/* ---------------------------------------------------------------------- */
void
setFlowAccuColorTable(char* cellname) {
struct Colors colors;
const char *mapset;
struct Range r;
mapset = G_find_raster(cellname, "");
if (mapset == NULL) {
G_fatal_error (_("Raster map <%s> not found"), cellname);
}
if (Rast_read_range(cellname, mapset, &r) == -1) {
G_fatal_error(_("cannot read range"));
}
/*fprintf(stderr, "%s range is: min=%d, max=%d\n", cellname, r.min, r.max);*/
int v[6];
v[0] = r.min;
v[1] = 5;
v[2] = 30;
v[3] = 100;
v[4] = 1000;
v[5] = r.max;
Rast_init_colors(&colors);
Rast_add_c_color_rule(&v[0], 255,255,255, &v[1], 255,255,0, &colors);
Rast_add_c_color_rule(&v[1], 255,255,0, &v[2], 0,255,255, &colors);
Rast_add_c_color_rule(&v[2], 0,255,255, &v[3], 0,127,255, &colors);
Rast_add_c_color_rule(&v[3], 0,127,255, &v[4], 0,0,255, &colors);
Rast_add_c_color_rule(&v[4], 0,0,255, &v[5], 0,0,0, &colors);
Rast_write_colors(cellname, mapset, &colors);
Rast_free_colors(&colors);
}
int write_contrast_colors (char* raster) {
struct Colors colors;
struct Categories cats;
FCOLORS fcolors[9]={ /* colors for positive openness */
{-2500, 0, 0, 50, NULL},
{-100, 0, 0, 56, NULL},
{-15, 0, 56, 128, NULL},
{-3, 0, 128, 255, NULL},
{0, 255, 255, 255, NULL},
{3, 255, 128, 0, NULL},
{15, 128, 56, 0, NULL},
{100, 56, 0, 0, NULL},
{2500, 50, 0, 0, NULL}};
int i;
Rast_init_colors(&colors);
for(i=0;i<8;++i)
Rast_add_d_color_rule(
&fcolors[i].cat, fcolors[i].r, fcolors[i].g, fcolors[i].b,
&fcolors[i+1].cat, fcolors[i+1].r, fcolors[i+1].g, fcolors[i+1].b,
&colors);
Rast_write_colors(raster, G_mapset(), &colors);
Rast_free_colors(&colors);
/*
Rast_init_cats("Forms", &cats);
for(i=0;i<8;++i)
Rast_set_cat(&ccolors[i].cat, &ccolors[i].cat, ccolors[i].label, &cats, CELL_TYPE);
Rast_write_cats(raster, &cats);
Rast_free_cats(&cats);
*/
return 0;
}
/*!
\brief Unload color table
\param color_data color data buffer
\return -1 on failure
\return 1 on success
*/
int Gvl_unload_colors_data(void *color_data)
{
Rast_free_colors(color_data);
G_free(color_data);
return (1);
}
int support(char **names,
struct Cell_stats *statf, int nfiles,
struct Categories *cats,
int *cats_ok,
struct Colors *colr, int *colr_ok, RASTER_MAP_TYPE out_type)
{
int i;
struct Categories pcats;
struct Colors pcolr;
CELL n;
long count;
int red, grn, blu;
int do_cats, do_colr;
*cats_ok = 1;
*colr_ok = 1;
if (Rast_read_cats(names[0], "", cats) < 0)
*cats_ok = 0;
G_suppress_warnings(1);
if (Rast_read_colors(names[0], "", colr) < 0)
*colr_ok = 0;
G_suppress_warnings(0);
if (*cats_ok == 0 && *colr_ok == 0)
return 0;
for (i = 1; i < nfiles; i++) {
do_cats = *cats_ok && (Rast_read_cats(names[i], "", &pcats) >= 0);
G_suppress_warnings(1);
do_colr = *colr_ok && (Rast_read_colors(names[i], "", &pcolr) >= 0);
G_suppress_warnings(0);
if (!do_cats && !do_colr)
continue;
if (out_type == CELL_TYPE) {
Rast_rewind_cell_stats(statf + i);
while (Rast_next_cell_stat(&n, &count, statf + i))
if (n && !Rast_find_cell_stat(n, &count, statf)) {
if (do_cats) {
Rast_update_cell_stats(&n, 1, statf);
Rast_set_c_cat(&n, &n, Rast_get_c_cat((CELL *) &n, &pcats), cats);
}
if (do_colr) {
Rast_get_c_color(&n, &red, &grn, &blu, &pcolr);
Rast_set_c_color(n, red, grn, blu, colr);
}
}
}
/* else the color will be the color of the first map */
if (do_cats)
Rast_free_cats(&pcats);
if (do_colr)
/* otherwise this memory is used in colr pointer */
Rast_free_colors(&pcolr);
}
return 1;
}
/*!
