void Curves2Degs ()
{
// convert rads to degs for IDT_WRAP curves
PCURVE pCurve = _CurveRsc.pCurves;
for (;;)
{
if (pCurve == NULL) break;
if (pCurve->IndexType == IDT_WRAP)
{
pCurve->MinIndex = Rads2Degs (pCurve->MinIndex);
pCurve->MaxIndex = Rads2Degs (pCurve->MaxIndex);
pCurve->DeltaIndex = Rads2Degs (pCurve->DeltaIndex);
ULong n;
for (n=0; n<pCurve->cPoints; n++)
pCurve->CurveData[n].index = Rads2Degs (pCurve->CurveData[n].index);
}
pCurve = pCurve->List.NextItem();
}
}
//컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴
//Procedure DerivativeBase
//Author Andrew McRae
//Date Tue 17 Jun 1997
//
//Description Used to calibrate model with linearized
// stability derivatives
//
// This model is aerodynamically accurate
// for small disturbances from level flight.
//
//Inputs
//
//Returns
//
//------------------------------------------------------------------------------
void Model::DerivativeBase ()
{
/*
Stability Derivatives
Forces X,Y,Z
Moments L,M,N
Velocity u,v,w
Angular Velocity p,q,r
Roll, Pitch, Yaw inputs a,b,c
Downward Acceleration wd (za)
(r = density)
(everything has 0.5)
Forces Moments
Forward Stbd Down Roll Pitch Yaw
Xu rVS Yu ... Zu rVS Lu ... Mu rVSc Nu ...
Xv ... Yv rVS Zv ... Lv rVSb Mv ... Nv rVSb
Xw rVS Yw ... Zw rVS Lw ... Mw rVSc Nw ...
Xp ... Yp rVSb Zp ... Lp rVSb2 Mp ... Np rVSb2
Xq rVSc Yq ... Zq rVSc Lq ... Mq rVSc2 Nq ...
Xr ... Yr rVSb Zr ... Lr rVSb2 Mr ... Nr rVSb2
Xa ... Ya rV2S Za ... La rV2Sb Ma ... Na rV2Sb
Xb rV2S Yb ... Zb rV2S Lb ... Mb rV2Sc Nb ...
Xc ... Yc rV2S Zc ... Lc rV2Sb Mc ... Nc rV2Sb
Xwd rSc Ywd ... Zwd rSc Lwd ... Mwd rSc2 Nwd ...
*/
typedef struct vel { FP u,v,w; } VEL;
typedef struct rotvel { FP p,q,r; } ROTVEL;
typedef struct ctrl { FP a,b,c; } CTRL;
typedef struct acc { FP ud,vd,wd; } ACC;
typedef struct veldervs { VEL X,Y,Z,L,M,N; } VELDERVS;
typedef struct rotveldervs { ROTVEL X,Y,Z,L,M,N; } ROTVELDERVS;
typedef struct ctrldervs { CTRL X,Y,Z,L,M,N; } CTRLDERVS;
typedef struct accdervs { ACC X,Y,Z,L,M,N; } ACCDERVS;
VELDERVS V;
ROTVELDERVS RV;
CTRLDERVS C;
ACCDERVS A;
//DeadCode AMM 24Nov99 MODEL_DT = 3;
MODEL_LOOPS = 1;
static Bool setup = TRUE;
FP testalpha = -Degs2Rads ((FP)Elevator / 3000);
if (testalpha > DEGS2RADS(10)) testalpha = DEGS2RADS(10);
if (testalpha < DEGS2RADS(-10)) testalpha = DEGS2RADS(-10);
if (setup)
{
// temp
Pos.y = FT_3000;
Vel.x = 0;
Vel.y = 0;
Vel.z = 150;
Ori.x.x = 1;
Ori.x.y = 0;
Ori.x.z = 0;
Ori.y.x = 0;
Ori.y.y = 1;
Ori.y.z = 0;
Ori.z.x = 0;
Ori.z.y = 0;
Ori.z.z = 1;
// RotOriXVec (Ori, testalpha);
// RotOriXVec (Ori, DEGS2RADS(5));
RotOriYVec (Ori, DEGS2RADS(10));
RotVel.x = 0;
RotVel.y = 0;
RotVel.z = 0;
RotVel.y = 0.00105; // 1 rpm
RotVel.z = -0.00105;
// temp end
setup = FALSE;
}
// UpdateAirStruc ();
Sky.Ambient (Pos.y, AmbDensity, AmbTemp, AmbPres);
CalcAirVel ();
GearTouched = FALSE;
