S8 I2C1_WRITE_String(U8 DevAdd, U8 RegAdd, U8 *RegValue, U8 len)
{
char ComRes;
DevAdd = (DevAdd<<1)|M_I2C_Write;
StartI2C1(); // Send the start bit
IdleI2C1(); // Wait to complete
while(I2C1STATbits.ACKSTAT); //wait for acknowledgement
ComRes=MasterWriteI2C1(DevAdd); // Adress with write mode
IdleI2C1(); // Wait to complete
while(I2C1STATbits.ACKSTAT); //wait for acknowledgement
ComRes=MasterWriteI2C1(RegAdd); // Write the chip ID register loaction for read
IdleI2C1(); // Send the start bit
while(I2C1STATbits.ACKSTAT); //wait for acknowledgement
while(len--)
{
ComRes=MasterWriteI2C1(*RegValue); // Write the chip ID register loaction for read
IdleI2C1(); // Wait to complete
while(I2C1STATbits.ACKSTAT); //wait for acknowledgement
RegValue++;
}
StopI2C1(); // Stop the I2C communication
IdleI2C1(); // Wait to complete
return ComRes;
}
S8 I2C1_READ_String(U8 DevAdd, U8 RegAdd, U8 *RegValue, U8 len)
{
int DataWait = len*100;
char ComRes,DevAddr;
DevAddr = (DevAdd<<1)|M_I2C_Write;
StartI2C1(); // Send the start bit
IdleI2C1(); // Wait to complete
while(I2C1STATbits.ACKSTAT); //wait for acknowledgement
ComRes=MasterWriteI2C1(DevAddr); // Adress with write mode
IdleI2C1(); // Wait to complete
while(I2C1STATbits.ACKSTAT); //wait for acknowledgement
ComRes=MasterWriteI2C1(RegAdd); // Write the chip ID register loaction for read
IdleI2C1(); // Send the start bit
while(I2C1STATbits.ACKSTAT); //wait for acknowledgement
RestartI2C1(); // Send the start bit
IdleI2C1(); // Wait to complete
while(I2C1STATbits.ACKSTAT); //wait for acknowledgement
DevAddr = (DevAdd<<1)|M_I2C_Read;
MasterWriteI2C1(DevAddr); // Adress with write mode
IdleI2C1(); // Wait to complete
while(I2C1STATbits.ACKSTAT); //wait for acknowledgement
MastergetsI2C1(len, RegValue, DataWait); // Read the Register value
IdleI2C1(); // Wait to complete
NotAckI2C1(); // Not Acknowledge I2C
IdleI2C1(); // Wait to complete
StopI2C1(); // Stop I2C communication
IdleI2C1(); // Wait to complete;
return ComRes;
}
uint8_t I2C_WriteToReg(uint8_t I2CAddress, uint8_t deviceRegister, uint8_t data) {
StartI2C1();
while(I2CCONbits.SEN);
IFS1bits.MI2C1IF = 0;
MasterWriteI2C1(I2CAddress << 1);
while(I2CSTATbits.TBF); // 8 clock cycles
while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
MasterWriteI2C1(deviceRegister);
while(I2CSTATbits.TBF); // 8 clock cycles
while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
MasterWriteI2C1(data);
while(I2CSTATbits.TBF); // 8 clock cycles
while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
StopI2C1(); // Write stop sequence.
while(I2CCONbits.PEN);
IdleI2C1();
return(1);
}
uint8_t I2C_ReadFromReg(uint8_t I2CAddress, uint8_t deviceRegister) {
uint8_t data = 0;
StartI2C1();
while(I2CCONbits.SEN);
MasterWriteI2C1(I2CAddress << 1);
while(I2CSTATbits.TBF); // 8 clock cycles
while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
MasterWriteI2C1(deviceRegister);
while(I2CSTATbits.TBF); // 8 clock cycles
while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
RestartI2C1(); // Second start.
while(I2CCONbits.RSEN);
MasterWriteI2C1((I2CAddress << 1 )+ 1);
while(I2CSTATbits.TBF); // 8 clock cycles
while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
data = MasterReadI2C1();
NotAckI2C1(); // Read stop sequence.