\brief Pack color table (floating-point map)
Passed a array of floats that will be converted from cell values
to packed colors (0xbbggrr) and float to int
Floating point data not freed here, use:
gsds_free_data_buff(id, ATTY_FLOAT)
\param filename raster map name
\param fbuf
\param ibuf
\param rows number of rows
\param cols number of cols
*/
void Gs_pack_colors_float(const char *filename, float *fbuf, int *ibuf,
int rows, int cols)
{
const char *mapset;
struct Colors colrules;
unsigned char *r, *g, *b, *set;
int i, j, *icur;
FCELL *fcur;
mapset = G_find_raster2(filename, "");
if (!mapset) {
G_warning(_("Raster map <%s> not found"), filename);
return;
}
r = (unsigned char *)G_malloc(cols);
g = (unsigned char *)G_malloc(cols);
b = (unsigned char *)G_malloc(cols);
set = (unsigned char *)G_malloc(cols);
Rast_read_colors(filename, mapset, &colrules);
fcur = fbuf;
icur = ibuf;
G_message(_("Translating colors from raster map <%s>..."),
G_fully_qualified_name(filename, mapset));
for (i = 0; i < rows; i++) {
Rast_lookup_f_colors(fcur, r, g, b, set, cols, &colrules);
G_percent(i, rows, 2);
for (j = 0; j < cols; j++) {
if (set[j]) {
icur[j] =
(r[j] & 0xff) | ((g[j] & 0xff) << 8) | ((b[j] & 0xff) <<
16);
}
else {
icur[j] = NO_DATA_COL;
}
}
icur = &(icur[cols]);
fcur = &(fcur[cols]);
}
G_percent(1, 1, 1);
Rast_free_colors(&colrules);
G_free(r);
G_free(g);
G_free(b);
G_free(set);
return;
}
int table_toggle(char *name, char *mapset, struct Colors *colors)
{
CELL min, max;
char *msg = '\0';
char info[100];
Rast_get_c_color_range(&min, &max, colors);
Rast_free_colors(colors);
sprintf(info, "Color range: %d to %d\n", min, max);
toggle_number++;
toggle_number &= 6;
switch (toggle_number) {
case 0:
msg = "Original colors";
Rast_read_colors(name, mapset, colors);
break;
case 1:
msg = "Ramp colors";
Rast_make_ramp_colors(colors, min, max);
break;
case 2:
msg = "Grey scale colors";
Rast_make_grey_scale_colors(colors, min, max);
break;
case 3:
msg = "Random colors";
Rast_make_random_colors(colors, min, max);
break;
case 4:
msg = "Wave colors";
Rast_make_wave_colors(colors, min, max);
break;
case 5:
msg = "Aspect colors";
Rast_make_aspect_colors(colors, min, max);
break;
}
Write_message(2, msg);
Write_message(3, info);
return 0;
}
int write_form_cat_colors (char* raster, CATCOLORS* ccolors) {
struct Colors colors;
struct Categories cats;
int i;
Rast_init_colors(&colors);
for(i=1;i<CNT;++i)
Rast_add_color_rule(
&ccolors[i].cat, ccolors[i].r, ccolors[i].g, ccolors[i].b,
&ccolors[i].cat, ccolors[i].r, ccolors[i].g, ccolors[i].b,
&colors, CELL_TYPE);
Rast_write_colors(raster, G_mapset(), &colors);
Rast_free_colors(&colors);
Rast_init_cats("Forms", &cats);
for(i=1;i<CNT;++i)
Rast_set_cat(&ccolors[i].cat, &ccolors[i].cat, ccolors[i].label, &cats, CELL_TYPE);
Rast_write_cats(raster, &cats);
Rast_free_cats(&cats);
return 0;
}
/* ---------------------------------------------------------------------- */
void
setSinkWatershedColorTable(char* cellname) {
struct Colors colors;
const char *mapset;
struct Range r;
mapset = G_find_raster(cellname, "");
if (mapset == NULL) {
G_fatal_error (_("Raster map <%s> not found"), cellname);
}
if (Rast_read_range(cellname, mapset, &r) == -1) {
G_fatal_error(_("cannot read range"));