// Set Mass and Rot Inertia
Mass = 0;
NullVec (RotInertia);
PMODEL pModel = ControlledAC->fly.pModel;
PMASSPOINT pMass = MassList;
while (pMass != NULL)
{
pMass->Process (pModel);
pMass = pMass->List.NextItem ();
}
// ProcessEngines ();
Mass = 617415;
RotInertia.x = 1.49534e10;
RotInertia.y = 3.59877e10;
RotInertia.z = 4.98958e10;
// WORK IN STANDARD UNITS
// Calc Derivative Mutipliers
FP B = (MainPlaneList->Area / MainPlaneList->Chord) * 0.01;
FP Ch = MainPlaneList->Chord * 0.01;
FP rS = 0.5 * (AmbDensity * 10000) * (MainPlaneList->Area * 0.0001);
FP rVS = rS * AirSpeed;
FP rVSb = rVS * B;
FP rVSc = rVS * Ch;
FP rVSb2 = rVSb * B;
FP rVSc2 = rVSc * Ch;
FP rV2S = rVS * AirSpeed;
FP rV2Sb = rV2S * B;
FP rV2Sc = rV2S * Ch;
FP rSc = rS * Ch;
FP rSc2 = rSc * Ch;
// Get derivative inputs
// Velocities
FP u = -AirVel.z;
FP v = -AirVel.x;
FP w = AirVel.y;
// Rotational velocities
FP p = RotVel.z * 100;
FP q = RotVel.x * 100;
FP r = -RotVel.y * 100;
// Calc Control inputs
FP a = -((FP)Aileron * F2PIE * 20) / (32768 * 360);
FP b = ((FP)Elevator * F2PIE * 20) / (32768 * 360);
FP c = -((FP)Rudder * F2PIE * 20) / (32768 * 360);
// Acceleration
FP ud = 0;
FP vd = 0;
FP wd = 0;
// Calc alpha
FP alpha = CalcAngle (VecLen2D (u,v), w);
if (alpha > DEGS2RADS(180)) alpha -= DEGS2RADS(360);
alpha += DEGS2RADS (3);
// alpha = testalpha;
// if (alpha > DEGS2RADS(10)) alpha = DEGS2RADS(10);
// if (alpha < DEGS2RADS(-10)) alpha = DEGS2RADS(-10);
FP Sin = FSin (alpha);
FP Cos = FCos (alpha);
// Calc Cl, Cd
FP Cl = alpha * 5.27;
FP Cd = alpha * 0.29;
#ifdef PRINT_DERV_DATA
PrintVar (30, 16, "alp %.2f ", Rads2Degs(alpha));
PrintVar (45, 16, "Cl %.2f ", Cl);
PrintVar (60, 16, "Cd %.2f ", Cd);
PrintVar (30, 18, "u %.4f ", u);
PrintVar (45, 18, "v %.4f ", v);
PrintVar (60, 18, "w %.4f ", w);
PrintVar (30, 19, "p %.4f ", p);
PrintVar (45, 19, "q %.4f ", q);
PrintVar (60, 19, "r %.4f ", r);
#endif
// Force Velocity dervs
V.X.u = -Cd * u * rVS; V.Y.u = 0 * u * rVS; V.Z.u = -Cl * u * rVS;
V.X.v = 0 * v * rVS; V.Y.v = -0.546 * v * rVS; V.Z.v = 0 * v * rVS;
V.X.w = Cl * w * rVS; V.Y.w = 0 * w * rVS; V.Z.w = -Cd * w * rVS;
// Moment Velocity dervs
V.L.u = 0 * u * rVSb; V.M.u = 0 * u * rVSc; V.N.u = 0 * u * rVSb;
V.L.v = -0.0654 * v * rVSb; V.M.v = 0 * v * rVSc; V.N.v = 0.118 * v * rVSb;
V.L.w = 0 * w * rVSb; V.M.w = -0.44 * w * rVSc; V.N.w = 0 * w * rVSb;
// *****************
// * V.M.w is iffy *
// *****************
// Force RotVel dervs
RV.X.p = 0; RV.Y.p = 0 * p * rVSb; RV.Z.p = 0;
RV.X.q = 0 * q * rVSc; RV.Y.q = 0; RV.Z.q = 0 * q * rVSc;
RV.X.r = 0; RV.Y.r = 0.1435 * r * rVSb; RV.Z.r = 0;
// Moment RotVel dervs
RV.L.p = -0.195 * p * rVSb2; RV.M.p = 0; RV.N.p = -0.008 * p * rVSb2;
RV.L.q = 0; RV.M.q = -0.032 * q * rVSc2; RV.N.q = 0;
RV.L.r = 0.0575 * r * rVSb2; RV.M.r = 0; RV.N.r = -0.067 * r * rVSb2;
// Check M.q (c/2U ?????)
