/*
==========================================================================
Description:
mlme assoc req handling procedure
Parameters:
Adapter - Adapter pointer
Elem - MLME Queue Element
Pre:
the station has been authenticated and the following information is stored in the config
-# SSID
-# supported rates and their length
-# listen interval (Adapter->PortCfg.default_listen_count)
-# Transmit power (Adapter->PortCfg.tx_power)
Post :
-# An association request frame is generated and sent to the air
-# Association timer starts
-# Association state -> ASSOC_WAIT_RSP
==========================================================================
*/
static VOID ApCliMlmeAssocReqAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
NDIS_STATUS NStatus;
BOOLEAN Cancelled;
UCHAR ApAddr[6];
HEADER_802_11 AssocHdr;
UCHAR WmeIe[9] = {IE_VENDOR_SPECIFIC, 0x07, 0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00};
USHORT ListenIntv;
ULONG Timeout;
USHORT CapabilityInfo;
PUCHAR pOutBuffer = NULL;
ULONG FrameLen = 0;
ULONG tmp;
UCHAR SsidIe = IE_SSID;
UCHAR SupRateIe = IE_SUPP_RATES;
UCHAR ExtRateIe = IE_EXT_SUPP_RATES;
APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
USHORT ifIndex = (USHORT)(Elem->Priv);
PULONG pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].AssocCurrState;
if (ifIndex >= MAX_APCLI_NUM)
return;
/* Block all authentication request durning WPA block period */
if (pAd->ApCfg.ApCliTab[ifIndex].bBlockAssoc == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - Block Auth request durning WPA block period!\n"));
*pCurrState = APCLI_ASSOC_IDLE;
ApCliCtrlMsg.Status = MLME_STATE_MACHINE_REJECT;
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_ASSOC_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
}
else if(MlmeAssocReqSanity(pAd, Elem->Msg, Elem->MsgLen, ApAddr, &CapabilityInfo, &Timeout, &ListenIntv))
{
RTMPCancelTimer(&pAd->ApCliMlmeAux.ApCliAssocTimer, &Cancelled);
/* allocate and send out AssocRsp frame */
NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - ApCliMlmeAssocReqAction() allocate memory failed \n"));
*pCurrState = APCLI_ASSOC_IDLE;
ApCliCtrlMsg.Status = MLME_FAIL_NO_RESOURCE;
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_ASSOC_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
return;
}
DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - Send ASSOC request...\n"));
ApCliMgtMacHeaderInit(pAd, &AssocHdr, SUBTYPE_ASSOC_REQ, 0, ApAddr, ApAddr, ifIndex);
/* Build basic frame first */
MakeOutgoingFrame(pOutBuffer, &FrameLen,
sizeof(HEADER_802_11), &AssocHdr,
2, &CapabilityInfo,
2, &ListenIntv,
1, &SsidIe,
1, &pAd->ApCliMlmeAux.SsidLen,
pAd->ApCliMlmeAux.SsidLen, pAd->ApCliMlmeAux.Ssid,
1, &SupRateIe,
1, &pAd->ApCliMlmeAux.SupRateLen,
pAd->ApCliMlmeAux.SupRateLen, pAd->ApCliMlmeAux.SupRate,
END_OF_ARGS);
if(pAd->ApCliMlmeAux.ExtRateLen != 0)
{
MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
1, &ExtRateIe,
1, &pAd->ApCliMlmeAux.ExtRateLen,
pAd->ApCliMlmeAux.ExtRateLen, pAd->ApCliMlmeAux.ExtRate,
END_OF_ARGS);
FrameLen += tmp;
}
#ifdef DOT11_N_SUPPORT
/* HT */
if ((pAd->ApCliMlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
{
ULONG TmpLen;
//UCHAR HtLen; */
//UCHAR BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33}; */
