bool PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosition,
EDA_ITEM* aItem )
{
if( aHotkeyCode == 0 )
return false;
bool itemCurrentlyEdited = GetCurItem() && GetCurItem()->GetFlags();
MODULE* module = NULL;
int evt_type = 0; //Used to post a wxCommandEvent on demand
PCB_SCREEN* screen = GetScreen();
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
/* Convert lower to upper case
* (the usual toupper function has problem with non ascii codes like function keys
*/
if( (aHotkeyCode >= 'a') && (aHotkeyCode <= 'z') )
aHotkeyCode += 'A' - 'a';
EDA_HOTKEY* HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, board_edit_Hotkey_List );
if( HK_Descr == NULL )
return false;
int hk_id = HK_Descr->m_Idcommand;
// Create a wxCommandEvent that will be posted in some hot keys functions
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
LAYER_NUM ll;
switch( hk_id )
{
default:
case HK_NOT_FOUND:
return false;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_SWITCH_TRACK_WIDTH_TO_NEXT:
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
if( GetDesignSettings().GetTrackWidthIndex() < GetDesignSettings().m_TrackWidthList.size() - 1 )
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().GetTrackWidthIndex() + 1 );
else
GetDesignSettings().SetTrackWidthIndex( 0 );
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
break;
case HK_SWITCH_TRACK_WIDTH_TO_PREVIOUS:
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
if( GetDesignSettings().GetTrackWidthIndex() <= 0 )
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().m_TrackWidthList.size() -1 );
else
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().GetTrackWidthIndex() - 1 );
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
break;
case HK_SWITCH_GRID_TO_FASTGRID1:
SetFastGrid1();
break;
case HK_SWITCH_GRID_TO_FASTGRID2:
SetFastGrid2();
break;
case HK_SWITCH_GRID_TO_NEXT:
evt_type = ID_POPUP_GRID_NEXT;
break;
case HK_SWITCH_GRID_TO_PREVIOUS:
evt_type = ID_POPUP_GRID_PREV;
break;
case HK_SWITCH_LAYER_TO_PREVIOUS:
ll = GetActiveLayer();
if( !IsCopperLayer( ll ) )
break;
if( ll == F_Cu )
ll = B_Cu;
else if( ll == B_Cu )
ll = ToLAYER_ID( GetBoard()->GetCopperLayerCount() - 2 );
else
ll = ll - 1;
SwitchLayer( aDC, ToLAYER_ID( ll ) );
break;
case HK_SWITCH_LAYER_TO_NEXT:
ll = GetActiveLayer();
if( !IsCopperLayer( ll ) )
break;
if( ll == B_Cu )
ll = F_Cu;
else if( ++ll >= GetBoard()->GetCopperLayerCount() - 1 )
ll = B_Cu;
SwitchLayer( aDC, ToLAYER_ID( ll ) );
break;
case HK_SWITCH_LAYER_TO_COMPONENT:
SwitchLayer( aDC, F_Cu );
break;
case HK_SWITCH_LAYER_TO_COPPER:
SwitchLayer( aDC, B_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER1:
SwitchLayer( aDC, In1_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER2:
SwitchLayer( aDC, In2_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER3:
SwitchLayer( aDC, In3_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER4:
SwitchLayer( aDC, In4_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER5:
SwitchLayer( aDC, In5_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER6:
SwitchLayer( aDC, In6_Cu );
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Board_Editor_Hotkeys_Descr );
break;
case HK_PREFERENCES:
evt_type = wxID_PREFERENCES;
break;
case HK_ZOOM_IN:
evt_type = ID_KEY_ZOOM_IN;
break;
case HK_ZOOM_OUT:
evt_type = ID_KEY_ZOOM_OUT;
break;
case HK_ZOOM_REDRAW:
evt_type = ID_ZOOM_REDRAW;
break;
case HK_ZOOM_AUTO:
evt_type = ID_ZOOM_PAGE;
break;
case HK_ZOOM_CENTER:
evt_type = ID_POPUP_ZOOM_CENTER;
break;
case HK_ZOOM_SELECTION:
evt_type = ID_ZOOM_SELECTION;
break;
case HK_ADD_MODULE:
evt_type = ID_PCB_MODULE_BUTT;
break;
case HK_UNDO:
case HK_REDO:
if( !itemCurrentlyEdited )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED, HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_RESET_LOCAL_COORD: // Set the relative coord
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_SET_GRID_ORIGIN:
PCBNEW_CONTROL::SetGridOrigin( GetGalCanvas()->GetView(), this,
new KIGFX::ORIGIN_VIEWITEM( GetGridOrigin(), UR_TRANSIENT ),
GetCrossHairPosition() );
m_canvas->Refresh();
break;
case HK_RESET_GRID_ORIGIN:
PCBNEW_CONTROL::SetGridOrigin( GetGalCanvas()->GetView(), this,
new KIGFX::ORIGIN_VIEWITEM( GetGridOrigin(), UR_TRANSIENT ),
wxPoint( 0, 0 ) );
m_canvas->Refresh();
break;
case HK_SWITCH_UNITS:
evt_type = (GetUserUnits() == INCHES) ?
