void snes_set_controller_port_device(bool in_port, unsigned device)
{
int port = in_port == SNES_PORT_1 ? 0 : 1;
switch (device)
{
case SNES_DEVICE_JOYPAD:
S9xSetController(port, CTL_JOYPAD, 0, 0, 0, 0);
snes_devices[port] = SNES_DEVICE_JOYPAD;
break;
case SNES_DEVICE_MULTITAP:
S9xSetController(port, CTL_MP5, 1, 2, 3, 4);
snes_devices[port] = SNES_DEVICE_MULTITAP;
break;
case SNES_DEVICE_MOUSE:
S9xSetController(port, CTL_MOUSE, 0, 0, 0, 0);
snes_devices[port] = SNES_DEVICE_MOUSE;
/* mapping pointers here */
S9xMapPointer((BTN_POINTER), S9xGetCommandT("Pointer Mouse1+Superscope+Justifier1"));
S9xMapPointer((BTN_POINTER2), S9xGetCommandT("Pointer Mouse2"));
/* mapping extra buttons here */
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_SELECT), "Mouse1 L");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_START), "Mouse1 R");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_SELECT), "Mouse2 L");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_START), "Mouse2 R");
break;
case SNES_DEVICE_SUPER_SCOPE:
S9xSetController(port, CTL_SUPERSCOPE, 0, 0, 0, 0);
snes_devices[port] = SNES_DEVICE_SUPER_SCOPE;
/* mapping pointers here */
S9xMapPointer((BTN_POINTER), S9xGetCommandT("Pointer Mouse1+Superscope+Justifier1"));
S9xMapPointer((BTN_POINTER2), S9xGetCommandT("Pointer Mouse2"));
/* mapping extra buttons here */
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_SELECT), "Superscope Fire");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_START), "Superscope Cursor");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_UP), "Superscope ToggleTurbo");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_DOWN), "Superscope Pause");
break;
case SNES_DEVICE_JUSTIFIER:
S9xSetController(port, CTL_JUSTIFIER, 0, 0, 0, 0);
snes_devices[port] = SNES_DEVICE_JUSTIFIER;
/* mapping extra buttons here */
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_SELECT), "Justifier1 Trigger");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_START), "Justifier1 Start");
break;
case SNES_DEVICE_JUSTIFIERS:
S9xSetController(port, CTL_JUSTIFIER, 1, 0, 0, 0);
snes_devices[port] = SNES_DEVICE_JUSTIFIERS;
break;
default:
fprintf(stderr, "[libsnes]: Invalid device!\n");
}
}
static void report_buttons()
{
static int frame = 0;
int _x, _y;
for (int port = SNES_PORT_1; port <= SNES_PORT_2; port++)
{
switch (snes_devices[port])
{
case SNES_DEVICE_JOYPAD:
for (int i = BTN_FIRST; i <= BTN_LAST; i++)
S9xReportButton(MAKE_BUTTON(port + 1, i), s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_JOYPAD, 0, i));
break;
case SNES_DEVICE_MULTITAP:
for (int j = 0; j < 4; j++)
for (int i = BTN_FIRST; i <= BTN_LAST; i++)
S9xReportButton(MAKE_BUTTON(j + 2, i), s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_MULTITAP, j, i));
break;
case SNES_DEVICE_MOUSE:
_x = s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_MOUSE, 0, SNES_DEVICE_ID_MOUSE_X);
_y = s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_MOUSE, 0, SNES_DEVICE_ID_MOUSE_Y);
snes_mouse_state[port][0] += _x;
snes_mouse_state[port][1] += _y;
fprintf(stderr, "Frame: %d, _x: %d, _y: %d, Mouse state: %d, %d\n", frame++, _x, _y, (int)snes_mouse_state[port][0], (int)snes_mouse_state[port][1]);
S9xReportPointer(BTN_POINTER + port, snes_mouse_state[port][0], snes_mouse_state[port][1]);
for (int i = MOUSE_LEFT; i <= MOUSE_LAST; i++)
S9xReportButton(MAKE_BUTTON(port + 1, i), s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_MOUSE, 0, i));
break;
case SNES_DEVICE_SUPER_SCOPE:
snes_scope_state[0] += s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_SUPER_SCOPE, 0, SNES_DEVICE_ID_SUPER_SCOPE_X);
snes_scope_state[1] += s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_SUPER_SCOPE, 0, SNES_DEVICE_ID_SUPER_SCOPE_Y);
S9xReportPointer(BTN_POINTER, snes_scope_state[0], snes_scope_state[1]);
for (int i = SCOPE_TRIGGER; i <= SCOPE_LAST; i++)
S9xReportButton(MAKE_BUTTON(port + 1, i), s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_SUPER_SCOPE, 0, i));
break;
case SNES_DEVICE_JUSTIFIER:
case SNES_DEVICE_JUSTIFIERS:
snes_justifier_state[0][0] += s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_JUSTIFIER, 0, SNES_DEVICE_ID_JUSTIFIER_X);
snes_justifier_state[0][1] += s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_JUSTIFIER, 0, SNES_DEVICE_ID_JUSTIFIER_Y);
S9xReportPointer(BTN_POINTER, snes_justifier_state[0][0], snes_justifier_state[0][1]);
for (int i = JUSTIFIER_TRIGGER; i <= JUSTIFIER_LAST; i++)
S9xReportButton(MAKE_BUTTON(port + 1, i), s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_JUSTIFIER, 0, i));
break;
default:
fprintf(stderr, "[libsnes]: Unknown device...\n");
}
}
}
static void report_buttons (void)
{
int i, j, _x, _y, port;
#ifdef DEBUG_CONTROLS
bool pressed_r2, pressed_l2, pressed_r3;
static unsigned timeout = TIMER_DELAY;
#endif
for ( port = 0; port <= 1; port++)
{
switch (retro_devices[port])
{
case RETRO_DEVICE_JOYPAD:
for ( i = RETRO_DEVICE_ID_JOYPAD_B; i <= RETRO_DEVICE_ID_JOYPAD_R; i++)
{
bool pressed = input_cb(port, RETRO_DEVICE_JOYPAD, 0, i);
uint16_t button_press = snes_lut[i];
