static int LoadApp(struct NaClApp *nap, struct NaClChromeMainArgs *args) {
NaClErrorCode errcode = LOAD_OK;
CHECK(g_initialized);
/* Allow or disallow dyncode API based on args. */
nap->enable_dyncode_syscalls = args->enable_dyncode_syscalls;
nap->initial_nexe_max_code_bytes = args->initial_nexe_max_code_bytes;
nap->pnacl_mode = args->pnacl_mode;
#if NACL_LINUX
g_prereserved_sandbox_size = args->prereserved_sandbox_size;
#endif
#if NACL_LINUX || NACL_OSX
/*
* Overwrite value of sc_nprocessors_onln set in NaClAppCtor. In
* the Chrome embedding, the outer sandbox was already enabled when
* the NaClApp Ctor was invoked, so a bogus value was written in
* sc_nprocessors_onln.
*/
if (-1 != args->number_of_cores) {
nap->sc_nprocessors_onln = args->number_of_cores;
}
#endif
if (args->create_memory_object_func != NULL)
NaClSetCreateMemoryObjectFunc(args->create_memory_object_func);
/* Inject the validation caching interface, if it exists. */
nap->validation_cache = args->validation_cache;
NaClAppInitialDescriptorHookup(nap);
/*
* in order to report load error to the browser plugin through the
* secure command channel, we do not immediate jump to cleanup code
* on error. rather, we continue processing (assuming earlier
* errors do not make it inappropriate) until the secure command
* channel is set up, and then bail out.
*/
/*
* Ensure this operating system platform is supported.
*/
if (args->skip_qualification) {
fprintf(stderr, "PLATFORM QUALIFICATION DISABLED - "
"Native Client's sandbox will be unreliable!\n");
} else {
errcode = NACL_FI_VAL("pq", NaClErrorCode,
NaClRunSelQualificationTests());
if (LOAD_OK != errcode) {
nap->module_load_status = errcode;
fprintf(stderr, "Error while loading in SelMain: %s\n",
NaClErrorString(errcode));
goto error;
}
}
/*
* Patch the Windows exception dispatcher to be safe in the case
* of faults inside x86-64 sandboxed code. The sandbox is not
* secure on 64-bit Windows without this.
*/
#if (NACL_WINDOWS && NACL_ARCH(NACL_BUILD_ARCH) == NACL_x86 && \
NACL_BUILD_SUBARCH == 64)
NaClPatchWindowsExceptionDispatcher();
#endif
NaClSignalTestCrashOnStartup();
nap->enable_exception_handling = args->enable_exception_handling;
if (args->enable_exception_handling || args->enable_debug_stub) {
#if NACL_LINUX
/* NaCl's signal handler is always enabled on Linux. */
#elif NACL_OSX
if (!NaClInterceptMachExceptions()) {
NaClLog(LOG_FATAL, "LoadApp: Failed to set up Mach exception handler\n");
}
#elif NACL_WINDOWS
nap->attach_debug_exception_handler_func =
args->attach_debug_exception_handler_func;
#else
# error Unknown host OS
#endif
}
#if NACL_LINUX
NaClSignalHandlerInit();
#endif
/* Give debuggers a well known point at which xlate_base is known. */
NaClGdbHook(nap);
CHECK(args->nexe_desc != NULL);
NaClAppLoadModule(nap, args->nexe_desc);
NaClDescUnref(args->nexe_desc);
args->nexe_desc = NULL;
NACL_FI_FATAL("BeforeLoadIrt");
/*
* error reporting done; can quit now if there was an error earlier.
*/
errcode = NaClGetLoadStatus(nap);
if (LOAD_OK != errcode) {
goto error;
}
/*
* Load the integrated runtime (IRT) library.
* Skip if irt_load_optional and the nexe doesn't have the usual 256MB
* segment gap. PNaCl's disabling of the segment gap doesn't actually
* disable the segment gap. It only only reduces it drastically.
*/
if (args->irt_load_optional && nap->dynamic_text_end < 0x10000000) {
NaClLog(1,
"Skipped NaClLoadIrt, irt_load_optional with dynamic_text_end: %"
NACL_PRIxPTR"\n", nap->dynamic_text_end);
} else {
if (args->irt_fd != -1) {
CHECK(args->irt_desc == NULL);
args->irt_desc = IrtDescFromFd(args->irt_fd);
args->irt_fd = -1;
}
if (args->irt_desc != NULL) {
NaClLoadIrt(nap, args->irt_desc);
NaClDescUnref(args->irt_desc);
args->irt_desc = NULL;
}
}
if (args->enable_debug_stub) {
#if NACL_LINUX || NACL_OSX
if (args->debug_stub_pipe_fd != NACL_INVALID_HANDLE) {
NaClDebugStubSetPipe(args->debug_stub_pipe_fd);
} else if (args->debug_stub_server_bound_socket_fd != NACL_INVALID_SOCKET) {
NaClDebugSetBoundSocket(args->debug_stub_server_bound_socket_fd);
}
#endif
if (!NaClDebugInit(nap)) {
goto error;
}
#if NACL_WINDOWS
if (NULL != args->debug_stub_server_port_selected_handler_func) {
args->debug_stub_server_port_selected_handler_func(
NaClDebugGetBoundPort());
}
#endif
}
if (args->load_status_handler_func != NULL) {
args->load_status_handler_func(LOAD_OK);
}
return LOAD_OK;
error:
fflush(stdout);
/* Don't return LOAD_OK if we had some failure loading. */
if (LOAD_OK == errcode) {
errcode = LOAD_INTERNAL;
}
/*
* If there is a load status callback, call that now and transfer logs
* in preparation for process exit.
