bool FOOTPRINT_EDIT_FRAME::SaveFootprint( MODULE* aModule )
{
wxString libraryName = aModule->GetFPID().GetLibNickname();
wxString footprintName = aModule->GetFPID().GetLibItemName();
bool nameChanged = m_footprintNameWhenLoaded != footprintName;
if( aModule->GetLink() )
{
if( SaveFootprintToBoard( false ) )
{
m_footprintNameWhenLoaded = footprintName;
return true;
}
else
return false;
}
else if( libraryName.IsEmpty() || footprintName.IsEmpty() )
{
if( SaveFootprintAs( aModule ) )
{
m_footprintNameWhenLoaded = footprintName;
SyncLibraryTree( true );
return true;
}
else
return false;
}
FP_LIB_TABLE* tbl = Prj().PcbFootprintLibs();
// Legacy libraries are readable, but modifying legacy format is not allowed
// So prompt the user if he try to add/replace a footprint in a legacy lib
wxString libfullname = tbl->FindRow( libraryName )->GetFullURI();
if( IO_MGR::GuessPluginTypeFromLibPath( libfullname ) == IO_MGR::LEGACY )
{
DisplayInfoMessage( this, INFO_LEGACY_LIB_WARN_EDIT );
return false;
}
if( nameChanged )
{
LIB_ID oldFPID( libraryName, m_footprintNameWhenLoaded );
DeleteModuleFromLibrary( oldFPID, false );
}
if( !saveFootprintInLibrary( aModule, libraryName ) )
return false;
if( nameChanged )
{
m_footprintNameWhenLoaded = footprintName;
SyncLibraryTree( true );
}
return true;
}
void DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnTestChipName( wxCommandEvent& event )
{
wxString partname = chipnameTextCtrl->GetValue();
LIB_PART* entry = Prj().SchLibs()->FindLibPart( partname );
wxString msg;
if( entry )
{
msg.Printf( _( "Component '%s' found in library '%s'" ),
GetChars( partname ), GetChars( entry->GetLibraryName() ) );
wxMessageBox( msg );
return;
}
msg.Printf( _( "Component '%s' not found in any library" ), GetChars( partname ) );
// Try to find components which have a name "near" the current chip name,
// i.e. the same name when the comparison is case insensitive.
// Could be helpful for old designs when lower cases and upper case were
// equivalent.
std::vector<LIB_ALIAS*> candidates;
Prj().SchLibs()->FindLibraryNearEntries( candidates, partname );
if( candidates.size() == 0 )
{
wxMessageBox( msg );
return;
}
// Some candidates are found. Show them:
msg << wxT("\n") << _( "However, some candidates are found:" );
// add candidate names:
for( unsigned ii = 0; ii < candidates.size(); ii++ )
{
msg << wxT("\n") <<
wxString::Format( _( "'%s' found in library '%s'" ),
GetChars( candidates[ii]->GetName() ),
GetChars( candidates[ii]->GetLibraryName() ) );
}
wxMessageBox( msg );
}
void KICAD_MANAGER_FRAME::SetProjectFileName( const wxString& aFullProjectProFileName )
{
// ensure file name is absolute:
wxFileName fn( aFullProjectProFileName );
if( !fn.IsAbsolute() )
fn.MakeAbsolute();
Prj().SetProjectFullName( fn.GetFullPath() );
}
bool DIALOG_SYMBOL_REMAP::remapSymbolToLibTable( SCH_COMPONENT* aSymbol )
{
wxCHECK_MSG( aSymbol != NULL, false, "Null pointer passed to remapSymbolToLibTable." );
wxCHECK_MSG( aSymbol->GetLibId().GetLibNickname().empty(), false,
"Cannot remap symbol that is already mapped." );
wxCHECK_MSG( !aSymbol->GetLibId().GetLibItemName().empty(), false,
"The symbol LIB_ID name is empty." );
PART_LIBS* libs = Prj().SchLibs();
for( PART_LIBS_BASE::iterator it = libs->begin(); it != libs->end(); ++it )
{
// Ignore the cache library.
if( it->IsCache() )
continue;
LIB_ALIAS* alias = it->FindAlias( aSymbol->GetLibId().GetLibItemName().wx_str() );
// Found in the same library as the old look up method assuming the user didn't
// change the libraries or library ordering since the last time the schematic was
// loaded.
