/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_MULTIBUF_Config(NUM_BUFFERS);
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS);
}
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
//
// Set display driver and color conversion
//
pDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Common display driver configuration
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS);
}
//
// Setup hardware access routines
//
#ifndef WIN32
_PortAPI.pfWrite16_A0 = LCD_X_SPI4_16_Write0;
_PortAPI.pfWrite16_A1 = LCD_X_SPI4_16_Write1;
_PortAPI.pfWriteM16_A1 = LCD_X_SPI4_16_WriteM1;
GUIDRV_IST3088_SetBus16(pDevice, &_PortAPI);
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
GUI_PORT_API PortAPI = {0};
CONFIG_FLEXCOLOR Config = {0};
#if (NUM_BUFFERS > 1)
GUI_MULTIBUF_Config(NUM_BUFFERS);
#endif
//
// Set display driver and color conversion for 1st layer
//
pDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Common display driver configuration
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS * NUM_VSCREENS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS * NUM_VSCREENS);
}
//
// Configuration of GUIDRV_FLEX_COLOR
//
//
// Select hardware interface
//
GUIDRV_FlexColor_SetReadFunc66712_B16(pDevice, GUIDRV_FLEXCOLOR_READ_FUNC_II);
//
// Set controller and operation mode
//
PortAPI.pfWrite16_A0 = LCD_X_Write0_16;
PortAPI.pfWrite16_A1 = LCD_X_Write1_16;
PortAPI.pfWriteM16_A1 = LCD_X_WriteM1_16;
PortAPI.pfReadM16_A1 = LCD_X_ReadM1_16;
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66712, GUIDRV_FLEXCOLOR_M16C0B16);
//
// Orientation and offset of SEG/COM lines
//
Config.Orientation = DISPLAY_ORIENTATION;
Config.RegEntryMode = 0;
GUIDRV_FlexColor_Config(pDevice, &Config);
#if (USE_TOUCH == 1)
//
// Set orientation of touch screen
//
GUI_TOUCH_SetOrientation(DISPLAY_ORIENTATION);
//
// Calibrate touch screen
//
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, WIDTH - 1, TOUCH_LEFT, TOUCH_RIGHT);
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, HEIGHT - 1, TOUCH_TOP, TOUCH_BOTTOM);
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
/********************************************************************************************************/
{
lcd_info.fd = open("/dev/fb0", O_RDWR, 0666);
if (lcd_info.fd < 0) {
GUI_X_ErrorOut("emWin failed to open framebuffer device: \"/dev/fb0\", serious error\n");
/*
* TODO: 出错处理
*/
}
ioctl(lcd_info.fd, FBIOGET_VSCREENINFO, &lcd_info.var);
ioctl(lcd_info.fd, FBIOGET_FSCREENINFO, &lcd_info.fix);
/*
* TODO: 这两个值的设置
*/
COLOR_CONVERSION = GUICC_M565;
DISPLAY_DRIVER = GUIDRV_LIN_16;
}
/********************************************************************************************************/
//
// At first initialize use of multiple buffers on demand
//
#if (NUM_BUFFERS > 1)
GUI_MULTIBUF_Config(NUM_BUFFERS);
#endif
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_VIRT, XSIZE_VIRT);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_VIRT, YSIZE_VIRT);
}
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
}
/*
****************************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
****************************************************************************
*/
void LCD_X_Config(void)
{
/* 读取EEPROM中的参数 */
ee_ReadBytes((uint8_t *)&g_tTPSL, 1024, sizeof(g_tTPSL));