*/
if (args->load_status_handler_func != NULL) {
args->load_status_handler_func(errcode);
NaClLog(LOG_ERROR, "NaCl LoadApp failed. Transferring logs before exit.\n");
NaClLogRunAbortBehavior();
}
return errcode;
}
static int LoadApp(struct NaClApp *nap, struct NaClChromeMainArgs *args) {
NaClErrorCode errcode = LOAD_OK;
int has_bootstrap_channel = args->imc_bootstrap_handle != NACL_INVALID_HANDLE;
CHECK(g_initialized);
/* Allow or disallow dyncode API based on args. */
nap->enable_dyncode_syscalls = args->enable_dyncode_syscalls;
nap->initial_nexe_max_code_bytes = args->initial_nexe_max_code_bytes;
nap->pnacl_mode = args->pnacl_mode;
#if NACL_LINUX
g_prereserved_sandbox_size = args->prereserved_sandbox_size;
#endif
#if NACL_LINUX || NACL_OSX
/*
* Overwrite value of sc_nprocessors_onln set in NaClAppCtor. In
* the Chrome embedding, the outer sandbox was already enabled when
* the NaClApp Ctor was invoked, so a bogus value was written in
* sc_nprocessors_onln.
*/
if (-1 != args->number_of_cores) {
nap->sc_nprocessors_onln = args->number_of_cores;
}
#endif
if (args->create_memory_object_func != NULL)
NaClSetCreateMemoryObjectFunc(args->create_memory_object_func);
/* Inject the validation caching interface, if it exists. */
nap->validation_cache = args->validation_cache;
#if NACL_WINDOWS
if (args->broker_duplicate_handle_func != NULL)
NaClSetBrokerDuplicateHandleFunc(args->broker_duplicate_handle_func);
#endif
NaClAppInitialDescriptorHookup(nap);
/*
* NACL_SERVICE_PORT_DESCRIPTOR and NACL_SERVICE_ADDRESS_DESCRIPTOR
* are 3 and 4.
*/
/*
* in order to report load error to the browser plugin through the
* secure command channel, we do not immediate jump to cleanup code
* on error. rather, we continue processing (assuming earlier
* errors do not make it inappropriate) until the secure command
* channel is set up, and then bail out.
*/
/*
* Ensure this operating system platform is supported.
*/
if (args->skip_qualification) {
fprintf(stderr, "PLATFORM QUALIFICATION DISABLED - "
"Native Client's sandbox will be unreliable!\n");
} else {
errcode = NACL_FI_VAL("pq", NaClErrorCode,
NaClRunSelQualificationTests());
if (LOAD_OK != errcode) {
nap->module_load_status = errcode;
fprintf(stderr, "Error while loading in SelMain: %s\n",
NaClErrorString(errcode));
}
}
/*
* Patch the Windows exception dispatcher to be safe in the case
* of faults inside x86-64 sandboxed code. The sandbox is not
* secure on 64-bit Windows without this.
*/
#if (NACL_WINDOWS && NACL_ARCH(NACL_BUILD_ARCH) == NACL_x86 && \
NACL_BUILD_SUBARCH == 64)
NaClPatchWindowsExceptionDispatcher();
#endif
NaClSignalTestCrashOnStartup();
nap->enable_exception_handling = args->enable_exception_handling;
if (args->enable_exception_handling || args->enable_debug_stub) {
#if NACL_LINUX
/* NaCl's signal handler is always enabled on Linux. */
#elif NACL_OSX
if (!NaClInterceptMachExceptions()) {
NaClLog(LOG_FATAL, "LoadApp: Failed to set up Mach exception handler\n");
}
#elif NACL_WINDOWS
nap->attach_debug_exception_handler_func =
args->attach_debug_exception_handler_func;
#else
# error Unknown host OS
#endif
}
#if NACL_LINUX
NaClSignalHandlerInit();
#endif
/* Give debuggers a well known point at which xlate_base is known. */
NaClGdbHook(nap);
if (has_bootstrap_channel) {
NaClCreateServiceSocket(nap);
/*
* LOG_FATAL errors that occur before NaClSetUpBootstrapChannel will
* not be reported via the crash log mechanism (for Chromium
* embedding of NaCl, shown in the JavaScript console).