ID_TB_OPTIONS_SELECT_UNIT_MM : ID_TB_OPTIONS_SELECT_UNIT_INCH;
break;
case HK_SWITCH_TRACK_DISPLAY_MODE:
displ_opts->m_DisplayPcbTrackFill = !displ_opts->m_DisplayPcbTrackFill;
m_canvas->Refresh();
break;
case HK_DELETE:
OnHotkeyDeleteItem( aDC );
break;
case HK_BACK_SPACE:
if( IsCopperLayer( GetActiveLayer() ) )
{
if( !itemCurrentlyEdited )
{
// no track is currently being edited - select a segment and remove it.
// @todo: possibly? pass the HK command code to PcbGeneralLocateAndDisplay()
// so it can restrict its search to specific item types.
BOARD_ITEM * item = PcbGeneralLocateAndDisplay();
// don't let backspace delete modules!!
if( item && item->IsTrack() )
{
Delete_Segment( aDC, (TRACK*) item );
SetCurItem( NULL );
}
OnModify();
}
else if( GetCurItem()->IsTrack() )
{
// then an element is being edited - remove the last segment.
// simple lines for debugger:
TRACK* track = (TRACK*) GetCurItem();
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
}
}
break;
case HK_GET_AND_MOVE_FOOTPRINT:
if( !itemCurrentlyEdited )
evt_type = ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST;
break;
case HK_FIND_ITEM:
if( !itemCurrentlyEdited )
evt_type = ID_FIND_ITEMS;
break;
case HK_OPEN:
if( !itemCurrentlyEdited )
evt_type = ID_LOAD_FILE ;
break;
case HK_SAVE:
if( !itemCurrentlyEdited )
evt_type = ID_SAVE_BOARD;
break;
case HK_ADD_MICROVIA: // Place a micro via if a track is in progress
if( GetToolId() != ID_TRACK_BUTT )
return true;
if( !itemCurrentlyEdited ) // no track in progress: nothing to do
break;
if( GetCurItem()->Type() != PCB_TRACE_T ) // Should not occur
return true;
if( !GetCurItem()->IsNew() )
return true;
// place micro via and switch layer
if( IsMicroViaAcceptable() )
evt_type = ID_POPUP_PCB_PLACE_MICROVIA;
break;
case HK_ADD_BLIND_BURIED_VIA:
case HK_ADD_THROUGH_VIA: // Switch to alternate layer and Place a via if a track is in progress
if( GetBoard()->GetDesignSettings().m_BlindBuriedViaAllowed &&
hk_id == HK_ADD_BLIND_BURIED_VIA )
GetBoard()->GetDesignSettings().m_CurrentViaType = VIA_BLIND_BURIED;
else
GetBoard()->GetDesignSettings().m_CurrentViaType = VIA_THROUGH;
if( !itemCurrentlyEdited ) // no track in progress: switch layer only
{
Other_Layer_Route( NULL, aDC );
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
break;
}
if( GetToolId() != ID_TRACK_BUTT )
return true;
if( GetCurItem()->Type() != PCB_TRACE_T )
return true;
if( !GetCurItem()->IsNew() )
return true;
evt_type = hk_id == HK_ADD_BLIND_BURIED_VIA ?
ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA : ID_POPUP_PCB_PLACE_THROUGH_VIA;
break;
case HK_SEL_LAYER_AND_ADD_THROUGH_VIA:
case HK_SEL_LAYER_AND_ADD_BLIND_BURIED_VIA:
if( GetCurItem() == NULL || !GetCurItem()->IsNew() ||
GetCurItem()->Type() != PCB_TRACE_T )
break;
evt_type = hk_id == HK_SEL_LAYER_AND_ADD_BLIND_BURIED_VIA ?
ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA :
ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA;
break;
case HK_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
*/
evt_type = ID_POPUP_PCB_SWITCH_TRACK_POSTURE ;
break;
case HK_DRAG_TRACK_KEEP_SLOPE:
OnHotkeyMoveItem( HK_DRAG_TRACK_KEEP_SLOPE );
break;
case HK_PLACE_ITEM:
OnHotkeyPlaceItem( aDC );
break;
case HK_ADD_NEW_TRACK: // Start new track, if possible
OnHotkeyBeginRoute( aDC );
break;
case HK_EDIT_ITEM: // Edit board item
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
case HK_EDIT_MODULE_WITH_MODEDIT: // Edit module with module editor
OnHotkeyEditItem( HK_EDIT_MODULE_WITH_MODEDIT );
break;
case HK_LOCK_UNLOCK_FOOTPRINT: // toggle module "MODULE_is_LOCKED" status:
// get any module, locked or not locked and toggle its locked status
if( !itemCurrentlyEdited )
{
wxPoint pos = RefPos( true );
module = GetBoard()->GetFootprint( pos, screen->m_Active_Layer, true );
}
else if( GetCurItem()->Type() == PCB_MODULE_T )
{
module = (MODULE*) GetCurItem();
}
if( module )
{
SetCurItem( module );
module->SetLocked( !module->IsLocked() );
OnModify();
SetMsgPanel( module );
}
break;
case HK_DRAG_ITEM: // Start drag module or track segment
OnHotkeyMoveItem( HK_DRAG_ITEM );
break;
case HK_MOVE_ITEM: // Start move item
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_COPY_ITEM:
evt_type = OnHotkeyCopyItem();
break;
case HK_ROTATE_ITEM: // Rotation
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
case HK_FLIP_ITEM:
OnHotkeyFlipItem( HK_FLIP_ITEM );
break;
case HK_MOVE_ITEM_EXACT:
case HK_DUPLICATE_ITEM:
case HK_DUPLICATE_ITEM_AND_INCREMENT:
case HK_CREATE_ARRAY:
OnHotkeyDuplicateOrArrayItem( HK_Descr->m_Idcommand );
break;
case HK_SWITCH_HIGHCONTRAST_MODE: // switch to high contrast mode and refresh the canvas
displ_opts->m_ContrastModeDisplay = !displ_opts->m_ContrastModeDisplay;
m_canvas->Refresh();
break;
case HK_CANVAS_CAIRO:
evt_type = ID_MENU_CANVAS_CAIRO;
break;
case HK_CANVAS_OPENGL:
evt_type = ID_MENU_CANVAS_OPENGL;
break;
case HK_CANVAS_LEGACY:
evt_type = ID_MENU_CANVAS_LEGACY;
break;
case HK_ZONE_FILL_OR_REFILL:
evt_type = ID_POPUP_PCB_FILL_ALL_ZONES;
break;
case HK_ZONE_REMOVE_FILLED:
evt_type = ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES;
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
}
return true;
}
/* OnHotKey.
* ** Commands are case insensitive **
* Some commands are relative to the item under the mouse cursor
* aDC = current device context
* aHotkeyCode = hotkey code (ascii or wxWidget code for special keys)
* aPosition The cursor position in logical (drawing) units.