if (pressed)
joypad[port] |= button_press;
else
joypad[port] &= ~button_press;
}
#ifdef DEBUG_CONTROLS
pressed_l2 = input_cb(0, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_L2);
if(pressed_l2 && timeout == 0)
{
coldata_update_screen = !coldata_update_screen;
timeout = TIMER_DELAY;
if (log_cb)
log_cb(RETRO_LOG_INFO, "coldata_update_screen: %d.\n", coldata_update_screen);
}
pressed_r2 = input_cb(0, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_R2);
if(pressed_r2 && timeout == 0)
{
PPU.RenderSub = !PPU.RenderSub;
timeout = TIMER_DELAY;
if (log_cb)
log_cb(RETRO_LOG_INFO, "RenderSub: %d.\n", PPU.RenderSub);
}
pressed_r3 = input_cb(0, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_R3);
if(pressed_r3 && timeout == 0)
{
PPU.SFXSpeedupHack = !PPU.SFXSpeedupHack;
timeout = TIMER_DELAY;
if (log_cb)
log_cb(RETRO_LOG_INFO, "SFXSpeedupHack: %d.\n", PPU.SFXSpeedupHack);
}
#endif
break;
case RETRO_DEVICE_JOYPAD_MULTITAP:
for ( j = 0; j < 4; j++)
{
for ( i = RETRO_DEVICE_ID_JOYPAD_B; i <= RETRO_DEVICE_ID_JOYPAD_R; i++)
{
bool pressed;
uint16 button_press;
if (Settings.CurrentROMisMultitapCompatible==TRUE)
pressed = input_cb(port+j, RETRO_DEVICE_JOYPAD, 0, i);
else
pressed = input_cb(port, RETRO_DEVICE_JOYPAD, 0, i);
button_press = snes_lut[i];
if (pressed)
joypad[j*2+port] |= button_press;
else
joypad[j*2+port] &= ~button_press;
}
}
break;
case RETRO_DEVICE_MOUSE:
_x = input_cb(port, RETRO_DEVICE_MOUSE, 0, RETRO_DEVICE_ID_MOUSE_X);
_y = input_cb(port, RETRO_DEVICE_MOUSE, 0, RETRO_DEVICE_ID_MOUSE_Y);
retro_mouse_state[port][0] += _x;
retro_mouse_state[port][1] += _y;
S9xApplyCommand(keymap[BTN_POINTER + port], retro_mouse_state[port][0], retro_mouse_state[port][1]);
for ( i = RETRO_DEVICE_ID_MOUSE_LEFT; i <= RETRO_DEVICE_ID_MOUSE_RIGHT; i++)
S9xApplyCommand(keymap[MAKE_BUTTON(port + 1, i)], input_cb(port, RETRO_DEVICE_MOUSE, 0, i), 0);
break;
case RETRO_DEVICE_LIGHTGUN_SUPER_SCOPE:
retro_scope_state[0] += input_cb(port, RETRO_DEVICE_LIGHTGUN_SUPER_SCOPE, 0, RETRO_DEVICE_ID_LIGHTGUN_X);
retro_scope_state[1] += input_cb(port, RETRO_DEVICE_LIGHTGUN_SUPER_SCOPE, 0, RETRO_DEVICE_ID_LIGHTGUN_Y);
S9xApplyCommand(keymap[BTN_POINTER], retro_scope_state[0], retro_scope_state[1]);
for ( i = RETRO_DEVICE_ID_LIGHTGUN_TRIGGER; i <= RETRO_DEVICE_ID_LIGHTGUN_PAUSE; i++)
S9xApplyCommand(keymap[MAKE_BUTTON(port + 1, i)], input_cb(port, RETRO_DEVICE_LIGHTGUN_SUPER_SCOPE, 0, i), 0);
break;
case RETRO_DEVICE_LIGHTGUN_JUSTIFIER:
case RETRO_DEVICE_LIGHTGUN_JUSTIFIERS:
retro_justifier_state[0][0] += input_cb(port, RETRO_DEVICE_LIGHTGUN_JUSTIFIER, 0, RETRO_DEVICE_ID_LIGHTGUN_X);
retro_justifier_state[0][1] += input_cb(port, RETRO_DEVICE_LIGHTGUN_JUSTIFIER, 0, RETRO_DEVICE_ID_LIGHTGUN_Y);
S9xApplyCommand(keymap[BTN_POINTER], retro_justifier_state[0][0], retro_justifier_state[0][1]);
for ( i = RETRO_DEVICE_ID_LIGHTGUN_TRIGGER; i <= RETRO_DEVICE_ID_LIGHTGUN_START; i++)
S9xApplyCommand(keymap[MAKE_BUTTON(port + 1, i)], input_cb(port, RETRO_DEVICE_LIGHTGUN_JUSTIFIER, 0, i), 0);
break;
default:
if (log_cb)
log_cb(RETRO_LOG_ERROR, "Unknown device.\n");
}
}
#ifdef DEBUG_CONTROLS
if(timeout != 0) timeout--;
#endif
}
static void map_buttons (void)
{
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_A), "Joypad1 A");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_B), "Joypad1 B");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_X), "Joypad1 X");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_Y), "Joypad1 Y");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_SELECT), "Joypad1 Select");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_START), "Joypad1 Start");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_L), "Joypad1 L");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_R), "Joypad1 R");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_LEFT), "Joypad1 Left");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_RIGHT), "Joypad1 Right");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_UP), "Joypad1 Up");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_DOWN), "Joypad1 Down");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_A), "Joypad2 A");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_B), "Joypad2 B");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_X), "Joypad2 X");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_Y), "Joypad2 Y");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_SELECT), "Joypad2 Select");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_START), "Joypad2 Start");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_L), "Joypad2 L");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_R), "Joypad2 R");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_LEFT), "Joypad2 Left");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_RIGHT), "Joypad2 Right");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_UP), "Joypad2 Up");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_DOWN), "Joypad2 Down");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_A), "Joypad3 A");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_B), "Joypad3 B");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_X), "Joypad3 X");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_Y), "Joypad3 Y");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_SELECT), "Joypad3 Select");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_START), "Joypad3 Start");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_L), "Joypad3 L");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_R), "Joypad3 R");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_LEFT), "Joypad3 Left");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_RIGHT), "Joypad3 Right");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_UP), "Joypad3 Up");