}
Rast_init_colors(&colors);
Rast_make_random_colors(&colors, 1, r.max);
Rast_write_colors(cellname, mapset, &colors);
Rast_free_colors(&colors);
}
void write_cols(void)
{
struct Colors colours;
CELL val1, val2;
Rast_init_colors(&colours);
val1 = FLAT;
val2 = PIT;
Rast_add_c_color_rule(&val1, 180, 180, 180, /* White */
&val2, 0, 0, 0, &colours); /* Black */
val1 = CHANNEL;
val2 = PASS;
Rast_add_c_color_rule(&val1, 0, 0, 255, /* Blue */
&val2, 0, 255, 0, &colours); /* Green */
val1 = RIDGE;
val2 = PEAK;
Rast_add_c_color_rule(&val1, 255, 255, 0, /* Yellow */
&val2, 255, 0, 0, &colours); /* Red */
Rast_write_colors(rast_out_name, G_mapset(), &colours);
Rast_free_colors(&colours);
}
int main(int argc, char *argv[])
{
char *name, *outfile;
const char *unit;
int unit_id;
double factor;
int fd, projection;
FILE *fp, *coor_fp;
double res;
char *null_string;
char ebuf[256], nbuf[256], label[512], formatbuff[256];
char b1[100], b2[100];
int n;
int havefirst = FALSE;
int coords = 0, i, k = -1;
double e1, e2, n1, n2;
RASTER_MAP_TYPE data_type;
struct Cell_head window;
struct
{
struct Option *opt1, *profile, *res, *output, *null_str, *coord_file, *units;
struct Flag *g, *c, *m;
}
parm;
struct GModule *module;
G_gisinit(argv[0]);
/* Set description */
module = G_define_module();
G_add_keyword(_("raster"));
G_add_keyword(_("profile"));
module->description =
_("Outputs the raster map layer values lying on user-defined line(s).");
parm.opt1 = G_define_standard_option(G_OPT_R_INPUT);
parm.output = G_define_standard_option(G_OPT_F_OUTPUT);
parm.output->required = NO;
parm.output->answer = "-";
parm.output->description =
_("Name of file for output (use output=- for stdout)");
parm.profile = G_define_standard_option(G_OPT_M_COORDS);
parm.profile->required = NO;
parm.profile->multiple = YES;
parm.profile->description = _("Profile coordinate pairs");
parm.coord_file = G_define_standard_option(G_OPT_F_INPUT);
parm.coord_file->key = "file";
parm.coord_file->required = NO;
parm.coord_file->label =
_("Name of input file containing coordinate pairs");
parm.coord_file->description =
_("Use instead of the 'coordinates' option. "
"\"-\" reads from stdin.");
parm.res = G_define_option();
parm.res->key = "resolution";
parm.res->type = TYPE_DOUBLE;
parm.res->required = NO;
parm.res->description =
_("Resolution along profile (default = current region resolution)");
parm.null_str = G_define_option();
parm.null_str->key = "null";
parm.null_str->type = TYPE_STRING;
parm.null_str->required = NO;
parm.null_str->answer = "*";
parm.null_str->description = _("Character to represent no data cell");
parm.g = G_define_flag();
parm.g->key = 'g';
parm.g->description =
_("Output easting and northing in first two columns of four column output");
parm.c = G_define_flag();
parm.c->key = 'c';
parm.c->description =
_("Output RRR:GGG:BBB color values for each profile point");
parm.units = G_define_standard_option(G_OPT_M_UNITS);
parm.units->options = "meters,kilometers,feet,miles";
parm.units->label = parm.units->description;
parm.units->description = _("If units are not specified, current location units are used. "
"Meters are used by default in geographic (latlon) locations.");