if( alias )
{
// Find the same library in the symbol library table using the full path and file name.
wxString libFileName = it->GetFullFileName();
const LIB_TABLE_ROW* row = Prj().SchSymbolLibTable()->FindRowByURI( libFileName );
if( row )
{
LIB_ID id = aSymbol->GetLibId();
id.SetLibNickname( row->GetNickName() );
// Don't resolve symbol library links now.
aSymbol->SetLibId( id, nullptr, nullptr );
return true;
}
}
}
return false;
}
void DIALOG_EDIT_COMPONENT_IN_LIBRARY::BrowseAndSelectDocFile( wxCommandEvent& event )
{
PROJECT& prj = Prj();
SEARCH_STACK* search = prj.SchSearchS();
wxString mask = wxT( "*" );
wxString docpath = prj.GetRString( PROJECT::DOC_PATH );
if( !docpath )
docpath = search->LastVisitedPath( wxT( "doc" ) );
wxString fullFileName = EDA_FILE_SELECTOR( _( "Doc Files" ),
docpath,
wxEmptyString,
wxEmptyString,
mask,
this,
wxFD_OPEN,
true );
if( fullFileName.IsEmpty() )
return;
/* If the path is already in the library search paths
* list, just add the library name to the list. Otherwise, add
* the library name with the full or relative path.
* the relative path, when possible is preferable,
* because it preserve use of default libraries paths, when the path is a sub path of
* these default paths
*/
wxFileName fn = fullFileName;
prj.SetRString( PROJECT::DOC_PATH, fn.GetPath() );
wxString filename = search->FilenameWithRelativePathInSearchList(
fullFileName, wxPathOnly( Prj().GetProjectFullName() ) );
// Filenames are always stored in unix like mode, ie separator "\" is stored as "/"
// to ensure files are identical under unices and windows
#ifdef __WINDOWS__
filename.Replace( wxT( "\\" ), wxT( "/" ) );
#endif
m_DocfileCtrl->SetValue( filename );
}
bool PCB_EDIT_FRAME::LoadProjectSettings()
{
wxLogDebug( wxT( "Loading project '%s' settings." ),
GetChars( Prj().GetProjectFullName() ) );
bool rc = Prj().ConfigLoad( Kiface().KifaceSearch(), GROUP_PCB, GetProjectFileParameters() );
// Load the page layout decr file, from the filename stored in
// BASE_SCREEN::m_PageLayoutDescrFileName, read in config project file
// If empty, or not existing, the default descr is loaded
WORKSHEET_LAYOUT& pglayout = WORKSHEET_LAYOUT::GetTheInstance();
wxString pg_fullfilename = WORKSHEET_LAYOUT::MakeFullFileName(
BASE_SCREEN::m_PageLayoutDescrFileName,
Prj().GetProjectPath() );
pglayout.SetPageLayout( pg_fullfilename );
return rc;
}
// Displays the list of available footprints in library name and select a footprint.
void DIALOG_EXCHANGE_MODULE::BrowseAndSelectFootprint( wxCommandEvent& event )
{
wxString newname;
newname = m_parent->SelectFootprint( m_parent, wxEmptyString, wxEmptyString, wxEmptyString,
Prj().PcbFootprintLibs() );
if( newname != wxEmptyString )
m_NewFootprintFPID->SetValue( newname );
}
void KICAD_MANAGER_FRAME::CreateNewProject( const wxFileName& aProjectFileName )
{
wxCHECK_RET( aProjectFileName.DirExists() && aProjectFileName.IsDirWritable(),
"Project folder must exist and be writable to create a new project." );
// Init project filename. This clears all elements from the project object.
SetProjectFileName( aProjectFileName.GetFullPath() );
// Copy kicad.pro file from template folder.
if( !aProjectFileName.FileExists() )
{
wxString srcFileName = sys_search().FindValidPath( "kicad.pro" );
// Create a minimal project (.pro) file if the template project file could not be copied.
if( !wxFileName::FileExists( srcFileName )
|| !wxCopyFile( srcFileName, aProjectFileName.GetFullPath() ) )
{
Prj().ConfigSave( PgmTop().SysSearch(), GeneralGroupName, s_KicadManagerParams );
}
}
// Ensure a "stub" for a schematic root sheet and a board exist.
