/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_close(IN struct net_device *net_dev)
{
struct rt_rtmp_adapter *pAd = NULL;
GET_PAD_FROM_NET_DEV(pAd, net_dev);
/* Sanity check for pAd */
if (pAd == NULL)
return 0; /* close ok */
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
{
BOOLEAN Cancelled;
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) {
struct rt_mlme_disassoc_req DisReq;
struct rt_mlme_queue_elem *MsgElem =
(struct rt_mlme_queue_elem *)kmalloc(sizeof(struct rt_mlme_queue_elem),
MEM_ALLOC_FLAG);
if (MsgElem) {
COPY_MAC_ADDR(DisReq.Addr,
pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen =
sizeof(struct rt_mlme_disassoc_req);
NdisMoveMemory(MsgElem->Msg, &DisReq,
sizeof
(struct rt_mlme_disassoc_req));
/* Prevent to connect AP again in STAMlmePeriodicExec */
pAd->MlmeAux.AutoReconnectSsidLen = 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid,
pAd->MlmeAux.
AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState =
CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
}
RTMPusecDelay(1000);
}
RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer,
&Cancelled);
RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer,
&Cancelled);
}
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0; /* close ok */
}
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_close(IN struct net_device *net_dev)
{
RTMP_ADAPTER *pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev);
// Sanity check for pAd
if (pAd == NULL)
return 0; // close ok
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
BOOLEAN Cancelled;
#ifdef QOS_DLS_SUPPORT
// send DLS-TEAR_DOWN message,
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
// tear down local dls table entry
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
// tear down peer dls table entry
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif // QOS_DLS_SUPPORT //
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
// Prevent to connect AP again in STAMlmePeriodicExec
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
}
RTMPusecDelay(1000);
}
RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
// send wireless event to wpa_supplicant for infroming interface down.
RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // WPA_SUPPLICANT_SUPPORT //
}
#endif // CONFIG_STA_SUPPORT //
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0; // close ok
}
int rt28xx_close(IN PNET_DEV dev)
{
struct net_device * net_dev = (struct net_device *)dev;
RTMP_ADAPTER *pAd = net_dev->ml_priv;
BOOLEAN Cancelled = FALSE;
UINT32 i = 0;
#ifdef RT2870
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(unlink_wakeup);
DECLARE_WAITQUEUE(wait, current);
#endif
DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
if (pAd == NULL)
return 0;
{
#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) ||
RTMP_SET_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND) ||
RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))
#endif
#ifdef RT2870
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
#endif
{
#ifdef RT2860
AsicForceWakeup(pAd, RTMP_HALT);
#endif
#ifdef RT2870
AsicForceWakeup(pAd, TRUE);
#endif
}
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
RTMPusecDelay(1000);
}
#ifdef RT2870
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
#endif
#ifdef CCX_SUPPORT
RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &Cancelled);
#endif
RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
MlmeRadioOff(pAd);
#ifdef RT2860
pAd->bPCIclkOff = FALSE;
#endif
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
for (i = 0 ; i < NUM_OF_TX_RING; i++)
{
while (pAd->DeQueueRunning[i] == TRUE)
{
printk("Waiting for TxQueue[%d] done..........\n", i);
RTMPusecDelay(1000);
}
}
#ifdef RT2870
add_wait_queue (&unlink_wakeup, &wait);
pAd->wait = &unlink_wakeup;
i = 0;
while(i < 25)
{
unsigned long IrqFlags;
RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
if (pAd->PendingRx == 0)
{
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
break;
}
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
msleep(UNLINK_TIMEOUT_MS);
i++;
}
pAd->wait = NULL;
remove_wait_queue (&unlink_wakeup, &wait);
#endif
#ifdef RT2870
RT2870_TimerQ_Exit(pAd);
RT28xxThreadTerminate(pAd);
#endif
MlmeHalt(pAd);
kill_thread_task(pAd);
MacTableReset(pAd);
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
#ifdef RT2860
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
NICDisableInterrupt(pAd);
}
NICIssueReset(pAd);
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
RT28XX_IRQ_RELEASE(net_dev)
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
#endif
RTMPFreeTxRxRingMemory(pAd);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
ba_reordering_resource_release(pAd);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
return 0;
}
VOID RTMPInfClose(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef PROFILE_STORE
WriteDatThread(pAd);
RTMPusecDelay(1000);
#endif /* PROFILE_STORE */
#ifdef QOS_DLS_SUPPORT
/* send DLS-TEAR_DOWN message, */
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
/* tear down local dls table entry*/
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
/* tear down peer dls table entry*/
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif /* QOS_DLS_SUPPORT */
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
/* kfree(MsgElem);*/
os_free_mem(NULL, MsgElem);
}
RTMPusecDelay(1000);
}
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
/* send wireless event to wpa_supplicant for infroming interface down.*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
if (pAd->StaCfg.pWpsProbeReqIe)
{
/* kfree(pAd->StaCfg.pWpsProbeReqIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpsProbeReqIe);
pAd->StaCfg.pWpsProbeReqIe = NULL;
pAd->StaCfg.WpsProbeReqIeLen = 0;
}
if (pAd->StaCfg.pWpaAssocIe)
{
/* kfree(pAd->StaCfg.pWpaAssocIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpaAssocIe);
pAd->StaCfg.pWpaAssocIe = NULL;
pAd->StaCfg.WpaAssocIeLen = 0;
}
#endif /* WPA_SUPPLICANT_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
}
RTMP_BUILD_DRV_OPS_FUNCTION_BODY
#endif /* OS_ABL_FUNC_SUPPORT */
#endif /* LINUX */
int rt28xx_init(
IN VOID *pAdSrc,
IN PSTRING pDefaultMac,
IN PSTRING pHostName)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
UINT index;
UCHAR TmpPhy;
NDIS_STATUS Status;
if (pAd == NULL)
return FALSE;
#ifdef RT3290
DBGPRINT(RT_DEBUG_OFF, ("MACVersion=0x%x\n", pAd->MACVersion));
if (IS_RT3290(pAd))
{
UINT32 MacRegValue;
OSCCTL_STRUC osCtrl = {.word = 0};
CMB_CTRL_STRUC cmbCtrl = {.word = 0};
WLAN_FUN_CTRL_STRUC WlanFunCtrl = {.word = 0};
RTMPEnableWlan(pAd, TRUE, TRUE);
//
// Too much time for reading efuse(enter/exit L1), and our device will hang up
// Disable L1
//
RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word);
if (WlanFunCtrl.field.WLAN_EN == TRUE)
{
WlanFunCtrl.field.PCIE_APP0_CLK_REQ = TRUE;
RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word);
}
//Enable ROSC_EN first then CAL_REQ
RTMP_IO_READ32(pAd, OSCCTL, &osCtrl.word);
osCtrl.field.ROSC_EN = TRUE; //HW force
RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word);
osCtrl.field.ROSC_EN = TRUE; //HW force
osCtrl.field.CAL_REQ = TRUE;
osCtrl.field.REF_CYCLE = 0x27;
RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word);
RTMP_IO_READ32(pAd, CMB_CTRL, &cmbCtrl.word);
pAd->CmbCtrl.word = cmbCtrl.word;
// Overwrite default Coex Parameter
RTMP_IO_READ32(pAd, COEXCFG0, &MacRegValue);
MacRegValue &= ~(0xFF000000);
MacRegValue |= 0x5E000000;
RTMP_IO_WRITE32(pAd, COEXCFG0, MacRegValue);
}
if (IS_RT3290LE(pAd))
{
PLL_CTRL_STRUC PllCtrl;
RTMP_IO_READ32(pAd, PLL_CTRL, &PllCtrl.word);
PllCtrl.field.VCO_FIXED_CURRENT_CONTROL = 0x1;
RTMP_IO_WRITE32(pAd, PLL_CTRL, PllCtrl.word);
}
#endif /* RT3290 */
#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
/* If dirver doesn't wake up firmware here,*/
/* NICLoadFirmware will hang forever when interface is up again.*/
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
AUTO_WAKEUP_STRUC AutoWakeupCfg;
AsicForceWakeup(pAd, TRUE);
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
}
}
#endif /* PCIE_PS_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */
/* reset Adapter flags*/
RTMP_CLEAR_FLAGS(pAd);
/* Init BssTab & ChannelInfo tabbles for auto channel select.*/
#ifdef DOT11_N_SUPPORT
/* Allocate BA Reordering memory*/
if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE)
goto err1;
#endif /* DOT11_N_SUPPORT */
/* Make sure MAC gets ready.*/
index = 0;
if (WaitForAsicReady(pAd) != TRUE)
goto err1;
DBGPRINT(RT_DEBUG_TRACE, ("MAC[Ver:Rev=0x%08x]\n", pAd->MACVersion));
if (MAX_LEN_OF_MAC_TABLE > MAX_AVAILABLE_CLIENT_WCID(pAd))
{
DBGPRINT(RT_DEBUG_ERROR, ("MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!\n"));
goto err1;
}
#ifdef RTMP_MAC_PCI
#if defined(RT3090) || defined(RT3592) || defined(RT3390) || defined(RT3593) || defined(RT5390) || defined(RT5392) || defined(RT5592)
/*Iverson patch PCIE L1 issue to make sure that driver can be read,write ,BBP and RF register at pcie L.1 level */
if ((IS_RT3090(pAd) || IS_RT3572(pAd) ||IS_RT3390(pAd) || IS_RT3593(pAd)
|| IS_RT5390(pAd) || IS_RT5392(pAd) || IS_RT5592(pAd))
&&pAd->infType==RTMP_DEV_INF_PCIE)
{
UINT32 MacValue = 0;
RTMP_IO_READ32(pAd, AUX_CTRL, &MacValue);
MacValue |= 0x402;
RTMP_IO_WRITE32(pAd, AUX_CTRL, MacValue);
DBGPRINT(RT_DEBUG_TRACE, ("AUX_CTRL = 0x%x\n", MacValue));
}
#endif
/* To fix driver disable/enable hang issue when radio off*/
RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2);
#endif /* RTMP_MAC_PCI */
/* Disable DMA*/
RT28XXDMADisable(pAd);
/* Load 8051 firmware*/
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
goto err1;
}
NICLoadRateSwitchingParams(pAd);
/* Disable interrupts here which is as soon as possible*/
/* This statement should never be true. We might consider to remove it later*/
#ifdef RTMP_MAC_PCI
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
#endif /* RTMP_MAC_PCI */
#ifdef RESOURCE_PRE_ALLOC
Status = RTMPInitTxRxRingMemory(pAd);
#else
Status = RTMPAllocTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status));
goto err2;
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
/* initialize MLME*/
Status = RtmpMgmtTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err3;
Status = MlmeInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
goto err4;
}
#ifdef RMTP_RBUS_SUPPORT
#ifdef VIDEO_TURBINE_SUPPORT
VideoConfigInit(pAd);
#endif /* VIDEO_TURBINE_SUPPORT */
#endif /* RMTP_RBUS_SUPPORT */
/* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default*/
UserCfgInit(pAd);
Status = RtmpNetTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err5;
/* COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);*/
/* pAd->bForcePrintTX = TRUE;*/
CfgInitHook(pAd);
#ifdef BLOCK_NET_IF
initblockQueueTab(pAd);
#endif /* BLOCK_NET_IF */
Status = MeasureReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
Status = TpcReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
/* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset*/
Status = NICInitializeAdapter(pAd, TRUE);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
if (Status != NDIS_STATUS_SUCCESS)
goto err6;
}
/* Read parameters from Config File */
/* unknown, it will be updated in NICReadEEPROMParameters */
pAd->RfIcType = RFIC_UNKNOWN;
Status = RTMPReadParametersHook(pAd);
#ifdef CONFIG_STA_SUPPORT
#ifdef CREDENTIAL_STORE
RecoverConnectInfo(pAd);
#endif /* CREDENTIAL_STORE */
#endif /* CONFIG_STA_SUPPORT */
DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status));
goto err6;
}
#ifdef DOT11_N_SUPPORT
/*Init Ba Capability parameters.*/
/* RT28XX_BA_INIT(pAd);*/
pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
/* UPdata to HT IE*/
pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
#endif /* DOT11_N_SUPPORT */
/* after reading Registry, we now know if in AP mode or STA mode*/
/* Load 8051 firmware; crash when FW image not existent*/
/* Status = NICLoadFirmware(pAd);*/
/* if (Status != NDIS_STATUS_SUCCESS)*/
/* break;*/
DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
/* We should read EEPROM for all cases. rt2860b*/
NICReadEEPROMParameters(pAd, (PSTRING)pDefaultMac);
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
#ifdef LED_CONTROL_SUPPORT
/* Send LED Setting to MCU */
RTMPInitLEDMode(pAd);
#endif /* LED_CONTROL_SUPPORT */
NICInitAsicFromEEPROM(pAd); /* rt2860b */
#ifdef RTMP_FREQ_CALIBRATION_SUPPORT
#ifdef CONFIG_STA_SUPPORT
/* Initialize the frequency calibration*/
if (pAd->chipCap.FreqCalibrationSupport)
FrequencyCalibration(pAd);
#endif /* CONFIG_STA_SUPPORT */
#endif /* RTMP_FREQ_CALIBRATION_SUPPORT */
#ifdef RTMP_INTERNAL_TX_ALC
/* Initialize the desired TSSI table*/
RTMP_CHIP_ASIC_TSSI_TABLE_INIT(pAd);
#endif /* RTMP_INTERNAL_TX_ALC */
#ifdef RTMP_TEMPERATURE_COMPENSATION
/* Temperature compensation, initialize the lookup table */
DBGPRINT(RT_DEBUG_OFF, ("bAutoTxAgcG = %d\n", pAd->bAutoTxAgcG));
if (pAd->chipCap.bTempCompTxALC && pAd->bAutoTxAgcG)
InitLookupTable(pAd);
#endif /* RTMP_TEMPERATURE_COMPENSATION */
#ifdef RTMP_FREQ_CALIBRATION_SUPPORT
#ifdef CONFIG_STA_SUPPORT
if (pAd->chipCap.FreqCalibrationSupport)
InitFrequencyCalibration(pAd);
#endif /* CONFIG_STA_SUPPORT */
#endif /* RTMP_FREQ_CALIBRATION_SUPPORT */
/* Set PHY to appropriate mode*/
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
#endif /* DOT11_N_SUPPORT */
/* No valid channels.*/
if (pAd->ChannelListNum == 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
goto err6;
}
#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]));
#endif /* DOT11_N_SUPPORT */
/* APInitialize(pAd);*/
#ifdef IKANOS_VX_1X0
VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
#endif /* IKANOS_VX_1X0 */
/*
Some modules init must be called before APStartUp().
