/**
* This routine returns the next point in the micro-feature
* outline that is an extremity. The search starts after
* EdgePoint. The routine assumes that the outline being
* searched is not a degenerate outline (i.e. it must have
* 2 or more edge points).
* @param EdgePoint start search from this point
* @return Next extremity in the outline after EdgePoint.
* @note Globals: none
* @note Exceptions: none
* @note History: 7/26/89, DSJ, Created.
*/
MFOUTLINE NextExtremity(MFOUTLINE EdgePoint) {
EdgePoint = NextPointAfter(EdgePoint);
while (!PointAt(EdgePoint)->ExtremityMark)
EdgePoint = NextPointAfter(EdgePoint);
return (EdgePoint);
} /* NextExtremity */
void Envelope::testMe()
{
double t0=0, t1=0;
SetInterpolateDB(false);
Mirror(false);
Flatten(0.5);
checkResult( 1, Integral(0.0,100.0), 50);
checkResult( 2, Integral(-10.0,10.0), 10);
Flatten(0.5);
checkResult( 3, Integral(0.0,100.0), 50);
checkResult( 4, Integral(-10.0,10.0), 10);
checkResult( 5, Integral(-20.0,-10.0), 5);
Flatten(0.5);
Insert( 5.0, 0.5 );
checkResult( 6, Integral(0.0,100.0), 50);
checkResult( 7, Integral(-10.0,10.0), 10);
Flatten(0.0);
Insert( 0.0, 0.0 );
Insert( 5.0, 1.0 );
Insert( 10.0, 0.0 );
t0 = 10.0 - .1;
t1 = 10.0 + .1;
double result = Integral(0.0,t1);
double resulta = Integral(0.0,t0);
double resultb = Integral(t0,t1);
// Integrals should be additive
checkResult( 8, result - resulta - resultb, 0);
Flatten(0.0);
Insert( 0.0, 0.0 );
Insert( 5.0, 1.0 );
Insert( 10.0, 0.0 );
t0 = 10.0 - .1;
t1 = 10.0 + .1;
checkResult( 9, Integral(0.0,t1), 5);
checkResult( 10, Integral(0.0,t0), 4.999);
checkResult( 11, Integral(t0,t1), .001);
WX_CLEAR_ARRAY(mEnv);
Insert( 0.0, 0.0 );
Insert( 5.0, 1.0 );
Insert( 10.0, 0.0 );
checkResult( 12, NumberOfPointsAfter( -1 ), 3 );
checkResult( 13, NumberOfPointsAfter( 0 ), 2 );
checkResult( 14, NumberOfPointsAfter( 1 ), 2 );
checkResult( 15, NumberOfPointsAfter( 5 ), 1 );
checkResult( 16, NumberOfPointsAfter( 7 ), 1 );
checkResult( 17, NumberOfPointsAfter( 10 ), 0 );
checkResult( 18, NextPointAfter( 0 ), 5 );
checkResult( 19, NextPointAfter( 5 ), 10 );
}
/*---------------------------------------------------------------------------*/
void ConvertToPicoFeatures2(MFOUTLINE Outline, FEATURE_SET FeatureSet) {
/*
** Parameters:
** Outline outline to extract micro-features from
** FeatureSet set of features to add pico-features to
** Globals:
** classify_pico_feature_length
** length of features to be extracted
** Operation:
** This routine steps thru the specified outline and cuts it
** up into pieces of equal length. These pieces become the
** desired pico-features. Each segment in the outline
** is converted into an integral number of pico-features.
** Return: none (results are returned in FeatureSet)
** Exceptions: none
** History: 4/30/91, DSJ, Adapted from ConvertToPicoFeatures().
*/
MFOUTLINE Next;
MFOUTLINE First;
MFOUTLINE Current;
if (DegenerateOutline(Outline))
return;
First = Outline;
Current = First;
Next = NextPointAfter(Current);
do {
/* note that an edge is hidden if the ending point of the edge is
marked as hidden. This situation happens because the order of
the outlines is reversed when they are converted from the old
format. In the old format, a hidden edge is marked by the
starting point for that edge. */
if (!(PointAt(Next)->Hidden))
ConvertSegmentToPicoFeat (&(PointAt(Current)->Point),
&(PointAt(Next)->Point), FeatureSet);
Current = Next;
Next = NextPointAfter(Current);
}
while (Current != First);
} /* ConvertToPicoFeatures2 */
/**
* This routine normalizes the coordinates of the specified
* outline so that the outline is deskewed down to the
* baseline, translated so that x=0 is at XOrigin, and scaled
* so that the height of a character cell from descender to
* ascender is 1. Of this height, 0.25 is for the descender,
* 0.25 for the ascender, and 0.5 for the x-height. The
* y coordinate of the baseline is 0.
* @param Outline outline to be normalized
* @param XOrigin x-origin of text
* @return none
* @note Globals: none
* @note Exceptions: none
* @note History: 8/2/89, DSJ, Created.
*/
void NormalizeOutline(MFOUTLINE Outline,
FLOAT32 XOrigin) {
if (Outline == NIL_LIST)
return;
MFOUTLINE EdgePoint = Outline;
do {
MFEDGEPT *Current = PointAt(EdgePoint);
Current->Point.y = MF_SCALE_FACTOR *
(Current->Point.y - kBlnBaselineOffset);
Current->Point.x = MF_SCALE_FACTOR * (Current->Point.x - XOrigin);
EdgePoint = NextPointAfter(EdgePoint);
} while (EdgePoint != Outline);
} /* NormalizeOutline */
/**
* This routine searches through the specified outline, computes
* a slope for each vector in the outline, and marks each
* vector as having one of the following directions:
* N, S, E, W, NE, NW, SE, SW
* This information is then stored in the outline and the
* outline is returned.
* @param Outline micro-feature outline to analyze
* @param MinSlope controls "snapping" of segments to horizontal
* @param MaxSlope controls "snapping" of segments to vertical
* @return none
* @note Exceptions: none
* @note History: 7/21/89, DSJ, Created.
*/
void FindDirectionChanges(MFOUTLINE Outline,
FLOAT32 MinSlope,
FLOAT32 MaxSlope) {
MFEDGEPT *Current;
MFEDGEPT *Last;
MFOUTLINE EdgePoint;
if (DegenerateOutline (Outline))
return;
Last = PointAt (Outline);
Outline = NextPointAfter (Outline);
EdgePoint = Outline;
do {
Current = PointAt (EdgePoint);
ComputeDirection(Last, Current, MinSlope, MaxSlope);
Last = Current;
EdgePoint = NextPointAfter (EdgePoint);
}
while (EdgePoint != Outline);
} /* FindDirectionChanges */