/* Set display driver and color conversion for 1st layer */
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
if (g_ChipID == IC_8875)
{
if (g_ucGPIX == 1) /* GPIX = 1 4.3 480x272 */
{
/* Display driver configuration */
LCD_SetSizeEx (0, 480, 272);
LCD_SetVSizeEx (0, 480, 272);
/* Touch calibration */
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 479, g_tTPSL.usAdcX1, g_tTPSL.usAdcX2);
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 271, g_tTPSL.usAdcY1, g_tTPSL.usAdcY2);
/* 查看是否需要切换X,Y*/
if(g_tTPSL.XYChange == 1)
{
GUI_TOUCH_SetOrientation(GUI_SWAP_XY);
}
}
else /* GPIX = 0 7 800*480 */
{
/* Display driver configuration */
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx (0, VXSIZE_PHYS, VYSIZE_PHYS);
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, XSIZE_PHYS - 1, g_tTPSL.usAdcX1, g_tTPSL.usAdcX2);
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, YSIZE_PHYS - 1, g_tTPSL.usAdcY1, g_tTPSL.usAdcY2);
/* 查看是否需要切换X,Y*/
if(g_tTPSL.XYChange == 1)
{
GUI_TOUCH_SetOrientation(GUI_SWAP_XY);
}
}
}
else
{
LCD_SetSizeEx (0, 400, 240);
LCD_SetVSizeEx (0, 400, 240);
/* Touch calibration */
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 399, 300, 3600);
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 239, 273, 3671);
}
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_MULTIBUF_Config(NUM_BUFFERS);
//
// Set display driver and color conversion for 1st layer
//
guiDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS);
}
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
#ifdef LCD_DEVFUNC_CONTRADDR
if(guiDevice)
{ void (* pSetControllerAddress) (GUI_DEVICE *, uint32_t reg, uint32_t data);
/* now let's take function for setting controller address */
pSetControllerAddress = (void (*) (GUI_DEVICE *, uint32_t, uint32_t))guiDevice->pDeviceAPI->pfGetDevFunc(&guiDevice, LCD_DEVFUNC_CONTRADDR);
/* and configure addresses - for writing register and data */
pSetControllerAddress(guiDevice, BC_SSD2119_BASE, BC_SSD2119_BASE + 2);
}
#endif
/* example how to disable default controller initialization function */
#ifdef removeit_LCD_DEVFUNC_INITIALIZE
if(guiDevice)
{ void (* pSetFunc) (GUI_DEVICE *, int, void (*)(void));
/* now let's take function for changing functions in driver */
pSetFunc = (void (*) (GUI_DEVICE *, int, void (*)(void)))guiDevice->pDeviceAPI->pfGetDevFunc(&guiDevice, LCD_DEVFUNC_SETFUNC);
/* and replace initialization function. It is possible to remove */
/* initialization function by giving null instead of new function pointer */
pSetFunc(guiDevice, LCD_DEVFUNC_INITIALIZE, (void (*)(void))yourInitFunction);
}
#endif
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Function description:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
CONFIG_FLEXCOLOR Config = {0};
GUI_PORT_API PortAPI = {0};
//
// Set display driver and color conversion
//
pDevice = GUI_DEVICE_CreateAndLink(GUIDRV_FLEXCOLOR, GUICC_565, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
LCD_SetSizeEx (0, XSIZE_PHYS , YSIZE_PHYS);
LCD_SetVSizeEx(0, VXSIZE_PHYS, VYSIZE_PHYS);
//
// Orientation
//
Config.FirstCOM = 0; //modify by fire
Config.FirstSEG = 0; //modify by fire
Config.Orientation = GUI_MIRROR_Y|GUI_MIRROR_X; //modify by fire 竖屏
// Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y; //modify by fire 横屏
