void RTMPGetLEDSetting(IN RTMP_ADAPTER *pAd)
{
USHORT Value;
PLED_CONTROL pLedCntl = &pAd->LedCntl;
#ifdef RT65xx
if (IS_RT6590(pAd))
{
; // TODO: wait TC6008 EEPROM format
}
else
#endif /* RT65xx */
#ifdef MT7601
if (IS_MT7601(pAd))
{
; // TODO: wait TC6008 EEPROM format
}
else
#endif /* MT7601 */
{
RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, Value);
pLedCntl->MCULedCntl.word = (Value >> 8);
RT28xx_EEPROM_READ16(pAd, EEPROM_LEDAG_CONF_OFFSET, Value);
pLedCntl->LedAGCfg= Value;
RT28xx_EEPROM_READ16(pAd, EEPROM_LEDACT_CONF_OFFSET, Value);
pLedCntl->LedACTCfg = Value;
RT28xx_EEPROM_READ16(pAd, EEPROM_LED_POLARITY_OFFSET, Value);
pLedCntl->LedPolarity = Value;
}
}
void RTMPGetLEDSetting(IN RTMP_ADAPTER *pAd)
{
USHORT Value;
PLED_CONTROL pLedCntl = &pAd->LedCntl;
{
RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, Value);
pLedCntl->MCULedCntl.word = (Value >> 8);
RT28xx_EEPROM_READ16(pAd, EEPROM_LEDAG_CONF_OFFSET, Value);
pLedCntl->LedAGCfg= Value;
RT28xx_EEPROM_READ16(pAd, EEPROM_LEDACT_CONF_OFFSET, Value);
pLedCntl->LedACTCfg = Value;
RT28xx_EEPROM_READ16(pAd, EEPROM_LED_POLARITY_OFFSET, Value);
pLedCntl->LedPolarity = Value;
}
}
void rtmp_read_led_setting_from_eeprom(RTMP_ADAPTER *pAd)
{
USHORT Value;
PLED_CONTROL pLedCntl = &pAd->LedCntl;
{
RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, Value);
pLedCntl->MCULedCntl.word = (Value >> 8);
RT28xx_EEPROM_READ16(pAd, EEPROM_LEDAG_CONF_OFFSET, Value);
pLedCntl->LedAGCfg= Value;
RT28xx_EEPROM_READ16(pAd, EEPROM_LEDACT_CONF_OFFSET, Value);
pLedCntl->LedACTCfg = Value;
RT28xx_EEPROM_READ16(pAd, EEPROM_LED_POLARITY_OFFSET, Value);
pLedCntl->LedPolarity = Value;
}
}
VOID IQCalibrationViaBBPAccessSpace(
IN PRTMP_ADAPTER pAd,
IN UCHAR Channel)
{
INT BBPIndex;
UINT16 E2PValue;
/* IQ Calibration */
if (Channel <= 14)
{
for (BBPIndex = 0; BBPIndex <= 7; BBPIndex++)
{
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_GLOBAL_BBP_ACCESS_BASE + (BBPIndex * 2), E2PValue);
if (E2PValue == 0xFFFF)
{
DBGPRINT(RT_DEBUG_INFO, ("%s() : EEPROM 0x%X is not calibrated !\n", __FUNCTION__,
(EEPROM_IQ_GLOBAL_BBP_ACCESS_BASE + (BBPIndex * 2))));
continue;
}
else
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, (UCHAR)((E2PValue >> 8) & 0x00FF), (UCHAR)(E2PValue & 0x00FF));
}
}
}
else
/* Read power per rate */
void mt7628_get_tx_pwr_per_rate(RTMP_ADAPTER *pAd)
{
BOOLEAN is_empty = 0;
UINT16 value = 0;
struct MT_TX_PWR_CAP *cap = &pAd->chipCap.MTTxPwrCap;
/* G Band tx power for CCK 1M/2M, 5.5M/11M */
is_empty = RT28xx_EEPROM_READ16(pAd, TX_PWR_CCK_1_2M, value);
if (is_empty) {
cap->tx_pwr_cck_1_2 = 0;
cap->tx_pwr_cck_5_11 = 0;
} else {
/* CCK 1M/2M */
if (value & TX_PWR_CCK_1_2M_EN) {
if (value & TX_PWR_CCK_1_2M_SIGN) {
cap->tx_pwr_cck_1_2 = (value & TX_PWR_CCK_1_2M_MASK);
} else {
cap->tx_pwr_cck_1_2 = -(value & TX_PWR_CCK_1_2M_MASK);
}
} else {
cap->tx_pwr_cck_1_2 = 0;
}
/* CCK 5.5M/11M */
if (value & TX_PWR_CCK_5_11M_EN) {
if (value & TX_PWR_CCK_5_11M_SIGN) {
cap->tx_pwr_cck_5_11 = ((value & TX_PWR_CCK_5_11M_MASK) >> 8);
} else {
cap->tx_pwr_cck_5_11 = -((value & TX_PWR_CCK_5_11M_MASK) >> 8);
}
} else {
VOID IQCalibration(
IN PRTMP_ADAPTER pAd,
IN UCHAR Channel)
{
UCHAR BBPValue;
UINT16 E2PValue;
/* IQ Calibration */
if (Channel <= 14)
{
/* TX0 IQ Gain */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R158, 0x2C);
BBPValue = IQCal(IQ_CAL_2G, IQ_CAL_TX0, IQ_CAL_GAIN);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R159, BBPValue);
/* TX0 IQ Phase */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R158, 0x2D);
BBPValue = IQCal(IQ_CAL_2G, IQ_CAL_TX0, IQ_CAL_PHASE);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R159, BBPValue);
/* TX1 IQ Gain */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R158, 0x4A);
BBPValue = IQCal(IQ_CAL_2G, IQ_CAL_TX1, IQ_CAL_GAIN);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R159, BBPValue);
/* TX1 IQ Phase */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R158, 0x4B);
BBPValue = IQCal(IQ_CAL_2G, IQ_CAL_TX1, IQ_CAL_PHASE);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R159, BBPValue);
/* RF IQ Compensation Control */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R158, 0x04);
RT28xx_EEPROM_READ16(pAd, EEPROM_RF_IQ_COMPENSATION_CONTROL, E2PValue);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R159, E2PValue & 0x00FF);
/* RF IQ Imbalance Compensation Control */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R158, 0x03);
RT28xx_EEPROM_READ16(pAd, EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL, E2PValue);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R159, E2PValue & 0x00FF);
}
else
DBGPRINT(RT_DEBUG_TRACE, ("%s() : 5 GHz band not supported !\n", __FUNCTION__));
}
INT RTMP_COM_IoctlHandle(
IN VOID *pAdSrc,
IN RTMP_IOCTL_INPUT_STRUCT *wrq,
IN INT cmd,
IN USHORT subcmd,
IN VOID *pData,
IN ULONG Data)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
INT Status = NDIS_STATUS_SUCCESS, i;
UCHAR PermanentAddress[MAC_ADDR_LEN];
USHORT Addr01, Addr23, Addr45;
pObj = pObj; /* avoid compile warning */
switch(cmd)
{
case CMD_RTPRIV_IOCTL_NETDEV_GET:
/* get main net_dev */
{
VOID **ppNetDev = (VOID **)pData;
*ppNetDev = (VOID *)(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_NETDEV_SET:
/* set main net_dev */
pAd->net_dev = pData;
break;
case CMD_RTPRIV_IOCTL_OPMODE_GET:
/* get Operation Mode */
*(ULONG *)pData = pAd->OpMode;
break;
case CMD_RTPRIV_IOCTL_TASK_LIST_GET:
/* get all Tasks */
{
RT_CMD_WAIT_QUEUE_LIST *pList = (RT_CMD_WAIT_QUEUE_LIST *)pData;
pList->pMlmeTask = &pAd->mlmeTask;
#ifdef RTMP_TIMER_TASK_SUPPORT
pList->pTimerTask = &pAd->timerTask;
#endif /* RTMP_TIMER_TASK_SUPPORT */
pList->pCmdQTask = &pAd->cmdQTask;
}
break;
case CMD_RTPRIV_IOCTL_IRQ_INIT:
/* init IRQ */
RTMP_IRQ_INIT(pAd);
break;
case CMD_RTPRIV_IOCTL_IRQ_RELEASE:
/* release IRQ */
RTMP_OS_IRQ_RELEASE(pAd, pAd->net_dev);
break;
#ifdef RTMP_MAC_PCI
case CMD_RTPRIV_IOCTL_MSI_ENABLE:
/* enable MSI */
RTMP_MSI_ENABLE(pAd);
*(ULONG **)pData = (ULONG *)(pObj->pci_dev);
break;
#endif /* RTMP_MAC_PCI */
case CMD_RTPRIV_IOCTL_NIC_NOT_EXIST:
/* set driver state to fRTMP_ADAPTER_NIC_NOT_EXIST */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
break;
#ifdef CONFIG_APSTA_MIXED_SUPPORT
case CMD_RTPRIV_IOCTL_MAX_IN_BIT:
/* set MAX_IN_BIT for WMM */
CW_MAX_IN_BITS = Data;
break;
#endif /* CONFIG_APSTA_MIXED_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
case CMD_RTPRIV_IOCTL_USB_DEV_GET:
/* get USB DEV */
{
VOID **ppUsb_Dev = (VOID **)pData;
*ppUsb_Dev = (VOID *)(pObj->pUsb_Dev);
}
break;
case CMD_RTPRIV_IOCTL_USB_INTF_GET:
/* get USB INTF */
{
VOID **ppINTF = (VOID **)pData;
*ppINTF = (VOID *)(pObj->intf);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_SET:
/* set driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_SET_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_CLEAR:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_CLEAR_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SEND_DISSASSOCIATE:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);/* kfree(MsgElem);*/
os_free_mem(NULL, MsgElem);
}
/* RTMPusecDelay(1000);*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CGIWAP, -1, NULL, NULL, 0);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_TEST:
/* test driver state to fRTMP_ADAPTER_SUSPEND */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_IDLE_RADIO_OFF_TEST:
/* test driver state to fRTMP_ADAPTER_IDLE_RADIO_OFF */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_IDLE_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_OFF:
/* RT28xxUsbAsicRadioOff */
RT28xxUsbAsicRadioOff(pAd);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_ON:
/* RT28xxUsbAsicRadioOn */
RT28xxUsbAsicRadioOn(pAd);
break;
#ifdef WOW_SUPPORT
#endif /* WOW_SUPPORT */
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */
case CMD_RTPRIV_IOCTL_AP_BSSID_GET:
if (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)
NdisCopyMemory(pData, pAd->MlmeAux.Bssid, 6);
else
return NDIS_STATUS_FAILURE;
break;
#endif /* CONFIG_STA_SUPPORT */
case CMD_RTPRIV_IOCTL_SANITY_CHECK:
/* sanity check before IOCTL */
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
#ifdef IFUP_IN_PROBE
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
#endif /* IFUP_IN_PROBE */
)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_SIOCGIWFREQ:
/* get channel number */
*(ULONG *)pData = pAd->CommonCfg.Channel;
break;
case CMD_RTPRIV_IOCTL_BEACON_UPDATE:
/* update all beacon contents */
break;
case CMD_RTPRIV_IOCTL_RXPATH_GET:
/* get the number of rx path */
*(ULONG *)pData = pAd->Antenna.field.RxPath;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_NUM_GET:
*(ULONG *)pData = pAd->ChannelListNum;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_GET:
{
UINT32 i;
UCHAR *pChannel = (UCHAR *)pData;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
*pChannel = pAd->ChannelList[i-1].Channel;
pChannel ++;
}
}
break;
case CMD_RTPRIV_IOCTL_FREQ_LIST_GET:
{
UINT32 i;
UINT32 *pFreq = (UINT32 *)pData;
UINT32 m;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
m = 2412000;
MAP_CHANNEL_ID_TO_KHZ(pAd->ChannelList[i-1].Channel, m);
(*pFreq) = m;
pFreq ++;
}
}
break;
#ifdef RTMP_PCI_SUPPORT
case CMD_RTPRIV_IOCTL_PCI_SUSPEND:
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_PCI_RESUME:
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_PCI_CSR_SET:
pAd->CSRBaseAddress = (PUCHAR)Data;
DBGPRINT(RT_DEBUG_ERROR, ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n", (ULONG)pAd->CSRBaseAddress, (ULONG)Data));
break;
case CMD_RTPRIV_IOCTL_PCIE_INIT:
RTMPInitPCIeDevice(pData, pAd);
break;
#endif /* RTMP_PCI_SUPPORT */
#ifdef RT_CFG80211_SUPPORT
case CMD_RTPRIV_IOCTL_CFG80211_CFG_START:
RT_CFG80211_REINIT(pAd);
RT_CFG80211_CRDA_REG_RULE_APPLY(pAd);
break;
#endif /* RT_CFG80211_SUPPORT */
#ifdef INF_PPA_SUPPORT
case CMD_RTPRIV_IOCTL_INF_PPA_INIT:
os_alloc_mem(NULL, (UCHAR **)&(pAd->pDirectpathCb), sizeof(PPA_DIRECTPATH_CB));
break;
case CMD_RTPRIV_IOCTL_INF_PPA_EXIT:
if (ppa_hook_directpath_register_dev_fn && pAd->PPAEnable==TRUE)
{
UINT status;
status=ppa_hook_directpath_register_dev_fn(&pAd->g_if_id, pAd->net_dev, NULL, 0);
DBGPRINT(RT_DEBUG_TRACE, ("unregister PPA:g_if_id=%d status=%d\n",pAd->g_if_id,status));
}
os_free_mem(NULL, pAd->pDirectpathCb);
break;
#endif /* INF_PPA_SUPPORT*/
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP:
/* interface up */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
if (VIRTUAL_IF_NUM(pAd) == 0)
{
if (pInfConf->rt28xx_open(pAd->net_dev) != 0)
{
DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_open return fail!\n"));
return NDIS_STATUS_FAILURE;
}
}
else
{
}
VIRTUAL_IF_INC(pAd);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN:
/* interface down */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
VIRTUAL_IF_DEC(pAd);
if (VIRTUAL_IF_NUM(pAd) == 0)
pInfConf->rt28xx_close(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_GET:
/* get virtual interface number */
*(ULONG *)pData = VIRTUAL_IF_NUM(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_TYPE_GET:
/* get current interface type */
*(ULONG *)pData = pAd->infType;
break;
case CMD_RTPRIV_IOCTL_INF_STATS_GET:
/* get statistics */
{
RT_CMD_STATS *pStats = (RT_CMD_STATS *)pData;
pStats->pStats = pAd->stats;
pStats->rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
pStats->tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
pStats->rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
pStats->tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
pStats->rx_errors = pAd->Counters8023.RxErrors;
pStats->tx_errors = pAd->Counters8023.TxErrors;
pStats->multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; /* multicast packets received*/
pStats->collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions; /* Collision packets*/
pStats->rx_over_errors = pAd->Counters8023.RxNoBuffer; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/*pAd->WlanCounters.FCSErrorCount; recved pkt with crc error*/
pStats->rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = pAd->Counters8023.RxNoBuffer; /* recv'r fifo overrun*/
}
break;
case CMD_RTPRIV_IOCTL_INF_IW_STATUS_GET:
/* get wireless statistics */
{
UCHAR CurOpMode = OPMODE_AP;
RT_CMD_IW_STATS *pStats = (RT_CMD_IW_STATS *)pData;
pStats->qual = 0;
pStats->level = 0;
pStats->noise = 0;
pStats->pStats = pAd->iw_stats;
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA)
{
CurOpMode = OPMODE_STA;
}
#endif /* CONFIG_STA_SUPPORT */
/*check if the interface is down*/
if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
return NDIS_STATUS_FAILURE;
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
pStats->qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
#endif /* CONFIG_STA_SUPPORT */
if (pStats->qual > 100)
pStats->qual = 100;
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
