VOID asic_write_bcn_buf(RTMP_ADAPTER *pAd, UCHAR *tmac_info, INT info_len, UCHAR *bcn_buf, INT buf_len, UINT32 hw_addr)
{
INT i;
UCHAR *ptr = tmac_info;
UINT32 longValue, reg_base = hw_addr;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, tmac_info, TYPE_TXWI);
#endif
for (i = 0; i < info_len; i += 4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = bcn_buf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = hw_addr + info_len;
for (i= 0; i< buf_len; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
}
VOID RtmpUSBNullFrameKickOut(
IN RTMP_ADAPTER *pAd,
IN UCHAR QueIdx,
IN UCHAR *pNullFrame,
IN UINT32 frameLen)
{
if (pAd->NullContext.InUse == FALSE)
{
PTX_CONTEXT pNullContext;
TXINFO_STRUC *pTxInfo;
TXWI_STRUC *pTxWI;
UCHAR *pWirelessPkt;
UINT8 TXWISize = pAd->chipCap.TXWISize;
pNullContext = &(pAd->NullContext);
/* Set the in use bit*/
pNullContext->InUse = TRUE;
pWirelessPkt = (PUCHAR)&pNullContext->TransferBuffer->field.WirelessPacket[0];
RTMPZeroMemory(&pWirelessPkt[0], 100);
pTxInfo = (TXINFO_STRUC *)&pWirelessPkt[0];
rlt_usb_write_txinfo(pAd, pTxInfo, (USHORT)(frameLen + TXWISize + TSO_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
pTxInfo->TxInfoQSEL = FIFO_EDCA;
pTxWI = (TXWI_STRUC *)&pWirelessPkt[TXINFO_SIZE];
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, frameLen,
0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
#endif /* RT_BIG_ENDIAN */
RTMPMoveMemory(&pWirelessPkt[TXWISize + TXINFO_SIZE + TSO_SIZE], pNullFrame, frameLen);
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)&pWirelessPkt[TXINFO_SIZE + TXWISize + TSO_SIZE], DIR_WRITE, FALSE);
#endif /* RT_BIG_ENDIAN */
pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWISize + TSO_SIZE + frameLen + 4;
pAd->NullContext.BulkOutSize = ( pAd->NullContext.BulkOutSize + 3) & (~3);
/* Fill out frame length information for global Bulk out arbitor*/
/*pNullContext->BulkOutSize = TransferBufferLength;*/
DBGPRINT(RT_DEBUG_TRACE, ("%s - Send NULL Frame @%d Mbps...\n", __FUNCTION__, RateIdToMbps[pAd->CommonCfg.TxRate]));
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
pAd->Sequence = (pAd->Sequence+1) & MAXSEQ;
/* Kick bulk out */
RTUSBKickBulkOut(pAd);
}
}
VOID RtmpUSBNullFrameKickOut(
IN RTMP_ADAPTER *pAd,
IN UCHAR QueIdx,
IN UCHAR *pNullFrame,
IN UINT32 frameLen)
{
if (pAd->NullContext.InUse == FALSE)
{
PTX_CONTEXT pNullContext;
PTXINFO_STRUC pTxInfo;
PTXWI_STRUC pTxWI;
PUCHAR pWirelessPkt;
pNullContext = &(pAd->NullContext);
// Set the in use bit
pNullContext->InUse = TRUE;
pWirelessPkt = (PUCHAR)&pNullContext->TransferBuffer->field.WirelessPacket[0];
RTMPZeroMemory(&pWirelessPkt[0], 100);
pTxInfo = (PTXINFO_STRUC)&pWirelessPkt[0];
RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
pTxInfo->QSEL = FIFO_EDCA;
pTxWI = (PTXWI_STRUC)&pWirelessPkt[TXINFO_SIZE];
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
#endif // RT_BIG_ENDIAN //
RTMPMoveMemory(&pWirelessPkt[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)&pWirelessPkt[TXINFO_SIZE + TXWI_SIZE], DIR_WRITE, FALSE);
#endif // RT_BIG_ENDIAN //
pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
// Fill out frame length information for global Bulk out arbitor
//pNullContext->BulkOutSize = TransferBufferLength;
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - send NULL Frame @%d Mbps...\n", RateIdToMbps[pAd->CommonCfg.TxRate]));
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
// Kick bulk out
RTUSBKickBulkOut(pAd);
}
}
VOID RtmpPCI_FinalWriteTxResource(
IN PRTMP_ADAPTER pAd,
IN TX_BLK *pTxBlk,
IN USHORT totalMPDUSize,
IN USHORT FirstTxIdx)
{
PTXWI_STRUC pTxWI;
PRTMP_TX_RING pTxRing;
/* get Tx Ring Resource*/
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
pTxWI = (PTXWI_STRUC) pTxRing->Cell[FirstTxIdx].DmaBuf.AllocVa;
pTxWI->MPDUtotalByteCount = totalMPDUSize;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
#endif /* RT_BIG_ENDIAN */
}
VOID asic_write_bcn_buf(RTMP_ADAPTER *pAd, UCHAR *tmac_info, INT info_len, UCHAR *bcn_buf, INT buf_len, UINT32 hw_addr)
{
UCHAR *ptr;
#ifdef RT_BIG_ENDIAN
#if defined(RTMP_MAC) || defined(RLT_MAC)
if (pAd->chipCap.hif_type == HIF_RTMP || pAd->chipCap.hif_type == HIF_RLT)
{
RTMPWIEndianChange(pAd, tmac_info, TYPE_TXWI);
}
#endif
#endif
/* update BEACON frame content. start right after the TXWI field. */
ptr = bcn_buf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
// TODO: shiang-MT7603, Send to ASIC!
}
USHORT RtmpPCI_WriteMultiTxResource(
IN PRTMP_ADAPTER pAd,
IN TX_BLK *pTxBlk,
IN UCHAR frameNum,
OUT USHORT *FreeNumber)
{
BOOLEAN bIsLast;
UCHAR *pDMAHeaderBufVA;
USHORT TxIdx, RetTxIdx;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
UINT32 BufBasePaLow;
PRTMP_TX_RING pTxRing;
USHORT hwHdrLen;
UINT32 firstDMALen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
bIsLast = ((frameNum == (pTxBlk->TotalFrameNum - 1)) ? 1 : 0);
/* get Tx Ring Resource*/
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
if (frameNum == 0)
{
/* copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer*/
if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
/*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;*/
hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD + pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
else if (pTxBlk->TxFrameType == TX_RALINK_FRAME)
/*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD;*/
hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_ARALINK_HEADER_FIELD + pTxBlk->HdrPadLen + LENGTH_ARALINK_HEADER_FIELD;
else
/*hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);*/
hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
firstDMALen = TXINFO_SIZE + TXWISize + hwHdrLen;
}
else
{
firstDMALen = pTxBlk->MpduHeaderLen;
}
NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
/* build Tx Descriptor*/
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
#endif
NdisZeroMemory(pTxD, TXD_SIZE);
pTxD->SDPtr0 = BufBasePaLow;
pTxD->SDLen0 = firstDMALen; /* include padding*/
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, RTMP_PCI_DMA_TODEVICE);;
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = !(pTxD->SDLen1);
pTxD->LastSec1 = (bIsLast && pTxD->SDLen1) ? 1 : 0;
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
#ifdef RT_BIG_ENDIAN
if (frameNum == 0)
RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA+ TXINFO_SIZE + TXWISize), DIR_WRITE, FALSE);
if (frameNum != 0)
RTMPWIEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI);
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif /* RT_BIG_ENDIAN */
RetTxIdx = TxIdx;
/* flush dcache if no consistent memory is supported */
RTMP_DCACHE_FLUSH(pTxRing->Cell[TxIdx].DmaBuf.AllocPa, pTxD->SDLen0);
RTMP_DCACHE_FLUSH(pTxBlk->pSrcBufData, pTxBlk->SrcBufLen);
RTMP_DCACHE_FLUSH(pTxRing->Cell[TxIdx].AllocPa, RXD_SIZE);
/* Update Tx index*/
INC_RING_INDEX(TxIdx, TX_RING_SIZE);
pTxRing->TxCpuIdx = TxIdx;
*FreeNumber -= 1;
return RetTxIdx;
}
NDIS_STATUS MlmeHardTransmitTxRing(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
IN PNDIS_PACKET pPacket)
{
PACKET_INFO PacketInfo;
PUCHAR pSrcBufVA;
UINT SrcBufLen;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
PHEADER_802_11 pHeader_802_11;
BOOLEAN bAckRequired, bInsertTimestamp;
ULONG SrcBufPA;
/*UCHAR TxBufIdx;*/
UCHAR MlmeRate;
ULONG SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
PTXWI_STRUC pFirstTxWI;
/*ULONG i;*/
/*HTTRANSMIT_SETTING MlmeTransmit; Rate for this MGMT frame.*/
ULONG FreeNum;
MAC_TABLE_ENTRY *pMacEntry = NULL;
UINT8 TXWISize = pAd->chipCap.TXWISize;
#ifdef CONFIG_AP_SUPPORT
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
if (pSrcBufVA == NULL)
{
/* The buffer shouldn't be NULL*/
return NDIS_STATUS_FAILURE;
}
/* Make sure MGMT ring resource won't be used by other threads*/
/*NdisAcquireSpinLock(&pAd->TxRingLock);*/
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNum == 0)
{
/*NdisReleaseSpinLock(&pAd->TxRingLock);*/
return NDIS_STATUS_FAILURE;
}
SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
#ifdef RT_BIG_ENDIAN
pDestTxD = (PTXD_STRUC)pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
#else
pTxD = (PTXD_STRUC) pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
#endif
if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket)
{
DBGPRINT(RT_DEBUG_OFF, ("MlmeHardTransmit Error\n"));
/*NdisReleaseSpinLock(&pAd->TxRingLock);*/
return NDIS_STATUS_FAILURE;
}
pFirstTxWI =(PTXWI_STRUC)(pSrcBufVA + TXINFO_SIZE);
pHeader_802_11 = (PHEADER_802_11)(pSrcBufVA + TXINFO_SIZE + TXWISize);
if (pHeader_802_11->Addr1[0] & 0x01)
{
MlmeRate = pAd->CommonCfg.BasicMlmeRate;
}
else
{
MlmeRate = pAd->CommonCfg.MlmeRate;
}
if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL))
{
pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
}
/* Verify Mlme rate for a / g bands.*/
if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) /* 11A band*/
MlmeRate = RATE_6;
/*
Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
Snice it's been set to 0 while on MgtMacHeaderInit
By the way this will cause frame to be send on PWR_SAVE failed.
*/
/* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame*/
bInsertTimestamp = FALSE;
if (pHeader_802_11->FC.Type == BTYPE_CNTL) /* must be PS-POLL*/
{
bAckRequired = FALSE;
}
else /* BTYPE_MGMT or BTYPE_DATA(must be NULL frame)*/
{
if (pHeader_802_11->Addr1[0] & 0x01) /* MULTICAST, BROADCAST*/
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
}
else
{
bAckRequired = TRUE;
pHeader_802_11->Duration = RTMPCalcDuration(pAd, MlmeRate, 14);
if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
{
bInsertTimestamp = TRUE;
#ifdef CONFIG_AP_SUPPORT
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Find which MBSSID to be send this probeRsp */
UINT32 apidx;
for (apidx=0; apidx<pAd->ApCfg.BssidNum; apidx++)
{
if (RTMPEqualMemory(pHeader_802_11->Addr2, pAd->ApCfg.MBSSID[apidx].Bssid, MAC_ADDR_LEN))
break;
}
if (!(apidx >= pAd->ApCfg.BssidNum) &&
(pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) &&
(pAd->CommonCfg.MlmeTransmit.field.MODE == MODE_CCK) &&
(pAd->CommonCfg.MlmeTransmit.field.MCS == RATE_1))
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */
}
}
}
pHeader_802_11->Sequence = pAd->Sequence++;
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
/* Before radar detection done, mgmt frame can not be sent but probe req*/
/* Because we need to use probe req to trigger driver to send probe req in passive scan*/
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode != RD_NORMAL_MODE))
{
DBGPRINT(RT_DEBUG_ERROR,("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
/*NdisReleaseSpinLock(&pAd->TxRingLock);*/
return (NDIS_STATUS_FAILURE);
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
#endif
/*
Fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
should always has only one ohysical buffer, and the whole frame size equals
to the first scatter buffer size
*/
/*
Initialize TX Descriptor
For inter-frame gap, the number is for this frame and next frame
For MLME rate, we will fix as 2Mb to match other vendor's implement
*/
/* pAd->CommonCfg.MlmeTransmit.field.MODE = 1;*/
/* management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.*/
/* Only beacon use Nseq=TRUE. So here we use Nseq=FALSE.*/
if (pMacEntry == NULL)
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, RESERVED_WCID, (SrcBufLen - TXINFO_SIZE - TXWISize), PID_MGMT, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
if (IS_RT6352(pAd))
pFirstTxWI->TxPwrAdj = TxPwrAdj;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
}
else
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, pMacEntry->Aid, (SrcBufLen - TXINFO_SIZE - TXWISize),
pMacEntry->MaxHTPhyMode.field.MCS, 0,
(UCHAR)pMacEntry->MaxHTPhyMode.field.MCS,
IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
}
pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
/* pFirstTxWI->MPDUtotalByteCount = SrcBufLen - TXWI_SIZE;*/
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pFirstTxWI, TYPE_TXWI);
#endif
SrcBufPA = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, RTMP_PCI_DMA_TODEVICE);
pTxD->LastSec0 = 1;
pTxD->LastSec1 = 0;
pTxD->SDLen1 = 0;
pTxD->SDPtr0 = SrcBufPA;
pTxD->SDLen0 = SrcBufLen;
RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_EDCA);
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif
pAd->RalinkCounters.KickTxCount++;
pAd->RalinkCounters.OneSecTxDoneCount++;
/* flush dcache if no consistent memory is supported */
RTMP_DCACHE_FLUSH(SrcBufPA, SrcBufLen);
RTMP_DCACHE_FLUSH(pAd->TxRing[QueIdx].Cell[SwIdx].AllocPa, RXD_SIZE);
/* Increase TX_CTX_IDX, but write to register later.*/
INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx*0x10, pAd->TxRing[QueIdx].TxCpuIdx);
/* Make sure to release MGMT ring resource*/
/* NdisReleaseSpinLock(&pAd->TxRingLock);*/
return NDIS_STATUS_SUCCESS;
}
INT ATESetUpFrame(
IN PRTMP_ADAPTER pAd,
IN UINT32 TxIdx)
{
PATE_INFO pATEInfo = &(pAd->ate);
UINT pos = 0;
PTX_CONTEXT pNullContext;
PUCHAR pDest;
HTTRANSMIT_SETTING TxHTPhyMode;
TXWI_STRUC *pTxWI;
TXINFO_STRUC *pTxInfo;
UINT32 TransferBufferLength, OrgBufferLength = 0;
UCHAR padLen = 0;
UINT8 TXWISize = pAd->chipCap.TXWISize;
#ifdef RALINK_QA
PHEADER_802_11 pHeader80211 = NULL;
#endif /* RALINK_QA */
if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
return -1;
}
/* We always use QID_AC_BE and FIFO_EDCA in ATE mode. */
pNullContext = &(pAd->NullContext);
ASSERT(pNullContext != NULL);
if (pNullContext->InUse == FALSE)
{
/* set the in use bit */
pNullContext->InUse = TRUE;
NdisZeroMemory(&(pAd->NullFrame), sizeof(HEADER_802_11));
/* fill 802.11 header */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
pHeader80211 = NdisMoveMemory(&(pAd->NullFrame),
pATEInfo->Header, pATEInfo->HLen);
}
else
#endif /* RALINK_QA */
{
NdisMoveMemory(&(pAd->NullFrame), TemplateFrame,
sizeof(HEADER_802_11));
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)&(pAd->NullFrame), DIR_READ, FALSE);
#endif /* RT_BIG_ENDIAN */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
/* modify sequence number... */
if (pATEInfo->TxDoneCount == 0)
{
pATEInfo->seq = pHeader80211->Sequence;
}
else
{
pHeader80211->Sequence = ++pATEInfo->seq;
}
/* We already got all the address fields from QA GUI. */
}
else
#endif /* RALINK_QA */
{
COPY_MAC_ADDR(pAd->NullFrame.Addr1, pATEInfo->Addr1);
COPY_MAC_ADDR(pAd->NullFrame.Addr2, pATEInfo->Addr2);
COPY_MAC_ADDR(pAd->NullFrame.Addr3, pATEInfo->Addr3);
}
RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], TX_BUFFER_NORMSIZE);
pTxInfo = (TXINFO_STRUC *)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
/* Avoid to exceed the range of WirelessPacket[]. */
ASSERT(pATEInfo->TxInfo.TxInfoPktLen <= (MAX_FRAME_SIZE - 34/* == 2312 */));
NdisMoveMemory(pTxInfo, &(pATEInfo->TxInfo), sizeof(pATEInfo->TxInfo));
}
else
#endif /* RALINK_QA */
{
/* Avoid to exceed the range of WirelessPacket[]. */
ASSERT(pATEInfo->TxLength <= (MAX_FRAME_SIZE - 34/* == 2312 */));
/* pTxInfo->TxInfoPktLen will be updated to include padding later */
ATEWriteTxInfo(pAd, pTxInfo, (USHORT)(TXWISize + pATEInfo->TxLength)
, TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
pTxInfo->TxInfoQSEL = FIFO_EDCA;
}
pTxWI = (TXWI_STRUC *)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
/* fill TxWI */
if (pATEInfo->bQATxStart == TRUE)
{
TxHTPhyMode.field.BW = pATEInfo->TxWI.TxWIBW;
TxHTPhyMode.field.ShortGI = pATEInfo->TxWI.TxWIShortGI;
TxHTPhyMode.field.STBC = pATEInfo->TxWI.TxWISTBC;
TxHTPhyMode.field.MCS = pATEInfo->TxWI.TxWIMCS;
TxHTPhyMode.field.MODE = pATEInfo->TxWI.TxWIPHYMODE;
ATEWriteTxWI(pAd, pTxWI, pATEInfo->TxWI.TxWIFRAG, pATEInfo->TxWI.TxWITS,
pATEInfo->TxWI.TxWIAMPDU, pATEInfo->TxWI.TxWIACK, pATEInfo->TxWI.TxWINSEQ,
pATEInfo->TxWI.TxWIBAWinSize, BSSID_WCID,
pATEInfo->TxWI.TxWIMPDUByteCnt/* include 802.11 header */,
pATEInfo->TxWI.TxWIPacketId,
0, pATEInfo->TxWI.TxWITXOP/*IFS_HTTXOP*/, pATEInfo->TxWI.TxWICFACK
/*FALSE*/, TxHTPhyMode);
}
else
{
TxHTPhyMode.field.BW = pATEInfo->TxWI.TxWIBW;
TxHTPhyMode.field.ShortGI = pATEInfo->TxWI.TxWIShortGI;
TxHTPhyMode.field.STBC = 0;
TxHTPhyMode.field.MCS = pATEInfo->TxWI.TxWIMCS;
TxHTPhyMode.field.MODE = pATEInfo->TxWI.TxWIPHYMODE;
ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE
/* No ack required. */, FALSE, 0, BSSID_WCID, pATEInfo->TxLength,
0, 0, IFS_HTTXOP, FALSE, TxHTPhyMode);
}
hex_dump("ATE", pAd->NullContext.TransferBuffer->field.WirelessPacket, 24);
dump_txinfo(pAd, pTxInfo);
dumpTxWI(pAd, pTxWI);
RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE + TXWISize],
&pAd->NullFrame, sizeof(HEADER_802_11));
pDest = &(pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE + TXWISize + sizeof(HEADER_802_11)]);
/* prepare frame payload */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
/* copy the pattern one by one to the frame payload */
if ((pATEInfo->PLen != 0) && (pATEInfo->DLen != 0))
{
for (pos = 0; pos < pATEInfo->DLen; pos += pATEInfo->PLen)
{
RTMPMoveMemory(pDest, pATEInfo->Pattern, pATEInfo->PLen);
pDest += pATEInfo->PLen;
}
}
TransferBufferLength = TXINFO_SIZE + TXWISize + pATEInfo->TxWI.TxWIMPDUByteCnt;
}
else
#endif /* RALINK_QA */
{
for (pos = 0; pos < (pATEInfo->TxLength - sizeof(HEADER_802_11)); pos++)
{
/* default payload is 0xA5 */
*pDest = pATEInfo->Payload;
pDest += 1;
}
TransferBufferLength = TXINFO_SIZE + TXWISize + pATEInfo->TxLength;
}
OrgBufferLength = TransferBufferLength;
TransferBufferLength = (TransferBufferLength + 3) & (~3);
/* Always add 4 extra bytes at every packet. */
padLen = TransferBufferLength - OrgBufferLength + 4;/* 4 == last packet padding */
/*
RTMP_PKT_TAIL_PADDING == 11.