// It will avoid messages from the schematic editor or the board editor to create a new file
// And forces the user to create main files under the right name for the project manager
wxFileName fn( aProjectFileName.GetFullPath() );
fn.SetExt( SchematicFileExtension );
// If a <project>.sch file does not exist, create a "stub" file ( minimal schematic file )
if( !fn.FileExists() )
{
wxFile file( fn.GetFullPath(), wxFile::write );
if( file.IsOpened() )
file.Write( wxT( "EESchema Schematic File Version 2\n"
"EELAYER 25 0\nEELAYER END\n$EndSCHEMATC\n" ) );
// wxFile dtor will close the file
}
// If a <project>.kicad_pcb or <project>.brd file does not exist,
// create a .kicad_pcb "stub" file
fn.SetExt( KiCadPcbFileExtension );
wxFileName leg_fn( fn );
leg_fn.SetExt( LegacyPcbFileExtension );
if( !fn.FileExists() && !leg_fn.FileExists() )
{
wxFile file( fn.GetFullPath(), wxFile::write );
if( file.IsOpened() )
file.Write( wxT( "(kicad_pcb (version 4) (host kicad \"dummy file\") )\n" ) );
// wxFile dtor will close the file
}
}
bool SCH_SCREEN::Save( FILE* aFile ) const
{
// Creates header
if( fprintf( aFile, "%s %s %d\n", EESCHEMA_FILE_STAMP,
SCHEMATIC_HEAD_STRING, EESCHEMA_VERSION ) < 0 )
return false;
BOOST_FOREACH( const PART_LIB& lib, *Prj().SchLibs() )
{
if( fprintf( aFile, "LIBS:%s\n", TO_UTF8( lib.GetName() ) ) < 0 )
return false;
}
// This section is not used, but written for file compatibility
if( fprintf( aFile, "EELAYER %d %d\n", LAYERSCH_ID_COUNT, 0 ) < 0
|| fprintf( aFile, "EELAYER END\n" ) < 0 )
return false;
/* Write page info, ScreenNumber and NumberOfScreen; not very meaningful for
* SheetNumber and Sheet Count in a complex hierarchy, but useful in
* simple hierarchy and flat hierarchy. Used also to search the root
* sheet ( ScreenNumber = 1 ) within the files
*/
const TITLE_BLOCK& tb = GetTitleBlock();
if( fprintf( aFile, "$Descr %s %d %d%s\n", TO_UTF8( m_paper.GetType() ),
m_paper.GetWidthMils(),
m_paper.GetHeightMils(),
!m_paper.IsCustom() && m_paper.IsPortrait() ?
" portrait" : ""
) < 0
|| fprintf( aFile, "encoding utf-8\n") < 0
|| fprintf( aFile, "Sheet %d %d\n", m_ScreenNumber, m_NumberOfScreens ) < 0
|| fprintf( aFile, "Title %s\n", EscapedUTF8( tb.GetTitle() ).c_str() ) < 0
|| fprintf( aFile, "Date %s\n", EscapedUTF8( tb.GetDate() ).c_str() ) < 0
|| fprintf( aFile, "Rev %s\n", EscapedUTF8( tb.GetRevision() ).c_str() ) < 0
|| fprintf( aFile, "Comp %s\n", EscapedUTF8( tb.GetCompany() ).c_str() ) < 0
|| fprintf( aFile, "Comment1 %s\n", EscapedUTF8( tb.GetComment1() ).c_str() ) < 0
|| fprintf( aFile, "Comment2 %s\n", EscapedUTF8( tb.GetComment2() ).c_str() ) < 0
|| fprintf( aFile, "Comment3 %s\n", EscapedUTF8( tb.GetComment3() ).c_str() ) < 0
|| fprintf( aFile, "Comment4 %s\n", EscapedUTF8( tb.GetComment4() ).c_str() ) < 0
|| fprintf( aFile, "$EndDescr\n" ) < 0 )
return false;
for( SCH_ITEM* item = m_drawList.begin(); item; item = item->Next() )
{
if( !item->Save( aFile ) )
return false;
}
if( fprintf( aFile, "$EndSCHEMATC\n" ) < 0 )
return false;
return true;
}
bool SCH_BASE_FRAME::saveSymbolLibTables( bool aGlobal, bool aProject )
{
bool success = true;
if( aGlobal )
{
try
{
FILE_OUTPUTFORMATTER sf( SYMBOL_LIB_TABLE::GetGlobalTableFileName() );