* aItem = NULL or pointer on a EDA_ITEM under the mouse cursor
*/
void PL_EDITOR_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode,
const wxPoint& aPosition, EDA_ITEM* aItem )
{
bool busy = GetScreen()->GetCurItem() != NULL;
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
/* Convert lower to upper case (the usual toupper function has problem with non ascii
* codes like function keys */
if( (aHotkeyCode >= 'a') && (aHotkeyCode <= 'z') )
aHotkeyCode += 'A' - 'a';
EDA_HOTKEY * HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, s_PlEditor_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, s_Common_Hotkey_List );
if( HK_Descr == NULL )
return;
WORKSHEET_DATAITEM* item;
switch( HK_Descr->m_Idcommand )
{
case HK_NOT_FOUND:
return;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, s_PlEditor_Hokeys_Descr );
break;
case HK_UNDO:
case HK_REDO:
if( busy )
break;
cmd.SetId( HK_Descr->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_IN:
cmd.SetId( ID_POPUP_ZOOM_IN );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_OUT:
cmd.SetId( ID_POPUP_ZOOM_OUT );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_REDRAW:
cmd.SetId( ID_ZOOM_REDRAW );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_CENTER:
cmd.SetId( ID_POPUP_ZOOM_CENTER );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_AUTO:
cmd.SetId( ID_ZOOM_PAGE );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_RESET_LOCAL_COORD: // Reset the relative coord
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_SET_GRID_ORIGIN:
SetGridOrigin( GetCrossHairPosition() );
break;
case HK_MOVE_ITEM:
case HK_MOVE_START_POINT:
case HK_MOVE_END_POINT:
case HK_DELETE_ITEM:
if( busy )
break;
if( (item = Locate( aPosition )) == NULL )
break;
// Only rect and lines have a end point.
if( HK_Descr->m_Idcommand == HK_MOVE_END_POINT && !item->HasEndPoint() )
break;
if( m_treePagelayout->GetPageLayoutSelectedItem() != item )
m_treePagelayout->SelectCell( item );
cmd.SetId( HK_Descr->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_PLACE_ITEM:
if( busy )
{
cmd.SetId( HK_Descr->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
}
break;
default:
wxMessageBox( wxT("Unknown hotkey") );
return;
}
}
bool FOOTPRINT_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotKey, const wxPoint& aPosition,
EDA_ITEM* aItem )
{
if( aHotKey == 0 )
return false;
bool blockActive = GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE;
BOARD_ITEM* item = GetCurItem();
bool ItemFree = (item == 0) || (item->GetFlags() == 0);
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
/* Convert lower to upper case (the usual toupper function has problem with non ascii
* codes like function keys */
if( (aHotKey >= 'a') && (aHotKey <= 'z') )
aHotKey += 'A' - 'a';
EDA_HOTKEY* HK_Descr = GetDescriptorFromHotkey( aHotKey, common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotKey, module_edit_Hotkey_List );
if( HK_Descr == NULL )
return false;
switch( HK_Descr->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return false;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Module_Editor_Hokeys_Descr );
break;
case HK_RESET_LOCAL_COORD: // set local (relative) coordinate origin
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_SET_GRID_ORIGIN:
SetGridOrigin( GetCrossHairPosition() );
m_canvas->Refresh();
break;
case HK_RESET_GRID_ORIGIN:
SetGridOrigin( wxPoint(0,0) );
m_canvas->Refresh();
break;
case HK_SWITCH_UNITS:
cmd.SetId( (g_UserUnit == INCHES) ?
ID_TB_OPTIONS_SELECT_UNIT_MM : ID_TB_OPTIONS_SELECT_UNIT_INCH );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_IN:
cmd.SetId( ID_POPUP_ZOOM_IN );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_OUT:
cmd.SetId( ID_POPUP_ZOOM_OUT );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_REDRAW:
cmd.SetId( ID_ZOOM_REDRAW );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_CENTER:
cmd.SetId( ID_POPUP_ZOOM_CENTER );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_UNDO:
case HK_REDO:
if( ItemFree && !blockActive )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED, HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_ZOOM_AUTO:
cmd.SetId( ID_ZOOM_PAGE );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_EDIT_ITEM:
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
case HK_DELETE:
OnHotkeyDeleteItem( HK_DELETE );
break;
case HK_MOVE_ITEM:
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_ROTATE_ITEM:
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
}
return true;
}
bool LIB_VIEW_FRAME::OnHotKey( wxDC* aDC, int aHotKey, const wxPoint& aPosition, EDA_ITEM* aItem )
{
if( aHotKey == 0 )
return false;