Config.NumDummyReads = 2; //modify by fire 读取的第二个数据才是真实数据
GUIDRV_FlexColor_Config(pDevice, &Config);
//
// Set controller and operation mode
//
PortAPI.pfWrite16_A0 = LcdWriteReg;
PortAPI.pfWrite16_A1 = LcdWriteData;
PortAPI.pfWriteM16_A1 = LcdWriteDataMultiple;
PortAPI.pfReadM16_A1 = LcdReadDataMultiple;
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66709, GUIDRV_FLEXCOLOR_M16C0B16); //modify by fire ԭGUIDRV_FLEXCOLOR_F66708
}
/*********************************************************************
*
* LCD_X_Config
*
* Function description:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
CONFIG_FLEXCOLOR Config = {0};
GUI_PORT_API PortAPI = {0};
//
// Set display driver and color conversion
//
pDevice = GUI_DEVICE_CreateAndLink(GUIDRV_FLEXCOLOR, GUICC_565, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
LCD_SetSizeEx (0, XSIZE_PHYS , YSIZE_PHYS);
LCD_SetVSizeEx(0, VXSIZE_PHYS, VYSIZE_PHYS);
//
// Orientation
//
//Config.Orientation = GUI_MIRROR_X;
Config.RegEntryMode = 0x6230;
GUIDRV_FlexColor_Config(pDevice, &Config);
//
// Set controller and operation mode
//
PortAPI.pfWrite16_A0 = LcdWriteReg;
PortAPI.pfWrite16_A1 = LcdWriteData;
PortAPI.pfWriteM16_A1 = LcdWriteDataMultiple;
PortAPI.pfReadM16_A1 = LcdReadDataMultiple;
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66714, GUIDRV_FLEXCOLOR_M16C0B16);
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
CONFIG_FLEXCOLOR Config = {0};
GUI_PORT_API PortAPI = {0};
//
// Set display driver and color conversion
//
pDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx (0, VXSIZE_PHYS, VYSIZE_PHYS);
//
// Orientation
//
Config.Orientation = GUI_MIRROR_X | GUI_SWAP_XY;
GUIDRV_FlexColor_Config(pDevice, &Config);
//
// Set controller and operation mode
//
PortAPI.pfWrite16_A0 = LCD_X_8080_16_Write00_16;
PortAPI.pfWrite16_A1 = LCD_X_8080_16_Write01_16;
PortAPI.pfWriteM16_A1 = LCD_X_8080_16_WriteM01_16;
PortAPI.pfReadM16_A1 = LCD_X_8080_16_ReadM01_16;
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66708, GUIDRV_FLEXCOLOR_M16C0B16);
}
/*********************************************************************
*
* LCD_X_Config
*
* Function description:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
CONFIG_FLEXCOLOR Config = {0};
GUI_PORT_API PortAPI = {0};
//
// Set display driver and color conversion
//
pDevice = GUI_DEVICE_CreateAndLink(GUIDRV_FLEXCOLOR, GUICC_565, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
LCD_SetSizeEx (0, XSIZE_PHYS , YSIZE_PHYS);
LCD_SetVSizeEx(0, VXSIZE_PHYS, VYSIZE_PHYS);
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 240, TOUCH_AD_TOP, TOUCH_AD_BOTTOM);
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 320, TOUCH_AD_LEFT, TOUCH_AD_RIGHT);
//
// Orientation
//配置显示屏的方向
//Config.Orientation = GUI_SWAP_XY|GUI_MIRROR_Y;// GUI_SWAP_XY | GUI_MIRROR_Y;
GUIDRV_FlexColor_Config(pDevice, &Config);
//
// Set controller and operation mode
//
PortAPI.pfWrite16_A0 = LcdWriteReg;
PortAPI.pfWrite16_A1 = LcdWriteData;
PortAPI.pfWriteM16_A1 = LcdWriteDataMultiple;
PortAPI.pfReadM16_A1 = LcdReadDataMultiple;
//配置总线,缓存,和硬件程序 5.22手册991页有详细解说所支持的控制器
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66709, GUIDRV_FLEXCOLOR_M16C0B16);
}
static void _InitController(unsigned LayerIndex) {
//
// Set display size and video-RAM address
//