LR_MAP_BUTTON(MAKE_BUTTON(3, RETRO_DEVICE_ID_JOYPAD_DOWN), "Joypad3 Down");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_A), "Joypad4 A");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_B), "Joypad4 B");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_X), "Joypad4 X");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_Y), "Joypad4 Y");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_SELECT), "Joypad4 Select");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_START), "Joypad4 Start");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_L), "Joypad4 L");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_R), "Joypad4 R");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_LEFT), "Joypad4 Left");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_RIGHT), "Joypad4 Right");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_UP), "Joypad4 Up");
LR_MAP_BUTTON(MAKE_BUTTON(4, RETRO_DEVICE_ID_JOYPAD_DOWN), "Joypad4 Down");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_A), "Joypad5 A");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_B), "Joypad5 B");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_X), "Joypad5 X");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_Y), "Joypad5 Y");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_SELECT), "Joypad5 Select");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_START), "Joypad5 Start");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_L), "Joypad5 L");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_R), "Joypad5 R");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_LEFT), "Joypad5 Left");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_RIGHT), "Joypad5 Right");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_UP), "Joypad5 Up");
LR_MAP_BUTTON(MAKE_BUTTON(5, RETRO_DEVICE_ID_JOYPAD_DOWN), "Joypad5 Down");
}
void retro_set_controller_port_device(unsigned in_port, unsigned device)
{
int port = in_port;
switch (device)
{
case RETRO_DEVICE_JOYPAD:
retro_devices[port] = RETRO_DEVICE_JOYPAD;
S9xSetController(port, CTL_JOYPAD, port, 0, 0, 0);
break;
case RETRO_DEVICE_JOYPAD_MULTITAP:
retro_devices[port] = RETRO_DEVICE_JOYPAD_MULTITAP;
S9xSetController(port, CTL_MP5, port+0, port+2, port+4, port+6);
break;
case RETRO_DEVICE_MOUSE:
retro_devices[port] = RETRO_DEVICE_MOUSE;
S9xSetController(port, CTL_MOUSE, 0, 0, 0, 0);
/* mapping pointers here */
S9xMapPointer((BTN_POINTER), S9xGetCommandT("Pointer Mouse1+Superscope+Justifier1"));
S9xMapPointer((BTN_POINTER2), S9xGetCommandT("Pointer Mouse2"));
/* mapping extra buttons here */
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_SELECT), "Mouse1 L");
LR_MAP_BUTTON(MAKE_BUTTON(1, RETRO_DEVICE_ID_JOYPAD_START), "Mouse1 R");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_SELECT), "Mouse2 L");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_START), "Mouse2 R");
break;
case RETRO_DEVICE_LIGHTGUN_SUPER_SCOPE:
S9xSetController(port, CTL_SUPERSCOPE, 0, 0, 0, 0);
retro_devices[port] = RETRO_DEVICE_LIGHTGUN_SUPER_SCOPE;
/* mapping pointers here */
S9xMapPointer((BTN_POINTER), S9xGetCommandT("Pointer Mouse1+Superscope+Justifier1"));
S9xMapPointer((BTN_POINTER2), S9xGetCommandT("Pointer Mouse2"));
/* mapping extra buttons here */
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_SELECT), "Superscope Fire");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_START), "Superscope Cursor");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_UP), "Superscope ToggleTurbo");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_DOWN), "Superscope Pause");
break;
case RETRO_DEVICE_LIGHTGUN_JUSTIFIER:
S9xSetController(port, CTL_JUSTIFIER, 0, 0, 0, 0);
retro_devices[port] = RETRO_DEVICE_LIGHTGUN_JUSTIFIER;
/* mapping extra buttons here */
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_SELECT), "Justifier1 Trigger");
LR_MAP_BUTTON(MAKE_BUTTON(2, RETRO_DEVICE_ID_JOYPAD_START), "Justifier1 Start");
break;
case RETRO_DEVICE_LIGHTGUN_JUSTIFIERS:
S9xSetController(port, CTL_JUSTIFIER, 1, 0, 0, 0);
retro_devices[port] = RETRO_DEVICE_LIGHTGUN_JUSTIFIERS;
break;
default:
if (log_cb)
log_cb(RETRO_LOG_ERROR, "Invalid device!\n");
}
if (((retro_devices[0] == RETRO_DEVICE_JOYPAD) && retro_devices[1] == RETRO_DEVICE_JOYPAD) ||
((retro_devices[0] == RETRO_DEVICE_JOYPAD) && retro_devices[1] == RETRO_DEVICE_JOYPAD_MULTITAP) ||