SYMBOL_LIB_TABLE::GetGlobalLibTable().Format( &sf, 0 );
}
catch( const IO_ERROR& ioe )
{
success = false;
wxString msg = wxString::Format( _( "Error occurred saving the global symbol library "
"table:\n\n%s" ),
GetChars( ioe.What().GetData() ) );
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
if( aProject && !Prj().GetProjectName().IsEmpty() )
{
wxFileName fn( Prj().GetProjectPath(), SYMBOL_LIB_TABLE::GetSymbolLibTableFileName() );
try
{
Prj().SchSymbolLibTable()->Save( fn.GetFullPath() );
}
catch( const IO_ERROR& ioe )
{
success = false;
wxString msg = wxString::Format( _( "Error occurred saving project specific "
"symbol library table:\n\n%s" ),
GetChars( ioe.What() ) );
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
return success;
}
LIB_ALIAS* LIB_VIEW_FRAME::getSelectedAlias() const
{
LIB_ALIAS* alias = NULL;
if( !m_libraryName.IsEmpty() && !m_entryName.IsEmpty() )
{
alias = Prj().SchSymbolLibTable()->LoadSymbol( m_libraryName, m_entryName );
}
return alias;
}
LIB_PIN* SCH_SCREEN::GetPin( const wxPoint& aPosition, SCH_COMPONENT** aComponent,
bool aEndPointOnly ) const
{
SCH_ITEM* item;
SCH_COMPONENT* component = NULL;
LIB_PIN* pin = NULL;
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( item->Type() != SCH_COMPONENT_T )
continue;
component = (SCH_COMPONENT*) item;
if( aEndPointOnly )
{
pin = NULL;
LIB_PART* part = Prj().SchLibs()->FindLibPart( component->GetPartName() );
if( !part )
continue;
for( pin = part->GetNextPin(); pin; pin = part->GetNextPin( pin ) )
{
// Skip items not used for this part.
if( component->GetUnit() && pin->GetUnit() &&
( pin->GetUnit() != component->GetUnit() ) )
continue;
if( component->GetConvert() && pin->GetConvert() &&
( pin->GetConvert() != component->GetConvert() ) )
continue;
if(component->GetPinPhysicalPosition( pin ) == aPosition )
break;
}
if( pin )
break;
}
else
{
pin = (LIB_PIN*) component->GetDrawItem( aPosition, LIB_PIN_T );
if( pin )
break;
}
}
if( pin && aComponent )
*aComponent = component;
return pin;
}
void PCB_EDIT_FRAME::SaveProjectSettings( bool aAskForSave )
{
wxFileName fn = Prj().GetProjectFullName();
if( aAskForSave )
{
wxFileDialog dlg( this, _( "Save Project File" ),
fn.GetPath(), fn.GetFullName(),
ProjectFileWildcard, wxFD_SAVE | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
return;
fn = dlg.GetPath();
}
wxString pro_name = fn.GetFullPath();
Prj().ConfigSave( Kiface().KifaceSearch(), GROUP_PCB, GetProjectFileParameters(), pro_name );
}
bool PCB_EDIT_FRAME::LoadProjectSettings( const wxString& aProjectFileName )
{
wxLogDebug( wxT( "Loading project '%s' settings." ), GetChars( aProjectFileName ) );
wxFileName fn = aProjectFileName;
if( fn.GetExt() != ProjectFileExtension )
fn.SetExt( ProjectFileExtension );
// was: wxGetApp().ReadProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters(), false );
Prj().ConfigLoad( Kiface().KifaceSearch(), fn.GetFullPath(), GROUP_PCB, GetProjectFileParameters(), false );
// Dick 5-Feb-2012: I don't agree with this, the BOARD contents should dictate
// what is visible or not, even initially. And since PCB_EDIT_FRAME projects settings
// have no control over what is visible (see PCB_EDIT_FRAME::GetProjectFileParameters())
// this is recklessly turning on things the user may not want to see.