Or APStartUp() will make up beacon content and call
other modules API to get some information to fill.
*/
#ifdef CONFIG_TSO_SUPPORT
if (RTMP_TEST_MORE_FLAG(pAd, fRTMP_ADAPTER_TSO_SUPPORT))
RTMPTsoEnable(pAd);
#endif /* CONFIG_TSO_SUPPORT */
if (pAd && (Status != NDIS_STATUS_SUCCESS))
{
/* Undo everything if it failed*/
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
/* NdisMDeregisterInterrupt(&pAd->Interrupt);*/
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
/* RTMPFreeAdapter(pAd); we will free it in disconnect()*/
}
else if (pAd)
{
/* Microsoft HCT require driver send a disconnect event after driver initialization.*/
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
OPSTATUS_CLEAR_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
}/* end of else*/
/* Set up the Mac address*/
#ifdef CONFIG_STA_SUPPORT
RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], (PUCHAR)(pAd->StaCfg.dev_name));
#endif /* CONFIG_STA_SUPPORT */
/* Various AP function init*/
#ifdef UAPSD_SUPPORT
UAPSD_Init(pAd);
#endif /* UAPSD_SUPPORT */
/* assign function pointers*/
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
/* send wireless event to wpa_supplicant for infroming interface up.*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_UP, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
#endif /* WPA_SUPPLICANT_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
/* auto-fall back settings */
#ifdef RANGE_EXTEND
RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, 0xedcba980);
#endif // RANGE_EXTEND //
#ifdef DOT11N_SS3_SUPPORT
if (pAd->CommonCfg.TxStream >= 3)
{
RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_0, 0x12111008);
RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_1, 0x16151413);
}
#endif /* DOT11N_SS3_SUPPORT */
#ifdef STREAM_MODE_SUPPORT
RtmpStreamModeInit(pAd);
#endif /* STREAM_MODE_SUPPORT */
#ifdef DOT11_N_SUPPORT
#endif /* DOT11_N_SUPPORT */
#ifdef RT3290
if (IS_RT3290(pAd))
{
WLAN_FUN_CTRL_STRUC WlanFunCtrl = {.word = 0};
RTMP_MAC_PWRSV_EN(pAd, TRUE, TRUE);
//
// Too much time for reading efuse(enter/exit L1), and our device will hang up
// Enable L1
//
RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word);
if (WlanFunCtrl.field.WLAN_EN == TRUE)
{
WlanFunCtrl.field.PCIE_APP0_CLK_REQ = FALSE;
RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word);
}
}
#endif /* RT3290 */
DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));
return TRUE;
/*err7:
APStop(pAd);*/
err6:
#ifdef IGMP_SNOOP_SUPPORT
MultiCastFilterTableReset(&pAd->pMulticastFilterTable);
#endif /* IGMP_SNOOP_SUPPORT */
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
err5:
RtmpNetTaskExit(pAd);
UserCfgExit(pAd);
err4:
MlmeHalt(pAd);
RTMP_TimerListRelease(pAd);
err3:
RtmpMgmtTaskExit(pAd);
#ifdef RTMP_TIMER_TASK_SUPPORT
NdisFreeSpinLock(&pAd->TimerQLock);
#endif /* RTMP_TIMER_TASK_SUPPORT */
err2:
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
err1:
#ifdef RT3290
if (IS_RT3290(pAd))
RTMPEnableWlan(pAd, FALSE, FALSE);
#endif /* RT3290 */
#ifdef DOT11_N_SUPPORT
if(pAd->mpdu_blk_pool.mem)
os_free_mem(pAd, pAd->mpdu_blk_pool.mem); /* free BA pool*/
#endif /* DOT11_N_SUPPORT */
/* shall not set priv to NULL here because the priv didn't been free yet.*/
/*net_dev->priv = 0;*/
#ifdef INF_AMAZON_SE
err0:
#endif /* INF_AMAZON_SE */
#ifdef ST
err0:
#endif /* ST */
DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
return FALSE;
}
VOID RTMPDrvOpen(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
/* Enable Interrupt*/
RTMP_IRQ_ENABLE(pAd);
/* Now Enable RxTx*/
RTMPEnableRxTx(pAd);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);
{
UINT32 reg = 0;
RTMP_IO_READ32(pAd, 0x1300, ®); /* clear garbage interrupts*/
printk("0x1300 = %08x\n", reg);
}
{
/* u32 reg;*/
/* UINT8 byte;*/
/* u16 tmp;*/
/* RTMP_IO_READ32(pAd, XIFS_TIME_CFG, ®);*/
/* tmp = 0x0805;*/
/* reg = (reg & 0xffff0000) | tmp;*/
/* RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg);*/
}
#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
RTMPInitPCIeLinkCtrlValue(pAd);
#endif /* PCIE_PS_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
/*
To reduce connection time,
do auto reconnect here instead of waiting STAMlmePeriodicExec to do auto reconnect.
*/
if (pAd->OpMode == OPMODE_STA)
MlmeAutoReconnectLastSSID(pAd);
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
}
VOID RTMPDrvClose(
IN VOID *pAdSrc,
IN VOID *net_dev)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
BOOLEAN Cancelled;
UINT32 i = 0;
Cancelled = FALSE;
#ifdef CONFIG_STA_SUPPORT
#ifdef CREDENTIAL_STORE
if (pAd->IndicateMediaState == NdisMediaStateConnected)
{
StoreConnectInfo(pAd);
}
else
{
RTMP_SEM_LOCK(&pAd->StaCtIf.Lock);
pAd->StaCtIf.Changeable = FALSE;
RTMP_SEM_UNLOCK(&pAd->StaCtIf.Lock);
}
#endif /* CREDENTIAL_STORE */
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef PCIE_PS_SUPPORT
RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE);
#endif /* PCIE_PS_SUPPORT */
/* If dirver doesn't wake up firmware here,*/
/* NICLoadFirmware will hang forever when interface is up again.*/
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
{
AsicForceWakeup(pAd, TRUE);
}
#ifdef RTMP_MAC_PCI
pAd->bPCIclkOff = FALSE;
#endif /* RTMP_MAC_PCI */
}
#endif /* CONFIG_STA_SUPPORT */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
#ifdef EXT_BUILD_CHANNEL_LIST
if (pAd->CommonCfg.pChDesp != NULL)
os_free_mem(NULL, pAd->CommonCfg.pChDesp);
pAd->CommonCfg.pChDesp = NULL;
pAd->CommonCfg.DfsType = MAX_RD_REGION;
pAd->CommonCfg.bCountryFlag = 0;
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef WDS_SUPPORT
WdsDown(pAd);
#endif /* WDS_SUPPORT */
for (i = 0 ; i < NUM_OF_TX_RING; i++)
{
while (pAd->DeQueueRunning[i] == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("Waiting for TxQueue[%d] done..........\n", i));
RTMPusecDelay(1000);
}
}
/* Stop Mlme state machine*/
MlmeHalt(pAd);
/* Close net tasklets*/
RtmpNetTaskExit(pAd);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
MacTableReset(pAd);
#if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT)
if (pAd->WOW_Cfg.bEnable == TRUE)
RT28xxUsbAsicWOWEnable(pAd);
else
#endif /* WOW_SUPPORT */
MlmeRadioOff(pAd);
}
#endif /* CONFIG_STA_SUPPORT */
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
#ifdef LED_CONTROL_SUPPORT
RTMPExitLEDMode(pAd);
#endif // LED_CONTROL_SUPPORT
/* Close kernel threads*/
RtmpMgmtTaskExit(pAd);
#ifdef RTMP_MAC_PCI
{
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
/* Receive packets to clear DMA index after disable interrupt. */
/*RTMPHandleRxDoneInterrupt(pAd);*/
/* put to radio off to save power when driver unload. After radiooff, can't write /read register. So need to finish all */
/* register access before Radio off.*/
#ifdef RTMP_PCI_SUPPORT
if (pAd->infType == RTMP_DEV_INF_PCI || pAd->infType == RTMP_DEV_INF_PCIE)
{
BOOLEAN brc;
brc=RT28xxPciAsicRadioOff(pAd, RTMP_HALT, 0);
/*In solution 3 of 3090F, the bPCIclkOff will be set to TRUE after calling RT28xxPciAsicRadioOff*/
#ifdef PCIE_PS_SUPPORT
pAd->bPCIclkOff = FALSE;
#endif /* PCIE_PS_SUPPORT */
if (brc==FALSE)
{
DBGPRINT(RT_DEBUG_ERROR,("%s call RT28xxPciAsicRadioOff fail !!\n", __FUNCTION__));
}
}
#endif /* RTMP_PCI_SUPPORT */
}
#endif /* RTMP_MAC_PCI */
/* Free IRQ*/
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
#ifdef RTMP_MAC_PCI
/* Deregister interrupt function*/
RTMP_OS_IRQ_RELEASE(pAd, net_dev);
#endif /* RTMP_MAC_PCI */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
/* Free Ring or USB buffers*/
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
/* Free Ring or USB buffers*/
RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
#ifdef DOT11_N_SUPPORT
/* Free BA reorder resource*/
ba_reordering_resource_release(pAd);
#endif /* DOT11_N_SUPPORT */
UserCfgExit(pAd); /* must after ba_reordering_resource_release */
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
/*+++Modify by woody to solve the bulk fail+++*/
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
}
#endif /* CONFIG_STA_SUPPORT */
/* clear MAC table */
/* TODO: do not clear spin lock, such as fLastChangeAccordingMfbLock */
NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));
/* release all timers */
RTMPusecDelay(2000);
RTMP_TimerListRelease(pAd);
#ifdef RTMP_TIMER_TASK_SUPPORT
NdisFreeSpinLock(&pAd->TimerQLock);
#endif /* RTMP_TIMER_TASK_SUPPORT */
}
VOID RTMPInfClose(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef PROFILE_STORE
WriteDatThread(pAd);
RTMPusecDelay(1000);
#endif /* PROFILE_STORE */
#ifdef QOS_DLS_SUPPORT
/* send DLS-TEAR_DOWN message, */
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
/* tear down local dls table entry*/
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
/* tear down peer dls table entry*/
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif /* QOS_DLS_SUPPORT */
if (INFRA_ON(pAd) &&
#if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT) /* In WOW state, can't issue disassociation reqeust */
pAd->WOW_Cfg.bEnable == FALSE &&
#endif /* WOW_SUPPORT */
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
/* kfree(MsgElem);*/
os_free_mem(NULL, MsgElem);
}
RTMPusecDelay(1000);
}
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
/* send wireless event to wpa_supplicant for infroming interface down.*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
if (pAd->StaCfg.pWpsProbeReqIe)
{
/* kfree(pAd->StaCfg.pWpsProbeReqIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpsProbeReqIe);