LCD_SetSizeEx (XSIZE_PHYS, YSIZE_PHYS, LayerIndex);
LCD_SetVSizeEx(VXSIZE_PHYS, VYSIZE_PHYS, LayerIndex);
LCD_SetVRAMAddrEx(LayerIndex, (void*)LCD_VRAM_BASE_ADDR);
//
// Init LCD
//
#if GUI_SUPPORT_TOUCH // Used when touch screen support is enabled
{
U32 TouchOrientation;
TouchOrientation = (GUI_MIRROR_X * LCD_GetMirrorXEx(0)) |
(GUI_MIRROR_Y * LCD_GetMirrorYEx(0)) |
(GUI_SWAP_XY * LCD_GetSwapXYEx (0)) ;
GUI_TOUCH_SetOrientation(TouchOrientation);
if (LCD_GetSwapXYEx(0)) {
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, XSIZE_PHYS, TOUCH_AD_LEFT, TOUCH_AD_RIGHT); // x axis swapped
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, YSIZE_PHYS, TOUCH_AD_TOP , TOUCH_AD_BOTTOM); // y axis swapped
} else {
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, XSIZE_PHYS, TOUCH_AD_LEFT, TOUCH_AD_RIGHT); // x axis
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, YSIZE_PHYS, TOUCH_AD_TOP , TOUCH_AD_BOTTOM); // y axis
}
}
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
CONFIG_S1D13781 Config;
#ifndef WIN32
GUI_PORT_API PortAPI = {0};
#endif
//
// Initialize multibuffering
//
GUI_MULTIBUF_Config(NUM_BUFFERS);
//
// Setup port routines
//
#ifndef WIN32
PortAPI.pfWriteM8_A1 = _WriteM8_A1;
PortAPI.pfReadM8_A1 = _ReadM8_A1;
PortAPI.pfSetCS = _SetCS;
#endif
//
// Set display driver and color conversion for 1st layer
//
pDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0); {
//
// Common display driver configuration
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS);
}
//
// Driver configuration
//
#ifndef WIN32
GUIDRV_S1D13781_SetBusSPI(pDevice, &PortAPI);
#endif
Config.BufferOffset = 0;
Config.WriteBufferSize = 320 + 5;
Config.UseLayer = 0;
Config.WaitUntilVNDP = 1;
GUIDRV_S1D13781_Config(pDevice, &Config);
}
}
void LCD_X_Config(void) {
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(&GUIDRV_Template_API, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS);
}
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
CONFIG_SPAGE Config = {0};
GUI_DEVICE * pDevice;
#ifndef WIN32
GUI_PORT_API PortAPI = {0};
#endif
//
// Set display driver and color conversion for 1st layer
//
pDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display size configuration
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, VYSIZE_PHYS, VXSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, VXSIZE_PHYS, VYSIZE_PHYS);
}
//
// Driver configuration
//
Config.FirstSEG = 0;
Config.FirstCOM = 0;
GUIDRV_SPage_Config(pDevice, &Config);
//
// Configure hardware routines
//
#ifndef WIN32
PortAPI.pfWrite8_A0 = LCD_X_8080_8_Write00;
PortAPI.pfWrite8_A1 = LCD_X_8080_8_Write01;
PortAPI.pfWriteM8_A0 = LCD_X_8080_8_WriteM00;
PortAPI.pfWriteM8_A1 = LCD_X_8080_8_WriteM01;
PortAPI.pfRead8_A0 = LCD_X_8080_8_Read00;
PortAPI.pfRead8_A1 = LCD_X_8080_8_Read01;
PortAPI.pfReadM8_A0 = LCD_X_8080_8_ReadM00;
PortAPI.pfReadM8_A1 = LCD_X_8080_8_ReadM01;
GUIDRV_SPage_SetBus8(pDevice, &PortAPI);
#endif
//
// Controller configuration
//
GUIDRV_SPage_Set1512(pDevice);
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
CONFIG_SLIN Config = {0};
//
// Set display driver and color conversion
//
pDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Common display driver configuration
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS);
}
//
// Driver specific configuration