[11 == 3(max 4 byte padding) + 4(last packet padding) + 4(MaxBulkOutsize align padding)]
*/
ASSERT((padLen <= (RTMP_PKT_TAIL_PADDING - 4/* 4 == MaxBulkOutsize alignment padding */)));
/* Now memzero all extra padding bytes. */
NdisZeroMemory(pDest, padLen);
pDest += padLen;
/* Update pTxInfo->TxInfoPktLen to include padding. */
pTxInfo->TxInfoPktLen = TransferBufferLength - TXINFO_SIZE;
TransferBufferLength += 4;
/* If TransferBufferLength is multiple of 64, add extra 4 bytes again. */
if ((TransferBufferLength % pAd->BulkOutMaxPacketSize) == 0)
{
NdisZeroMemory(pDest, 4);
TransferBufferLength += 4;
}
/* Fill out frame length information for global Bulk out arbitor. */
pAd->NullContext.BulkOutSize = TransferBufferLength;
}
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
RTMPFrameEndianChange(pAd, (((PUCHAR)pTxInfo) + TXWISize + TXINFO_SIZE), DIR_WRITE, FALSE);
RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
#endif /* RT_BIG_ENDIAN */
hex_dump("ATE TX", &pAd->NullContext.TransferBuffer->field.WirelessPacket[0], TXWISize + TXINFO_SIZE);
return 0;
}
INT ATESetUpNDPAFrame(
IN PRTMP_ADAPTER pAd,
IN UINT32 TxIdx)
{
PATE_INFO pATEInfo = &(pAd->ate);
UINT pos = 0;
TXINFO_STRUC *pTxInfo;
TXD_STRUC *pTxD;
#ifdef RT_BIG_ENDIAN
TXD_STRUC *pDestTxD;
UCHAR tx_hw_info[TXD_SIZE];
#endif /* RT_BIG_ENDIAN */
PNDIS_PACKET pPacket=NULL;
PUCHAR pDest=NULL;
PVOID AllocVa=NULL;
NDIS_PHYSICAL_ADDRESS AllocPa;
HTTRANSMIT_SETTING TxHTPhyMode;
UCHAR *buf;
VHT_NDPA_FRAME *vht_ndpa;
SNDING_STA_INFO *sta_info;
RTMP_TX_RING *pTxRing = &pAd->TxRing[QID_AC_BE];
TXWI_STRUC *pTxWI = (TXWI_STRUC *)pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
PUCHAR pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
UINT8 TXWISize = pAd->chipCap.TXWISize;
#ifdef RALINK_QA
PHEADER_802_11 pHeader80211;
#endif /* RALINK_QA */
UCHAR bw, sgi, stbc, mcs, phy_mode, frag, cfack, ts, ampdu, ack, nseq, bawinsize, pkt_id, txop;
USHORT byte_cnt;
bw = sgi = stbc = mcs = phy_mode = frag = cfack = ts =0;
ampdu = ack = nseq = bawinsize = pkt_id = txop = 0;
byte_cnt = 0;
#ifdef RLT_MAC
if (pAd->chipCap.hif_type == HIF_RLT) {
bw = pATEInfo->TxWI.TXWI_N.BW;
sgi = pATEInfo->TxWI.TXWI_N.ShortGI;
stbc = pATEInfo->TxWI.TXWI_N.STBC;
mcs = pATEInfo->TxWI.TXWI_N.MCS;
phy_mode = pATEInfo->TxWI.TXWI_N.PHYMODE;
frag = pATEInfo->TxWI.TXWI_N.FRAG;
cfack = pATEInfo->TxWI.TXWI_N.CFACK,
ts = pATEInfo->TxWI.TXWI_N.TS;
ampdu = pATEInfo->TxWI.TXWI_N.AMPDU;
ack = pATEInfo->TxWI.TXWI_N.ACK;
nseq = pATEInfo->TxWI.TXWI_N.NSEQ;
bawinsize =pATEInfo->TxWI.TXWI_N.BAWinSize;
byte_cnt = pATEInfo->TxWI.TXWI_N.MPDUtotalByteCnt;
pkt_id = pATEInfo->TxWI.TXWI_N.TxPktId;
txop = pATEInfo->TxWI.TXWI_N.txop;
cfack = pATEInfo->TxWI.TXWI_N.CFACK;
}
#endif /* RLT_MAC */
#ifdef RTMP_MAC
if (pAd->chipCap.hif_type == HIF_RTMP) {
bw = pATEInfo->TxWI.TXWI_O.BW;
sgi = pATEInfo->TxWI.TXWI_O.ShortGI;
stbc = pATEInfo->TxWI.TXWI_O.STBC;
mcs = pATEInfo->TxWI.TXWI_O.MCS;
phy_mode = pATEInfo->TxWI.TXWI_O.PHYMODE;
frag = pATEInfo->TxWI.TXWI_O.FRAG;
cfack = pATEInfo->TxWI.TXWI_O.CFACK,
ts = pATEInfo->TxWI.TXWI_O.TS;
ampdu = pATEInfo->TxWI.TXWI_O.AMPDU;
ack = pATEInfo->TxWI.TXWI_O.ACK;
nseq = pATEInfo->TxWI.TXWI_O.NSEQ;
bawinsize =pATEInfo->TxWI.TXWI_O.BAWinSize;
byte_cnt = pATEInfo->TxWI.TXWI_O.MPDUtotalByteCnt;
pkt_id = pATEInfo->TxWI.TXWI_O.PacketId;
txop = pATEInfo->TxWI.TXWI_O.txop;
cfack = pATEInfo->TxWI.TXWI_O.CFACK;
}
#endif /* RTMP_MAC */
/* fill TxWI */
TxHTPhyMode.field.BW = bw;
TxHTPhyMode.field.ShortGI = sgi;
TxHTPhyMode.field.STBC = stbc;
TxHTPhyMode.field.MCS = mcs;
TxHTPhyMode.field.MODE = phy_mode;
if (pATEInfo->bQATxStart == TRUE)
{
/* always use QID_AC_BE and FIFO_EDCA */
ATEWriteTxWI(pAd, pTxWI, frag, cfack,
ts, ampdu, ack,
nseq, bawinsize, 0,
byte_cnt, pkt_id, 0, 0,
txop, cfack,
&TxHTPhyMode);
#ifdef TXBF_SUPPORT
#ifdef RTMP_MAC
if (IS_RT2883(pAd) || IS_RT3883(pAd) || IS_RT3593(pAd))
{
/* Must copy rsv bits to actual TxWI */
//pTxWI->TXWI_O.rsv = pATEInfo->TxWI.TXWI_O.rsv;
pTxWI->TXWI_O.iTxBF = pATEInfo->TxWI.TXWI_O.iTxBF;
pTxWI->TXWI_O.Sounding = pATEInfo->TxWI.TXWI_O.Sounding;
pTxWI->TXWI_O.eTxBF = pATEInfo->TxWI.TXWI_O.eTxBF;
pTxWI->TXWI_O.Autofallback = pATEInfo->TxWI.TXWI_O.Autofallback;
pTxWI->TXWI_O.NDPSndBW = pATEInfo->TxWI.TXWI_O.NDPSndBW;
pTxWI->TXWI_O.NDPSndRate = pATEInfo->TxWI.TXWI_O.NDPSndRate;
}
#endif
#ifdef RLT_MAC
if (IS_MT76x2(pAd))
{
/* Must copy rsv bits to actual TxWI */
pTxWI->TXWI_N.Rsv4 = pATEInfo->TxWI.TXWI_N.Rsv4;
pTxWI->TXWI_N.iTxBF = pATEInfo->TxWI.TXWI_N.iTxBF;
pTxWI->TXWI_N.Sounding = pATEInfo->TxWI.TXWI_N.Sounding;
pTxWI->TXWI_N.eTxBF = pATEInfo->TxWI.TXWI_N.eTxBF;
//pTxWI->TXWI_N.Autofallback = pATEInfo->TxWI.TXWI_N.Autofallback;
pTxWI->TXWI_N.NDPSndBW = pATEInfo->TxWI.TXWI_N.NDPSndBW;
pTxWI->TXWI_N.NDPSndRate = pATEInfo->TxWI.TXWI_N.NDPSndRate;
pTxWI->TXWI_N.TXBF_PT_SCA = pATEInfo->TxWI.TXWI_N.TXBF_PT_SCA;
}
#endif
#endif /* TXBF_SUPPORT */
}
else
{
ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE,
4, 0, pATEInfo->TxLength, 0, 0, 0, IFS_HTTXOP, FALSE, &TxHTPhyMode);
#ifdef TXBF_SUPPORT
if (pATEInfo->bTxBF == 1)
{
#ifdef RTMP_MAC
if (IS_RT2883(pAd) || IS_RT3883(pAd) || IS_RT3593(pAd))
{
//pTxWI->TXWI_O.rsv = 0;
pTxWI->TXWI_O.iTxBF = pATEInfo->TxWI.TXWI_O.iTxBF;
pTxWI->TXWI_O.Sounding = (pATEInfo->txSoundingMode == 1 ? 1 : 0);
pTxWI->TXWI_O.eTxBF = pATEInfo->TxWI.TXWI_O.eTxBF;
pTxWI->TXWI_O.Autofallback = pATEInfo->TxWI.TXWI_O.Autofallback;
pTxWI->TXWI_O.NDPSndBW = pATEInfo->TxWI.TXWI_O.BW;
if (pATEInfo->txSoundingMode == 3)
pTxWI->TXWI_O.NDPSndRate = 2;
else if (pATEInfo->txSoundingMode == 2)
pTxWI->TXWI_O.NDPSndRate = 1;
else
pTxWI->TXWI_O.NDPSndRate = 0;
}
#endif
#ifdef RLT_MAC
if (IS_MT76x2(pAd))
{
pTxWI->TXWI_N.Rsv4 = 0;
pTxWI->TXWI_N.iTxBF = pATEInfo->TxWI.TXWI_N.iTxBF;
pTxWI->TXWI_N.Sounding = (pATEInfo->txSoundingMode == 1 ? 1 : 0);
pTxWI->TXWI_N.eTxBF = pATEInfo->TxWI.TXWI_N.eTxBF;
//pTxWI->TXWI_N.Autofallback = pATEInfo->TxWI.TXWI_N.Autofallback;
pTxWI->TXWI_N.NDPSndBW = pATEInfo->TxWI.TXWI_N.BW;
if (pATEInfo->txSoundingMode == 3)
pTxWI->TXWI_N.NDPSndRate = 2;
else if (pATEInfo->txSoundingMode == 2)
pTxWI->TXWI_N.NDPSndRate = 1;
else
pTxWI->TXWI_N.NDPSndRate = 0;
pTxWI->TXWI_N.TXBF_PT_SCA = pATEInfo->TxWI.TXWI_N.TXBF_PT_SCA;
}
#endif
}
#endif /* TXBF_SUPPORT */
}
/* fill 802.11 header */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
NdisMoveMemory(pDMAHeaderBufVA + TXWISize, pATEInfo->Header, pATEInfo->HLen);
}
else
#endif /* RALINK_QA */
{
buf = (pDMAHeaderBufVA + TXWISize);
vht_ndpa = (VHT_NDPA_FRAME *)buf;
pATEInfo->HLen = sizeof(VHT_NDPA_FRAME);
vht_ndpa->fc.Type = FC_TYPE_CNTL;
vht_ndpa->fc.SubType = SUBTYPE_VHT_NDPA;
COPY_MAC_ADDR(vht_ndpa->ra, pATEInfo->Addr1);
COPY_MAC_ADDR(vht_ndpa->ta, pATEInfo->Addr3);
hex_dump("NDPA Frame",buf,pATEInfo->HLen);
/* Currnetly we only support 1 STA for a VHT DNPA */
sta_info = vht_ndpa->sta_info;
sta_info->aid12 = 1;
sta_info->fb_type = SNDING_FB_SU;
sta_info->nc_idx = 0;
vht_ndpa->token.token_num = 0;
vht_ndpa->duration = 100;
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA) + TXWISize), DIR_READ, FALSE);
#endif /* RT_BIG_ENDIAN */
/* alloc buffer for payload */
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
pPacket = RTMP_AllocateRxPacketBuffer(pAd, ((POS_COOKIE)(pAd->OS_Cookie))->pci_dev,
pATEInfo->DLen + 0x100, FALSE, &AllocVa, &AllocPa);
}
else
#endif /* RALINK_QA */
{
pPacket = RTMP_AllocateRxPacketBuffer(pAd, ((POS_COOKIE)(pAd->OS_Cookie))->pci_dev,
pATEInfo->TxLength, FALSE, &AllocVa, &AllocPa);
}
if (pPacket == NULL)
{
pATEInfo->TxCount = 0;
DBGPRINT_ERR(("%s : fail to alloc packet space.\n", __FUNCTION__));
return -1;
}
pTxRing->Cell[TxIdx].pNextNdisPacket = pPacket;
pDest = (PUCHAR) AllocVa;
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
GET_OS_PKT_LEN(pPacket) = pATEInfo->DLen;
#ifndef LINUX
GET_OS_PKT_TOTAL_LEN(pPacket) = pATEInfo->DLen;
#endif /* LIMUX */
}
else
#endif /* RALINK_QA */
{
GET_OS_PKT_LEN(pPacket) = pATEInfo->TxLength - pATEInfo->HLen;
#ifndef LINUX
GET_OS_PKT_TOTAL_LEN(pPacket) = pATEInfo->TxLength - pATEInfo->HLen;
#endif /* LINUX */
}
/* prepare frame payload */
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
/* copy pattern to payload */
if ((pATEInfo->PLen != 0))
{
for (pos = 0; pos < pATEInfo->DLen; pos += pATEInfo->PLen)
{
memcpy(GET_OS_PKT_DATAPTR(pPacket) + pos, pATEInfo->Pattern, pATEInfo->PLen);
}
}
}
else
#endif /* RALINK_QA */
{
for (pos = 0; pos < GET_OS_PKT_LEN(pPacket); pos++)
{
pDest[pos] = 0x00;
}
}
/* build Tx descriptor */
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
pTxInfo = (TXINFO_STRUC *)(pTxRing->Cell[TxIdx].AllocVa + sizeof(TXD_STRUC));
#else
pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
NdisMoveMemory(&tx_hw_info[0], (UCHAR *)pDestTxD, TXD_SIZE);
pTxD = (TXD_STRUC *)&tx_hw_info[0];
pTxInfo = (TXINFO_STRUC *)(&tx_hw_info[0] + sizeof(TXD_STRUC));
#endif /* !RT_BIG_ENDIAN */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
/* prepare TxD */
NdisZeroMemory(pTxD, TXD_SIZE);
/* build Tx descriptor */
pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
pTxD->SDLen0 = TXWISize + pATEInfo->HLen;
pTxD->SDPtr1 = AllocPa;
pTxD->SDLen1 = GET_OS_PKT_LEN(pPacket);
pTxD->LastSec0 = (pTxD->SDLen1 == 0) ? 1 : 0;
pTxD->LastSec1 = 1;
ral_write_txd(pAd, pTxD, pTxInfo, FALSE, FIFO_EDCA);
pDest = (PUCHAR)pTxWI;
pDest += TXWISize;
pHeader80211 = (PHEADER_802_11)pDest;
/* modify sequence number... */
if (pATEInfo->TxDoneCount == 0)
pATEInfo->seq = pHeader80211->Sequence;
else
pHeader80211->Sequence = ++pATEInfo->seq;
}
else
#endif /* RALINK_QA */
{
TX_BLK txblk;
txblk.SrcBufLen = GET_OS_PKT_LEN(pPacket);
txblk.pSrcBufData = AllocVa;
NdisZeroMemory(pTxD, TXD_SIZE);
/* build Tx descriptor */
pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow (pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
pTxD->SDLen0 = TXWISize + pATEInfo->HLen /* LENGTH_802_11 */;
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, &txblk, 0, 1, RTMP_PCI_DMA_TODEVICE);
pTxD->SDLen1 = GET_OS_PKT_LEN(pPacket);
pTxD->LastSec0 = (pTxD->SDLen1 == 0) ? 1 : 0;
pTxD->LastSec1 = 1;
ral_write_txd(pAd, pTxD, pTxInfo, FALSE, FIFO_EDCA);
}
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA) + TXWISize), DIR_WRITE, FALSE);
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif /* RT_BIG_ENDIAN */
return 0;
}
/*
========================================================================
Routine Description:
Get a received packet.