((retro_devices[0] == RETRO_DEVICE_JOYPAD_MULTITAP) && retro_devices[1] == RETRO_DEVICE_JOYPAD))
Settings.NormalControls = 1;
}
static int
dialog_create (pinentry_t pinentry, dialog_t dialog)
{
int err = 0;
int size_y;
int size_x;
int y;
int x;
int ypos;
int xpos;
int description_x = 0;
int error_x = 0;
CH *description = NULL;
CH *error = NULL;
CH *prompt = NULL;
dialog->pinentry = pinentry;
#define COPY_OUT(what) \
do \
if (pinentry->what) \
{ \
what = utf8_to_local (pinentry->lc_ctype, pinentry->what); \
if (!what) \
{ \
err = 1; \
pinentry->specific_err = ASSUAN_Locale_Problem; \
goto out; \
} \
} \
while (0)
COPY_OUT (description);
COPY_OUT (error);
COPY_OUT (prompt);
/* There is no pinentry->default_notok. Map it to
pinentry->notok. */
#define default_notok notok
#define MAKE_BUTTON(which,default) \
do \
{ \
char *new = NULL; \
if (pinentry->default_##which || pinentry->which) \
{ \
int len; \
char *msg; \
int i, j; \
\
msg = pinentry->which; \
if (! msg) \
msg = pinentry->default_##which; \
len = strlen (msg); \
\
new = malloc (len + 3); \
if (!new) \
{ \
err = 1; \
pinentry->specific_err = ASSUAN_Out_Of_Core; \
goto out; \
} \
\
new[0] = '<'; \
for (i = 0, j = 1; i < len; i ++, j ++) \
{ \
if (msg[i] == '_') \
{ \
i ++; \
if (msg[i] == 0) \
/* _ at end of string. */ \
break; \
} \
new[j] = msg[i]; \
} \
\
new[j] = '>'; \
new[j + 1] = 0; \
} \
dialog->which = pinentry_utf8_to_local (pinentry->lc_ctype, \
new ? new : default); \
if (!dialog->which) \
{ \
err = 1; \
pinentry->specific_err = ASSUAN_Locale_Problem; \
goto out; \
} \
} \
while (0)
MAKE_BUTTON (ok, STRING_OK);
if (!pinentry->one_button)
MAKE_BUTTON (cancel, STRING_CANCEL);
else
dialog->cancel = NULL;
if (!pinentry->one_button && pinentry->notok)
MAKE_BUTTON (notok, STRING_NOTOK);
else
dialog->notok = NULL;
getmaxyx (stdscr, size_y, size_x);
/* Check if all required lines fit on the screen. */
y = 1; /* Top frame. */
if (description)
{
CH *start = description;
int len = 0;
do
{
collect_line (size_x - 4, &start, &len);
if (len > description_x)
description_x = len;
y++;
}
while (start[len - 1]);
y++;
}
if (pinentry->pin)
{
if (error)
{
CH *p = error;
int err_x = 0;
while (*p)
{
if (*(p++) == '\n')
{
if (err_x > error_x)
error_x = err_x;
y++;
err_x = 0;
}
else
err_x++;
}
if (err_x > error_x)
error_x = err_x;
y += 2; /* Error message. */
}
y += 2; /* Pin entry field. */
}
y += 2; /* OK/Cancel and bottom frame. */
if (y > size_y)
{
err = 1;
pinentry->specific_err = ASSUAN_Too_Short;
goto out;
}
/* Check if all required columns fit on the screen. */
x = 0;
if (description)
{
int new_x = description_x;
if (new_x > size_x - 4)
new_x = size_x - 4;
if (new_x > x)
x = new_x;
}
if (pinentry->pin)
{
#define MIN_PINENTRY_LENGTH 40
int new_x;
if (error)
{
new_x = error_x;
if (new_x > size_x - 4)
new_x = size_x - 4;
if (new_x > x)
x = new_x;
}
new_x = MIN_PINENTRY_LENGTH;
if (prompt)
{
new_x += STRLEN (prompt) + 1; /* One space after prompt. */
}
if (new_x > size_x - 4)
new_x = size_x - 4;
if (new_x > x)
x = new_x;
}
/* We position the buttons after the first, second and third fourth
of the width. Account for rounding. */
if (x < 3 * strlen (dialog->ok))
x = 3 * strlen (dialog->ok);
if (dialog->cancel)
if (x < 3 * strlen (dialog->cancel))
x = 3 * strlen (dialog->cancel);
if (dialog->notok)
if (x < 3 * strlen (dialog->notok))
x = 3 * strlen (dialog->notok);
/* Add the frame. */
x += 4;
if (x > size_x)
{
err = 1;
pinentry->specific_err = ASSUAN_Too_Short;
goto out;
}
dialog->pos = DIALOG_POS_NONE;
dialog->pin_max = pinentry->pin_len;
dialog->pin_loc = 0;
dialog->pin_len = 0;
ypos = (size_y - y) / 2;
xpos = (size_x - x) / 2;
move (ypos, xpos);
addch (ACS_ULCORNER);
hline (0, x - 2);
move (ypos, xpos + x - 1);
addch (ACS_URCORNER);
move (ypos + 1, xpos + x - 1);
vline (0, y - 2);
move (ypos + y - 1, xpos);
addch (ACS_LLCORNER);
hline (0, x - 2);
move (ypos + y - 1, xpos + x - 1);
addch (ACS_LRCORNER);
ypos++;
if (description)
{
CH *start = description;
int len = 0;
do
{
int i;
move (ypos, xpos);
addch (ACS_VLINE);
addch (' ');
collect_line (size_x - 4, &start, &len);
for (i = 0; i < len - 1; i++)
{
ADDCH (start[i]);
}
if (start[len - 1] != NULLCH && start[len - 1] != NLCH)
ADDCH (start[len - 1]);
ypos++;
}
while (start[len - 1]);
move (ypos, xpos);
addch (ACS_VLINE);
ypos++;
}
if (pinentry->pin)
{
int i;
if (error)
{
CH *p = error;
i = 0;
while (*p)
{
move (ypos, xpos);
addch (ACS_VLINE);
addch (' ');
if (USE_COLORS && pinentry->color_so != PINENTRY_COLOR_NONE)
{
attroff (COLOR_PAIR (1) | (pinentry->color_fg_bright ? A_BOLD : 0));
attron (COLOR_PAIR (2) | (pinentry->color_so_bright ? A_BOLD : 0));
}
else
standout ();
for (;*p && *p != NLCH; p++)
if (i < x - 4)
{
i++;
ADDCH (*p);
}
if (USE_COLORS && pinentry->color_so != PINENTRY_COLOR_NONE)
{
attroff (COLOR_PAIR (2) | (pinentry->color_so_bright ? A_BOLD : 0));
attron (COLOR_PAIR (1) | (pinentry->color_fg_bright ? A_BOLD : 0));
}
else
standend ();
if (*p == '\n')
p++;
i = 0;
ypos++;
}
move (ypos, xpos);
addch (ACS_VLINE);
ypos++;
}