*
* Some errors, such as due to NaClRunSelQualificationTests, do not
* trigger a LOG_FATAL but instead set module_load_status to be sent
* in the start_module RPC reply. Log messages associated with such
* errors would be seen, since NaClSetUpBootstrapChannel will get
* called.
*/
NaClSetUpBootstrapChannel(nap, args->imc_bootstrap_handle);
}
CHECK(args->nexe_desc != NULL);
NaClAppLoadModule(nap, args->nexe_desc, NULL, NULL);
NaClDescUnref(args->nexe_desc);
args->nexe_desc = NULL;
if (has_bootstrap_channel) {
NACL_FI_FATAL("BeforeSecureCommandChannel");
/*
* Spawns a thread that uses the command channel.
* Hereafter any changes to nap should be done while holding locks.
*/
NaClSecureCommandChannel(nap);
NaClLog(4, "NaClSecureCommandChannel has spawned channel\n");
NaClLog(4, "secure service = %"NACL_PRIxPTR"\n",
(uintptr_t) nap->secure_service);
}
NACL_FI_FATAL("BeforeLoadIrt");
/*
* error reporting done; can quit now if there was an error earlier.
*/
if (LOAD_OK == errcode) {
errcode = NaClGetLoadStatus(nap);
}
if (LOAD_OK != errcode) {
goto done;
}
/*
* Load the integrated runtime (IRT) library.
* Skip if irt_load_optional and the nexe doesn't have the usual 256MB
* segment gap. PNaCl's disabling of the segment gap doesn't actually
* disable the segment gap. It only only reduces it drastically.
*/
if (args->irt_load_optional && nap->dynamic_text_end < 0x10000000) {
NaClLog(1,
"Skipped NaClLoadIrt, irt_load_optional with dynamic_text_end: %"
NACL_PRIxPTR"\n", nap->dynamic_text_end);
} else {
if (args->irt_fd != -1) {
CHECK(args->irt_desc == NULL);
args->irt_desc = IrtDescFromFd(args->irt_fd);
args->irt_fd = -1;
}
if (args->irt_desc != NULL) {
NaClLoadIrt(nap, args->irt_desc);
NaClDescUnref(args->irt_desc);
args->irt_desc = NULL;
}
}
if (args->enable_debug_stub) {
#if NACL_LINUX || NACL_OSX
if (args->debug_stub_pipe_fd != NACL_INVALID_HANDLE) {
NaClDebugStubSetPipe(args->debug_stub_pipe_fd);
} else if (args->debug_stub_server_bound_socket_fd != NACL_INVALID_SOCKET) {
NaClDebugSetBoundSocket(args->debug_stub_server_bound_socket_fd);
}
#endif
if (!NaClDebugInit(nap)) {
goto done;
}
#if NACL_WINDOWS
if (NULL != args->debug_stub_server_port_selected_handler_func) {
args->debug_stub_server_port_selected_handler_func(
NaClDebugGetBoundPort());
}
#endif
}
if (args->load_status_handler_func != NULL) {
args->load_status_handler_func(LOAD_OK);
}
return LOAD_OK;
done:
fflush(stdout);
/*
* If there is a load status callback, call that now and transfer logs
* in preparation for process exit.
*/
if (args->load_status_handler_func != NULL) {
/* Don't return LOAD_OK if we had some failure loading. */
if (LOAD_OK == errcode) {
errcode = LOAD_INTERNAL;
}
args->load_status_handler_func(errcode);
NaClLog(LOG_ERROR, "NaCl LoadApp failed. Transferring logs before exit.\n");
NaClLogRunAbortBehavior();
/*
* Fall through and run NaClBlockIfCommandChannelExists.
* TODO(jvoung): remove NaClBlockIfCommandChannelExists() and use the
* callback to indicate the load_status after Chromium no longer calls
* start_module. We also need to change Chromium so that it does not
* attempt to set up the command channel if there is a known load error.
* Otherwise there is a race between this process's exit / load error
* reporting, and the command channel setup on the Chromium side (plus
* the associated reporting). Thus this could end up with two different
* load errors being reported (1) the real load error from here, and
* (2) the command channel setup failure because the process exited in
* the middle of setting up the command channel.
*/
}
/*
* If there is a secure command channel, we sent an RPC reply with
* the reason that the nexe was rejected. If we exit now, that
* reply may still be in-flight and the various channel closure (esp
* reverse channel) may be detected first. This would result in a
* crash being reported, rather than the error in the RPC reply.
* Instead, we wait for the hard-shutdown on the command channel.
*/
if (LOAD_OK != errcode) {
NaClBlockIfCommandChannelExists(nap);
} else {
/*
* Don't return LOAD_OK if we had some failure loading.
*/
errcode = LOAD_INTERNAL;
}
return errcode;
}