// Force Control dervs
C.X.a = 0; C.Y.a = 0 * a * rV2S; C.Z.a = 0;
C.X.b = 0.43 * Sin * b * rV2S; C.Y.b = 0; C.Z.b = 0.43 * b * Cos * rV2S;
C.X.c = 0; C.Y.c = 0.149 * c * rV2S; C.Z.c = 0;
// Moment Control dervs
C.L.a = -0.114 * a * rV2Sb; C.M.a = 0; C.N.a = 0.009 * a * rV2Sb;
C.L.b = 0; C.M.b = -0.934 * b * rV2Sc; C.N.b = 0;
C.L.c = 0.0057 * c * rV2Sb; C.M.c = 0; C.N.c = -0.069 * c * rV2Sb;
// Z Acc dervs
// use Cm alpha dot in F94A derv tables
#ifdef PRINT_DERV_DATA
PrintVar (30, 0, "V.X.u %.0f ", V.X.u);
PrintVar (45, 0, "V.Y.u %.0f ", V.Y.u);
PrintVar (60, 0, "V.Z.u %.0f ", V.Z.u);
PrintVar (30, 1, "V.X.v %.0f ", V.X.v);
PrintVar (45, 1, "V.Y.v %.0f ", V.Y.v);
PrintVar (60, 1, "V.Z.v %.0f ", V.Z.v);
PrintVar (30, 2, "V.X.w %.0f ", V.X.w);
PrintVar (45, 2, "V.Y.w %.0f ", V.Y.w);
PrintVar (60, 2, "V.Z.w %.0f ", V.Z.w);
PrintVar (30, 4, "V.L.u %.0f ", V.L.u);
PrintVar (45, 4, "V.M.u %.0f ", V.M.u);
PrintVar (60, 4, "V.N.u %.0f ", V.N.u);
PrintVar (30, 5, "V.L.v %.0f ", V.L.v);
PrintVar (45, 5, "V.M.v %.0f ", V.M.v);
PrintVar (60, 5, "V.N.v %.0f ", V.N.v);
PrintVar (30, 6, "V.L.w %.0f ", V.L.w);
PrintVar (45, 6, "V.M.w %.0f ", V.M.w);
PrintVar (60, 6, "V.N.w %.0f ", V.N.w);
PrintVar (30, 8, "RV.X.p %.0f ", RV.X.p);
PrintVar (45, 8, "RV.Y.p %.0f ", RV.Y.p);
PrintVar (60, 8, "RV.Z.p %.0f ", RV.Z.p);
PrintVar (30, 9, "RV.X.q %.0f ", RV.X.q);
PrintVar (45, 9, "RV.Y.q %.0f ", RV.Y.q);
PrintVar (60, 9, "RV.Z.q %.0f ", RV.Z.q);
PrintVar (30, 10, "RV.X.r %.0f ", RV.X.r);
PrintVar (45, 10, "RV.Y.r %.0f ", RV.Y.r);
PrintVar (60, 10, "RV.Z.r %.0f ", RV.Z.r);
PrintVar (30, 12, "RV.L.p %.0f ", RV.L.p);
PrintVar (45, 12, "RV.M.p %.0f ", RV.M.p);
PrintVar (60, 12, "RV.N.p %.0f ", RV.N.p);
PrintVar (30, 13, "RV.L.q %.0f ", RV.L.q);
PrintVar (45, 13, "RV.M.q %.0f ", RV.M.q);
PrintVar (60, 13, "RV.N.q %.0f ", RV.N.q);
PrintVar (30, 14, "RV.L.r %.0f ", RV.L.r);
PrintVar (45, 14, "RV.M.r %.0f ", RV.M.r);
PrintVar (60, 14, "RV.N.r %.0f ", RV.N.r);
#endif
// calc forces
FCRD force;
force.x = V.X.u + V.X.v + V.X.w + RV.X.p + RV.X.q + RV.X.r + C.X.a + C.X.b + C.X.c;
force.y = V.Y.u + V.Y.v + V.Y.w + RV.Y.p + RV.Y.q + RV.Y.r + C.Y.a + C.Y.b + C.Y.c;
force.z = V.Z.u + V.Z.v + V.Z.w + RV.Z.p + RV.Z.q + RV.Z.r + C.Z.a + C.Z.b + C.Z.c;
NettForce.x = force.y;
NettForce.y = -force.z;
NettForce.z = force.x;
// calc moments
FCRD moment;
moment.x = V.L.u + V.L.v + V.L.w + RV.L.p + RV.L.q + RV.L.r + C.L.a + C.L.b + C.L.c;
moment.y = V.M.u + V.M.v + V.M.w + RV.M.p + RV.M.q + RV.M.r + C.M.a + C.M.b + C.M.c;
moment.z = V.N.u + V.N.v + V.N.w + RV.N.p + RV.N.q + RV.N.r + C.N.a + C.N.b + C.N.c;
NettMoment.x = moment.y * 100;
NettMoment.y = -moment.z * 100;