#if 0
/* Reset the items visibility flag when loading a new configuration because it could
* create SERIOUS mistakes for the user if board items are not visible after loading
* a board. Grid and ratsnest can be left to their previous state.
*/
bool showGrid = IsElementVisible( GRID_VISIBLE );
bool showRats = IsElementVisible( RATSNEST_VISIBLE );
SetVisibleAlls();
SetElementVisibility( GRID_VISIBLE, showGrid );
SetElementVisibility( RATSNEST_VISIBLE, showRats );
#endif
Prj().ElemClear( PROJECT::ELEM_FPTBL ); // Force it to be reloaded on demand.
// Load the page layout decr file, from the filename stored in
// BASE_SCREEN::m_PageLayoutDescrFileName, read in config project file
// If empty, the default descr is loaded
WORKSHEET_LAYOUT& pglayout = WORKSHEET_LAYOUT::GetTheInstance();
pglayout.SetPageLayout( BASE_SCREEN::m_PageLayoutDescrFileName );
return true;
}
void PCB_EDIT_FRAME::InstallNetlistFrame( wxDC* DC )
{
/* Setup the netlist file name to the last netlist file read,
* or the board file name if the last filename is empty or last file not existing.
*/
wxString netlistName = GetLastNetListRead();
wxFileName fn = netlistName;
if( !fn.IsOk() || !fn.FileExists() )
{
fn = GetBoard()->GetFileName();
fn.SetExt( NetlistFileExtension );
if( fn.GetName().IsEmpty() )
netlistName.Clear();
else
netlistName = fn.GetFullPath();
}
DIALOG_NETLIST dlg( this, DC, netlistName );
dlg.ShowModal();
// Save project settings if needed.
// Project settings are saved in the corresponding <board name>.pro file
bool configChanged = !GetLastNetListRead().IsEmpty() && ( netlistName != GetLastNetListRead() );
if( configChanged && !GetBoard()->GetFileName().IsEmpty()
&& IsOK( NULL, _( "The project configuration has changed. Do you want to save it?" ) ) )
{
fn = Prj().AbsolutePath( GetBoard()->GetFileName() );
fn.SetExt( ProjectFileExtension );
wxString pro_name = fn.GetFullPath();
Prj().ConfigSave( Kiface().KifaceSearch(), GROUP_PCB,
GetProjectFileParameters(), pro_name );
}
}
PART_LIB* SCH_BASE_FRAME::SelectLibraryFromList()
{
PROJECT& prj = Prj();
if( PART_LIBS* libs = prj.SchLibs() )
{
if( !libs->GetLibraryCount() )
{
DisplayError( this, _( "No component libraries are loaded." ) );
return NULL;
}
wxArrayString headers;
headers.Add( wxT( "Library" ) );
wxArrayString libNamesList = libs->GetLibraryNames();
std::vector<wxArrayString> itemsToDisplay;
// Conversion from wxArrayString to vector of ArrayString
for( unsigned i = 0; i < libNamesList.GetCount(); i++ )
{
wxArrayString item;
item.Add( libNamesList[i] );
itemsToDisplay.push_back( item );
}
wxString old_lib_name = prj.GetRString( PROJECT::SCH_LIB_SELECT );
EDA_LIST_DIALOG dlg( this, _( "Select Library" ), headers, itemsToDisplay, old_lib_name );
if( dlg.ShowModal() != wxID_OK )
return NULL;
wxString libname = dlg.GetTextSelection();
if( !libname )
return NULL;
PART_LIB* lib = libs->FindLibrary( libname );
if( lib )
prj.SetRString( PROJECT::SCH_LIB_SELECT, libname );
return lib;
}
return NULL;
}
void LIB_EDIT_FRAME::KiwayMailIn( KIWAY_EXPRESS& mail )
{
const std::string& payload = mail.GetPayload();
switch( mail.Command() )
{
case MAIL_LIB_EDIT:
if( !payload.empty() )
{
wxString libFileName( payload );
wxString libNickname;
wxString msg;
SYMBOL_LIB_TABLE* libTable = Prj().SchSymbolLibTable();
const LIB_TABLE_ROW* libTableRow = libTable->FindRowByURI( libFileName );
if( !libTableRow )
{