{
pStats->level =
RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2);
}
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
pStats->noise = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2) -
RTMPMinSnr(pAd, pAd->StaCfg.RssiSample.AvgSnr0,
pAd->StaCfg.RssiSample.AvgSnr1);
#endif /* CONFIG_STA_SUPPORT */
}
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CREATE:
*(VOID **)pData = RtmpPhyNetDevMainCreate(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_ID_GET:
*(ULONG *)pData = INT_MAIN;
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CHECK:
if (Data != INT_MAIN)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_INF_P2P_CHECK:
if (Data != INT_P2P)
return NDIS_STATUS_FAILURE;
break;
#ifdef WDS_SUPPORT
case CMD_RTPRIV_IOCTL_WDS_INIT:
WDS_Init(pAd, pData);
break;
case CMD_RTPRIV_IOCTL_WDS_REMOVE:
WDS_Remove(pAd);
break;
case CMD_RTPRIV_IOCTL_WDS_STATS_GET:
if (Data == INT_WDS)
{
if (WDS_StatsGet(pAd, pData) != TRUE)
return NDIS_STATUS_FAILURE;
}
else
return NDIS_STATUS_FAILURE;
break;
#endif /* WDS_SUPPORT */
#ifdef RALINK_ATE
#ifdef RALINK_QA
case CMD_RTPRIV_IOCTL_ATE:
RtmpDoAte(pAd, wrq, pData);
break;
#endif /* RALINK_QA */
#endif /* RALINK_ATE */
case CMD_RTPRIV_IOCTL_MAC_ADDR_GET:
RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
PermanentAddress[0] = (UCHAR)(Addr01 & 0xff);
PermanentAddress[1] = (UCHAR)(Addr01 >> 8);
PermanentAddress[2] = (UCHAR)(Addr23 & 0xff);
PermanentAddress[3] = (UCHAR)(Addr23 >> 8);
PermanentAddress[4] = (UCHAR)(Addr45 & 0xff);
PermanentAddress[5] = (UCHAR)(Addr45 >> 8);
for(i=0; i<6; i++)
*(UCHAR *)(pData+i) = PermanentAddress[i];
break;
case CMD_RTPRIV_IOCTL_SIOCGIWNAME:
RtmpIoctl_rt_ioctl_giwname(pAd, pData, 0);
break;
}
#ifdef RT_CFG80211_SUPPORT
if ((CMD_RTPRIV_IOCTL_80211_START <= cmd) &&
(cmd <= CMD_RTPRIV_IOCTL_80211_END))
{
CFG80211DRV_IoctlHandle(pAd, wrq, cmd, subcmd, pData, Data);
}
#endif /* RT_CFG80211_SUPPORT */
if (cmd >= CMD_RTPRIV_IOCTL_80211_COM_LATEST_ONE)
return NDIS_STATUS_FAILURE;
return Status;
}
/*
========================================================================
Routine Description:
Set LED Status
Arguments:
pAd Pointer to our adapter
Status LED Status
Return Value:
None
IRQL = PASSIVE_LEVEL
IRQL = DISPATCH_LEVEL
Note:
========================================================================
*/
VOID RTMPSetLEDStatus(
IN PRTMP_ADAPTER pAd,
IN UCHAR Status)
{
/*ULONG data; */
UCHAR LinkStatus = 0;
UCHAR LedMode;
UCHAR MCUCmd = 0;
BOOLEAN bIgnored = FALSE;
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
PWSC_CTRL pWscControl = NULL;
#ifdef CONFIG_AP_SUPPORT
pWscControl = &pAd->ApCfg.MBSSID[MAIN_MBSSID].WscControl;
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
pWscControl = &pAd->StaCfg.WscControl;
#endif /* CONFIG_STA_SUPPORT */
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */
#ifdef RALINK_ATE
/*
In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
So LED mode is not supported when ATE is running.
*/
if (!IS_RT3572(pAd))
{
if (ATE_ON(pAd))
return;
}
#endif /* RALINK_ATE */
LedMode = LED_MODE(pAd);
switch (Status)
{
case LED_LINK_DOWN:
LinkStatus = LINK_STATUS_LINK_DOWN;
pAd->LedCntl.LedIndicatorStrength = 0;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_LINK_UP:
if (pAd->CommonCfg.Channel > 14)
LinkStatus = LINK_STATUS_ABAND_LINK_UP;
else
LinkStatus = LINK_STATUS_GBAND_LINK_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_RADIO_ON:
LinkStatus = LINK_STATUS_RADIO_ON;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_HALT:
LedMode = 0; /* Driver sets MAC register and MAC controls LED */
case LED_RADIO_OFF:
LinkStatus = LINK_STATUS_RADIO_OFF;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_WPS:
LinkStatus = LINK_STATUS_WPS;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_ON_SITE_SURVEY:
LinkStatus = LINK_STATUS_ON_SITE_SURVEY;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_POWER_UP:
LinkStatus = LINK_STATUS_POWER_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
#ifdef RALINK_ATE
#endif /* RALINK_ATE */
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
#ifdef CONFIG_WIFI_LED_SHARE
case LED_WPS_PRE_STAGE:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_PRE_STAGE;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_PRE_STAGE;
}
else
bIgnored = TRUE;
break;
case LED_WPS_POST_STAGE:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_PRE_STAGE;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_POST_STAGE;
}
else
bIgnored = TRUE;
break;
#endif /* CONFIG_WIFI_LED_SHARE */
case LED_WPS_IN_PROCESS:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_IN_PROCESS;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_IN_PROCESS;
DBGPRINT(RT_DEBUG_TRACE, ("%s: LED_WPS_IN_PROCESS\n", __FUNCTION__));
}
else
bIgnored = TRUE;
break;
case LED_WPS_ERROR:
if (WscSupportWPSLEDMode(pAd))
{
/* In the case of LED mode 9, the error LED should be turned on only after WPS walk time expiration. */
if ((pWscControl->bWPSWalkTimeExpiration == FALSE) &&
(LED_MODE(pAd) == WPS_LED_MODE_9))
{
/* do nothing. */
}
else
{
LinkStatus = LINK_STATUS_WPS_ERROR;
MCUCmd = MCU_SET_WPS_LED_MODE;
}
pWscControl->WscLEDMode = LED_WPS_ERROR;
pWscControl->WscLastWarningLEDMode = LED_WPS_ERROR;
}
else
bIgnored = TRUE;
break;
case LED_WPS_SESSION_OVERLAP_DETECTED:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_SESSION_OVERLAP_DETECTED;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
pWscControl->WscLastWarningLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
}
else
bIgnored = TRUE;
break;
case LED_WPS_SUCCESS:
if (WscSupportWPSLEDMode(pAd))
{
if ((LED_MODE(pAd) == WPS_LED_MODE_7) ||
(LED_MODE(pAd) == WPS_LED_MODE_11) ||
(LED_MODE(pAd) == WPS_LED_MODE_12)
#ifdef CONFIG_WIFI_LED_SHARE
||(LED_MODE(pAd) == WPS_LED_MODE_SHARE)
#endif /* CONFIG_WIFI_LED_SHARE */
)
{
/* In the WPS LED mode 7, 11 and 12, the blue LED would last 300 seconds regardless of the AP's security settings. */
LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
else if (LED_MODE(pAd) == WPS_LED_MODE_8) /* The WPS LED mode 8 */
{
if (WscAPHasSecuritySetting(pAd, pWscControl)) /* The WPS AP has the security setting. */
{
LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
else /* The WPS AP does not have the secuirty setting. */
{
LinkStatus = LINK_STATUS_WPS_SUCCESS_WITHOUT_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
}
else if (LED_MODE(pAd) == WPS_LED_MODE_9) /* The WPS LED mode 9. */
{
/* Always turn on the WPS blue LED for 300 seconds. */
LinkStatus = LINK_STATUS_WPS_BLUE_LED;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
else
{
DBGPRINT(RT_DEBUG_TRACE, ("%s: LED_WPS_SUCCESS (Incorrect LED mode = %d)\n",
__FUNCTION__, LED_MODE(pAd)));
ASSERT(FALSE);
}
}
else
bIgnored = TRUE;
break;
case LED_WPS_TURN_LED_OFF:
if (WscSupportWPSLEDMode(pAd))
{
#ifdef CONFIG_WIFI_LED_SHARE
USHORT value;
RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, value);
pAd->LedCntl.MCULedCntl.word = (value >> 8);
#endif /* CONFIG_WIFI_LED_SHARE */
LinkStatus = LINK_STATUS_WPS_TURN_LED_OFF;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_TURN_LED_OFF;
}
else
bIgnored = TRUE;
break;
case LED_WPS_TURN_ON_BLUE_LED:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_BLUE_LED;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
}
else
bIgnored = TRUE;
break;
case LED_NORMAL_CONNECTION_WITHOUT_SECURITY:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITHOUT_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
}
else
bIgnored = TRUE;
break;
case LED_NORMAL_CONNECTION_WITH_SECURITY:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITH_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
}
else
bIgnored = TRUE;
break;
/*WPS LED Mode 10 */
case LED_WPS_MODE10_TURN_ON:
if(WscSupportWPSLEDMode10(pAd))
{
LinkStatus = LINK_STATUS_WPS_MODE10_TURN_ON;
MCUCmd = MCU_SET_WPS_LED_MODE;
}
else
bIgnored = TRUE;
break;
case LED_WPS_MODE10_FLASH:
if(WscSupportWPSLEDMode10(pAd))
{
LinkStatus = LINK_STATUS_WPS_MODE10_FLASH;
MCUCmd = MCU_SET_WPS_LED_MODE;
}
else
bIgnored = TRUE;
break;
case LED_WPS_MODE10_TURN_OFF:
if(WscSupportWPSLEDMode10(pAd))
{
LinkStatus = LINK_STATUS_WPS_MODE10_TURN_OFF;
MCUCmd = MCU_SET_WPS_LED_MODE;;
}
else
bIgnored = TRUE;
break;
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */
default:
DBGPRINT(RT_DEBUG_WARN, ("RTMPSetLED::Unknown Status 0x%x\n", Status));
break;
}
VOID RTMPInitPCIeLinkCtrlValue(
IN PRTMP_ADAPTER pAd)
{
INT pos;
USHORT reg16, data2, PCIePowerSaveLevel, Configuration;
UINT32 MacValue;
BOOLEAN bFindIntel = FALSE;
POS_COOKIE pObj;
pObj = (POS_COOKIE) pAd->OS_Cookie;
if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
DBGPRINT(RT_DEBUG_TRACE, ("Not PCIe device.\n"));
return;
}
DBGPRINT(RT_DEBUG_TRACE, ("%s.===>\n", __FUNCTION__));
// Init EEPROM, and save settings
if (!(IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd) || IS_RT3593(pAd)))
{
RT28xx_EEPROM_READ16(pAd, 0x22, PCIePowerSaveLevel);
pAd->PCIePowerSaveLevel = PCIePowerSaveLevel & 0xff;
pAd->LnkCtrlBitMask = 0;
if ((PCIePowerSaveLevel&0xff) == 0xff)
{
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE);
DBGPRINT(RT_DEBUG_TRACE, ("====> PCIePowerSaveLevel = 0x%x.\n", PCIePowerSaveLevel));
return;
}
else
{
PCIePowerSaveLevel &= 0x3;
RT28xx_EEPROM_READ16(pAd, 0x24, data2);
if( !(((data2&0xff00) == 0x9200) && ((data2&0x80) !=0)) )
{
if (PCIePowerSaveLevel > 1 )
PCIePowerSaveLevel = 1;
}
DBGPRINT(RT_DEBUG_TRACE, ("====> Write 0x83 = 0x%x.\n", PCIePowerSaveLevel));
AsicSendCommandToMcu(pAd, TRUE, 0x83, 0xff, (UCHAR)PCIePowerSaveLevel, 0x00);
RT28xx_EEPROM_READ16(pAd, 0x22, PCIePowerSaveLevel);
PCIePowerSaveLevel &= 0xff;
PCIePowerSaveLevel = PCIePowerSaveLevel >> 6;
switch(PCIePowerSaveLevel)
{
case 0: // Only support L0
pAd->LnkCtrlBitMask = 0;
break;
case 1: // Only enable L0s
pAd->LnkCtrlBitMask = 1;
break;
case 2: // enable L1, L0s
pAd->LnkCtrlBitMask = 3;
break;
case 3: // sync with host clk and enable L1, L0s
pAd->LnkCtrlBitMask = 0x103;
break;
}
RT28xx_EEPROM_READ16(pAd, 0x24, data2);
if ((PCIePowerSaveLevel&0xff) != 0xff)
{
PCIePowerSaveLevel &= 0x3;
if( !(((data2&0xff00) == 0x9200) && ((data2&0x80) !=0)) )
{
if (PCIePowerSaveLevel > 1 )
PCIePowerSaveLevel = 1;
}
DBGPRINT(RT_DEBUG_TRACE, ("====> rt28xx Write 0x83 Command = 0x%x.\n", PCIePowerSaveLevel));
printk("\n\n\n%s:%d\n",__FUNCTION__,__LINE__);
AsicSendCommandToMcu(pAd, TRUE, 0x83, 0xff, (UCHAR)PCIePowerSaveLevel, 0x00);
}
DBGPRINT(RT_DEBUG_TRACE, ("====> LnkCtrlBitMask = 0x%x.\n", pAd->LnkCtrlBitMask));
}
}
//
// PCI device probe & initialization function
//
static INT __devinit rt2860_probe(
IN struct pci_dev *pci_dev,
IN const struct pci_device_id *pci_id)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)NULL;
struct net_device *net_dev;
PVOID handle;
PSTRING print_name;
ULONG csr_addr;
INT rv = 0;
RTMP_OS_NETDEV_OP_HOOK netDevHook;
#ifdef PRE_ASSIGN_MAC_ADDR
USHORT Addr01,Addr23,Addr45 ;
#endif // PRE_ASSIGN_MAC_ADDR //
DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_probe\n"));
//PCIDevInit==============================================
// wake up and enable device
if ((rv = pci_enable_device(pci_dev))!= 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Enable PCI device failed, errno=%d!\n", rv));
return rv;
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
print_name = pci_dev ? pci_name(pci_dev) : "rt2860";
#else
print_name = pci_dev ? pci_dev->slot_name : "rt2860";
#endif // LINUX_VERSION_CODE //
if ((rv = pci_request_regions(pci_dev, print_name)) != 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Request PCI resource failed, errno=%d!\n", rv));
goto err_out;
}
// map physical address to virtual address for accessing register
csr_addr = (unsigned long) ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0));
if (!csr_addr)
{
DBGPRINT(RT_DEBUG_ERROR, ("ioremap failed for device %s, region 0x%lX @ 0x%lX\n",
print_name, (ULONG)pci_resource_len(pci_dev, 0), (ULONG)pci_resource_start(pci_dev, 0)));
goto err_out_free_res;
}
else
{
DBGPRINT(RT_DEBUG_TRACE, ("%s: at 0x%lx, VA 0x%lx, IRQ %d. \n", print_name,
(ULONG)pci_resource_start(pci_dev, 0), (ULONG)csr_addr, pci_dev->irq));
}
// Set DMA master
pci_set_master(pci_dev);
//RtmpDevInit==============================================
// Allocate RTMP_ADAPTER adapter structure
handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
if (handle == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s(): Allocate memory for os handle failed!\n", __FUNCTION__));
goto err_out_iounmap;
}
memset(handle, 0, sizeof(struct os_cookie));
((POS_COOKIE)handle)->pci_dev = pci_dev;
rv = RTMPAllocAdapterBlock(handle, &pAd); //shiang: we may need the pci_dev for allocate structure of "RTMP_ADAPTER"
if (rv != NDIS_STATUS_SUCCESS)
goto err_out_iounmap;
// Here are the RTMP_ADAPTER structure with pci-bus specific parameters.
