PRIVATE void rpc__dg_xmit_error_body_pkt
(
rpc_socket_t sock,
rpc_addr_p_t addr,
rpc_dg_pkt_hdr_p_t hdrp,
rpc_dg_ptype_t ptype,
unsigned32 errst
)
{
rpc_socket_iovec_t iov[2];
rpc_dg_pkt_hdr_t hdr;
#ifndef MISPACKED_HDR
rpc_dg_epkt_body_t body;
#else
rpc_dg_raw_epkt_body_t body;
#endif
boolean b;
/*
* Create a pkt header initialized with the prototype's contents.
*/
hdr = *hdrp;
RPC_DG_HDR_SET_VERS(&hdr);
RPC_DG_HDR_SET_PTYPE(&hdr, ptype);
RPC_DG_HDR_SET_DREP(&hdr);
hdr.flags = 0;
hdr.flags2 = 0;
hdr.len = RPC_C_DG_RAW_EPKT_BODY_SIZE;
/*
* Create the error body packet's body.
*/
#ifndef MISPACKED_HDR
body.st = errst;
#else
#error "extract and pack the 32 bit status code into the body" /*!!! */
#endif
/*
* Setup the iov and send the packet.
*/
iov[0].iov_base = (byte_p_t) &hdr;
iov[0].iov_len = RPC_C_DG_RAW_PKT_HDR_SIZE;
iov[1].iov_base = (byte_p_t) &body;
iov[1].iov_len = hdr.len;
rpc__dg_xmit_pkt(sock, addr, iov, 2, &b);
RPC_DBG_GPRINTF(("(rpc__dg_xmit_call_error_body_pkt) \"%s\" - st 0x%x sent\n",
rpc__dg_pkt_name(ptype), errst));
}
PRIVATE void rpc__noauth_dg_way_handler
(
rpc_auth_info_p_t info,
ndr_byte *in_data,
signed32 in_len,
signed32 out_max_len,
ndr_byte *out_data,
signed32 *out_len,
unsigned32 *stp
)
{
sec_krb_message message;
error_status_t st;
rpc_noauth_info_p_t noauth_info = (rpc_noauth_info_p_t)info;
*out_len = 0;
RPC_DBG_PRINTF(rpc_e_dbg_auth, 2, ("(rpc__noauth_dg_way_handler) %x called back\n", info));
if (noauth_info->status != rpc_s_ok)
{
RPC_DBG_GPRINTF(("(rpc__noauth_dg_way_handler) handle was poisoned with %x\n",
noauth_info->status));
*stp = noauth_info->status;
return;
}
message.data = 0;
message.length = 0;
st = sec_krb_dg_build_message (noauth_info->auth_info.u.auth_identity, 0, 0,
rpc_c_authn_level_none, noauth_info->auth_info.authz_protocol,
0, 0, 0, &message);
if (st != rpc_s_ok)
goto out;
if (message.length > out_max_len)
{
st = rpc_s_credentials_too_large;
goto out;
}
memcpy(out_data, message.data, message.length);
*out_len = message.length;
out:
sec_krb_message_free(&message);
*stp = st;
return;
}
PRIVATE void rpc__dg_xmit_pkt
(
rpc_socket_t sock,
rpc_addr_p_t addr,
rpc_socket_iovec_p_t iov,
int iovlen,
boolean *b
)
{
#ifdef MISPACKED_HDR
rpc_dg_raw_pkt_hdr_t raw_hdr;
rpc_dg_pkt_hdr_p_t hdrp;
#endif
rpc_socket_error_t serr;
int sendcc = 0;
int sentcc;
int i;
#ifdef MISPACKED_HDR
if (iov[0].len != RPC_C_DG_RAW_PKT_HDR_SIZE)
{
/* !!! ...compress hdr pointed to by iov[0] into raw_hdr... !!! */
hdrp = (iov)[0].base;
compress_hdr(hdrp, &raw_hdr);
(iov)[0].iov_base = (caddr_t) &raw_hdr;
}
#endif
for (i = 0; i < iovlen; i++)
sendcc += iov[i].iov_len;
*b = true;
RPC_DG_SOCKET_SENDMSG_OOL(sock, iov, iovlen, addr, &sentcc, &serr);
if (RPC_SOCKET_IS_ERR(serr) || sentcc != sendcc)
{
RPC_DBG_GPRINTF(("(rpc__dg_xmit_pkt) sendmsg failed, sendcc = %d, sentcc = %d, error = %d\n",
sendcc, sentcc, RPC_SOCKET_ETOI(serr)));
*b = false;
}
RPC_DG_STATS_INCR(pkts_sent);
RPC_DG_STATS_INCR(pstats[RPC_DG_HDR_INQ_PTYPE(((rpc_dg_pkt_hdr_p_t) iov[0].iov_base))].sent);
#ifdef MISPACKED_HDR
iov[0].iov_base = hdrp;
#endif
}
PRIVATE void rpc__noauth_dg_who_are_you
(
rpc_auth_info_p_t info,
handle_t h,
idl_uuid_t *actuid,
unsigned32 boot_time,
unsigned32 *seq,
idl_uuid_t *cas_uuid,
unsigned32 *stp
)
{
rpc_noauth_info_p_t noauth_info = (rpc_noauth_info_p_t)info;
unsigned char inbuf[12]; /* XXX size */
unsigned char outbuf[1000]; /* XXX size */
unsigned_char_p_t server;
signed32 outlen;
sec_krb_message message;
int st;
/* XXX set up exception handler here around remote call? */
RPC_DBG_PRINTF(rpc_e_dbg_auth, 2, ("(rpc__noauth_dg_way) %x doing callback\n", info));
/* do call */
(*conv_v3_0_c_epv.conv_who_are_you_auth)
(h, actuid, boot_time, inbuf, 0, sizeof(outbuf),
seq, cas_uuid, outbuf, &outlen, stp);
st = *stp;
if (st != rpc_s_ok)
{
RPC_DBG_GPRINTF(("(rpc__noauth_dg_way) conv_who_are_you_auth failed, st %x\n", st));
return;
}
message.data = outbuf;
message.length = outlen;
*stp = sec_krb_dg_decode_message (&message, 0,
&noauth_info->client_name,
&noauth_info->client_pac,
&noauth_info->client_creds, /* FAKE-EPAC */
&server,
&noauth_info->auth_info.authn_level,
&noauth_info->auth_info.authz_protocol,
0, 0, 0, 0);
}
PRIVATE unsigned32 rpc__dg_fwd_pkt (
rpc_dg_sock_pool_elt_p_t sp,
rpc_dg_recvq_elt_p_t rqe)
{
rpc_dg_pkt_hdr_p_t hdrp = rqe->hdrp;
rpc_if_id_t if_id;
unsigned32 rpc_prot_vers_major;
unsigned32 rpc_prot_vers_minor;
rpc_addr_p_t fwd_addr;
rpc_fwd_action_t fwd_action;
unsigned32 st;
/*
* First determine whether or not the pkt is for the forwarder server.
* There are a few approaches that could be taken. We can (a) filter
* based on interface id (i.e. if the pkt is for a interface that
* is supported by the forwarder server, including conv_, then we
* can handle it just like a normal pkt). We could (b) try to do
* something based on a combination of activity id and interface
* ids (e.g. is the pkt for an activity that we know about...). Lastly
* (perhaps) we could (c) see if we can find a forwarder match and
* if not then just handle it normally.
*
* For now we use method (c) since most pkts to the forwarder will
* be for forwarding not for operations on the forwarder. Note:
* NCS 1.5.1 RPC_C_DG_PT_ACK and RPC_C_DG_PT_REJECT pkts do not have
* a valid interface id so we just assume that they must be for the
* forwarder server (i.e. they couldn't have ever been forwarded).
* Also, a pkt with interface id nil is not valid so don't try to
* forward it.
