int main(void)
{
int Status;
xil_printf("QSPI Selftest Example \r\n");
/*
* Call the example , specify the device ID that is generated in
* xparameters.h
*/
Status = QspiPsSelfTestExample(QSPI_DEVICE_ID);
if (Status != XST_SUCCESS) {
xil_printf("QSPI Selftest Example Failed\r\n");
return XST_FAILURE;
}
xil_printf("Successfully ran QSPI Selftest Example\r\n");
return XST_SUCCESS;
}
int main()
{
static XScuGic intc;
static XEmacPs ps7_ethernet_0;
static XGpio axi_btn_Gpio;
static XScuTimer ps7_scutimer_0;
static XScuWdt ps7_scuwdt_0;
Xil_ICacheEnable();
Xil_DCacheEnable();
print("---Entering main---\n\r");
{
int Status;
print("\r\n Running ScuGicSelfTestExample() for ps7_scugic_0...\r\n");
Status = ScuGicSelfTestExample(XPAR_PS7_SCUGIC_0_DEVICE_ID);
if (Status == 0) {
print("ScuGicSelfTestExample PASSED\r\n");
}
else {
print("ScuGicSelfTestExample FAILED\r\n");
}
}
{
int Status;
Status = ScuGicInterruptSetup(&intc, XPAR_PS7_SCUGIC_0_DEVICE_ID);
if (Status == 0) {
print("ScuGic Interrupt Setup PASSED\r\n");
}
else {
print("ScuGic Interrupt Setup FAILED\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioOutputExample() for axi_led...\r\n");
status = GpioOutputExample(XPAR_AXI_LED_DEVICE_ID,4);
if (status == 0) {
print("GpioOutputExample PASSED.\r\n");
}
else {
print("GpioOutputExample FAILED.\r\n");
}
}
{
int Status;
print("\r\n Running DcfgSelfTestExample() for ps7_dev_cfg_0...\r\n");
Status = DcfgSelfTestExample(XPAR_PS7_DEV_CFG_0_DEVICE_ID);
if (Status == 0) {
print("DcfgSelfTestExample PASSED\r\n");
}
else {
print("DcfgSelfTestExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running XDmaPs_Example_W_Intr() for ps7_dma_s...\r\n");
Status = XDmaPs_Example_W_Intr(&intc,XPAR_PS7_DMA_S_DEVICE_ID);
if (Status == 0) {
print("XDmaPs_Example_W_Intr PASSED\r\n");
}
else {
print("XDmaPs_Example_W_Intr FAILED\r\n");
}
}
{
int Status;
print("\r\n Running Interrupt Test for ps7_ethernet_0...\r\n");
Status = EmacPsDmaIntrExample(&intc, &ps7_ethernet_0, \
XPAR_PS7_ETHERNET_0_DEVICE_ID, \
XPAR_PS7_ETHERNET_0_INTR);
if (Status == 0) {
print("EmacPsDmaIntrExample PASSED\r\n");
}
else {
print("EmacPsDmaIntrExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running IicPsSelfTestExample() for ps7_i2c_0...\r\n");
Status = IicPsSelfTestExample(XPAR_PS7_I2C_0_DEVICE_ID);
if (Status == 0) {
print("IicPsSelfTestExample PASSED\r\n");
}
else {
print("IicPsSelfTestExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running QspiSelfTestExample() for ps7_qspi_0...\r\n");
Status = QspiPsSelfTestExample(XPAR_PS7_QSPI_0_DEVICE_ID);
if (Status == 0) {
print("QspiPsSelfTestExample PASSED\r\n");
}
else {
print("QspiPsSelfTestExample FAILED\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioInputExample() for axi_btn...\r\n");
u32 DataRead;
status = GpioInputExample(XPAR_AXI_BTN_DEVICE_ID, &DataRead);
if (status == 0) {
xil_printf("GpioInputExample PASSED. Read data:0x%X\r\n", DataRead);
}
else {
print("GpioInputExample FAILED.\r\n");
}
}
{
int Status;
u32 DataRead;
print(" Press button to Generate Interrupt\r\n");
Status = GpioIntrExample(&intc, &axi_btn_Gpio, \
XPAR_AXI_BTN_DEVICE_ID, \
XPAR_FABRIC_AXI_BTN_IP2INTC_IRPT_INTR, \
GPIO_CHANNEL1, &DataRead);
if (Status == 0 ){
if(DataRead == 0)
print("No button pressed. \r\n");
else
print("Gpio Interrupt Test PASSED. \r\n");
}
else {
print("Gpio Interrupt Test FAILED.\r\n");
}
}
{
int Status;
print("\r\n Running ScuTimerPolledExample() for ps7_scutimer_0...\r\n");
Status = ScuTimerPolledExample(XPAR_PS7_SCUTIMER_0_DEVICE_ID);
if (Status == 0) {
print("ScuTimerPolledExample PASSED\r\n");
}
else {
print("ScuTimerPolledExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running Interrupt Test for ps7_scutimer_0...\r\n");
Status = ScuTimerIntrExample(&intc, &ps7_scutimer_0, \