while(I2C1CONbits.ACKEN == 1);
StopI2C1();
while(I2CCONbits.PEN);
IdleI2C1();
return(data);
}
void I2C_WriteToReg(uint8_t address, uint8_t deviceRegister, uint8_t data)
{
// Assert the start condition
StartI2C1();
while (I2C1CONbits.SEN);
IFS1bits.MI2C1IF = 0;
// Send the 7-bit I2C device address
MasterWriteI2C1(address << 1);
while (I2C1STATbits.TBF); // 8 clock cycles
while (!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
// Send the register address
MasterWriteI2C1(deviceRegister);
while (I2C1STATbits.TBF); // 8 clock cycles
while (!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
// Send the data
MasterWriteI2C1(data);
while (I2C1STATbits.TBF); // 8 clock cycles
while (!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
// Assert the stop condition
StopI2C1();
while (I2C1CONbits.PEN);
// Sit idle on the bus
IdleI2C1();
}
/**
* @brief Write to device using generic i2c protocol
* @param[in] slave_addr - slave address
* @param[in] reg_addr - register address
* @param[in] length - number of bytes to read
* @param[in] *data - pointer to where register data is to be transfered
* @return 0 if sucessfull, 1 otherwise
*/
int i2c_read(unsigned char slave_addr, unsigned char reg_addr, unsigned char length, unsigned char *data) {
BYTE i=2;
StartI2C1(); //Send the Start Bit
IdleI2C1();
if (MasterWriteI2C1(((slave_addr<<1)|(0x00))))
return 1;
IdleI2C1();
if (MasterWriteI2C1(reg_addr))
return 1;
IdleI2C1();
StartI2C1(); //Send the Start Bit
IdleI2C1(); //Wait to complete
if (MasterWriteI2C1(((slave_addr<<1)|(0x01))))
return 1;
IdleI2C1();
I2CReceiverEnable ( I2C1, TRUE);
for(i=0;i<length;i++) {
data[i] = MasterReadI2C1();
if(i<(length-1)) {
I2CAcknowledgeByte(MPU_I2C, TRUE);
IdleI2C1();
}
else {
I2CAcknowledgeByte(MPU_I2C, FALSE);
IdleI2C1();
}
}
StopI2C1(); //Send the Stop condition
IdleI2C1(); //Wait to complete
return 0;
}
void LDByteWriteI2C(unsigned char SlaveAddress, unsigned char reg, unsigned char data){
StartI2C1(); //Send the Start Bit
IdleI2C1(); //Wait to complete
MasterWriteI2C1(SlaveAddress); //transmit write command
IdleI2C1(); //Wait to complete
MasterWriteI2C1(reg);
IdleI2C1();
MasterWriteI2C1(data);
IdleI2C1();
StopI2C1();
IdleI2C1();
}
void I2C_ReadFromReg_Burst(uint8_t address, uint8_t deviceRegister, uint8_t* data, uint8_t burstNum)
{
// Assert the start condition
StartI2C1();
while (I2C1CONbits.SEN);
// Send the 7-bit device address
MasterWriteI2C1(address << 1);
while (I2C1STATbits.TBF); // 8 clock cycles
while (!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
// Send the register address
MasterWriteI2C1(deviceRegister);
while (I2C1STATbits.TBF); // 8 clock cycles
while (!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
// Start a new I2C transaction
RestartI2C1();
while (I2C1CONbits.RSEN);
// Send the second address
MasterWriteI2C1((address << 1) + 1);
while (I2C1STATbits.TBF); // 8 clock cycles
while (!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
IFS1bits.MI2C1IF = 0; // Clear interrupt flag
// Read the data
data[0] = MasterReadI2C1();
if (burstNum > 1) {
uint8_t i;
for (i = 1; i < burstNum; i++) {
AckI2C1();
while (I2C1CONbits.ACKEN == 1);
data[i] = MasterReadI2C1();
}
}
// No need to ack reception of this data
NotAckI2C1();
while (I2C1CONbits.ACKEN == 1);
// Stop the I2C transaction
StopI2C1();
while (I2C1CONbits.PEN);
// Go idle on the bus
IdleI2C1();
}
void ClearAll(void)
{
StartI2C1();
IdleI2C1();
MasterWriteI2C1(Slave);
IdleI2C1();
MasterWriteI2C1(Comsend);
IdleI2C1();
MasterWriteI2C1(Clear);
IdleI2C1();
StopI2C1();
IdleI2C1();
}
void FirstLine(void)
{
StartI2C1();
IdleI2C1();
MasterWriteI2C1(Slave);
IdleI2C1();
MasterWriteI2C1(Comsend);
IdleI2C1();
MasterWriteI2C1(0x80);
IdleI2C1();
StopI2C1();
IdleI2C1();
}
void SecondLine(void)
{
StartI2C1();
IdleI2C1();
MasterWriteI2C1(Slave);
IdleI2C1();
MasterWriteI2C1(Comsend);
IdleI2C1();
MasterWriteI2C1(Line2);
IdleI2C1();
StopI2C1();
IdleI2C1();
}
/***************************************************
* SendData(int data, unsigned int address) *
* *
* Sends a byte of data (DATA) over the I2C line *
* to I2C address ADDRESS *
* *
* Returns: nothing *
***************************************************/
void SendData (int data, unsigned int address){
StartI2C1(); //Send the Start Bit
IdleI2C1(); //Wait to complete
MasterWriteI2C1((address << 1)); //Sends the slave address over the I2C line. This must happen first so the
//proper slave is selected to receive data.