Arguments:
pAd device control block
pSaveRxD receive descriptor information
*pbReschedule need reschedule flag
*pRxPending pending received packet flag
Return Value:
the recieved packet
Note:
========================================================================
*/
PNDIS_PACKET GetPacketFromRxRing(
IN RTMP_ADAPTER *pAd,
OUT RX_BLK *pRxBlk,
OUT BOOLEAN *pbReschedule,
INOUT UINT32 *pRxPending,
OUT BOOLEAN *bCmdRspPacket)
{
RX_CONTEXT *pRxContext;
PNDIS_PACKET pNetPkt;
UCHAR *pData, *RXDMA;
ULONG ThisFrameLen, RxBufferLength, valid_len;
RXWI_STRUC *pRxWI;
UINT8 RXWISize = pAd->chipCap.RXWISize;
RXINFO_STRUC *pRxInfo;
#ifdef RLT_MAC
RXFCE_INFO *pRxFceInfo;
#endif /* RLT_MAC */
*bCmdRspPacket = FALSE;
pRxContext = &pAd->RxContext[pAd->NextRxBulkInReadIndex];
if ((pRxContext->Readable == FALSE) || (pRxContext->InUse == TRUE))
return NULL;
RxBufferLength = pRxContext->BulkInOffset - pAd->ReadPosition;
valid_len = RXDMA_FIELD_SIZE * 2;
if (RxBufferLength < valid_len)
{
goto label_null;
}
pData = &pRxContext->TransferBuffer[pAd->ReadPosition];
RXDMA = pData;
/* The RXDMA field is 4 bytes, now just use the first 2 bytes. The Length including the (RXWI + MSDU + Padding) */
ThisFrameLen = *pData + (*(pData+1)<<8);
if (ThisFrameLen == 0)
{
DBGPRINT(RT_DEBUG_TRACE, ("BIRIdx(%d): RXDMALen is zero.[%ld], BulkInBufLen = %ld)\n",
pAd->NextRxBulkInReadIndex, ThisFrameLen, pRxContext->BulkInOffset));
goto label_null;
}
if ((ThisFrameLen & 0x3) != 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("BIRIdx(%d): RXDMALen not multiple of 4.[%ld], BulkInBufLen = %ld)\n",
pAd->NextRxBulkInReadIndex, ThisFrameLen, pRxContext->BulkInOffset));
goto label_null;
}
if ((ThisFrameLen + 8) > RxBufferLength) /* 8 for (RXDMA_FIELD_SIZE + sizeof(RXINFO_STRUC))*/
{
DBGPRINT(RT_DEBUG_ERROR,("BIRIdx(%d):FrameLen(0x%lx) outranges. BulkInLen=0x%lx, remaining RxBufLen=0x%lx, ReadPos=0x%lx\n",
pAd->NextRxBulkInReadIndex, ThisFrameLen, pRxContext->BulkInOffset, RxBufferLength, pAd->ReadPosition));
/* error frame. finish this loop*/
goto label_null;
}
/* skip USB frame length field*/
pData += RXDMA_FIELD_SIZE;
#ifdef RLT_MAC
pRxFceInfo = (RXFCE_INFO *)(pData + ThisFrameLen);
/* Check if command response or data packet */
if ((pRxFceInfo->info_type == CMD_PACKET) && (pAd->chipCap.CmdRspRxRing == RX_RING0))
{
//CmdRspEventCallbackHandle(pAd, RXDMA);
/* Update next packet read position.*/
pAd->ReadPosition += (sizeof(*pRxFceInfo) * 2 + pRxFceInfo->pkt_len);
*bCmdRspPacket = TRUE;
goto label_null;
}
pRxInfo = (RXINFO_STRUC *)pData;
pData += RXINFO_SIZE;
#endif /* RLT_MAC */
#ifdef RTMP_MAC
pRxInfo = *(RXINFO_STRUC *)(pData + ThisFrameLen);
#endif /* RTMP_MAC */
pRxWI = (RXWI_STRUC *)pData;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, pData, TYPE_RXWI);
#endif /* RT_BIG_ENDIAN */
if (pRxWI->RxWIMPDUByteCnt > ThisFrameLen)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s():pRxWIMPDUtotalByteCount(%d) large than RxDMALen(%ld)\n",
__FUNCTION__, pRxWI->RxWIMPDUByteCnt, ThisFrameLen));
goto label_null;
}
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, pData, TYPE_RXWI);
#endif /* RT_BIG_ENDIAN */
/* allocate a rx packet*/
pNetPkt = RTMP_AllocateFragPacketBuffer(pAd, ThisFrameLen);
if (pNetPkt == NULL)
{
DBGPRINT(RT_DEBUG_ERROR,("%s():Cannot Allocate sk buffer for this Bulk-In buffer!\n", __FUNCTION__));
goto label_null;
}
/* copy the rx packet*/
RTMP_USB_PKT_COPY(get_netdev_from_bssid(pAd, BSS0), pNetPkt, ThisFrameLen, pData);
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pRxInfo, TYPE_RXINFO);
#endif /* RT_BIG_ENDIAN */
#ifdef RLT_MAC
NdisMoveMemory((VOID *)&pRxBlk->hw_rx_info[0], (VOID *)pRxFceInfo, sizeof(RXFCE_INFO));
pRxBlk->pRxFceInfo = (RXFCE_INFO *)&pRxBlk->hw_rx_info[0];
#endif /* RLT_MAC */
NdisMoveMemory(&pRxBlk->hw_rx_info[RXINFO_OFFSET], pRxInfo, RXINFO_SIZE);
pRxBlk->pRxInfo = (RXINFO_STRUC *)&pRxBlk->hw_rx_info[RXINFO_OFFSET];
/* update next packet read position.*/
pAd->ReadPosition += (ThisFrameLen + RXDMA_FIELD_SIZE + RXINFO_SIZE); /* 8 for (RXDMA_FIELD_SIZE + sizeof(RXINFO_STRUC))*/
return pNetPkt;
label_null:
return NULL;
}
/*
==========================================================================
Description:
Setup Frame format.
NOTE:
This routine should only be used in ATE mode.
==========================================================================
*/
INT ATESetUpFrame(
IN PRTMP_ADAPTER pAd,
IN UINT32 TxIdx)
{
PATE_INFO pATEInfo = &(pAd->ate);
UINT pos = 0;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
PNDIS_PACKET pPacket=NULL;
PUCHAR pDest=NULL;
PVOID AllocVa=NULL;
NDIS_PHYSICAL_ADDRESS AllocPa;
HTTRANSMIT_SETTING TxHTPhyMode;
PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE];
PTXWI_STRUC pTxWI = (PTXWI_STRUC) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
PUCHAR pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
UINT8 TXWISize = pAd->chipCap.TXWISize;
#ifdef RALINK_QA
PHEADER_802_11 pHeader80211;
#endif /* RALINK_QA */
/* fill TxWI */
TxHTPhyMode.field.BW = pATEInfo->TxWI.BW;
TxHTPhyMode.field.ShortGI = pATEInfo->TxWI.ShortGI;
TxHTPhyMode.field.STBC = pATEInfo->TxWI.STBC;
TxHTPhyMode.field.MCS = pATEInfo->TxWI.MCS;
TxHTPhyMode.field.MODE = pATEInfo->TxWI.PHYMODE;
if (pATEInfo->bQATxStart == TRUE)
{
/* always use QID_AC_BE and FIFO_EDCA */
ATEWriteTxWI(pAd, pTxWI, pATEInfo->TxWI.FRAG, pATEInfo->TxWI.CFACK,
pATEInfo->TxWI.TS, pATEInfo->TxWI.AMPDU, pATEInfo->TxWI.ACK,
pATEInfo->TxWI.NSEQ, pATEInfo->TxWI.BAWinSize, 0,
pATEInfo->TxWI.MPDUtotalByteCount, pATEInfo->TxWI.PacketId, 0, 0,
pATEInfo->TxWI.txop/*IFS_HTTXOP*/, pATEInfo->TxWI.CFACK/*FALSE*/,
&TxHTPhyMode);
}
else
{
ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE,
4, 0, pATEInfo->TxLength, 0, 0, 0, IFS_HTTXOP, FALSE, &TxHTPhyMode);
}
/* fill 802.11 header */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
NdisMoveMemory(pDMAHeaderBufVA + TXWISize, pATEInfo->Header, pATEInfo->HLen);
}
else
#endif /* RALINK_QA */
{
pATEInfo->HLen = LENGTH_802_11;
NdisMoveMemory(pDMAHeaderBufVA + TXWISize, TemplateFrame, pATEInfo->HLen);
NdisMoveMemory(pDMAHeaderBufVA + TXWISize + 4, pATEInfo->Addr1, ETH_LENGTH_OF_ADDRESS);
NdisMoveMemory(pDMAHeaderBufVA + TXWISize + 10, pATEInfo->Addr2, ETH_LENGTH_OF_ADDRESS);
NdisMoveMemory(pDMAHeaderBufVA + TXWISize + 16, pATEInfo->Addr3, ETH_LENGTH_OF_ADDRESS);
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA) + TXWISize), DIR_READ, FALSE);
#endif /* RT_BIG_ENDIAN */
/* alloc buffer for payload */
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
pPacket = RTMP_AllocateRxPacketBuffer(pAd, ((POS_COOKIE)(pAd->OS_Cookie))->pci_dev,
pATEInfo->DLen + 0x100, FALSE, &AllocVa, &AllocPa);
}
else
#endif /* RALINK_QA */
{
pPacket = RTMP_AllocateRxPacketBuffer(pAd, ((POS_COOKIE)(pAd->OS_Cookie))->pci_dev,
pATEInfo->TxLength, FALSE, &AllocVa, &AllocPa);
}
if (pPacket == NULL)
{
pATEInfo->TxCount = 0;
DBGPRINT_ERR(("%s : fail to alloc packet space.\n", __FUNCTION__));
return -1;
}
pTxRing->Cell[TxIdx].pNextNdisPacket = pPacket;
pDest = (PUCHAR) AllocVa;
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
GET_OS_PKT_LEN(pPacket) = pATEInfo->DLen;
GET_OS_PKT_TOTAL_LEN(pPacket) = pATEInfo->DLen;
}
else
#endif /* RALINK_QA */
{
GET_OS_PKT_LEN(pPacket) = pATEInfo->TxLength - LENGTH_802_11;
GET_OS_PKT_TOTAL_LEN(pPacket) = pATEInfo->TxLength - LENGTH_802_11;
}
/* prepare frame payload */
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
/* copy pattern to payload */
if ((pATEInfo->PLen != 0))
{
for (pos = 0; pos < pATEInfo->DLen; pos += pATEInfo->PLen)
{
memcpy(GET_OS_PKT_DATAPTR(pPacket) + pos, pATEInfo->Pattern, pATEInfo->PLen);
}
}
}
else
#endif /* RALINK_QA */
{
for (pos = 0; pos < GET_OS_PKT_LEN(pPacket); pos++)
{
/* default payload is 0xA5 */
pDest[pos] = pATEInfo->Payload;
}
}
/* build Tx descriptor */
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
#endif /* !RT_BIG_ENDIAN */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
/* prepare TxD */
NdisZeroMemory(pTxD, TXD_SIZE);
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
/* build Tx descriptor */
pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
pTxD->SDLen0 = TXWISize + pATEInfo->HLen;
pTxD->SDPtr1 = AllocPa;
pTxD->SDLen1 = GET_OS_PKT_LEN(pPacket);
pTxD->LastSec0 = (pTxD->SDLen1 == 0) ? 1 : 0;
pTxD->LastSec1 = 1;
pDest = (PUCHAR)pTxWI;
pDest += TXWISize;
pHeader80211 = (PHEADER_802_11)pDest;
/* modify sequence number... */
if (pATEInfo->TxDoneCount == 0)
pATEInfo->seq = pHeader80211->Sequence;
else
pHeader80211->Sequence = ++pATEInfo->seq;
}
else
#endif /* RALINK_QA */
{
NdisZeroMemory(pTxD, TXD_SIZE);
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
/* build Tx descriptor */
pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow (pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
pTxD->SDLen0 = TXWISize + LENGTH_802_11;
pTxD->LastSec0 = 0;
pTxD->SDPtr1 = AllocPa;
pTxD->SDLen1 = GET_OS_PKT_LEN(pPacket);
pTxD->LastSec1 = 1;
}
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA) + TXWISize), DIR_WRITE, FALSE);
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif /* RT_BIG_ENDIAN */
return 0;
}
NDIS_STATUS MlmeHardTransmitTxRing(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
IN PNDIS_PACKET pPacket)
{
PACKET_INFO PacketInfo;
PUCHAR pSrcBufVA;
UINT SrcBufLen;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
PHEADER_802_11 pHeader_802_11;
BOOLEAN bAckRequired, bInsertTimestamp;
ULONG SrcBufPA;
//UCHAR TxBufIdx;
UCHAR MlmeRate;
ULONG SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
PTXWI_STRUC pFirstTxWI;
//ULONG i;
//HTTRANSMIT_SETTING MlmeTransmit; //Rate for this MGMT frame.
ULONG FreeNum;
MAC_TABLE_ENTRY *pMacEntry = NULL;
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
if (pSrcBufVA == NULL)
{
// The buffer shouldn't be NULL
return NDIS_STATUS_FAILURE;
}
// Make sure MGMT ring resource won't be used by other threads
//NdisAcquireSpinLock(&pAd->TxRingLock);
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNum == 0)
{
//NdisReleaseSpinLock(&pAd->TxRingLock);
return NDIS_STATUS_FAILURE;
}
SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC)pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
#endif
if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket)
{
DBGPRINT(RT_DEBUG_OFF, ("MlmeHardTransmit Error\n"));
//NdisReleaseSpinLock(&pAd->TxRingLock);
return NDIS_STATUS_FAILURE;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// outgoing frame always wakeup PHY to prevent frame lost
// if (pAd->StaCfg.Psm == PWR_SAVE)
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, TRUE);
}
#endif // CONFIG_STA_SUPPORT //
pFirstTxWI =(PTXWI_STRUC)pSrcBufVA;
pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXWI_SIZE);
if (pHeader_802_11->Addr1[0] & 0x01)
{
MlmeRate = pAd->CommonCfg.BasicMlmeRate;
}
else
{
MlmeRate = pAd->CommonCfg.MlmeRate;
}
if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL))
{
pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
}
// Verify Mlme rate for a / g bands.
if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) // 11A band
MlmeRate = RATE_6;
//
// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
// Snice it's been set to 0 while on MgtMacHeaderInit
// By the way this will cause frame to be send on PWR_SAVE failed.