pAd->CSRBaseAddress = (PUCHAR)csr_addr;
DBGPRINT(RT_DEBUG_ERROR, ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n", (ULONG)pAd->CSRBaseAddress, csr_addr));
RTMPInitPCIeDevice(pci_dev, pAd);
//NetDevInit==============================================
net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
if (net_dev == NULL)
goto err_out_free_radev;
// Here are the net_device structure with pci-bus specific parameters.
net_dev->irq = pci_dev->irq; // Interrupt IRQ number
net_dev->base_addr = csr_addr; // Save CSR virtual address and irq to device structure
pci_set_drvdata(pci_dev, net_dev); // Set driver data
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
/* for supporting Network Manager */
/* Set the sysfs physical device reference for the network logical device
* if set prior to registration will cause a symlink during initialization.
*/
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
SET_NETDEV_DEV(net_dev, &(pci_dev->dev));
#endif
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
//All done, it's time to register the net device to linux kernel.
// Register this device
#ifdef RT_CFG80211_SUPPORT
pAd->pCfgDev = &(pci_dev->dev);
pAd->CFG80211_Register = CFG80211_Register;
#endif // RT_CFG80211_SUPPORT //
rv = RtmpOSNetDevAttach(net_dev, &netDevHook);
if (rv)
goto err_out_free_netdev;
#ifdef CONFIG_STA_SUPPORT
pAd->StaCfg.OriDevType = net_dev->type;
#endif // CONFIG_STA_SUPPORT //
#ifdef KTHREAD_SUPPORT
init_waitqueue_head(&pAd->cmdQTask.kthread_q);
#endif // KTHREAD_SUPPORT //
//NICReadEEPROMParameters(pAd, "");
#ifdef CREDENTIAL_STORE
NdisAllocateSpinLock(&pAd->StaCtIf.Lock);
#endif /* CREDENTIAL_STORE */
#ifdef PRE_ASSIGN_MAC_ADDR
RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
pAd->PermanentAddress[0] = (UCHAR)(Addr01 & 0xff);
pAd->PermanentAddress[1] = (UCHAR)(Addr01 >> 8);
pAd->PermanentAddress[2] = (UCHAR)(Addr23 & 0xff);
pAd->PermanentAddress[3] = (UCHAR)(Addr23 >> 8);
pAd->PermanentAddress[4] = (UCHAR)(Addr45 & 0xff);
pAd->PermanentAddress[5] = (UCHAR)(Addr45 >> 8);
// Set up the Mac address
RtmpOSNetDevAddrSet(pAd->net_dev, &pAd->PermanentAddress[0]);
#endif // PRE_ASSIGN_MAC_ADDR //
DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_probe\n"));
return 0; // probe ok
/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
RtmpOSNetDevFree(net_dev);
err_out_free_radev:
/* free RTMP_ADAPTER strcuture and os_cookie*/
RTMPFreeAdapter(pAd);
err_out_iounmap:
iounmap((void *)(csr_addr));
release_mem_region(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0));
err_out_free_res:
pci_release_regions(pci_dev);
err_out:
pci_disable_device(pci_dev);
DBGPRINT(RT_DEBUG_ERROR, ("<=== rt2860_probe failed with rv = %d!\n", rv));
return -ENODEV; /* probe fail */
}
/* 2 -- Change ee settings */
int Set_EECMD_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
USHORT i;
i = simple_strtol(arg, 0, 10);
switch(i)
{
case 0:
{
USHORT value, k;
for (k = 0; k < EEPROM_SIZE; k+=2)
{
RT28xx_EEPROM_READ16(pAd, k, value);
DBGPRINT(RT_DEBUG_OFF, ("%4.4x ", value));
if (((k+2) % 0x20) == 0)
DBGPRINT(RT_DEBUG_OFF,("\n"));
}
}
break;
case 1:
if (pAd->infType == RTMP_DEV_INF_RBUS)
{
DBGPRINT(RT_DEBUG_OFF, ("EEPROM reset to default......\n"));
DBGPRINT(RT_DEBUG_OFF, ("The last byte of MAC address will be re-generated...\n"));
if (rtmp_ee_flash_reset(pAd, nv_ee_start) != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_ERROR, ("Set_EECMD_Proc: rtmp_ee_flash_reset() failed\n"));
return FALSE;
}
/* Random number for the last bytes of MAC address*/
{
USHORT Addr45;
rtmp_ee_flash_read(pAd, 0x08, &Addr45);
Addr45 = Addr45 & 0xff;
Addr45 = Addr45 | (RandomByte(pAd)&0xf8) << 8;
DBGPRINT(RT_DEBUG_OFF, ("Addr45 = %4x\n", Addr45));
rtmp_ee_flash_write(pAd, 0x08, Addr45);
}
if ((rtmp_ee_flash_read(pAd, 0, &i) != 0x2880) && (rtmp_ee_flash_read(pAd, 0, &i) != 0x2860))
{
DBGPRINT(RT_DEBUG_ERROR, ("Set_EECMD_Proc: invalid eeprom\n"));
return FALSE;
}
}
break;
case 2:
{
USHORT offset, value = 0;
PUCHAR p;
p = arg+2;
offset = simple_strtol(p, 0, 10);
p+=2;
while (*p != '\0')
{
if (*p >= '0' && *p <= '9')
value = (value << 4) + (*p - 0x30);
else if (*p >= 'a' && *p <= 'f')
value = (value << 4) + (*p - 0x57);
else if (*p >= 'A' && *p <= 'F')
value = (value << 4) + (*p - 0x37);
p++;
}
RT28xx_EEPROM_WRITE16(pAd, offset, value);
}
break;
default:
break;
}
return TRUE;
}
int rt28xx_init(
IN PRTMP_ADAPTER pAd,
IN PSTRING pDefaultMac,
IN PSTRING pHostName)
{
UINT index;
UCHAR TmpPhy;
NDIS_STATUS Status;
UINT32 MacCsr0 = 0;
UINT16 ChipId = 0;
// reset Adapter flags
RTMP_CLEAR_FLAGS(pAd);
// Init BssTab & ChannelInfo tabbles for auto channel select.
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
//#ifdef AUTO_CH_SELECT_ENHANCE
AutoChBssTableInit(pAd);
ChannelInfoInit(pAd);
//#endif // AUTO_CH_SELECT_ENHANCE //
}
#endif // CONFIG_AP_SUPPORT //
#ifdef DOT11_N_SUPPORT
// Allocate BA Reordering memory
if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE)
goto err1;
#endif // DOT11_N_SUPPORT //
// Make sure MAC gets ready.
index = 0;
do
{
RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
pAd->MACVersion = MacCsr0;
/* The purpose is to identify RT5390H */
RT28xx_EEPROM_READ16(pAd, 0x00, ChipId);
pAd->ChipId = ChipId;
if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF))
break;
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
goto err1;
RTMPusecDelay(10);
} while (index++ < 100);
DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
#ifdef RT5390
if (IS_RT5390H(pAd))
DBGPRINT(RT_DEBUG_ERROR, ("The chip belongs to 0x%04x\n", pAd->ChipId));
#endif /* RT5390 */
#ifdef SPECIFIC_BCN_BUF_SUPPORT
pAd->BcnCB.DYN_MAX_MBSSID_NUM = 1;
if (IS_RT5390(pAd) || IS_RT3593(pAd))
{
pAd->BcnCB.bHighShareMemSupport = 1;
pAd->BcnCB.DYN_HW_BEACON_BASE0 = 0x4000;
pAd->BcnCB.DYN_HW_BEACON_MAX_SIZE = 0x2000;
pAd->BcnCB.DYN_HW_BEACON_MAX_COUNT = 16;
#ifdef MBSS_SUPPORT
#ifdef APCLI_SUPPORT
pAd->BcnCB.DYN_MAX_MBSSID_NUM = 8 - MAX_MESH_NUM;
#else
pAd->BcnCB.DYN_MAX_MBSSID_NUM = 16 - MAX_MESH_NUM;
#endif // APCLI_SUPPORT //
#endif // MBSS_SUPPORT //
}
else
{
pAd->BcnCB.bHighShareMemSupport = 0;
pAd->BcnCB.DYN_HW_BEACON_BASE0 = 0x7800;
pAd->BcnCB.DYN_HW_BEACON_MAX_SIZE = 0x1000;
pAd->BcnCB.DYN_HW_BEACON_MAX_COUNT = 8;
#ifdef MBSS_SUPPORT
pAd->BcnCB.DYN_MAX_MBSSID_NUM = (pAd->BcnCB.DYN_HW_BEACON_MAX_COUNT - MAX_MESH_NUM - MAX_APCLI_NUM);
#endif // MBSS_SUPPORT //
}
#endif // SPECIFIC_BCN_BUF_SUPPORT //
#ifdef RTMP_MAC_PCI
#if defined(RT3090) || defined(RT3592) || defined(RT3390) || defined(RT3593) || defined(RT5390)
/*Iverson patch PCIE L1 issue to make sure that driver can be read,write ,BBP and RF register at pcie L.1 level */
if ((IS_RT3090(pAd) || IS_RT3572(pAd) ||
IS_RT3390(pAd) || IS_RT3593(pAd) || IS_RT5390(pAd))&&pAd->infType==RTMP_DEV_INF_PCIE)
{
RTMP_IO_READ32(pAd, AUX_CTRL, &MacCsr0);
MacCsr0 |= 0x402;
RTMP_IO_WRITE32(pAd, AUX_CTRL, MacCsr0);
DBGPRINT(RT_DEBUG_TRACE, ("AUX_CTRL = 0x%x\n", MacCsr0));
}
#endif // RT3090 //
// To fix driver disable/enable hang issue when radio off
RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2);
#endif // RTMP_MAC_PCI //
// Disable DMA
RT28XXDMADisable(pAd);
// Load 8051 firmware
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
goto err1;
}
NICLoadRateSwitchingParams(pAd);
// Disable interrupts here which is as soon as possible
// This statement should never be true. We might consider to remove it later
#ifdef RTMP_MAC_PCI
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
#endif // RTMP_MAC_PCI //
#ifdef RESOURCE_PRE_ALLOC
Status = RTMPInitTxRxRingMemory(pAd);
#else
Status = RTMPAllocTxRxRingMemory(pAd);
#endif // RESOURCE_PRE_ALLOC //
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status));
goto err2;
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
// initialize MLME
//
Status = RtmpMgmtTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err3;
Status = MlmeInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
goto err4;
}
#ifdef RMTP_RBUS_SUPPORT
#ifdef VIDEO_TURBINE_SUPPORT
VideoConfigInit(pAd);
#endif // VIDEO_TURBINE_SUPPORT //
#endif // RMTP_RBUS_SUPPORT //
// Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default
//
UserCfgInit(pAd);
Status = RtmpNetTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err5;
// COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);
// pAd->bForcePrintTX = TRUE;
CfgInitHook(pAd);
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
APInitialize(pAd);
#endif // CONFIG_AP_SUPPORT //
#ifdef BLOCK_NET_IF
initblockQueueTab(pAd);
#endif // BLOCK_NET_IF //
Status = MeasureReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
Status = TpcReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
//
// Init the hardware, we need to init asic before read registry, otherwise mac register will be reset
//
Status = NICInitializeAdapter(pAd, TRUE);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
if (Status != NDIS_STATUS_SUCCESS)
goto err6;
}
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
}
#endif // CONFIG_AP_SUPPORT //
// Read parameters from Config File
/* unknown, it will be updated in NICReadEEPROMParameters */
pAd->RfIcType = RFIC_UNKNOWN;
Status = RTMPReadParametersHook(pAd);
DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status));
goto err6;
}
#ifdef DOT11_N_SUPPORT
//Init Ba Capability parameters.
// RT28XX_BA_INIT(pAd);
pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
// UPdata to HT IE
pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
#endif // DOT11_N_SUPPORT //
// after reading Registry, we now know if in AP mode or STA mode
// Load 8051 firmware; crash when FW image not existent
// Status = NICLoadFirmware(pAd);
// if (Status != NDIS_STATUS_SUCCESS)
// break;
DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
// We should read EEPROM for all cases. rt2860b
NICReadEEPROMParameters(pAd, (PUCHAR)pDefaultMac);
DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
NICInitAsicFromEEPROM(pAd); //rt2860b
#ifdef RTMP_INTERNAL_TX_ALC
//
// Initialize the desired TSSI table
//
InitDesiredTSSITable(pAd);
#endif // RTMP_INTERNAL_TX_ALC //
#if defined(RT5390) || defined(RT5370)
//
// Temperature compensation, initialize the lookup table
//
DBGPRINT(RT_DEBUG_ERROR, ("IS_RT5392 = %d, bAutoTxAgcG = %d\n", IS_RT5392(pAd), pAd->bAutoTxAgcG));
if (IS_RT5392(pAd) && pAd->bAutoTxAgcG && pAd->CommonCfg.TempComp != 0)
{
InitLookupTable(pAd);
}
#endif // defined(RT5390) || defined(RT5370) //
// Set PHY to appropriate mode
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
#endif // DOT11_N_SUPPORT //
// No valid channels.
if (pAd->ChannelListNum == 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
goto err6;
}
#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]));
#endif // DOT11_N_SUPPORT //
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
#ifdef AP_QLOAD_SUPPORT
/* init QBSS Element */
QBSS_LoadInit(pAd);
#endif // AP_QLOAD_SUPPORT //
//#ifdef DOT11K_RRM_SUPPORT
// RRM_CfgInit(pAd);
//#endif // DOT11K_RRM_SUPPORT //
}
#endif // CONFIG_AP_SUPPORT //
// APInitialize(pAd);
#ifdef IKANOS_VX_1X0
VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
#endif // IKANOS_VX_1X0 //
#ifdef CONFIG_AP_SUPPORT
//
// Initialize RF register to default value
//
if (pAd->OpMode == OPMODE_AP)
{
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
}
#endif // CONFIG_AP_SUPPORT //
/*
Some modules init must be called before APStartUp().
