MHz
ADC_Init(); // turn on ADC, set channel to 1
PortF_Init();
ST7735_InitR(INITR_REDTAB);
while(1){ // use scope to measure execution time for ADC_In and LCD_OutDec
PF2 = 0x04; // Profile ADC
Data = ADC_In(); // sample 12-bit channel 1
PF2 = 0x00; // end of ADC Profile
ST7735_SetCursor(0,0);
PF1 = 0x02; // Profile LCD
LCD_OutDec(Data);
ST7735_OutString(" "); // these spaces are used to coverup characters from last output
PF1 = 0; // end of LCD Profile
}
}
//------------HotPotato_DrawStatus------------
// Draws p1 status elements on the top of the screen
// Input: none
// Output: none
void HotPotato_DrawStatus(void){
ST7735_SetCursor(16, 1);
LCD_OutDec(Characters[0].hp/2); // Write hp status
if(Characters[0].hp == 0){ // Write death status
ST7735_SetCursor(6, 5);
ST7735_OutString("You Dead.");
}
if(Characters[0].potato){ // Write "it" status
ST7735_SetCursor(16, 2);
ST7735_OutString("It!");
ST7735_DrawBitmap(110, 16, Sprite[smallPotato].array, 8,8);
}
else{ // Write "not-it" status
ST7735_SetCursor(14, 2);
ST7735_OutString("Not it");
}
}
int main(void){
TExaS_Init();
ST7735_InitR(INITR_REDTAB);
PortF_Init();
ADC_Init(); // turn on ADC, set channel to 1
SysTick_Init(); // This makes things work
// your Lab 8
while(1){
while(ADCStatus == 0){}
Data = ADCMail;
Position = Convert(Data);
ST7735_SetCursor(0,0);
LCD_OutDec(Data); ST7735_OutString(" ");
ST7735_SetCursor(6,0);
LCD_OutFix(Position);
ADCStatus = 0;
}
}
int main3(void){
TExaS_Init(); // Bus clock is 80 MHz
PortF_Init();
ADC_Init(); // turn on ADC, set channel to 1
ST7735_InitR(INITR_REDTAB);
while(1){
PF2 ^= 0x04; // Heartbeat
Data = ADC_In(); // sample 12-bit channel 1
PF3 = 0x08; // Profile Convert
Position = Convert(Data);
PF3 = 0; // end of Convert Profile
PF1 = 0x02; // Profile LCD
ST7735_SetCursor(0,0);
LCD_OutDec(Data); ST7735_OutString(" ");
ST7735_SetCursor(6,0);
LCD_OutFix(Position);
PF1 = 0; // end of LCD Profile
}
}
int main(void){
uint32_t DataTaken;
uint32_t ConvData;
TExaS_Init(); // Bus clock is 80 MHz
PortF_Init();
ADC_Init(); // turn on ADC, set channel to 1
ST7735_InitR(INITR_REDTAB);
SysTick_Init();
while(1){
if (ADCStatus == 1){
DataTaken = ADCMail;
ADCStatus = 0;
ConvData = Convert(DataTaken);
ST7735_SetCursor(0,0);
LCD_OutDec(DataTaken);
ST7735_OutString(" ");
ST7735_SetCursor(6,0);
LCD_OutFix(ConvData);
ST7735_OutString(" cm");
}
}
}
