C++ (Cpp) LINKTYPE примеры использования

Пример #1

Файл: dev-modem-ss222.c Проект: Startrek852/android_kernel_samsung_gardalte

#include <mach/pmu.h>
#ifdef CONFIG_REGULATOR_S2MPU01A
#include <linux/mfd/samsung/s2mpu01a.h>
#endif

#include <linux/platform_data/modem_v1.h>
#include "dev-shdmem.h"
#include "dev-modem-ss222.h"

static struct modem_io_t ss222_io_devices[] = {
	[0] = {
		.name = "umts_boot0",
		.id = 215,
		.format = IPC_BOOT,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_SHMEM),
		.app = "CBD"
	},
	[1] = {
		.name = "umts_ipc0",
		.id = 235,
		.format = IPC_FMT,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_SHMEM),
		.app = "RIL"
	},
	[2] = {
		.name = "umts_rfs0",
		.id = 245,
		.format = IPC_RAW,
		.io_type = IODEV_MISC,

Пример #2

Файл: board-u1-modems.c Проект: Ante0/xxICSKernel

#include <linux/regulator/machine.h>

#include <plat/gpio-cfg.h>

#include <linux/platform_data/modem.h>
#include <mach/sec_modem.h>
#include <linux/interrupt.h>

/* umts target platform data */
static struct modem_io_t umts_io_devices[] = {
	[0] = {
		.name = "umts_ipc0",
		.id = 0x1,
		.format = IPC_FMT,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_HSIC),
	},
	[1] = {
		.name = "umts_rfs0",
		.id = 0x41,
		.format = IPC_RFS,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_HSIC),
	},
	[2] = {
		.name = "umts_boot0",
		.id = 0x0,
		.format = IPC_BOOT,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_HSIC),
	},

Пример #3

Файл: board-c1-modems.c Проект: BigBot96/android_kernel_samsung_konawifixx

#include <plat/usb-phy.h>
#endif

static int __init init_modem(void);
static void setup_dpram_access_timing(enum dpram_speed speed);
static int host_port_enable(int port, int enable);
static int exynos_frequency_lock(struct device *dev);
static int exynos_frequency_unlock(struct device *dev);

static struct modem_io_t umts_io_devices[] = {
	[0] = {
		.name = "umts_boot0",
		.id = 0,
		.format = IPC_BOOT,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_DPRAM),
		.app = "CBD"
	},
	[1] = {
		.name = "umts_ipc0",
		.id = 235,
		.format = IPC_FMT,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_DPRAM),
		.app = "RIL"
	},
	[2] = {
		.name = "umts_rfs0",
		.id = 245,
		.format = IPC_RAW,
		.io_type = IODEV_MISC,

Пример #4

Файл: board-sprd6500-modems.c Проект: AndroidGX/SimpleGX-L-5.0.2_BOD6_G901F

#define GPIO_UART_SEL		682 /* PMA8084 GPIO_19 pin */
#define GPIO_SIM_SEL		0
/* #define ESC_SIM_DETECT_IRQ	123 */

#endif

#if defined(CONFIG_GSM_MODEM_GG_DUOS)
/* gsm target platform data */
static struct modem_io_t gsm_io_devices[] = {
	[0] = {
		.name = "gsm_boot0",
		.id = 0x1,
		.format = IPC_BOOT,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_SPI),
	},
	[1] = {
		.name = "gsm_ipc0",
		.id = 0x00,
		.format = IPC_FMT,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_SPI),
	},
	[2] = {
		.name = "umts_ipc0",
		.id = 0x01,
		.format = IPC_FMT,
		.io_type = IODEV_MISC,
		.links = LINKTYPE(LINKDEV_SPI),
	},