Or APStartUp() will make up beacon content and call
other modules API to get some information to fill.
*/
#ifdef WMM_ACM_SUPPORT
#ifdef CONFIG_AP_SUPPORT
ACMP_Init(pAd,
pAd->CommonCfg.APEdcaParm.bACM[0],
pAd->CommonCfg.APEdcaParm.bACM[1],
pAd->CommonCfg.APEdcaParm.bACM[2],
pAd->CommonCfg.APEdcaParm.bACM[3], 0);
#endif // CONFIG_AP_SUPPORT //
#endif // WMM_ACM_SUPPORT //
if (pAd && (Status != NDIS_STATUS_SUCCESS))
{
//
// Undo everything if it failed
//
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
// NdisMDeregisterInterrupt(&pAd->Interrupt);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
// RTMPFreeAdapter(pAd); // we will free it in disconnect()
}
else if (pAd)
{
// Microsoft HCT require driver send a disconnect event after driver initialization.
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
if (pAd->ApCfg.bAutoChannelAtBootup || (pAd->CommonCfg.Channel == 0))
{
UINT8 BBPValue = 0;
// Enable Interrupt first due to we need to scan channel to receive beacons.
RTMP_IRQ_ENABLE(pAd);
// Now Enable RxTx
RTMPEnableRxTx(pAd);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);
// Let BBP register at 20MHz to do scan
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
BBPValue &= (~0x18);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
DBGPRINT(RT_DEBUG_ERROR, ("SYNC - BBP R4 to 20MHz.l\n"));
// Now we can receive the beacon and do the listen beacon
// use default BW to select channel
pAd->CommonCfg.Channel = AP_AUTO_CH_SEL(pAd, pAd->ApCfg.AutoChannelAlg);
pAd->ApCfg.bAutoChannelAtBootup = FALSE;
}
#ifdef DOT11_N_SUPPORT
// If phymode > PHY_11ABGN_MIXED and BW=40 check extension channel, after select channel
N_ChannelCheck(pAd);
#ifdef DOT11N_DRAFT3
/*
We only do this Overlapping BSS Scan when system up, for the
other situation of channel changing, we depends on station's
report to adjust ourself.
*/
if (pAd->CommonCfg.bForty_Mhz_Intolerant == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("Disable 20/40 BSSCoex Channel Scan(BssCoex=%d, 40MHzIntolerant=%d)\n",
pAd->CommonCfg.bBssCoexEnable,
pAd->CommonCfg.bForty_Mhz_Intolerant));
}
else if(pAd->CommonCfg.bBssCoexEnable == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("Enable 20/40 BSSCoex Channel Scan(BssCoex=%d)\n",
pAd->CommonCfg.bBssCoexEnable));
APOverlappingBSSScan(pAd);
}
RTMP_11N_D3_TimerInit(pAd);
// RTMPInitTimer(pAd, &pAd->CommonCfg.Bss2040CoexistTimer, GET_TIMER_FUNCTION(Bss2040CoexistTimeOut), pAd, FALSE);
#endif // DOT11N_DRAFT3 //
#endif // DOT11_N_SUPPORT //
#ifdef RT3090
#ifdef TONE_RADAR_DETECT_SUPPORT
if (IS_RT3090A(pAd) || IS_RT3390(pAd) || IS_RT5390(pAd))
pAd->CommonCfg.carrier_func=TONE_RADAR_V2;
else
pAd->CommonCfg.carrier_func=TONE_RADAR_V1;
#endif // TONE_RADAR_DETECT_SUPPORT //
#endif // RT3090 //
APStartUp(pAd);
DBGPRINT(RT_DEBUG_OFF, ("Main bssid = %02x:%02x:%02x:%02x:%02x:%02x\n",
PRINT_MAC(pAd->ApCfg.MBSSID[BSS0].Bssid)));
}
#endif // CONFIG_AP_SUPPORT //
}// end of else
#ifdef WSC_INCLUDED
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
INT apidx;
#ifdef HOSTAPD_SUPPORT
if (pAd->ApCfg.Hostapd == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("WPS is control by hostapd now.\n"));
}
else
#endif //HOSTAPD_SUPPORT//
for (apidx = 0; apidx < pAd->ApCfg.BssidNum; apidx++)
{
PWSC_CTRL pWscControl;
UCHAR zeros16[16]= {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
pWscControl = &pAd->ApCfg.MBSSID[apidx].WscControl;
DBGPRINT(RT_DEBUG_TRACE, ("Generate UUID for apidx(%d)\n", apidx));
if (NdisEqualMemory(&pWscControl->Wsc_Uuid_E[0], zeros16, UUID_LEN_HEX))
WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], apidx, FALSE);
WscInit(pAd, FALSE, apidx);
}
}
#endif // CONFIG_AP_SUPPORT //
/* WSC hardware push button function 0811 */
WSC_HDR_BTN_Init(pAd);
#endif // WSC_INCLUDED //
// Set up the Mac address
RtmpOSNetDevAddrSet(pAd->net_dev, &pAd->CurrentAddress[0]);
// Various AP function init
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
#ifdef MBSS_SUPPORT
/* the function can not be moved to RT2860_probe() even register_netdev()
is changed as register_netdevice().
Or in some PC, kernel will panic (Fedora 4) */
RT28xx_MBSS_Init(pAd, pAd->net_dev);
#endif // MBSS_SUPPORT //
#ifdef WDS_SUPPORT
RT28xx_WDS_Init(pAd, pAd->net_dev);
#endif // WDS_SUPPORT //
#ifdef APCLI_SUPPORT
RT28xx_ApCli_Init(pAd, pAd->net_dev);
#endif // APCLI_SUPPORT //
}
#endif // CONFIG_AP_SUPPORT //
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
#ifdef MAT_SUPPORT
MATEngineInit(pAd);
#endif // MAT_SUPPORT //
#ifdef CLIENT_WDS
CliWds_ProxyTabInit(pAd);
#endif // CLIENT_WDS //
}
#endif // CONFIG_AP_SUPPORT //
#ifdef RT33xx
if (IS_RT3390(pAd))
{
RTMP_TxEvmCalibration(pAd);
}
#endif // RT33xx //
DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));
return TRUE;
err6:
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
err5:
RtmpNetTaskExit(pAd);
UserCfgExit(pAd);
err4:
MlmeHalt(pAd);
err3:
RtmpMgmtTaskExit(pAd);
err2:
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
RTMPFreeTxRxRingMemory(pAd);
#endif // RESOURCE_PRE_ALLOC //
err1:
#ifdef DOT11_N_SUPPORT
if(pAd->mpdu_blk_pool.mem)
os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool
#endif // DOT11_N_SUPPORT //
// shall not set priv to NULL here because the priv didn't been free yet.
//net_dev->priv = 0;
#ifdef INF_AMAZON_SE
err0:
#endif // INF_AMAZON_SE //
#ifdef ST
err0:
#endif // ST //
DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
return FALSE;
}
UINT32 SetHWAntennaDivsersity(
IN PRTMP_ADAPTER pAd,
IN BOOLEAN Enable)
{
if (Enable == TRUE)
{
UINT8 BBPValue = 0, RFValue = 0;
USHORT value;
// RF_R29 bit7:6
RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_GAIN, value);
RT30xxReadRFRegister(pAd, RF_R29, &RFValue);
RFValue &= 0x3f; // clear bit7:6
RFValue |= (value << 6);
RT30xxWriteRFRegister(pAd, RF_R29, RFValue);
// BBP_R47 bit7=1
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R47, &BBPValue);
BBPValue |= 0x80;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R47, BBPValue);
BBPValue = 0xbe;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R150, BBPValue);
BBPValue = 0xb0;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R151, BBPValue);
BBPValue = 0x23;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R152, BBPValue);
BBPValue = 0x3a;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R153, BBPValue);
BBPValue = 0x10;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R154, BBPValue);
BBPValue = 0x3b;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R155, BBPValue);
BBPValue = 0x04;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R253, BBPValue);
DBGPRINT(RT_DEBUG_TRACE, ("HwAnDi> Enable!\n"));
}
else
{
UINT8 BBPValue = 0;
/*
main antenna: BBP_R152 bit7=1
aux antenna: BBP_R152 bit7=0
*/
if (pAd->FixDefaultAntenna == 0)
{
/* fix to main antenna */
/* do not care BBP R153, R155, R253 */
BBPValue = 0x3e;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R150, BBPValue);
BBPValue = 0x30;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R151, BBPValue);
BBPValue = 0x23;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R152, BBPValue);
BBPValue = 0x00;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R154, BBPValue);
}
else
{
/* fix to aux antenna */
/* do not care BBP R153, R155, R253 */
BBPValue = 0x3e;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R150, BBPValue);
BBPValue = 0x30;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R151, BBPValue);
BBPValue = 0xa3;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R152, BBPValue);
BBPValue = 0x00;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R154, BBPValue);
}
DBGPRINT(RT_DEBUG_TRACE, ("HwAnDi> Disable!\n"));
}
return 0;
}
void RTMPInitPCIeLinkCtrlValue(struct rt_rtmp_adapter *pAd)
{
int pos;
u16 reg16, data2, PCIePowerSaveLevel, Configuration;
u32 MacValue;
BOOLEAN bFindIntel = FALSE;
struct os_cookie *pObj;
pObj = (struct os_cookie *)pAd->OS_Cookie;
if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
return;
DBGPRINT(RT_DEBUG_TRACE, ("%s.===>\n", __func__));
/* Init EEPROM, and save settings */
if (!(IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))) {
RT28xx_EEPROM_READ16(pAd, 0x22, PCIePowerSaveLevel);
pAd->PCIePowerSaveLevel = PCIePowerSaveLevel & 0xff;
pAd->LnkCtrlBitMask = 0;
if ((PCIePowerSaveLevel & 0xff) == 0xff) {
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_PCIE_DEVICE);
DBGPRINT(RT_DEBUG_TRACE,
("====> PCIePowerSaveLevel = 0x%x.\n",
PCIePowerSaveLevel));
return;
} else {
PCIePowerSaveLevel &= 0x3;
RT28xx_EEPROM_READ16(pAd, 0x24, data2);
if (!
(((data2 & 0xff00) == 0x9200)
&& ((data2 & 0x80) != 0))) {
if (PCIePowerSaveLevel > 1)
PCIePowerSaveLevel = 1;
}
DBGPRINT(RT_DEBUG_TRACE,
("====> Write 0x83 = 0x%x.\n",
PCIePowerSaveLevel));
AsicSendCommandToMcu(pAd, 0x83, 0xff,
(u8)PCIePowerSaveLevel, 0x00);
RT28xx_EEPROM_READ16(pAd, 0x22, PCIePowerSaveLevel);
PCIePowerSaveLevel &= 0xff;
PCIePowerSaveLevel = PCIePowerSaveLevel >> 6;
switch (PCIePowerSaveLevel) {
case 0: /* Only support L0 */
pAd->LnkCtrlBitMask = 0;
break;
case 1: /* Only enable L0s */
pAd->LnkCtrlBitMask = 1;
break;
case 2: /* enable L1, L0s */
pAd->LnkCtrlBitMask = 3;
break;
case 3: /* sync with host clk and enable L1, L0s */
pAd->LnkCtrlBitMask = 0x103;
break;
}
RT28xx_EEPROM_READ16(pAd, 0x24, data2);
if ((PCIePowerSaveLevel & 0xff) != 0xff) {
PCIePowerSaveLevel &= 0x3;
if (!