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
clr = 0;
if (parm.c->answer)
clr = 1; /* color output */
null_string = parm.null_str->answer;
if ((parm.profile->answer && parm.coord_file->answer) ||
(!parm.profile->answer && !parm.coord_file->answer))
G_fatal_error(_("Either use profile option or coordinate_file "
" option, but not both"));
G_get_window(&window);
projection = G_projection();
/* get conversion factor and units name */
if (parm.units->answer) {
unit_id = G_units(parm.units->answer);
factor = 1. / G_meters_to_units_factor(unit_id);
unit = G_get_units_name(unit_id, 1, 0);
}
/* keep meters in case of latlon */
else if (projection == PROJECTION_LL) {
factor = 1;
unit = "meters";
}
else {
/* get conversion factor to current units */
unit = G_database_unit_name(1);
factor = G_database_units_to_meters_factor();
}
if (parm.res->answer) {
res = atof(parm.res->answer);
/* Catch bad resolution ? */
if (res <= 0)
G_fatal_error(_("Illegal resolution %g [%s]"), res / factor, unit);
}
else {
/* Do average of EW and NS res */
res = (window.ew_res + window.ns_res) / 2;
}
G_message(_("Using resolution: %g [%s]"), res / factor, unit);
G_begin_distance_calculations();
/* Open Input File for reading */
/* Get Input Name */
name = parm.opt1->answer;
if (parm.g->answer)
coords = 1;
/* Open Raster File */
fd = Rast_open_old(name, "");
/* initialize color structure */
if (clr)
Rast_read_colors(name, "", &colors);
/* Open ASCII file for output or stdout */
outfile = parm.output->answer;
if ((strcmp("-", outfile)) == 0) {
fp = stdout;
}
else if (NULL == (fp = fopen(outfile, "w")))
G_fatal_error(_("Unable to open file <%s>"), outfile);
/* Get Raster Type */
data_type = Rast_get_map_type(fd);
/* Done with file */
/* Show message giving output format */
G_message(_("Output columns:"));
if (coords == 1)
sprintf(formatbuff,
_("Easting, Northing, Along track dist. [%s], Elevation"), unit);
else
sprintf(formatbuff, _("Along track dist. [%s], Elevation"), unit);
if (clr)
strcat(formatbuff, _(" RGB color"));
G_message(formatbuff);
/* Get Profile Start Coords */
if (parm.coord_file->answer) {
if (strcmp("-", parm.coord_file->answer) == 0)
coor_fp = stdin;
else
coor_fp = fopen(parm.coord_file->answer, "r");
if (coor_fp == NULL)
G_fatal_error(_("Could not open <%s>"), parm.coord_file->answer);
for (n = 1; input(b1, ebuf, b2, nbuf, label, coor_fp); n++) {
G_debug(4, "stdin line %d: ebuf=[%s] nbuf=[%s]", n, ebuf, nbuf);
if (!G_scan_easting(ebuf, &e2, G_projection()) ||
!G_scan_northing(nbuf, &n2, G_projection()))
G_fatal_error(_("Invalid coordinates %s %s"), ebuf, nbuf);
if (havefirst)
do_profile(e1, e2, n1, n2, coords, res, fd, data_type,
fp, null_string, unit, factor);
e1 = e2;
n1 = n2;
havefirst = TRUE;
}
if (coor_fp != stdin)
fclose(coor_fp);
}
else {
/* Coords given on the Command Line using the profile= option */
for (i = 0; parm.profile->answers[i]; i += 2) {
/* Test for number coordinate pairs */
k = i;
}
if (k == 0) {
/* Only one coordinate pair supplied */
G_scan_easting(parm.profile->answers[0], &e1, G_projection());
G_scan_northing(parm.profile->answers[1], &n1, G_projection());
e2 = e1;
n2 = n1;
/* Get profile info */
do_profile(e1, e2, n1, n2, coords, res, fd, data_type, fp,
null_string, unit, factor);
