//
// R_Subsector
// Determine floor/ceiling planes.
// Add sprites of things in sector.
// Draw one or more line segments.
//
static void R_Subsector(int num)
{
subsector_t *sub = &subsectors[num];
sector_t tempsec; // killough 3/7/98: deep water hack
int floorlightlevel; // killough 3/16/98: set floor lightlevel
int ceilinglightlevel; // killough 4/11/98
int count = sub->numlines;
seg_t *line = &segs[sub->firstline];
frontsector = sub->sector;
// [AM] Interpolate sector movement. Usually only needed
// when you're standing inside the sector.
R_MaybeInterpolateSector(frontsector);
// killough 3/8/98, 4/4/98: Deep water / fake ceiling effect
frontsector = R_FakeFlat(frontsector, &tempsec, &floorlightlevel, &ceilinglightlevel, false);
floorplane = (frontsector->interpfloorheight < viewz // killough 3/7/98
|| (frontsector->heightsec != -1
&& sectors[frontsector->heightsec].ceilingpic == skyflatnum) ?
R_FindPlane(frontsector->interpfloorheight,
(frontsector->floorpic == skyflatnum // killough 10/98
&& (frontsector->sky & PL_SKYFLAT) ? frontsector->sky : frontsector->floorpic),
floorlightlevel, // killough 3/16/98
frontsector->floor_xoffs, // killough 3/7/98
frontsector->floor_yoffs) : NULL);
ceilingplane = (frontsector->interpceilingheight > viewz
|| frontsector->ceilingpic == skyflatnum
|| (frontsector->heightsec != -1
&& sectors[frontsector->heightsec].floorpic == skyflatnum) ?
R_FindPlane(frontsector->interpceilingheight, // killough 3/8/98
(frontsector->ceilingpic == skyflatnum // killough 10/98
&& (frontsector->sky & PL_SKYFLAT) ? frontsector->sky : frontsector->ceilingpic),
ceilinglightlevel, // killough 4/11/98
frontsector->ceiling_xoffs, // killough 3/7/98
frontsector->ceiling_yoffs) : NULL);
// killough 9/18/98: Fix underwater slowdown, by passing real sector
// instead of fake one. Improve sprite lighting by basing sprite
// lightlevels on floor & ceiling lightlevels in the surrounding area.
//
// 10/98 killough:
//
// NOTE: TeamTNT fixed this bug incorrectly, messing up sprite lighting!!!
// That is part of the 242 effect!!! If you simply pass sub->sector to
// the old code you will not get correct lighting for underwater sprites!!!
// Either you must pass the fake sector and handle validcount here, on the
// real sector, or you must account for the lighting in some other way,
// like passing it as an argument.
if (sub->sector->validcount != validcount)
{
sub->sector->validcount = validcount;
R_AddSprites(sub->sector, floorlightlevel);
}
while (count--)
R_AddLine(line++);
}
//
// R_Subsector
// Determine floor/ceiling planes.
// Add sprites of things in sector.
// Draw one or more line segments.
//
void R_Subsector (int num)
{
int count;
seg_t* line;
subsector_t* sub;
#ifdef RANGECHECK
if (num>=numsubsectors)
I_Error ("R_Subsector: ss %i with numss = %i",
num,
numsubsectors);
#endif
sscount++;
sub = &subsectors[num];
frontsector = sub->sector;
count = sub->numlines;
line = &segs[sub->firstline];
// [AM] Interpolate sector movement. Usually only needed
// when you're standing inside the sector.
R_MaybeInterpolateSector(frontsector);
if (frontsector->interpfloorheight < viewz)
{
floorplane = R_FindPlane(frontsector->interpfloorheight,
frontsector->floorpic,
frontsector->lightlevel);
}
else
floorplane = NULL;
if (frontsector->interpceilingheight > viewz
|| frontsector->ceilingpic == skyflatnum)
{
ceilingplane = R_FindPlane(frontsector->interpceilingheight,
frontsector->ceilingpic,
frontsector->lightlevel);
}
else
ceilingplane = NULL;
R_AddSprites (frontsector);
while (count--)
{
R_AddLine (line);
line++;
}
}
//
// R_AddLine
// Clips the given segment
// and adds any visible pieces to the line list.
//
void R_AddLine (seg_t* line)
{
int x1;
int x2;
angle_t angle1;
angle_t angle2;
angle_t span;
angle_t tspan;
curline = line;
// OPTIMIZE: quickly reject orthogonal back sides.
// [crispy] remove slime trails
angle1 = R_PointToAngle (line->v1->px, line->v1->py);
angle2 = R_PointToAngle (line->v2->px, line->v2->py);
// Clip to view edges.