NettMoment.z = moment.x * 100;
// Engines
PTHRUSTPOINT pThrust = ThrustList;
while (pThrust != NULL)
{
pThrust->Process ();
NettForce.x += pThrust->Force.x;
NettForce.y += pThrust->Force.y;
NettForce.z += pThrust->Force.z;
pThrust = pThrust->List.NextItem ();
}
MODLIMIT (NettForce.x, 600000);
MODLIMIT (NettForce.y, 2500000);
MODLIMIT (NettForce.z, 600000);
MODLIMIT (NettMoment.x, 250000000);
MODLIMIT (NettMoment.y, 250000000);
MODLIMIT (NettMoment.z, 250000000);
CalcAcc ();
//TempCode ARM 15Jul97 {
//TempCode ARM 15Jul97 OldAcc.x = Acc.x;
//TempCode ARM 15Jul97 OldAcc.y = Acc.y;
//TempCode ARM 15Jul97 OldAcc.z = Acc.z;
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 Acc.x = (NettForce.x / Mass);
//TempCode ARM 15Jul97 Acc.y = (NettForce.y / Mass);
//TempCode ARM 15Jul97 Acc.z = (NettForce.z / Mass);
//TempCode ARM 15Jul97 }
CalcRotAcc ();
//TempCode ARM 15Jul97 {
//TempCode ARM 15Jul97 OldRotAcc.x = RotAcc.x;
//TempCode ARM 15Jul97 OldRotAcc.y = RotAcc.y;
//TempCode ARM 15Jul97 OldRotAcc.z = RotAcc.z;
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 RotAcc.x = (NettMoment.x / RotInertia.x);
//TempCode ARM 15Jul97 RotAcc.y = (NettMoment.y / RotInertia.y);
//TempCode ARM 15Jul97 RotAcc.z = (NettMoment.z / RotInertia.z);
//TempCode ARM 15Jul97 }
TransInt (ALL);
//TempCode ARM 15Jul97 {
//TempCode ARM 15Jul97 FCRD acc;
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 acc.x = (OldAcc.x + Acc.x) * 0.5;
//TempCode ARM 15Jul97 acc.y = (OldAcc.y + Acc.y) * 0.5;
//TempCode ARM 15Jul97 acc.z = (OldAcc.z + Acc.z) * 0.5;
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 TnsPnt (acc, acc, Ori);
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 OldVel.x = Vel.x;
//TempCode ARM 15Jul97 OldVel.y = Vel.y;
//TempCode ARM 15Jul97 OldVel.z = Vel.z;
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 Vel.x += acc.x * MODEL_DT;
//TempCode ARM 15Jul97 Vel.y += (acc.y - GRAVITY) * MODEL_DT;
//TempCode ARM 15Jul97 Vel.z += acc.z * MODEL_DT;
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 OldPos.x = Pos.x;
//TempCode ARM 15Jul97 OldPos.y = Pos.y;
//TempCode ARM 15Jul97 OldPos.z = Pos.z;
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 Pos.x += ((OldVel.x + Vel.x) * MODEL_DT) * 0.5;
//TempCode ARM 15Jul97 Pos.y += ((OldVel.y + Vel.y) * MODEL_DT) * 0.5;
//TempCode ARM 15Jul97 Pos.z += ((OldVel.z + Vel.z) * MODEL_DT) * 0.5;
//TempCode ARM 15Jul97 }
RotInt (ALL);
//TempCode ARM 15Jul97 {
//TempCode ARM 15Jul97 OldRotVel.x = RotVel.x;
//TempCode ARM 15Jul97 OldRotVel.y = RotVel.y;
//TempCode ARM 15Jul97 OldRotVel.z = RotVel.z;
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 RotVel.x += ((OldRotAcc.x + RotAcc.x) * MODEL_DT) * 0.5;