(((data2 & 0xff00) == 0x9200)
&& ((data2 & 0x80) != 0))) {
if (PCIePowerSaveLevel > 1)
PCIePowerSaveLevel = 1;
}
DBGPRINT(RT_DEBUG_TRACE,
("====> rt28xx Write 0x83 Command = 0x%x.\n",
PCIePowerSaveLevel));
AsicSendCommandToMcu(pAd, 0x83, 0xff,
(u8)PCIePowerSaveLevel,
0x00);
}
DBGPRINT(RT_DEBUG_TRACE,
("====> LnkCtrlBitMask = 0x%x.\n",
pAd->LnkCtrlBitMask));
}
} else if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) {
VOID GetIQCalibration(IN PRTMP_ADAPTER pAd)
{
UINT16 E2PValue;
/* 2G IQ Calibration for TX0 */
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_GAIN_CAL_TX0_2G, E2PValue);
IQCalValue[IQ_CAL_2G][IQ_CAL_TX0][IQ_CAL_GAIN] = E2PValue & 0x00FF;
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_PHASE_CAL_TX0_2G, E2PValue);
IQCalValue[IQ_CAL_2G][IQ_CAL_TX0][IQ_CAL_PHASE] = E2PValue & 0x00FF;
/* 2G IQ Calibration for TX1 */
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_GAIN_CAL_TX1_2G, E2PValue);
IQCalValue[IQ_CAL_2G][IQ_CAL_TX1][IQ_CAL_GAIN] = E2PValue & 0x00FF;
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_PHASE_CAL_TX1_2G, E2PValue);
IQCalValue[IQ_CAL_2G][IQ_CAL_TX1][IQ_CAL_PHASE] = E2PValue & 0x00FF;
#ifdef A_BAND_SUPPORT
/* 5G IQ Calibration Value for TX0 of Ch36~Ch64 */
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP1_5G][IQ_CAL_TX0][IQ_CAL_GAIN] = E2PValue & 0x00FF;
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP1_5G][IQ_CAL_TX0][IQ_CAL_PHASE] = E2PValue & 0x00FF;
/* 5G IQ Calibration Value for TX1 of Ch36~Ch64 */
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP1_5G][IQ_CAL_TX1][IQ_CAL_GAIN] = E2PValue & 0x00FF;
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP1_5G][IQ_CAL_TX1][IQ_CAL_PHASE] = E2PValue & 0x00FF;
/* 5G IQ Calibration Value for TX0 of Ch100~Ch138 */
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP2_5G][IQ_CAL_TX0][IQ_CAL_GAIN] = E2PValue & 0x00FF;
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP2_5G][IQ_CAL_TX0][IQ_CAL_PHASE] = E2PValue & 0x00FF;
/* 5G IQ Calibration Value for TX1 of Ch100~Ch138 */
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP2_5G][IQ_CAL_TX1][IQ_CAL_GAIN] = E2PValue & 0x00FF;
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP2_5G][IQ_CAL_TX1][IQ_CAL_PHASE] = E2PValue & 0x00FF;
/* 5G IQ Calibration Value for TX0 of Ch140~Ch165 */
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP3_5G][IQ_CAL_TX0][IQ_CAL_GAIN] = E2PValue & 0x00FF;
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP3_5G][IQ_CAL_TX0][IQ_CAL_PHASE] = E2PValue & 0x00FF;
/* 5G IQ Calibration Value for TX1 of Ch140~Ch165 */
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP3_5G][IQ_CAL_TX1][IQ_CAL_GAIN] = E2PValue & 0x00FF;
RT28xx_EEPROM_READ16(pAd, EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G, E2PValue);
IQCalValue[IQ_CAL_GROUP3_5G][IQ_CAL_TX1][IQ_CAL_PHASE] = E2PValue & 0x00FF;
#endif /* A_BAND_SUPPORT */
}
INT RTMP_COM_IoctlHandle(
IN VOID *pAdSrc,
IN RTMP_IOCTL_INPUT_STRUCT *wrq,
IN INT cmd,
IN USHORT subcmd,
IN VOID *pData,
IN ULONG Data)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
INT Status = NDIS_STATUS_SUCCESS, i;
pObj = pObj; /* avoid compile warning */
switch(cmd)
{
case CMD_RTPRIV_IOCTL_NETDEV_GET:
/* get main net_dev */
{
VOID **ppNetDev = (VOID **)pData;
*ppNetDev = (VOID *)(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_NETDEV_SET:
{
struct wifi_dev *wdev = NULL;
/* set main net_dev */
pAd->net_dev = pData;
#ifdef CONFIG_AP_SUPPORT
if (pAd->OpMode == OPMODE_AP) {
pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev.if_dev = (void *)pData;
pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev.func_dev = (void *)&pAd->ApCfg.MBSSID[MAIN_MBSSID];
pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev.sys_handle = (void *)pAd;
RTMP_OS_NETDEV_SET_WDEV(pData, &pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev);
wdev = &pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev;
}
#endif /* CONFIG_AP_SUPPORT */
if (wdev) {
if (rtmp_wdev_idx_reg(pAd, wdev) < 0) {
DBGPRINT(RT_DEBUG_ERROR, ("Assign wdev idx for %s failed, free net device!\n",
RTMP_OS_NETDEV_GET_DEVNAME(pAd->net_dev)));
RtmpOSNetDevFree(pAd->net_dev);
}
}
break;
}
case CMD_RTPRIV_IOCTL_OPMODE_GET:
/* get Operation Mode */
*(ULONG *)pData = pAd->OpMode;
break;
case CMD_RTPRIV_IOCTL_TASK_LIST_GET:
/* get all Tasks */
{
RT_CMD_WAIT_QUEUE_LIST *pList = (RT_CMD_WAIT_QUEUE_LIST *)pData;
pList->pMlmeTask = &pAd->mlmeTask;
#ifdef RTMP_TIMER_TASK_SUPPORT
pList->pTimerTask = &pAd->timerTask;
#endif /* RTMP_TIMER_TASK_SUPPORT */
pList->pCmdQTask = &pAd->cmdQTask;
#ifdef WSC_INCLUDED
pList->pWscTask = &pAd->wscTask;
#endif /* WSC_INCLUDED */
}
break;
#ifdef RTMP_MAC_PCI
case CMD_RTPRIV_IOCTL_IRQ_INIT:
/* init IRQ */
rtmp_irq_init(pAd);
break;
#endif /* RTMP_MAC_PCI */
case CMD_RTPRIV_IOCTL_IRQ_RELEASE:
/* release IRQ */
RTMP_OS_IRQ_RELEASE(pAd, pAd->net_dev);
break;
#ifdef RTMP_MAC_PCI
case CMD_RTPRIV_IOCTL_MSI_ENABLE:
/* enable MSI */
RTMP_MSI_ENABLE(pAd);
*(ULONG **)pData = (ULONG *)(pObj->pci_dev);
break;
#endif /* RTMP_MAC_PCI */
case CMD_RTPRIV_IOCTL_NIC_NOT_EXIST:
/* set driver state to fRTMP_ADAPTER_NIC_NOT_EXIST */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
break;
case CMD_RTPRIV_IOCTL_MCU_SLEEP_CLEAR:
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_MCU_SLEEP);
break;
case CMD_RTPRIV_IOCTL_SANITY_CHECK:
/* sanity check before IOCTL */
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
#ifdef IFUP_IN_PROBE
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
#endif /* IFUP_IN_PROBE */
)
{
if(pData == NULL || RT_isLegalCmdBeforeInfUp((PSTRING) pData) == FALSE)
return NDIS_STATUS_FAILURE;
}
break;
case CMD_RTPRIV_IOCTL_SIOCGIWFREQ:
/* get channel number */
*(ULONG *)pData = pAd->CommonCfg.Channel;
break;
#ifdef CONFIG_SNIFFER_SUPPORT
case CMD_RTPRIV_IOCTL_SNIFF_INIT:
Monitor_Init(pAd, pData);
break;
case CMD_RTPRIV_IOCTL_SNIFF_OPEN:
if (Monitor_Open(pAd, pData) != TRUE)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_SNIFF_CLOSE:
if (Monitor_Close(pAd, pData) != TRUE)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_SNIFF_REMOVE:
Monitor_Remove(pAd);
break;
#endif /*CONFIG_SNIFFER_SUPPORT*/
case CMD_RTPRIV_IOCTL_BEACON_UPDATE:
/* update all beacon contents */
#ifdef CONFIG_AP_SUPPORT
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif /* CONFIG_AP_SUPPORT */
break;
case CMD_RTPRIV_IOCTL_RXPATH_GET:
/* get the number of rx path */
*(ULONG *)pData = pAd->Antenna.field.RxPath;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_NUM_GET:
*(ULONG *)pData = pAd->ChannelListNum;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_GET:
{
UINT32 i;
UCHAR *pChannel = (UCHAR *)pData;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
*pChannel = pAd->ChannelList[i-1].Channel;
pChannel ++;
}
}
break;
case CMD_RTPRIV_IOCTL_FREQ_LIST_GET:
{
UINT32 i;
UINT32 *pFreq = (UINT32 *)pData;
UINT32 m;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
m = 2412000;
MAP_CHANNEL_ID_TO_KHZ(pAd->ChannelList[i-1].Channel, m);
(*pFreq) = m;
pFreq ++;
}
}
break;
#ifdef EXT_BUILD_CHANNEL_LIST
case CMD_RTPRIV_SET_PRECONFIG_VALUE:
/* Set some preconfigured value before interface up*/
pAd->CommonCfg.DfsType = MAX_RD_REGION;
break;
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef RTMP_PCI_SUPPORT
case CMD_RTPRIV_IOCTL_PCI_SUSPEND:
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_PCI_RESUME:
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_PCI_CSR_SET:
pAd->CSRBaseAddress = (PUCHAR)Data;
DBGPRINT(RT_DEBUG_ERROR, ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n", (ULONG)pAd->CSRBaseAddress, (ULONG)Data));
break;
case CMD_RTPRIV_IOCTL_PCIE_INIT:
RTMPInitPCIeDevice(pData, pAd);
break;
#endif /* RTMP_PCI_SUPPORT */
#ifdef RT_CFG80211_SUPPORT
case CMD_RTPRIV_IOCTL_CFG80211_CFG_START:
RT_CFG80211_REINIT(pAd);
RT_CFG80211_CRDA_REG_RULE_APPLY(pAd);
break;
#endif /* RT_CFG80211_SUPPORT */
#ifdef INF_PPA_SUPPORT
case CMD_RTPRIV_IOCTL_INF_PPA_INIT:
os_alloc_mem(NULL, (UCHAR **)&(pAd->pDirectpathCb), sizeof(PPA_DIRECTPATH_CB));
break;
case CMD_RTPRIV_IOCTL_INF_PPA_EXIT:
if (ppa_hook_directpath_register_dev_fn && (pAd->PPAEnable == TRUE))
{
UINT status;
status = ppa_hook_directpath_register_dev_fn(&pAd->g_if_id, pAd->net_dev, NULL, 0);
DBGPRINT(RT_DEBUG_TRACE, ("Unregister PPA::status=%d, if_id=%d\n", status, pAd->g_if_id));
}
os_free_mem(NULL, pAd->pDirectpathCb);
break;
#endif /* INF_PPA_SUPPORT*/
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP:
/* interface up */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
if (VIRTUAL_IF_NUM(pAd) == 0)
{
if (pInfConf->rt28xx_open(pAd->net_dev) != 0)
{
DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_open return fail!\n"));
return NDIS_STATUS_FAILURE;
}
}
else
{
#ifdef CONFIG_AP_SUPPORT
extern VOID APMakeAllBssBeacon(IN PRTMP_ADAPTER pAd);
extern VOID APUpdateAllBeaconFrame(IN PRTMP_ADAPTER pAd);
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif /* CONFIG_AP_SUPPORT */
}
VIRTUAL_IF_INC(pAd);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN:
/* interface down */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
VIRTUAL_IF_DEC(pAd);
if (VIRTUAL_IF_NUM(pAd) == 0)
pInfConf->rt28xx_close(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_GET:
/* get virtual interface number */
*(ULONG *)pData = VIRTUAL_IF_NUM(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_TYPE_GET:
/* get current interface type */
*(ULONG *)pData = pAd->infType;
break;
case CMD_RTPRIV_IOCTL_INF_STATS_GET:
/* get statistics */
{
RT_CMD_STATS *pStats = (RT_CMD_STATS *)pData;
pStats->pStats = pAd->stats;
if(pAd->OpMode == OPMODE_STA)
{
pStats->rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
pStats->tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
pStats->rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
pStats->tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
pStats->rx_errors = pAd->Counters8023.RxErrors;
pStats->tx_errors = pAd->Counters8023.TxErrors;
pStats->multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; /* multicast packets received*/
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = pAd->Counters8023.RxNoBuffer; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/*pAd->WlanCounters.FCSErrorCount; recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = pAd->Counters8023.RxNoBuffer; /* recv'r fifo overrun*/
}
#ifdef CONFIG_AP_SUPPORT
else if(pAd->OpMode == OPMODE_AP)
{
INT index;
for(index = 0; index < MAX_MBSSID_NUM(pAd); index++)
{
if (pAd->ApCfg.MBSSID[index].wdev.if_dev == (PNET_DEV)(pStats->pNetDev))
{
break;
}
}
if(index >= MAX_MBSSID_NUM(pAd))
{
//reset counters
pStats->rx_packets = 0;
pStats->tx_packets = 0;
pStats->rx_bytes = 0;
pStats->tx_bytes = 0;
pStats->rx_errors = 0;
pStats->tx_errors = 0;
pStats->multicast = 0; /* multicast packets received*/
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = 0; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0; /* recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = 0; /* recv'r fifo overrun*/
DBGPRINT(RT_DEBUG_ERROR, ("CMD_RTPRIV_IOCTL_INF_STATS_GET: can not find mbss I/F\n"));
return NDIS_STATUS_FAILURE;
}
pStats->rx_packets = pAd->ApCfg.MBSSID[index].RxCount;
pStats->tx_packets = pAd->ApCfg.MBSSID[index].TxCount;
pStats->rx_bytes = pAd->ApCfg.MBSSID[index].ReceivedByteCount;
pStats->tx_bytes = pAd->ApCfg.MBSSID[index].TransmittedByteCount;
pStats->rx_errors = pAd->ApCfg.MBSSID[index].RxErrorCount;
pStats->tx_errors = pAd->ApCfg.MBSSID[index].TxErrorCount;
pStats->multicast = pAd->ApCfg.MBSSID[index].mcPktsRx; /* multicast packets received */
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = 0; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/* recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = 0; /* recv'r fifo overrun*/
}
#endif
}
break;
case CMD_RTPRIV_IOCTL_INF_IW_STATUS_GET:
/* get wireless statistics */
{
UCHAR CurOpMode = OPMODE_AP;
#ifdef CONFIG_AP_SUPPORT
PMAC_TABLE_ENTRY pMacEntry = NULL;
#endif /* CONFIG_AP_SUPPORT */
RT_CMD_IW_STATS *pStats = (RT_CMD_IW_STATS *)pData;
pStats->qual = 0;
pStats->level = 0;
pStats->noise = 0;
pStats->pStats = pAd->iw_stats;
/*check if the interface is down*/
if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
return NDIS_STATUS_FAILURE;
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
#ifdef APCLI_SUPPORT
if ((pStats->priv_flags == INT_APCLI)
)
{
INT ApCliIdx = ApCliIfLookUp(pAd, (PUCHAR)pStats->dev_addr);
if ((ApCliIdx >= 0) && VALID_WCID(pAd->ApCfg.ApCliTab[ApCliIdx].MacTabWCID))
pMacEntry = &pAd->MacTab.Content[pAd->ApCfg.ApCliTab[ApCliIdx].MacTabWCID];
}
else
#endif /* APCLI_SUPPORT */
{
/*
only AP client support wireless stats function.
return NULL pointer for all other cases.
