INT WdsVirtualIF_ioctl(
IN PNET_DEV net_dev,
IN OUT VOID *rq,
IN INT cmd)
{
VOID *pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev); /*RTMP_OS_NETDEV_GET_PRIV(pVirtualAd->RtmpDev); */
/* if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) */
if (RTMP_DRIVER_IOCTL_SANITY_CHECK(pAd) != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_TRACE, ("VirtualIF_ioctl(%s)::Network is down!\n", RTMP_OS_NETDEV_GET_DEVNAME(net_dev)));
return -ENETDOWN;
}
return rt28xx_ioctl(net_dev, rq, cmd);
}
/*
========================================================================
Routine Description:
IOCTL to WLAN.
Arguments:
dev_p which WLAN network interface
rq_p command information
cmd command ID
Return Value:
0: IOCTL successfully
otherwise: IOCTL fail
Note:
SIOCETHTOOL 8946 New drivers use this ETHTOOL interface to
report link failure activity.
========================================================================
*/
int ApCli_VirtualIF_Ioctl(
IN PNET_DEV dev_p,
IN OUT VOID *rq_p,
IN int cmd)
{
VOID *pAd;
pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
ASSERT(pAd);
/* if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) */
if (RTMP_DRIVER_IOCTL_SANITY_CHECK(pAd, NULL) != NDIS_STATUS_SUCCESS)
return -ENETDOWN;
/* do real IOCTL */
return (rt28xx_ioctl(dev_p, rq_p, cmd));
} /* End of ApCli_VirtualIF_Ioctl */
/*
========================================================================
Routine Description:
IOCTL to WLAN.
Arguments:
pDev which WLAN network interface
pIoCtrl command information
Command command ID
Return Value:
0: IOCTL successfully
otherwise: IOCTL fail
Note:
SIOCETHTOOL 8946 New drivers use this ETHTOOL interface to
report link failure activity.
========================================================================
*/
INT MBSS_VirtualIF_Ioctl(
IN PNET_DEV pDev,
IN OUT VOID *pIoCtrl,
IN INT Command)
{
VOID *pAd;
pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
ASSERT(pAd);
if (!pAd)
return -EINVAL;
/* if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) */
if (RTMP_DRIVER_IOCTL_SANITY_CHECK(pAd, NULL) != NDIS_STATUS_SUCCESS)
return -ENETDOWN;
return rt28xx_ioctl(pDev, pIoCtrl, Command);
}
/*
========================================================================
Routine Description:
Request to do a scan. If returning zero, the scan request is given
the driver, and will be valid until passed to cfg80211_scan_done().
For scan results, call cfg80211_inform_bss(); you can call this outside
the scan/scan_done bracket too.
Arguments:
pWiphy - Wireless hardware description
pNdev - Network device interface
pRequest - Scan request
Return Value:
0 - success
-x - fail
Note:
For iw utility: scan
struct cfg80211_scan_request {
struct cfg80211_ssid *ssids;
int n_ssids;
struct ieee80211_channel **channels;
u32 n_channels;
const u8 *ie;
size_t ie_len;
* @ssids: SSIDs to scan for (active scan only)
* @n_ssids: number of SSIDs
* @channels: channels to scan on.