//TempCode ARM 15Jul97 RotVel.y += ((OldRotAcc.y + RotAcc.y) * MODEL_DT) * 0.5;
//TempCode ARM 15Jul97 RotVel.z += ((OldRotAcc.z + RotAcc.z) * MODEL_DT) * 0.5;
//TempCode ARM 15Jul97
//TempCode ARM 15Jul97 RotVelInt ();
//TempCode ARM 15Jul97 }
// UpdateAirStruc ();
// Ground ();
// Instruments (ControlledAC);
}
//컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴
//Procedure ProcessPistonEngine
//Author Craig Beeston
//Date Tue 11 Aug 98
//
//Description Processes a piston engine
// Calculates Thrust, Torque, Engine power and Engine speed
//
//Inputs
//
//Returns
//
//------------------------------------------------------------------------------
void Engine::ProcessPistonEngine (AirStrucPtr const ControlledAC)
{
AircraftAnimData* adptr = (AircraftAnimData *)ControlledAC->Anim;
SWord iDamage = 255 - (255 - UWord(adptr->ENGINELEFT)) * (255 - UWord(adptr->FRONT)) / 255;
if(pThrustPoint->Pos.x > 0)
iDamage = adptr->ENGINERIGHT;
FP MaxSpeed = 2 * Rpm100 * 0.001047197; //RPM 2 Rads/cs
if(iDamage == 254)
MaxSpeed = 0;
FP fDamage = 1.0 - FP(iDamage) * (1.0 / 255.0);
//DEADCODE CB 04/11/99 FP MinSpeed = Rpm0 * 0.001047197; //RPM 2 Rads/cs
//DEADCODE CB 04/11/99 if (Speed < MinSpeed) Speed = MinSpeed;
if (Speed > MaxSpeed) Speed = MaxSpeed;
FP EngRPM = Speed * 954.9296586;
FP PropSpeed = Speed * GearRatio;
FP PropSwirl = SlipRot * 0.5;
const FP BladeFract = 0.60;
FCRD Vel;
CPrd(Vel, pThrustPoint->Pos, pModel->RotVel);
Vel.z -= pModel->AirVel.z; //Velocity of air ahead of prop
FP PropAirVel = BladeFract * (PropSpeed - PropSwirl) * BladeRadius;
FP InflowAng = CalcAngle (PropAirVel, PropVel);
//Automatic prop control for AI aircraft
if((!Save_Data.flightdifficulty [FD_PROPPITCH]) || (ControlledAC != Persons2::PlayerSeenAC))
{
switch(PropType)
{
case PT_FIXED:
break;
case PT_2PITCH:
if(EngRPM > 1.15 * Rpm100)
PropSetting = 0;
if(EngRPM < 0.7 * Rpm100)
PropSetting = 1;
break;
case PT_VARIABLE:
PropSetting = 1.0 - 1.15 * ControlledAC->vel_ / ControlledAC->classtype->maxvel;
MODMAXMIN(PropSetting, 0.01, 1);
break;
case PT_CONSTSPEED:
if(ThrottleSetting <= 75)
PropSetting = 0;
else
PropSetting = (ThrottleSetting - 75.0) / 25.0;
//DEADCODE CSB 31/01/00 PropSetting = FP(ThrottleSetting) * 0.01;
//DEADCODE CSB 31/01/00 PropSetting = PropSetting * PropSetting * PropSetting;
break;
}
}
switch(PropType)
{
case PT_FIXED:
{
PropInc = PropMaxPitch;
break;
}
case PT_2PITCH:
{
FP DesiredInc = PropMaxPitch;
if(PropSetting > 0.5)
DesiredInc = PropMinPitch;
if(DesiredInc > PropInc)
{
PropInc += 0.002 * MODEL_ENGINE_DT; //AMM 24Nov99
if(PropInc > DesiredInc) PropInc = DesiredInc;
}
if(DesiredInc < PropInc)
{