*/
if (RPC_DG_HDR_INQ_PTYPE(hdrp) == RPC_C_DG_PT_ACK ||
RPC_DG_HDR_INQ_PTYPE(hdrp) == RPC_C_DG_PT_REJECT ||
UUID_IS_NIL(&hdrp->if_id, &st))
{
return (FWD_PKT_NOTDONE);
}
if_id.uuid = hdrp->if_id;
if_id.vers_major = RPC_IF_VERS_MAJOR(hdrp->if_vers);
if_id.vers_minor = RPC_IF_VERS_MINOR(hdrp->if_vers);
rpc_prot_vers_major = RPC_IF_VERS_MAJOR(RPC_C_DG_PROTO_VERS);
rpc_prot_vers_minor = RPC_IF_VERS_MINOR(RPC_C_DG_PROTO_VERS);
/*
* Invoke the endpoint mapper's registered forwarding map
* function to locate an appropriate forwarding addr.
*/
/* !!! RPC_UNLOCK_ASSERT(0); couldn't fix mainline com.h so forget it for now */
(* rpc_g_fwd_fn) (
&hdrp->object,
&if_id,
&ndr_g_transfer_syntax.id,
(rpc_protocol_id_t) RPC_C_PROTOCOL_ID_NCADG,
rpc_prot_vers_major,
rpc_prot_vers_minor,
(rpc_addr_p_t) &rqe->from,
&hdrp->actuid,
&fwd_addr,
&fwd_action,
&st);
if (st != rpc_s_ok)
{
RPC_DBG_GPRINTF(
("(rpc__dg_fwd_pkt) fwd map function returned error (st=%08lx, ptype=%s) [%s]\n",
st,
rpc__dg_pkt_name(RPC_DG_HDR_INQ_PTYPE(hdrp)),
rpc__dg_act_seq_string(hdrp)));
return (FWD_PKT_NOTDONE);
}
/*
* Do what we're told to do with this packet.
*/
switch (fwd_action)
{
case rpc_e_fwd_drop:
RPC_DBG_PRINTF(rpc_e_dbg_general, 10,
("(rpc__dg_forward_pkt) dropping (ptype=%s) [%s]\n",
rpc__dg_pkt_name(RPC_DG_HDR_INQ_PTYPE(hdrp)),
rpc__dg_act_seq_string(hdrp)));
return (FWD_PKT_NOTDONE);
case rpc_e_fwd_reject:
fwd_reject(sp, rqe);
return (FWD_PKT_DONE);
case rpc_e_fwd_forward:
fwd_forward(sp, rqe, fwd_addr);
return (FWD_PKT_DONE);
case rpc_e_fwd_delayed:
fwd_delayed(sp, rqe);
return(FWD_PKT_DELAYED);
default:
fprintf(stderr, "%s: unhandled fwd_action %d[%x]; aborting\n",
__PRETTY_FUNCTION__, fwd_action, fwd_action);
abort();
}
}
PRIVATE void rpc__dg_scall_orphan_call
(
rpc_dg_scall_p_t scall
)
{
RPC_LOCK_ASSERT(0);
RPC_DG_CALL_LOCK_ASSERT(&scall->c);
/*
* If for some reason we're already in the orphan state, just return.
*/
if (scall->c.state == rpc_e_dg_cs_orphan)
{
RPC_DBG_GPRINTF(("(rpc__dg_scall_orphan_call) already orphaned\n"));
return;
}
RPC_DBG_GPRINTF(("(rpc__dg_scall_orphan) Orphaning%s scall [%s]\n",
(scall->c.is_cbk ? " callback" : ""),
rpc__dg_act_seq_string(&scall->c.xq.hdr)));
if (! scall->c.is_cbk)
{
/*
* For a normal scall, Disassociate the selected call from the active
* call list (SCT).
*
* Note that the reference count of the SCALL is not decremented
* to zero in this routine. We do not want to free the SCALL until
* its associated resources have been freed in either the SCALL timer
* or upon return from the RPC manager routine.
*/
assert(scall->scte != NULL);
release_scall_from_scte(scall);
RPC_DG_SCT_RELEASE(&scall->scte);
}
else
{
/*
* For a callback scall we really can't do any dissociation to
* attempt to get a new call to run before the current callback
* completes. There is only one (client) thread that can run
* a new callback and it will be busy until the current one
* completes. If we did dissociate the cbk_scall from it's ccall,
* then the listener (do_cbk_request) would try to create and
* run another callback scall even though we're still running
* one; ouch!
*
* So the best we can do is try to encourage the callback to
* terminate. The end result is that a callback scall may exist
* in the orphaned state for a while AND be locatable by the
* listener while in this state, so the listener better be prepared
* to deal with this state.
*/
}
/*
* Common callback and normal scall processing.
*/
/*
* Now, set the call's state to "orphaned". It's resources will
* be cleaned up by the SCALL timer thread when all outstanding
* references are released. There may be up to three references
* to the SCALL at this point; the timer thread, the state reference
* (not held in the "idle" state, and possibly an orphan call
* executor reference. An orphan call executor reference is freed
* when the call returns from the server stub in execute_call().
* All other references are freed by the scall timer.
*/
RPC_DG_CALL_SET_STATE(&scall->c, rpc_e_dg_cs_orphan);
/*
* Wake the call executor thread to tell it that it is time to go
* away. The signal_failure() routine will set the orphaned thread's
* common call handle (CALL) status to an error condition so that
* an error will be detected when the executor thread waiting on
* the transmit or receive queue wakes up. This will guarantee that
* the pending recv and xmit operations are not performed and the
* call executor thread will exit to the stubs for fault processing.
*/
rpc__dg_call_signal_failure(&scall->c, rpc_s_call_orphaned);
/*
* Let's lose this call. Is it queued?
*/
if (rpc__cthread_dequeue(&scall->c.c))
{
/*
* Call is queued dequeueit and release the logical reference
* from the call executor (actually from the call executor
* queue).
*/
assert(scall->c.refcnt >= 2);
rpc__dg_pkt_cancel_reservation(&scall->c);
scall->has_call_executor_ref = false;
RPC_DG_SCALL_RELEASE_NO_UNLOCK(&scall);
}
else
{
/*
* Call not queued--cancel the call execution thread in an attempt
* to achieve a more timely manager termination. The posting
* of this cancel must follow the behavour for normal cancels
* (i.e. it must not be posted 'too soon' or 'too late' and it
* must be flushed at the end of the call). Note, we're using
* this even for cbk_scall's (i.e. the original client thread)
* - see rpc__dg_call_local_cancel() for more info; kinda scary,
* huh?
*/
rpc__cthread_cancel(&scall->c.c);
}
}
INTERNAL boolean32 scall_uncache
(
rpc_dg_scall_p_t scall
)
{
unsigned32 st;
boolean b;
RPC_TRY_LOCK(&b);
if (! b)
{
RPC_DBG_GPRINTF(("(scall_uncache) couldn't get global lock\n"));
return false;
}
RPC_DG_CALL_LOCK_ASSERT(&scall->c);
assert(scall->c.state == rpc_e_dg_cs_idle || scall->c.state == rpc_e_dg_cs_orphan);
if (scall->c.is_cbk)
{
/*
* This is a *client side* callback scall; dissociate from our
* cbk_ccall if necessary.
*/
if (scall->cbk_ccall != NULL)
{
rpc_dg_ccall_p_t ccall = scall->cbk_ccall;
assert(ccall->cbk_scall == scall);
/*
* Acquire the callback ccall lock. Note the locking hierarchy
* for this type of call handle pairing is: cbk_ccall, is_cbk scall
* (see dg.h).
*/
RPC_DG_CALL_TRY_LOCK(&ccall->c, &b);
if (! b)
{
RPC_DBG_GPRINTF(
("(scall_uncache) couldn't get cbk_scall->cbk_ccall lock\n"));
RPC_UNLOCK(0);
return false;
}
ccall->cbk_start = false;
RPC_DG_CCALL_RELEASE(&scall->cbk_ccall);
RPC_DG_SCALL_RELEASE_NO_UNLOCK(&ccall->cbk_scall);
}
}
else
{
/*
* This is a normal (server side) scall.