//
//
// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
#ifdef CONFIG_STA_SUPPORT
// Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
if (pHeader_802_11->FC.Type != BTYPE_DATA)
{
if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_REQ) || !(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
{
pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
}
else
{
pHeader_802_11->FC.PwrMgmt = pAd->CommonCfg.bAPSDForcePowerSave;
}
}
#endif // CONFIG_STA_SUPPORT //
bInsertTimestamp = FALSE;
if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
{
bAckRequired = FALSE;
}
else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
{
if (pHeader_802_11->Addr1[0] & 0x01) // MULTICAST, BROADCAST
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
}
else
{
bAckRequired = TRUE;
pHeader_802_11->Duration = RTMPCalcDuration(pAd, MlmeRate, 14);
if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
{
bInsertTimestamp = TRUE;
}
}
}
pHeader_802_11->Sequence = pAd->Sequence++;
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
// Before radar detection done, mgmt frame can not be sent but probe req
// Because we need to use probe req to trigger driver to send probe req in passive scan
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE))
{
DBGPRINT(RT_DEBUG_ERROR,("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
//NdisReleaseSpinLock(&pAd->TxRingLock);
return (NDIS_STATUS_FAILURE);
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
#endif
//
// fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
// should always has only one ohysical buffer, and the whole frame size equals
// to the first scatter buffer size
//
// Initialize TX Descriptor
// For inter-frame gap, the number is for this frame and next frame
// For MLME rate, we will fix as 2Mb to match other vendor's implement
// pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
// Only beacon use Nseq=TRUE. So here we use Nseq=FALSE.
if (pMacEntry == NULL)
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, RESERVED_WCID, (SrcBufLen - TXWI_SIZE), PID_MGMT, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
}
else
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, pMacEntry->Aid, (SrcBufLen - TXWI_SIZE),
pMacEntry->MaxHTPhyMode.field.MCS, 0,
(UCHAR)pMacEntry->MaxHTPhyMode.field.MCS,
IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
}
pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
// pFirstTxWI->MPDUtotalByteCount = SrcBufLen - TXWI_SIZE;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI);
#endif
SrcBufPA = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_EDCA);
pTxD->LastSec0 = 1;
pTxD->LastSec1 = 1;
pTxD->SDLen0 = SrcBufLen;
pTxD->SDLen1 = 0;
pTxD->SDPtr0 = SrcBufPA;
pTxD->DMADONE = 0;
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif
pAd->RalinkCounters.KickTxCount++;
pAd->RalinkCounters.OneSecTxDoneCount++;
// Increase TX_CTX_IDX, but write to register later.
INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx*0x10, pAd->TxRing[QueIdx].TxCpuIdx);
// Make sure to release MGMT ring resource
// NdisReleaseSpinLock(&pAd->TxRingLock);
return NDIS_STATUS_SUCCESS;
}
USHORT RtmpPCI_WriteMultiTxResource(
IN PRTMP_ADAPTER pAd,
IN TX_BLK *pTxBlk,
IN UCHAR frameNum,
OUT USHORT *FreeNumber)
{
BOOLEAN bIsLast;
UCHAR *pDMAHeaderBufVA;
USHORT TxIdx, RetTxIdx;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
UINT32 BufBasePaLow;
PRTMP_TX_RING pTxRing;
USHORT hwHdrLen;
UINT32 firstDMALen;
bIsLast = ((frameNum == (pTxBlk->TotalFrameNum - 1)) ? 1 : 0);
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
if (frameNum == 0)
{
if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD + pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
else if (pTxBlk->TxFrameType == TX_RALINK_FRAME)
hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_ARALINK_HEADER_FIELD + pTxBlk->HdrPadLen + LENGTH_ARALINK_HEADER_FIELD;
else
hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHdrLen;
}
else
{
firstDMALen = pTxBlk->MpduHeaderLen;
}
NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
#endif
NdisZeroMemory(pTxD, TXD_SIZE);
pTxD->SDPtr0 = BufBasePaLow;
pTxD->SDLen0 = firstDMALen;
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = 0;
pTxD->LastSec1 = (bIsLast) ? 1 : 0;
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
#ifdef RT_BIG_ENDIAN
if (frameNum == 0)
RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA+ TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
if (frameNum != 0)
RTMPWIEndianChange((PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI);
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif
RetTxIdx = TxIdx;
INC_RING_INDEX(TxIdx, TX_RING_SIZE);
pTxRing->TxCpuIdx = TxIdx;
*FreeNumber -= 1;
return RetTxIdx;
}
USHORT RtmpPCI_WriteFragTxResource(
IN PRTMP_ADAPTER pAd,
IN TX_BLK *pTxBlk,
IN UCHAR fragNum,
OUT USHORT *FreeNumber)
{
UCHAR *pDMAHeaderBufVA;
USHORT TxIdx, RetTxIdx;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
UINT32 BufBasePaLow;
PRTMP_TX_RING pTxRing;
USHORT hwHeaderLen;
UINT32 firstDMALen;
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen;
NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
#endif
NdisZeroMemory(pTxD, TXD_SIZE);
if (fragNum == pTxBlk->TotalFragNum)
{
pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
}
pTxD->SDPtr0 = BufBasePaLow;
pTxD->SDLen0 = firstDMALen;
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = 0;
pTxD->LastSec1 = 1;
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI);
RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif
RetTxIdx = TxIdx;
pTxBlk->Priv += pTxBlk->SrcBufLen;
INC_RING_INDEX(TxIdx, TX_RING_SIZE);
pTxRing->TxCpuIdx = TxIdx;
*FreeNumber -= 1;
return RetTxIdx;
}
NDIS_STATUS MlmeHardTransmitTxRing(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
IN PNDIS_PACKET pPacket)
{
PACKET_INFO PacketInfo;
PUCHAR pSrcBufVA;
UINT SrcBufLen;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
PHEADER_802_11 pHeader_802_11;
BOOLEAN bAckRequired, bInsertTimestamp;
ULONG SrcBufPA;
UCHAR MlmeRate;
ULONG SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
PTXWI_STRUC pFirstTxWI;
ULONG FreeNum;
MAC_TABLE_ENTRY *pMacEntry = NULL;
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
if (pSrcBufVA == NULL)
{
return NDIS_STATUS_FAILURE;
}
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNum == 0)
{
return NDIS_STATUS_FAILURE;
}
SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC)pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
#endif
if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket)
{
DBGPRINT(RT_DEBUG_OFF, ("MlmeHardTransmit Error\n"));
return NDIS_STATUS_FAILURE;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, TRUE);
}
#endif
pFirstTxWI =(PTXWI_STRUC)pSrcBufVA;
pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXWI_SIZE);
if (pHeader_802_11->Addr1[0] & 0x01)
{
MlmeRate = pAd->CommonCfg.BasicMlmeRate;
}
else
{
MlmeRate = pAd->CommonCfg.MlmeRate;
}
if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL))
{
pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
}
if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6))
MlmeRate = RATE_6;
#ifdef CONFIG_STA_SUPPORT
if (pHeader_802_11->FC.Type != BTYPE_DATA)
{
if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_REQ) || !(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
{
pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
}
else
{
pHeader_802_11->FC.PwrMgmt = pAd->CommonCfg.bAPSDForcePowerSave;
}
}
#endif
bInsertTimestamp = FALSE;
if (pHeader_802_11->FC.Type == BTYPE_CNTL)
{
bAckRequired = FALSE;
}
else
{
if (pHeader_802_11->Addr1[0] & 0x01)
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
}
else
{
bAckRequired = TRUE;
pHeader_802_11->Duration = RTMPCalcDuration(pAd, MlmeRate, 14);
if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
{
bInsertTimestamp = TRUE;
}
}
}
pHeader_802_11->Sequence = pAd->Sequence++;
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE))
{
DBGPRINT(RT_DEBUG_ERROR,("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
return (NDIS_STATUS_FAILURE);
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
#endif
if (pMacEntry == NULL)
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, RESERVED_WCID, (SrcBufLen - TXWI_SIZE), PID_MGMT, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
}
else
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, pMacEntry->Aid, (SrcBufLen - TXWI_SIZE),
pMacEntry->MaxHTPhyMode.field.MCS, 0,
(UCHAR)pMacEntry->MaxHTPhyMode.field.MCS,
IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
}
pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI);
#endif
SrcBufPA = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_EDCA);
pTxD->LastSec0 = 1;
pTxD->LastSec1 = 1;
pTxD->SDLen0 = SrcBufLen;
pTxD->SDLen1 = 0;
pTxD->SDPtr0 = SrcBufPA;
pTxD->DMADONE = 0;
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif
pAd->RalinkCounters.KickTxCount++;
pAd->RalinkCounters.OneSecTxDoneCount++;
INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx*0x10, pAd->TxRing[QueIdx].TxCpuIdx);
return NDIS_STATUS_SUCCESS;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;/*, TimLen = 4, */
/*BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen; */
/* UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2; */
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue;
HTTRANSMIT_SETTING BeaconTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
#ifdef SPECIFIC_BCN_BUF_SUPPORT
unsigned long irqFlag = 0;
#endif /* SPECIFIC_BCN_BUF_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
#ifdef P2P_SUPPORT
pAd->ApCfg.MBSSID[apidx].Bssid,
#endif /* P2P_SUPPORT */
pAd->ApCfg.MBSSID[apidx].Bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == PHY_11B)
SupRateLen = 4;
#ifdef P2P_SUPPORT
if (P2P_GO_ON(pAd))
{
UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR SupRateIe = IE_SUPP_RATES;
UCHAR SupRateLen = 0;
SupRate[0] = 0x8C; /* 6 mbps, in units of 0.5 Mbps, basic rate */
SupRate[1] = 0x12; /* 9 mbps, in units of 0.5 Mbps */
SupRate[2] = 0x98; /* 12 mbps, in units of 0.5 Mbps, basic rate */
SupRate[3] = 0x24; /* 18 mbps, in units of 0.5 Mbps */
SupRate[4] = 0xb0; /* 24 mbps, in units of 0.5 Mbps, basic rate */
SupRate[5] = 0x48; /* 36 mbps, in units of 0.5 Mbps */
SupRate[6] = 0x60; /* 48 mbps, in units of 0.5 Mbps */
SupRate[7] = 0x6c; /* 54 mbps, in units of 0.5 Mbps */
SupRateLen = 8;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, &SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
}
else
#endif /* P2P_SUPPORT */
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != PHY_11B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
/* UCHAR TmpFrame[256]; */
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/* 802.11n D2.0 Annex J */
/* USA */
/* regulatory class 32, channel set 1~7 */
/* regulatory class 33, channel set 5-11 */
UCHAR rclass32[]= {32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]= {33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
/* */
/* step 6. move BEACON TXD and frame content to on-chip memory */
/* */
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (higher 8KB shared memory)
*/
RTMP_MAC_SHR_MSEL_LOCK(pAd, HIGHER_SHRMEM, irqFlag);
#endif /* SPECIFIC_BCN_BUF_SUPPORT */
for (i=0; i<TXWI_SIZE; i+=4) /* 16-byte TXWI field */
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + i, longValue);
ptr += 4;
}
/* update BEACON frame content. start right after the 16-byte TXWI field. */
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWI_SIZE + i, longValue);
ptr += 4;
}
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (lower 16KB shared memory)
*/
RTMP_MAC_SHR_MSEL_UNLOCK(pAd, LOWER_SHRMEM, irqFlag);
#endif /* SPECIFIC_BCN_BUF_SUPPORT */
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Setup Frame format.
NOTE:
This routine should only be used in ATE mode.
==========================================================================
*/
INT ATESetUpFrame(
IN PRTMP_ADAPTER pAd,
IN UINT32 TxIdx)
{
PATE_INFO pATEInfo = &(pAd->ate);
UINT pos = 0;
TXINFO_STRUC *pTxInfo;
TXD_STRUC *pTxD;
#ifdef RT_BIG_ENDIAN
TXD_STRUC *pDestTxD;
UCHAR tx_hw_info[TXD_SIZE];
#endif /* RT_BIG_ENDIAN */
PNDIS_PACKET pPacket=NULL;
PUCHAR pDest=NULL;
PVOID AllocVa=NULL;
NDIS_PHYSICAL_ADDRESS AllocPa;
HTTRANSMIT_SETTING TxHTPhyMode;
RTMP_TX_RING *pTxRing = &pAd->TxRing[QID_AC_BE];
TXWI_STRUC *pTxWI = (TXWI_STRUC *)pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
PUCHAR pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
UINT8 TXWISize = pAd->chipCap.TXWISize;
#ifdef RALINK_QA
PHEADER_802_11 pHeader80211;
#endif /* RALINK_QA */
UCHAR bw, sgi, stbc, mcs, phy_mode, frag, cfack, ts, ampdu, ack, nseq, bawinsize, pkt_id, txop;
USHORT byte_cnt;
bw = sgi = stbc = mcs = phy_mode = frag = cfack = ts =0;
ampdu = ack = nseq = bawinsize = pkt_id = txop = 0;
byte_cnt = 0;
#ifdef RLT_MAC
if (pAd->chipCap.hif_type == HIF_RLT)
{
bw = pATEInfo->TxWI.TXWI_N.BW;
sgi = pATEInfo->TxWI.TXWI_N.ShortGI;
stbc = pATEInfo->TxWI.TXWI_N.STBC;
mcs = pATEInfo->TxWI.TXWI_N.MCS;
phy_mode = pATEInfo->TxWI.TXWI_N.PHYMODE;
frag = pATEInfo->TxWI.TXWI_N.FRAG;
cfack = pATEInfo->TxWI.TXWI_N.CFACK,
ts = pATEInfo->TxWI.TXWI_N.TS;
ampdu = pATEInfo->TxWI.TXWI_N.AMPDU;
ack = pATEInfo->TxWI.TXWI_N.ACK;
nseq = pATEInfo->TxWI.TXWI_N.NSEQ;
bawinsize =pATEInfo->TxWI.TXWI_N.BAWinSize;
byte_cnt = pATEInfo->TxWI.TXWI_N.MPDUtotalByteCnt;
pkt_id = pATEInfo->TxWI.TXWI_N.TxPktId;
txop = pATEInfo->TxWI.TXWI_N.txop;
cfack = pATEInfo->TxWI.TXWI_N.CFACK;
}
#endif /* RLT_MAC */
/* fill TxWI */
TxHTPhyMode.field.BW = bw;
TxHTPhyMode.field.ShortGI = sgi;
TxHTPhyMode.field.STBC = stbc;
TxHTPhyMode.field.MCS = mcs;
TxHTPhyMode.field.MODE = phy_mode;
if (pATEInfo->bQATxStart == TRUE)
{
/* always use QID_AC_BE and FIFO_EDCA */
ATEWriteTxWI(pAd, pTxWI, frag, cfack,
ts, ampdu, ack,
nseq, bawinsize, 0,
byte_cnt, pkt_id, 0, 0,
txop, cfack,
&TxHTPhyMode);
#ifdef TXBF_SUPPORT
#ifdef RELEASE_EXCLUDE
/* It will affect transmit data rate ??? But QA is tested... */
#endif /* RELEASE_EXCLUDE */
#ifdef RLT_MAC
if (IS_MT76x0(pAd))
{
/* Must copy rsv bits to actual TxWI */
// pTxWI->TXWI_N.rsv = pATEInfo->TxWI.TXWI_N.rsv;
pTxWI->TXWI_N.iTxBF = pATEInfo->TxWI.TXWI_N.iTxBF;
pTxWI->TXWI_N.Sounding = pATEInfo->TxWI.TXWI_N.Sounding;
pTxWI->TXWI_N.eTxBF = pATEInfo->TxWI.TXWI_N.eTxBF;
// pTxWI->TXWI_N.Autofallback = pATEInfo->TxWI.TXWI_N.Autofallback;
pTxWI->TXWI_N.NDPSndBW = pATEInfo->TxWI.TXWI_N.NDPSndBW;
pTxWI->TXWI_N.NDPSndRate = pATEInfo->TxWI.TXWI_N.NDPSndRate;
}
#endif /* RLT_MAC */
#endif /* TXBF_SUPPORT */
}
else
{
ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE,
4, 0, pATEInfo->TxLength, 0, 0, 0, IFS_HTTXOP, FALSE, &TxHTPhyMode);
}
/* fill 802.11 header */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
NdisMoveMemory(pDMAHeaderBufVA + TXWISize, pATEInfo->Header, pATEInfo->HLen);
}
else
#endif /* RALINK_QA */
{
pATEInfo->HLen = LENGTH_802_11;
#ifdef TXBF_SUPPORT
TemplateFrame[0] = 0x08; /* Data */