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
/* Convert lower to upper case (the usual toupper function has problem with non ascii
* codes like function keys */
if( (aHotKey >= 'a') && (aHotKey <= 'z') )
aHotKey += 'A' - 'a';
EDA_HOTKEY* HK_Descr = GetDescriptorFromHotkey( aHotKey, common_basic_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotKey, viewlib_Hotkey_List );
if( HK_Descr == NULL )
return false;
switch( HK_Descr->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return false;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Viewlib_Hokeys_Descr );
break;
case HK_RESET_LOCAL_COORD: // set local (relative) coordinate origin
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_ZOOM_IN:
cmd.SetId( ID_POPUP_ZOOM_IN );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_OUT:
cmd.SetId( ID_POPUP_ZOOM_OUT );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_REDRAW:
cmd.SetId( ID_ZOOM_REDRAW );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_CENTER:
cmd.SetId( ID_POPUP_ZOOM_CENTER );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_AUTO:
cmd.SetId( ID_ZOOM_PAGE );
GetEventHandler()->ProcessEvent( cmd );
break;
}
return true;
}
bool LIB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotKey, const wxPoint& aPosition, EDA_ITEM* aItem )
{
if( aHotKey == 0 )
return false;
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
/* Convert lower to upper case (the usual toupper function has problem
* with non ascii codes like function keys */
if( (aHotKey >= 'a') && (aHotKey <= 'z') )
aHotKey += 'A' - 'a';
EDA_HOTKEY* hotKey = GetDescriptorFromHotkey( aHotKey, common_Hotkey_List );
if( hotKey == NULL )
hotKey = GetDescriptorFromHotkey( aHotKey, libEdit_Hotkey_List );
if( hotKey == NULL )
return false;
bool itemInEdit = m_drawItem && m_drawItem->InEditMode();
bool blocInProgress = GetScreen()->m_BlockLocate.GetState() != STATE_NO_BLOCK;
switch( hotKey->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return false;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Libedit_Hokeys_Descr );
break;
case HK_RESET_LOCAL_COORD: // Reset the relative coord
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_ZOOM_IN:
case HK_ZOOM_OUT:
case HK_ZOOM_REDRAW:
case HK_ZOOM_CENTER:
case HK_ZOOM_AUTO:
cmd.SetId( hotKey->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_UNDO:
case HK_REDO:
if( !itemInEdit )
{
cmd.SetId( hotKey->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
}
break;
case HK_REPEAT_LAST:
if( ! itemInEdit )
{
if( m_lastDrawItem && !m_lastDrawItem->InEditMode() &&
( m_lastDrawItem->Type() == LIB_PIN_T ) )
RepeatPinItem( aDC, (LIB_PIN*) m_lastDrawItem );
}
break;
case HK_EDIT:
if( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem )
{
switch( m_drawItem->Type() )
{
case LIB_PIN_T:
cmd.SetId( ID_LIBEDIT_EDIT_PIN );
GetEventHandler()->ProcessEvent( cmd );
break;
case LIB_ARC_T:
case LIB_CIRCLE_T:
case LIB_RECTANGLE_T:
case LIB_POLYLINE_T:
case LIB_TEXT_T:
cmd.SetId( ID_POPUP_LIBEDIT_BODY_EDIT_ITEM );
GetEventHandler()->ProcessEvent( cmd );
break;
case LIB_FIELD_T:
cmd.SetId( ID_POPUP_LIBEDIT_FIELD_EDIT_ITEM );
GetEventHandler()->ProcessEvent( cmd );
break;
default:
break;
}
}
break;
case HK_ROTATE:
if( blocInProgress )
{
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
HandleBlockPlace( aDC );
}
else
{
if ( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem )
{
cmd.SetId( ID_LIBEDIT_ROTATE_ITEM );
GetEventHandler()->ProcessEvent( cmd );
}
}
break;
case HK_LIBEDIT_LOAD_PART:
LoadOneLibraryPart( cmd );
break;
case HK_LIBEDIT_CREATE_PIN:
if( ! itemInEdit )
{
SetToolID( ID_LIBEDIT_PIN_BUTT, wxCURSOR_PENCIL, _( "Add Pin" ) );
OnLeftClick( aDC, aPosition );
}
break;
case HK_DELETE:
if( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem && !m_drawItem->InEditMode() )
{
cmd.SetId( ID_POPUP_LIBEDIT_DELETE_ITEM );
Process_Special_Functions( cmd );
}
break;
case HK_LIBEDIT_MOVE_GRAPHIC_ITEM:
if( !itemInEdit )
{
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem )
{
cmd.SetId( ID_POPUP_LIBEDIT_MOVE_ITEM_REQUEST );
Process_Special_Functions( cmd );
}
}
break;
case HK_DRAG:
if( !itemInEdit )
{
m_drawItem = LocateItemUsingCursor( aPosition );
if( m_drawItem && !m_drawItem->InEditMode() )
{
cmd.SetId( ID_POPUP_LIBEDIT_MODIFY_ITEM );
Process_Special_Functions( cmd );
}
}
break;
case HK_MIRROR_Y: // Mirror Y
if( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
cmd.SetId( ID_LIBEDIT_MIRROR_Y );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_MIRROR_X: // Mirror X
if( !itemInEdit )
m_drawItem = LocateItemUsingCursor( aPosition );
cmd.SetId( ID_LIBEDIT_MIRROR_X );
GetEventHandler()->ProcessEvent( cmd );
break;
}
// Hot key handled.