*/
/*
* If this server side scall has been part of a callback back
* to the client, free up the cached *server side* callback ccall
* resources.
*/
if (scall->cbk_ccall != NULL)
{
rpc_dg_ccall_p_t ccall = scall->cbk_ccall;
assert(ccall->cbk_scall == scall);
/*
* Acquire the callback ccall lock. Note the locking hierarchy
* for this type of call handle pairing is: scall, is_cbk ccall
* (see dg.h).
*/
RPC_DG_CALL_LOCK(&ccall->c);
rpc__dg_ccall_free_prep(ccall);
/*
* Release the reference the CCALL has to its originating SCALL.
*/
RPC_DG_SCALL_RELEASE_NO_UNLOCK(&ccall->cbk_scall);
/*
* Release the reference the SCALL has to the CCALL it used for
* the callback. Then call free_handle, which will stop the
* timer and release the client binding handles reference to
* the CCALL.
*/
RPC_DG_CCALL_RELEASE(&scall->cbk_ccall);
RPC_BINDING_RELEASE((rpc_binding_rep_p_t *) &ccall->h, &st);
}
/*
* Dissociate the scall from its scte if necessary. Presumably,
* the only time that the scall won't have a scte is if the call
* had been orphaned, though we don't count on that.
*/
if (scall->scte != NULL)
{
release_scall_from_scte(scall);
/*
* Release the SCALL's reference to the SCTE.
*/
RPC_DG_SCT_RELEASE(&scall->scte);
}
}
/*
* Common scall uncache processing.
*/
RPC_DBG_PRINTF(rpc_e_dbg_general, 3,
("(scall_uncache) Freeing cached SCALL [%s]\n",
rpc__dg_act_seq_string(&scall->c.xq.hdr)));
/*
* Dissociate the scall from the server binding handle if necessary.
*/
if (scall->h != NULL)
{
RPC_DG_SCALL_RELEASE_NO_UNLOCK(&scall->h->scall);
RPC_BINDING_RELEASE((rpc_binding_rep_p_t *) &scall->h, &st);
}
/*
* Stop the scall's timer and dissociate it from the scall.
*/
rpc__timer_clear(&scall->c.timer);
RPC_DG_SCALL_RELEASE(&scall);
RPC_UNLOCK(0);
return true;
}
PUBLIC void twr_np_lower_flrs_to_sa
(
byte_p_t tower_octet_string,
sockaddr_p_t *sa,
unsigned32 *sa_len,
unsigned32 *status
)
{
unsigned8 id;
byte_p_t tower;
unsigned16 count,
floor_count,
id_size,
addr_size;
unsigned32 length;
char *p;
CODING_ERROR (status);
RPC_VERIFY_INIT ();
id_size = 0;
/*
* Make sure we have a pointer to some data structure.
*/
if ( !(tower = tower_octet_string))
{
*status = twr_s_unknown_tower;
return;
}
RPC_DBG_GPRINTF(("(twr_np_lower_flrs_to_sa) called\n"));
/*
* Get the tower floor count
*/
memcpy ((char *)&floor_count, (char *)tower, TWR_C_TOWER_FLR_COUNT_SIZE);
RPC_RESOLVE_ENDIAN_INT16 (floor_count);
tower += TWR_C_TOWER_FLR_COUNT_SIZE;
/*
* Skip over the (application's) upper floors while we look for the
* beginning of the np-specific lower floors.
*/
for ( count = 0; count < floor_count; count++ )
{
/*
* Get the length of this floor's protocol id field (don't advance
* the pointer).
*/
memcpy ((char *)&id_size, (char *)tower,
TWR_C_TOWER_FLR_LHS_COUNT_SIZE);
RPC_RESOLVE_ENDIAN_INT16 (id_size);
/*
* Get the protocol id (don't advance the pointer).
* Expect one byte; no need to convert.
*/
memcpy ((char *)&id, (char *)(tower + TWR_C_TOWER_FLR_LHS_COUNT_SIZE),
TWR_C_TOWER_PROT_ID_SIZE);
/*
* See if we support the protocol id.
*/
if ( (id_size == TWR_C_TOWER_PROT_ID_SIZE) &&
(id == TWR_C_FLR_PROT_ID_NP))
{
/*
* Indicate we found the beginning of the np floors.
*/
*status = twr_s_ok;
break;
}
else
{
/*
* Skip this floor. Get the address size in order
* to know how much to skip.
*/
memcpy ((char *)&addr_size,
(char *)(tower + TWR_C_TOWER_FLR_LHS_COUNT_SIZE +
id_size), TWR_C_TOWER_FLR_RHS_COUNT_SIZE);
RPC_RESOLVE_ENDIAN_INT16 (addr_size);
tower += TWR_C_TOWER_FLR_LHS_COUNT_SIZE + id_size +
TWR_C_TOWER_FLR_RHS_COUNT_SIZE + addr_size;
/*
* For now, assume we don't find the floors we're looking for.
*/
*status = twr_s_unknown_tower;
}
}
if (*status != twr_s_ok)
{
return;
}
/*
* Skip the floor's protocol id field length and protocol id
* (now move the pointer). We already know it's
* TWR_C_FLR_PROT_ID_NP.
*/
tower += (TWR_C_TOWER_FLR_LHS_COUNT_SIZE + id_size);
/*
* Allocate space for sockaddr
*/
length = sizeof(struct sockaddr_un);
RPC_MEM_ALLOC (
*sa,
sockaddr_p_t,
length,
RPC_C_MEM_SOCKADDR,
RPC_C_MEM_WAITOK );
*sa_len = length;
/*
* make sure unused bytes are null
*/
memset ((char *) *sa, 0, length);
/*
* define this as an internet family socket
*/
((struct sockaddr_un *)(*sa))->sun_family = RPC_C_NAF_ID_UXD;
/*
* Get the length of pipe name
*/
memcpy ((char *)&addr_size, (char *)tower, RPC_C_TOWER_FLR_RHS_COUNT_SIZE);
RPC_RESOLVE_ENDIAN_INT16 (addr_size);
tower += RPC_C_TOWER_FLR_RHS_COUNT_SIZE;
/*
* Copy the pipe name to the sockaddr
*/
tower[addr_size - 1] = '\0';
addr_size += RPC_C_NP_DIR_LEN + 1;
if ((size_t)addr_size + 1 > sizeof(((struct sockaddr_un *)(*sa))->sun_path))
{
*status = rpc_s_no_memory;
RPC_MEM_FREE (*sa, RPC_C_MEM_SOCKADDR);
return;
}
snprintf(((struct sockaddr_un *)(*sa))->sun_path, length, "%s/%s",
RPC_C_NP_DIR, tower);
for (p = ((struct sockaddr_un *)(*sa))->sun_path; *p != '\0'; p++)
{
if (*p == '\\')
*p = '/';
}
*status = twr_s_ok;
/* For now, disregard the NetBIOS address. */
}
PUBLIC void twr_np_lower_flrs_from_sa
(
sockaddr_p_t sa,
twr_p_t *lower_flrs,
unsigned32 *status
)
{
unsigned8 protocol_id[TWR_C_NUM_NP_LOWER_FLRS];
unsigned16 id_size = TWR_C_TOWER_PROT_ID_SIZE,
floor_count,
related_data_size[TWR_C_NUM_NP_LOWER_FLRS],
twr_rep_16;
unsigned32 count,
twr_t_length;
byte_p_t related_data_ptr[TWR_C_NUM_NP_LOWER_FLRS],
tmp_tower;
char hostname[MAXHOSTNAMELEN], *p;
CODING_ERROR (status);
RPC_VERIFY_INIT ();
RPC_DBG_GPRINTF(("(twr_np_lower_flrs_from_sa) called\n"));
if (sa->family == RPC_C_NAF_ID_UXD)
{
protocol_id[0] = TWR_C_FLR_PROT_ID_NP;
protocol_id[1] = TWR_C_FLR_PROT_ID_NB;
}
else
{
*status = twr_s_unknown_sa;
return;
}
/*
* Since we now know the socket address we're dealing with,
* collect the sizes of each field to allocate memory, and
* remember the pointers to the fields so we can copy the
* data once we have allocated the tower string.