/* 2008/12/17:KH modified to fix the low throughput of AP-Client on Big-Endian Platform<-- */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
#endif
#ifndef RT_BIG_ENDIAN
{
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &HtCapIe,
1, &pAd->ApCliMlmeAux.HtCapabilityLen,
pAd->ApCliMlmeAux.HtCapabilityLen, &pAd->ApCliMlmeAux.HtCapability,
END_OF_ARGS);
}
#else
NdisZeroMemory(&HtCapabilityTmp, sizeof(HT_CAPABILITY_IE));
NdisMoveMemory(&HtCapabilityTmp, &pAd->ApCliMlmeAux.HtCapability, pAd->ApCliMlmeAux.HtCapabilityLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &HtCapIe,
1, &pAd->ApCliMlmeAux.HtCapabilityLen,
pAd->ApCliMlmeAux.HtCapabilityLen,&HtCapabilityTmp,
END_OF_ARGS);
#endif
/* 2008/12/17:KH modified to fix the low throughput of AP-Client on Big-Endian Platform--> */
FrameLen += TmpLen;
}
#endif /* DOT11_N_SUPPORT */
#ifdef AGGREGATION_SUPPORT
/* add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION */
/* Case I: (Aggregation + Piggy-Back) */
/* 1. user enable aggregation, AND */
/* 2. Mac support piggy-back */
/* 3. AP annouces it's PIGGY-BACK+AGGREGATION-capable in BEACON */
/* Case II: (Aggregation) */
/* 1. user enable aggregation, AND */
/* 2. AP annouces it's AGGREGATION-capable in BEACON */
if (pAd->CommonCfg.bAggregationCapable)
{
#ifdef PIGGYBACK_SUPPORT
if ((pAd->CommonCfg.bPiggyBackCapable) && ((pAd->ApCliMlmeAux.APRalinkIe & 0x00000003) == 3))
{
ULONG TmpLen;
UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x03, 0x00, 0x00, 0x00};
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
9, RalinkIe,
END_OF_ARGS);
FrameLen += TmpLen;
} else
#endif /* PIGGYBACK_SUPPORT */
if (pAd->ApCliMlmeAux.APRalinkIe & 0x00000001)
{
ULONG TmpLen;
UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x01, 0x00, 0x00, 0x00};
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
9, RalinkIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
else
{
ULONG TmpLen;
UCHAR RalinkIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x06, 0x00, 0x00, 0x00};
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
9, RalinkIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* AGGREGATION_SUPPORT */
if (pAd->ApCliMlmeAux.APEdcaParm.bValid)
{
if (pAd->CommonCfg.bAPSDCapable && pAd->ApCliMlmeAux.APEdcaParm.bAPSDCapable)
{
QBSS_STA_INFO_PARM QosInfo;
NdisZeroMemory(&QosInfo, sizeof(QBSS_STA_INFO_PARM));
QosInfo.UAPSD_AC_BE = pAd->CommonCfg.bAPSDAC_BE;
QosInfo.UAPSD_AC_BK = pAd->CommonCfg.bAPSDAC_BK;
QosInfo.UAPSD_AC_VI = pAd->CommonCfg.bAPSDAC_VI;
QosInfo.UAPSD_AC_VO = pAd->CommonCfg.bAPSDAC_VO;
QosInfo.MaxSPLength = pAd->CommonCfg.MaxSPLength;
WmeIe[8] |= *(PUCHAR)&QosInfo;
}
else
{
/* The Parameter Set Count is set to бз0би in the association request frames */
/* WmeIe[8] |= (pAd->MlmeAux.APEdcaParm.EdcaUpdateCount & 0x0f); */
}
MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
9, &WmeIe[0],
END_OF_ARGS);
FrameLen += tmp;
}
/* Append RSN_IE when WPAPSK OR WPA2PSK, */
if (((pAd->ApCfg.ApCliTab[ifIndex].AuthMode == Ndis802_11AuthModeWPAPSK) ||
(pAd->ApCfg.ApCliTab[ifIndex].AuthMode == Ndis802_11AuthModeWPA2PSK))
#ifdef WSC_AP_SUPPORT
&& (pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode == WSC_DISABLE)
#endif /* WSC_AP_SUPPORT */
)
{
UCHAR RSNIe = IE_WPA;
if (pAd->ApCfg.ApCliTab[ifIndex].AuthMode == Ndis802_11AuthModeWPA2PSK)
RSNIe = IE_WPA2;
MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
1, &RSNIe,