IdleI2C1(); //Wait to complete
MasterWriteI2C1(data); //Sends data byte over I2C line
IdleI2C1(); //Wait to complete
StopI2C1(); //Send the Stop condition
IdleI2C1(); //Wait to complete
} //end function
void Write23X08_17(unsigned char reg, unsigned char data, unsigned char gAddrPins)
{
StartI2C1();
// Wait till start sequence is completed
while (I2C1CONbits.SEN);
MasterWriteI2C1(gControlByte | WrtCmd | gAddrPins);
WaitForACK();
MasterWriteI2C1(reg);
WaitForACK();
MasterWriteI2C1(data);
WaitForACK();
StopI2C1();
// Wait till stop sequence is completed
while (I2C1CONbits.PEN);
}
void LDByteReadI2C(unsigned char SlaveAddress, unsigned char reg, unsigned char *data, int num){
StartI2C1(); //Send the Start Bit
IdleI2C1(); //Wait to complete
MasterWriteI2C1(SlaveAddress); //transmit write command
IdleI2C1(); //Wait to complete
MasterWriteI2C1(reg);
IdleI2C1();
StopI2C1();
IdleI2C1();
StartI2C1(); //Send the Start Bit
IdleI2C1(); //Wait to complete
MasterWriteI2C1(SlaveAddress|0x01); //transmit read command
IdleI2C1(); //Wait to complete
MastergetsI2C1(num, data, 30);
StopI2C1(); //Send the Stop condition
IdleI2C1(); //Wait to complete
}
/*
* Function reads I2C device from slaveAdd
* inputs: slaveAdd
* registerAdd
* returns: int recByte -> received byte from slave device
* -1 -> reading error
*/
unsigned char I2C1ReadByte1(UINT8 slaveAdd, UINT8 registerAdd)
{
unsigned char recByte = 0;
UINT8 address;
StartI2C1();
IdleI2C1(); //Wait to complete
address = (slaveAdd<<1) & 0xFE; //write
MasterWriteI2C1(address);
IdleI2C1();
if(I2C1STATbits.ACKSTAT)
{
StopI2C1();
IdleI2C1();
return 0;
}
//Send register register location
MasterWriteI2C1(registerAdd);
IdleI2C1();
if(I2C1STATbits.ACKSTAT)
{
StopI2C1();
IdleI2C1();
return 0;
}
RestartI2C1(); //Send start condition again
IdleI2C1();
address = (slaveAdd<<1) | 0x01; //Read
MasterWriteI2C1(address);
IdleI2C1();
if(I2C1STATbits.ACKSTAT)
{
StopI2C1();
IdleI2C1();
return 0;
}
recByte = MasterReadI2C1();
//NotAckI2C1();
IdleI2C1();
StopI2C1();
IdleI2C1();
return recByte;
}
unsigned int portableMasterWriteI2C(I2cBusConnection* i2cBusConnection, unsigned char data) {
I2cBus* i2cBus = i2cBusConnection->i2cBus;
if (i2cBus == NULL) {
return MasterWriteI2C1(data);
}
else {
I2C_MODULE i2cModule = getI2C_MODULE(i2cBus->port);
return I2CSendByte(i2cModule, data);
}
}
int RcvData(unsigned int address) {
StartI2C1(); //Send line start condition
IdleI2C1(); //Wait to complete
MasterWriteI2C1((address << 1) | 1); //Write out slave address OR 1 (read command)
IdleI2C1(); //Wait to complete
int rcv = MasterReadI2C1(); //Read in a value
StopI2C1(); //Send line stop condition
IdleI2C1(); //Wait co complete
return rcv; //Return read value
}
void i2cSendByte(unsigned char channel, unsigned char byte) {
if (channel == 1) {
MasterWriteI2C1(byte);
while(I2C1STATbits.TRSTAT);
while(I2C1STATbits.ACKSTAT);
} else {
MasterWriteI2C2(byte);
while(I2C2STATbits.TRSTAT);
while(I2C2STATbits.ACKSTAT);
}
}
unsigned char Read23X08_17(unsigned char reg, unsigned char gAddrPins)
{
unsigned char num;
StartI2C1();
// Wait till start sequence is completed
while (I2C1CONbits.SEN);
MasterWriteI2C1(gControlByte | WrtCmd | gAddrPins);
WaitForACK();
MasterWriteI2C1(reg);
WaitForACK();
RestartI2C1();
IdleI2C1();