*/
floor_count = TWR_C_NUM_NP_LOWER_FLRS;
/*
* related_data[0] contains the pipe name (eg. \PIPE\lsass)
*/
related_data_ptr[0] = (unsigned char*) ((struct sockaddr_un *)sa)->sun_path;
if (strncmp((char*) related_data_ptr[0], (char*) RPC_C_NP_DIR"/", RPC_C_NP_DIR_LEN + 1) == 0)
{
/* Path is relative, but do not chop off first /. */
related_data_ptr[0] += RPC_C_NP_DIR_LEN;
}
related_data_size[0] = strlen((char*) related_data_ptr[0]) + 1;
/*
* related_data[1] contains the NetBIOS name (eg. \\MYSERVER)
*/
hostname[0] = '\\';
hostname[1] = '\\';
gethostname(&hostname[2], MAXHOSTNAMELEN - 3);
hostname[MAXHOSTNAMELEN - 1] = '\0';
for (p = &hostname[2]; *p != '\0'; p++)
*p = toupper((int)*p);
related_data_size[1] = strlen(hostname) + 1;
related_data_ptr[1] = (unsigned char*) hostname;
/*
* Calculate the length of the tower floors.
*/
twr_t_length = TWR_C_TOWER_FLR_COUNT_SIZE; /* to store floor count */
for ( count = 0; count < floor_count; count++ )
{
twr_t_length += TWR_C_FLR_OVERHEAD;
twr_t_length += related_data_size[count];
}
/*
* Next allocate space for the tower structure
*/
RPC_MEM_ALLOC (
*lower_flrs,
twr_p_t,
sizeof (twr_t) + (twr_t_length - 1),
RPC_C_MEM_TOWER,
RPC_C_MEM_WAITOK );
/*
* Copy the length of the tower octet string into the tower structure
*/
(*lower_flrs)->tower_length = twr_t_length;
/*
* Copy the floor information into the tower octet string
*/
/*
* Use a temporary for the octet string since we need
* to increment the pointer.
*/
tmp_tower = (*lower_flrs)->tower_octet_string;
/*
* Copy the number of floors into the tower octet string
*/
twr_rep_16 = floor_count;
RPC_RESOLVE_ENDIAN_INT16 (twr_rep_16);
memcpy ((char *)tmp_tower, (char *)&twr_rep_16,
TWR_C_TOWER_FLR_COUNT_SIZE);
tmp_tower += TWR_C_TOWER_FLR_COUNT_SIZE;
/*
* Convert the protocol identifier size to its proper
* representation for use in the following loop.
*/
RPC_RESOLVE_ENDIAN_INT16 (id_size);
for ( count = 0; count < floor_count; count++ )
{
/*
* Copy the length of the protocol identifier field into
* tower octet string. (Converted before the loop.)
*/
memcpy ((char *)tmp_tower, (char *)&id_size,
TWR_C_TOWER_FLR_LHS_COUNT_SIZE);
tmp_tower += TWR_C_TOWER_FLR_LHS_COUNT_SIZE;
/*
* Copy the protocol identifier into tower octet string
* (1 byte so no need to convert endian representation).
*/
memcpy ((char *)tmp_tower, (char *)&(protocol_id[count]),
TWR_C_TOWER_PROT_ID_SIZE);
tmp_tower += TWR_C_TOWER_PROT_ID_SIZE;
/*
* Copy the length of the address data field into
* tower octet string.
*/
twr_rep_16 = related_data_size[count];
RPC_RESOLVE_ENDIAN_INT16 (twr_rep_16);
memcpy ((char *)tmp_tower, (char *)&twr_rep_16,
TWR_C_TOWER_FLR_RHS_COUNT_SIZE);
tmp_tower += TWR_C_TOWER_FLR_RHS_COUNT_SIZE;
/*
* If there is addressing data, copy the address data field into
* tower octet string
*/
if (related_data_size[count])
{
memcpy ((char *)tmp_tower, (char *)related_data_ptr[count],
related_data_size[count]);
/* Convert slashes */
for (p = (char*) tmp_tower; *p != '\0'; p++) {
if (*p == '/')
*p = '\\';
}
/*
* Set up for the next floor.
*/
tmp_tower += related_data_size[count];
}
}
*status = twr_s_ok;
}
PRIVATE void rpc__dg_execute_call
(
dce_pointer_t scall_,
boolean32 call_was_queued ATTRIBUTE_UNUSED
)
{
ndr_format_t drep;
unsigned32 st, reject_st;
boolean broadcast;
boolean idem = false;
boolean maybe;
boolean sent_response;
boolean called_stub;
rpc_dg_scall_p_t scall = (rpc_dg_scall_p_t) scall_;
rpc_dg_pkt_hdr_p_t hdrp;
rpc_iovector_elt_t iove;
rpc_dg_recvq_elt_p_t rqe;
unsigned16 ihint;
rpc_dg_binding_server_p_t h;
rpc_v2_server_stub_epv_t ss_epv;
rpc_mgr_epv_t mgr_epv;
rpc_if_rep_p_t ifspec;
idl_uuid_t type;
int force_way_auth;
rpc_key_info_p_t key_info;
rpc_dg_auth_epv_p_t auth_epv;
unsigned16 opnum;
unsigned32 flags;
unsigned32 max_calls;
unsigned32 max_rpc_size;
rpc_if_callback_fn_t if_callback;
int prev_cancel_state;
/*
* All of this code (99% of which is never executed) is in the fast path.
*
* NOTE: This routine is responsible for sending back a correct
* cancel pending status to the client under all conditions
* (to ensure that cancels don't get lost - i.e. forwarded to the
* server, accepted, not delivered and then not reported as
* a cancel pending).
*
* Any "reject response" to the client must be robust (at least for
* Non-Idempotent calls). This is necessary because the client may
* have already received a fack causing it to free some pkts that it
* would need to "rerun" the call (assuming the stub was never entered)
* in the event that a reject was lost.
*
* Client's recover from lost responses to idempotent calls (including
* proper cancel pending resetting) so we don't have to worry about
* being robust in this situation.
*/
/*
* The caller of this routine is responsible for handing off a
* call *reference* to us. We will release our reference when
* we're done.
*/
RPC_DG_CALL_LOCK_ASSERT(&scall->c);
/*
* We are now executing.
*/
scall->call_is_queued = false;
/*
* Initialize the iove, since in any failure case (i.e. orphan),
* it may not be updated correctly; subsequent logic depends on freeing
* things based on the proper state of the iove.
*/
iove.buff_dealloc = NULL;
/*
* Initialize the "called_stub" flag to false. If a call gets
* rejected, and never enters the stub routine, it's up to us to
* free the request RQE.
*/
called_stub = false;
/*
* Initialize the "sent call response" flag to indicate a failure.
* This is necessary so that failures resulting in END_OF_CALL
* end up transitioning to the proper call state when we wrap-up
* call processing (at the end of this routine).
*/
sent_response = false;
/*
* Before continuing, it's likely that the call has been "opened
* up" (due to a unlock/lock around call executor handoff) and we
* need to check if it is safe to continue...
*/
if (scall->c.state != rpc_e_dg_cs_recv)
goto END_OF_CALL;
/*
* If this call does not yet have a reservation, make one now. Any
* call that was queued will not have a reservation; also, even if
* a executor thread was initially available for the call, there
* might not have been any reservations available at that time.
* (Note that the call to make the reservation may block until a
* reservation becomes available.)