1, &pAd->ApCfg.ApCliTab[ifIndex].RSNIE_Len,
pAd->ApCfg.ApCliTab[ifIndex].RSNIE_Len, pAd->ApCfg.ApCliTab[ifIndex].RSN_IE,
END_OF_ARGS);
FrameLen += tmp;
}
#ifdef P2P_SUPPORT
if (P2P_CLI_ON(pAd))
{
ULONG TmpLen;
PUCHAR pData;
pData = pOutBuffer + FrameLen;
P2pMakeP2pIE(pAd, SUBTYPE_ASSOC_REQ, pData, &TmpLen);
FrameLen += TmpLen;
DBGPRINT(RT_DEBUG_TRACE, ("ASSOC RSP - Insert P2P IE \n"));
}
#endif /* P2P_SUPPORT */
MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer);
RTMPSetTimer(&pAd->ApCliMlmeAux.ApCliAssocTimer, Timeout);
*pCurrState = APCLI_ASSOC_WAIT_RSP;
}
else
{
DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - ApCliMlmeAssocReqAction() sanity check failed. BUG!!!!!! \n"));
*pCurrState = APCLI_ASSOC_IDLE;
ApCliCtrlMsg.Status = MLME_INVALID_FORMAT;
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_ASSOC_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
}
return;
}
static INT scan_active(RTMP_ADAPTER *pAd, UCHAR OpMode, UCHAR ScanType)
{
UCHAR *frm_buf = NULL;
HEADER_802_11 Hdr80211;
ULONG FrameLen = 0;
UCHAR SsidLen = 0;
#ifdef CONFIG_STA_SUPPORT
USHORT Status;
#endif /* CONFIG_STA_SUPPORT */
if (MlmeAllocateMemory(pAd, &frm_buf) != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
#ifdef CONFIG_STA_SUPPORT
if (OpMode == OPMODE_STA)
{
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
Status = MLME_FAIL_NO_RESOURCE;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status, 0);
}
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
if (OpMode == OPMODE_AP)
pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE;
#endif /* CONFIG_AP_SUPPORT */
return FALSE;
}
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
if (ScanType == SCAN_2040_BSS_COEXIST)
{
DBGPRINT(RT_DEBUG_INFO, ("SYNC - SCAN_2040_BSS_COEXIST !! Prepare to send Probe Request\n"));
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
/* There is no need to send broadcast probe request if active scan is in effect.*/
SsidLen = 0;
if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE)
#ifdef WSC_STA_SUPPORT
|| ((ScanType == SCAN_WSC_ACTIVE) && (OpMode == OPMODE_STA))
#endif /* WSC_STA_SUPPORT */
)
SsidLen = pAd->MlmeAux.SsidLen;
#ifdef P2P_SUPPORT
if ((pAd->MlmeAux.ScanType == SCAN_P2P) || (pAd->MlmeAux.ScanType == SCAN_P2P_SEARCH)
#ifdef P2P_APCLI_SUPPORT
|| ((pAd->MlmeAux.ScanType == SCAN_WSC_ACTIVE) && (OpMode == OPMODE_AP) && (P2P_CLI_ON(pAd)))
#endif /* P2P_APCLI_SUPPORT */
)
{
PRT_P2P_CONFIG pP2PCtrl = &pAd->P2pCfg;
UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR SupRateLen = 0;
SsidLen = WILDP2PSSIDLEN; /* Use Wildword SSID */
SupRate[0] = 0x8C; /* 6 mbps, in units of 0.5 Mbps, basic rate */
SupRate[1] = 0x12; /* 9 mbps, in units of 0.5 Mbps */
SupRate[2] = 0x98; /* 12 mbps, in units of 0.5 Mbps, basic rate */
SupRate[3] = 0x24; /* 18 mbps, in units of 0.5 Mbps */
SupRate[4] = 0xb0; /* 24 mbps, in units of 0.5 Mbps, basic rate */
SupRate[5] = 0x48; /* 36 mbps, in units of 0.5 Mbps */
SupRate[6] = 0x60; /* 48 mbps, in units of 0.5 Mbps */
SupRate[7] = 0x6c; /* 54 mbps, in units of 0.5 Mbps */
SupRateLen = 8;
/* P2P scan must use P2P mac address. */
MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR,
pP2PCtrl->CurrentAddress,
BROADCAST_ADDR);
MakeOutgoingFrame(frm_buf, &FrameLen,
sizeof(HEADER_802_11), &Hdr80211,
1, &SsidIe,
1, &SsidLen,
