//The setup function is called once at startup of the sketch
void setup()
{
// Add your initialization code here
// Note : This will initialize Serial port on Arduino at 115200 bauds
OC_LOG_INIT();
OC_LOG(DEBUG, TAG, PCF("OCServer is starting..."));
uint16_t port = OC_WELL_KNOWN_PORT;
// Connect to Ethernet or WiFi network
if (ConnectToNetwork() != 0)
{
OC_LOG(ERROR, TAG, PCF("Unable to connect to network"));
return;
}
// Initialize the OC Stack in Server mode
if (OCInit(NULL, port, OC_SERVER) != OC_STACK_OK)
{
OC_LOG(ERROR, TAG, PCF("OCStack init error"));
return;
}
// Declare and create the example resource: Light
createLightResource();
}
//The setup function is called once at startup of the sketch
void setup()
{
pinMode(dht11_pin, OUTPUT);
digitalWrite(dht11_pin, HIGH);
// Add your initialization code here
OC_LOG_INIT();
OC_LOG(DEBUG, TAG, PCF("OCServer is starting..."));
uint16_t port = OC_WELL_KNOWN_PORT;
// Connect to Ethernet or WiFi network
if (ConnectToNetwork() != 0)
{
OC_LOG(ERROR, TAG, "Unable to connect to network");
return;
}
// Initialize the OC Stack in Server mode
if (OCInit(NULL, port, OC_SERVER) != OC_STACK_OK)
{
OC_LOG(ERROR, TAG, PCF("OCStack init error"));
return;
}
OCStartPresence(60);
// Declare and create the example resource: TH
createTHResource();
}
//The setup function is called once at startup of the sketch
void setup()
{
// Add your initialization code here
// Note : This will initialize Serial port on Arduino at 115200 bauds
OC_LOG_INIT();
OC_LOG(DEBUG, TAG, ("Demoserver is starting..."));
// Connect to Ethernet or WiFi network
if (ConnectToNetwork() != 0) {
OC_LOG(ERROR, TAG, ("Unable to connect to network"));
return;
}
// Initialize the OC Stack in Server mode
if (OCInit(NULL, 0, OC_SERVER) != OC_STACK_OK) {
OC_LOG(ERROR, TAG, ("OCStack init error"));
return;
}
// Initialize Grove related Devices
sensor_init();
led_init();
lcd_init();
buzzer_init();
button_init();
// Declare and create the resource: grove
createDemoResource();
}
//The setup function is called once at startup of the sketch
void setup()
{
// Add your initialization code here
// Note : This will initialize Serial port on Arduino at 115200 bauds
OC_LOG_INIT();
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH); //Deselect the SD card
pinMode(FANPIN, OUTPUT);
digitalWrite(FANPIN, LOW);
Serial.println("OCServer is starting...");
unsigned int port = OC_WELL_KNOWN_PORT;
// Connect to Ethernet or WiFi network
if (ConnectToNetwork() != 0)
{
Serial.println("Unable to connect to network");
return;
}
Serial.println("Connected to Ethernet network");
// Initialize the OC Stack in Server mode
if (OCInit(NULL, port, OC_SERVER) != OC_STACK_OK)
{
Serial.println("OCStack init error");
return;
}
Serial.println("OC Initialized");
// Declare and create the resource: Fan
createFanResource();
}
//The setup function is called once at startup of the sketch
void setup()
{
Serial.begin(115200);
// Add your initialization code here
OC_LOG_INIT();
OC_LOG(DEBUG, TAG, PCF("OCServer is starting..."));
// uint16_t port = OC_WELL_KNOWN_PORT;
// Connect to Ethernet or WiFi network
if (ConnectToNetwork() != 0)
{
OC_LOG(ERROR, TAG, "Unable to connect to network");
return;
}
// Initialize the OC Stack in Server mode
if (OCInit(NULL, OC_WELL_KNOWN_PORT, OC_SERVER) != OC_STACK_OK)
{
OC_LOG(ERROR, TAG, PCF("OCStack init error"));
return;
}
OCStartPresence(60);
// Declare and create the example resource
createResource();
// This call displays the amount of free SRAM available on Arduino
PrintArduinoMemoryStats();
#if (ARDUINO == 0)
ble.init( (long)115200, BLE_MASTER, trackeeID);
#elif (ARDUINO == 1)
ble.init( (long)115200, BLE_SLAVER, slaveList[0]);
#elif (ARDUINO == 2)
ble.init( (long)115200, BLE_SLAVER, slaveList[1]);
#endif
// ble.StatusRead();
OC_LOG_V(INFO, TAG, "Program Start-\r\n");
}