*
* The make_reservation routine requires that the global lock be
* held. To respect the locking heirarchy, we need to juggle the
* locks around a little, checking that the state of the call doesn't
* change during the times when it's unlocked.
*/
if (scall->c.n_resvs < scall->c.max_resvs)
{
RPC_DG_CALL_UNLOCK(&scall->c);
RPC_LOCK(0);
RPC_DG_CALL_LOCK(&scall->c);
if (scall->c.state != rpc_e_dg_cs_recv)
{
RPC_UNLOCK(0);
goto END_OF_CALL;
}
/*
* We always start with the maximum reservation because we no longer
* reset high_rcv_frag_size and snd_frag_size between the calls.
* (The previous call may have used/advertised the larger fragment
* size.)
*
* This is fine in the user space since the packet rationing will
* never happen. (We assume that there are always enough packet
* buffers available.)
*
* This may accelerate the packet rationing in the kernel, though
* (iff MBF is turned on). Unfortunately, we can't start with the
* minimum reservation in the kernel because the other end may be a
* user space.
*/
rpc__dg_pkt_adjust_reservation(&scall->c, scall->c.max_resvs, true);
RPC_UNLOCK(0);
/*
* Since the call's been opened up, we need to check its status.
*/
if (scall->c.state != rpc_e_dg_cs_recv)
{
RPC_DBG_GPRINTF((
"(rpc__dg_execute_call) Cancelled while awaiting pkt reservation\n"));
goto END_OF_CALL;
}
/*
* Since this call did not have a reservation, any data received for
* it was dropped, and the client was told not to send any more.
* Since the call can now receive data, prod the client into
* retransmitting.
*/
rpc__dg_call_xmit_fack(&scall->c, NULL, ! scall->c.rq.recving_frags);
}
/*
* Now's as good a time as any to enable direct cancel posting to
* the thread (while we've got the call lock held). It might have
* been nice to defer this to just before the sstub dispatch, but
* then we'd have to re-acquire the call lock.
*
* NOTE: This routine MUST call rpc_cthread_cancel_caf() before
* returning (regardless of the return path)! This requirement
* exists because cancels may be (become) pending at any time and
* must be flushed (otherwise subsequent calls using this thread
* will inherit this call's cancel).
*/
rpc__cthread_cancel_enable_post(&scall->c.c);
/*
* Create a server binding handle, if we don't already have one hanging
* off the scall. If we have a cached one, reinit it.
*/
if (scall->h != NULL)
{
h = scall->h;
RPC_DG_BINDING_SERVER_REINIT(h);
}
else
{
rpc_addr_p_t addr;
rpc__naf_addr_copy(scall->c.addr, &addr, &st);
h = (rpc_dg_binding_server_p_t) rpc__binding_alloc
(true, &scall->c.call_object, RPC_C_PROTOCOL_ID_NCADG, addr, &st);
if (st != rpc_s_ok)
{
RPC_DBG_GPRINTF((
"(rpc__dg_execute_call) Can't allocate binding, st = 0x%x\n", st));
goto END_OF_CALL;
}
RPC_DG_CALL_REFERENCE(&scall->c);
h->scall = scall;
if (!scall->c.is_cbk)
{
key_info = scall->scte->key_info;
if (key_info != NULL)
{
rpc_auth_info_p_t auth_info = key_info->auth_info;
h->c.c.auth_info = auth_info;
RPC_DG_AUTH_REFERENCE(auth_info); /* for the handle */
}
}
scall->h = h;
}
assert(RPC_DG_CALL_IS_SERVER(&scall->c));
/*
* Dequeue the first pkt off of the receive queue (including it's hdr).
*
* WARNING: we MUST use comm_receive_int() because comm_receive(),
* while it would do the locking for us, doesn't return a useable iove
* for 0 length data.
*
* We're supposed to be in the init state until we know we're accepting
* the call (that means after a WAY callback if one is necessary).
* Make certain this is the case following the receive.
*
* WARNING 2: Note that this call verifies the authenticity of the
* packet it reads *except* in two cases:
*
* - When the packet is from a call on an activity the server doesn't
* currently know about (in which case we notice later on that the
* authn_proto field in the header is non-zero).
*
* - When the authentication check fails with a status code of
* "rpc_s_dg_need_way_auth". Note that in this event, the
* "receive_int" is still viewed as having succeeded, albeit with
* a non-zero status code.
*
* In either of these cases, a way_auth callback is made, and,
* if it is successful, the authenticity check is retried
* (further down in this function).
*/
rpc__dg_call_receive_int(&scall->c, &iove, &st);
force_way_auth = false;
if (st == rpc_s_dg_need_way_auth) {
RPC_DBG_PRINTF(rpc_e_dbg_general, 4,
("(rpc__dg_execute_call) will force way callback\n"));
st = rpc_s_ok;
/*
* We don't own the rqe. It's still on recvq.
*/
force_way_auth = true;
}
else if (st != rpc_s_ok)
{
RPC_DBG_GPRINTF((
"(rpc__dg_execute_call) Receive failed st = 0x%x\n", st));
goto END_OF_CALL;
}
rqe = RPC_DG_RECVQ_ELT_FROM_IOVECTOR_ELT(&iove);
assert(rqe != NULL && rqe->hdrp != NULL);
hdrp = rqe->hdrp;
idem = ((hdrp->flags & RPC_C_DG_PF_IDEMPOTENT) != 0);
broadcast = ((hdrp->flags & RPC_C_DG_PF_BROADCAST) != 0);
maybe = ((hdrp->flags & RPC_C_DG_PF_MAYBE) != 0);
if (scall->c.is_cbk)
{
RPC_DBG_PRINTF(rpc_e_dbg_general, 3,
("(rpc__dg_execute_call) Callback [%s]\n",
rpc__dg_act_seq_string(hdrp)));
}
/*
* Perform some of the request pkt verification that was defered.
* This includes interface id and operation number.
*/
if (!scall->c.is_cbk)
key_info = scall->scte->key_info;
else
key_info = NULL;
/*
* Does the request specify authentication, do we not have auth info
* yet, is the call not "maybe", and is this not a callback (!!!
* for the callback case)? If so, then get the auth info now.
*/
if (hdrp->auth_proto != 0 &&
key_info == NULL &&
! maybe &&
! scall->c.is_cbk)
{
rpc_authn_protocol_id_t authn_protocol;
rpc_auth_info_p_t auth_info;
assert(scall->c.key_info == NULL);
/*
* Get the appropiate DG auth EPV. We need to convert the wire
* auth protocol ID into the corresponding API value and then
* get the EPV using that latter value.
*/
authn_protocol = rpc__auth_cvt_id_wire_to_api(hdrp->auth_proto, &st);
if (st != rpc_s_ok)
{
reject_st = rpc_s_unknown_reject;
goto AFTER_CALL_TO_STUB;
}
auth_epv = (rpc_dg_auth_epv_p_t)
rpc__auth_rpc_prot_epv
(authn_protocol, RPC_C_PROTOCOL_ID_NCADG);
if (auth_epv == NULL)
{
reject_st = rpc_s_unknown_reject;
goto AFTER_CALL_TO_STUB;
}
/*
* Call into auth service to create an auth info.
*
* This generates an auth_info and a key_info. The auth_info
* gets attached to the handle, while the key_info gets
* attached to the scte and scall.
*/
key_info = (*auth_epv->create) (&st);
if (st != rpc_s_ok)
{
reject_st = rpc_s_unknown_reject;
goto AFTER_CALL_TO_STUB;
}
scall->c.key_info = key_info;
scall->c.auth_epv = auth_epv;
/* we have one reference to the key_info already. */
scall->scte->key_info = key_info;
scall->scte->auth_epv = auth_epv;
RPC_DG_KEY_REFERENCE(key_info); /* for the scte */
/* fill in the auth_info in the handle */
auth_info = key_info->auth_info;
h->c.c.auth_info = auth_info;
RPC_DG_AUTH_REFERENCE(auth_info); /* for the handle */
}
auth_epv = scall->c.auth_epv;
/*
* If the interface isn't valid, send a rejection.