return true;
}
/*
* Hot keys. Some commands are relative to the item under the mouse cursor
* Commands are case insensitive
*/
bool SCH_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotKey, const wxPoint& aPosition, EDA_ITEM* aItem )
{
if( aHotKey == 0 )
return false;
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
SCH_SCREEN* screen = GetScreen();
// itemInEdit == false means no item currently edited. We can ask for editing a new item
bool itemInEdit = screen->GetCurItem() && screen->GetCurItem()->GetFlags();
// blocInProgress == false means no block in progress.
// Because a drag command uses a drag block, false means also no drag in progress
// If false, we can ask for editing a new item
bool blocInProgress = screen->m_BlockLocate.GetState() != STATE_NO_BLOCK;
// notBusy == true means no item currently edited and no other command in progress
// We can change active tool and ask for editing a new item
bool notBusy = (!itemInEdit) && (!blocInProgress);
/* Convert lower to upper case (the usual toupper function has problem
* with non ascii codes like function keys */
if( (aHotKey >= 'a') && (aHotKey <= 'z') )
aHotKey += 'A' - 'a';
// Search command from key :
EDA_HOTKEY* hotKey = GetDescriptorFromHotkey( aHotKey, common_Hotkey_List );
if( hotKey == NULL )
hotKey = GetDescriptorFromHotkey( aHotKey, schematic_Hotkey_List );
if( hotKey == NULL )
return false;
switch( hotKey->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return false;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Schematic_Hokeys_Descr );
break;
case HK_RESET_LOCAL_COORD: // Reset the relative coord
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case ID_HOTKEY_HIGHLIGHT:
if( notBusy )
HighlightConnectionAtPosition( GetCrossHairPosition() );
break;
case HK_LEFT_CLICK:
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
if( screen->m_BlockLocate.GetState() == STATE_BLOCK_MOVE )
{
GetCanvas()->SetAutoPanRequest( false );
HandleBlockPlace( aDC );
}
else if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
{
OnLeftClick( aDC, aPosition );
if( hotKey->m_Idcommand == HK_LEFT_DCLICK )
OnLeftDClick( aDC, aPosition );
}
break;
case HK_ZOOM_IN:
case HK_ZOOM_OUT:
case HK_ZOOM_REDRAW:
case HK_ZOOM_CENTER:
case HK_ZOOM_AUTO:
case HK_ZOOM_SELECTION:
case HK_MOVEBLOCK_TO_DRAGBLOCK: // Switch to drag mode, when block moving
case HK_SAVE_BLOCK: // Copy block to paste buffer.
cmd.SetId( hotKey->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_DELETE:
if( notBusy )
DeleteItemAtCrossHair( aDC );
break;
case HK_REPEAT_LAST:
if( notBusy )
RepeatDrawItem( aDC );
break;
case HK_END_CURR_LINEWIREBUS:
// this key terminates a new line/bus/wire in progress
if( aItem && aItem->IsNew() &&
aItem->Type() == SCH_LINE_T )
{
cmd.SetId( hotKey->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
}
break;
case HK_UNDO: // Hot keys that map to command IDs that cannot be called
case HK_REDO: // while busy performing another command.