}
else {
for (i = 0; i <= k - 2; i += 2) {
G_scan_easting(parm.profile->answers[i], &e1, G_projection());
G_scan_northing(parm.profile->answers[i + 1], &n1,
G_projection());
G_scan_easting(parm.profile->answers[i + 2], &e2,
G_projection());
G_scan_northing(parm.profile->answers[i + 3], &n2,
G_projection());
/* Get profile info */
do_profile(e1, e2, n1, n2, coords, res, fd, data_type,
fp, null_string, unit, factor);
}
}
}
Rast_close(fd);
fclose(fp);
if (clr)
Rast_free_colors(&colors);
exit(EXIT_SUCCESS);
} /* Done with main */
int main(int argc, char **argv)
{
char *mapname, /* ptr to name of output layer */
*setname, /* ptr to name of input mapset */
*ipolname; /* name of interpolation method */
int fdi, /* input map file descriptor */
fdo, /* output map file descriptor */
method, /* position of method in table */
permissions, /* mapset permissions */
cell_type, /* output celltype */
cell_size, /* size of a cell in bytes */
row, col, /* counters */
irows, icols, /* original rows, cols */
orows, ocols, have_colors, /* Input map has a colour table */
overwrite, /* Overwrite */
curr_proj; /* output projection (see gis.h) */
void *obuffer, /* buffer that holds one output row */
*obufptr; /* column ptr in output buffer */
struct cache *ibuffer; /* buffer that holds the input map */
func interpolate; /* interpolation routine */
double xcoord1, xcoord2, /* temporary x coordinates */
ycoord1, ycoord2, /* temporary y coordinates */
col_idx, /* column index in input matrix */
row_idx, /* row index in input matrix */
onorth, osouth, /* save original border coords */
oeast, owest, inorth, isouth, ieast, iwest;
char north_str[30], south_str[30], east_str[30], west_str[30];
struct Colors colr; /* Input map colour table */
struct History history;
struct pj_info iproj, /* input map proj parameters */
oproj; /* output map proj parameters */
struct Key_Value *in_proj_info, /* projection information of */
*in_unit_info, /* input and output mapsets */
*out_proj_info, *out_unit_info;
struct GModule *module;
struct Flag *list, /* list files in source location */
*nocrop, /* don't crop output map */
*print_bounds, /* print output bounds and exit */
*gprint_bounds; /* same but print shell style */
struct Option *imapset, /* name of input mapset */
*inmap, /* name of input layer */
*inlocation, /* name of input location */
*outmap, /* name of output layer */
*indbase, /* name of input database */
*interpol, /* interpolation method:
nearest neighbor, bilinear, cubic */
*memory, /* amount of memory for cache */
*res; /* resolution of target map */
struct Cell_head incellhd, /* cell header of input map */
outcellhd; /* and output map */
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("raster"));
G_add_keyword(_("projection"));
G_add_keyword(_("transformation"));
module->description =
_("Re-projects a raster map from given location to the current location.");
inmap = G_define_standard_option(G_OPT_R_INPUT);
inmap->description = _("Name of input raster map to re-project");
inmap->required = NO;
inmap->guisection = _("Source");
inlocation = G_define_option();
inlocation->key = "location";
inlocation->type = TYPE_STRING;
inlocation->required = YES;
inlocation->description = _("Location containing input raster map");