msg.Printf( _( "The current configuration does not include the symbol library\n"
"\"%s\".\nUse Manage Symbol Libraries to edit the configuration." ),
libFileName );
DisplayErrorMessage( this, _( "Library not found in symbol library table." ), msg );
break;
}
libNickname = libTableRow->GetNickName();
if( !libTable->HasLibrary( libNickname, true ) )
{
msg.Printf( _( "The library with the nickname \"%s\" is not enabled\n"
"in the current configuration. Use Manage Symbol Libraries to\n"
"edit the configuration." ), libNickname );
DisplayErrorMessage( this, _( "Symbol library not enabled." ), msg );
break;
}
SetCurLib( libNickname );
if( m_treePane )
{
LIB_ID id( libNickname, wxEmptyString );
m_treePane->GetLibTree()->ExpandLibId( id );
m_treePane->GetLibTree()->CenterLibId( id );
}
}
break;
default:
;
}
}
void LIB_VIEW_FRAME::DisplayLibInfos()
{
PART_LIBS* libs = Prj().SchLibs();
if( libs )
{
PART_LIB* lib = libs->FindLibrary( m_libraryName );
wxString title = wxString::Format( "Library Browser \u2014 %s",
lib ? lib->GetFullFileName() : "no library selected" );
SetTitle( title );
}
}
bool PCB_EDIT_FRAME::LoadProjectSettings( const wxString& aProjectFileName )
{
wxLogDebug( wxT( "Loading project '%s' settings." ), GetChars( aProjectFileName ) );
wxFileName fn = aProjectFileName;
if( fn.GetExt() != ProjectFileExtension )
fn.SetExt( ProjectFileExtension );
// was: wxGetApp().ReadProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters(), false );
Prj().ConfigLoad( Kiface().KifaceSearch(), fn.GetFullPath(), GROUP_PCB, GetProjectFileParameters(), false );
Prj().ElemClear( PROJECT::ELEM_FPTBL ); // Force it to be reloaded on demand.
// Load the page layout decr file, from the filename stored in
// BASE_SCREEN::m_PageLayoutDescrFileName, read in config project file
// If empty, the default descr is loaded
WORKSHEET_LAYOUT& pglayout = WORKSHEET_LAYOUT::GetTheInstance();
pglayout.SetPageLayout( BASE_SCREEN::m_PageLayoutDescrFileName );
return true;
}
void FOOTPRINT_EDIT_FRAME::updateTitle()
{
wxString title = _( "Footprint Editor" );
LIB_ID fpid = GetLoadedFPID();
bool writable = true;
if( IsCurrentFPFromBoard() )
{
title += wxString::Format( wxT( " \u2014 %s [from %s.%s]" ),
GetBoard()->m_Modules->GetReference(),
Prj().GetProjectName(), PcbFileExtension );
}
else if( fpid.IsValid() )
{
try
{
writable = Prj().PcbFootprintLibs()->IsFootprintLibWritable( fpid.GetLibNickname() );
}
catch( const IO_ERROR& )
{
// best efforts...
}
// Note: don't used GetLoadedFPID(); footprint name may have been edited
title += wxString::Format( wxT( " \u2014 %s %s" ),
FROM_UTF8( GetBoard()->m_Modules->GetFPID().Format().c_str() ),
writable ? wxString( wxEmptyString ) : _( "[Read Only]" ) );
}
else if( !fpid.GetLibItemName().empty() )
{
// Note: don't used GetLoadedFPID(); footprint name may have been edited
title += wxString::Format( wxT( " \u2014 %s %s" ),
FROM_UTF8( GetBoard()->m_Modules->GetFPID().GetLibItemName().c_str() ),
_( "[Unsaved]" ) );
}
SetTitle( title );
}
DIALOG_CONFIG_EQUFILES::DIALOG_CONFIG_EQUFILES( CVPCB_MAINFRAME* aParent ) :
DIALOG_CONFIG_EQUFILES_BASE( aParent )
{
m_Parent = aParent;
m_Config = Pgm().CommonSettings();
PROJECT& prj = Prj();
SetTitle( wxString::Format( _( "Project file: '%s'" ), GetChars( prj.GetProjectFullName() ) ) );
Init( );
GetSizer()->SetSizeHints( this );
Center();
}
/*
* TODO: Copy of DIALOG_PLOT::OnOutputDirectoryBrowseClicked in dialog_plot.cpp, maybe merge to a common method.