// OPTIMIZE: make constant out of 2*clipangle (FIELDOFVIEW).
span = angle1 - angle2;
// Back side? I.e. backface culling?
if (span >= ANG180)
return;
// Global angle needed by segcalc.
rw_angle1 = angle1;
angle1 -= viewangle;
angle2 -= viewangle;
tspan = angle1 + clipangle;
if (tspan > 2*clipangle)
{
tspan -= 2*clipangle;
// Totally off the left edge?
if (tspan >= span)
return;
angle1 = clipangle;
}
tspan = clipangle - angle2;
if (tspan > 2*clipangle)
{
tspan -= 2*clipangle;
// Totally off the left edge?
if (tspan >= span)
return;
angle2 = -clipangle;
}
// The seg is in the view range,
// but not necessarily visible.
angle1 = (angle1+ANG90)>>ANGLETOFINESHIFT;
angle2 = (angle2+ANG90)>>ANGLETOFINESHIFT;
x1 = viewangletox[angle1];
x2 = viewangletox[angle2];
// Does not cross a pixel?
if (x1 == x2)
return;
backsector = line->backsector;
// Single sided line?
if (!backsector)
goto clipsolid;
// [AM] Interpolate sector movement before
// running clipping tests. Frontsector
// should already be interpolated.
R_MaybeInterpolateSector(backsector);
// Closed door.
if (backsector->interpceilingheight <= frontsector->interpfloorheight
|| backsector->interpfloorheight >= frontsector->interpceilingheight)
goto clipsolid;
// Window.
if (backsector->interpceilingheight != frontsector->interpceilingheight
|| backsector->interpfloorheight != frontsector->interpfloorheight)
goto clippass;
// Reject empty lines used for triggers
// and special events.
// Identical floor and ceiling on both sides,
// identical light levels on both sides,
// and no middle texture.
if (backsector->ceilingpic == frontsector->ceilingpic
&& backsector->floorpic == frontsector->floorpic
&& backsector->lightlevel == frontsector->lightlevel
&& curline->sidedef->midtexture == 0)
{
return;
}
clippass:
R_ClipPassWallSegment (x1, x2-1);
return;
clipsolid:
R_ClipSolidWallSegment (x1, x2-1);
}
//
// R_AddLine
// Clips the given segment
// and adds any visible pieces to the line list.
//
static void R_AddLine(seg_t *line)
{
int x1;
int x2;
angle_t angle1;
angle_t angle2;
angle_t span;
angle_t tspan;
static sector_t tempsec; // killough 3/8/98: ceiling/water hack
curline = line;
angle1 = R_PointToAngleEx(line->v1->x, line->v1->y);
angle2 = R_PointToAngleEx(line->v2->x, line->v2->y);
// Clip to view edges.
span = angle1 - angle2;
// Back side? I.e. backface culling?
if (span >= ANG180)
return;
// Global angle needed by segcalc.
angle1 -= viewangle;
angle2 -= viewangle;
tspan = angle1 + clipangle;
if (tspan > 2 * clipangle)
{
tspan -= 2 * clipangle;
// Totally off the left edge?
if (tspan >= span)
return;
angle1 = clipangle;
}
tspan = clipangle - angle2;
if (tspan > 2 * clipangle)
{
tspan -= 2 * clipangle;
// Totally off the left edge?
if (tspan >= span)
return;
angle2 = 0 - clipangle;
}
// The seg is in the view range,
// but not necessarily visible.
angle1 = (angle1 + ANG90) >> ANGLETOFINESHIFT;
angle2 = (angle2 + ANG90) >> ANGLETOFINESHIFT;
// killough 1/31/98: Here is where "slime trails" can SOMETIMES occur:
x1 = viewangletox[angle1];
x2 = viewangletox[angle2];
// Does not cross a pixel?
if (x1 >= x2)
return;
backsector = line->backsector;
// Single sided line?
if (!backsector)
goto clipsolid;
// [AM] Interpolate sector movement before
// running clipping tests. Frontsector
// should already be interpolated.
R_MaybeInterpolateSector(backsector);
// killough 3/8/98, 4/4/98: hack for invisible ceilings / deep water
backsector = R_FakeFlat(backsector, &tempsec, NULL, NULL, true);
doorclosed = false; // killough 4/16/98
// Closed door.
if (backsector->interpceilingheight <= frontsector->interpfloorheight
|| backsector->interpfloorheight >= frontsector->interpceilingheight)
goto clipsolid;
// This fixes the automap floor height bug -- killough 1/18/98:
// killough 4/7/98: optimize: save result in doorclosed for use in r_segs.c
if ((doorclosed = R_DoorClosed()))
goto clipsolid;
// Window.
if (backsector->interpceilingheight != frontsector->interpceilingheight
|| backsector->interpfloorheight != frontsector->interpfloorheight)
goto clippass;
// Reject empty lines used for triggers
// and special events.
// Identical floor and ceiling on both sides,
// identical light levels on both sides,
// and no middle texture.
if (backsector->ceilingpic == frontsector->ceilingpic
&& backsector->floorpic == frontsector->floorpic
&& backsector->lightlevel == frontsector->lightlevel
&& !curline->sidedef->midtexture
// killough 3/7/98: Take flats offsets into account:
&& backsector->floor_xoffs == frontsector->floor_xoffs
&& backsector->floor_yoffs == frontsector->floor_yoffs
&& backsector->ceiling_xoffs == frontsector->ceiling_xoffs
&& backsector->ceiling_yoffs == frontsector->ceiling_yoffs
// killough 4/16/98: consider altered lighting
&& backsector->floorlightsec == frontsector->floorlightsec
&& backsector->ceilinglightsec == frontsector->ceilinglightsec)
return;
clippass:
R_ClipPassWallSegment(x1, x2 - 1);
return;
clipsolid:
R_ClipSolidWallSegment(x1, x2 - 1);
}
