VOS_VOID NAS_RABM_VoicePreferActivateJudgeStepOne(VOS_VOID)
{
VOS_UINT32 ulVpActMatch;
VOS_UINT32 ulOldVpStatus;
ulVpActMatch = NAS_RABM_IsVpActivateMatchInStepOne();
ulOldVpStatus = NAS_RABM_VoicePreferGetVpStatus();
/* 不满足初步激活条件*/
if (VOS_FALSE == ulVpActMatch)
{
/* 定时器超时事件可能在队列中，就处理了AP 下发的停止VoicePrefer ,延迟超时处理中需要判断该标志 */
NAS_RABM_VoicePreferSetStopVpFlag(VOS_TRUE);
/* 把延迟激活和重试查询GMM定时器停止,函数里面会判断定时器是否启动 */
NAS_RabmStopTimer(RABM_TIMER_NAME_COMMON, RABM_TIMER_VOICEPREFER_DELAY);
NAS_RabmStopTimer(RABM_TIMER_NAME_COMMON, RABM_TIMER_VOICEPREFER_REQRY_GMM_DELAY);
/* 当前已经处于激活状态*/
if (VOS_TRUE == ulOldVpStatus)
{
/* 使VP去激活，并通知其他模块*/
NAS_RABM_VoicePreferSetVpStatus(VOS_FALSE);
NAS_RABM_SendVpActIndToOtherModule(VOS_FALSE);
}
/* 当前不处于激活状态,前面已经处理，这里不再进行任何操作*/
}
/* 满足初步激活条件 */
else
{ /*满足初步激活条件并且已经处于激活态不需要任何操作*/
if(VOS_TRUE == ulOldVpStatus)
{
NAS_NORMAL_LOG(WUEPS_PID_RABM,
"NAS_RABM_VoicePreferActivateJudgeStepOne: VP Already Activated");
}
/* 满足初步激活条件但是当前并没有处于激活状态 */
else
{
/* 如果延迟定时器没有启动,启动延迟定时器*/
if(NAS_RABM_TIMER_STATUS_STOP
== NAS_RABM_CheckTimerStatus(RABM_TIMER_NAME_COMMON,RABM_TIMER_VOICEPREFER_DELAY))
{
NAS_RabmStartTimer(RABM_TIMER_NAME_COMMON, RABM_TIMER_VOICEPREFER_DELAY);
/* 延迟激活定时器启动时应停止延迟查询GMM定时器 */
NAS_RabmStopTimer(RABM_TIMER_NAME_COMMON, RABM_TIMER_VOICEPREFER_REQRY_GMM_DELAY);
NAS_RABM_VoicePreferSetStopVpFlag(VOS_FALSE);
}
/* 如果延迟定时器已经启动,保持原来定时器不重新启动*/
}
}
return;
}
VOS_VOID NAS_RABM_VoicePreferDelayExpired(VOS_VOID)
{
/* 停止定时器 */
NAS_RabmStopTimer(RABM_TIMER_NAME_COMMON, RABM_TIMER_VOICEPREFER_DELAY);
/* 定时器超时事件可能在队列中，就处理了AP 下发的停止VoicePrefer ,这种
场景不再激活VP */
if (VOS_TRUE == NAS_RABM_VoicePreferGetStopVpFlag())
{
NAS_NORMAL_LOG(WUEPS_PID_RABM,
"NAS_RABM_VoicePreferDelayExpired: Have Receive AP Stop VoicePrefer,So Donot Send Gmm Qry!");
return;
}
/* 查询是否存在GMM专有流程 */
NAS_RABM_SndGmmMmlProcStatusQryReq(RABM_VOICEPREFER_ENUM);
/* 初次查询清重试查询次数*/
NAS_RABM_VoicePreferClrReQryGmmCnt();
return;
}
VOS_VOID NAS_RABM_VoicePreferActivateJudgeStepTwo(VOS_VOID)
{
VOS_UINT32 ulVpActMatchInStepOne;
ulVpActMatchInStepOne = NAS_RABM_IsVpActivateMatchInStepOne();
/* 初步激活条件不再满足不激活VP */
if (VOS_FALSE == ulVpActMatchInStepOne)
{
NAS_NORMAL_LOG(WUEPS_PID_RABM,
"NAS_RABM_VoicePreferActivateJudgeStepTwo: ulVpActStepOne Not Matched,So Cannot Act VP");
}
/* 初步激活条件仍然满足需要激活VP */
else
{
NAS_RABM_VoicePreferSetVpStatus(VOS_TRUE);
/*给其他模块发送VP激活指示*/
NAS_RABM_SendVpActIndToOtherModule(VOS_TRUE);
}
return;
}
VOS_UINT32 NAS_MMC_RcvLmmMmcStatusInd_SysCfg_WaitEpsConnRelInd(
VOS_UINT32 ulEventType,
struct MsgCB *pstMsg
)
{
MMA_MMC_SYS_CFG_SET_REQ_STRU *pstSysCfgMsg = VOS_NULL_PTR;
NAS_MMC_ENTRY_MSG_STRU *pstEntryMsg = VOS_NULL_PTR;
LMM_MMC_STATUS_IND_STRU *pstLmmStatusIndMsg = VOS_NULL_PTR;
NAS_MML_NET_RAT_TYPE_ENUM_UINT8 enNextRat;
pstLmmStatusIndMsg = (LMM_MMC_STATUS_IND_STRU*)pstMsg;
/* 获取SYSCFG状态机的入口消息信息 */
pstEntryMsg = NAS_MMC_GetCurrEntryMsg();
pstSysCfgMsg = (MMA_MMC_SYS_CFG_SET_REQ_STRU*)(pstEntryMsg->aucEntryMsgBuffer);
if ( VOS_FALSE == pstLmmStatusIndMsg->bitOpConnState)
{
NAS_NORMAL_LOG(WUEPS_PID_MMC, "NAS_MMC_RcvLmmMmcStatusInd_SysCfg_WaitEpsConnRelInd:bitOpConnState IS VOS_FALSE");
return VOS_TRUE;
}
/* 更新LMM的链接状态 */
switch (pstLmmStatusIndMsg->ulConnState)
{
case MMC_LMM_CONN_ESTING:
case MMC_LMM_CONNECTED_SIG:
NAS_MML_SetEpsSigConnStatusFlg(VOS_TRUE);
NAS_MML_SetEpsServiceConnStatusFlg(VOS_FALSE);
break;
case MMC_LMM_CONNECTED_DATA:
NAS_MML_SetEpsServiceConnStatusFlg(VOS_TRUE);
break;
case MMC_LMM_CONN_IDLE:
NAS_MML_SetEpsSigConnStatusFlg(VOS_FALSE);
NAS_MML_SetEpsServiceConnStatusFlg(VOS_FALSE);
break;
default:
break;
}
/* 如果存在信令连接，则继续等待 */
if (VOS_TRUE == NAS_MML_IsRrcConnExist())
{
return VOS_TRUE;
}
/* 停止等待链接释放定时器 */
NAS_MMC_StopTimer(TI_NAS_MMC_WAIT_EPS_CONN_REL_IND);
/* 取得目标模的接入技术，并发送SYSCFG请求 */
enNextRat = NAS_MMC_GetNextSettingRat_SysCfg();
NAS_MMC_SetRatModeSysCfgReq_SysCfg(enNextRat, pstSysCfgMsg);
return VOS_TRUE;
}