move (ypos, xpos);
addch (ACS_VLINE);
addch (' ');
dialog->pin_y = ypos;
dialog->pin_x = xpos + 2;
dialog->pin_size = x - 4;
if (prompt)
{
CH *p = prompt;
i = STRLEN (prompt);
if (i > x - 4 - MIN_PINENTRY_LENGTH)
i = x - 4 - MIN_PINENTRY_LENGTH;
dialog->pin_x += i + 1;
dialog->pin_size -= i + 1;
while (i-- > 0)
{
ADDCH (*(p++));
}
addch (' ');
}
for (i = 0; i < dialog->pin_size; i++)
addch ('_');
ypos++;
move (ypos, xpos);
addch (ACS_VLINE);
ypos++;
}
move (ypos, xpos);
addch (ACS_VLINE);
if (dialog->cancel || dialog->notok)
{
dialog->ok_y = ypos;
/* Calculating the left edge of the left button, rounding down. */
dialog->ok_x = xpos + 2 + ((x - 4) / 3 - strlen (dialog->ok)) / 2;
move (dialog->ok_y, dialog->ok_x);
addstr (dialog->ok);
if (! pinentry->pin && dialog->notok)
{
dialog->notok_y = ypos;
/* Calculating the left edge of the middle button, rounding up. */
dialog->notok_x = xpos + x / 2 - strlen (dialog->notok) / 2;
move (dialog->notok_y, dialog->notok_x);
addstr (dialog->notok);
}
if (dialog->cancel)
{
dialog->cancel_y = ypos;
/* Calculating the left edge of the right button, rounding up. */
dialog->cancel_x = xpos + x - 2 - ((x - 4) / 3 + strlen (dialog->cancel)) / 2;
move (dialog->cancel_y, dialog->cancel_x);
addstr (dialog->cancel);
}
}
else
{
dialog->ok_y = ypos;
/* Calculating the left edge of the OK button, rounding down. */
dialog->ok_x = xpos + x / 2 - strlen (dialog->ok) / 2;
move (dialog->ok_y, dialog->ok_x);
addstr (dialog->ok);
}
out:
if (description)
free (description);
if (error)
free (error);
if (prompt)
free (prompt);
return err;
}
static void report_buttons()
{
int i, j, _x, _y, port;
for ( port = SNES_PORT_1; port <= SNES_PORT_2; port++)
{
switch (snes_devices[port])
{
case SNES_DEVICE_JOYPAD:
for ( i = BTN_FIRST; i <= BTN_LAST; i++)
{
s9xcommand_t cmd = keymap[MAKE_BUTTON(port + 1, i)];
uint16 r = cmd.commandunion.button.joypad;
bool pressed = s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_JOYPAD, 0, i);
if (pressed)
joypad[port] |= r;
else
joypad[port] &= ~r;
}
break;
case SNES_DEVICE_MULTITAP:
for ( j = 0; j < 4; j++)
{
for ( i = BTN_FIRST; i <= BTN_LAST; i++)
{
s9xcommand_t cmd = keymap[MAKE_BUTTON(j + 2, i)];
uint16 r = cmd.commandunion.button.joypad;
bool pressed = s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_MULTITAP, j, i);
if (pressed)
joypad[j] |= r;
else
joypad[j] &= ~r;
}
}
break;
case SNES_DEVICE_MOUSE:
_x = s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_MOUSE, 0, SNES_DEVICE_ID_MOUSE_X);
_y = s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_MOUSE, 0, SNES_DEVICE_ID_MOUSE_Y);
snes_mouse_state[port][0] += _x;
snes_mouse_state[port][1] += _y;
S9xReportPointer(BTN_POINTER + port, snes_mouse_state[port][0], snes_mouse_state[port][1]);
for ( i = MOUSE_LEFT; i <= MOUSE_LAST; i++)
S9xReportButton(MAKE_BUTTON(port + 1, i), s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_MOUSE, 0, i));
break;
case SNES_DEVICE_SUPER_SCOPE:
snes_scope_state[0] += s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_SUPER_SCOPE, 0, SNES_DEVICE_ID_SUPER_SCOPE_X);
snes_scope_state[1] += s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_SUPER_SCOPE, 0, SNES_DEVICE_ID_SUPER_SCOPE_Y);
S9xReportPointer(BTN_POINTER, snes_scope_state[0], snes_scope_state[1]);
for ( i = SCOPE_TRIGGER; i <= SCOPE_LAST; i++)
S9xReportButton(MAKE_BUTTON(port + 1, i), s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_SUPER_SCOPE, 0, i));
break;
case SNES_DEVICE_JUSTIFIER:
case SNES_DEVICE_JUSTIFIERS:
snes_justifier_state[0][0] += s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_JUSTIFIER, 0, SNES_DEVICE_ID_JUSTIFIER_X);
snes_justifier_state[0][1] += s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_JUSTIFIER, 0, SNES_DEVICE_ID_JUSTIFIER_Y);
S9xReportPointer(BTN_POINTER, snes_justifier_state[0][0], snes_justifier_state[0][1]);
for ( i = JUSTIFIER_TRIGGER; i <= JUSTIFIER_LAST; i++)
S9xReportButton(MAKE_BUTTON(port + 1, i), s9x_input_state_cb(port == SNES_PORT_2, SNES_DEVICE_JUSTIFIER, 0, i));
break;
default:
fprintf(stderr, "[libsnes]: Unknown device...\n");
}
}
}
static void map_buttons()
{
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_A), "Joypad1 A");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_B), "Joypad1 B");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_X), "Joypad1 X");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_Y), "Joypad1 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_SELECT), "Joypad1 Select");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_START), "Joypad1 Start");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_L), "Joypad1 L");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_R), "Joypad1 R");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_LEFT), "Joypad1 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_RIGHT), "Joypad1 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_UP), "Joypad1 Up");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_DOWN), "Joypad1 Down");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_A), "Joypad2 