*/
void DIALOG_PLOT_SCHEMATIC::OnOutputDirectoryBrowseClicked( wxCommandEvent& event )
{
// Build the absolute path of current output plot directory
// to preselect it when opening the dialog.
wxFileName fn( m_outputDirectoryName->GetValue() );
wxString path = Prj().AbsolutePath( m_outputDirectoryName->GetValue() );
wxDirDialog dirDialog( this, _( "Select Output Directory" ), path );
if( dirDialog.ShowModal() == wxID_CANCEL )
{
return;
}
wxFileName dirName = wxFileName::DirName( dirDialog.GetPath() );
wxMessageDialog dialog( this, _( "Use a relative path? " ),
_( "Plot Output Directory" ),
wxYES_NO | wxICON_QUESTION | wxYES_DEFAULT );
// relative directory selected
if( dialog.ShowModal() == wxID_YES )
{
wxString plotFilePath = m_parent->GetUniqueFilenameForCurrentSheet() + wxT( "." )
+ PS_PLOTTER::GetDefaultFileExtension();
plotFilePath = Prj().AbsolutePath(plotFilePath);
plotFilePath = wxPathOnly( plotFilePath );
if( !dirName.MakeRelativeTo( plotFilePath ) )
wxMessageBox( _( "Cannot make path relative (target volume different from board file volume)!" ),
_( "Plot Output Directory" ), wxOK | wxICON_ERROR );
}
m_outputDirectoryName->SetValue( dirName.GetFullPath() );
}
void DIALOG_EESCHEMA_CONFIG::OnCancelClick( wxCommandEvent& event )
{
SEARCH_STACK& lib_search = Prj().SchSearchS();
// Recreate the user lib path
if( m_LibPathChanged )
{
for( unsigned ii = 0; ii < m_listUserPaths->GetCount(); ii++ )
lib_search.RemovePaths( m_listUserPaths->GetString(ii) );
lib_search.AddPaths( m_Parent->GetUserLibraryPath(), 1 );
}
EndModal( wxID_CANCEL );
}
void DIALOG_DRC_CONTROL::OnButtonBrowseRptFileClick( wxCommandEvent& )
{
wxFileName fn = m_brdEditor->GetBoard()->GetFileName();
fn.SetExt( ReportFileExtension );
wxString prj_path = Prj().GetProjectPath();
wxFileDialog dlg( this, _( "Save DRC Report File" ), prj_path, fn.GetFullName(),
ReportFileWildcard(), wxFD_SAVE | wxFD_OVERWRITE_PROMPT );
if( dlg.ShowModal() == wxID_CANCEL )
return;
m_CreateRptCtrl->SetValue( true );
m_RptFilenameCtrl->SetValue( dlg.GetPath() );
}
void FOOTPRINT_EDIT_FRAME::retainLastFootprint()
{
PCB_IO pcb_io;
MODULE* module = GetBoard()->m_Modules;
if( module )
{
pcb_io.Format( module );
wxString pretty = FROM_UTF8( pcb_io.GetStringOutput( true ).c_str() );
// save the footprint in the RSTRING facility.
Prj().SetRString( PROJECT::PCB_FOOTPRINT, pretty );
}
}
const wxString FOOTPRINT_EDIT_FRAME::getLibPath()
{
try
{
const wxString& nickname = GetCurrentLib();
const FP_LIB_TABLE::ROW* row = Prj().PcbFootprintLibs()->FindRow( nickname );
return row->GetFullURI( true );
}
catch( const IO_ERROR& ioe )
{
return wxEmptyString;
}
}
void LIB_VIEW_FRAME::RedrawActiveWindow( wxDC* DC, bool EraseBg )
{
LIB_ALIAS* entry = Prj().SchLibs()->FindLibraryAlias( m_entryName, m_libraryName );
if( !entry )
return;
LIB_PART* part = entry->GetPart();
if( !part )
return;
wxString msg;
wxString tmp;
m_canvas->DrawBackGround( DC );
if( !entry->IsRoot() )
{
// Temporarily change the name field text to reflect the alias name.