*/
pMacEntry = NULL;
}
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
if (pMacEntry != NULL)
pStats->qual = ((pMacEntry->ChannelQuality * 12)/10 + 10);
else
pStats->qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
}
#endif /* CONFIG_AP_SUPPORT */
if (pStats->qual > 100)
pStats->qual = 100;
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
if (pMacEntry != NULL)
pStats->level =
RTMPMaxRssi(pAd, pMacEntry->RssiSample.AvgRssi0,
pMacEntry->RssiSample.AvgRssi1,
pMacEntry->RssiSample.AvgRssi2);
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
pStats->noise = RTMPMaxRssi(pAd, pAd->ApCfg.RssiSample.AvgRssi0,
pAd->ApCfg.RssiSample.AvgRssi1,
pAd->ApCfg.RssiSample.AvgRssi2) -
RTMPMinSnr(pAd, pAd->ApCfg.RssiSample.AvgSnr0,
pAd->ApCfg.RssiSample.AvgSnr1);
#endif /* CONFIG_AP_SUPPORT */
}
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CREATE:
*(VOID **)pData = RtmpPhyNetDevMainCreate(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_ID_GET:
*(ULONG *)pData = INT_MAIN;
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CHECK:
if (Data != INT_MAIN)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_INF_P2P_CHECK:
if (Data != INT_P2P)
return NDIS_STATUS_FAILURE;
break;
#ifdef WDS_SUPPORT
case CMD_RTPRIV_IOCTL_WDS_INIT:
WDS_Init(pAd, pData);
break;
case CMD_RTPRIV_IOCTL_WDS_REMOVE:
WDS_Remove(pAd);
break;
case CMD_RTPRIV_IOCTL_WDS_STATS_GET:
if (Data == INT_WDS)
{
if (WDS_StatsGet(pAd, pData) != TRUE)
return NDIS_STATUS_FAILURE;
}
else
return NDIS_STATUS_FAILURE;
break;
#endif /* WDS_SUPPORT */
#ifdef RALINK_ATE
#ifdef RALINK_QA
case CMD_RTPRIV_IOCTL_ATE:
RtmpDoAte(pAd, wrq, pData);
break;
#endif /* RALINK_QA */
#endif /* RALINK_ATE */
case CMD_RTPRIV_IOCTL_MAC_ADDR_GET:
{
UCHAR mac_addr[MAC_ADDR_LEN];
USHORT Addr01, Addr23, Addr45;
RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
mac_addr[0] = (UCHAR)(Addr01 & 0xff);
mac_addr[1] = (UCHAR)(Addr01 >> 8);
mac_addr[2] = (UCHAR)(Addr23 & 0xff);
mac_addr[3] = (UCHAR)(Addr23 >> 8);
mac_addr[4] = (UCHAR)(Addr45 & 0xff);
mac_addr[5] = (UCHAR)(Addr45 >> 8);
for(i=0; i<6; i++)
*(UCHAR *)(pData+i) = mac_addr[i];
break;
}
#ifdef CONFIG_AP_SUPPORT
case CMD_RTPRIV_IOCTL_AP_SIOCGIWRATEQ:
/* handle for SIOCGIWRATEQ */
{
RT_CMD_IOCTL_RATE *pRate = (RT_CMD_IOCTL_RATE *)pData;
HTTRANSMIT_SETTING HtPhyMode;
UINT8 BW = 0, GI = 0, MCS = 0;
#ifdef APCLI_SUPPORT
if (pRate->priv_flags == INT_APCLI)
memcpy(&HtPhyMode, &pAd->ApCfg.ApCliTab[pObj->ioctl_if].wdev.HTPhyMode, sizeof(HTTRANSMIT_SETTING));
else
#endif /* APCLI_SUPPORT */
#ifdef WDS_SUPPORT
if (pRate->priv_flags == INT_WDS)
memcpy(&HtPhyMode, &pAd->WdsTab.WdsEntry[pObj->ioctl_if].wdev.HTPhyMode, sizeof(HTTRANSMIT_SETTING));
else
#endif /* WDS_SUPPORT */
{
memcpy(&HtPhyMode, &pAd->ApCfg.MBSSID[pObj->ioctl_if].wdev.HTPhyMode, sizeof(HTTRANSMIT_SETTING));
#ifdef MBSS_SUPPORT
/* reset phy mode for MBSS */
MBSS_PHY_MODE_RESET(pObj->ioctl_if, HtPhyMode);
#endif /* MBSS_SUPPORT */
}
#ifdef DOT11_VHT_AC
if (HtPhyMode.field.BW == BW_40 && pAd->CommonCfg.vht_bw == VHT_BW_80 && HtPhyMode.field.MODE >= MODE_VHT) {
BW = 2;
GI = pAd->CommonCfg.vht_sgi_80;
}
else
#endif /* DOT11_VHT_AC */
{
BW = HtPhyMode.field.BW;
GI = HtPhyMode.field.ShortGI;
}
RtmpDrvRateGet(pAd, HtPhyMode.field.MODE, GI,
BW, HtPhyMode.field.MCS,
pAd->Antenna.field.TxPath,
(UINT32 *)&pRate->BitRate);
}
break;
#endif /* CONFIG_AP_SUPPORT */
case CMD_RTPRIV_IOCTL_SIOCGIWNAME:
RtmpIoctl_rt_ioctl_giwname(pAd, pData, 0);
break;
}
#ifdef RT_CFG80211_SUPPORT
if ((CMD_RTPRIV_IOCTL_80211_START <= cmd) &&
(cmd <= CMD_RTPRIV_IOCTL_80211_END))
{
Status = CFG80211DRV_IoctlHandle(pAd, wrq, cmd, subcmd, pData, Data);
}
#endif /* RT_CFG80211_SUPPORT */
if (cmd >= CMD_RTPRIV_IOCTL_80211_COM_LATEST_ONE)
return NDIS_STATUS_FAILURE;
return Status;
}
INT RTMP_COM_IoctlHandle(
IN VOID *pAdSrc,
IN RTMP_IOCTL_INPUT_STRUCT *wrq,
IN INT cmd,
IN USHORT subcmd,
IN VOID *pData,
IN ULONG Data)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
INT Status = NDIS_STATUS_SUCCESS, i;
pObj = pObj; /* avoid compile warning */
switch(cmd)
{
case CMD_RTPRIV_IOCTL_NETDEV_GET:
/* get main net_dev */
{
VOID **ppNetDev = (VOID **)pData;
*ppNetDev = (VOID *)(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_NETDEV_SET:
{
struct wifi_dev *wdev = NULL;
/* set main net_dev */
pAd->net_dev = pData;
#ifdef CONFIG_AP_SUPPORT
if (pAd->OpMode == OPMODE_AP) {
pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev.if_dev = (void *)pData;
pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev.func_dev = (void *)&pAd->ApCfg.MBSSID[MAIN_MBSSID];
pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev.sys_handle = (void *)pAd;
RTMP_OS_NETDEV_SET_WDEV(pData, &pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev);
wdev = &pAd->ApCfg.MBSSID[MAIN_MBSSID].wdev;
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA) {
pAd->StaCfg.wdev.if_dev = pData;
pAd->StaCfg.wdev.func_dev = (void *)&pAd->StaCfg;
pAd->StaCfg.wdev.sys_handle = (void *)pAd;
RTMP_OS_NETDEV_SET_WDEV(pData, &pAd->StaCfg.wdev);
wdev = &pAd->StaCfg.wdev;
}
#endif /* CONFIG_STA_SUPPORT */
if (wdev) {
if (rtmp_wdev_idx_reg(pAd, wdev) < 0) {
DBGPRINT(RT_DEBUG_ERROR, ("Assign wdev idx for %s failed, free net device!\n",
RTMP_OS_NETDEV_GET_DEVNAME(pAd->net_dev)));
RtmpOSNetDevFree(pAd->net_dev);
}
}
break;
}
case CMD_RTPRIV_IOCTL_OPMODE_GET:
/* get Operation Mode */
*(ULONG *)pData = pAd->OpMode;
break;
case CMD_RTPRIV_IOCTL_TASK_LIST_GET:
/* get all Tasks */
{
RT_CMD_WAIT_QUEUE_LIST *pList = (RT_CMD_WAIT_QUEUE_LIST *)pData;
pList->pMlmeTask = &pAd->mlmeTask;
#ifdef RTMP_TIMER_TASK_SUPPORT
pList->pTimerTask = &pAd->timerTask;
#endif /* RTMP_TIMER_TASK_SUPPORT */
pList->pCmdQTask = &pAd->cmdQTask;
}
break;
case CMD_RTPRIV_IOCTL_IRQ_RELEASE:
/* release IRQ */
RTMP_OS_IRQ_RELEASE(pAd, pAd->net_dev);
break;
case CMD_RTPRIV_IOCTL_NIC_NOT_EXIST:
/* set driver state to fRTMP_ADAPTER_NIC_NOT_EXIST */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
break;
case CMD_RTPRIV_IOCTL_MCU_SLEEP_CLEAR:
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_MCU_SLEEP);
break;
#ifdef CONFIG_STA_SUPPORT
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
case CMD_RTPRIV_IOCTL_USB_DEV_GET:
/* get USB DEV */
{
VOID **ppUsb_Dev = (VOID **)pData;
*ppUsb_Dev = (VOID *)(pObj->pUsb_Dev);
}
break;
case CMD_RTPRIV_IOCTL_USB_INTF_GET:
/* get USB INTF */
{
VOID **ppINTF = (VOID **)pData;
*ppINTF = (VOID *)(pObj->intf);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_SET:
/* set driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_SET_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_CLEAR:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_CLEAR_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD);
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_MCU_SLEEP);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SEND_DISSASSOCIATE:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
os_free_mem(NULL, MsgElem);
}
/* RtmpusecDelay(1000);*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CGIWAP, -1, NULL, NULL, 0);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_TEST:
/* test driver state to fRTMP_ADAPTER_SUSPEND */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_IDLE_RADIO_OFF_TEST:
/* test driver state to fRTMP_ADAPTER_IDLE_RADIO_OFF */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_IDLE_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_OFF:
ASIC_RADIO_OFF(pAd, SUSPEND_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_ON:
ASIC_RADIO_ON(pAd, RESUME_RADIO_ON);
break;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#if (defined(WOW_SUPPORT) && defined(RTMP_MAC_USB)) || defined(NEW_WOW_SUPPORT)
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_WOW_STATUS:
*(UCHAR *)pData = (UCHAR)pAd->WOW_Cfg.bEnable;
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_WOW_ENABLE:
ASIC_WOW_ENABLE(pAd);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_WOW_DISABLE:
ASIC_WOW_DISABLE(pAd);
break;
#endif /* (defined(WOW_SUPPORT) && defined(RTMP_MAC_USB)) || defined(NEW_WOW_SUPPORT) */
#endif /* CONFIG_PM */
case CMD_RTPRIV_IOCTL_AP_BSSID_GET:
if (pAd->StaCfg.wdev.PortSecured == WPA_802_1X_PORT_NOT_SECURED)
NdisCopyMemory(pData, pAd->MlmeAux.Bssid, 6);
else
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_SET:
/* set driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_SET_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_CLEAR:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_CLEAR_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_OFF:
/* RT28xxUsbAsicRadioOff */
//RT28xxUsbAsicRadioOff(pAd);
ASIC_RADIO_OFF(pAd, SUSPEND_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_ON:
/* RT28xxUsbAsicRadioOn */
//RT28xxUsbAsicRadioOn(pAd);
ASIC_RADIO_ON(pAd, RESUME_RADIO_ON);
break;
#endif /* CONFIG_STA_SUPPORT */
case CMD_RTPRIV_IOCTL_SANITY_CHECK:
/* sanity check before IOCTL */
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
#ifdef IFUP_IN_PROBE
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
#endif /* IFUP_IN_PROBE */
)
{
if(pData == NULL || RT_isLegalCmdBeforeInfUp((PSTRING) pData) == FALSE)
return NDIS_STATUS_FAILURE;
}
break;
case CMD_RTPRIV_IOCTL_SIOCGIWFREQ:
/* get channel number */
*(ULONG *)pData = pAd->CommonCfg.Channel;
break;
case CMD_RTPRIV_IOCTL_BEACON_UPDATE:
/* update all beacon contents */
#ifdef CONFIG_AP_SUPPORT
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif /* CONFIG_AP_SUPPORT */
break;
case CMD_RTPRIV_IOCTL_RXPATH_GET:
/* get the number of rx path */
*(ULONG *)pData = pAd->Antenna.field.RxPath;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_NUM_GET:
*(ULONG *)pData = pAd->ChannelListNum;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_GET:
{
UINT32 i;
UCHAR *pChannel = (UCHAR *)pData;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
*pChannel = pAd->ChannelList[i-1].Channel;
pChannel ++;
}
}
break;
case CMD_RTPRIV_IOCTL_FREQ_LIST_GET:
{
UINT32 i;
UINT32 *pFreq = (UINT32 *)pData;
UINT32 m;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
m = 2412000;
MAP_CHANNEL_ID_TO_KHZ(pAd->ChannelList[i-1].Channel, m);
(*pFreq) = m;
pFreq ++;
}
}
break;
#ifdef EXT_BUILD_CHANNEL_LIST
case CMD_RTPRIV_SET_PRECONFIG_VALUE:
/* Set some preconfigured value before interface up*/
pAd->CommonCfg.DfsType = MAX_RD_REGION;
break;
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef RTMP_USB_SUPPORT
case CMD_RTPRIV_IOCTL_USB_MORE_FLAG_SET:
{
RT_CMD_USB_MORE_FLAG_CONFIG *pConfig;
UINT32 VendorID, ProductID;
pConfig = (RT_CMD_USB_MORE_FLAG_CONFIG *)pData;
VendorID = pConfig->VendorID;
ProductID = pConfig->ProductID;
if (VendorID == 0x0DB0)
{
if ((ProductID == 0x871C) || (ProductID == 0x822C))
{
RTMP_SET_MORE_FLAG(pAd, (fRTMP_ADAPTER_DISABLE_DOT_11N | fRTMP_ADAPTER_WSC_PBC_PIN0));
}
if ((ProductID == 0x871A) || (ProductID == 0x822A))
{
RTMP_SET_MORE_FLAG(pAd, fRTMP_ADAPTER_DISABLE_DOT_11N);
}
if ((ProductID == 0x871B) || (ProductID == 0x822B))
{
RTMP_SET_MORE_FLAG(pAd, fRTMP_ADAPTER_WSC_PBC_PIN0);
}
}
if (VendorID == 0x07D1)
{
if (ProductID == 0x3C0F)
RTMP_SET_MORE_FLAG(pAd, fRTMP_ADAPTER_DISABLE_DOT_11N);
}
}
break;
case CMD_RTPRIV_IOCTL_USB_CONFIG_INIT:
{
RT_CMD_USB_DEV_CONFIG *pConfig;
UINT32 i;
pConfig = (RT_CMD_USB_DEV_CONFIG *)pData;
pAd->NumberOfPipes = pConfig->NumberOfPipes;
pAd->BulkInMaxPacketSize = pConfig->BulkInMaxPacketSize;
pAd->BulkOutMaxPacketSize = pConfig->BulkOutMaxPacketSize;
for (i = 0; i < 6; i++)
pAd->BulkOutEpAddr[i] = pConfig->BulkOutEpAddr[i];
for (i = 0; i < 2; i++)
pAd->BulkInEpAddr[i] = pConfig->BulkInEpAddr[i];
pAd->config = pConfig->pConfig;
}
break;