XPAR_PS7_SCUTIMER_0_DEVICE_ID, \
XPAR_PS7_SCUTIMER_0_INTR);
if (Status == 0) {
print("ScuTimerIntrExample PASSED\r\n");
}
else {
print("ScuTimerIntrExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running Interrupt Test for ps7_scuwdt_0...\r\n");
Status = ScuWdtIntrExample(&intc, &ps7_scuwdt_0, \
XPAR_PS7_SCUWDT_0_DEVICE_ID, \
XPAR_PS7_SCUWDT_0_INTR);
if (Status == 0) {
print("ScuWdtIntrExample PASSED\r\n");
}
else {
print("ScuWdtIntrExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running SpiPsSelfTestExample() for ps7_spi_1...\r\n");
Status = SpiPsSelfTestExample(XPAR_PS7_SPI_1_DEVICE_ID);
if (Status == 0) {
print("SpiPsSelfTestExample PASSED\r\n");
}
else {
print("SpiPsSelfTestExample FAILED\r\n");
}
}
/*
* Peripheral Test will not be run for ps7_uart_1
* because it has been selected as the STDOUT device
*/
print("---Exiting main---\n\r");
Xil_DCacheDisable();
Xil_ICacheDisable();
return 0;
}
int main()
{
static XScuGic intc;
static XEmacPs ps7_ethernet_0;
static XScuTimer ps7_scutimer_0;
static XScuWdt ps7_scuwdt_0;
Xil_ICacheEnable();
Xil_DCacheEnable();
print("---Entering main---\n\r");
{
int Status;
print("\r\n Running ScuGicSelfTestExample() for ps7_scugic_0...\r\n");
Status = ScuGicSelfTestExample(XPAR_PS7_SCUGIC_0_DEVICE_ID);
if (Status == 0) {
print("ScuGicSelfTestExample PASSED\r\n");
}
else {
print("ScuGicSelfTestExample FAILED\r\n");
}
}
{
int Status;
Status = ScuGicInterruptSetup(&intc, XPAR_PS7_SCUGIC_0_DEVICE_ID);
if (Status == 0) {
print("ScuGic Interrupt Setup PASSED\r\n");
}
else {
print("ScuGic Interrupt Setup FAILED\r\n");
}
}
{
int Status;
print("\r\n Running XDmaPs_Example_W_Intr() for ps7_dma_s...\r\n");
Status = XDmaPs_Example_W_Intr(&intc,XPAR_PS7_DMA_S_DEVICE_ID);
if (Status == 0) {
print("XDmaPs_Example_W_Intr PASSED\r\n");
}
else {
print("XDmaPs_Example_W_Intr FAILED\r\n");
}
}
{
int Status;
print("\r\n Running Interrupt Test for ps7_ethernet_0...\r\n");
Status = EmacPsDmaIntrExample(&intc, &ps7_ethernet_0, \
XPAR_PS7_ETHERNET_0_DEVICE_ID, \
XPAR_PS7_ETHERNET_0_INTR);
if (Status == 0) {
print("EmacPsDmaIntrExample PASSED\r\n");
}
else {
print("EmacPsDmaIntrExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running QspiSelfTestExample() for ps7_qspi_0...\r\n");
Status = QspiPsSelfTestExample(XPAR_PS7_QSPI_0_DEVICE_ID);
if (Status == 0) {
print("QspiPsSelfTestExample PASSED\r\n");
}
else {
print("QspiPsSelfTestExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running DcfgSelfTestExample() for ps7_dev_cfg_0...\r\n");
Status = DcfgSelfTestExample(XPAR_PS7_DEV_CFG_0_DEVICE_ID);
if (Status == 0) {
print("DcfgSelfTestExample PASSED\r\n");
}
else {
print("DcfgSelfTestExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running ScuTimerPolledExample() for ps7_scutimer_0...\r\n");
Status = ScuTimerPolledExample(XPAR_PS7_SCUTIMER_0_DEVICE_ID);
if (Status == 0) {
print("ScuTimerPolledExample PASSED\r\n");
}
else {
print("ScuTimerPolledExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running Interrupt Test for ps7_scutimer_0...\r\n");
Status = ScuTimerIntrExample(&intc, &ps7_scutimer_0, \
XPAR_PS7_SCUTIMER_0_DEVICE_ID, \
XPAR_PS7_SCUTIMER_0_INTR);
if (Status == 0) {
print("ScuTimerIntrExample PASSED\r\n");
}
else {
print("ScuTimerIntrExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running Interrupt Test for ps7_scuwdt_0...\r\n");
Status = ScuWdtIntrExample(&intc, &ps7_scuwdt_0, \
XPAR_PS7_SCUWDT_0_DEVICE_ID, \
XPAR_PS7_SCUWDT_0_INTR);
if (Status == 0) {
print("ScuWdtIntrExample PASSED\r\n");
}
else {
print("ScuWdtIntrExample FAILED\r\n");
}
}
/*
* Peripheral Test will not be run for ps7_uart_1
* because it has been selected as the STDOUT device
*/
print("---Exiting main---\n\r");
Xil_DCacheDisable();
Xil_ICacheDisable();
return 0;
}