PropInc -= 0.002 * MODEL_ENGINE_DT; //AMM 24Nov99
if(PropInc < DesiredInc) PropInc = DesiredInc;
}
break;
}
case PT_VARIABLE:
{
FP DesiredInc = PropMaxPitch;
if(PropSetting > 0)
{
FP Ratio = 0.5 * (PropSetting + 1.0);
DesiredInc = PropMinPitch * Ratio + PropMaxPitch * (1 - Ratio);
}
if(DesiredInc > PropInc)
{
PropInc += 0.002 * MODEL_ENGINE_DT; //AMM 24Nov99
if(PropInc > DesiredInc) PropInc = DesiredInc;
}
if(DesiredInc < PropInc)
{
PropInc -= 0.002 * MODEL_ENGINE_DT; //AMM 24Nov99
if(PropInc < DesiredInc) PropInc = DesiredInc;
}
break;
}
case PT_CONSTSPEED:
{
FP DesiredRpm = Rpm100 * (0.7 + 0.45 * PropSetting);
FP PropPitchRate = (EngRPM - DesiredRpm) * 0.00001;
PropInc += PropPitchRate * MODEL_ENGINE_DT; //AMM 24Nov99
break;
}
}
MODMAXMIN(PropInc, PropMinPitch, PropMaxPitch);
FP BladeSpeed = FSqrt(PropAirVel * PropAirVel + PropVel * PropVel);
FP BladeQS = 0.5 * pModel->AmbDensity * BladeSpeed * BladeArea;
//DeadCode AMM 29Jun99 J = PropVel / ((PropSpeed - PropSwirl) * 0.75 * BladeRadius); //Only Used for Text Screen
FP BladeL = 4.53 * (PropInc - InflowAng);
FP BladeD = 0.005 + (0.071 * BladeL * BladeL);
MODMAXMIN(BladeL, -1.0, 1.5);
BladeL *= BladeQS;
BladeD *= BladeQS;
Thrust = BladeL * PropAirVel - BladeD * PropVel;
Torque = BladeD * PropAirVel + BladeL * PropVel;
Torque *= BladeRadius * 0.5; //effective overall moment
//Engine Power Output
Power100 = pPower100->GetValue (EngRPM / Rpm100);
Power0 = pPower0->GetValue (EngRPM / Rpm100);
FP fPower = 0;
FP dTorque = 0;
ComplexEngineProcess(ControlledAC, fDamage, fPower, dTorque);
const FP MinThrottle = 0.125;
FP PowerFract = MinThrottle + ThrottleSetting * (1 - MinThrottle) * 0.01;
PowerFract *= fPower;
FP oldpower = Power;
Power = Power0 + ((Power100 - Power0) * PowerFract);
if((oldpower <= 0) && (Power > 0))
Trans_Obj.LaunchEngineStartup((mobileitem*)ControlledAC, *ControlledAC->currworld);
if((oldpower > 0) && (Power <= 0) && (ControlledAC == Persons2::PlayerSeenAC))
_Miles.PlayOnce(FIL_SFX_ENGINE_COUGH,Save_Data.vol.engine); //RJS 27Sep00
Power *= pPowerAlt->GetValue(pModel->Pos.y * 0.01);
Power *= p0;
//#define ENGINE_DATA
#ifdef ENGINE_DATA
//DeadCode CSB 27/10/99 /* TEST CODE CSB 27/10/99 */if(pModel->bACM)
/* TEST CODE CSB 27/10/99 */{
//DEADCODE CSB 11/01/00 /* TEST CODE CSB 29/09/99 */ PrintVar(40, 15, "Gravity %.3f ", FP(pModel->Inst.I_NormalAcc));
//DEADCODE CSB 11/01/00 /* TEST CODE CSB 29/09/99 */ PrintVar(40, 16, "IAS %.2f ", FP(pModel->Speed * FSqrt (pModel->AmbDensity / 0.0001225)));
//DEADCODE CSB 11/01/00 /* TEST CODE CSB 29/09/99 */ PrintVar(40, 17, "Vel %.2f ", FP(ControlledAC->vel_ * 0.0001));