//
Config.UseCache = 1;
GUIDRV_SLin_Config(pDevice, &Config);
//
// Select display controller
//
GUIDRV_SLin_SetS1D13700(pDevice);
//
// Setup hardware access routines
//
#ifndef WIN32
{
GUI_PORT_API PortAPI;
PortAPI.pfWrite16_A0 = _Write0;
PortAPI.pfWrite16_A1 = _Write1;
PortAPI.pfWriteM16_A0 = _WriteM0;
PortAPI.pfRead16_A1 = _Read1;
GUIDRV_SLin_SetBus8(pDevice, &PortAPI);
}
#endif
}
//配置程序,用于创建显示驱动器件,设置颜色转换程序和显示尺寸
void LCD_X_Config (void) {
GUI_MULTIBUF_ConfigEx(eLAYER_BSP, 1);
GUI_MULTIBUF_ConfigEx(eLAYER_ESP, 1);
/*BSP-------------------------------------------------------*/
GUI_DEVICE_CreateAndLink(&BSP_GUIDRV_Template_API, GUICC_M565, 0, eLAYER_BSP); //创建显示驱动器件
LCD_SetSizeEx(eLAYER_BSP, 240, 320);
LCD_SetVSizeEx(eLAYER_BSP, 240, 320);
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 240, 0, 239);
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 320, 0, 319);
/*ESP-------------------------------------------------------*/
GUI_DEVICE_CreateAndLink(&ESP_GUIDRV_Template_API, GUICC_M565, 0, eLAYER_ESP); //创建显示驱动器件
LCD_SetSizeEx(eLAYER_ESP, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(eLAYER_ESP, XSIZE_PHYS, YSIZE_PHYS);
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 480, 0, 479);
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 800, 0, 799);
}
/*********************************************************************
*
* _InitController
*
* Function description:
* Initializes the LCD controller and touch screen
*
*/
static void _InitController(unsigned LayerIndex) {
//
// Set display size and video-RAM address
//
LCD_SetSizeEx (XSIZE_PHYS, YSIZE_PHYS, LayerIndex);
LCD_SetVSizeEx(VXSIZE_PHYS, VYSIZE_PHYS, LayerIndex);
LCD_SetVRAMAddrEx(LayerIndex, (void*)LCD_VRAM_BASE_ADDR);
//
// Init LCD
//
GLCD_Init();
#if GUI_SUPPORT_TOUCH // Used when touch screen support is enabled
{
U32 TouchOrientation;
U32 pclk;
//
// Initialize touch screen
//
LPC_SC->PCONP |= (1 << 12); // Enable clock for ADC
LPC_ADC->CR = 0
| (1 << 1) // Sel AD0[1]
| (ADC_CLKDIV << 8)
| (1 << 21) // Enable ADC
;
//
// Calibrate touch
//
TouchOrientation = (GUI_MIRROR_X * LCD_GetMirrorXEx(0)) |
(GUI_MIRROR_Y * LCD_GetMirrorYEx(0)) |
(GUI_SWAP_XY * LCD_GetSwapXYEx (0)) ;
GUI_TOUCH_SetOrientation(TouchOrientation);
if (LCD_GetSwapXYEx(0)) {
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, XSIZE_PHYS, TOUCH_AD_LEFT, TOUCH_AD_RIGHT); // x axis swapped
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, YSIZE_PHYS, TOUCH_AD_TOP , TOUCH_AD_BOTTOM); // y axis swapped
} else {
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, XSIZE_PHYS, TOUCH_AD_LEFT, TOUCH_AD_RIGHT); // x axis
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, YSIZE_PHYS, TOUCH_AD_TOP , TOUCH_AD_BOTTOM); // y axis
}
//
// Start touch timer
//
LPC_SC->PCONP |= (0x1<<2);
pclk = SystemCoreClock/4;
LPC_TIM1->PR = pclk/1000000; /* Set prescaler to get 1 M counts/sec */
LPC_TIM1->MR0 = 1000 * TOUCH_TIMER_INTERVAL;
LPC_TIM1->MCR = (0x3<<0); /* Interrupt and Reset on MR0 */
NVIC_EnableIRQ(TIMER1_IRQn);
LPC_TIM1->TCR = 1; /* Enable timer 1 */
}
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Function description:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void)
{
GUI_DEVICE *pDevice;
CONFIG_FLEXCOLOR Config = {0};
GUI_PORT_API PortAPI = {0};
//