pAd->StaCfg.pWpsProbeReqIe = NULL;
pAd->StaCfg.WpsProbeReqIeLen = 0;
}
if (pAd->StaCfg.pWpaAssocIe)
{
/* kfree(pAd->StaCfg.pWpaAssocIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpaAssocIe);
pAd->StaCfg.pWpaAssocIe = NULL;
pAd->StaCfg.WpaAssocIeLen = 0;
}
#endif /* WPA_SUPPLICANT_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
}
PNET_DEV RtmpPhyNetDevMainCreate(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
PNET_DEV pDevNew;
UINT32 MC_RowID = 0, IoctlIF = 0;
pAd = pAd;
#ifdef MULTIPLE_CARD_SUPPORT
MC_RowID = pAd->MC_RowID;
#endif /* MULTIPLE_CARD_SUPPORT */
#ifdef HOSTAPD_SUPPORT
IoctlIF = pAd->IoctlIF;
#endif /* HOSTAPD_SUPPORT */
pDevNew = RtmpOSNetDevCreate((INT32)MC_RowID, (UINT32 *)&IoctlIF,
INT_MAIN, 0, sizeof(PRTMP_ADAPTER), INF_MAIN_DEV_NAME);
#ifdef HOSTAPD_SUPPORT
pAd->IoctlIF = IoctlIF;
#endif /* HOSTAPD_SUPPORT */
return pDevNew;
}
RTMP_BUILD_DRV_OPS_FUNCTION_BODY
#endif /* OS_ABL_FUNC_SUPPORT */
#endif /* LINUX */
int rt28xx_init(
IN VOID *pAdSrc,
IN PSTRING pDefaultMac,
IN PSTRING pHostName)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
UINT index;
UCHAR TmpPhy;
NDIS_STATUS Status;
if (pAd == NULL)
return FALSE;
#ifdef RT3290
DBGPRINT(RT_DEBUG_OFF, ("MACVersion=0x%x\n", pAd->MACVersion));
if (IS_RT3290(pAd))
{
UINT32 MacRegValue;
OSCCTL_STRUC osCtrl = {.word = 0};
CMB_CTRL_STRUC cmbCtrl = {.word = 0};
WLAN_FUN_CTRL_STRUC WlanFunCtrl = {.word = 0};
RTMPEnableWlan(pAd, TRUE, TRUE);
//
// Too much time for reading efuse(enter/exit L1), and our device will hang up
// Disable L1
//
RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word);
if (WlanFunCtrl.field.WLAN_EN == TRUE)
{
WlanFunCtrl.field.PCIE_APP0_CLK_REQ = TRUE;
RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word);
}
//Enable ROSC_EN first then CAL_REQ
RTMP_IO_READ32(pAd, OSCCTL, &osCtrl.word);
osCtrl.field.ROSC_EN = TRUE; //HW force
RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word);
osCtrl.field.ROSC_EN = TRUE; //HW force
osCtrl.field.CAL_REQ = TRUE;
osCtrl.field.REF_CYCLE = 0x27;
RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word);
RTMP_IO_READ32(pAd, CMB_CTRL, &cmbCtrl.word);
pAd->CmbCtrl.word = cmbCtrl.word;
// Overwrite default Coex Parameter
RTMP_IO_READ32(pAd, COEXCFG0, &MacRegValue);
MacRegValue &= ~(0xFF000000);
MacRegValue |= 0x5E000000;
RTMP_IO_WRITE32(pAd, COEXCFG0, MacRegValue);
}
if (IS_RT3290LE(pAd))
{
PLL_CTRL_STRUC PllCtrl;
RTMP_IO_READ32(pAd, PLL_CTRL, &PllCtrl.word);
PllCtrl.field.VCO_FIXED_CURRENT_CONTROL = 0x1;
RTMP_IO_WRITE32(pAd, PLL_CTRL, PllCtrl.word);
}
#endif /* RT3290 */
#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
/* If dirver doesn't wake up firmware here,*/
/* NICLoadFirmware will hang forever when interface is up again.*/
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
AUTO_WAKEUP_STRUC AutoWakeupCfg;
AsicForceWakeup(pAd, TRUE);
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
}
}
#endif /* PCIE_PS_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */
/* reset Adapter flags*/
RTMP_CLEAR_FLAGS(pAd);
/* Init BssTab & ChannelInfo tabbles for auto channel select.*/
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
/*#ifdef AUTO_CH_SELECT_ENHANCE*/
AutoChBssTableInit(pAd);
ChannelInfoInit(pAd);
/*#endif AUTO_CH_SELECT_ENHANCE */
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* Allocate BA Reordering memory*/
if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE)
goto err1;
#endif /* DOT11_N_SUPPORT */
/* Make sure MAC gets ready.*/
index = 0;
if (WaitForAsicReady(pAd) != TRUE)
goto err1;
DBGPRINT(RT_DEBUG_TRACE, ("MAC[Ver:Rev=0x%08x]\n", pAd->MACVersion));
if (MAX_LEN_OF_MAC_TABLE > MAX_AVAILABLE_CLIENT_WCID(pAd))
{
DBGPRINT(RT_DEBUG_ERROR, ("MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!\n"));
goto err1;
}
/* Disable DMA*/
RT28XXDMADisable(pAd);
/* Load 8051 firmware*/
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
goto err1;
}
NICLoadRateSwitchingParams(pAd);
/* Disable interrupts here which is as soon as possible*/
/* This statement should never be true. We might consider to remove it later*/
#ifdef RESOURCE_PRE_ALLOC
Status = RTMPInitTxRxRingMemory(pAd);
#else
Status = RTMPAllocTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status));
goto err2;
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
/* initialize MLME*/
Status = RtmpMgmtTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err3;
Status = MlmeInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
goto err4;
}
#ifdef RMTP_RBUS_SUPPORT
#ifdef VIDEO_TURBINE_SUPPORT
VideoConfigInit(pAd);
#endif /* VIDEO_TURBINE_SUPPORT */
#endif /* RMTP_RBUS_SUPPORT */
/* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default*/
UserCfgInit(pAd);
Status = RtmpNetTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err5;
/* COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);*/
/* pAd->bForcePrintTX = TRUE;*/
CfgInitHook(pAd);
#ifdef CONFIG_AP_SUPPORT
if ((pAd->OpMode == OPMODE_AP)
#ifdef P2P_SUPPORT
|| TRUE
#endif /* P2P_SUPPORT */
)
APInitialize(pAd);
#endif /* CONFIG_AP_SUPPORT */
#ifdef BLOCK_NET_IF
initblockQueueTab(pAd);
#endif /* BLOCK_NET_IF */
Status = MeasureReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
Status = TpcReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
/* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset*/
Status = NICInitializeAdapter(pAd, TRUE);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
if (Status != NDIS_STATUS_SUCCESS)
goto err6;
}
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
}
#endif /* CONFIG_AP_SUPPORT */
/* Read parameters from Config File */
/* unknown, it will be updated in NICReadEEPROMParameters */
pAd->RfIcType = RFIC_UNKNOWN;
Status = RTMPReadParametersHook(pAd);
#ifdef CONFIG_STA_SUPPORT
#ifdef CREDENTIAL_STORE
RecoverConnectInfo(pAd);
#endif /* CREDENTIAL_STORE */
#endif /* CONFIG_STA_SUPPORT */
DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status));
goto err6;
}
#ifdef RTMP_MAC_USB
pAd->CommonCfg.bMultipleIRP = FALSE;
if (pAd->CommonCfg.bMultipleIRP)
pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
else
pAd->CommonCfg.NumOfBulkInIRP = 1;
#endif /* RTMP_MAC_USB */
#ifdef DOT11_N_SUPPORT
/*Init Ba Capability parameters.*/
/* RT28XX_BA_INIT(pAd);*/
pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
/* UPdata to HT IE*/
pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
#endif /* DOT11_N_SUPPORT */
/* after reading Registry, we now know if in AP mode or STA mode*/
/* Load 8051 firmware; crash when FW image not existent*/
/* Status = NICLoadFirmware(pAd);*/
/* if (Status != NDIS_STATUS_SUCCESS)*/
/* break;*/
DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
/* We should read EEPROM for all cases. rt2860b*/
NICReadEEPROMParameters(pAd, (PSTRING)pDefaultMac);
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
#ifdef LED_CONTROL_SUPPORT
/* Send LED Setting to MCU */
RTMPInitLEDMode(pAd);
#endif /* LED_CONTROL_SUPPORT */
NICInitAsicFromEEPROM(pAd); /* rt2860b */
#ifdef RALINK_ATE
if (ATEInit(pAd) != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s(): ATE initialization failed !\n", __FUNCTION__));
goto err6;
}
#endif /* RALINK_ATE */
#ifdef RTMP_FREQ_CALIBRATION_SUPPORT
#ifdef CONFIG_STA_SUPPORT
/* Initialize the frequency calibration*/
if (pAd->chipCap.FreqCalibrationSupport)
FrequencyCalibration(pAd);
#endif /* CONFIG_STA_SUPPORT */
#endif /* RTMP_FREQ_CALIBRATION_SUPPORT */
#ifdef RTMP_INTERNAL_TX_ALC
/* Initialize the desired TSSI table*/
RTMP_CHIP_ASIC_TSSI_TABLE_INIT(pAd);
#endif /* RTMP_INTERNAL_TX_ALC */
#ifdef RTMP_TEMPERATURE_COMPENSATION
/* Temperature compensation, initialize the lookup table */
DBGPRINT(RT_DEBUG_OFF, ("bAutoTxAgcG = %d\n", pAd->bAutoTxAgcG));
if (pAd->chipCap.bTempCompTxALC && pAd->bAutoTxAgcG)
InitLookupTable(pAd);
#endif /* RTMP_TEMPERATURE_COMPENSATION */
#ifdef RTMP_FREQ_CALIBRATION_SUPPORT
#ifdef CONFIG_STA_SUPPORT
if (pAd->chipCap.FreqCalibrationSupport)
InitFrequencyCalibration(pAd);
#endif /* CONFIG_STA_SUPPORT */
#endif /* RTMP_FREQ_CALIBRATION_SUPPORT */
/* Set PHY to appropriate mode*/
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
#endif /* DOT11_N_SUPPORT */
/* No valid channels.*/
if (pAd->ChannelListNum == 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
goto err6;
}
#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]));
#endif /* DOT11_N_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
#ifdef AP_QLOAD_SUPPORT
/* init QBSS Element */
QBSS_LoadInit(pAd);
#endif /* AP_QLOAD_SUPPORT */
}
#endif /* CONFIG_AP_SUPPORT */
/* APInitialize(pAd);*/
#ifdef IKANOS_VX_1X0
VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
#endif /* IKANOS_VX_1X0 */
#ifdef RTMP_MAC_USB
AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02, FALSE);
RTMPusecDelay(10000);
#endif /* RTMP_MAC_USB */
#ifdef RALINK_ATE
#ifdef RT5592
#ifdef RTMP_RF_RW_SUPPORT
/* both for RT5572 and RT5592 */
if (IS_RT5592(pAd))
{
RT55x2ATEFilterCalibration(pAd);
}
#endif /* RTMP_RF_RW_SUPPORT */
#endif /* RT5592 */
#endif /* RALINK_ATE */
#ifdef CONFIG_AP_SUPPORT
/* Initialize RF register to default value*/
if (pAd->OpMode == OPMODE_AP)
{
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
}
#endif /* CONFIG_AP_SUPPORT */
/*
Some modules init must be called before APStartUp().
Or APStartUp() will make up beacon content and call
other modules API to get some information to fill.