inlocation->gisprompt = "old,location,location";
inlocation->key_desc = "name";
imapset = G_define_standard_option(G_OPT_M_MAPSET);
imapset->label = _("Mapset containing input raster map");
imapset->description = _("default: name of current mapset");
imapset->guisection = _("Source");
indbase = G_define_option();
indbase->key = "dbase";
indbase->type = TYPE_STRING;
indbase->required = NO;
indbase->description = _("Path to GRASS database of input location");
indbase->gisprompt = "old,dbase,dbase";
indbase->key_desc = "path";
indbase->guisection = _("Source");
outmap = G_define_standard_option(G_OPT_R_OUTPUT);
outmap->required = NO;
outmap->description = _("Name for output raster map (default: same as 'input')");
outmap->guisection = _("Target");
ipolname = make_ipol_list();
interpol = G_define_option();
interpol->key = "method";
interpol->type = TYPE_STRING;
interpol->required = NO;
interpol->answer = "nearest";
interpol->options = ipolname;
interpol->description = _("Interpolation method to use");
interpol->guisection = _("Target");
interpol->descriptions = make_ipol_desc();
memory = G_define_option();
memory->key = "memory";
memory->type = TYPE_INTEGER;
memory->required = NO;
memory->description = _("Cache size (MiB)");
res = G_define_option();
res->key = "resolution";
res->type = TYPE_DOUBLE;
res->required = NO;
res->description = _("Resolution of output raster map");
res->guisection = _("Target");
list = G_define_flag();
list->key = 'l';
list->description = _("List raster maps in input location and exit");
nocrop = G_define_flag();
nocrop->key = 'n';
nocrop->description = _("Do not perform region cropping optimization");
print_bounds = G_define_flag();
print_bounds->key = 'p';
print_bounds->description =
_("Print input map's bounds in the current projection and exit");
print_bounds->guisection = _("Target");
gprint_bounds = G_define_flag();
gprint_bounds->key = 'g';
gprint_bounds->description =
_("Print input map's bounds in the current projection and exit (shell style)");
gprint_bounds->guisection = _("Target");
/* The parser checks if the map already exists in current mapset,
we switch out the check and do it
in the module after the parser */
overwrite = G_check_overwrite(argc, argv);
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
/* get the method */
for (method = 0; (ipolname = menu[method].name); method++)
if (strcmp(ipolname, interpol->answer) == 0)
break;
if (!ipolname)
G_fatal_error(_("<%s=%s> unknown %s"),
interpol->key, interpol->answer, interpol->key);
interpolate = menu[method].method;
mapname = outmap->answer ? outmap->answer : inmap->answer;
if (mapname && !list->answer && !overwrite &&
G_find_raster(mapname, G_mapset()))
G_fatal_error(_("option <%s>: <%s> exists."), "output", mapname);
setname = imapset->answer ? imapset->answer : G_store(G_mapset());
if (strcmp(inlocation->answer, G_location()) == 0 &&
(!indbase->answer || strcmp(indbase->answer, G_gisdbase()) == 0))
#if 0
G_fatal_error(_("Input and output locations can not be the same"));
#else
G_warning(_("Input and output locations are the same"));
#endif
G_get_window(&outcellhd);
if(gprint_bounds->answer && !print_bounds->answer)
print_bounds->answer = gprint_bounds->answer;