// Set display driver and color conversion
//
pDevice = GUI_DEVICE_CreateAndLink(GUIDRV_FLEXCOLOR, GUICC_565, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
LCD_SetSizeEx(0, XSIZE_PHYS , YSIZE_PHYS);
LCD_SetVSizeEx(0, VXSIZE_PHYS, VYSIZE_PHYS);
//
// Orientation
//
if (hx8347d_drv.ReadID() == HX8347D_ID)
{
Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y | GUI_MIRROR_X;
}
else if (spfd5408_drv.ReadID() == SPFD5408_ID)
{
Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y;
}
else if (ili9320_drv.ReadID() == ILI9320_ID)
{
Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y | GUI_MIRROR_X;
}
else
{
Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y | GUI_MIRROR_X;
}
GUIDRV_FlexColor_Config(pDevice, &Config);
//
// Set controller and operation mode
//
PortAPI.pfWrite16_A0 = LcdWriteReg;
PortAPI.pfWrite16_A1 = LcdWriteData;
PortAPI.pfWriteM16_A1 = LcdWriteDataMultiple;
PortAPI.pfReadM16_A1 = LcdReadDataMultiple;
// Find the current LCD and initialize GUIDRV
if (spfd5408_drv.ReadID() == SPFD5408_ID)
{
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66708, GUIDRV_FLEXCOLOR_M16C0B16);
}
else
{
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66712, GUIDRV_FLEXCOLOR_M16C0B16);
}
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
//
// At first initialize use of multiple buffers on demand
//
#if (NUM_BUFFERS > 1)
GUI_MULTIBUF_Config(NUM_BUFFERS);
#endif
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS * NUM_VSCREENS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS * NUM_VSCREENS);
}
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
//
// Set custom functions for several operations to optimize native processes
//
// LCD_SetDevFunc(0, LCD_DEVFUNC_COPYBUFFER, (void(*)(void))CUSTOM_LCD_CopyBuffer);
// LCD_SetDevFunc(0, LCD_DEVFUNC_COPYRECT, (void(*)(void))CUSTOM_LCD_CopyRect);
// LCD_SetDevFunc(0, LCD_DEVFUNC_FILLRECT, (void(*)(void))CUSTOM_LCD_FillRect);
// LCD_SetDevFunc(0, LCD_DEVFUNC_DRAWBMP_8BPP, (void(*)(void))CUSTOM_LCD_DrawBitmap8bpp);
// LCD_SetDevFunc(0, LCD_DEVFUNC_DRAWBMP_16BPP, (void(*)(void))CUSTOM_LCD_DrawBitmap16bpp);
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
/* Enable triple buffering */
GUI_MULTIBUF_Config(NUM_BUFFERS);
/* Set display driver and color conversion */
GUI_DEVICE_CreateAndLink(GUIDRV_LIN_16, GUICC_M565, 0, 0);
/* Set custom callback function for frame copy operation */
LCD_SetDevFunc(0, LCD_DEVFUNC_COPYBUFFER, (void (*)())copyBuffer);
/* Display driver configuration, required for Lin-driver */
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, LCD_HEIGHT, LCD_WIDTH);
LCD_SetVSizeEx(0, LCD_HEIGHT, LCD_WIDTH);
} else {
LCD_SetSizeEx (0, LCD_WIDTH, LCD_HEIGHT);
LCD_SetVSizeEx(0, LCD_WIDTH, LCD_HEIGHT);
}
/* Point video memory to start of PSRAM, drawing will start at frame 0 */
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR_START);
}
void LCD_X_Config(void)
{
//
// Set display driver and color conversion
//GUIDRV_LIN_24 24bpp, default orientation
//GUICC_M666, 18 bpp, red and blue swapped
GUI_DEVICE_CreateAndLink(GUIDRV_LIN_24 , // Display driver
GUICC_M666, // Color conversion
0, 0);
LCD_SetSizeEx (0, 320, 240); // Physical display size in pixels
LCD_SetVSizeEx (0, 320, 480); // Virtual display size in pixels
LCD_SetVRAMAddrEx(0, (void *)0x20000000); // Video RAM start address