* @n_channels: number of channels for each band
* @ie: optional information element(s) to add into Probe Request or %NULL
* @ie_len: length of ie in octets
========================================================================
*/
static int CFG80211_OpsScan(
IN struct wiphy *pWiphy,
IN struct cfg80211_scan_request *pRequest)
{
#ifdef CONFIG_STA_SUPPORT
struct rtmp_adapter *pAd;
CFG80211_CB *pCfg80211_CB;
#ifdef WPA_SUPPLICANT_SUPPORT
struct iw_scan_req IwReq;
union iwreq_data Wreq;
#endif /* WPA_SUPPLICANT_SUPPORT */
struct net_device *pNdev = NULL;
CFG80211DBG(RT_DEBUG_ERROR, ("80211> %s ==>\n", __FUNCTION__));
MAC80211_PAD_GET(pAd, pWiphy);
RTMP_DRIVER_NET_DEV_GET(pAd, &pNdev);
/* sanity check */
if ((pNdev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) &&
(pNdev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC))
{
return -EOPNOTSUPP;
} /* End of if */
if (RTMP_DRIVER_IOCTL_SANITY_CHECK(pAd, NULL) != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_TRACE, ("80211> Network is down!\n"));
return -ENETDOWN;
} /* End of if */
if (RTMP_DRIVER_80211_SCAN(pAd) != NDIS_STATUS_SUCCESS)
return -EBUSY; /* scanning */
/* End of if */
RTMP_DRIVER_80211_CB_GET(pAd, &pCfg80211_CB);
pCfg80211_CB->pCfg80211_ScanReq = pRequest; /* used in scan end */
#ifdef WPA_SUPPLICANT_SUPPORT
memset(&Wreq, 0, sizeof(Wreq));
memset(&IwReq, 0, sizeof(IwReq));
if ((pRequest->ssids != NULL) &&
(sizeof(pRequest->ssids->ssid) <= sizeof(IwReq.essid)))
{
/* use 1st SSID in the requested SSID list */
IwReq.essid_len = pRequest->ssids->ssid_len;
memcpy(IwReq.essid, pRequest->ssids->ssid, sizeof(IwReq.essid));
Wreq.data.flags |= IW_SCAN_THIS_ESSID;
Wreq.data.length = sizeof(struct iw_scan_req);
}
rt_ioctl_siwscan(pNdev, NULL, &Wreq, (char *)&IwReq);
#else
rt_ioctl_siwscan(pNdev, NULL, NULL, NULL);
#endif /* WPA_SUPPLICANT_SUPPORT */
return 0;
#else
return -EOPNOTSUPP;
#endif /* CONFIG_STA_SUPPORT */
} /* End of CFG80211_OpsScan */
int rtusb_fast_probe(VOID *handle, VOID **ppAd, struct usb_interface *intf)
{
VOID *pAd = *ppAd;
VOID *pCookie = NULL;
struct net_device *net_dev;
#if (defined(WOW_SUPPORT) && defined(RTMP_MAC_USB)) || defined(NEW_WOW_SUPPORT)
UCHAR WOWRun;
#endif /* (defined(WOW_SUPPORT) && defined(RTMP_MAC_USB)) || defined(NEW_WOW_SUPPORT) */
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
INT pm_usage_cnt;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
struct usb_device *usb_dev = NULL;
pCookie = RTMPCheckOsCookie(handle, &pAd);
if (pCookie == NULL)
return NDIS_STATUS_FAILURE;
usb_dev = ((POS_COOKIE)pCookie)->pUsb_Dev;
if (USBDevConfigInit(usb_dev, intf, pAd) == FALSE)
{
RTMPFreeAdapter(pAd);
return NDIS_STATUS_FAILURE;
}
RTMP_DRIVER_USB_INIT(pAd, usb_dev, 0);
/* netdevice-related structure set-up */
netdev_sysfs_reinit(&pAd, usb_dev);
if (RTMP_DRIVER_IOCTL_SANITY_CHECK(pAd, NULL) != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_ERROR, ("Driver is not init, ignore %s\n", __func__));
return NDIS_STATUS_SUCCESS;
}
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
pm_usage_cnt = atomic_read(&intf->pm_usage_cnt);
#else
pm_usage_cnt = intf->pm_usage_cnt;
#endif
if(pm_usage_cnt <= 0)
usb_autopm_get_interface(intf);
RTMP_DRIVER_ADAPTER_RT28XX_CMD_RADIO_ON(pAd);
DBGPRINT(RT_DEBUG_ERROR, ("%s(): <=autosuspend\n", __func__));
return NDIS_STATUS_SUCCESS;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#if (defined(WOW_SUPPORT) && defined(RTMP_MAC_USB)) || defined(NEW_WOW_SUPPORT)
RTMP_DRIVER_ADAPTER_RT28XX_WOW_RUNSTATUS(pAd, &WOWRun);
if (WOWRun)
RTMP_DRIVER_ADAPTER_RT28XX_WOW_DISABLE(pAd);
else
#endif /* (defined(WOW_SUPPORT) && defined(RTMP_MAC_USB)) || defined(NEW_WOW_SUPPORT) */
{
DBGPRINT(RT_DEBUG_ERROR, ("%s :radio_on \n", __func__));
RTMP_DRIVER_ADAPTER_RT28XX_CMD_RADIO_ON(pAd);
RTMP_DRIVER_NET_DEV_GET(pAd, &net_dev);
netif_device_attach(net_dev);
netif_start_queue(net_dev);
netif_carrier_on(net_dev);
netif_wake_queue(net_dev);
}
RTMP_DRIVER_USB_RESUME(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("<=%s()\n", __func__));
return NDIS_STATUS_SUCCESS;
}