TemplateFrame[1] = 0x00;
if (pATEInfo->bTxBF && pATEInfo->txSoundingMode!=0)
{
/* QoS Data */
pATEInfo->HLen = 32;
TemplateFrame[0] = 0x88;
TemplateFrame[1] = 0x80;
switch (pATEInfo->txSoundingMode)
{
case 1:
/* Data Sounding */
TemplateFrame[28] = pAd->CommonCfg.ETxBfNoncompress? 0x80: 0xc0;
TemplateFrame[29] = 0x00;
break;
case 2:
case 3:
/* 2 or 3 Stream NDP */
TemplateFrame[28] = pAd->CommonCfg.ETxBfNoncompress? 0x80: 0xc0;
TemplateFrame[29] = 0x01; /* NDP Announce */
break;
default:
TemplateFrame[28] = TemplateFrame[29] = 0x0;
}
}
#endif /* TXBF_SUPPORT */
NdisMoveMemory(pDMAHeaderBufVA + TXWISize, TemplateFrame, pATEInfo->HLen);
NdisMoveMemory(pDMAHeaderBufVA + TXWISize + 4, pATEInfo->Addr1, MAC_ADDR_LEN);
NdisMoveMemory(pDMAHeaderBufVA + TXWISize + 10, pATEInfo->Addr2, MAC_ADDR_LEN);
NdisMoveMemory(pDMAHeaderBufVA + TXWISize + 16, pATEInfo->Addr3, MAC_ADDR_LEN);
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA) + TXWISize), DIR_READ, FALSE);
#endif /* RT_BIG_ENDIAN */
/* alloc buffer for payload */
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
pPacket = RTMP_AllocateRxPacketBuffer(pAd, ((POS_COOKIE)(pAd->OS_Cookie))->pci_dev,
pATEInfo->DLen + 0x100, FALSE, &AllocVa, &AllocPa);
}
else
#endif /* RALINK_QA */
{
pPacket = RTMP_AllocateRxPacketBuffer(pAd, ((POS_COOKIE)(pAd->OS_Cookie))->pci_dev,
pATEInfo->TxLength, FALSE, &AllocVa, &AllocPa);
}
/* error check */
if (pPacket == NULL)
{
pATEInfo->TxCount = 0;
DBGPRINT_ERR(("%s : fail to alloc packet space.\n", __FUNCTION__));
return -1;
}
pTxRing->Cell[TxIdx].pNdisPacket = pPacket;
pDest = (PUCHAR) AllocVa;
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
GET_OS_PKT_LEN(pPacket) = pATEInfo->DLen;
#ifndef LINUX
GET_OS_PKT_TOTAL_LEN(pPacket) = pATEInfo->DLen;
#endif /* LIMUX */
}
else
#endif /* RALINK_QA */
{
GET_OS_PKT_LEN(pPacket) = pATEInfo->TxLength - pATEInfo->HLen;
#ifndef LINUX
GET_OS_PKT_TOTAL_LEN(pPacket) = pATEInfo->TxLength - pATEInfo->HLen;
#endif /* LINUX */
}
/* prepare frame payload */
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
/* copy pattern to payload */
if ((pATEInfo->PLen != 0))
{
for (pos = 0; pos < pATEInfo->DLen; pos += pATEInfo->PLen)
{
memcpy(GET_OS_PKT_DATAPTR(pPacket) + pos, pATEInfo->Pattern, pATEInfo->PLen);
}
}
}
else
#endif /* RALINK_QA */
{
for (pos = 0; pos < GET_OS_PKT_LEN(pPacket); pos++)
{
#ifdef RELEASE_EXCLUDE
/* kurtis: 0xAA ATE test EVM will be positive */
#endif /* RELEASE_EXCLUDE */
/* default payload is 0xA5 */
pDest[pos] = pATEInfo->Payload;
}
}
/* build Tx descriptor */
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
pTxInfo = (TXINFO_STRUC *)(pTxRing->Cell[TxIdx].AllocVa + sizeof(TXD_STRUC));
#else
pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
NdisMoveMemory(&tx_hw_info[0], (UCHAR *)pDestTxD, TXD_SIZE);
pTxD = (TXD_STRUC *)&tx_hw_info[0];
pTxInfo = (TXINFO_STRUC *)(&tx_hw_info[0] + sizeof(TXD_STRUC));
#endif /* !RT_BIG_ENDIAN */
{
/* prepare TxD */
TX_BLK txblk;
txblk.SrcBufLen = GET_OS_PKT_LEN(pPacket);
txblk.pSrcBufData = AllocVa;
NdisZeroMemory(pTxD, TXD_SIZE);
/* build Tx descriptor */
pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow (pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
pTxD->SDLen0 = TXWISize + pATEInfo->HLen;
pTxD->LastSec0 = 0;
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, &txblk, 0, 1, RTMP_PCI_DMA_TODEVICE);
pTxD->SDLen1 = GET_OS_PKT_LEN(pPacket);
pTxD->LastSec1 = 1;
ral_write_txd(pAd, pTxD, pTxInfo, FALSE, FIFO_EDCA);
}
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
pDest = (PUCHAR)pTxWI;
pDest += TXWISize;
pHeader80211 = (PHEADER_802_11)pDest;
/* modify sequence number... */
if (pATEInfo->TxDoneCount == 0)
pATEInfo->seq = pHeader80211->Sequence;
else
pHeader80211->Sequence = ++pATEInfo->seq;
}
#endif /* RALINK_QA */
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA) + TXWISize), DIR_WRITE, FALSE);
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif /* RT_BIG_ENDIAN */
return 0;
}
USHORT RtmpPCI_WriteFragTxResource(
IN PRTMP_ADAPTER pAd,
IN TX_BLK *pTxBlk,
IN UCHAR fragNum,
OUT USHORT *FreeNumber)
{
UCHAR *pDMAHeaderBufVA;
USHORT TxIdx, RetTxIdx;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
UINT32 BufBasePaLow;
PRTMP_TX_RING pTxRing;
USHORT hwHeaderLen;
UINT32 firstDMALen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
/* Get Tx Ring Resource*/
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
/* Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer*/
/*hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);*/
hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
firstDMALen = TXINFO_SIZE + TXWISize + hwHeaderLen;
NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
/* Build Tx Descriptor*/
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
#endif
NdisZeroMemory(pTxD, TXD_SIZE);
if (fragNum == pTxBlk->TotalFragNum)
{
pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
}
pTxD->SDPtr0 = BufBasePaLow;
pTxD->SDLen0 = firstDMALen; /* include padding*/
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, RTMP_PCI_DMA_TODEVICE);
pTxD->SDLen1 = pTxBlk->SrcBufLen;
if (pTxD->SDLen1 > 0)
{
pTxD->LastSec0 = 0;
pTxD->LastSec1 = 1;
}
else
{
pTxD->LastSec0 = 1;
pTxD->LastSec1 = 0;
}
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI);
RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE + TXWISize), DIR_WRITE, FALSE);
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif /* RT_BIG_ENDIAN */
RetTxIdx = TxIdx;
pTxBlk->Priv += pTxBlk->SrcBufLen;
/* flush dcache if no consistent memory is supported */
RTMP_DCACHE_FLUSH(pTxRing->Cell[TxIdx].DmaBuf.AllocPa, pTxD->SDLen0);
RTMP_DCACHE_FLUSH(pTxBlk->pSrcBufData, pTxBlk->SrcBufLen);
RTMP_DCACHE_FLUSH(pTxRing->Cell[TxIdx].AllocPa, RXD_SIZE);
/* Update Tx index*/
INC_RING_INDEX(TxIdx, TX_RING_SIZE);
pTxRing->TxCpuIdx = TxIdx;
*FreeNumber -= 1;
return RetTxIdx;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pAd->ApCfg.MBSSID[apidx].Bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
ULONG FrameLen = pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon;
ULONG UpdatePos = pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
MULTISSID_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
UCHAR PhyMode;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
pMbss = &pAd->ApCfg.MBSSID[apidx];
pComCfg = &pAd->CommonCfg;
PhyMode = pMbss->PhyMode;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->CapabilityInfoLocationInBeacon;
*ptr = (UCHAR)(pMbss->CapabilityInfo & 0x00ff);
*(ptr+1) = (UCHAR)((pMbss->CapabilityInfo & 0xff00) >> 8);
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
#ifdef HOSTAPD_SUPPORT
if ( pAd->ApCfg.MBSSID[apidx].HostapdWPS && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
#ifdef WSC_AP_SUPPORT
/* add Simple Config Information Element */
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen)))
{
bHasWpsIE = TRUE;
}
#endif /* WSC_AP_SUPPORT */
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen, pAd->ApCfg.MBSSID[apidx].WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
#ifdef WSC_AP_SUPPORT
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif /* DOT1X_SUPPORT */
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http:msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif /* WSC_AP_SUPPORT */
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if ((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (pMbss->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &pComCfg->HtCapability,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
#if defined(DOT11N_DRAFT3) || defined(DOT11V_WNM_SUPPORT)
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* defined(DOT11N_DRAFT3) || defined(DOT11V_WNM_SUPPORT) */
if ((pMbss->AuthMode == Ndis802_11AuthModeWPA) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((pMbss->AuthMode == Ndis802_11AuthModeWPA2) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
#ifdef WAPI_SUPPORT
else if ((pMbss->AuthMode == Ndis802_11AuthModeWAICERT) ||
(pMbss->AuthMode == Ndis802_11AuthModeWAIPSK))
RSNIe = IE_WAPI;
#endif /* WAPI_SUPPORT */
/* Append RSN_IE when WPA OR WPAPSK, */
if ((pMbss->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (pMbss->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add WMM IE here */
if (pMbss->bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->FlgQloadEnable != 0)
{
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
}
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(pMbss->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2;*/ /* no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, 0xff,
FrameLen, PID_MGMT, QID_MGMT, 0, IFS_HTTXOP, FALSE, &BeaconTransmit);
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
}
/*
========================================================================
Routine Description:
Get a received packet.
Arguments:
pAd device control block
pSaveRxD receive descriptor information
*pbReschedule need reschedule flag
*pRxPending pending received packet flag
Return Value:
the recieved packet
Note:
========================================================================
*/
PNDIS_PACKET GetPacketFromRxRing(
IN PRTMP_ADAPTER pAd,
OUT PRT28XX_RXD_STRUC pSaveRxD,
OUT BOOLEAN *pbReschedule,
IN OUT UINT32 *pRxPending)
{
PRX_CONTEXT pRxContext;
PNDIS_PACKET pNetPkt;
PUCHAR pData;
ULONG ThisFrameLen;
ULONG RxBufferLength;
PRXWI_STRUC pRxWI;
pRxContext = &pAd->RxContext[pAd->NextRxBulkInReadIndex];
if ((pRxContext->Readable == FALSE) || (pRxContext->InUse == TRUE))
return NULL;
RxBufferLength = pRxContext->BulkInOffset - pAd->ReadPosition;
if (RxBufferLength < (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXWI_STRUC) + sizeof(RXINFO_STRUC)))
{
goto label_null;
}
pData = &pRxContext->TransferBuffer[pAd->ReadPosition]; /* 4KB */
// The RXDMA field is 4 bytes, now just use the first 2 bytes. The Length including the (RXWI + MSDU + Padding)
ThisFrameLen = *pData + (*(pData+1)<<8);
if (ThisFrameLen == 0)
{
DBGPRINT(RT_DEBUG_TRACE, ("BIRIdx(%d): RXDMALen is zero.[%ld], BulkInBufLen = %ld)\n",
pAd->NextRxBulkInReadIndex, ThisFrameLen, pRxContext->BulkInOffset));
goto label_null;
}
if ((ThisFrameLen&0x3) != 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("BIRIdx(%d): RXDMALen not multiple of 4.[%ld], BulkInBufLen = %ld)\n",
pAd->NextRxBulkInReadIndex, ThisFrameLen, pRxContext->BulkInOffset));
goto label_null;
}
if ((ThisFrameLen + 8)> RxBufferLength) // 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC))
{
DBGPRINT(RT_DEBUG_TRACE,("BIRIdx(%d):FrameLen(0x%lx) outranges. BulkInLen=0x%lx, remaining RxBufLen=0x%lx, ReadPos=0x%lx\n",
pAd->NextRxBulkInReadIndex, ThisFrameLen, pRxContext->BulkInOffset, RxBufferLength, pAd->ReadPosition));
// error frame. finish this loop
goto label_null;
}
// skip USB frame length field
pData += RT2870_RXDMALEN_FIELD_SIZE;
pRxWI = (PRXWI_STRUC)pData;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pData, TYPE_RXWI);
#endif // RT_BIG_ENDIAN //
if (pRxWI->MPDUtotalByteCount > ThisFrameLen)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s():pRxWIMPDUtotalByteCount(%d) large than RxDMALen(%ld)\n",
__FUNCTION__, pRxWI->MPDUtotalByteCount, ThisFrameLen));
goto label_null;
}
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pData, TYPE_RXWI);
#endif // RT_BIG_ENDIAN //
// allocate a rx packet
pNetPkt = RTMP_AllocateFragPacketBuffer(pAd, ThisFrameLen);
if (pNetPkt == NULL)
{
DBGPRINT(RT_DEBUG_ERROR,("%s():Cannot Allocate sk buffer for this Bulk-In buffer!\n", __FUNCTION__));
goto label_null;
}
// copy the rx packet
memcpy(skb_put(pNetPkt, ThisFrameLen), pData, ThisFrameLen);
GET_OS_PKT_NETDEV(pNetPkt) = get_netdev_from_bssid(pAd, BSS0);;
RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pNetPkt), PKTSRC_NDIS);
// copy RxD
*pSaveRxD = *(PRXINFO_STRUC)(pData + ThisFrameLen);
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pSaveRxD, TYPE_RXINFO);
#endif // RT_BIG_ENDIAN //
// update next packet read position.
pAd->ReadPosition += (ThisFrameLen + RT2870_RXDMALEN_FIELD_SIZE + RXINFO_SIZE); // 8 for (RT2870_RXDMALEN_FIELD_SIZE + sizeof(RXINFO_STRUC))
return pNetPkt;
label_null:
return NULL;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#if defined(DOT11_N_SUPPORT) && defined(DOT11K_RRM_SUPPORT)
UINT i;
#endif /* defined(DOT11_N_SUPPORT) && defined(DOT11K_RRM_SUPPORT) */
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
PhyMode = pMbss->wdev.PhyMode;
if (pMbss->bHideSsid)
SsidLen = 0;
else
SsidLen = pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx)
&& (pAd->CommonCfg.RegulatoryClass[0] != 0))
{
TmpLen2 = 0;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
RguClass_BuildBcnChList(pAd, TmpFrame, &TmpLen2);
}
#endif /* DOT11K_RRM_SUPPORT */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx))
{
InsertTpcReportIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
RTMP_GetTxPwr(pAd, pAd->CommonCfg.MlmeTransmit), 0);
RRM_InsertRRMEnCapIE(pAd, pBeaconFrame+FrameLen, &FrameLen, apidx);
}
#endif /* DOT11K_RRM_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
#ifdef DOT11K_RRM_SUPPORT
for (i=0; i<MAX_NUM_OF_REGULATORY_CLASS; i++)
{
if (pAd->CommonCfg.RegulatoryClass[i] == 0)
break;
InsertChannelRepIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
(PSTRING)pAd->CommonCfg.CountryCode,
pAd->CommonCfg.RegulatoryClass[i]);
}
#else
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11R_FT_SUPPORT
/* The Mobility Domain information element (MDIE) is present in Beacon
** frame when dot11FastBssTransitionEnable is set to true. */
if (pAd->ApCfg.MBSSID[apidx].FtCfg.FtCapFlag.Dot11rFtEnable)
{
PFT_CFG pFtCfg = &pAd->ApCfg.MBSSID[apidx].FtCfg;
FT_CAP_AND_POLICY FtCap;
NdisZeroMemory(&FtCap, sizeof(FT_CAP_AND_POLICY));
FtCap.field.FtOverDs = pFtCfg->FtCapFlag.FtOverDs;
FtCap.field.RsrReqCap = pFtCfg->FtCapFlag.RsrReqCap;
FT_InsertMdIE(pAd, pBeaconFrame + FrameLen, &FrameLen,
pFtCfg->FtMdId, FtCap);
}
#endif /* DOT11R_FT_SUPPORT */
BeaconTransmit.word = 0;
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
updateAllBeacon(pAd, apidx, FrameLen);
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
void updateAllBeacon(RTMP_ADAPTER *pAd, INT apidx, ULONG FrameLen)
{
UCHAR *ptr = NULL;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
UINT32 longValue, reg_base;
UINT i = 0;
UINT8 TXWISize = pAd->chipCap.TXWISize;
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pMbss->BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
}
/*
========================================================================
Routine Description:
In the case, Client may be silent left without sending DeAuth or DeAssoc.
AP'll continue retry packets for the client since AP doesn't know the STA
is gone. To Minimum affection of exist traffic is disable retransmition for
all those packet relative to the STA.
So decide to change ack required setting of all packet in TX ring
to "no ACK" requirement for specific Client.