curr_proj = G_projection();
/* Get projection info for output mapset */
if ((out_proj_info = G_get_projinfo()) == NULL)
G_fatal_error(_("Unable to get projection info of output raster map"));
if ((out_unit_info = G_get_projunits()) == NULL)
G_fatal_error(_("Unable to get projection units of output raster map"));
if (pj_get_kv(&oproj, out_proj_info, out_unit_info) < 0)
G_fatal_error(_("Unable to get projection key values of output raster map"));
/* Change the location */
G__create_alt_env();
G__setenv("GISDBASE", indbase->answer ? indbase->answer : G_gisdbase());
G__setenv("LOCATION_NAME", inlocation->answer);
permissions = G__mapset_permissions(setname);
if (permissions < 0) /* can't access mapset */
G_fatal_error(_("Mapset <%s> in input location <%s> - %s"),
setname, inlocation->answer,
permissions == 0 ? _("permission denied")
: _("not found"));
/* if requested, list the raster maps in source location - MN 5/2001 */
if (list->answer) {
int i;
char **list;
G_verbose_message(_("Checking location <%s> mapset <%s>"),
inlocation->answer, setname);
list = G_list(G_ELEMENT_RASTER, G__getenv("GISDBASE"),
G__getenv("LOCATION_NAME"), setname);
for (i = 0; list[i]; i++) {
fprintf(stdout, "%s\n", list[i]);
}
fflush(stdout);
exit(EXIT_SUCCESS); /* leave r.proj after listing */
}
if (!inmap->answer)
G_fatal_error(_("Required parameter <%s> not set"), inmap->key);
if (!G_find_raster(inmap->answer, setname))
G_fatal_error(_("Raster map <%s> in location <%s> in mapset <%s> not found"),
inmap->answer, inlocation->answer, setname);
/* Read input map colour table */
have_colors = Rast_read_colors(inmap->answer, setname, &colr);
/* Get projection info for input mapset */
if ((in_proj_info = G_get_projinfo()) == NULL)
G_fatal_error(_("Unable to get projection info of input map"));
if ((in_unit_info = G_get_projunits()) == NULL)
G_fatal_error(_("Unable to get projection units of input map"));
if (pj_get_kv(&iproj, in_proj_info, in_unit_info) < 0)
G_fatal_error(_("Unable to get projection key values of input map"));
G_free_key_value(in_proj_info);
G_free_key_value(in_unit_info);
G_free_key_value(out_proj_info);
G_free_key_value(out_unit_info);
if (G_verbose() > G_verbose_std())
pj_print_proj_params(&iproj, &oproj);
/* this call causes r.proj to read the entire map into memeory */
Rast_get_cellhd(inmap->answer, setname, &incellhd);
Rast_set_input_window(&incellhd);
if (G_projection() == PROJECTION_XY)
G_fatal_error(_("Unable to work with unprojected data (xy location)"));
/* Save default borders so we can show them later */
inorth = incellhd.north;
isouth = incellhd.south;
ieast = incellhd.east;
iwest = incellhd.west;
irows = incellhd.rows;
icols = incellhd.cols;
onorth = outcellhd.north;
osouth = outcellhd.south;
oeast = outcellhd.east;
owest = outcellhd.west;
orows = outcellhd.rows;
ocols = outcellhd.cols;
if (print_bounds->answer) {
G_message(_("Input map <%s@%s> in location <%s>:"),
inmap->answer, setname, inlocation->answer);
if (pj_do_proj(&iwest, &isouth, &iproj, &oproj) < 0)
G_fatal_error(_("Error in pj_do_proj (projection of input coordinate pair)"));
if (pj_do_proj(&ieast, &inorth, &iproj, &oproj) < 0)
G_fatal_error(_("Error in pj_do_proj (projection of input coordinate pair)"));