*/
rpc_object_inq_type(&scall->c.call_object, &type, &st);
if (! (st == rpc_s_ok || st == rpc_s_object_not_found))
{
RPC_DBG_GPRINTF((
"(rpc__dg_execute_call) rpc_object_inq_type failed, st=0x%x [%s]\n",
st, rpc__dg_act_seq_string(hdrp)));
reject_st = st;
goto AFTER_CALL_TO_STUB;
}
ihint = hdrp->ihint;
rpc__if_lookup2 (&hdrp->if_id, hdrp->if_vers, &type,
&ihint, &ifspec, &ss_epv, &mgr_epv,
&flags, &max_calls, &max_rpc_size,
&if_callback, &st);
if (st != rpc_s_ok)
{
RPC_DBG_GPRINTF((
"(rpc__dg_execute_call) rpc__if_lookup failed, st=0x%x [%s]\n",
st, rpc__dg_act_seq_string(hdrp)));
reject_st = st;
goto AFTER_CALL_TO_STUB;
}
/*
* The interface is valid, update the call ihint so we tell the client.
*/
scall->c.call_ihint = ihint;
/*
* Extract a copy of the opnum from the packet header, and check to see that
* it's appropriate for this interface.
*/
opnum = hdrp->opnum;
if (opnum >= ifspec->opcnt)
{
RPC_DBG_GPRINTF((
"(rpc__dg_execute_call) Opnum (%u) out of range [%s]\n",
opnum, rpc__dg_act_seq_string(hdrp)));
reject_st = rpc_s_op_rng_error;
goto AFTER_CALL_TO_STUB;
}
/*
* To guarantee at-most-once semantics for non-idempotent RPCs, we
* must ensure that the call is filtered based on a WAY validated
* sequence number. If we don't have such a sequence number, then
* call back to client to get one (the returned WAY validated seq
* must match this RPC's seq - i.e. it must be the RPC that the client
* is currently performing). Note that we may do a way_auth
* callback even when we wouldn't otherwise do it because the
* underlying authentication layers decided one was needed.
*
* The analogous processing for non-idempotent callbacks (from a
* server manager to the client originating the call, who needs to
* validate the callback's seq) was previously taken care of in the
* do_request() processing (a WAY validated logical scte high_seq
* was already known).
*
* Note also that maybe calls with large-INs are tagged as
* non-idempotent but do not need to be protected against re-runs.
* (The architecture specifies that maybe calls can *not* have
* at-most-once semantics, but the implementation finds it more
* convenient to use the non-idempotent code paths for handling
* calls with large-INs.) For this reason, avoid doing a WAY for
* maybe calls (the client may not even be still running!).
*
* Release and reacquire the call lock while performing this
* (slow path / lengthy) WAY and Auth processing.
*
* We perform the WAY RPC with general cancel delivery disabled.
* The RPC prologue is suppose to be transparent and clients can
* orphan the call if they get tired of waiting around.
*/
if (! maybe &&
(force_way_auth || key_info != NULL ||
(! idem && ! scall->c.is_cbk)))
{
if (!force_way_auth && RPC_DG_SCT_IS_WAY_VALIDATED(scall->scte))
{
/*
* We want to make this check because it's better to be safe
* than sorry regarding at-most-once semantics. It's
* conceivable that the connection became WAY validated *after*
* this call had passed it's initial filtering (if nothing
* else, it should protect us from other potential coding
* errors :-)
*/
if (scall->c.call_seq != scall->scte->high_seq)
{
RPC_DBG_PRINTF(rpc_e_dbg_general, 2,
("(execute_call) Old sequence, previous=%u [%s]\n",
scall->scte->high_seq, rpc__dg_act_seq_string(hdrp)));
goto END_OF_CALL;
}
}
else
{
boolean high_seq_was_way_validated =
(boolean)(scall->scte->high_seq_is_way_validated);
/*
* WAY validate the connection and ensure that this call
* is the current call. Unlock the scall while performing the
* WAY validation.
*/
rpc_dg_sct_elt_p_t scte;
RPC_DG_CALL_UNLOCK(&scall->c);
/*
* The WAY validation routine must be called with the connection
* unlocked. Due to locking hierarchy and the fact that we
* unlocked the scall, we've opened up a window... check if
* it's safe to continue.
*/
RPC_LOCK(0);
RPC_DG_CALL_LOCK(&scall->c);
if (scall->c.state != rpc_e_dg_cs_recv)
{
RPC_UNLOCK(0);
goto END_OF_CALL;
}
scte = scall->scte;
RPC_DG_CALL_UNLOCK(&scall->c);
rpc__dg_sct_way_validate(scte, force_way_auth, &st);
RPC_UNLOCK(0);
RPC_DG_CALL_LOCK(&scall->c);
/*
* Before continuing, we've "opened up" the call (due to
* the unlock/lock) and we need to check if it is safe to
* continue...
*/
if (scall->c.state != rpc_e_dg_cs_recv)
goto END_OF_CALL;
if (st != rpc_s_ok)
{
reject_st = rpc_s_who_are_you_failed;
goto AFTER_CALL_TO_STUB;
}
else
{
if (scall->c.call_seq != scall->scte->high_seq)
{
RPC_DBG_PRINTF(rpc_e_dbg_general, 2,
("(rpc__dg_execute_call) Old sequence, previous=%u [%s]\n",
scall->scte->high_seq, rpc__dg_act_seq_string(hdrp)));
goto END_OF_CALL;
}
}
/*
* If high_seq_was_way_validated, rpc__dg_call_receive_int()
* has already verified the packet by calling
* (*auth_epv->recv_ck)().
* It's ok to call it again here except when using
* pkt_privacy where the packet body is already decrypted.
* For consistency, we don't verify the packet if it's
* already done.
*/
if (key_info != NULL && !force_way_auth
&& !high_seq_was_way_validated)
{
unsigned32 blocksize = auth_epv->blocksize;
char *cksum;
int raw_bodysize;
/*
* This must be a single buffer fragment.
* The very first fragment!
*/
if (rqe->hdrp == NULL || rqe->frag_len != rqe->pkt_len)
{
reject_st = rpc_s_who_are_you_failed;
goto AFTER_CALL_TO_STUB;
}
/*
* It's not really necessary to round up the packet body
* length here because the sender includes the length of
* padding before the auth trailer in the packet body length.
* However, I think, that's a wrong behavior and we shouldn't
* rely on it.
*/
raw_bodysize = ((rqe->hdrp->len + blocksize - 1)
/ blocksize) * blocksize;
/*
* Now that we have obtained authentication
* credentials, go back and verify that cksum is
* entirely contained inside the packet, and the
* auth_type is what we expected. This "shouldn't
* fail" unless someone's playing games with us.
*/
if (((RPC_C_DG_RAW_PKT_HDR_SIZE + raw_bodysize +
auth_epv->overhead) > rqe->frag_len) ||
(rqe->hdrp->auth_proto != auth_epv->auth_proto))
{
st = nca_s_proto_error;
}
else
{
/*
* Adjust the packet buffer's pkt_len,
* i.e., excluding the auth trailer.
* Also adjust data_len in the iovector.
*/
rqe->pkt_len = raw_bodysize + RPC_C_DG_RAW_PKT_HDR_SIZE;
iove.data_len = raw_bodysize;
cksum = rqe->pkt->body.args + raw_bodysize;
RPC_DBG_PRINTF(rpc_e_dbg_general, 4,
("(rpc__dg_execute_call) calling recv_ck now\n"));
(*auth_epv->recv_ck) (key_info, rqe, cksum, &st);
}
if (st != rpc_s_ok)
{
RPC_DBG_PRINTF(rpc_e_dbg_general, 2,
("(rpc__dg_execute_call) pkt didn't verify -- %x\n", st));
reject_st = rpc_s_who_are_you_failed;
goto AFTER_CALL_TO_STUB;
}
}
else if (key_info != NULL && force_way_auth)
{
/*
* Call rpc__dg_call_receive_int() again. This time,
* (*auth_epv->recv_ck)() is supposed to succeed.