*/
#ifdef CONFIG_TSO_SUPPORT
if (RTMP_TEST_MORE_FLAG(pAd, fRTMP_ADAPTER_TSO_SUPPORT))
RTMPTsoEnable(pAd);
#endif /* CONFIG_TSO_SUPPORT */
if (pAd && (Status != NDIS_STATUS_SUCCESS))
{
/* Undo everything if it failed*/
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
/* NdisMDeregisterInterrupt(&pAd->Interrupt);*/
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
/* RTMPFreeAdapter(pAd); we will free it in disconnect()*/
}
else if (pAd)
{
/* Microsoft HCT require driver send a disconnect event after driver initialization.*/
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
OPSTATUS_CLEAR_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
if (pAd->ApCfg.bAutoChannelAtBootup || (pAd->CommonCfg.Channel == 0))
{
UINT8 BBPValue = 0;
/* Enable Interrupt first due to we need to scan channel to receive beacons.*/
RTMP_IRQ_ENABLE(pAd);
#ifdef RTMP_MAC_USB
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
/* Support multiple BulkIn IRP,*/
/* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.*/
for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
{
RTUSBBulkReceive(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
}
#endif /* RTMP_MAC_USB */
/* Now Enable RxTx*/
RTMPEnableRxTx(pAd);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);
/* Let BBP register at 20MHz to do scan */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
BBPValue &= (~0x18);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
DBGPRINT(RT_DEBUG_ERROR, ("SYNC - BBP R4 to 20MHz.l\n"));
/* Now we can receive the beacon and do the listen beacon*/
/* use default BW to select channel*/
pAd->CommonCfg.Channel = AP_AUTO_CH_SEL(pAd, pAd->ApCfg.AutoChannelAlg);
pAd->ApCfg.bAutoChannelAtBootup = FALSE;
}
#ifdef DOT11_N_SUPPORT
/* If phymode > PHY_11ABGN_MIXED and BW=40 check extension channel, after select channel */
N_ChannelCheck(pAd);
#ifdef DOT11N_DRAFT3
/*
We only do this Overlapping BSS Scan when system up, for the
other situation of channel changing, we depends on station's
report to adjust ourself.
*/
if (pAd->CommonCfg.bForty_Mhz_Intolerant == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("Disable 20/40 BSSCoex Channel Scan(BssCoex=%d, 40MHzIntolerant=%d)\n",
pAd->CommonCfg.bBssCoexEnable,
pAd->CommonCfg.bForty_Mhz_Intolerant));
}
else if(pAd->CommonCfg.bBssCoexEnable == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("Enable 20/40 BSSCoex Channel Scan(BssCoex=%d)\n",
pAd->CommonCfg.bBssCoexEnable));
APOverlappingBSSScan(pAd);
}
RTMP_11N_D3_TimerInit(pAd);
/* RTMPInitTimer(pAd, &pAd->CommonCfg.Bss2040CoexistTimer, GET_TIMER_FUNCTION(Bss2040CoexistTimeOut), pAd, FALSE);*/
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
APStartUp(pAd);
DBGPRINT(RT_DEBUG_OFF, ("Main bssid = %02x:%02x:%02x:%02x:%02x:%02x\n",
PRINT_MAC(pAd->ApCfg.MBSSID[BSS0].Bssid)));
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef RTMP_MAC_USB
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
/* Support multiple BulkIn IRP,*/
/* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.*/
for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
{
RTUSBBulkReceive(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
}
#endif /* RTMP_MAC_USB */
}/* end of else*/
/* Set up the Mac address*/
#ifdef CONFIG_AP_SUPPORT
#ifndef P2P_APCLI_SUPPORT
RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], NULL);
#endif /* P2P_APCLI_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], (PUCHAR)(pAd->StaCfg.dev_name));
#endif /* CONFIG_STA_SUPPORT */
/* Various AP function init*/
#ifdef CONFIG_AP_SUPPORT
#ifdef P2P_SUPPORT
#else
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
#endif /* P2P_SUPPORT */
{
#ifdef MBSS_SUPPORT
/* the function can not be moved to RT2860_probe() even register_netdev()
is changed as register_netdevice().
Or in some PC, kernel will panic (Fedora 4) */
/* RT28xx_MBSS_Init(pAd, pAd->net_dev); os abl move to rt_main_dev.c*/
#endif /* MBSS_SUPPORT */
#ifdef APCLI_SUPPORT
/* RT28xx_ApCli_Init(pAd, pAd->net_dev);*/
#endif /* APCLI_SUPPORT */
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef UAPSD_SUPPORT
UAPSD_Init(pAd);
#endif /* UAPSD_SUPPORT */
/* assign function pointers*/
#ifdef MAT_SUPPORT
/* init function pointers, used in OS_ABL */
RTMP_MATOpsInit(pAd);
#endif /* MAT_SUPPORT */
#ifdef P2P_SUPPORT
/* RTMP_P2P_Init(pAd, pAd->net_dev); */
#endif /* P2P_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
#ifdef MAT_SUPPORT
MATEngineInit(pAd);
#endif /* MAT_SUPPORT */
#ifdef CLIENT_WDS
CliWds_ProxyTabInit(pAd);
#endif /* CLIENT_WDS */
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef DOT11Z_TDLS_SUPPORT
TDLS_Table_Init(pAd);
#endif /* DOT11Z_TDLS_SUPPORT */
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
/* send wireless event to wpa_supplicant for infroming interface up.*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_UP, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
#endif /* WPA_SUPPLICANT_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
/* auto-fall back settings */
#ifdef RANGE_EXTEND
RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, 0xedcba980);
#endif // RANGE_EXTEND //
#ifdef DOT11N_SS3_SUPPORT
if (pAd->CommonCfg.TxStream >= 3)
{
RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_0, 0x12111008);
RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_1, 0x16151413);
}
#endif /* DOT11N_SS3_SUPPORT */
#ifdef STREAM_MODE_SUPPORT
RtmpStreamModeInit(pAd);
#endif /* STREAM_MODE_SUPPORT */
#ifdef DOT11_N_SUPPORT
#endif /* DOT11_N_SUPPORT */
#ifdef RT3290
if (IS_RT3290(pAd))
{
WLAN_FUN_CTRL_STRUC WlanFunCtrl = {.word = 0};
RTMP_MAC_PWRSV_EN(pAd, TRUE, TRUE);
//
// Too much time for reading efuse(enter/exit L1), and our device will hang up
// Enable L1
//
RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word);
if (WlanFunCtrl.field.WLAN_EN == TRUE)
{
WlanFunCtrl.field.PCIE_APP0_CLK_REQ = FALSE;
RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word);
}
}
#endif /* RT3290 */
DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));
return TRUE;
/*err7:
APStop(pAd);*/
err6:
#ifdef IGMP_SNOOP_SUPPORT
MultiCastFilterTableReset(&pAd->pMulticastFilterTable);
#endif /* IGMP_SNOOP_SUPPORT */
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
err5:
RtmpNetTaskExit(pAd);
UserCfgExit(pAd);
err4:
MlmeHalt(pAd);
RTMP_TimerListRelease(pAd);
err3:
RtmpMgmtTaskExit(pAd);
#ifdef RTMP_TIMER_TASK_SUPPORT
NdisFreeSpinLock(&pAd->TimerQLock);
#endif /* RTMP_TIMER_TASK_SUPPORT */
err2:
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
err1:
#ifdef CONFIG_AP_SUPPORT
/* Free BssTab & ChannelInfo tabbles.*/
AutoChBssTableDestroy(pAd);
ChannelInfoDestroy(pAd);
#endif /* CONFIG_AP_SUPPORT */
#ifdef RT3290
if (IS_RT3290(pAd))
RTMPEnableWlan(pAd, FALSE, FALSE);
#endif /* RT3290 */
#ifdef DOT11_N_SUPPORT
if(pAd->mpdu_blk_pool.mem)
os_free_mem(pAd, pAd->mpdu_blk_pool.mem); /* free BA pool*/
#endif /* DOT11_N_SUPPORT */
/* shall not set priv to NULL here because the priv didn't been free yet.*/
/*net_dev->priv = 0;*/
#ifdef INF_AMAZON_SE
err0:
#endif /* INF_AMAZON_SE */
#ifdef ST
err0:
#endif /* ST */
DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
return FALSE;
}
VOID RTMPDrvOpen(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
/* Enable Interrupt*/
RTMP_IRQ_ENABLE(pAd);
/* Now Enable RxTx*/
RTMPEnableRxTx(pAd);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);
{
UINT32 reg = 0;
RTMP_IO_READ32(pAd, 0x1300, ®); /* clear garbage interrupts*/
printk("0x1300 = %08x\n", reg);
}
{
/* u32 reg;*/
/* UINT8 byte;*/
/* u16 tmp;*/
/* RTMP_IO_READ32(pAd, XIFS_TIME_CFG, ®);*/
/* tmp = 0x0805;*/
/* reg = (reg & 0xffff0000) | tmp;*/
/* RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg);*/
}
#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
RTMPInitPCIeLinkCtrlValue(pAd);
#endif /* PCIE_PS_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
#ifdef BG_FT_SUPPORT
BG_FTPH_Init();
#endif /* BG_FT_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
/*
To reduce connection time,
do auto reconnect here instead of waiting STAMlmePeriodicExec to do auto reconnect.