}
/*********************************************************************
*
* LCD_X_Config
*
* Function description:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
CONFIG_FLEXCOLOR Config = {0};
GUI_PORT_API PortAPI = {0};
//
// Set display driver and color conversion
//
pDevice = GUI_DEVICE_CreateAndLink(GUIDRV_FLEXCOLOR, GUICC_565, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
LCD_SetSizeEx (0, XSIZE_PHYS , YSIZE_PHYS);
LCD_SetVSizeEx(0, VXSIZE_PHYS, VYSIZE_PHYS);
//
// Orientation
//
Config.FirstCOM = 0; //modify by xiaoku
Config.FirstSEG = 0; //modify by xiaoku
//Config.Orientation = GUI_MIRROR_Y|GUI_MIRROR_X; //modify by xiaoku 竖屏
// Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y; //modify by xiaoku 横屏
Config.NumDummyReads = 2; //modify by xiaoku 读取的第二个数据才是真实数据
GUIDRV_FlexColor_Config(pDevice, &Config);
//
// Set controller and operation mode
//
PortAPI.pfWrite16_A0 = LcdWriteReg;
PortAPI.pfWrite16_A1 = LcdWriteData;
PortAPI.pfWriteM16_A1 = LcdWriteDataMultiple;
PortAPI.pfReadM16_A1 = LcdReadDataMultiple;
//GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66708, GUIDRV_FLEXCOLOR_M16C0B16);
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66709, GUIDRV_FLEXCOLOR_M16C0B16); //modify by xiaoku
/* modify by fire 设置触摸原点 */
GUI_TOUCH_SetOrientation((GUI_MIRROR_X * LCD_GetMirrorXEx(0)) |
(GUI_MIRROR_Y * LCD_GetMirrorYEx(0)) |
(GUI_SWAP_XY * LCD_GetSwapXYEx (0)));
/* modify by fire 设置触摸校准 */
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 240-1,TOUCH_AD_LEFT ,TOUCH_AD_RIGHT );
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 320-1,TOUCH_AD_TOP , TOUCH_AD_BOTTOM);
}
void LCD_X_Config(void) {
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration
//
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx (0, VXSIZE_PHYS, VYSIZE_PHYS);
//
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 800-1, GUI_TOUCH_AD_LEFT ,GUI_TOUCH_AD_RIGHT );
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 480-1,GUI_TOUCH_AD_TOP ,GUI_TOUCH_AD_BOTTOM );
// GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 800-1, GUI_TOUCH_AD_LEFT ,GUI_TOUCH_AD_RIGHT );
// GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 480-1,GUI_TOUCH_AD_TOP ,GUI_TOUCH_AD_BOTTOM );
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration
//
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx (0, VXSIZE_PHYS, VYSIZE_PHYS);
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
}
//配置程序,用于创建显示驱动器件,设置颜色转换程序和显示尺寸
void LCD_X_Config(void) {
GUI_DEVICE_CreateAndLink(&GUIDRV_Template_API, GUICC_M565, 0, 0); //创建显示驱动器件
LCD_SetSizeEx (0, lcddev.width, lcddev.height);
LCD_SetVSizeEx (0, lcddev.width, lcddev.height);
if(lcddev.dir == 0) //竖屏
{ // 6368 3816
//GUI_TOUCH_SetOrientation(GUI_SWAP_XY|GUI_MIRROR_Y);
GUI_TOUCH_Calibrate(GUI_COORD_X,0,800,0,799);
GUI_TOUCH_Calibrate(GUI_COORD_Y,0,480,0,479);
}else //横屏
{
GUI_TOUCH_Calibrate(GUI_COORD_X,0,800,0,799);
GUI_TOUCH_Calibrate(GUI_COORD_Y,0,480,0,479);
}
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
int i, BitsPerPixel;
U32 Addr;
//
// Video RAM start address.
//
// This address is only required for display drivers with memory
// mapped video RAM like the LIN_xxx driver. It does not need to
// be adapted for display controllers with a simple bus interface.