case CMD_RTPRIV_IOCTL_USB_SUSPEND:
pAd->PM_FlgSuspend = 1;
if (Data)
{
RTUSBCancelPendingBulkInIRP(pAd);
RTUSBCancelPendingBulkOutIRP(pAd);
}
break;
case CMD_RTPRIV_IOCTL_USB_RESUME:
pAd->PM_FlgSuspend = 0;
break;
case CMD_RTPRIV_IOCTL_USB_INIT:
InitUSBDevice(pData, pAd);
break;
#endif /* RTMP_USB_SUPPORT */
#ifdef RT_CFG80211_SUPPORT
case CMD_RTPRIV_IOCTL_CFG80211_CFG_START:
RT_CFG80211_REINIT(pAd);
RT_CFG80211_CRDA_REG_RULE_APPLY(pAd);
break;
#endif /* RT_CFG80211_SUPPORT */
#ifdef INF_PPA_SUPPORT
case CMD_RTPRIV_IOCTL_INF_PPA_INIT:
os_alloc_mem(NULL, (UCHAR **)&(pAd->pDirectpathCb), sizeof(PPA_DIRECTPATH_CB));
break;
case CMD_RTPRIV_IOCTL_INF_PPA_EXIT:
if (ppa_hook_directpath_register_dev_fn && (pAd->PPAEnable == TRUE))
{
UINT status;
status = ppa_hook_directpath_register_dev_fn(&pAd->g_if_id, pAd->net_dev, NULL, 0);
DBGPRINT(RT_DEBUG_TRACE, ("Unregister PPA::status=%d, if_id=%d\n", status, pAd->g_if_id));
}
os_free_mem(NULL, pAd->pDirectpathCb);
break;
#endif /* INF_PPA_SUPPORT*/
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP:
/* interface up */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
if (VIRTUAL_IF_NUM(pAd) == 0)
{
if (pInfConf->rt28xx_open(pAd->net_dev) != 0)
{
DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_open return fail!\n"));
return NDIS_STATUS_FAILURE;
}
}
else
{
#ifdef CONFIG_AP_SUPPORT
extern VOID APMakeAllBssBeacon(IN PRTMP_ADAPTER pAd);
extern VOID APUpdateAllBeaconFrame(IN PRTMP_ADAPTER pAd);
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif /* CONFIG_AP_SUPPORT */
}
VIRTUAL_IF_INC(pAd);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN:
/* interface down */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
VIRTUAL_IF_DEC(pAd);
if (VIRTUAL_IF_NUM(pAd) == 0)
pInfConf->rt28xx_close(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_GET:
/* get virtual interface number */
*(ULONG *)pData = VIRTUAL_IF_NUM(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_TYPE_GET:
/* get current interface type */
*(ULONG *)pData = pAd->infType;
break;
case CMD_RTPRIV_IOCTL_INF_STATS_GET:
/* get statistics */
{
RT_CMD_STATS *pStats = (RT_CMD_STATS *)pData;
pStats->pStats = pAd->stats;
if(pAd->OpMode == OPMODE_STA)
{
pStats->rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
pStats->tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
pStats->rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
pStats->tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
pStats->rx_errors = pAd->Counters8023.RxErrors;
pStats->tx_errors = pAd->Counters8023.TxErrors;
pStats->multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; /* multicast packets received*/
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = pAd->Counters8023.RxNoBuffer; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/*pAd->WlanCounters.FCSErrorCount; recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = pAd->Counters8023.RxNoBuffer; /* recv'r fifo overrun*/
}
#ifdef CONFIG_AP_SUPPORT
else if(pAd->OpMode == OPMODE_AP)
{
INT index;
for(index = 0; index < MAX_MBSSID_NUM(pAd); index++)
{
if (pAd->ApCfg.MBSSID[index].wdev.if_dev == (PNET_DEV)(pStats->pNetDev))
{
break;
}
}
if(index >= MAX_MBSSID_NUM(pAd))
{
//reset counters
pStats->rx_packets = 0;
pStats->tx_packets = 0;
pStats->rx_bytes = 0;
pStats->tx_bytes = 0;
pStats->rx_errors = 0;
pStats->tx_errors = 0;
pStats->multicast = 0; /* multicast packets received*/
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = 0; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0; /* recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = 0; /* recv'r fifo overrun*/
DBGPRINT(RT_DEBUG_ERROR, ("CMD_RTPRIV_IOCTL_INF_STATS_GET: can not find mbss I/F\n"));
return NDIS_STATUS_FAILURE;
}
pStats->rx_packets = pAd->ApCfg.MBSSID[index].RxCount;
pStats->tx_packets = pAd->ApCfg.MBSSID[index].TxCount;
pStats->rx_bytes = pAd->ApCfg.MBSSID[index].ReceivedByteCount;
pStats->tx_bytes = pAd->ApCfg.MBSSID[index].TransmittedByteCount;
pStats->rx_errors = pAd->ApCfg.MBSSID[index].RxErrorCount;
pStats->tx_errors = pAd->ApCfg.MBSSID[index].TxErrorCount;
pStats->multicast = pAd->ApCfg.MBSSID[index].mcPktsRx; /* multicast packets received */
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = 0; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/* recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = 0; /* recv'r fifo overrun*/
}
#endif
}
break;
case CMD_RTPRIV_IOCTL_INF_IW_STATUS_GET:
/* get wireless statistics */
{
UCHAR CurOpMode = OPMODE_AP;
#ifdef CONFIG_AP_SUPPORT
PMAC_TABLE_ENTRY pMacEntry = NULL;
#endif /* CONFIG_AP_SUPPORT */
RT_CMD_IW_STATS *pStats = (RT_CMD_IW_STATS *)pData;
pStats->qual = 0;
pStats->level = 0;
pStats->noise = 0;
pStats->pStats = pAd->iw_stats;
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA)
{
CurOpMode = OPMODE_STA;
}
#endif /* CONFIG_STA_SUPPORT */
/*check if the interface is down*/
if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
return NDIS_STATUS_FAILURE;
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
#ifdef APCLI_SUPPORT
if ((pStats->priv_flags == INT_APCLI)
)
{
INT ApCliIdx = ApCliIfLookUp(pAd, (PUCHAR)pStats->dev_addr);
if ((ApCliIdx >= 0) && VALID_WCID(pAd->ApCfg.ApCliTab[ApCliIdx].MacTabWCID))
pMacEntry = &pAd->MacTab.Content[pAd->ApCfg.ApCliTab[ApCliIdx].MacTabWCID];
}
else
#endif /* APCLI_SUPPORT */
{
/*
only AP client support wireless stats function.
return NULL pointer for all other cases.
*/
pMacEntry = NULL;
}
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
pStats->qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
if (pMacEntry != NULL)
pStats->qual = ((pMacEntry->ChannelQuality * 12)/10 + 10);
else
pStats->qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
}
#endif /* CONFIG_AP_SUPPORT */
if (pStats->qual > 100)
pStats->qual = 100;
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
{
pStats->level =
RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2);
}
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
if (pMacEntry != NULL)
pStats->level =
RTMPMaxRssi(pAd, pMacEntry->RssiSample.AvgRssi0,
pMacEntry->RssiSample.AvgRssi1,
pMacEntry->RssiSample.AvgRssi2);
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
pStats->noise = RTMPMaxRssi(pAd, pAd->ApCfg.RssiSample.AvgRssi0,
pAd->ApCfg.RssiSample.AvgRssi1,
pAd->ApCfg.RssiSample.AvgRssi2) -
RTMPMinSnr(pAd, pAd->ApCfg.RssiSample.AvgSnr0,
pAd->ApCfg.RssiSample.AvgSnr1);
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
pStats->noise = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2) -
RTMPMinSnr(pAd, pAd->StaCfg.RssiSample.AvgSnr0,
pAd->StaCfg.RssiSample.AvgSnr1);
#endif /* CONFIG_STA_SUPPORT */
}
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CREATE:
*(VOID **)pData = RtmpPhyNetDevMainCreate(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_ID_GET:
*(ULONG *)pData = INT_MAIN;
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CHECK:
if (Data != INT_MAIN)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_INF_P2P_CHECK:
if (Data != INT_P2P)
return NDIS_STATUS_FAILURE;
break;
#ifdef RALINK_ATE
#endif /* RALINK_ATE */
case CMD_RTPRIV_IOCTL_MAC_ADDR_GET:
{
UCHAR mac_addr[MAC_ADDR_LEN];
USHORT Addr01, Addr23, Addr45;
RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
mac_addr[0] = (UCHAR)(Addr01 & 0xff);
mac_addr[1] = (UCHAR)(Addr01 >> 8);
mac_addr[2] = (UCHAR)(Addr23 & 0xff);
mac_addr[3] = (UCHAR)(Addr23 >> 8);
mac_addr[4] = (UCHAR)(Addr45 & 0xff);
mac_addr[5] = (UCHAR)(Addr45 >> 8);
for(i=0; i<6; i++)
*(UCHAR *)(pData+i) = mac_addr[i];
break;
}
#ifdef CONFIG_AP_SUPPORT
case CMD_RTPRIV_IOCTL_AP_SIOCGIWRATEQ:
/* handle for SIOCGIWRATEQ */
{
RT_CMD_IOCTL_RATE *pRate = (RT_CMD_IOCTL_RATE *)pData;
HTTRANSMIT_SETTING HtPhyMode;
UINT8 BW = 0, GI = 0, MCS = 0;
#ifdef APCLI_SUPPORT
if (pRate->priv_flags == INT_APCLI)
memcpy(&HtPhyMode, &pAd->ApCfg.ApCliTab[pObj->ioctl_if].wdev.HTPhyMode, sizeof(HTTRANSMIT_SETTING));
else
#endif /* APCLI_SUPPORT */
{
memcpy(&HtPhyMode, &pAd->ApCfg.MBSSID[pObj->ioctl_if].wdev.HTPhyMode, sizeof(HTTRANSMIT_SETTING));
#ifdef MBSS_SUPPORT
/* reset phy mode for MBSS */
MBSS_PHY_MODE_RESET(pObj->ioctl_if, HtPhyMode);
#endif /* MBSS_SUPPORT */
}
#ifdef DOT11_VHT_AC
if (HtPhyMode.field.BW == BW_40 && pAd->CommonCfg.vht_bw == VHT_BW_80 && HtPhyMode.field.MODE >= MODE_VHT) {
BW = 2;
GI = pAd->CommonCfg.vht_sgi_80;
}
else
#endif /* DOT11_VHT_AC */
{
BW = HtPhyMode.field.BW;
GI = HtPhyMode.field.ShortGI;
}
RtmpDrvRateGet(pAd, HtPhyMode.field.MODE, GI,
BW, HtPhyMode.field.MCS,
pAd->Antenna.field.TxPath,
(UINT32 *)&pRate->BitRate);
}
break;
#endif /* CONFIG_AP_SUPPORT */
case CMD_RTPRIV_IOCTL_SIOCGIWNAME:
RtmpIoctl_rt_ioctl_giwname(pAd, pData, 0);
break;
}
#ifdef RT_CFG80211_SUPPORT
if ((CMD_RTPRIV_IOCTL_80211_START <= cmd) &&
(cmd <= CMD_RTPRIV_IOCTL_80211_END))
{
Status = CFG80211DRV_IoctlHandle(pAd, wrq, cmd, subcmd, pData, Data);
}
#endif /* RT_CFG80211_SUPPORT */
if (cmd >= CMD_RTPRIV_IOCTL_80211_COM_LATEST_ONE)
return NDIS_STATUS_FAILURE;
return Status;
}
INT RTMP_COM_IoctlHandle(
IN VOID *pAdSrc,
IN RTMP_IOCTL_INPUT_STRUCT *wrq,
IN INT cmd,
IN USHORT subcmd,
IN VOID *pData,
IN ULONG Data)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
INT Status = NDIS_STATUS_SUCCESS, i;
UCHAR PermanentAddress[MAC_ADDR_LEN];
USHORT Addr01, Addr23, Addr45;
pObj = pObj; /* avoid compile warning */
switch(cmd)
{
case CMD_RTPRIV_IOCTL_NETDEV_GET:
/* get main net_dev */
{
VOID **ppNetDev = (VOID **)pData;
*ppNetDev = (VOID *)(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_NETDEV_SET:
/* set main net_dev */
pAd->net_dev = pData;
#ifdef CONFIG_AP_SUPPORT
pAd->ApCfg.MBSSID[MAIN_MBSSID].MSSIDDev = pData;
#endif /* CONFIG_AP_SUPPORT */
break;
case CMD_RTPRIV_IOCTL_OPMODE_GET:
/* get Operation Mode */
*(ULONG *)pData = pAd->OpMode;
break;
case CMD_RTPRIV_IOCTL_TASK_LIST_GET:
/* get all Tasks */
{
RT_CMD_WAIT_QUEUE_LIST *pList = (RT_CMD_WAIT_QUEUE_LIST *)pData;
pList->pMlmeTask = &pAd->mlmeTask;
#ifdef RTMP_TIMER_TASK_SUPPORT
pList->pTimerTask = &pAd->timerTask;
#endif /* RTMP_TIMER_TASK_SUPPORT */
pList->pCmdQTask = &pAd->cmdQTask;
#ifdef WSC_INCLUDED
pList->pWscTask = &pAd->wscTask;
#endif /* WSC_INCLUDED */
}
break;
case CMD_RTPRIV_IOCTL_IRQ_INIT:
/* init IRQ */
RTMP_IRQ_INIT(pAd);
break;
case CMD_RTPRIV_IOCTL_IRQ_RELEASE:
/* release IRQ */
RTMP_OS_IRQ_RELEASE(pAd, pAd->net_dev);
break;
case CMD_RTPRIV_IOCTL_NIC_NOT_EXIST:
/* set driver state to fRTMP_ADAPTER_NIC_NOT_EXIST */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
break;
case CMD_RTPRIV_IOCTL_MCU_SLEEP_CLEAR:
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_MCU_SLEEP);
break;
#ifdef CONFIG_APSTA_MIXED_SUPPORT
case CMD_RTPRIV_IOCTL_MAX_IN_BIT:
/* set MAX_IN_BIT for WMM */
CW_MAX_IN_BITS = Data;
break;
#endif /* CONFIG_APSTA_MIXED_SUPPORT */
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_SET:
/* set driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_SET_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_CLEAR:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_CLEAR_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_OFF:
/* RT28xxUsbAsicRadioOff */
//RT28xxUsbAsicRadioOff(pAd);
ASIC_RADIO_OFF(pAd, SUSPEND_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_ON:
/* RT28xxUsbAsicRadioOn */
//RT28xxUsbAsicRadioOn(pAd);
ASIC_RADIO_ON(pAd, RESUME_RADIO_ON);
break;
case CMD_RTPRIV_IOCTL_SANITY_CHECK:
/* sanity check before IOCTL */
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
#ifdef IFUP_IN_PROBE
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
#endif /* IFUP_IN_PROBE */
)
{
if(pData == NULL || RT_isLegalCmdBeforeInfUp((PSTRING) pData) == FALSE)