*/
if (pAd->OpMode == OPMODE_STA)
MlmeAutoReconnectLastSSID(pAd);
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
#ifdef WSC_INCLUDED
#ifdef CONFIG_AP_SUPPORT
if ((pAd->OpMode == OPMODE_AP)
#ifdef P2P_SUPPORT
/* P2P will use ApCfg.MBSSID and ApCfg.ApCliTab also. */
|| TRUE
#endif /* P2P_SUPPORT */
)
{
int index;
for (index = 0; index < pAd->ApCfg.BssidNum; index++)
{
#ifdef HOSTAPD_SUPPORT
if (pAd->ApCfg.MBSSID[index].Hostapd == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("WPS is control by hostapd now.\n"));
}
else
#endif /*HOSTAPD_SUPPORT*/
{
PWSC_CTRL pWscControl;
UCHAR zeros16[16]= {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
pWscControl = &pAd->ApCfg.MBSSID[index].WscControl;
DBGPRINT(RT_DEBUG_TRACE, ("Generate UUID for apidx(%d)\n", index));
if (NdisEqualMemory(&pWscControl->Wsc_Uuid_E[0], zeros16, UUID_LEN_HEX))
WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], index, FALSE);
WscInit(pAd, FALSE, index);
}
}
#ifdef APCLI_SUPPORT
for(index = 0; index < MAX_APCLI_NUM; index++)
{
PWSC_CTRL pWpsCtrl = &pAd->ApCfg.ApCliTab[index].WscControl;
pWpsCtrl->pAd = pAd;
NdisZeroMemory(pWpsCtrl->EntryAddr, MAC_ADDR_LEN);
pWpsCtrl->WscConfigMethods= 0x018C;
RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_WSC_INIT, 0, (VOID *)&pAd->ApCfg.ApCliTab[index], index);
}
#endif /* APCLI_SUPPORT */
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
PWSC_CTRL pWscControl = &pAd->StaCfg.WscControl;
WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], 0, FALSE);
WscInit(pAd, FALSE, BSS0);
#ifdef WSC_V2_SUPPORT
WscInitRegistrarPair(pAd, &pAd->StaCfg.WscControl, BSS0);
#endif /* WSC_V2_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
/* WSC hardware push button function 0811 */
WSC_HDR_BTN_Init(pAd);
#endif /* WSC_INCLUDED */
}
VOID RTMPDrvClose(
IN VOID *pAdSrc,
IN VOID *net_dev)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
BOOLEAN Cancelled;
UINT32 i = 0;
Cancelled = FALSE;
#ifdef CONFIG_STA_SUPPORT
#ifdef CREDENTIAL_STORE
if (pAd->IndicateMediaState == NdisMediaStateConnected)
{
StoreConnectInfo(pAd);
}
else
{
RTMP_SEM_LOCK(&pAd->StaCtIf.Lock);
pAd->StaCtIf.Changeable = FALSE;
RTMP_SEM_UNLOCK(&pAd->StaCtIf.Lock);
}
#endif /* CREDENTIAL_STORE */
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
#ifdef BG_FT_SUPPORT
BG_FTPH_Remove();
#endif /* BG_FT_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef PCIE_PS_SUPPORT
RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE);
#endif /* PCIE_PS_SUPPORT */
/* If dirver doesn't wake up firmware here,*/
/* NICLoadFirmware will hang forever when interface is up again.*/
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
{
AsicForceWakeup(pAd, TRUE);
}
#ifdef RTMP_MAC_USB
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
#endif /* RTMP_MAC_USB */
}
#endif /* CONFIG_STA_SUPPORT */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
#ifdef EXT_BUILD_CHANNEL_LIST
if (pAd->CommonCfg.pChDesp != NULL)
os_free_mem(NULL, pAd->CommonCfg.pChDesp);
pAd->CommonCfg.pChDesp = NULL;
pAd->CommonCfg.DfsType = MAX_RD_REGION;
pAd->CommonCfg.bCountryFlag = 0;
#endif /* EXT_BUILD_CHANNEL_LIST */
for (i = 0 ; i < NUM_OF_TX_RING; i++)
{
while (pAd->DeQueueRunning[i] == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("Waiting for TxQueue[%d] done..........\n", i));
RTMPusecDelay(1000);
}
}
#ifdef RTMP_MAC_USB
RtmpOsUsbEmptyUrbCheck(&pAd->wait, &pAd->BulkInLock, &pAd->PendingRx);
#endif /* RTMP_MAC_USB */
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
#ifdef RTMP_MAC_USB
RTMPCancelTimer(&pAd->CommonCfg.BeaconUpdateTimer, &Cancelled);
#endif /* RTMP_MAC_USB */
#ifdef DOT11N_DRAFT3
if (pAd->CommonCfg.Bss2040CoexistFlag & BSS_2040_COEXIST_TIMER_FIRED)
{
RTMPCancelTimer(&pAd->CommonCfg.Bss2040CoexistTimer, &Cancelled);
pAd->CommonCfg.Bss2040CoexistFlag = 0;
}
#endif /* DOT11N_DRAFT3 */
/* PeriodicTimer already been canceled by MlmeHalt() API.*/
/*RTMPCancelTimer(&pAd->PeriodicTimer, &Cancelled);*/
}
#endif /* CONFIG_AP_SUPPORT */
/* Stop Mlme state machine*/
MlmeHalt(pAd);
/* Close net tasklets*/
RtmpNetTaskExit(pAd);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
MacTableReset(pAd);
#ifdef MAT_SUPPORT
MATEngineExit(pAd);
#endif /* MAT_SUPPORT */
#if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT)
if (pAd->WOW_Cfg.bEnable == TRUE)
RT28xxUsbAsicWOWEnable(pAd);
else
#endif /* WOW_SUPPORT */
MlmeRadioOff(pAd);
}
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
#ifdef MAT_SUPPORT
MATEngineExit(pAd);
#endif /* MAT_SUPPORT */
#ifdef CLIENT_WDS
CliWds_ProxyTabDestory(pAd);
#endif /* CLIENT_WDS */
/* Shutdown Access Point function, release all related resources */
APShutdown(pAd);
/*#ifdef AUTO_CH_SELECT_ENHANCE*/
/* Free BssTab & ChannelInfo tabbles.*/
/* AutoChBssTableDestroy(pAd); */
/* ChannelInfoDestroy(pAd); */
/*#endif AUTO_CH_SELECT_ENHANCE */
}
#endif /* CONFIG_AP_SUPPORT */
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
#ifdef LED_CONTROL_SUPPORT
RTMPExitLEDMode(pAd);
#endif // LED_CONTROL_SUPPORT
/* Close kernel threads*/
RtmpMgmtTaskExit(pAd);
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
/* must after RtmpMgmtTaskExit(); Or pAd->pChannelInfo will be NULL */
/* Free BssTab & ChannelInfo tabbles.*/
AutoChBssTableDestroy(pAd);
ChannelInfoDestroy(pAd);
}
#endif /* CONFIG_AP_SUPPORT */
/* Free IRQ*/
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
/* Free Ring or USB buffers*/
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
/* Free Ring or USB buffers*/
RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
#ifdef DOT11_N_SUPPORT
/* Free BA reorder resource*/
ba_reordering_resource_release(pAd);
#endif /* DOT11_N_SUPPORT */
UserCfgExit(pAd); /* must after ba_reordering_resource_release */
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
/*+++Modify by woody to solve the bulk fail+++*/
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef RT35xx
if (IS_RT3572(pAd))
{
RT30xxWriteRFRegister(pAd, RF_R08, 0x00);
AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02, FALSE);
}
#endif /* RT35xx */
#ifdef DOT11Z_TDLS_SUPPORT
TDLS_Table_Destory(pAd);
#ifdef TDLS_AUTOLINK_SUPPORT
TDLS_ClearEntryList(&pAd->StaCfg.TdlsInfo.TdlsDiscovPeerList);
NdisFreeSpinLock(&pAd->StaCfg.TdlsInfo.TdlsDiscovPeerListSemLock);
TDLS_ClearEntryList(&pAd->StaCfg.TdlsInfo.TdlsBlackList);
NdisFreeSpinLock(&pAd->StaCfg.TdlsInfo.TdlsBlackListSemLock);
#endif /* TDLS_AUTOLINK_SUPPORT */
#endif /* DOT11Z_TDLS_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
/* clear MAC table */
/* TODO: do not clear spin lock, such as fLastChangeAccordingMfbLock */
NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));
/* release all timers */
RTMPusecDelay(2000);
RTMP_TimerListRelease(pAd);
#ifdef RTMP_TIMER_TASK_SUPPORT
NdisFreeSpinLock(&pAd->TimerQLock);
#endif /* RTMP_TIMER_TASK_SUPPORT */
}
VOID RTMPInfClose(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
#ifdef CONFIG_AP_SUPPORT
pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = FALSE;
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
/* kick out all STAs behind the bss.*/
MbssKickOutStas(pAd, MAIN_MBSSID, REASON_DISASSOC_INACTIVE);
}
#ifdef RT_CFG80211_SUPPORT
#else
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif /* RT_CFG80211_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef PROFILE_STORE
WriteDatThread(pAd);
RTMPusecDelay(1000);
#endif /* PROFILE_STORE */
#ifdef QOS_DLS_SUPPORT
/* send DLS-TEAR_DOWN message, */
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
/* tear down local dls table entry*/
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
/* tear down peer dls table entry*/
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif /* QOS_DLS_SUPPORT */
if (INFRA_ON(pAd) &&
#if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT) /* In WOW state, can't issue disassociation reqeust */
pAd->WOW_Cfg.bEnable == FALSE &&
#endif /* WOW_SUPPORT */
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
/* kfree(MsgElem);*/
os_free_mem(NULL, MsgElem);
}
RTMPusecDelay(1000);
}
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
/* send wireless event to wpa_supplicant for infroming interface down.*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
if (pAd->StaCfg.pWpsProbeReqIe)
{
/* kfree(pAd->StaCfg.pWpsProbeReqIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpsProbeReqIe);
pAd->StaCfg.pWpsProbeReqIe = NULL;
pAd->StaCfg.WpsProbeReqIeLen = 0;
}
if (pAd->StaCfg.pWpaAssocIe)
{
/* kfree(pAd->StaCfg.pWpaAssocIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpaAssocIe);
pAd->StaCfg.pWpaAssocIe = NULL;
pAd->StaCfg.WpaAssocIeLen = 0;
}
#endif /* WPA_SUPPLICANT_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
}
PNET_DEV RtmpPhyNetDevMainCreate(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
PNET_DEV pDevNew;
UINT32 MC_RowID = 0, IoctlIF = 0;
pAd = pAd;
#ifdef MULTIPLE_CARD_SUPPORT
MC_RowID = pAd->MC_RowID;
#endif /* MULTIPLE_CARD_SUPPORT */
#ifdef HOSTAPD_SUPPORT
IoctlIF = pAd->IoctlIF;
#endif /* HOSTAPD_SUPPORT */
pDevNew = RtmpOSNetDevCreate((INT32)MC_RowID, (UINT32 *)&IoctlIF,
INT_MAIN, 0, sizeof(PRTMP_ADAPTER), INF_MAIN_DEV_NAME);
#ifdef HOSTAPD_SUPPORT
pAd->IoctlIF = IoctlIF;
#endif /* HOSTAPD_SUPPORT */
return pDevNew;
}
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_close(IN struct net_device *net_dev)
{
RTMP_ADAPTER *pAd = NULL;
GET_PAD_FROM_NET_DEV(pAd, net_dev);
// Sanity check for pAd
if (pAd == NULL)
return 0; // close ok
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
#ifdef CONFIG_AP_SUPPORT
pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = FALSE;
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
// kick out all STAs behind the bss.
MbssKickOutStas(pAd, MAIN_MBSSID, REASON_DISASSOC_INACTIVE);
}
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif // CONFIG_AP_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef QOS_DLS_SUPPORT
// send DLS-TEAR_DOWN message,
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
// tear down local dls table entry
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
// tear down peer dls table entry
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif // QOS_DLS_SUPPORT //
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
// Prevent to connect AP again in STAMlmePeriodicExec
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
}
RTMPusecDelay(1000);
}
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
// send wireless event to wpa_supplicant for infroming interface down.
RtmpOSWirelessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
if (pAd->StaCfg.pWpsProbeReqIe)
{
kfree(pAd->StaCfg.pWpsProbeReqIe);
pAd->StaCfg.pWpsProbeReqIe = NULL;
pAd->StaCfg.WpsProbeReqIeLen = 0;
}
if (pAd->StaCfg.pWpaAssocIe)
{
kfree(pAd->StaCfg.pWpaAssocIe);
pAd->StaCfg.pWpaAssocIe = NULL;
pAd->StaCfg.WpaAssocIeLen = 0;
}
#endif // WPA_SUPPLICANT_SUPPORT //
}
#endif // CONFIG_STA_SUPPORT //
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0; // close ok
}
INT RTMP_COM_IoctlHandle(
IN VOID *pAdSrc,
IN RTMP_IOCTL_INPUT_STRUCT *wrq,
IN INT cmd,
IN USHORT subcmd,
IN VOID *pData,
IN ULONG Data)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
INT Status = NDIS_STATUS_SUCCESS, i;
pObj = pObj; /* avoid compile warning */
switch(cmd)
{
case CMD_RTPRIV_IOCTL_NETDEV_GET:
/* get main net_dev */
{
VOID **ppNetDev = (VOID **)pData;
*ppNetDev = (VOID *)(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_NETDEV_SET:
{
struct wifi_dev *wdev = NULL;
/* set main net_dev */
pAd->net_dev = pData;
#ifdef CONFIG_AP_SUPPORT
if (pAd->OpMode == OPMODE_AP) {
pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev.if_dev = (void *)pData;
pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev.func_dev = (void *)&pAd->ApCfg.MBSSID[MAIN_MBSSID];
pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev.sys_handle = (void *)pAd;
RTMP_OS_NETDEV_SET_WDEV(pData, &pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev);
wdev = &pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev;
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA) {
pAd->StaCfg.wdev.if_dev = pData;
pAd->StaCfg.wdev.func_dev = (void *)&pAd->StaCfg;
pAd->StaCfg.wdev.sys_handle = (void *)pAd;
RTMP_OS_NETDEV_SET_WDEV(pData, &pAd->StaCfg.wdev);
wdev = &pAd->StaCfg.wdev;
}
#endif /* CONFIG_STA_SUPPORT */
if (wdev) {
if (rtmp_wdev_idx_reg(pAd, wdev) < 0) {
DBGPRINT(RT_DEBUG_ERROR, ("Assign wdev idx for %s failed, free net device!\n",
RTMP_OS_NETDEV_GET_DEVNAME(pAd->net_dev)));
RtmpOSNetDevFree(pAd->net_dev);
}
}
break;
}
case CMD_RTPRIV_IOCTL_OPMODE_GET:
/* get Operation Mode */
*(ULONG *)pData = pAd->OpMode;
break;
case CMD_RTPRIV_IOCTL_TASK_LIST_GET:
/* get all Tasks */
{
RT_CMD_WAIT_QUEUE_LIST *pList = (RT_CMD_WAIT_QUEUE_LIST *)pData;
pList->pMlmeTask = &pAd->mlmeTask;
#ifdef RTMP_TIMER_TASK_SUPPORT
pList->pTimerTask = &pAd->timerTask;
#endif /* RTMP_TIMER_TASK_SUPPORT */
pList->pCmdQTask = &pAd->cmdQTask;
}
break;
case CMD_RTPRIV_IOCTL_IRQ_RELEASE:
/* release IRQ */
RTMP_OS_IRQ_RELEASE(pAd, pAd->net_dev);
break;
case CMD_RTPRIV_IOCTL_NIC_NOT_EXIST:
/* set driver state to fRTMP_ADAPTER_NIC_NOT_EXIST */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
break;
case CMD_RTPRIV_IOCTL_MCU_SLEEP_CLEAR:
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_MCU_SLEEP);
break;
#ifdef CONFIG_STA_SUPPORT
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
case CMD_RTPRIV_IOCTL_USB_DEV_GET:
/* get USB DEV */
{
VOID **ppUsb_Dev = (VOID **)pData;
*ppUsb_Dev = (VOID *)(pObj->pUsb_Dev);
}
break;
case CMD_RTPRIV_IOCTL_USB_INTF_GET:
/* get USB INTF */
{
VOID **ppINTF = (VOID **)pData;
*ppINTF = (VOID *)(pObj->intf);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_SET:
/* set driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_SET_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_CLEAR:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_CLEAR_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD);
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_MCU_SLEEP);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SEND_DISSASSOCIATE:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
os_free_mem(NULL, MsgElem);
}
/* RtmpusecDelay(1000);*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CGIWAP, -1, NULL, NULL, 0);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_TEST:
/* test driver state to fRTMP_ADAPTER_SUSPEND */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_IDLE_RADIO_OFF_TEST:
/* test driver state to fRTMP_ADAPTER_IDLE_RADIO_OFF */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_IDLE_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_OFF:
ASIC_RADIO_OFF(pAd, SUSPEND_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_ON:
ASIC_RADIO_ON(pAd, RESUME_RADIO_ON);
break;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#if (defined(WOW_SUPPORT) && defined(RTMP_MAC_USB)) || defined(NEW_WOW_SUPPORT)
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_WOW_STATUS:
*(UCHAR *)pData = (UCHAR)pAd->WOW_Cfg.bEnable;
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_WOW_ENABLE:
ASIC_WOW_ENABLE(pAd);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_WOW_DISABLE:
ASIC_WOW_DISABLE(pAd);
break;
#endif /* (defined(WOW_SUPPORT) && defined(RTMP_MAC_USB)) || defined(NEW_WOW_SUPPORT) */
#endif /* CONFIG_PM */
case CMD_RTPRIV_IOCTL_AP_BSSID_GET:
if (pAd->StaCfg.wdev.PortSecured == WPA_802_1X_PORT_NOT_SECURED)
NdisCopyMemory(pData, pAd->MlmeAux.Bssid, 6);
else
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_SET:
/* set driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_SET_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_CLEAR:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_CLEAR_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_OFF:
/* RT28xxUsbAsicRadioOff */
//RT28xxUsbAsicRadioOff(pAd);
ASIC_RADIO_OFF(pAd, SUSPEND_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_ON:
/* RT28xxUsbAsicRadioOn */
//RT28xxUsbAsicRadioOn(pAd);
ASIC_RADIO_ON(pAd, RESUME_RADIO_ON);
break;
#endif /* CONFIG_STA_SUPPORT */
case CMD_RTPRIV_IOCTL_SANITY_CHECK:
/* sanity check before IOCTL */
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
#ifdef IFUP_IN_PROBE
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
#endif /* IFUP_IN_PROBE */
)
{
if(pData == NULL || RT_isLegalCmdBeforeInfUp((PSTRING) pData) == FALSE)
return NDIS_STATUS_FAILURE;
}
break;
case CMD_RTPRIV_IOCTL_SIOCGIWFREQ:
/* get channel number */
*(ULONG *)pData = pAd->CommonCfg.Channel;
break;
case CMD_RTPRIV_IOCTL_BEACON_UPDATE:
/* update all beacon contents */
#ifdef CONFIG_AP_SUPPORT
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif /* CONFIG_AP_SUPPORT */
break;
case CMD_RTPRIV_IOCTL_RXPATH_GET:
/* get the number of rx path */
*(ULONG *)pData = pAd->Antenna.field.RxPath;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_NUM_GET:
*(ULONG *)pData = pAd->ChannelListNum;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_GET:
{
UINT32 i;
UCHAR *pChannel = (UCHAR *)pData;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
*pChannel = pAd->ChannelList[i-1].Channel;
pChannel ++;
}
}
break;
case CMD_RTPRIV_IOCTL_FREQ_LIST_GET:
{
UINT32 i;
UINT32 *pFreq = (UINT32 *)pData;
UINT32 m;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
m = 2412000;
MAP_CHANNEL_ID_TO_KHZ(pAd->ChannelList[i-1].Channel, m);
(*pFreq) = m;
pFreq ++;
}
}
break;
#ifdef EXT_BUILD_CHANNEL_LIST
case CMD_RTPRIV_SET_PRECONFIG_VALUE:
/* Set some preconfigured value before interface up*/
pAd->CommonCfg.DfsType = MAX_RD_REGION;
break;
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef RTMP_USB_SUPPORT
case CMD_RTPRIV_IOCTL_USB_MORE_FLAG_SET:
{
RT_CMD_USB_MORE_FLAG_CONFIG *pConfig;
UINT32 VendorID, ProductID;
pConfig = (RT_CMD_USB_MORE_FLAG_CONFIG *)pData;
VendorID = pConfig->VendorID;
ProductID = pConfig->ProductID;
if (VendorID == 0x0DB0)
{
if ((ProductID == 0x871C) || (ProductID == 0x822C))
{
RTMP_SET_MORE_FLAG(pAd, (fRTMP_ADAPTER_DISABLE_DOT_11N | fRTMP_ADAPTER_WSC_PBC_PIN0));
}
if ((ProductID == 0x871A) || (ProductID == 0x822A))
{
RTMP_SET_MORE_FLAG(pAd, fRTMP_ADAPTER_DISABLE_DOT_11N);
}
if ((ProductID == 0x871B) || (ProductID == 0x822B))
{
RTMP_SET_MORE_FLAG(pAd, fRTMP_ADAPTER_WSC_PBC_PIN0);
}
}
if (VendorID == 0x07D1)
{
if (ProductID == 0x3C0F)
RTMP_SET_MORE_FLAG(pAd, fRTMP_ADAPTER_DISABLE_DOT_11N);
}
}
break;
case CMD_RTPRIV_IOCTL_USB_CONFIG_INIT:
{
RT_CMD_USB_DEV_CONFIG *pConfig;
UINT32 i;
pConfig = (RT_CMD_USB_DEV_CONFIG *)pData;
pAd->NumberOfPipes = pConfig->NumberOfPipes;
pAd->BulkInMaxPacketSize = pConfig->BulkInMaxPacketSize;
pAd->BulkOutMaxPacketSize = pConfig->BulkOutMaxPacketSize;
for (i = 0; i < 6; i++)
pAd->BulkOutEpAddr[i] = pConfig->BulkOutEpAddr[i];
for (i = 0; i < 2; i++)
pAd->BulkInEpAddr[i] = pConfig->BulkInEpAddr[i];
pAd->config = pConfig->pConfig;
}
break;
case CMD_RTPRIV_IOCTL_USB_SUSPEND:
pAd->PM_FlgSuspend = 1;
if (Data)
{
RTUSBCancelPendingBulkInIRP(pAd);
RTUSBCancelPendingBulkOutIRP(pAd);
}
break;
case CMD_RTPRIV_IOCTL_USB_RESUME:
pAd->PM_FlgSuspend = 0;
break;
case CMD_RTPRIV_IOCTL_USB_INIT:
InitUSBDevice(pData, pAd);
break;
#endif /* RTMP_USB_SUPPORT */
#ifdef RT_CFG80211_SUPPORT
case CMD_RTPRIV_IOCTL_CFG80211_CFG_START:
RT_CFG80211_REINIT(pAd);
RT_CFG80211_CRDA_REG_RULE_APPLY(pAd);
break;
#endif /* RT_CFG80211_SUPPORT */
#ifdef INF_PPA_SUPPORT
case CMD_RTPRIV_IOCTL_INF_PPA_INIT:
os_alloc_mem(NULL, (UCHAR **)&(pAd->pDirectpathCb), sizeof(PPA_DIRECTPATH_CB));
break;
case CMD_RTPRIV_IOCTL_INF_PPA_EXIT:
if (ppa_hook_directpath_register_dev_fn && (pAd->PPAEnable == TRUE))
{
UINT status;
status = ppa_hook_directpath_register_dev_fn(&pAd->g_if_id, pAd->net_dev, NULL, 0);
DBGPRINT(RT_DEBUG_TRACE, ("Unregister PPA::status=%d, if_id=%d\n", status, pAd->g_if_id));
}
os_free_mem(NULL, pAd->pDirectpathCb);
break;
#endif /* INF_PPA_SUPPORT*/
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP:
/* interface up */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
if (VIRTUAL_IF_NUM(pAd) == 0)
{
if (pInfConf->rt28xx_open(pAd->net_dev) != 0)
{
DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_open return fail!\n"));
return NDIS_STATUS_FAILURE;
}
}
else
{
#ifdef CONFIG_AP_SUPPORT
extern VOID APMakeAllBssBeacon(IN PRTMP_ADAPTER pAd);
extern VOID APUpdateAllBeaconFrame(IN PRTMP_ADAPTER pAd);
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif /* CONFIG_AP_SUPPORT */
}
VIRTUAL_IF_INC(pAd);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN:
/* interface down */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
VIRTUAL_IF_DEC(pAd);
if (VIRTUAL_IF_NUM(pAd) == 0)
pInfConf->rt28xx_close(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_GET:
/* get virtual interface number */
*(ULONG *)pData = VIRTUAL_IF_NUM(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_TYPE_GET:
/* get current interface type */
*(ULONG *)pData = pAd->infType;
break;
case CMD_RTPRIV_IOCTL_INF_STATS_GET:
/* get statistics */
{
RT_CMD_STATS *pStats = (RT_CMD_STATS *)pData;
pStats->pStats = pAd->stats;
if(pAd->OpMode == OPMODE_STA)
{
pStats->rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
pStats->tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
pStats->rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
pStats->tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
pStats->rx_errors = pAd->Counters8023.RxErrors;
pStats->tx_errors = pAd->Counters8023.TxErrors;
pStats->multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; /* multicast packets received*/
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = pAd->Counters8023.RxNoBuffer; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/*pAd->WlanCounters.FCSErrorCount; recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = pAd->Counters8023.RxNoBuffer; /* recv'r fifo overrun*/
}
#ifdef CONFIG_AP_SUPPORT
else if(pAd->OpMode == OPMODE_AP)
{
INT index;
for(index = 0; index < MAX_MBSSID_NUM(pAd); index++)
{
if (pAd->ApCfg.MBSSID[index].wdev.if_dev == (PNET_DEV)(pStats->pNetDev))
{
break;
}
}
if(index >= MAX_MBSSID_NUM(pAd))
{
//reset counters
pStats->rx_packets = 0;
pStats->tx_packets = 0;
pStats->rx_bytes = 0;
pStats->tx_bytes = 0;
pStats->rx_errors = 0;
pStats->tx_errors = 0;
pStats->multicast = 0; /* multicast packets received*/
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = 0; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0; /* recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = 0; /* recv'r fifo overrun*/
DBGPRINT(RT_DEBUG_ERROR, ("CMD_RTPRIV_IOCTL_INF_STATS_GET: can not find mbss I/F\n"));
return NDIS_STATUS_FAILURE;
}
pStats->rx_packets = pAd->ApCfg.MBSSID[index].RxCount;
pStats->tx_packets = pAd->ApCfg.MBSSID[index].TxCount;
pStats->rx_bytes = pAd->ApCfg.MBSSID[index].ReceivedByteCount;
pStats->tx_bytes = pAd->ApCfg.MBSSID[index].TransmittedByteCount;
pStats->rx_errors = pAd->ApCfg.MBSSID[index].RxErrorCount;
pStats->tx_errors = pAd->ApCfg.MBSSID[index].TxErrorCount;
pStats->multicast = pAd->ApCfg.MBSSID[index].mcPktsRx; /* multicast packets received */
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = 0; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/* recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = 0; /* recv'r fifo overrun*/
}
#endif
}
break;
case CMD_RTPRIV_IOCTL_INF_IW_STATUS_GET:
/* get wireless statistics */
{
UCHAR CurOpMode = OPMODE_AP;
#ifdef CONFIG_AP_SUPPORT
PMAC_TABLE_ENTRY pMacEntry = NULL;
#endif /* CONFIG_AP_SUPPORT */
RT_CMD_IW_STATS *pStats = (RT_CMD_IW_STATS *)pData;
pStats->qual = 0;
pStats->level = 0;
pStats->noise = 0;
pStats->pStats = pAd->iw_stats;
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA)
{
CurOpMode = OPMODE_STA;
}
#endif /* CONFIG_STA_SUPPORT */
/*check if the interface is down*/
if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
return NDIS_STATUS_FAILURE;
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
#ifdef APCLI_SUPPORT
if ((pStats->priv_flags == INT_APCLI)
)
{
INT ApCliIdx = ApCliIfLookUp(pAd, (PUCHAR)pStats->dev_addr);
if ((ApCliIdx >= 0) && VALID_WCID(pAd->ApCfg.ApCliTab[ApCliIdx].MacTabWCID))
pMacEntry = &pAd->MacTab.Content[pAd->ApCfg.ApCliTab[ApCliIdx].MacTabWCID];
}
else
#endif /* APCLI_SUPPORT */
{
/*
only AP client support wireless stats function.
return NULL pointer for all other cases.