SsidLen, &WILDP2PSSID[0],
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, SupRate,
END_OF_ARGS);
}
else
#endif /* P2P_SUPPORT */
{
#ifdef CONFIG_AP_SUPPORT
/*IF_DEV_CONFIG_OPMODE_ON_AP(pAd) */
if (OpMode == OPMODE_AP)
{
MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR,
#ifdef P2P_SUPPORT
pAd->ApCfg.MBSSID[0].Bssid,
#endif /* P2P_SUPPORT */
pAd->ApCfg.MBSSID[0].Bssid);
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
/*IF_DEV_CONFIG_OPMODE_ON_STA(pAd) */
if (OpMode == OPMODE_STA)
{
MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR,
#ifdef P2P_SUPPORT
pAd->CurrentAddress,
#endif /* P2P_SUPPORT */
BROADCAST_ADDR);
}
#endif /* CONFIG_STA_SUPPORT */
MakeOutgoingFrame(frm_buf, &FrameLen,
sizeof(HEADER_802_11), &Hdr80211,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->MlmeAux.Ssid,
1, &SupRateIe,
1, &pAd->CommonCfg.SupRateLen,
pAd->CommonCfg.SupRateLen, pAd->CommonCfg.SupRate,
END_OF_ARGS);
if (pAd->CommonCfg.ExtRateLen)
{
ULONG Tmp;
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += Tmp;
}
}
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(pAd->CommonCfg.PhyMode))
{
ULONG Tmp;
UCHAR HtLen;
UCHAR BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
#endif
if (pAd->bBroadComHT == TRUE)
{
HtLen = pAd->MlmeAux.HtCapabilityLen + 4;
#ifdef RT_BIG_ENDIAN
NdisMoveMemory(&HtCapabilityTmp, &pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = cpu2le16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &WpaIe,
1, &HtLen,
4, &BROADCOM[0],
pAd->MlmeAux.HtCapabilityLen, &HtCapabilityTmp,
END_OF_ARGS);
#else
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &WpaIe,
1, &HtLen,
4, &BROADCOM[0],
pAd->MlmeAux.HtCapabilityLen, &pAd->MlmeAux.HtCapability,
END_OF_ARGS);
#endif /* RT_BIG_ENDIAN */
}
else
{
HtLen = sizeof(HT_CAPABILITY_IE);
#ifdef RT_BIG_ENDIAN
NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, SIZE_HT_CAP_IE);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = cpu2le16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#else
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &HtCapIe,
1, &HtLen,
HtLen, &pAd->CommonCfg.HtCapability,
END_OF_ARGS);
#endif /* RT_BIG_ENDIAN */
}
FrameLen += Tmp;
#ifdef DOT11N_DRAFT3
if ((pAd->MlmeAux.Channel <= 14) && (pAd->CommonCfg.bBssCoexEnable == TRUE))
{
ULONG Tmp;
HtLen = 1;
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &ExtHtCapIe,
1, &HtLen,
1, &pAd->CommonCfg.BSSCoexist2040.word,
END_OF_ARGS);
FrameLen += Tmp;
}
#endif /* DOT11N_DRAFT3 */
}
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(pAd->CommonCfg.PhyMode) &&
(pAd->MlmeAux.Channel > 14)) {
FrameLen += build_vht_ies(pAd, (UCHAR *)(frm_buf + FrameLen), SUBTYPE_PROBE_REQ);
}
#endif /* DOT11_VHT_AC */
#ifdef WSC_STA_SUPPORT
if (OpMode == OPMODE_STA)
{
BOOLEAN bHasWscIe = FALSE;
/*
Append WSC information in probe request if WSC state is running
*/
if ((pAd->StaCfg.WscControl.WscEnProbeReqIE) &&
(pAd->StaCfg.WscControl.WscConfMode != WSC_DISABLE) &&
(pAd->StaCfg.WscControl.bWscTrigger == TRUE))
bHasWscIe = TRUE;
#ifdef WSC_V2_SUPPORT
else if ((pAd->StaCfg.WscControl.WscEnProbeReqIE) &&
(pAd->StaCfg.WscControl.WscV2Info.bEnableWpsV2))
bHasWscIe = TRUE;
#endif /* WSC_V2_SUPPORT */
#ifdef P2P_SUPPORT
/*
P2pMakeProbeReqIE will build WSC IE for P2P,
it is not good to append normal WSC IE into P2P probe request frame here.