//DEADCODE CSB 11/01/00 /* TEST CODE CSB 29/09/99 */ PrintVar(40, 18, "DesRpm %.2f ", FP(pModel->ModelPropSetting));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 15, "Power %.0f ", FP(Power / 745.7));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 16, "RPM %.0f ", FP(EngRPM));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 17, "Prop Inc %.2f ", FP(Rads2Degs(PropInc)));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 18, "Vel %.2f ", FP(-pModel->AirVel.z));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 19, "PropVel %.2f ", FP(PropVel));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 20, "SlipVel %.2f ", FP(SlipVel));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 21, "Alpha %.2f ", FP(Rads2Degs(PropInc - InflowAng)));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 24, "ROC fpm %.0f ", FP(pModel->Vel.y * 3.2808 * 60.0));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 22, "Thrust %.1f ", FP(Thrust));
/* TEST CODE CSB 29/09/99 */ PrintVar(20, 23, "Eff %.3f ", FP(Thrust * -pModel->AirVel.z / Power));
/* TEST CODE CSB 27/10/99 */}
#endif
FP EngTorque = 0;
if(Speed > 0)
EngTorque = Power / Speed;
EngTorque += dTorque;
//Slipstream Conditions
FP OldSlipRot = SlipRot;
FP SlipInertia = BladeRadius * BladeRadius * BladeRadius * BladeRadius
* 0.5 * FPIE * PropVel * pModel->AmbDensity;
if(SlipInertia > 0)
SlipRot = (Torque / SlipInertia + OldSlipRot) * 0.5;
else
SlipRot = 0;
if(SlipRot > PropSpeed) SlipRot = PropSpeed;
FP OldSlipVel = SlipVel;
FP PropArea = FPIE * BladeRadius * BladeRadius;
FP TempSlip = 2 * Thrust / (pModel->AmbDensity * PropArea) + Vel.z * Vel.z;
if (TempSlip < 0) SlipVel = -Vel.z;
else
SlipVel = sqrt(TempSlip);
SlipVel = (SlipVel + OldSlipVel) * 0.5;
PropVel = 0.5 * (0.5 * (Vel.z + SlipVel) + PropVel);
// calc engine speed
FP EngRotAcc = (EngTorque - Torque * GearRatio) / MoI;
//DeadCode CSB 27/10/99 if (!Save_Data.flightdifficulty [FD_THRUSTPOWERCONTROL])
//DeadCode CSB 27/10/99 EngRotAcc *= 2; //Fast Spooling
//DEADCODE AMM 24/11/99 Speed += pModel->MODEL_DT * EngRotAcc;
Speed += MODEL_ENGINE_DT * EngRotAcc; //AMM 24/11/99
if(Speed < 0) Speed = 0;
//DEADCODE CB 04/11/99 if (Speed < MinSpeed) Speed = MinSpeed;
if (Speed > MaxSpeed) Speed = MaxSpeed;
Torque = -Torque * RotateDirection;//(EngTorque - Torque / GearRatio); //Reacted into Airframe
if (Save_Data.flightdifficulty [FD_SLIPSTREAMEFFECTS])
{
FCRD TempRot;
CopyVec(pModel->RotVel, TempRot);
TempRot.z += Speed * RotateDirection;
moment.x = TempRot.x * PropInertia.x;
moment.y = TempRot.y * PropInertia.y;
moment.z = TempRot.z * PropInertia.z;
CPrd(moment, moment, TempRot);
moment.x *= -1;
moment.y *= -1;
moment.z *= -1;
}
else
NullVec(moment);
}