*/
pMacEntry = NULL;
}
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
pStats->qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
if (pMacEntry != NULL)
pStats->qual = ((pMacEntry->ChannelQuality * 12)/10 + 10);
else
pStats->qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
}
#endif /* CONFIG_AP_SUPPORT */
if (pStats->qual > 100)
pStats->qual = 100;
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
{
pStats->level =
RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2);
}
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
if (pMacEntry != NULL)
pStats->level =
RTMPMaxRssi(pAd, pMacEntry->RssiSample.AvgRssi0,
pMacEntry->RssiSample.AvgRssi1,
pMacEntry->RssiSample.AvgRssi2);
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
pStats->noise = RTMPMaxRssi(pAd, pAd->ApCfg.RssiSample.AvgRssi0,
pAd->ApCfg.RssiSample.AvgRssi1,
pAd->ApCfg.RssiSample.AvgRssi2) -
RTMPMinSnr(pAd, pAd->ApCfg.RssiSample.AvgSnr0,
pAd->ApCfg.RssiSample.AvgSnr1);
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
pStats->noise = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2) -
RTMPMinSnr(pAd, pAd->StaCfg.RssiSample.AvgSnr0,
pAd->StaCfg.RssiSample.AvgSnr1);
#endif /* CONFIG_STA_SUPPORT */
}
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CREATE:
*(VOID **)pData = RtmpPhyNetDevMainCreate(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_ID_GET:
*(ULONG *)pData = INT_MAIN;
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CHECK:
if (Data != INT_MAIN)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_INF_P2P_CHECK:
if (Data != INT_P2P)
return NDIS_STATUS_FAILURE;
break;
#ifdef RALINK_ATE
#endif /* RALINK_ATE */
case CMD_RTPRIV_IOCTL_MAC_ADDR_GET:
{
UCHAR mac_addr[MAC_ADDR_LEN];
USHORT Addr01, Addr23, Addr45;
RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
mac_addr[0] = (UCHAR)(Addr01 & 0xff);
mac_addr[1] = (UCHAR)(Addr01 >> 8);
mac_addr[2] = (UCHAR)(Addr23 & 0xff);
mac_addr[3] = (UCHAR)(Addr23 >> 8);
mac_addr[4] = (UCHAR)(Addr45 & 0xff);
mac_addr[5] = (UCHAR)(Addr45 >> 8);
for(i=0; i<6; i++)
*(UCHAR *)(pData+i) = mac_addr[i];
break;
}
#ifdef CONFIG_AP_SUPPORT
case CMD_RTPRIV_IOCTL_AP_SIOCGIWRATEQ:
/* handle for SIOCGIWRATEQ */
{
RT_CMD_IOCTL_RATE *pRate = (RT_CMD_IOCTL_RATE *)pData;
HTTRANSMIT_SETTING HtPhyMode;
UINT8 BW = 0, GI = 0, MCS = 0;
#ifdef APCLI_SUPPORT
if (pRate->priv_flags == INT_APCLI)
memcpy(&HtPhyMode, &pAd->ApCfg.ApCliTab[pObj->ioctl_if].wdev.HTPhyMode, sizeof(HTTRANSMIT_SETTING));
else
#endif /* APCLI_SUPPORT */
{
memcpy(&HtPhyMode, &pAd->ApCfg.MBSSID[pObj->ioctl_if].wdev.HTPhyMode, sizeof(HTTRANSMIT_SETTING));
#ifdef MBSS_SUPPORT
/* reset phy mode for MBSS */
MBSS_PHY_MODE_RESET(pObj->ioctl_if, HtPhyMode);
#endif /* MBSS_SUPPORT */
}
#ifdef DOT11_VHT_AC
if (HtPhyMode.field.BW == BW_40 && pAd->CommonCfg.vht_bw == VHT_BW_80 && HtPhyMode.field.MODE >= MODE_VHT) {
BW = 2;
GI = pAd->CommonCfg.vht_sgi_80;
}
else
#endif /* DOT11_VHT_AC */
{
BW = HtPhyMode.field.BW;
GI = HtPhyMode.field.ShortGI;
}
RtmpDrvRateGet(pAd, HtPhyMode.field.MODE, GI,
BW, HtPhyMode.field.MCS,
pAd->Antenna.field.TxPath,
(UINT32 *)&pRate->BitRate);
}
break;
#endif /* CONFIG_AP_SUPPORT */
case CMD_RTPRIV_IOCTL_SIOCGIWNAME:
RtmpIoctl_rt_ioctl_giwname(pAd, pData, 0);
break;
}
#ifdef RT_CFG80211_SUPPORT
if ((CMD_RTPRIV_IOCTL_80211_START <= cmd) &&
(cmd <= CMD_RTPRIV_IOCTL_80211_END))
{
Status = CFG80211DRV_IoctlHandle(pAd, wrq, cmd, subcmd, pData, Data);
}
#endif /* RT_CFG80211_SUPPORT */
if (cmd >= CMD_RTPRIV_IOCTL_80211_COM_LATEST_ONE)
return NDIS_STATUS_FAILURE;
return Status;
}
static int usb_rtusb_close(struct net_device *net_dev)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) RTMP_OS_NETDEV_GET_PRIV(net_dev);
int i = 0;
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM MsgElem;
wait_queue_head_t wait;
// if (!pAd->ProbeFinish)
// return -1;
init_waitqueue_head(&wait);
DBGPRINT(RT_DEBUG_TRACE, "%s-->\n", __FUNCTION__);
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
if (INFRA_ON(pAd))
{
COPY_MAC_ADDR(DisReq.Addr, pAd->PortCfg.Bssid);
DisReq.Reason = REASON_DISASSOC_STA_LEAVING;
MsgElem.Machine = ASSOC_STATE_MACHINE;
MsgElem.MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem.MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem.Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
MlmeDisassocReqAction(pAd, &MsgElem);
wait_event_interruptible_timeout(wait,0,HZ/1000);
}
VIRTUAL_IF_DEC(pAd);
if (VIRTUAL_IF_NUM(pAd) == 0)
{
for(i=0;i<10 || pAd->CmdHandlerIsRunning==TRUE;i++)
wait_event_interruptible_timeout(wait,0,HZ/1000);
for(i=0;i<10 || pAd->Mlme.bRunning==TRUE;i++)
wait_event_interruptible_timeout(wait,0,HZ/1000);
//
// Patch to fully turn off BBP, need to send a fake NULL frame.
//
RTUSBWriteMACRegister(pAd, MAC_CSR10, 0x0018);
for (i=0; i<10; i++)
{
RTMPSendNullFrame(pAd, RATE_6);
RTMPusecDelay(1000);
}
AsicDisableSync(pAd);
RTMPSetLED(pAd, LED_HALT);
atomic_set(&pAd->PendingRx, 0);
}
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
{
// TODO: Shall we send wireless event to notfiy user space that if-down??
}
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
module_put(THIS_MODULE);
#else
MOD_DEC_USE_COUNT;
#endif
DBGPRINT(RT_DEBUG_TRACE, "%s<--\n", __FUNCTION__);
return 0;
}
INT RTMP_COM_IoctlHandle(
IN VOID *pAdSrc,
IN RTMP_IOCTL_INPUT_STRUCT *wrq,
IN INT cmd,
IN USHORT subcmd,
IN VOID *pData,
IN ULONG Data)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
INT Status = NDIS_STATUS_SUCCESS, i;
UCHAR PermanentAddress[MAC_ADDR_LEN];
USHORT Addr01, Addr23, Addr45;
pObj = pObj; /* avoid compile warning */
switch(cmd)
{
case CMD_RTPRIV_IOCTL_NETDEV_GET:
/* get main net_dev */
{
VOID **ppNetDev = (VOID **)pData;
*ppNetDev = (VOID *)(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_NETDEV_SET:
/* set main net_dev */
pAd->net_dev = pData;
break;
case CMD_RTPRIV_IOCTL_OPMODE_GET:
/* get Operation Mode */
*(ULONG *)pData = pAd->OpMode;
break;
case CMD_RTPRIV_IOCTL_TASK_LIST_GET:
/* get all Tasks */
{
RT_CMD_WAIT_QUEUE_LIST *pList = (RT_CMD_WAIT_QUEUE_LIST *)pData;
pList->pMlmeTask = &pAd->mlmeTask;
#ifdef RTMP_TIMER_TASK_SUPPORT
pList->pTimerTask = &pAd->timerTask;
#endif /* RTMP_TIMER_TASK_SUPPORT */
pList->pCmdQTask = &pAd->cmdQTask;
}
break;
case CMD_RTPRIV_IOCTL_IRQ_INIT:
/* init IRQ */
RTMP_IRQ_INIT(pAd);
break;
case CMD_RTPRIV_IOCTL_IRQ_RELEASE:
/* release IRQ */
RTMP_OS_IRQ_RELEASE(pAd, pAd->net_dev);
break;
#ifdef RTMP_MAC_PCI
case CMD_RTPRIV_IOCTL_MSI_ENABLE:
/* enable MSI */
RTMP_MSI_ENABLE(pAd);
*(ULONG **)pData = (ULONG *)(pObj->pci_dev);
break;
#endif /* RTMP_MAC_PCI */
case CMD_RTPRIV_IOCTL_NIC_NOT_EXIST:
/* set driver state to fRTMP_ADAPTER_NIC_NOT_EXIST */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
break;
#ifdef CONFIG_APSTA_MIXED_SUPPORT
case CMD_RTPRIV_IOCTL_MAX_IN_BIT:
/* set MAX_IN_BIT for WMM */
CW_MAX_IN_BITS = Data;
break;
#endif /* CONFIG_APSTA_MIXED_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
case CMD_RTPRIV_IOCTL_USB_DEV_GET:
/* get USB DEV */
{
VOID **ppUsb_Dev = (VOID **)pData;
*ppUsb_Dev = (VOID *)(pObj->pUsb_Dev);
}
break;
case CMD_RTPRIV_IOCTL_USB_INTF_GET:
/* get USB INTF */
{
VOID **ppINTF = (VOID **)pData;
*ppINTF = (VOID *)(pObj->intf);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_SET:
/* set driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_SET_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_CLEAR:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_CLEAR_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SEND_DISSASSOCIATE:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);/* kfree(MsgElem);*/
os_free_mem(NULL, MsgElem);
}
/* RTMPusecDelay(1000);*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CGIWAP, -1, NULL, NULL, 0);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_TEST:
/* test driver state to fRTMP_ADAPTER_SUSPEND */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_IDLE_RADIO_OFF_TEST:
/* test driver state to fRTMP_ADAPTER_IDLE_RADIO_OFF */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_IDLE_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_OFF:
/* RT28xxUsbAsicRadioOff */
RT28xxUsbAsicRadioOff(pAd);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_ON:
/* RT28xxUsbAsicRadioOn */
RT28xxUsbAsicRadioOn(pAd);
break;
#ifdef WOW_SUPPORT
#endif /* WOW_SUPPORT */
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */
case CMD_RTPRIV_IOCTL_AP_BSSID_GET:
if (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)
NdisCopyMemory(pData, pAd->MlmeAux.Bssid, 6);
else
return NDIS_STATUS_FAILURE;
break;
#endif /* CONFIG_STA_SUPPORT */
case CMD_RTPRIV_IOCTL_SANITY_CHECK:
/* sanity check before IOCTL */
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
#ifdef IFUP_IN_PROBE
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
#endif /* IFUP_IN_PROBE */
)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_SIOCGIWFREQ:
/* get channel number */
*(ULONG *)pData = pAd->CommonCfg.Channel;
break;
case CMD_RTPRIV_IOCTL_BEACON_UPDATE:
/* update all beacon contents */
break;
case CMD_RTPRIV_IOCTL_RXPATH_GET:
/* get the number of rx path */
*(ULONG *)pData = pAd->Antenna.field.RxPath;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_NUM_GET:
*(ULONG *)pData = pAd->ChannelListNum;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_GET:
{
UINT32 i;
UCHAR *pChannel = (UCHAR *)pData;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
*pChannel = pAd->ChannelList[i-1].Channel;
pChannel ++;
}
}
break;
case CMD_RTPRIV_IOCTL_FREQ_LIST_GET:
{
UINT32 i;
UINT32 *pFreq = (UINT32 *)pData;
UINT32 m;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
m = 2412000;
MAP_CHANNEL_ID_TO_KHZ(pAd->ChannelList[i-1].Channel, m);
(*pFreq) = m;
pFreq ++;
}
}
break;
#ifdef RTMP_PCI_SUPPORT
case CMD_RTPRIV_IOCTL_PCI_SUSPEND:
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_PCI_RESUME:
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_PCI_CSR_SET:
pAd->CSRBaseAddress = (PUCHAR)Data;
DBGPRINT(RT_DEBUG_ERROR, ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n", (ULONG)pAd->CSRBaseAddress, (ULONG)Data));
break;
case CMD_RTPRIV_IOCTL_PCIE_INIT:
RTMPInitPCIeDevice(pData, pAd);
break;
#endif /* RTMP_PCI_SUPPORT */
#ifdef RT_CFG80211_SUPPORT
case CMD_RTPRIV_IOCTL_CFG80211_CFG_START:
RT_CFG80211_REINIT(pAd);
RT_CFG80211_CRDA_REG_RULE_APPLY(pAd);
break;
#endif /* RT_CFG80211_SUPPORT */
#ifdef INF_PPA_SUPPORT
case CMD_RTPRIV_IOCTL_INF_PPA_INIT:
os_alloc_mem(NULL, (UCHAR **)&(pAd->pDirectpathCb), sizeof(PPA_DIRECTPATH_CB));
break;
case CMD_RTPRIV_IOCTL_INF_PPA_EXIT:
if (ppa_hook_directpath_register_dev_fn && pAd->PPAEnable==TRUE)
{
UINT status;
status=ppa_hook_directpath_register_dev_fn(&pAd->g_if_id, pAd->net_dev, NULL, 0);
DBGPRINT(RT_DEBUG_TRACE, ("unregister PPA:g_if_id=%d status=%d\n",pAd->g_if_id,status));
}
os_free_mem(NULL, pAd->pDirectpathCb);
break;
#endif /* INF_PPA_SUPPORT*/
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP:
/* interface up */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
if (VIRTUAL_IF_NUM(pAd) == 0)
{
if (pInfConf->rt28xx_open(pAd->net_dev) != 0)
{
DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_open return fail!\n"));
return NDIS_STATUS_FAILURE;
}
}
else
{
}
VIRTUAL_IF_INC(pAd);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN:
/* interface down */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
VIRTUAL_IF_DEC(pAd);
if (VIRTUAL_IF_NUM(pAd) == 0)
pInfConf->rt28xx_close(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_GET:
/* get virtual interface number */
*(ULONG *)pData = VIRTUAL_IF_NUM(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_TYPE_GET:
/* get current interface type */
*(ULONG *)pData = pAd->infType;
break;
case CMD_RTPRIV_IOCTL_INF_STATS_GET:
/* get statistics */
{
RT_CMD_STATS *pStats = (RT_CMD_STATS *)pData;
pStats->pStats = pAd->stats;
pStats->rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
pStats->tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
pStats->rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
pStats->tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
pStats->rx_errors = pAd->Counters8023.RxErrors;
pStats->tx_errors = pAd->Counters8023.TxErrors;
pStats->multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; /* multicast packets received*/
pStats->collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions; /* Collision packets*/
pStats->rx_over_errors = pAd->Counters8023.RxNoBuffer; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/*pAd->WlanCounters.FCSErrorCount; recved pkt with crc error*/
pStats->rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = pAd->Counters8023.RxNoBuffer; /* recv'r fifo overrun*/
}
break;
case CMD_RTPRIV_IOCTL_INF_IW_STATUS_GET:
/* get wireless statistics */
{
UCHAR CurOpMode = OPMODE_AP;
RT_CMD_IW_STATS *pStats = (RT_CMD_IW_STATS *)pData;
pStats->qual = 0;
pStats->level = 0;
pStats->noise = 0;
pStats->pStats = pAd->iw_stats;
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA)
{
CurOpMode = OPMODE_STA;
}
#endif /* CONFIG_STA_SUPPORT */
/*check if the interface is down*/
if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
return NDIS_STATUS_FAILURE;
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
pStats->qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
#endif /* CONFIG_STA_SUPPORT */
if (pStats->qual > 100)
pStats->qual = 100;
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
{
pStats->level =
RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2);
}
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
pStats->noise = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2) -
RTMPMinSnr(pAd, pAd->StaCfg.RssiSample.AvgSnr0,
pAd->StaCfg.RssiSample.AvgSnr1);
#endif /* CONFIG_STA_SUPPORT */
}
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CREATE:
*(VOID **)pData = RtmpPhyNetDevMainCreate(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_ID_GET:
*(ULONG *)pData = INT_MAIN;
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CHECK:
if (Data != INT_MAIN)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_INF_P2P_CHECK:
if (Data != INT_P2P)
return NDIS_STATUS_FAILURE;
break;
#ifdef WDS_SUPPORT
case CMD_RTPRIV_IOCTL_WDS_INIT:
WDS_Init(pAd, pData);
break;
case CMD_RTPRIV_IOCTL_WDS_REMOVE:
WDS_Remove(pAd);
break;
case CMD_RTPRIV_IOCTL_WDS_STATS_GET:
if (Data == INT_WDS)
{
if (WDS_StatsGet(pAd, pData) != TRUE)
return NDIS_STATUS_FAILURE;
}
else
return NDIS_STATUS_FAILURE;
break;
#endif /* WDS_SUPPORT */
#ifdef RALINK_ATE
#ifdef RALINK_QA
case CMD_RTPRIV_IOCTL_ATE:
RtmpDoAte(pAd, wrq, pData);
break;
#endif /* RALINK_QA */
#endif /* RALINK_ATE */
case CMD_RTPRIV_IOCTL_MAC_ADDR_GET:
RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
PermanentAddress[0] = (UCHAR)(Addr01 & 0xff);
PermanentAddress[1] = (UCHAR)(Addr01 >> 8);
PermanentAddress[2] = (UCHAR)(Addr23 & 0xff);
PermanentAddress[3] = (UCHAR)(Addr23 >> 8);
PermanentAddress[4] = (UCHAR)(Addr45 & 0xff);
PermanentAddress[5] = (UCHAR)(Addr45 >> 8);
for(i=0; i<6; i++)
*(UCHAR *)(pData+i) = PermanentAddress[i];
break;
case CMD_RTPRIV_IOCTL_SIOCGIWNAME:
RtmpIoctl_rt_ioctl_giwname(pAd, pData, 0);
break;
}
#ifdef RT_CFG80211_SUPPORT
if ((CMD_RTPRIV_IOCTL_80211_START <= cmd) &&
(cmd <= CMD_RTPRIV_IOCTL_80211_END))
{
CFG80211DRV_IoctlHandle(pAd, wrq, cmd, subcmd, pData, Data);
}
#endif /* RT_CFG80211_SUPPORT */
if (cmd >= CMD_RTPRIV_IOCTL_80211_COM_LATEST_ONE)
return NDIS_STATUS_FAILURE;
return Status;
}
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int rt28xx_close(IN PNET_DEV dev)
{
struct net_device * net_dev = (struct net_device *)dev;
RTMP_ADAPTER *pAd = NULL;
BOOLEAN Cancelled;
UINT32 i = 0;
#ifdef RTMP_MAC_USB
DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
DECLARE_WAITQUEUE(wait, current);
//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
#endif // RTMP_MAC_USB //
GET_PAD_FROM_NET_DEV(pAd, net_dev);
DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
Cancelled = FALSE;
// Sanity check for pAd
if (pAd == NULL)
return 0; // close ok
#ifdef WDS_SUPPORT
WdsDown(pAd);
#endif // WDS_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// If dirver doesn't wake up firmware here,
// NICLoadFirmware will hang forever when interface is up again.
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
{
AsicForceWakeup(pAd, TRUE);
}
#ifdef QOS_DLS_SUPPORT
// send DLS-TEAR_DOWN message,
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
// tear down local dls table entry
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
// tear down peer dls table entry
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif // QOS_DLS_SUPPORT //
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
// Prevent to connect AP again in STAMlmePeriodicExec
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
}
RTMPusecDelay(1000);
}
#ifdef RTMP_MAC_USB
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
#endif // RTMP_MAC_USB //
RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
// send wireless event to wpa_supplicant for infroming interface down.
RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // WPA_SUPPLICANT_SUPPORT //
MlmeRadioOff(pAd);
}
#endif // CONFIG_STA_SUPPORT //
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
for (i = 0 ; i < NUM_OF_TX_RING; i++)
{
while (pAd->DeQueueRunning[i] == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("Waiting for TxQueue[%d] done..........\n", i));
RTMPusecDelay(1000);
}
}
#ifdef RTMP_MAC_USB
// ensure there are no more active urbs.
add_wait_queue (&unlink_wakeup, &wait);
pAd->wait = &unlink_wakeup;
// maybe wait for deletions to finish.
i = 0;
//while((i < 25) && atomic_read(&pAd->PendingRx) > 0)
while(i < 25)
{
unsigned long IrqFlags;
RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
if (pAd->PendingRx == 0)
{
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
break;
}
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,9)
msleep(UNLINK_TIMEOUT_MS); //Time in millisecond
#else
RTMPusecDelay(UNLINK_TIMEOUT_MS*1000); //Time in microsecond
#endif
i++;
}
pAd->wait = NULL;
remove_wait_queue (&unlink_wakeup, &wait);
#endif // RTMP_MAC_USB //
// Stop Mlme state machine
MlmeHalt(pAd);
// Close net tasklets
RtmpNetTaskExit(pAd);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
MacTableReset(pAd);
}
#endif // CONFIG_STA_SUPPORT //
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
#ifdef WSC_INCLUDED
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
WscStop(pAd,
&pAd->StaCfg.WscControl);
#endif // CONFIG_STA_SUPPORT //
#ifdef OLD_DH_KEY
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
WSC_VFREE_KEY_MEM(pAd->StaCfg.WscControl.pPubKeyMem, pAd->StaCfg.WscControl.pSecKeyMem);
#endif // CONFIG_STA_SUPPORT //
#endif // OLD_DH_KEY //
#ifndef OLD_DH_KEY
DH_freeall();
#endif // OLD_DH_KEY //
/* WSC hardware push button function 0811 */
WSC_HDR_BTN_Stop(pAd);
#endif // WSC_INCLUDED //
// Close kernel threads
RtmpMgmtTaskExit(pAd);
// Free IRQ
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
// Free Ring or USB buffers
RTMPFreeTxRxRingMemory(pAd);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
#ifdef DOT11_N_SUPPORT
// Free BA reorder resource
ba_reordering_resource_release(pAd);
#endif // DOT11_N_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
#endif // CONFIG_STA_SUPPORT //
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
/*+++Modify by woody to solve the bulk fail+++*/
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef RT35xx
if (IS_RT3572(pAd))
{
RT30xxWriteRFRegister(pAd, RF_R08, 0x00);
AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
}
#endif // RT35xx //
}
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("<=== rt28xx_close\n"));
return 0; // close ok
} /* End of rt28xx_close */