//
Addr = 0x12345678;
//
// Display driver configuration
//
for (i = 0; i < GUI_COUNTOF(_aConfigPara); i++) {
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(_aConfigPara[i].pDisplayDriver, _aConfigPara[i].pColorConv, 0, i);
//
// Display driver configuration
//
LCD_SetPosEx (i, _aConfigPara[i].xPos, _aConfigPara[i].yPos);
LCD_SetSizeEx (i, _aConfigPara[i].xSize, _aConfigPara[i].ySize);
LCD_SetVSizeEx (i, _aConfigPara[i].vxSize, _aConfigPara[i].vySize);
LCD_SetVRAMAddrEx(i, (void *)Addr);
LCD_SetVisEx (i, 1);
//
// Set user palette data (only required if no fixed palette is used)
//
if (_aConfigPara[i].pPalette) {
LCD_SetLUTEx(i, _aConfigPara[i].pPalette);
}
//
// Calculate video RAM address for the following layer
//
BitsPerPixel = LCD_GetBitsPerPixelEx(i);
Addr += ((_aConfigPara[i].vxSize * BitsPerPixel) * _aConfigPara[i].vySize) / 8;
}
}
void LCD_X_Config(void)
{
// /* Set display driver and color conversion for 1st layer */
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
// if (g_ChipID == IC_8875)
// {
// if (g_ucGPIX == 1) /* GPIX = 1 4.3 480x272 */
// {
// /* Display driver configuration */
// LCD_SetSizeEx (0, 480, 272);
// LCD_SetVSizeEx (0, 480, 272);
//
// /* Touch calibration */
// GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 479, 985, 50);
// GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 271, 920, 100);
// }
// else /* GPIX = 0 7 800*480 */
// {
// /* Display driver configuration */
// LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
// LCD_SetVSizeEx (0, VXSIZE_PHYS, VYSIZE_PHYS);
// // LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
//
// /* Touch calibration */
// // GUI_TOUCH_SetOrientation(0);
// GUI_TOUCH_Calibrate(GUI_COORD_X, 0, XSIZE_PHYS - 1, GUI_TOUCH_AD_LEFT, GUI_TOUCH_AD_RIGHT);
// GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, YSIZE_PHYS - 1, GUI_TOUCH_AD_TOP, GUI_TOUCH_AD_BOTTOM);
// }
// }
// else
// {
LCD_SetSizeEx (0, 240, 128);
LCD_SetVSizeEx (0, 240, 128);
/* Touch calibration */
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, 399, 300, 3600);
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, 239, 273, 3671);
// }
}
/*********************************************************************
*
* LCD_X_Config
*
* Function description:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void)
{
GUI_DEVICE * pDevice;
CONFIG_FLEXCOLOR Config = {0};
GUI_PORT_API PortAPI = {0};
// Set display driver and color conversion
pDevice = GUI_DEVICE_CreateAndLink(GUIDRV_FLEXCOLOR, GUICC_M565, 0, 0);
// Display driver configuration, required for Lin-driver
LCD_SetSizeEx (0, XSIZE_PHYS , YSIZE_PHYS);
LCD_SetVSizeEx(0, VXSIZE_PHYS, VYSIZE_PHYS);
// Orientation
Config.Orientation = 0;//GUI_MIRROR_Y | GUI_SWAP_XY; /* swap the x & y */
GUIDRV_FlexColor_Config(pDevice, &Config);
// Set controller and operation mode
PortAPI.pfWrite16_A0 = LcdWriteReg; /* writes one 16 bit value to the controller with C/D line low */
PortAPI.pfWrite16_A1 = LcdWriteData;
PortAPI.pfWriteM16_A1 = LcdWriteDataMultiple;
PortAPI.pfReadM16_A1 = LcdReadDataMultiple;
/* F66702 supports the drive of ssd 1289 */
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66702, GUIDRV_FLEXCOLOR_M16C0B16);
}
/** Tell emWin the size of the frame buffer */
static void setFrameBufferScreenSize(void)
{
LCD_SetSizeEx (0, BUFFER_VIRTUAL_WIDTH, DISPLAY_HEIGHT);
LCD_SetVSizeEx(0, BUFFER_VIRTUAL_WIDTH, DISPLAY_HEIGHT);
}
/** Tell emWin the size of the number buffer */
static void setNumberBufferScreenSize(void)
{
LCD_SetSizeEx (0, NUMBER_BUFFER_WIDTH, FONT_HEIGHT);
LCD_SetVSizeEx(0, NUMBER_BUFFER_WIDTH, FONT_HEIGHT);
}