*/
if ((pAd->MlmeAux.ScanType == SCAN_P2P) || (pAd->MlmeAux.ScanType == SCAN_P2P_SEARCH) ||
((pAd->MlmeAux.ScanType == SCAN_WSC_ACTIVE) && (OpMode == OPMODE_AP) && (P2P_CLI_ON(pAd))))
bHasWscIe = FALSE;
#endif /* P2P_SUPPORT */
if (bHasWscIe)
{
UCHAR *pWscBuf = NULL, WscIeLen = 0;
ULONG WscTmpLen = 0;
os_alloc_mem(NULL, (UCHAR **)&pWscBuf, 512);
if (pWscBuf != NULL)
{
NdisZeroMemory(pWscBuf, 512);
WscBuildProbeReqIE(pAd, STA_MODE, pWscBuf, &WscIeLen);
MakeOutgoingFrame(frm_buf + FrameLen, &WscTmpLen,
WscIeLen, pWscBuf,
END_OF_ARGS);
FrameLen += WscTmpLen;
os_free_mem(NULL, pWscBuf);
}
else
DBGPRINT(RT_DEBUG_WARN, ("%s:: WscBuf Allocate failed!\n", __FUNCTION__));
}
}
#endif /* WSC_STA_SUPPORT */
#ifdef WPA_SUPPLICANT_SUPPORT
if ((OpMode == OPMODE_STA) &&
(pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
(pAd->StaCfg.WpsProbeReqIeLen != 0))
{
ULONG WpsTmpLen = 0;
MakeOutgoingFrame(frm_buf + FrameLen, &WpsTmpLen,
pAd->StaCfg.WpsProbeReqIeLen, pAd->StaCfg.pWpsProbeReqIe,
END_OF_ARGS);
FrameLen += WpsTmpLen;
}
#endif /* WPA_SUPPLICANT_SUPPORT */
#ifdef P2P_SUPPORT
if ((pAd->MlmeAux.ScanType == SCAN_P2P) || (pAd->MlmeAux.ScanType == SCAN_P2P_SEARCH)
#ifdef P2P_APCLI_SUPPORT
|| ((pAd->MlmeAux.ScanType == SCAN_WSC_ACTIVE) && (OpMode == OPMODE_AP) && (P2P_CLI_ON(pAd)))
#endif /* P2P_APCLI_SUPPORT */
)
{
ULONG P2PIeLen;
UCHAR tmp_len;
PUCHAR ptr;
ptr = frm_buf + FrameLen;
P2pMakeProbeReqIE(pAd, ptr, &tmp_len);
FrameLen += tmp_len;
/* Put P2P IE to the last. */
ptr = frm_buf + FrameLen;
P2pMakeP2pIE(pAd, SUBTYPE_PROBE_REQ, ptr, &P2PIeLen);
FrameLen += P2PIeLen;
}
#endif /* P2P_SUPPORT */
MiniportMMRequest(pAd, 0, frm_buf, FrameLen);
#ifdef CONFIG_STA_SUPPORT
if (OpMode == OPMODE_STA)
{
/*
To prevent data lost.