msg = entry->GetName();
tmp = part->GetName();
part->SetName( msg );
if( m_unit < 1 )
m_unit = 1;
if( m_convert < 1 )
m_convert = 1;
}
else
msg = _( "None" );
part->Draw( m_canvas, DC, wxPoint( 0, 0 ), m_unit, m_convert, GR_DEFAULT_DRAWMODE );
// Redraw the cursor
m_canvas->DrawCrossHair( DC );
if( !tmp.IsEmpty() )
part->SetName( tmp );
ClearMsgPanel();
AppendMsgPanel( _( "Part" ), part->GetName(), BLUE, 6 );
AppendMsgPanel( _( "Alias" ), msg, RED, 6 );
AppendMsgPanel( _( "Description" ), entry->GetDescription(), CYAN, 6 );
AppendMsgPanel( _( "Key words" ), entry->GetKeyWords(), DARKDARKGRAY );
}
bool LIB_VIEW_FRAME::ReCreateListCmp()
{
if( m_cmpList == NULL )
return false;
wxArrayString aliasNames;
try
{
Prj().SchSymbolLibTable()->EnumerateSymbolLib( m_libraryName, aliasNames,
m_listPowerCmpOnly );
}
catch( const IO_ERROR& ) {} // ignore, it is handled below
m_cmpList->Clear();
if( aliasNames.IsEmpty() )
{
m_libraryName = wxEmptyString;
m_entryName = wxEmptyString;
m_convert = 1;
m_unit = 1;
return true;
}
m_cmpList->Append( aliasNames );
int index = m_cmpList->FindString( m_entryName );
bool changed = false;
if( index == wxNOT_FOUND )
{
// Select the first library entry when the previous entry name does not exist in
// the current library.
m_convert = 1;
m_unit = 1;
index = 0;
changed = true;
m_entryName = wxEmptyString;
}
m_cmpList->SetSelection( index, true );
wxCommandEvent evt( wxEVT_COMMAND_LISTBOX_SELECTED, ID_LIBVIEW_CMP_LIST );
ProcessEvent( evt );
return changed;
}
bool PCB_EDIT_FRAME::doAutoSave()
{
wxFileName tmpFileName;
if( GetBoard()->GetFileName().IsEmpty() )
{
tmpFileName = wxFileName( wxStandardPaths::Get().GetDocumentsDir(), wxT( "noname" ),
KiCadPcbFileExtension );
GetBoard()->SetFileName( tmpFileName.GetFullPath() );
}
else
{
tmpFileName = Prj().AbsolutePath( GetBoard()->GetFileName() );
}
wxFileName autoSaveFileName = tmpFileName;
// Auto save file name is the board file name prepended with autosaveFilePrefix string.
autoSaveFileName.SetName( GetAutoSaveFilePrefix() + autoSaveFileName.GetName() );
if( !autoSaveFileName.IsOk() )
return false;
// If the board file path is not writable, try writing to a platform specific temp file
// path. If that path isn't writabe, give up.
if( !autoSaveFileName.IsDirWritable() )
{
autoSaveFileName.SetPath( wxFileName::GetTempDir() );
if( !autoSaveFileName.IsOk() || !autoSaveFileName.IsDirWritable() )
return false;
}
wxLogTrace( traceAutoSave, "Creating auto save file <" + autoSaveFileName.GetFullPath() + ">" );
if( SavePcbFile( autoSaveFileName.GetFullPath(), NO_BACKUP_FILE ) )
{
GetScreen()->SetModify();
GetBoard()->SetFileName( tmpFileName.GetFullPath() );
UpdateTitle();
m_autoSaveState = false;
return true;
}
GetBoard()->SetFileName( tmpFileName.GetFullPath() );
return false;
}
DIALOG_MODULE_BOARD_EDITOR::~DIALOG_MODULE_BOARD_EDITOR()
{
m_page = m_NoteBook->GetSelection();
for( unsigned ii = 0; ii < m_Shapes3D_list.size(); ii++ )
delete m_Shapes3D_list[ii];
m_Shapes3D_list.clear();
// free the memory used by all models, otherwise models which were
// browsed but not used would consume memory
Prj().Get3DCacheManager()->FlushCache( false );
delete m_ReferenceCopy;
delete m_ValueCopy;
}