MasterWriteI2C1(gControlByte | RdCmd | gAddrPins);
WaitForACK();
num = MasterReadI2C1();
NotAckI2C1();
StopI2C1();
IdleI2C1();
return (num);
}
void Show(unsigned char *text)
{
// Assert a start condition
StartI2C1();
while(_SEN);
// Write the address of the slave
MasterWriteI2C1(Slave);
while(I2C1STATbits.TBF); //Wait till address is transmitted
while(!IFS1bits.MI2C1IF); //Wait for ninth clock cycle
IdleI2C1();
MasterWriteI2C1(Datasend);
IdleI2C1();
while(*text)
{
MasterWriteI2C1(*text);
IdleI2C1();
++text;
}
StopI2C1();
delay(2);
}
/**
* @brief Write to device using generic i2c protocol
* @param[in] slave_addr - slave address
* @param[in] reg_addr - register address
* @param[in] length - number of bytes to write
* @param[in] *data - pointer for data to write
* @return 0 if sucessfull, 1 otherwise
*/
int i2c_write(unsigned char slave_addr, unsigned char reg_addr, unsigned char length, unsigned char const *data) {
BYTE i;
StartI2C1(); //Send the Start Bit
IdleI2C1(); //Wait to complete
if (MasterWriteI2C1(((slave_addr<<1)|(0x00))))
return 1;
IdleI2C1();
if (MasterWriteI2C1(reg_addr))
return 1;
IdleI2C1();
for(i=0;i<length;i++){
if (MasterWriteI2C1(data[i]))
return 1;
}
StopI2C1(); //Send the Stop condition
IdleI2C1(); //Wait to complete
return 0;
}
void InitDisplay()
{
unsigned int config1 = I2C_ON | I2C_7BIT_ADD;
//unsigned int config2 = 15; // Works with no pll in use
unsigned int config2 = 24;
delay(100); // THIS IS REQUIRED TO ALLOW THE VOLTAGE TO STABILIZE BEFORE INIT-ING THE DISPLAY
ConfigIntI2C1(MI2C_INT_OFF); //Disable I2C interrupt
CloseI2C1();
OpenI2C1( config1, config2);
IdleI2C1();
// Assert a start condition
StartI2C1();
while(_SEN);
// Write the address of the slave
MasterWriteI2C1(Slave);
while(I2C1STATbits.TBF); //Wait till address is transmitted
while(!IFS1bits.MI2C1IF); //Wait for ninth clock cycle
MasterWriteI2C1(Comsend);
IdleI2C1();
MasterWriteI2C1(0x38);
IdleI2C1();
delay(10);
MasterWriteI2C1(0x39);
IdleI2C1();
delay(10);
MasterWriteI2C1(0x14);
IdleI2C1();
MasterWriteI2C1(0x25);
IdleI2C1();
MasterWriteI2C1(0x5E);
IdleI2C1();
MasterWriteI2C1(0x6D);
IdleI2C1();
MasterWriteI2C1(0x0C);
IdleI2C1();
MasterWriteI2C1(0x01);
IdleI2C1();
MasterWriteI2C1(0x06);
IdleI2C1();
delay(10);
StopI2C1();
IdleI2C1();
CGRAM(); //define CGRAM
StartI2C1();
MasterWriteI2C1(Slave);
IdleI2C1();
MasterWriteI2C1(Comsend);
IdleI2C1();
MasterWriteI2C1(0x39);
IdleI2C1();
MasterWriteI2C1(0x01); //go back Home
IdleI2C1();
StopI2C1();
delay(10);
}
void CGRAM (void)
{
StartI2C1();
IdleI2C1();
MasterWriteI2C1(Slave);
IdleI2C1();
MasterWriteI2C1(Comsend);
IdleI2C1();
MasterWriteI2C1(0x38); //go to instructino table 0
IdleI2C1();
MasterWriteI2C1(0x40); //Set CGRAM address to 0x00
IdleI2C1();
StopI2C1();
delay(10);
StartI2C1();
IdleI2C1();
MasterWriteI2C1(Slave);
IdleI2C1();
MasterWriteI2C1(Datasend);
IdleI2C1();
MasterWriteI2C1(0x00); //write to first CGRAM address
IdleI2C1();
MasterWriteI2C1(0x1E);
IdleI2C1();
MasterWriteI2C1(0x18);
IdleI2C1();
MasterWriteI2C1(0x14);
IdleI2C1();
MasterWriteI2C1(0x12);
IdleI2C1();
MasterWriteI2C1(0x01);
IdleI2C1();
MasterWriteI2C1(0x00);
IdleI2C1();
MasterWriteI2C1(0x00); //8 bytes per character
IdleI2C1();
//continue writing to remaining CGRAM if desired
StopI2C1();
IdleI2C1();
}