return NDIS_STATUS_FAILURE;
}
break;
case CMD_RTPRIV_IOCTL_SIOCGIWFREQ:
/* get channel number */
*(ULONG *)pData = pAd->CommonCfg.Channel;
break;
case CMD_RTPRIV_IOCTL_BEACON_UPDATE:
/* update all beacon contents */
#ifdef CONFIG_AP_SUPPORT
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif /* CONFIG_AP_SUPPORT */
break;
case CMD_RTPRIV_IOCTL_RXPATH_GET:
/* get the number of rx path */
*(ULONG *)pData = pAd->Antenna.field.RxPath;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_NUM_GET:
*(ULONG *)pData = pAd->ChannelListNum;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_GET:
{
UINT32 i;
UCHAR *pChannel = (UCHAR *)pData;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
*pChannel = pAd->ChannelList[i-1].Channel;
pChannel ++;
}
}
break;
case CMD_RTPRIV_IOCTL_FREQ_LIST_GET:
{
UINT32 i;
UINT32 *pFreq = (UINT32 *)pData;
UINT32 m;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
m = 2412000;
MAP_CHANNEL_ID_TO_KHZ(pAd->ChannelList[i-1].Channel, m);
(*pFreq) = m;
pFreq++;
}
}
break;
#ifdef EXT_BUILD_CHANNEL_LIST
case CMD_RTPRIV_SET_PRECONFIG_VALUE:
/* Set some preconfigured value before interface up*/
pAd->CommonCfg.DfsType = MAX_RD_REGION;
break;
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef RTMP_USB_SUPPORT
case CMD_RTPRIV_IOCTL_USB_MORE_FLAG_SET:
{
RT_CMD_USB_MORE_FLAG_CONFIG *pConfig;
UINT32 VendorID, ProductID;
pConfig = (RT_CMD_USB_MORE_FLAG_CONFIG *)pData;
VendorID = pConfig->VendorID;
ProductID = pConfig->ProductID;
if (VendorID == 0x0DB0)
{
if ((ProductID == 0x871C) || (ProductID == 0x822C))
RTMP_SET_MORE_FLAG(pAd, (fRTMP_ADAPTER_DISABLE_DOT_11N | fRTMP_ADAPTER_WSC_PBC_PIN0));
if ((ProductID == 0x871A) || (ProductID == 0x822A))
RTMP_SET_MORE_FLAG(pAd, fRTMP_ADAPTER_DISABLE_DOT_11N);
if ((ProductID == 0x871B) || (ProductID == 0x822B))
RTMP_SET_MORE_FLAG(pAd, fRTMP_ADAPTER_WSC_PBC_PIN0);
}
if (VendorID == 0x07D1)
{
if (ProductID == 0x3C0F)
RTMP_SET_MORE_FLAG(pAd, fRTMP_ADAPTER_DISABLE_DOT_11N);
}
}
break;
case CMD_RTPRIV_IOCTL_USB_CONFIG_INIT:
{
RT_CMD_USB_DEV_CONFIG *pConfig;
UINT32 i;
pConfig = (RT_CMD_USB_DEV_CONFIG *)pData;
pAd->NumberOfPipes = pConfig->NumberOfPipes;
pAd->BulkInMaxPacketSize = pConfig->BulkInMaxPacketSize;
pAd->BulkOutMaxPacketSize = pConfig->BulkOutMaxPacketSize;
for (i = 0; i < 6; i++) {
pAd->BulkOutEpAddr[i] = pConfig->BulkOutEpAddr[i];
DBGPRINT(RT_DEBUG_OFF, ("%s():pAd->BulkOutEpAddr=0x%x\n", __FUNCTION__, pAd->BulkOutEpAddr[i]));
}
for (i = 0; i < 2; i++)
pAd->BulkInEpAddr[i] = pConfig->BulkInEpAddr[i];
pAd->config = pConfig->pConfig;
}
break;
case CMD_RTPRIV_IOCTL_USB_SUSPEND:
pAd->PM_FlgSuspend = 1;
if (Data)
{
RTUSBCancelPendingBulkInIRP(pAd);
RTUSBCancelPendingBulkOutIRP(pAd);
}
break;
case CMD_RTPRIV_IOCTL_USB_RESUME:
pAd->PM_FlgSuspend = 0;
break;
#endif /* RTMP_USB_SUPPORT */
#ifdef RT_CFG80211_SUPPORT
case CMD_RTPRIV_IOCTL_CFG80211_CFG_START:
RT_CFG80211_REINIT(pAd);
RT_CFG80211_CRDA_REG_RULE_APPLY(pAd);
break;
#endif /* RT_CFG80211_SUPPORT */
#ifdef INF_PPA_SUPPORT
case CMD_RTPRIV_IOCTL_INF_PPA_INIT:
os_alloc_mem(NULL, (UCHAR **)&(pAd->pDirectpathCb), sizeof(PPA_DIRECTPATH_CB));
break;
case CMD_RTPRIV_IOCTL_INF_PPA_EXIT:
if (ppa_hook_directpath_register_dev_fn && pAd->PPAEnable==TRUE)
{
UINT status;
status=ppa_hook_directpath_register_dev_fn(&pAd->g_if_id, pAd->net_dev, NULL, 0);
DBGPRINT(RT_DEBUG_TRACE, ("unregister PPA:g_if_id=%d status=%d\n",pAd->g_if_id,status));
}
os_free_mem(NULL, pAd->pDirectpathCb);
break;
#endif /* INF_PPA_SUPPORT*/
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP:
/* interface up */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
if (VIRTUAL_IF_NUM(pAd) == 0)
{
if (pInfConf->rt28xx_open(pAd->net_dev) != 0)
{
DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_open return fail!\n"));
return NDIS_STATUS_FAILURE;
}
}
#ifdef CONFIG_AP_SUPPORT
else
{
extern VOID APMakeAllBssBeacon(IN PRTMP_ADAPTER pAd);
extern VOID APUpdateAllBeaconFrame(IN PRTMP_ADAPTER pAd);
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif /* CONFIG_AP_SUPPORT */
}
VIRTUAL_IF_INC(pAd);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN:
/* interface down */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
VIRTUAL_IF_DEC(pAd);
if (VIRTUAL_IF_NUM(pAd) == 0)
pInfConf->rt28xx_close(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_GET:
/* get virtual interface number */
*(ULONG *)pData = VIRTUAL_IF_NUM(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_TYPE_GET:
/* get current interface type */
*(ULONG *)pData = pAd->infType;
break;
case CMD_RTPRIV_IOCTL_INF_STATS_GET:
/* get statistics */
{
RT_CMD_STATS *pStats = (RT_CMD_STATS *)pData;
pStats->pStats = pAd->stats;
if(pAd->OpMode == OPMODE_STA)
{
pStats->rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
pStats->tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
pStats->rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
pStats->tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
pStats->rx_errors = pAd->Counters8023.RxErrors;
pStats->tx_errors = pAd->Counters8023.TxErrors;
pStats->multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; /* multicast packets received*/
pStats->collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions; /* Collision packets*/
pStats->rx_over_errors = pAd->Counters8023.RxNoBuffer; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/*pAd->WlanCounters.FCSErrorCount; recved pkt with crc error*/
pStats->rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = pAd->Counters8023.RxNoBuffer; /* recv'r fifo overrun*/
}
#ifdef CONFIG_AP_SUPPORT
else if (pAd->OpMode == OPMODE_AP)
{
INT index;
for(index = 0; index < MAX_MBSSID_NUM(pAd); index++)
{
if (pAd->ApCfg.MBSSID[index].MSSIDDev == (PNET_DEV)(pStats->pNetDev))
break;
}
if (index >= MAX_MBSSID_NUM(pAd))
{
//reset counters
pStats->rx_packets = 0;
pStats->tx_packets = 0;
pStats->rx_bytes = 0;
pStats->tx_bytes = 0;
pStats->rx_errors = 0;
pStats->tx_errors = 0;
pStats->multicast = 0; /* multicast packets received*/
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = 0; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0; /* recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = 0; /* recv'r fifo overrun*/
DBGPRINT(RT_DEBUG_ERROR, ("CMD_RTPRIV_IOCTL_INF_STATS_GET: can not find mbss I/F\n"));
return NDIS_STATUS_FAILURE;
}
pStats->rx_packets = pAd->ApCfg.MBSSID[index].RxCount;
pStats->tx_packets = pAd->ApCfg.MBSSID[index].TxCount;
pStats->rx_bytes = pAd->ApCfg.MBSSID[index].ReceivedByteCount;
pStats->tx_bytes = pAd->ApCfg.MBSSID[index].TransmittedByteCount;
pStats->rx_errors = pAd->ApCfg.MBSSID[index].RxErrorCount;
pStats->tx_errors = pAd->ApCfg.MBSSID[index].TxErrorCount;
pStats->multicast = pAd->ApCfg.MBSSID[index].mcPktsRx; /* multicast packets received */
pStats->collisions = 0; /* Collision packets*/
pStats->rx_over_errors = 0; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0; /* recved pkt with crc error*/
pStats->rx_frame_errors = 0; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = 0; /* recv'r fifo overrun*/
}
#endif
}
break;
case CMD_RTPRIV_IOCTL_INF_IW_STATUS_GET:
/* get wireless statistics */
{
UCHAR CurOpMode = OPMODE_AP;
#ifdef CONFIG_AP_SUPPORT
PMAC_TABLE_ENTRY pMacEntry = NULL;
#endif /* CONFIG_AP_SUPPORT */
RT_CMD_IW_STATS *pStats = (RT_CMD_IW_STATS *)pData;
pStats->qual = 0;
pStats->level = 0;
pStats->noise = 0;
pStats->pStats = pAd->iw_stats;
/*check if the interface is down*/
if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
return NDIS_STATUS_FAILURE;
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
#ifdef APCLI_SUPPORT
if ((pStats->priv_flags == INT_APCLI))
{
INT ApCliIdx = ApCliIfLookUp(pAd, (PUCHAR)pStats->dev_addr);
if ((ApCliIdx >= 0) && VALID_WCID(pAd->ApCfg.ApCliTab[ApCliIdx].MacTabWCID))
pMacEntry = &pAd->MacTab.Content[pAd->ApCfg.ApCliTab[ApCliIdx].MacTabWCID];
}
else
#endif /* APCLI_SUPPORT */
{
/*
only AP client support wireless stats function.
return NULL pointer for all other cases.
*/
pMacEntry = NULL;
}
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
if (pMacEntry != NULL)
pStats->qual = ((pMacEntry->ChannelQuality * 12) / 10 + 10);
else
pStats->qual = ((pAd->Mlme.ChannelQuality * 12) / 10 + 10);
}
#endif /* CONFIG_AP_SUPPORT */
if (pStats->qual > 100)
pStats->qual = 100;
#ifdef CONFIG_AP_SUPPORT
if (CurOpMode == OPMODE_AP)
{
if (pMacEntry != NULL)
pStats->level = RTMPMaxRssi(pAd, pMacEntry->RssiSample.AvgRssi0,
pMacEntry->RssiSample.AvgRssi1,
pMacEntry->RssiSample.AvgRssi2);
}
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
pStats->noise = RTMPMaxRssi(pAd, pAd->ApCfg.RssiSample.AvgRssi0,
pAd->ApCfg.RssiSample.AvgRssi1,
pAd->ApCfg.RssiSample.AvgRssi2) -
RTMPMinSnr(pAd, pAd->ApCfg.RssiSample.AvgSnr0,
pAd->ApCfg.RssiSample.AvgSnr1);
#endif /* CONFIG_AP_SUPPORT */
}
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CREATE:
*(VOID **)pData = RtmpPhyNetDevMainCreate(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_ID_GET:
*(ULONG *)pData = INT_MAIN;
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CHECK:
if (Data != INT_MAIN)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_INF_P2P_CHECK:
if (Data != INT_P2P)
return NDIS_STATUS_FAILURE;
break;
#ifdef WDS_SUPPORT
case CMD_RTPRIV_IOCTL_WDS_INIT:
WDS_Init(pAd, pData);
break;
case CMD_RTPRIV_IOCTL_WDS_REMOVE:
WDS_Remove(pAd);
break;
case CMD_RTPRIV_IOCTL_WDS_STATS_GET:
if (Data == INT_WDS)
{
if (WDS_StatsGet(pAd, pData) != TRUE)
return NDIS_STATUS_FAILURE;
}
else
return NDIS_STATUS_FAILURE;
break;
#endif /* WDS_SUPPORT */
#ifdef RALINK_ATE
#ifdef RALINK_QA
case CMD_RTPRIV_IOCTL_ATE:
RtmpDoAte(pAd, wrq, pData);
break;
#endif /* RALINK_QA */
#endif /* RALINK_ATE */
case CMD_RTPRIV_IOCTL_MAC_ADDR_GET:
RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
PermanentAddress[0] = (UCHAR)(Addr01 & 0xff);
PermanentAddress[1] = (UCHAR)(Addr01 >> 8);
PermanentAddress[2] = (UCHAR)(Addr23 & 0xff);
PermanentAddress[3] = (UCHAR)(Addr23 >> 8);
PermanentAddress[4] = (UCHAR)(Addr45 & 0xff);
PermanentAddress[5] = (UCHAR)(Addr45 >> 8);
for(i = 0; i < 6; i++)
*(UCHAR *)(pData+i) = PermanentAddress[i];
break;
#ifdef CONFIG_AP_SUPPORT
case CMD_RTPRIV_IOCTL_AP_SIOCGIWRATEQ:
/* handle for SIOCGIWRATEQ */
{
RT_CMD_IOCTL_RATE *pRate = (RT_CMD_IOCTL_RATE *)pData;
HTTRANSMIT_SETTING HtPhyMode;
#ifdef APCLI_SUPPORT
if (pRate->priv_flags == INT_APCLI)
HtPhyMode = pAd->ApCfg.ApCliTab[pObj->ioctl_if].HTPhyMode;
else
#endif /* APCLI_SUPPORT */
#ifdef WDS_SUPPORT
if (pRate->priv_flags == INT_WDS)
HtPhyMode = pAd->WdsTab.WdsEntry[pObj->ioctl_if].HTPhyMode;
else
#endif /* WDS_SUPPORT */
{
HtPhyMode = pAd->ApCfg.MBSSID[pObj->ioctl_if].HTPhyMode;
#ifdef MBSS_SUPPORT
/* reset phy mode for MBSS */
MBSS_PHY_MODE_RESET(pObj->ioctl_if, HtPhyMode);
#endif /* MBSS_SUPPORT */
}
RtmpDrvMaxRateGet(pAd, HtPhyMode.field.MODE, HtPhyMode.field.ShortGI,
HtPhyMode.field.BW, HtPhyMode.field.MCS,
(UINT32 *)&pRate->BitRate);
}
break;
#endif /* CONFIG_AP_SUPPORT */
case CMD_RTPRIV_IOCTL_SIOCGIWNAME:
RtmpIoctl_rt_ioctl_giwname(pAd, pData, 0);
break;
#if defined(CONFIG_CSO_SUPPORT) || defined(CONFIG_RX_CSO_SUPPORT)
case CMD_RTPRIV_IOCTL_ADAPTER_CSO_SUPPORT_TEST:
*(UCHAR *)pData = (pAd->MoreFlags & fASIC_CAP_CSO) ? 1:0;
break;
#endif /* defined(CONFIG_CSO_SUPPORT) || defined(CONFIG_RX_CSO_SUPPORT) */
}
#ifdef RT_CFG80211_SUPPORT
if ((CMD_RTPRIV_IOCTL_80211_START <= cmd) &&
(cmd <= CMD_RTPRIV_IOCTL_80211_END))
CFG80211DRV_IoctlHandle(pAd, wrq, cmd, subcmd, pData, Data);
#endif /* RT_CFG80211_SUPPORT */
if (cmd >= CMD_RTPRIV_IOCTL_80211_COM_LATEST_ONE)
return NDIS_STATUS_FAILURE;
return Status;
}