A");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_B), "Joypad2 B");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_X), "Joypad2 X");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_Y), "Joypad2 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_SELECT), "Joypad2 Select");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_START), "Joypad2 Start");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_L), "Joypad2 L");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_R), "Joypad2 R");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_LEFT), "Joypad2 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_RIGHT), "Joypad2 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_UP), "Joypad2 Up");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_DOWN), "Joypad2 Down");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_A), "Joypad3 A");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_B), "Joypad3 B");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_X), "Joypad3 X");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_Y), "Joypad3 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_SELECT), "Joypad3 Select");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_START), "Joypad3 Start");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_L), "Joypad3 L");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_R), "Joypad3 R");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_LEFT), "Joypad3 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_RIGHT), "Joypad3 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_UP), "Joypad3 Up");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_DOWN), "Joypad3 Down");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_A), "Joypad4 A");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_B), "Joypad4 B");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_X), "Joypad4 X");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_Y), "Joypad4 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_SELECT), "Joypad4 Select");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_START), "Joypad4 Start");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_L), "Joypad4 L");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_R), "Joypad4 R");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_LEFT), "Joypad4 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_RIGHT), "Joypad4 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_UP), "Joypad4 Up");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_DOWN), "Joypad4 Down");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_A), "Joypad5 A");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_B), "Joypad5 B");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_X), "Joypad5 X");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_Y), "Joypad5 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_SELECT), "Joypad5 Select");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_START), "Joypad5 Start");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_L), "Joypad5 L");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_R), "Joypad5 R");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_LEFT), "Joypad5 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_RIGHT), "Joypad5 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_UP), "Joypad5 Up");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_DOWN), "Joypad5 Down");
}
BOOL CALLBACK EnumCallback(const DIDEVICEINSTANCE* instance,
void* context) {
Context* ctxt = reinterpret_cast<Context*>(context);
if (FAILED(ctxt->d_interface->CreateDevice(instance->guidInstance,
&ctxt->device,
NULL)))
return DIENUM_CONTINUE;
ctxt->device->Acquire();
#define MAKE_AXIS(i) \
{0, FIELD_OFFSET(JoyData, axes) + 4 * i, \
DIDFT_AXIS | DIDFT_MAKEINSTANCE(i) | DIDFT_OPTIONAL, 0}
#define MAKE_BUTTON(i) \
{&GUID_Button, FIELD_OFFSET(JoyData, buttons) + i, \
DIDFT_BUTTON | DIDFT_MAKEINSTANCE(i) | DIDFT_OPTIONAL, 0}
#define MAKE_POV() \
{&GUID_POV, FIELD_OFFSET(JoyData, pov), DIDFT_POV | DIDFT_OPTIONAL, 0}
DIOBJECTDATAFORMAT rgodf[] = {
MAKE_AXIS(0),
MAKE_AXIS(1),
MAKE_AXIS(2),
MAKE_AXIS(3),
MAKE_AXIS(4),
MAKE_AXIS(5),
MAKE_AXIS(6),
MAKE_AXIS(7),
MAKE_AXIS(8),
MAKE_AXIS(9),
MAKE_BUTTON(0),
MAKE_BUTTON(1),
MAKE_BUTTON(2),
MAKE_BUTTON(3),
MAKE_BUTTON(4),
MAKE_BUTTON(5),
MAKE_BUTTON(6),
MAKE_BUTTON(7),
MAKE_BUTTON(8),
MAKE_BUTTON(9),
MAKE_BUTTON(10),
MAKE_BUTTON(11),
MAKE_BUTTON(12),
MAKE_BUTTON(13),
MAKE_BUTTON(14),
MAKE_BUTTON(15),
MAKE_BUTTON(16),
MAKE_POV(),
};
#undef MAKE_AXIS
#undef MAKE_BUTTON
#undef MAKE_POV
DIDATAFORMAT df = {
sizeof (DIDATAFORMAT),
sizeof (DIOBJECTDATAFORMAT),
DIDF_ABSAXIS,
sizeof (JoyData),
sizeof (rgodf) / sizeof (rgodf[0]),
rgodf
};
// If we can't set the data format on the device, don't add it to our
// list, since we won't know how to read data from it.
if (FAILED(ctxt->device->SetDataFormat(&df))) {
ctxt->device->Release();
return DIENUM_CONTINUE;
}
printf("Product name: %ls\n", instance->tszProductName);
if (!GetVendorProduct(ctxt))
return DIENUM_CONTINUE;
// Dead zone at 10%.