case HK_FIND_ITEM:
case HK_FIND_REPLACE:
case HK_DELETE_NODE:
case HK_LEAVE_SHEET:
if( notBusy )
{
cmd.SetId( hotKey->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
}
break;
case HK_FIND_NEXT_ITEM:
case HK_FIND_NEXT_DRC_MARKER:
if( notBusy )
{
wxFindDialogEvent event( hotKey->m_IdMenuEvent, GetId() );
event.SetEventObject( this );
event.SetFlags( m_findReplaceData->GetFlags() );
event.SetFindString( m_findReplaceData->GetFindString() );
GetEventHandler()->ProcessEvent( event );
}
break;
case HK_ADD_NEW_COMPONENT: // Add component
case HK_ADD_NEW_POWER: // Add power component
case HK_ADD_LABEL:
case HK_ADD_HLABEL:
case HK_ADD_GLABEL:
case HK_ADD_JUNCTION:
case HK_ADD_WIRE_ENTRY:
case HK_ADD_BUS_ENTRY:
case HK_ADD_HIER_SHEET:
case HK_ADD_GRAPHIC_TEXT:
case HK_ADD_GRAPHIC_POLYLINE:
case HK_ADD_NOCONN_FLAG: // Add a no connected flag
case HK_BEGIN_BUS:
case HK_BEGIN_WIRE:
if( notBusy )
{
EDA_HOTKEY_CLIENT_DATA data( aPosition );
cmd.SetInt( aHotKey );
cmd.SetClientObject( &data );
cmd.SetId( hotKey->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
}
else if( aItem && aItem->IsNew() )
{
// If the item is a bus or a wire, a begin command is not possible.
if( (GetToolId() == ID_BUS_BUTT) && (aItem->Type() == SCH_LINE_T) )
{
SCH_LINE* segment = (SCH_LINE*) aItem;
if( segment->GetLayer() != LAYER_BUS )
break;
// Bus in progress:
OnLeftClick( aDC, aPosition );
}
else if( (GetToolId() == ID_WIRE_BUTT ) && (aItem->Type() == SCH_LINE_T) )
{
SCH_LINE* segment = (SCH_LINE*) aItem;
if( segment->GetLayer() != LAYER_WIRE )
break;
// Wire in progress:
OnLeftClick( aDC, aPosition );
}
}
break;
case HK_COPY_COMPONENT_OR_LABEL: // Duplicate component or text/label
if( itemInEdit )
break;
if( aItem == NULL )
{
aItem = LocateAndShowItem( aPosition, SCH_COLLECTOR::CopyableItems );
if( aItem == NULL )
break;
}
cmd.SetId( hotKey->m_IdMenuEvent );
wxPostEvent( this, cmd );
break;
case HK_DRAG: // Start drag
case HK_MOVE_COMPONENT_OR_ITEM: // Start move schematic item.
if( ! notBusy )
break;
// Fall through
case HK_EDIT:
// Edit schematic item. Do not allow sheet edition when mowing
// Because a sheet edition can be complex.
if( itemInEdit && screen->GetCurItem()->Type() == SCH_SHEET_T )
break;
// Fall through
case HK_EDIT_COMPONENT_VALUE: // Edit component value field.
case HK_EDIT_COMPONENT_REFERENCE: // Edit component value reference.
case HK_EDIT_COMPONENT_FOOTPRINT: // Edit component footprint field.
case HK_MIRROR_Y: // Mirror Y
case HK_MIRROR_X: // Mirror X
case HK_ORIENT_NORMAL_COMPONENT: // Orient 0, no mirror (Component)
case HK_ROTATE: // Rotate schematic item.
case HK_EDIT_COMPONENT_WITH_LIBEDIT: // Call Libedit and load the current component
case HK_AUTOPLACE_FIELDS: // Autoplace all fields around component
{
// force a new item search on hot keys at current position,
// if there is no currently edited item,
// to avoid using a previously selected item
if( ! itemInEdit )
screen->SetCurItem( NULL );
EDA_HOTKEY_CLIENT_DATA data( aPosition );
cmd.SetInt( hotKey->m_Idcommand );
cmd.SetClientObject( &data );
cmd.SetId( hotKey->m_IdMenuEvent );
GetEventHandler()->ProcessEvent( cmd );
}
break;
}
// Hot key handled.
return true;
}