Send an NULL data with turned PSM bit on to current associated AP when SCAN in the channel where
associated AP located.
*/
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) &&
(INFRA_ON(pAd)) &&
(pAd->CommonCfg.Channel == pAd->MlmeAux.Channel))
{
RTMPSendNullFrame(pAd,
pAd->CommonCfg.TxRate,
(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) ? TRUE:FALSE),
PWR_SAVE);
DBGPRINT(RT_DEBUG_TRACE, ("ScanNextChannel():Send PWA NullData frame to notify the associated AP!\n"));
}
}
#if 0//def RT_CFG80211_SUPPORT
if (pAd->ApCfg.ApCliTab[MAIN_MBSSID].Valid && RTMP_CFG80211_VIF_P2P_CLI_ON(pAd)
&& (pAd->CommonCfg.Channel == pAd->MlmeAux.Channel))
{
DBGPRINT(RT_DEBUG_TRACE, ("CFG80211_NULL: PWR_SAVE SCANNING\n"));
RT_CFG80211_P2P_CLI_SEND_NULL_FRAME(pAd, PWR_SAVE);
}
#endif /* RT_CFG80211_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */
MlmeFreeMemory(pAd, frm_buf);
return TRUE;
}
/*
==========================================================================
Description:
==========================================================================
*/
static VOID ApCliEnqueueProbeRequest(
IN PRTMP_ADAPTER pAd,
IN UCHAR SsidLen,
OUT PCHAR Ssid,
IN USHORT ifIndex)
{
NDIS_STATUS NState;
PUCHAR pOutBuffer;
ULONG FrameLen = 0;
HEADER_802_11 Hdr80211;
UCHAR SsidIe = IE_SSID;
UCHAR SupRateIe = IE_SUPP_RATES;
UCHAR ssidLen;
CHAR ssid[MAX_LEN_OF_SSID];
PUCHAR ptr;
ULONG TmpLen;
DBGPRINT(RT_DEBUG_TRACE, ("force out a ProbeRequest ...\n"));
NState = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory */
if(NState != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_TRACE, ("EnqueueProbeRequest() allocate memory fail\n"));
return;
}
else
{
if(MAC_ADDR_EQUAL(pAd->ApCfg.ApCliTab[ifIndex].CfgApCliBssid, ZERO_MAC_ADDR))
ApCliMgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0,
BROADCAST_ADDR, BROADCAST_ADDR, ifIndex);
else
ApCliMgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0,
pAd->ApCfg.ApCliTab[ifIndex].CfgApCliBssid, pAd->ApCfg.ApCliTab[ifIndex].CfgApCliBssid, ifIndex);
ssidLen = SsidLen;
NdisZeroMemory(ssid, MAX_LEN_OF_SSID);
NdisMoveMemory(ssid, Ssid, ssidLen);
/* this ProbeRequest explicitly specify SSID to reduce unwanted ProbeResponse */
MakeOutgoingFrame(pOutBuffer, &FrameLen,
sizeof(HEADER_802_11), &Hdr80211,
1, &SsidIe,
1, &ssidLen,
ssidLen, ssid,
1, &SupRateIe,
1, &pAd->ApCliMlmeAux.SupRateLen,
pAd->ApCliMlmeAux.SupRateLen, pAd->ApCliMlmeAux.SupRate,
END_OF_ARGS);
/* Add the extended rate IE */
if (pAd->ApCliMlmeAux.ExtRateLen != 0)
{
ULONG tmp;
MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
1, &ExtRateIe,
1, &pAd->ApCliMlmeAux.ExtRateLen,
pAd->ApCliMlmeAux.ExtRateLen, pAd->ApCliMlmeAux.ExtRate,
END_OF_ARGS);
FrameLen += tmp;
}
P2pMakeProbeRspWSCIE(pAd, pOutBuffer + FrameLen, &TmpLen);
FrameLen += TmpLen;
ptr = pOutBuffer + FrameLen;
P2pMakeP2pIE(pAd, SUBTYPE_PROBE_REQ, ptr, &TmpLen);
FrameLen += TmpLen;
MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer);
}
return;
}