Arguments:
Adapter Pointer to our adapter
Return Value:
None
IRQL = DISPATCH_LEVEL
========================================================================
*/
static VOID ClearTxRingClientAck(RTMP_ADAPTER *pAd, MAC_TABLE_ENTRY *pEntry)
{
UINT8 TXWISize;
if (!pAd || !pEntry)
return;
TXWISize = pAd->chipCap.TXWISize;
#ifdef RLT_MAC
if (pAd->chipCap.hif_type == HIF_RLT) {
DBGPRINT(RT_DEBUG_OFF, ("%s(): TBD for this function!\n", __FUNCTION__));
}
#endif /* RLT_MAC */
#ifdef RTMP_MAC
if (pAd->chipCap.hif_type == HIF_RTMP) {
INT index;
USHORT TxIdx;
RTMP_TX_RING *pTxRing;
TXD_STRUC *pTxD;
TXWI_STRUC *pTxWI;
#ifdef RT_BIG_ENDIAN
TXD_STRUC TxD, *pDestTxD;
TXWI_STRUC TxWI, *pDestTxWI;
#endif /* RT_BIG_ENDIAN */
for (index = 3; index >= 0; index--)
{
pTxRing = &pAd->TxRing[index];
for (TxIdx = 0; TxIdx < TX_RING_SIZE; TxIdx++)
{
#ifdef RT_BIG_ENDIAN
pDestTxD = (TXD_STRUC *) pTxRing->Cell[TxIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
#else
pTxD = (TXD_STRUC *) pTxRing->Cell[TxIdx].AllocVa;
#endif /* RT_BIG_ENDIAN */
if (!pTxD->DMADONE)
{
#ifdef RT_BIG_ENDIAN
pDestTxWI = (TXWI_STRUC *) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
NdisMoveMemory((PUCHAR)&TxWI, (PUCHAR)pDestTxWI, TXWISize);
pTxWI = &TxWI;
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
#else
pTxWI = (TXWI_STRUC *)pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
#endif /* RT_BIG_ENDIAN */
if (pTxWI->TXWI_O.wcid == pEntry->wcid)
pTxWI->TXWI_O.ACK = FALSE;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
NdisMoveMemory((PUCHAR)pDestTxWI, (PUCHAR)pTxWI, TXWISize);
#endif /* RT_BIG_ENDIAN */
}
}
}
}
#endif /* RTMP_MAC */
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
PhyMode = pMbss->wdev.PhyMode;
if (pMbss->bHideSsid)
SsidLen = 0;
else
SsidLen = pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pMbss->BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame;
UCHAR *ptr;
ULONG FrameLen;
ULONG UpdatePos;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
MULTISSID_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
UCHAR PhyMode;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
struct wifi_dev *wdev;
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
pComCfg = &pAd->CommonCfg;
pMbss = &pAd->ApCfg.MBSSID[apidx];
wdev = &pMbss->wdev;
pBeaconFrame = (UCHAR *)&pMbss->BeaconBuf[0];
FrameLen = UpdatePos = pMbss->TimIELocationInBeacon;
PhyMode = wdev->PhyMode;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->CapabilityInfoLocationInBeacon;
*ptr = (UCHAR)(pMbss->CapabilityInfo & 0x00ff);
*(ptr+1) = (UCHAR)((pMbss->CapabilityInfo & 0xff00) >> 8);
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
/* move RSN IE from below to here for Ralink Win7 v3.0.0.61 version parse beacon issue. */
/* sync the order with BRCM's AP. */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA) ||
(wdev->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((wdev->AuthMode == Ndis802_11AuthModeWPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
/* Append RSN_IE when WPA OR WPAPSK, */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (wdev->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef HOSTAPD_SUPPORT
if (pMbss->HostapdWPS && (pMbss->WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pMbss->WscIEBeacon.ValueLen, pMbss->WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if ((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
INT tp_len, wb_len = 0;
UCHAR *ch_sw_wrapper;
VHT_TXPWR_ENV_IE txpwr_env;
*ptr = IE_CH_SWITCH_WRAPPER;
ch_sw_wrapper = (UCHAR *)(ptr + 1); // reserve for length
ptr += 2; // skip len
if (pComCfg->RegTransmitSetting.field.BW == BW_40) {
WIDE_BW_CH_SWITCH_ELEMENT wb_info;
*ptr = IE_WIDE_BW_CH_SWITCH;
*(ptr + 1) = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += 2;
NdisZeroMemory(&wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
if (pComCfg->vht_bw == VHT_BW_2040)
wb_info.new_ch_width = 0;
else
wb_info.new_ch_width = 1;
if (pComCfg->vht_bw == VHT_BW_80) {
wb_info.center_freq_1 = vht_cent_ch_freq(pAd, pComCfg->Channel);
wb_info.center_freq_2 = 0;
}
NdisMoveMemory(ptr, &wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
wb_len = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += wb_len;
wb_len += 2;
}
*ptr = IE_VHT_TXPWR_ENV;
NdisZeroMemory(&txpwr_env, sizeof(VHT_TXPWR_ENV_IE));
tp_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
*(ptr + 1) = tp_len;
ptr += 2;
NdisMoveMemory(ptr, &txpwr_env, tp_len);
ptr += tp_len;
tp_len += 2;
*ch_sw_wrapper = wb_len + tp_len;
FrameLen += (2 + wb_len + tp_len);
}
#endif /* DOT11_VHT_AC */
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &pComCfg->HtCapability,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->wdev.DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) &&
(pAd->CommonCfg.Channel > 14))
extCapInfo.operating_mode_notification = 1;
#endif /* DOT11_VHT_AC */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#ifdef WFA_VHT_PF
if (pAd->force_vht_op_mode == TRUE)
{
ULONG TmpLen;
UCHAR operating_ie = IE_OPERATING_MODE_NOTIFY, operating_len = 1;
OPERATING_MODE operating_mode;
operating_mode.rx_nss_type = 0;
operating_mode.rx_nss = (pAd->vht_pf_op_ss - 1);
operating_mode.ch_width = pAd->vht_pf_op_bw;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &operating_ie,
1, &operating_len,
1, &operating_mode,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* WFA_VHT_PF */
/* add WMM IE here */
if (pMbss->wdev.bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->phy_ctrl.FlgQloadEnable != 0)
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
ULONG TmpLen;
UINT8 vht_txpwr_env_ie = IE_VHT_TXPWR_ENV;
UINT8 ie_len;
VHT_TXPWR_ENV_IE txpwr_env;
ie_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &vht_txpwr_env_ie,
1, &ie_len,
ie_len, &txpwr_env,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11_VHT_AC */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (pComCfg->b256QAM_2G && WMODE_2G_ONLY(pComCfg->PhyMode))
RalinkSpecificIe[5] |= 0x8;
#endif /* DOT11_VHT_AC */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, RESERVED_WCID,
FrameLen, PID_MGMT, 0 /*QID_MGMT*/, 0, IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
}
USHORT RtmpPCI_WriteSingleTxResource(
IN PRTMP_ADAPTER pAd,
IN TX_BLK *pTxBlk,
IN BOOLEAN bIsLast,
OUT USHORT *FreeNumber)
{
UCHAR *pDMAHeaderBufVA;
USHORT TxIdx, RetTxIdx;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
UINT32 BufBasePaLow;
PRTMP_TX_RING pTxRing;
USHORT hwHeaderLen;
//
// get Tx Ring Resource
//
pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
// copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
//hwHeaderLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHeaderLen);
pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
//
// build Tx Descriptor
//
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
#endif
NdisZeroMemory(pTxD, TXD_SIZE);
pTxD->SDPtr0 = BufBasePaLow;
pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; // include padding
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = 0;
pTxD->LastSec1 = (bIsLast) ? 1 : 0;
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI);
RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE);
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif // RT_BIG_ENDIAN //
RetTxIdx = TxIdx;
//
// Update Tx index
//
INC_RING_INDEX(TxIdx, TX_RING_SIZE);
pTxRing->TxCpuIdx = TxIdx;
*FreeNumber -= 1;
return RetTxIdx;
}
/* REF: ap_connect.c ApMakeBssBeacon */
BOOLEAN CFG80211DRV_OpsBeaconSet(
VOID *pAdOrg,
VOID *pData,
BOOLEAN isAdd)
{
CFG80211DBG(RT_DEBUG_TRACE, ("80211> CFG80211DRV_OpsBeaconSet ==> %d\n", isAdd));
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdOrg;
CMD_RTPRIV_IOCTL_80211_BEACON *pBeacon;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
HTTRANSMIT_SETTING BeaconTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
BCN_TIME_CFG_STRUC csr9;
UCHAR *ptr;
UINT i;
UINT32 longValue;
UINT8 TXWISize = pAd->chipCap.TXWISize;
UINT32 rx_filter_flag;
BOOLEAN TxPreamble, SpectrumMgmt = FALSE;
BOOLEAN bWmmCapable = FALSE;
UCHAR BBPR1 = 0, BBPR3 = 0;
INT idx;
ULONG offset;
CFG80211DBG(RT_DEBUG_TRACE, ("80211> CFG80211DRV_OpsBeaconSet ==> \n"));
pBeacon = (CMD_RTPRIV_IOCTL_80211_BEACON *)pData;
#ifdef WFD_SUPPORT
if (pAd->StaCfg.WfdCfg.bSuppInsertWfdIe)
{
ULONG TmpLen, WfdIeBitmap;
ptr = pBeacon->beacon + pBeacon->beacon_len;
WfdIeBitmap = (0x1 << SUBID_WFD_DEVICE_INFO) | (0x1 << SUBID_WFD_ASSOCIATED_BSSID) |
(0x1 << SUBID_WFD_COUPLED_SINK_INFO);
WfdMakeWfdIE(pAd, WfdIeBitmap, ptr, &TmpLen);
pBeacon->beacon_len += TmpLen;
}
#endif /* WFD_SUPPORT */
if (isAdd)
{
rx_filter_flag = APNORMAL;
RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag); /* enable RX of DMA block */
pAd->ApCfg.BssidNum = 1;
pAd->MacTab.MsduLifeTime = 20; /* default 5 seconds */
pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = TRUE;
#ifdef INF_AMAZON_SE
printk("YF DEBUG: INF_AMAZON_SE\n");
for (i = 0; i < NUM_OF_TX_RING; i++)
{
pAd->BulkOutDataSizeLimit[i]=24576;
}
#endif /* INF_AMAZON_SE */
AsicDisableSync(pAd);
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
{
if (pAd->CommonCfg.Channel > 14)
pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11AN_MIXED;
else
pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11BGN_MIXED;
}
else
{
if (pAd->CommonCfg.Channel > 14)
pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11A;
else
pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11BG_MIXED;
}
TxPreamble = (pAd->CommonCfg.TxPreamble == Rt802_11PreambleLong ? 0 : 1);
}
PMULTISSID_STRUCT pMbss = &pAd->ApCfg.MBSSID[MAIN_MBSSID];
const UCHAR *ssid_ie = NULL;
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33))
ssid_ie = cfg80211_find_ie(WLAN_EID_SSID, pBeacon->beacon+36, pBeacon->beacon_len-36);
#endif
NdisZeroMemory(pMbss->Ssid, pMbss->SsidLen);
if (ssid_ie == NULL)
{
printk("YF Debug: SSID Not Found In Packet\n");
NdisMoveMemory(pMbss->Ssid, "P2P_Linux_AP", 12);
pMbss->SsidLen = 12;
}
else
{
pMbss->SsidLen = ssid_ie[1];
NdisCopyMemory(pMbss->Ssid, ssid_ie+2, pMbss->SsidLen);
printk("YF Debug: SSID: %s, %d\n", pMbss->Ssid, pMbss->SsidLen);
}
if (isAdd)
{
//if (pMbss->bWmmCapable)
//{
bWmmCapable = FALSE;
pMbss->bWmmCapable = FALSE;
//}
pMbss->MSSIDDev = pAd->net_dev;
COPY_MAC_ADDR(pMbss->Bssid, pAd->CurrentAddress);
printk("AP BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", PRINT_MAC(pAd->CurrentAddress));
/* GO always use WPA2PSK / AES */
pMbss->AuthMode = Ndis802_11AuthModeWPA2PSK;
pMbss->WepStatus = Ndis802_11Encryption3Enabled;
pMbss->WscSecurityMode = WPA2PSKAES;
pMbss->GroupKeyWepStatus = pMbss->WepStatus;
pMbss->CapabilityInfo =
CAP_GENERATE(1, 0, (pMbss->WepStatus != Ndis802_11EncryptionDisabled), TxPreamble, pAd->CommonCfg.bUseShortSlotTime, SpectrumMgmt);
RTMPMakeRSNIE(pAd, Ndis802_11AuthModeWPA2PSK, Ndis802_11Encryption3Enabled, MAIN_MBSSID);
#ifdef DOT11_N_SUPPORT
RTMPSetPhyMode(pAd, pAd->CommonCfg.PhyMode);
SetCommonHT(pAd);
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pAd->Antenna.field.TxPath == 2))
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
BBPR1 &= (~0x18);
BBPR1 |= 0x10;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BBPR1);
}
else
#endif /* DOT11_N_SUPPORT */
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
BBPR1 &= (~0x18);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BBPR1);
}
/* Receiver Antenna selection, write to BBP R3(bit4:3) */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
BBPR3 &= (~0x18);
if(pAd->Antenna.field.RxPath == 3)
{
BBPR3 |= (0x10);
}
else if(pAd->Antenna.field.RxPath == 2)
{
BBPR3 |= (0x8);
}
else if(pAd->Antenna.field.RxPath == 1)
{
BBPR3 |= (0x0);
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
if(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
{
if ((pAd->CommonCfg.PhyMode > PHY_11G) || bWmmCapable)
{
/* EDCA parameters used for AP's own transmission */
pAd->CommonCfg.APEdcaParm.bValid = TRUE;
pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6;
pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10;
pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
pAd->CommonCfg.APEdcaParm.Txop[0] = 0;
pAd->CommonCfg.APEdcaParm.Txop[1] = 0;
pAd->CommonCfg.APEdcaParm.Txop[2] = 94; /*96; */
pAd->CommonCfg.APEdcaParm.Txop[3] = 47; /*48; */
AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
/* EDCA parameters to be annouced in outgoing BEACON, used by WMM STA */
pAd->ApCfg.BssEdcaParm.bValid = TRUE;
pAd->ApCfg.BssEdcaParm.Aifsn[0] = 3;
pAd->ApCfg.BssEdcaParm.Aifsn[1] = 7;
pAd->ApCfg.BssEdcaParm.Aifsn[2] = 2;
pAd->ApCfg.BssEdcaParm.Aifsn[3] = 2;
pAd->ApCfg.BssEdcaParm.Cwmin[0] = 4;
pAd->ApCfg.BssEdcaParm.Cwmin[1] = 4;
pAd->ApCfg.BssEdcaParm.Cwmin[2] = 3;
pAd->ApCfg.BssEdcaParm.Cwmin[3] = 2;
pAd->ApCfg.BssEdcaParm.Cwmax[0] = 10;
pAd->ApCfg.BssEdcaParm.Cwmax[1] = 10;
pAd->ApCfg.BssEdcaParm.Cwmax[2] = 4;
pAd->ApCfg.BssEdcaParm.Cwmax[3] = 3;
pAd->ApCfg.BssEdcaParm.Txop[0] = 0;
pAd->ApCfg.BssEdcaParm.Txop[1] = 0;
pAd->ApCfg.BssEdcaParm.Txop[2] = 94; /*96; */
pAd->ApCfg.BssEdcaParm.Txop[3] = 47; /*48; */
}
else
{
AsicSetEdcaParm(pAd, NULL);
}
}
#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED)
{
/* Patch UI */
pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = BW_20;
}
/* init */
if (pAd->CommonCfg.bRdg)
{
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RDG_ACTIVE);
AsicEnableRDG(pAd);
}
else
{
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RDG_ACTIVE);
AsicDisableRDG(pAd);
}
#endif /* DOT11_N_SUPPORT */
//AsicSetBssid(pAd, pAd->CurrentAddress);
AsicSetMcastWC(pAd);
/* In AP mode, First WCID Table in ASIC will never be used. To prevent it's 0xff-ff-ff-ff-ff-ff, Write 0 here. */
/* p.s ASIC use all 0xff as termination of WCID table search. */
RTMP_IO_WRITE32(pAd, MAC_WCID_BASE, 0x00);
RTMP_IO_WRITE32(pAd, MAC_WCID_BASE+4, 0x0);
/* reset WCID table */
for (idx=2; idx<255; idx++)
{
offset = MAC_WCID_BASE + (idx * HW_WCID_ENTRY_SIZE);
RTMP_IO_WRITE32(pAd, offset, 0x0);
RTMP_IO_WRITE32(pAd, offset+4, 0x0);
}
pAd->MacTab.Content[0].Addr[0] = 0x01;
pAd->MacTab.Content[0].HTPhyMode.field.MODE = MODE_OFDM;
pAd->MacTab.Content[0].HTPhyMode.field.MCS = 3;
AsicBBPAdjust(pAd);
//MlmeSetTxPreamble(pAd, (USHORT)pAd->CommonCfg.TxPreamble);
{
ULONG Addr4;
UINT32 regValue;
PUCHAR pP2PBssid = &pAd->CurrentAddress[0];
Addr4 = (ULONG)(pP2PBssid[0]) |
(ULONG)(pP2PBssid[1] << 8) |
(ULONG)(pP2PBssid[2] << 16) |
(ULONG)(pP2PBssid[3] << 24);
RTMP_IO_WRITE32(pAd, MAC_BSSID_DW0, Addr4);
Addr4 = 0;
Addr4 = (ULONG)(pP2PBssid[4]) | (ULONG)(pP2PBssid[5] << 8);
RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, Addr4);
RTMP_IO_READ32(pAd, MAC_BSSID_DW1, ®Value);
regValue &= 0x0000FFFF;
regValue |= (1 << 16);
if (pAd->chipCap.MBSSIDMode == MBSSID_MODE1)
regValue |= (1 << 21);
RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, regValue);
}
#ifdef RTMP_MAC_USB
printk("YF DEBUG: RTUSBBssBeaconInit\n");
RTUSBBssBeaconInit(pAd);
#endif /* RTMP_MAC_USB */
}
UCHAR apcliIdx, apidx = MAIN_MBSSID;
//pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11BGN_MIXED;
printk("YF DEBUG: Beacon Len %d\n", pBeacon->beacon_len);
printk("YF DEBUG: Beacon Interval %d\n", pBeacon->interval);
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
pBeacon->beacon_len, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
for (i=0; i<TXWISize; i+=4) /* 16-byte TXWI field */
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[0] + i, longValue);
ptr += 4;
}
/* update BEACON frame content. start right after the 16-byte TXWI field. */
ptr = pBeacon->beacon;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
for (i= 0; i< pBeacon->beacon_len; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[0] + TXWISize + i, longValue);
ptr += 4;
}
if (isAdd)
{
/* Enable Bss Sync*/
RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr9.word);
csr9.field.BeaconInterval = (pBeacon->interval) << 4; /* ASIC register in units of 1/16 TU*/
csr9.field.bTsfTicking = 1;
csr9.field.TsfSyncMode = 3;
csr9.field.bTBTTEnable = 1;
csr9.field.bBeaconGen = 1;
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
pAd->P2pCfg.bSentProbeRSP = TRUE;
#ifdef RTMP_MAC_USB
/*
* Support multiple BulkIn IRP,
* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
*/
UCHAR num_idx;
for(num_idx=0; num_idx < pAd->CommonCfg.NumOfBulkInIRP; num_idx++)
{
RTUSBBulkReceive(pAd);
printk("RTUSBBulkReceive!\n" );
}
#endif /* RTMP_MAC_USB */
}
#ifdef WFD_SUPPORT
pAd->StaCfg.WfdCfg.bSuppGoOn = TRUE;
#endif /* WFD_SUPPORT */
return TRUE;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;//, TimLen = 4,
//BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen;
// UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue;
HTTRANSMIT_SETTING BeaconTransmit; // MGMT frame PHY rate setting when operatin at Ht rate.