SetDirectInputDeadZone(ctxt->device, 1000);
// A hack to disallow "zero" values from our axis.
// This allows us to tell the difference between an axis that isn't
// present, and one that is at its minimum value.
DIPROPRANGE range;
range.diph.dwSize = sizeof(DIPROPRANGE);
range.diph.dwHeaderSize = sizeof(DIPROPHEADER);
range.diph.dwHow = DIPH_DEVICE;
range.diph.dwObj = 0;
range.lMin = 1;
range.lMax = 65535;
if (SUCCEEDED(ctxt->device->SetProperty(DIPROP_RANGE, &range.diph)))
ctxt->valid = true;
return DIENUM_STOP;
}
static int
dialog_create (pinentry_t pinentry, dialog_t dialog)
{
int err = 0;
int size_y;
int size_x;
int y;
int x;
int ypos;
int xpos;
int description_x = 0;
int error_x = 0;
char *description = NULL;
char *error = NULL;
char *prompt = NULL;
#define COPY_OUT(what) \
do \
if (pinentry->what) \
{ \
what = pinentry_utf8_to_local (pinentry->lc_ctype, \
pinentry->what); \
if (!what) \
{ \
err = 1; \
goto out; \
} \
} \
while (0)
COPY_OUT (description);
COPY_OUT (error);
COPY_OUT (prompt);
#define MAKE_BUTTON(which,default) \
do \
{ \
char *new = NULL; \
if (pinentry->which) \
{ \
int len = strlen (pinentry->which); \
new = malloc (len + 3); \
if (!new) \
{ \
err = 1; \
goto out; \
} \
new[0] = '<'; \
memcpy (&new[1], pinentry->which, len); \
new[len + 1] = '>'; \
new[len + 2] = '\0'; \
} \
dialog->which = pinentry_utf8_to_local (pinentry->lc_ctype, \
new ? new : default); \
if (!dialog->which) \
{ \
err = 1; \
goto out; \
} \
} \
while (0)
MAKE_BUTTON (ok, STRING_OK);
if (!pinentry->one_button)
MAKE_BUTTON (cancel, STRING_CANCEL);
else
dialog->cancel = NULL;
getmaxyx (stdscr, size_y, size_x);
/* Check if all required lines fit on the screen. */
y = 1; /* Top frame. */
if (description)
{
char *start = description;
int len = 0;
do
{
collect_line (size_x - 4, &start, &len);
if (len > description_x)
description_x = len;
y++;
}
while (start[len - 1]);
y++;
}
if (pinentry->pin)
{
if (error)
{
char *p = error;
int err_x = 0;
while (*p)
{
if (*(p++) == '\n')
{
if (err_x > error_x)
error_x = err_x;
y++;
err_x = 0;
}
else
err_x++;
}
if (err_x > error_x)
error_x = err_x;
y += 2; /* Error message. */
}
y += 2; /* Pin entry field. */
}
y += 2; /* OK/Cancel and bottom frame. */
if (y > size_y)
{
err = 1;
goto out;
}
/* Check if all required columns fit on the screen. */
x = 0;
if (description)
{
int new_x = description_x;
if (new_x > size_x - 4)
new_x = size_x - 4;
if (new_x > x)
x = new_x;
}
if (pinentry->pin)
{
#define MIN_PINENTRY_LENGTH 40
int new_x;
if (error)
{
new_x = error_x;
if (new_x > size_x - 4)
new_x = size_x - 4;
if (new_x > x)
x = new_x;
}
new_x = MIN_PINENTRY_LENGTH;
if (prompt)
new_x += strlen (prompt) + 1; /* One space after prompt. */
if (new_x > size_x - 4)
new_x = size_x - 4;
if (new_x > x)
x = new_x;
}
/* We position the buttons after the first and second third of the
width. Account for rounding. */
if (x < 2 * strlen (dialog->ok))
x = 2 * strlen (dialog->ok);
if (dialog->cancel)
if (x < 2 * strlen (dialog->cancel))
x = 2 * strlen (dialog->cancel);
/* Add the frame. */
x += 4;
if (x > size_x)
{
err = 1;
goto out;
}
dialog->pos = DIALOG_POS_NONE;
dialog->pin = pinentry->pin;
dialog->pin_max = pinentry->pin_len;
dialog->pin_loc = 0;
dialog->pin_len = 0;
ypos = (size_y - y) / 2;
xpos = (size_x - x) / 2;
move (ypos, xpos);
addch (ACS_ULCORNER);
hline (0, x - 2);
move (ypos, xpos + x - 1);
addch (ACS_URCORNER);
move (ypos + 1, xpos + x - 1);
vline (0, y - 2);
move (ypos + y - 1, xpos);
addch (ACS_LLCORNER);
hline (0, x - 2);
move (ypos + y - 1, xpos + x - 1);
addch (ACS_LRCORNER);
ypos++;
if (description)
{
char *start = description;
int len = 0;
do
{
int i;
move (ypos, xpos);
addch (ACS_VLINE);
addch (' ');
collect_line (size_x - 4, &start, &len);
for (i = 0; i < len - 1; i++)
addch ((unsigned char) start[i]);
if (start[len - 1] && start[len - 1] != '\n')
addch ((unsigned char) start[len - 1]);
ypos++;
}
while (start[len - 1]);
move (ypos, xpos);
addch (ACS_VLINE);
ypos++;
}
if (pinentry->pin)
{
int i;
if (error)
{
char *p = error;
i = 0;
while (*p)
{
move (ypos, xpos);
addch (ACS_VLINE);
addch (' ');
if (USE_COLORS && pinentry->color_so != PINENTRY_COLOR_NONE)
{
attroff (COLOR_PAIR (1) | (pinentry->color_fg_bright ? A_BOLD : 0));
attron (COLOR_PAIR (2) | (pinentry->color_so_bright ? A_BOLD : 0));
}
else
standout ();
for (;*p && *p != '\n'; p++)
if (i < x - 4)
{
i++;
addch ((unsigned char) *p);
}
if (USE_COLORS && pinentry->color_so != PINENTRY_COLOR_NONE)
{
attroff (COLOR_PAIR (2) | (pinentry->color_so_bright ? A_BOLD : 0));
attron (COLOR_PAIR (1) | (pinentry->color_fg_bright ? A_BOLD : 0));
}
else
standend ();
if (*p == '\n')
p++;
i = 0;
ypos++;
}
move (ypos, xpos);
addch (ACS_VLINE);
ypos++;
}
move (ypos, xpos);
addch (ACS_VLINE);
addch (' ');
dialog->pin_y = ypos;
dialog->pin_x = xpos + 2;
dialog->pin_size = x - 4;
if (prompt)
{
char *p = prompt;
i = strlen (prompt);
if (i > x - 4 - MIN_PINENTRY_LENGTH)
i = x - 4 - MIN_PINENTRY_LENGTH;
dialog->pin_x += i + 1;
dialog->pin_size -= i + 1;
while (i-- > 0)
addch ((unsigned char) *(p++));
addch (' ');
}
for (i = 0; i < dialog->pin_size; i++)
addch ('_');
ypos++;
move (ypos, xpos);
addch (ACS_VLINE);
ypos++;
}
move (ypos, xpos);
addch (ACS_VLINE);
if (dialog->cancel)
{
dialog->ok_y = ypos;
/* Calculating the left edge of the left button, rounding down. */