*/
rpc__dg_call_receive_int(&scall->c, &iove, &st);
force_way_auth = false;
if (st == rpc_s_dg_need_way_auth) {
/*
* We still don't own the rqe...
*/
force_way_auth = true;
}
if (st != rpc_s_ok)
{
RPC_DBG_GPRINTF((
"(rpc__dg_execute_call) Receive failed st = 0x%x after forced WAY auth callback\n", st));
reject_st = rpc_s_who_are_you_failed;
goto AFTER_CALL_TO_STUB;
}
assert(rqe == RPC_DG_RECVQ_ELT_FROM_IOVECTOR_ELT(&iove));
}
}
}
assert(force_way_auth == false);
/*
* If we get here, we're accepting the call and we're gonna dispatch
* to the server stub! Setup the required args for the dispatch
* (the iove was done above) and run call the server stub.
*/
RPC_DG_HDR_INQ_DREP(&drep, hdrp);
/*
* The packet rationing code needs to know that we no longer need
* to worry about doing WAYs.
*/
scall->c.rq.is_way_validated = true;
/*
* Unlock the call lock while in the stub.
*/
RPC_DG_CALL_UNLOCK(&scall->c);
/*
* Note: the stubs are absolutely, positively required to free the
* provided iove described buffer (assuming the len > 0), even if
* the stub detects and returns an error condition. Set the
* "called_stub" flag to true so that we know we don't have to worry
* about freeing the RQE ourselves.
*/
called_stub = true;
/*
* As required by the packet rationing rules, if the I/O vector element
* has no data, free it up now because the server stub doesn't bother
* to free such elements. Note that we needed the element until
* now for the info that was in its packet header.
*/
if (iove.data_len == 0 && iove.buff_dealloc != NULL)
RPC_FREE_IOVE_BUFFER(&iove);
switch (ifspec->stub_rtl_if_vers)
{
/*
* If this is an old v0 or v1 stub runtime interface. Do the
* dirty work out of line.
*/
case RPC_C_STUB_RTL_IF_VERS_NCS_1_0:
case RPC_C_STUB_RTL_IF_VERS_NCS_1_5:
if (rpc_g_dg_pre_v2_server_call_p == NULL)
{
/*
* rpc_m_pre_v2_ss
* "(%s) Can't handle pre-v2 server stubs"
*/
rpc_dce_svc_printf (
__FILE__, __LINE__,
"%s",
rpc_svc_server_call,
svc_c_sev_fatal | svc_c_action_abort,
rpc_m_pre_v2_ss,
"rpc__dg_execute_call" );
}
prev_cancel_state = dcethread_enableinterrupt_throw(0);
(*rpc_g_dg_pre_v2_server_call_p)(
ifspec,
opnum,
(handle_t) h,
(rpc_call_handle_t) scall,
&iove,
drep,
ss_epv,
mgr_epv,
&reject_st);
dcethread_enableinterrupt_throw(prev_cancel_state);
break;
/*
* This is the v2 (new) stub runtime interface.
*/
case RPC_C_STUB_RTL_IF_VERS_DCE_1_0:
prev_cancel_state = dcethread_enableinterrupt_throw(0);
(*(ss_epv[opnum]))(
(handle_t) h,
(rpc_call_handle_t) scall,
&iove,
&drep,
&ndr_g_transfer_syntax,
mgr_epv,
&reject_st);
dcethread_enableinterrupt_throw(prev_cancel_state);
break;
/*
* Unknown version
*/
default:
RPC_DBG_GPRINTF((
"(rpc__dg_execute_call) Unknown rtl/if version. 0x%x\n",
ifspec->stub_rtl_if_vers));
RPC_DG_CALL_LOCK(&scall->c);
if (iove.buff_dealloc != NULL)
RPC_FREE_IOVE_BUFFER(&iove);
goto END_OF_CALL;
}
/*
* While the stub may have returned due to call orphaning, this will
* not typically be the case. Even if it completed succesfully
* we could become orphaned further down in this processing (e.g.
* in xmitq_push). Defer orphan checking and cleanup till we only
* have to do it once; the extra work done if we are orphaned won't
* kill us.
*/
/*
* Acquire the call lock since we need it for several pieces of
* processing from here on in.
*
* Before continuing, we've "opened up" the call (due to the
* unlock/lock) and we need to check if it is safe to continue...
*/
RPC_DG_CALL_LOCK(&scall->c);
if (scall->c.state != rpc_e_dg_cs_recv
&& scall->c.state != rpc_e_dg_cs_xmit)
{
goto END_OF_CALL;
}
/*
* Error cases detected before we get to calling the stub and that want
* to send a "reject" re-enter here.
*/
AFTER_CALL_TO_STUB:
RPC_DG_CALL_LOCK_ASSERT(&scall->c);
/*
* If this was a broadcast request and we're either rejecting the call
* or the call faulted, just skip to the end.
*/
if (broadcast &&
(reject_st != rpc_s_ok ||
RPC_DG_HDR_INQ_PTYPE(&scall->c.xq.hdr) == RPC_C_DG_PT_FAULT))
{
goto END_OF_CALL;
}
/*
* The stub was obligated to call the iove's dealloc routine,
* so we don't have to free that. We don't need the recvq anymore.
* In normal cases, the list will already be empty, so having this
* in the fast path doesn't hurt and (in the error cases) it frees
* up resources while we potentially wait in xmitq_push() (or
* awaiting a xqe for a reject or no [outs] response).
*/
if (scall->c.rq.head != NULL)
rpc__dg_recvq_free(&scall->c.rq);
/*
* If a reject condition exists, prepare the reject response.
* Otherwise, handle the case where the stub has no [outs] and it's
* not a maybe call; we still need to generate a response pkt.
*
* We depend on both of these response queuing operations
* to only queue the response and not send it since we've yet
* setup the return cancel_pending status for the client.
*/
if (reject_st != rpc_s_ok)
{
/*
* If the reject path caused us to jump over the call into the
* stub, we need to free the request RQE here.
*
* If we are forced to do WAY auth and havn't done it so, don't free
* it because we don't own the rqe.
*/
if (! called_stub && !force_way_auth && iove.buff_dealloc != NULL)
RPC_FREE_IOVE_BUFFER(&iove);
queue_mapped_reject(scall, reject_st);
}
else
{
if (scall->c.state == rpc_e_dg_cs_recv && !maybe)
{
rpc_iovector_t xmit_data;
xmit_data.num_elt = 0;
rpc__dg_call_transmit_int(&scall->c, &xmit_data, &st);
/*
* The transmit may fail because the call is already orphaned.
* It may fail for some other reason as well. In either case,
* we're not gonna get a response to the client. Just keep
* falling through (other calls may fail as well) and clean up.
*/
}
}
/*
* At this point, we can stop accepting forwarded cancels. Determine
* the cancel pending disposition of the call and set the call's
* xq cancel_pending flag accordingly so that the response (or at
* least the last pkt of the response) gets sent with the proper
* state. This is the single point where the "send response"
* path ensures that it has flushed any pending cancels from the
* call executor thread; this includes cancels generated by
* a received cancel-request or a cancel induced by orphan call
* processing.
*
* We could have stopped accepting cancels as soon as the stub
* returned, but we really wanted to wait till here before setting
* up the return cancel_pending status. After this, we shouldn't
* screw around anymore with the xq (i.e. re-initing it). There
* should be a reject, fault or normal response queued up and
* it should go out with the correct cancel_pending flag.