UCHAR PhyMode, SupRateLen;
#ifdef SPECIFIC_BCN_BUF_SUPPORT
unsigned long irqFlag = 0;
#endif // SPECIFIC_BCN_BUF_SUPPORT //
BOOLEAN bHasWpsIE = FALSE;
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR, pAd->ApCfg.MBSSID[apidx].Bssid);
// for update framelen to TxWI later.
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == PHY_11B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != PHY_11B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
// add country IE, power constraint IE
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
// prepare channel information
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif // EXT_BUILD_CHANNEL_LIST //
// need to do the padding bit check, and concatenate it
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}
#ifdef DOT11_N_SUPPORT
// AP Channel Report
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
// 802.11n D2.0 Annex J
// USA
// regulatory class 32, channel set 1~7
// regulatory class 33, channel set 5-11
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; //sizeof(rclass32);
if (PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif // DOT11_N_SUPPORT //
#ifdef WSC_AP_SUPPORT
// add Simple Config Information Element
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen)))
{
bHasWpsIE = TRUE;
}
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif // DOT1X_SUPPORT //
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif // WSC_AP_SUPPORT //
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
//
// step 6. move BEACON TXD and frame content to on-chip memory
//
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (higher 8KB shared memory)
*/
if (pAd->BcnCB.bHighShareMemSupport == 1)
RTMP_MAC_SHR_MSEL_LOCK(pAd, HIGHER_SHRMEM, irqFlag);
#endif // SPECIFIC_BCN_BUF_SUPPORT //
for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + i, longValue);
ptr += 4;
}
// update BEACON frame content. start right after the 16-byte TXWI field.
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWI_SIZE + i, longValue);
ptr += 4;
}
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (lower 16KB shared memory)
*/
if (pAd->BcnCB.bHighShareMemSupport == 1)
RTMP_MAC_SHR_MSEL_UNLOCK(pAd, LOWER_SHRMEM, irqFlag);
#endif // SPECIFIC_BCN_BUF_SUPPORT //
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Setup Frame format.
NOTE:
This routine should only be used in ATE mode.
==========================================================================
*/
INT ATESetUpFrame(
IN PRTMP_ADAPTER pAd,
IN UINT32 TxIdx)
{
PATE_INFO pATEInfo = &(pAd->ate);
UINT pos = 0;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
PNDIS_PACKET pPacket=NULL;
PUCHAR pDest=NULL;
PVOID AllocVa=NULL;
NDIS_PHYSICAL_ADDRESS AllocPa;
HTTRANSMIT_SETTING TxHTPhyMode;
PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE];
PTXWI_STRUC pTxWI = (PTXWI_STRUC) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
PUCHAR pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
UINT8 TXWISize = pAd->chipCap.TXWISize;
#ifdef RALINK_QA
PHEADER_802_11 pHeader80211;
#endif /* RALINK_QA */
/* fill TxWI */
TxHTPhyMode.field.BW = pATEInfo->TxWI.BW;
TxHTPhyMode.field.ShortGI = pATEInfo->TxWI.ShortGI;
TxHTPhyMode.field.STBC = pATEInfo->TxWI.STBC;
TxHTPhyMode.field.MCS = pATEInfo->TxWI.MCS;
TxHTPhyMode.field.MODE = pATEInfo->TxWI.PHYMODE;
if (pATEInfo->bQATxStart == TRUE)
{
/* always use QID_AC_BE and FIFO_EDCA */
ATEWriteTxWI(pAd, pTxWI, pATEInfo->TxWI.FRAG, pATEInfo->TxWI.CFACK,
pATEInfo->TxWI.TS, pATEInfo->TxWI.AMPDU, pATEInfo->TxWI.ACK,
pATEInfo->TxWI.NSEQ, pATEInfo->TxWI.BAWinSize, 0,
pATEInfo->TxWI.MPDUtotalByteCount, pATEInfo->TxWI.PacketId, 0, 0,
pATEInfo->TxWI.txop/*IFS_HTTXOP*/, pATEInfo->TxWI.CFACK/*FALSE*/,
&TxHTPhyMode);
#ifdef TXBF_SUPPORT
if (IS_RT2883(pAd) || IS_RT3883(pAd))
{
/* Must copy rsv bits to actual TxWI */
pTxWI->rsv = pATEInfo->TxWI.rsv;
pTxWI->iTxBF = pATEInfo->TxWI.iTxBF;
pTxWI->Sounding = pATEInfo->TxWI.Sounding;
pTxWI->eTxBF = pATEInfo->TxWI.eTxBF;
pTxWI->Autofallback = pATEInfo->TxWI.Autofallback;
pTxWI->NDPSndBW = pATEInfo->TxWI.NDPSndBW;
pTxWI->NDPSndRate = pATEInfo->TxWI.NDPSndRate;
}
#endif /* TXBF_SUPPORT */
}
else
{
ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE,
4, 0, pATEInfo->TxLength, 0, 0, 0, IFS_HTTXOP, FALSE, &TxHTPhyMode);
#ifdef TXBF_SUPPORT
if (pATEInfo->bTxBF == 1)
{
if (IS_RT2883(pAd) || IS_RT3883(pAd))
{
pTxWI->rsv = 0;
pTxWI->iTxBF = pATEInfo->TxWI.iTxBF;
pTxWI->Sounding = (pATEInfo->txSoundingMode == 1 ? 1 : 0);
pTxWI->eTxBF = pATEInfo->TxWI.eTxBF;
pTxWI->Autofallback = pATEInfo->TxWI.Autofallback;
pTxWI->NDPSndBW = pATEInfo->TxWI.BW;
if (pATEInfo->txSoundingMode == 3)
pTxWI->NDPSndRate = 2;
else if (pATEInfo->txSoundingMode == 2)
pTxWI->NDPSndRate = 1;
else
pTxWI->NDPSndRate = 0;
}
}
#endif /* TXBF_SUPPORT */
}
/* fill 802.11 header */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
NdisMoveMemory(pDMAHeaderBufVA + TXWISize, pATEInfo->Header, pATEInfo->HLen);
}
else
#endif /* RALINK_QA */
{
pATEInfo->HLen = LENGTH_802_11;
#ifdef TXBF_SUPPORT
TemplateFrame[0] = 0x08; /* Data */
TemplateFrame[1] = 0x00;
if (pATEInfo->bTxBF && pATEInfo->txSoundingMode!=0)
{
/* QoS Data */
pATEInfo->HLen = 32;
TemplateFrame[0] = 0x88;
TemplateFrame[1] = 0x80;
switch (pATEInfo->txSoundingMode)
{
case 1:
/* Data Sounding */
TemplateFrame[28] = pAd->CommonCfg.ETxBfNoncompress? 0x80: 0xc0;
TemplateFrame[29] = 0x00;
break;
case 2:
case 3:
/* 2 or 3 Stream NDP */
TemplateFrame[28] = pAd->CommonCfg.ETxBfNoncompress? 0x80: 0xc0;
TemplateFrame[29] = 0x01; /* NDP Announce */
break;
default:
TemplateFrame[28] = TemplateFrame[29] = 0x0;
}
}
#endif /* TXBF_SUPPORT */
NdisMoveMemory(pDMAHeaderBufVA + TXWISize, TemplateFrame, pATEInfo->HLen);
NdisMoveMemory(pDMAHeaderBufVA + TXWISize + 4, pATEInfo->Addr1, ETH_LENGTH_OF_ADDRESS);
NdisMoveMemory(pDMAHeaderBufVA + TXWISize + 10, pATEInfo->Addr2, ETH_LENGTH_OF_ADDRESS);
NdisMoveMemory(pDMAHeaderBufVA + TXWISize + 16, pATEInfo->Addr3, ETH_LENGTH_OF_ADDRESS);
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA) + TXWISize), DIR_READ, FALSE);
#endif /* RT_BIG_ENDIAN */
/* alloc buffer for payload */
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
pPacket = RTMP_AllocateRxPacketBuffer(pAd, ((POS_COOKIE)(pAd->OS_Cookie))->pci_dev,
pATEInfo->DLen + 0x100, FALSE, &AllocVa, &AllocPa);
}
else
#endif /* RALINK_QA */
{
pPacket = RTMP_AllocateRxPacketBuffer(pAd, ((POS_COOKIE)(pAd->OS_Cookie))->pci_dev,
pATEInfo->TxLength, FALSE, &AllocVa, &AllocPa);
}
if (pPacket == NULL)
{
pATEInfo->TxCount = 0;
DBGPRINT_ERR(("%s : fail to alloc packet space.\n", __FUNCTION__));
return -1;
}
pTxRing->Cell[TxIdx].pNextNdisPacket = pPacket;
pDest = (PUCHAR) AllocVa;
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
GET_OS_PKT_LEN(pPacket) = pATEInfo->DLen;
#ifndef LINUX
GET_OS_PKT_TOTAL_LEN(pPacket) = pATEInfo->DLen;
#endif /* LIMUX */
}
else
#endif /* RALINK_QA */
{
GET_OS_PKT_LEN(pPacket) = pATEInfo->TxLength - LENGTH_802_11;
#ifndef LINUX
GET_OS_PKT_TOTAL_LEN(pPacket) = pATEInfo->TxLength - LENGTH_802_11;
#endif /* LINUX */
}
/* prepare frame payload */
#ifdef RALINK_QA
if ((pATEInfo->bQATxStart == TRUE) && (pATEInfo->DLen != 0))
{
/* copy pattern to payload */
if ((pATEInfo->PLen != 0))
{
for (pos = 0; pos < pATEInfo->DLen; pos += pATEInfo->PLen)
{
memcpy(GET_OS_PKT_DATAPTR(pPacket) + pos, pATEInfo->Pattern, pATEInfo->PLen);
}
}
}
else
#endif /* RALINK_QA */
{
for (pos = 0; pos < GET_OS_PKT_LEN(pPacket); pos++)
{
/* default payload is 0xA5 */
pDest[pos] = pATEInfo->Payload;
}
}
/* build Tx descriptor */
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC)pTxRing->Cell[TxIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
#endif /* !RT_BIG_ENDIAN */
#ifdef RALINK_QA
if (pATEInfo->bQATxStart == TRUE)
{
/* prepare TxD */
NdisZeroMemory(pTxD, TXD_SIZE);
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
/* build Tx descriptor */
pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
pTxD->SDLen0 = TXWISize + pATEInfo->HLen;
pTxD->SDPtr1 = AllocPa;
pTxD->SDLen1 = GET_OS_PKT_LEN(pPacket);
pTxD->LastSec0 = (pTxD->SDLen1 == 0) ? 1 : 0;
pTxD->LastSec1 = 1;
pDest = (PUCHAR)pTxWI;
pDest += TXWISize;
pHeader80211 = (PHEADER_802_11)pDest;
/* modify sequence number... */
if (pATEInfo->TxDoneCount == 0)
pATEInfo->seq = pHeader80211->Sequence;
else
pHeader80211->Sequence = ++pATEInfo->seq;
}
else
#endif /* RALINK_QA */
{
NdisZeroMemory(pTxD, TXD_SIZE);
RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
/* build Tx descriptor */
pTxD->SDPtr0 = RTMP_GetPhysicalAddressLow (pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
pTxD->SDLen0 = TXWISize + LENGTH_802_11;
pTxD->LastSec0 = 0;
pTxD->SDPtr1 = AllocPa;
pTxD->SDLen1 = GET_OS_PKT_LEN(pPacket);
pTxD->LastSec1 = 1;
}
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
RTMPFrameEndianChange(pAd, (((PUCHAR)pDMAHeaderBufVA) + TXWISize), DIR_WRITE, FALSE);
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif /* RT_BIG_ENDIAN */
return 0;
}
VOID RTUSBBulkOutDataPacket(
IN PRTMP_ADAPTER pAd,
IN UCHAR BulkOutPipeId,
IN UCHAR Index)
{
PHT_TX_CONTEXT pHTTXContext;
PURB pUrb;
int ret = 0;
PTXINFO_STRUC pTxInfo, pLastTxInfo = NULL;
PTXWI_STRUC pTxWI;
ULONG TmpBulkEndPos, ThisBulkSize;
unsigned long IrqFlags = 0, IrqFlags2 = 0;
PUCHAR pWirelessPkt, pAppendant;
#ifdef USB_BULK_BUF_ALIGMENT
BOOLEAN bLasAlignmentsectiontRound = FALSE;
#else
BOOLEAN bTxQLastRound = FALSE;
UCHAR allzero[4]= {0x0,0x0,0x0,0x0};
#endif /* USB_BULK_BUF_ALIGMENT */
BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
if ((pAd->BulkOutPending[BulkOutPipeId] == TRUE) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX))
{
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
return;
}
pAd->BulkOutPending[BulkOutPipeId] = TRUE;
if (((!OPSTATUS_TEST_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED)) &&
( !OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)))
)
{
pAd->BulkOutPending[BulkOutPipeId] = FALSE;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
return;
}
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pHTTXContext = &(pAd->TxContext[BulkOutPipeId]);
BULK_OUT_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
#ifdef USB_BULK_BUF_ALIGMENT
if ( (pHTTXContext->NextBulkIdx != pHTTXContext->CurtBulkIdx)
|| ((pHTTXContext->CurWriteRealPos > pHTTXContext->CurWritePosition) &&(pHTTXContext->NextBulkIdx == pHTTXContext->CurWriteIdx))
|| ((pHTTXContext->CurWriteRealPos == 0) && (pHTTXContext->NextBulkIdx == pHTTXContext->CurWriteIdx))
)
#else
if ((pHTTXContext->ENextBulkOutPosition == pHTTXContext->CurWritePosition)
|| ((pHTTXContext->ENextBulkOutPosition-8) == pHTTXContext->CurWritePosition))
#endif /* USB_BULK_BUF_ALIGMENT */
/* druing writing. */
{
BULK_OUT_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pAd->BulkOutPending[BulkOutPipeId] = FALSE;
/* Clear Data flag*/
RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId));
RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
return;
}
/* Clear Data flag*/
RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId));
RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
/*DBGPRINT(RT_DEBUG_TRACE,("BulkOut-B:I=0x%lx, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", in_interrupt(), */
/* pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, */
/* pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));*/
pHTTXContext->NextBulkOutPosition = pHTTXContext->ENextBulkOutPosition;
ThisBulkSize = 0;
TmpBulkEndPos = pHTTXContext->NextBulkOutPosition;
#ifdef USB_BULK_BUF_ALIGMENT
INT idx;
idx = pHTTXContext->NextBulkIdx;
pWirelessPkt = &pHTTXContext->TransferBuffer[idx]->field.WirelessPacket[0];
#else
pWirelessPkt = &pHTTXContext->TransferBuffer->field.WirelessPacket[0];
#endif /* USB_BULK_BUF_ALIGMENT */
#ifndef USB_BULK_BUF_ALIGMENT
if ((pHTTXContext->bCopySavePad == TRUE))
{
if (RTMPEqualMemory(pHTTXContext->SavedPad, allzero,4))
{
DBGPRINT_RAW(RT_DEBUG_ERROR,("e1, allzero : %x %x %x %x %x %x %x %x \n",
pHTTXContext->SavedPad[0], pHTTXContext->SavedPad[1], pHTTXContext->SavedPad[2],pHTTXContext->SavedPad[3]
,pHTTXContext->SavedPad[4], pHTTXContext->SavedPad[5], pHTTXContext->SavedPad[6],pHTTXContext->SavedPad[7]));
}
NdisMoveMemory(&pWirelessPkt[TmpBulkEndPos], pHTTXContext->SavedPad, 8);
pHTTXContext->bCopySavePad = FALSE;
if (pAd->bForcePrintTX == TRUE)
DBGPRINT(RT_DEBUG_TRACE,("RTUSBBulkOutDataPacket --> COPY PAD. CurWrite = %ld, NextBulk = %ld. ENextBulk = %ld.\n", pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition));
}
#endif /* USB_BULK_BUF_ALIGMENT */
do
{
pTxInfo = (PTXINFO_STRUC)&pWirelessPkt[TmpBulkEndPos];
pTxWI = (PTXWI_STRUC)&pWirelessPkt[TmpBulkEndPos + TXINFO_SIZE];
if (pAd->bForcePrintTX == TRUE)
DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkOutDataPacket AMPDU = %d.\n", pTxWI->AMPDU));
/* add by Iverson, limit BulkOut size to 4k to pass WMM b mode 2T1R test items*/
/*if ((ThisBulkSize != 0) && (pTxWI->AMPDU == 0))*/
if ((ThisBulkSize != 0) && (pTxWI->PHYMODE == MODE_CCK))
{
#ifdef INF_AMAZON_SE
/*Iverson Add for AMAZON USB (RT2070 && RT3070) to pass WMM A2-T4 ~ A2-T10*/
if(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
{
/*Iverson patch for WMM A5-T07 ,WirelessStaToWirelessSta do not bulk out aggregate*/
if(pTxWI->PacketId == 6)
{
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
break;
}
else if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&pAd->BulkOutDataSizeLimit[BulkOutPipeId]) == pAd->BulkOutDataSizeLimit[BulkOutPipeId]))
{
/*printk("===Bulkout size limit :%d ===\n",MaxBulkOutSize);*/
/*DBGPRINT(RT_DEBUG_TRACE,("b mode BulkOutPipeId %d pAd->BulkOutDataSizeLimit[BulkOutPipeId] %d \n",BulkOutPipeId,pAd->BulkOutDataSizeLimit[BulkOutPipeId]));*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
break;
}
}
else if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&0x1000) == 0x1000))
{
/* Limit BulkOut size to about 4k bytes.*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
break;
}
#endif /* INF_AMAZON_SE */
#ifndef INF_AMAZON_SE
#ifndef USB_BULK_BUF_ALIGMENT
if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&0x1000) == 0x1000))
{
/* Limit BulkOut size to about 4k bytes.*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
break;
}
#else
if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&BULKOUT_SIZE) == BULKOUT_SIZE))
{
/* Limit BulkOut size to about 24k bytes.*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
/*
when bulk size is > 6000, it mean that this is the lasttround at this alignmnet section.