dialog->ok_x = xpos + 2 + ((x - 4) / 2 - strlen (dialog->ok)) / 2;
move (dialog->ok_y, dialog->ok_x);
addstr (dialog->ok);
dialog->cancel_y = ypos;
/* Calculating the left edge of the right button, rounding up. */
dialog->cancel_x = xpos + x - 2 - ((x - 4) / 2 + strlen (dialog->cancel)) / 2;
move (dialog->cancel_y, dialog->cancel_x);
addstr (dialog->cancel);
}
else
{
dialog->ok_y = ypos;
/* Calculating the left edge of the OK button, rounding down. */
dialog->ok_x = xpos + x / 2 - strlen (dialog->ok) / 2;
move (dialog->ok_y, dialog->ok_x);
addstr (dialog->ok);
}
out:
if (description)
free (description);
if (error)
free (error);
if (prompt)
free (prompt);
return err;
}
static void map_buttons()
{
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_A), "Joypad1 A");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_B), "Joypad1 B");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_X), "Joypad1 X");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_Y), "Joypad1 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_SELECT), "{Joypad1 Select,Mouse1 L}");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_START), "{Joypad1 Start,Mouse1 R}");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_L), "Joypad1 L");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_R), "Joypad1 R");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_LEFT), "Joypad1 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_RIGHT), "Joypad1 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_UP), "Joypad1 Up");
MAP_BUTTON(MAKE_BUTTON(PAD_1, BTN_DOWN), "Joypad1 Down");
S9xMapPointer((BTN_POINTER), S9xGetCommandT("Pointer Mouse1+Superscope+Justifier1"), false);
S9xMapPointer((BTN_POINTER2), S9xGetCommandT("Pointer Mouse2"), false);
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_A), "Joypad2 A");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_B), "Joypad2 B");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_X), "Joypad2 X");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_Y), "Joypad2 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_SELECT), "{Joypad2 Select,Mouse2 L,Superscope Fire,Justifier1 Trigger}");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_START), "{Joypad2 Start,Mouse2 R,Superscope Cursor,Justifier1 Start}");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_L), "Joypad2 L");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_R), "Joypad2 R");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_LEFT), "Joypad2 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_RIGHT), "Joypad2 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_UP), "{Joypad2 Up,Superscope ToggleTurbo}");
MAP_BUTTON(MAKE_BUTTON(PAD_2, BTN_DOWN), "{Joypad2 Down,Superscope Pause}");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_A), "Joypad3 A");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_B), "Joypad3 B");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_X), "Joypad3 X");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_Y), "Joypad3 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_SELECT), "Joypad3 Select");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_START), "Joypad3 Start");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_L), "Joypad3 L");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_R), "Joypad3 R");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_LEFT), "Joypad3 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_RIGHT), "Joypad3 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_UP), "Joypad3 Up");
MAP_BUTTON(MAKE_BUTTON(PAD_3, BTN_DOWN), "Joypad3 Down");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_A), "Joypad4 A");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_B), "Joypad4 B");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_X), "Joypad4 X");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_Y), "Joypad4 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_SELECT), "Joypad4 Select");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_START), "Joypad4 Start");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_L), "Joypad4 L");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_R), "Joypad4 R");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_LEFT), "Joypad4 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_RIGHT), "Joypad4 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_UP), "Joypad4 Up");
MAP_BUTTON(MAKE_BUTTON(PAD_4, BTN_DOWN), "Joypad4 Down");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_A), "Joypad5 A");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_B), "Joypad5 B");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_X), "Joypad5 X");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_Y), "Joypad5 Y");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_SELECT), "Joypad5 Select");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_START), "Joypad5 Start");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_L), "Joypad5 L");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_R), "Joypad5 R");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_LEFT), "Joypad5 Left");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_RIGHT), "Joypad5 Right");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_UP), "Joypad5 Up");
MAP_BUTTON(MAKE_BUTTON(PAD_5, BTN_DOWN), "Joypad5 Down");
}