* That is of course, unless that call has been orphaned, in which
* case no further response of any kind will be sent to the client
* (setting the cancel_pending flag will not affect the client;
* which is a *requirement* under this condition).
*/
if (rpc__cthread_cancel_caf(&scall->c.c))
{
RPC_DBG_PRINTF(rpc_e_dbg_cancel, 5,
("(rpc__dg_execute_call) setting cancel_pending\n"));
scall->c.xq.base_flags2 |= RPC_C_DG_PF2_CANCEL_PENDING;
}
/*
* Assuming that the call isn't already orphaned, finally push
* out the remainder of the response. The push may fail
* because orphaning occurs during the push or for some
* other reason; just continue to cleanup processing. Indicate
* whether or not the response was sent so we can determine
* the appropriate call state when we're done.
*/
if (scall->c.state != rpc_e_dg_cs_orphan)
{
rpc__dg_call_xmitq_push(&scall->c, &st);
if (st == rpc_s_ok)
sent_response = true;
else
RPC_DBG_GPRINTF((
"(rpc__dg_execute_call) xmitq_push returns 0x%x\n", st));
}
/*
* Error cases that want to skip the reply-sending machinery re-enter here.
*/
END_OF_CALL:
RPC_DG_CALL_LOCK_ASSERT(&scall->c);
/*
* End of the fast path.
*
* Any response has been sent (or at least all the pkts have been
* sent once). Perform final call wrap-up processing / state
* transitioning. In the event that we didn't take the send
* response path, we still need to flush any pending cancels.
* In the event that we took the send response path but the response
* wasn't succesfully sent, we'll call the following twice but
* that's ok.
*/
if (! sent_response)
(void) rpc__cthread_cancel_caf(&scall->c.c);
/*
* If the call is not "idempotent" we must defer complete end of
* call processing until the client's ack is received. (Note: "maybe"
* and "broadcast" are tagged as "idempotent".) For idempotent calls
* with small outs, we can clean up right now (if the client never
* gets the response, it can rerun the call).
*
* Idempotent calls with large outs are treated similarly to
* non-idempotent calls. We retain the outs until "acknowledged"
* by the client or the retransmit logic gives up. This is required
* to prevent the undesireable situation of the client receiving
* a "nocall" in response to a "ping" after the client has already
* received some of the outs.
*
* If we didn't (seemingly) successfully send a response, skip the
* final state (this covers orphan processing as well). Furthermore,
* if the call has been orphaned stay in that state.
*
* An orphaned call has already been disassociated from its SCTE
* (ccall in the case of a cbk_scall) and there should be a maximum
* of two references to the orphaned SCALL; the call executor's and
* the timer thread. The only actions required are to release any
* remaining resources held by the call and release one reference
* to the SCALL (the timer thread will eventually complete to job
* of destroying the scall).
*/
if ((! idem || RPC_DG_FLAG_IS_SET(scall->c.xq.base_flags, RPC_C_DG_PF_FRAG))
&& sent_response)
{
RPC_DG_CALL_SET_STATE(&scall->c, rpc_e_dg_cs_final);
}
else
{
/*
* It's really the end of the call, so we can free the xmitq.
*/
if (scall->c.xq.head != NULL)
rpc__dg_xmitq_free(&scall->c.xq, &scall->c);
/*
* Typically, the call goes back to the idle state, ready to
* handle the next call. First, If this was a callback, update
* the callback sequence number in the associated client callback
* handle.
*
* If the call was orphaned, we can't to do either of the above
* (we just want to let the scall's timer complete the job of
* destroying the scall).
*/
if (scall->c.state != rpc_e_dg_cs_orphan)
{
if (scall->c.is_cbk)
{
scall->cbk_ccall->c.high_seq = scall->c.call_seq;
}
RPC_DG_CALL_SET_STATE(&scall->c, rpc_e_dg_cs_idle);
}
}
/*
* Give up the packet reservation for this call.
*/
rpc__dg_pkt_cancel_reservation(&scall->c);
if (scall->c.is_cbk && scall->cbk_ccall != NULL)
{
/*
* Update the original ccall's high_rcv_frag_size and snd_frag_size.
*/
scall->cbk_ccall->c.rq.high_rcv_frag_size =
scall->c.rq.high_rcv_frag_size;
scall->cbk_ccall->c.xq.snd_frag_size = scall->c.xq.snd_frag_size;
}
/*
* We're now done with our scall lock/reference.
*/
scall->has_call_executor_ref = false;
RPC_DG_SCALL_RELEASE(&scall);
}
INTERNAL void queue_mapped_reject
(
rpc_dg_scall_p_t scall,
unsigned32 st
)
{
rpc_iovector_t iovec;
unsigned32 tst, mst;
switch ((int)st)
{
case rpc_s_who_are_you_failed:
mst = nca_s_who_are_you_failed; break;
case rpc_s_comm_failure: mst = nca_s_comm_failure; break;
case rpc_s_unknown_if: mst = nca_s_unk_if; break;
case rpc_s_protocol_error: mst = nca_s_proto_error; break;
case rpc_s_unsupported_type: mst = nca_s_unsupported_type; break;
case rpc_s_manager_not_entered: mst = nca_s_manager_not_entered; break;
case rpc_s_op_rng_error: mst = nca_s_op_rng_error; break;
case rpc_s_call_orphaned: mst = nca_s_unspec_reject; break;
case rpc_s_unknown_reject: mst = nca_s_unspec_reject; break;
case rpc_s_unknown_mgr_type: mst = nca_s_unsupported_type; break;
default:
RPC_DBG_GPRINTF(("(queue_mapped_reject) unknown status; st=0x%x\n", st));
mst = nca_s_unspec_reject;
break;
}
/*
* Build the iovector for calling transmit_int
*/
iovec.num_elt = 1;
iovec.elt[0].buff_dealloc = NULL;
iovec.elt[0].flags = rpc_c_iovector_elt_reused;
iovec.elt[0].data_addr = (byte_p_t) &mst;
iovec.elt[0].data_len = sizeof(st);
RPC_DG_CALL_LOCK_ASSERT(&scall->c);
/*
* Purge the recvq since it won't be used after this. The recvq
* may currently have lots of rqes on it and freeing it now will
* help pkt rationing. It's likely that the recvq is already empty
* however, this is the slow path so do it (again) just to be sure.
*/
rpc__dg_recvq_free(&scall->c.rq);
/*
* Toss any pending xmitq pkts and add the fault_info to the xmit
* queue just as if it were a response (but whack the proto pkt header
* to the fault pkt type). The call will now be in the xmit state if it
* wasn't already there. Defer the sending of the fault until
* the "end of the call" (execute_call). This prevents the client
* from receiving the complete response, completing the call and
* generating a new one while the server still thinks the call is
* not complete (thinking it must have dropped an ack,...). The
* fault is really just a special response pkt.
*
* This routine is called by the sstub (the thread executing the
* call) so there's no need to signal the call. We don't actually
* want the call's status to be set to a error value; the server
* runtime wants to still complete processing the call which involves
* sending the fault response to the client (instead of any further
* data response).
*
* Subsequent fault response retransmissions will occur just as if
* this were a "normal" call response as well as in reply to a ping.
* Of course, faults for idempotent calls don't get remembered or
* retransmitted.
*/
RPC_DBG_GPRINTF(("(queue_mapped_reject) st=0x%x => 0x%x [%s]\n",
st, mst, rpc__dg_act_seq_string(&scall->c.xq.hdr)));
RPC_DG_XMITQ_REINIT(&scall->c.xq, &scall->c);
RPC_DG_HDR_SET_PTYPE(&scall->c.xq.hdr, RPC_C_DG_PT_REJECT);
rpc__dg_call_transmit_int(&scall->c, &iovec, &tst);
/*
* The transmit may fail because the call is already orphaned.
* It may fail for some other reason as well. In either case,
* we're not gonna get a response to the client. Just keep
* falling through (other calls may fail as well) and clean up.
*/
}