*/
bLasAlignmentsectiontRound = TRUE;
break;
}
#endif /* USB_BULK_BUF_ALIGMENT */
#endif /* INF_AMAZON_SE */
#ifndef USB_BULK_BUF_ALIGMENT
else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize&0xfffff800) != 0) ) /*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0))*/)
{
/* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
/* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04.*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
break;
}
#else
else if (((pAd->BulkOutMaxPacketSize < 512) && (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&BULKOUT_SIZE) == BULKOUT_SIZE)) ))
{
/* Limit BulkOut size to about 24k bytes.*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
/*
when bulk size is > 6000, it mean that this is the lasttround at this alignmnet section.
*/
bLasAlignmentsectiontRound = TRUE;
break;
}
#endif /* USB_BULK_BUF_ALIGMENT */
}
/* end Iverson*/
else
{
#ifdef USB_BULK_BUF_ALIGMENT
if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&BULKOUT_SIZE) == BULKOUT_SIZE))
#else
if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&0x6000) == 0x6000))
#endif /* USB_BULK_BUF_ALIGMENT */
{ /* Limit BulkOut size to about 24k bytes.*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
#ifdef USB_BULK_BUF_ALIGMENT
/*
when bulk size is > 0x6000, it mean that this is the lasttround at this alignmnet section.
*/
bLasAlignmentsectiontRound = TRUE;
/* printk("data bulk out bLasAlignmentsectiontRound \n");*/
#endif /* USB_BULK_BUF_ALIGMENT */
break;
}
#ifdef INF_AMAZON_SE
else if (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&pAd->BulkOutDataSizeLimit[BulkOutPipeId]) == pAd->BulkOutDataSizeLimit[BulkOutPipeId]))
{
/*printk("===Bulkout size limit :%d ===\n",ThisBulkSize);*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
break;
}
#endif /* INF_AMAZON_SE */
#ifndef USB_BULK_BUF_ALIGMENT
else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize&0xfffff800) != 0) ) /*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0))*/)
{ /* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
/* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04.*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
break;
}
#else
else if (((pAd->BulkOutMaxPacketSize < 512) && (((ThisBulkSize&0xffff8000) != 0) || ((ThisBulkSize&BULKOUT_SIZE) == BULKOUT_SIZE)) ))
{
/* Limit BulkOut size to about 24k bytes.*/
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
/*
when bulk size is > 6000, it mean that this is the lasttround at this alignmnet section.
*/
bLasAlignmentsectiontRound = TRUE;
break;
}
#endif /* USB_BULK_BUF_ALIGMENT */
}
#ifdef USB_BULK_BUF_ALIGMENT
if ((TmpBulkEndPos == pHTTXContext->CurWritePosition) && (pHTTXContext->NextBulkIdx == pHTTXContext->CurWriteIdx))
#else
if (TmpBulkEndPos == pHTTXContext->CurWritePosition)
#endif /* USB_BULK_BUF_ALIGMENT */
{
pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos;
break;
}
#if !defined(CONFIG_MULTI_CHANNEL) && !defined(DOT11Z_TDLS_SUPPORT)
if (pTxInfo->QSEL != FIFO_EDCA)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s(): ====> pTxInfo->QueueSel(%d)!= FIFO_EDCA!!!!\n",
__FUNCTION__, pTxInfo->QSEL));
DBGPRINT(RT_DEBUG_ERROR, ("\tCWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n",
pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition,
pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));
hex_dump("Wrong QSel Pkt:", (PUCHAR)&pWirelessPkt[TmpBulkEndPos], (pHTTXContext->CurWritePosition - pHTTXContext->NextBulkOutPosition));
}
#endif /* !defined(CONFIG_MULTI_CHANNEL) && !defined(DOT11Z_TDLS_SUPPORT) */
if (pTxInfo->USBDMATxPktLen <= 8)
{
BULK_OUT_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
DBGPRINT(RT_DEBUG_ERROR /*RT_DEBUG_TRACE*/,("e2, USBDMATxPktLen==0, Size=%ld, bCSPad=%d, CWPos=%ld, NBPos=%ld, CWRPos=%ld!\n",
pHTTXContext->BulkOutSize, pHTTXContext->bCopySavePad, pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition, pHTTXContext->CurWriteRealPos));
{
DBGPRINT_RAW(RT_DEBUG_ERROR /*RT_DEBUG_TRACE*/,("%x %x %x %x %x %x %x %x \n",
pHTTXContext->SavedPad[0], pHTTXContext->SavedPad[1], pHTTXContext->SavedPad[2],pHTTXContext->SavedPad[3]
,pHTTXContext->SavedPad[4], pHTTXContext->SavedPad[5], pHTTXContext->SavedPad[6],pHTTXContext->SavedPad[7]));
}
pAd->bForcePrintTX = TRUE;
BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pAd->BulkOutPending[BulkOutPipeId] = FALSE;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
/*DBGPRINT(RT_DEBUG_LOUD,("Out:pTxInfo->USBDMATxPktLen=%d!\n", pTxInfo->USBDMATxPktLen));*/
return;
}
/* Increase Total transmit byte counter*/
pAd->RalinkCounters.OneSecTransmittedByteCount += pTxWI->MPDUtotalByteCount;
pAd->RalinkCounters.TransmittedByteCount += pTxWI->MPDUtotalByteCount;
pLastTxInfo = pTxInfo;
#if !defined(CONFIG_MULTI_CHANNEL) && !defined(DOT11Z_TDLS_SUPPORT)
/* Make sure we use EDCA QUEUE. */
pTxInfo->QSEL = FIFO_EDCA;
#endif /* !defined(CONFIG_MULTI_CHANNEL) && !defined(DOT11Z_TDLS_SUPPORT) */
ThisBulkSize += (pTxInfo->USBDMATxPktLen+4);
TmpBulkEndPos += (pTxInfo->USBDMATxPktLen+4);
if (TmpBulkEndPos != pHTTXContext->CurWritePosition)
pTxInfo->USBDMANextVLD = 1;
#ifdef USB_BULK_BUF_ALIGMENT
/*
this is for frag packet , because it will finish this section
when ((((pHTTXContext->CurWritePosition + 3906)& 0x00007fff) & 0xffff6000) == 0x00006000)
*/
if (pTxInfo->SwRingUseLastRound == 1)
{
bLasAlignmentsectiontRound = TRUE;
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
#endif /* RT_BIG_ENDIAN */
break;
}
#else
if (pTxInfo->SwRingUseLastRound == 1)
{
if (pHTTXContext->CurWritePosition == 8)
pTxInfo->USBDMANextVLD = 0;
pTxInfo->SwRingUseLastRound = 0;
bTxQLastRound = TRUE;
pHTTXContext->ENextBulkOutPosition = 8;
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
#endif /* RT_BIG_ENDIAN */
break;
}
#endif /* USB_BULK_BUF_ALIGMENT */
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
#endif /* RT_BIG_ENDIAN */
}while (TRUE);
/* adjust the pTxInfo->USBDMANextVLD value of last pTxInfo.*/
if (pLastTxInfo)
{
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pLastTxInfo, TYPE_TXINFO);
#endif /* RT_BIG_ENDIAN */
pLastTxInfo->USBDMANextVLD = 0;
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pLastTxInfo, TYPE_TXINFO);
#endif /* RT_BIG_ENDIAN */
}
/*
We need to copy SavedPad when following condition matched!
1. Not the last round of the TxQueue and
2. any match of following cases:
(1). The End Position of this bulk out is reach to the Currenct Write position and
the TxInfo and related header already write to the CurWritePosition.
=>(ENextBulkOutPosition == CurWritePosition) && (CurWriteRealPos > CurWritePosition)
(2). The EndPosition of the bulk out is not reach to the Current Write Position.
=>(ENextBulkOutPosition != CurWritePosition)
*/
#ifndef USB_BULK_BUF_ALIGMENT
if ((bTxQLastRound == FALSE) &&
(((pHTTXContext->ENextBulkOutPosition == pHTTXContext->CurWritePosition) && (pHTTXContext->CurWriteRealPos > pHTTXContext->CurWritePosition)) ||
(pHTTXContext->ENextBulkOutPosition != pHTTXContext->CurWritePosition))
)
{
NdisMoveMemory(pHTTXContext->SavedPad, &pWirelessPkt[pHTTXContext->ENextBulkOutPosition], 8);
pHTTXContext->bCopySavePad = TRUE;
if (RTMPEqualMemory(pHTTXContext->SavedPad, allzero,4))
{
PUCHAR pBuf = &pHTTXContext->SavedPad[0];
DBGPRINT_RAW(RT_DEBUG_ERROR,("WARNING-Zero-3:%02x%02x%02x%02x%02x%02x%02x%02x,CWPos=%ld, CWRPos=%ld, bCW=%d, NBPos=%ld, TBPos=%ld, TBSize=%ld\n",
pBuf[0], pBuf[1], pBuf[2],pBuf[3],pBuf[4], pBuf[5], pBuf[6],pBuf[7], pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos,
pHTTXContext->bCurWriting, pHTTXContext->NextBulkOutPosition, TmpBulkEndPos, ThisBulkSize));
pBuf = &pWirelessPkt[pHTTXContext->CurWritePosition];
DBGPRINT_RAW(RT_DEBUG_ERROR,("\tCWPos=%02x%02x%02x%02x%02x%02x%02x%02x\n", pBuf[0], pBuf[1], pBuf[2],pBuf[3],pBuf[4], pBuf[5], pBuf[6],pBuf[7]));
}
/*DBGPRINT(RT_DEBUG_LOUD,("ENPos==CWPos=%ld, CWRPos=%ld, bCSPad=%d!\n", pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->bCopySavePad));*/
}
#endif /* USB_BULK_BUF_ALIGMENT */
if (pAd->bForcePrintTX == TRUE)
DBGPRINT(RT_DEBUG_TRACE,("BulkOut-A:Size=%ld, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", ThisBulkSize, pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));
/*DBGPRINT(RT_DEBUG_LOUD,("BulkOut-A:Size=%ld, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d, bLRound=%d!\n", ThisBulkSize, pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad, bTxQLastRound));*/
/* USB DMA engine requires to pad extra 4 bytes. This pad doesn't count into real bulkoutsize.*/
pAppendant = &pWirelessPkt[TmpBulkEndPos];
NdisZeroMemory(pAppendant, 8);
ThisBulkSize += 4;
pHTTXContext->LastOne = TRUE;
pHTTXContext->BulkOutSize = ThisBulkSize;
#ifdef USB_BULK_BUF_ALIGMENT
/*
if it is the last alignment section round,that we just need to add nextbulkindex,
otherwise we both need to add nextbulkindex and CurWriteIdx
(because when alignment section round happened, the CurWriteIdx is added at function writing resource.)
*/
if(bLasAlignmentsectiontRound == TRUE)
{
CUR_WRITE_IDX_INC(pHTTXContext->NextBulkIdx, BUF_ALIGMENT_RINGSIZE);
pHTTXContext->ENextBulkOutPosition = 0;
}
else
{
CUR_WRITE_IDX_INC(pHTTXContext->NextBulkIdx, BUF_ALIGMENT_RINGSIZE);
pHTTXContext->ENextBulkOutPosition = 0;
CUR_WRITE_IDX_INC(pHTTXContext->CurWriteIdx, BUF_ALIGMENT_RINGSIZE);
pHTTXContext->CurWritePosition = 0;
}
#endif /* USB_BULK_BUF_ALIGMENT */
pAd->watchDogTxPendingCnt[BulkOutPipeId] = 1;
BULK_OUT_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
/* Init Tx context descriptor*/
RTUSBInitHTTxDesc(pAd, pHTTXContext, BulkOutPipeId, ThisBulkSize, (usb_complete_t)RtmpUsbBulkOutDataPacketComplete);
#ifdef USB_BULK_BUF_ALIGMENT
pUrb = pHTTXContext->pUrb[pHTTXContext->CurtBulkIdx];
#else
pUrb = pHTTXContext->pUrb;
#endif /* USB_BULK_BUF_ALIGMENT */
if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
{
DBGPRINT(RT_DEBUG_ERROR, ("RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pAd->BulkOutPending[BulkOutPipeId] = FALSE;
pAd->watchDogTxPendingCnt[BulkOutPipeId] = 0;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
return;
}
BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pHTTXContext->IRPPending = TRUE;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pAd->BulkOutReq++;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;//, TimLen = 4,
//BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen;
// UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit; // MGMT frame PHY rate setting when operatin at Ht rate.
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR, pAd->ApCfg.MBSSID[apidx].Bssid);
// for update framelen to TxWI later.
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &pAd->CommonCfg.SupRateLen,
pAd->CommonCfg.SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if (pAd->CommonCfg.ExtRateLen)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
// add country IE, power constraint IE
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
// prepare channel information
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif // EXT_BUILD_CHANNEL_LIST //
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx)
&& (pAd->CommonCfg.RegulatoryClass[0] != 0))
{
TmpLen2 = 0;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
RguClass_BuildBcnChList(pAd, TmpFrame, &TmpLen2);
}
#endif // DOT11K_RRM_SUPPORT //
// need to do the padding bit check, and concatenate it
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx))
{
InsertTpcReportIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
RTMP_GetTxPwr(pAd, pAd->CommonCfg.MlmeTransmit), 0);
RRM_InsertRRMEnCapIE(pAd, pBeaconFrame+FrameLen, &FrameLen, apidx);
}
#endif // DOT11K_RRM_SUPPORT //
#ifdef DOT11_N_SUPPORT
// AP Channel Report
#ifdef DOT11K_RRM_SUPPORT
for (i=0; i<MAX_NUM_OF_REGULATORY_CLASS; i++)
{
if (pAd->CommonCfg.RegulatoryClass[i] == 0)
break;
InsertChannelRepIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
(PSTRING)pAd->CommonCfg.CountryCode,
pAd->CommonCfg.RegulatoryClass[i]);
}
#else
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
// 802.11n D2.0 Annex J
// USA
// regulatory class 32, channel set 1~7
// regulatory class 33, channel set 5-11
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; //sizeof(rclass32);
if (pAd->CommonCfg.PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif
#endif // DOT11_N_SUPPORT //
#ifdef WSC_AP_SUPPORT
// add Simple Config Information Element
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen))
#ifdef HOSTAPD_SUPPORT
|| pAd->ApCfg.HostapdWPS
#endif
)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen, pAd->ApCfg.MBSSID[apidx].WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif // DOT1X_SUPPORT //
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif // WSC_AP_SUPPORT //
#ifdef DOT11R_FT_SUPPORT
/* The Mobility Domain information element (MDIE) is present in Beacon
** frame when dot11FastBssTransitionEnable is set to true. */
if (pAd->ApCfg.MBSSID[apidx].FtCfg.FtCapFlag.Dot11rFtEnable)
{
PFT_CFG pFtCfg = &pAd->ApCfg.MBSSID[apidx].FtCfg;
FT_CAP_AND_POLICY FtCap;
NdisZeroMemory(&FtCap, sizeof(FT_CAP_AND_POLICY));
FtCap.field.FtOverDs = pFtCfg->FtCapFlag.FtOverDs;
FtCap.field.RsrReqCap = pFtCfg->FtCapFlag.RsrReqCap;
FT_InsertMdIE(pAd, pBeaconFrame + FrameLen, &FrameLen,
pFtCfg->FtMdId, FtCap);
}
#endif // DOT11R_FT_SUPPORT //
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
#ifdef RT3593
/*
Shared memory access selection (higher 8KB shared memory)
*/
RTMP_RF33_SHARED_MEM_SELECT(pAd);
#endif // RT3593 //
//
// step 6. move BEACON TXD and frame content to on-chip memory
//
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx];
for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, reg_base + i, longValue);
ptr += 4;
}
// update BEACON frame content. start right after the 16-byte TXWI field.
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWI_SIZE;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, reg_base + i, longValue);
ptr += 4;
}
#ifdef RT3593
/*
Set the beacon offset (higher 8KB shared memory)
Shared memory access selection (lower 8KB shared memory)
*/
RTMP_RF33_SHARED_MEM_DESELECT(pAd);
#endif // RT3593 //
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}