G_format_northing(inorth, north_str, curr_proj);
G_format_northing(isouth, south_str, curr_proj);
G_format_easting(ieast, east_str, curr_proj);
G_format_easting(iwest, west_str, curr_proj);
if(gprint_bounds->answer) {
fprintf(stdout, "n=%s s=%s w=%s e=%s rows=%d cols=%d\n",
north_str, south_str, west_str, east_str, irows, icols);
}
else {
fprintf(stdout, "Source cols: %d\n", icols);
fprintf(stdout, "Source rows: %d\n", irows);
fprintf(stdout, "Local north: %s\n", north_str);
fprintf(stdout, "Local south: %s\n", south_str);
fprintf(stdout, "Local west: %s\n", west_str);
fprintf(stdout, "Local east: %s\n", east_str);
}
/* somehow approximate local ewres, nsres ?? (use 'g.region -m' on lat/lon side) */
exit(EXIT_SUCCESS);
}
/* Cut non-overlapping parts of input map */
if (!nocrop->answer)
bordwalk(&outcellhd, &incellhd, &oproj, &iproj);
/* Add 2 cells on each side for bilinear/cubic & future interpolation methods */
/* (should probably be a factor based on input and output resolution) */
incellhd.north += 2 * incellhd.ns_res;
incellhd.east += 2 * incellhd.ew_res;
incellhd.south -= 2 * incellhd.ns_res;
incellhd.west -= 2 * incellhd.ew_res;
if (incellhd.north > inorth)
incellhd.north = inorth;
if (incellhd.east > ieast)
incellhd.east = ieast;
if (incellhd.south < isouth)
incellhd.south = isouth;
if (incellhd.west < iwest)
incellhd.west = iwest;
Rast_set_input_window(&incellhd);
/* And switch back to original location */
G__switch_env();
/* Adjust borders of output map */
if (!nocrop->answer)
bordwalk(&incellhd, &outcellhd, &iproj, &oproj);
#if 0
outcellhd.west = outcellhd.south = HUGE_VAL;
outcellhd.east = outcellhd.north = -HUGE_VAL;
for (row = 0; row < incellhd.rows; row++) {
ycoord1 = Rast_row_to_northing((double)(row + 0.5), &incellhd);
for (col = 0; col < incellhd.cols; col++) {
xcoord1 = Rast_col_to_easting((double)(col + 0.5), &incellhd);
pj_do_proj(&xcoord1, &ycoord1, &iproj, &oproj);
if (xcoord1 > outcellhd.east)
outcellhd.east = xcoord1;
if (ycoord1 > outcellhd.north)
outcellhd.north = ycoord1;
if (xcoord1 < outcellhd.west)
outcellhd.west = xcoord1;
if (ycoord1 < outcellhd.south)
outcellhd.south = ycoord1;
}
}
#endif
if (res->answer != NULL) /* set user defined resolution */
outcellhd.ns_res = outcellhd.ew_res = atof(res->answer);
G_adjust_Cell_head(&outcellhd, 0, 0);
Rast_set_output_window(&outcellhd);
G_message(" ");
G_message(_("Input:"));
G_message(_("Cols: %d (%d)"), incellhd.cols, icols);
G_message(_("Rows: %d (%d)"), incellhd.rows, irows);
G_message(_("North: %f (%f)"), incellhd.north, inorth);
G_message(_("South: %f (%f)"), incellhd.south, isouth);
G_message(_("West: %f (%f)"), incellhd.west, iwest);
G_message(_("East: %f (%f)"), incellhd.east, ieast);
G_message(_("EW-res: %f"), incellhd.ew_res);
G_message(_("NS-res: %f"), incellhd.ns_res);
G_message(" ");
G_message(_("Output:"));
G_message(_("Cols: %d (%d)"), outcellhd.cols, ocols);
G_message(_("Rows: %d (%d)"), outcellhd.rows, orows);
G_message(_("North: %f (%f)"), outcellhd.north, onorth);
G_message(_("South: %f (%f)"), outcellhd.south, osouth);
G_message(_("West: %f (%f)"), outcellhd.west, owest);
G_message(_("East: %f (%f)"), outcellhd.east, oeast);
G_message(_("EW-res: %f"), outcellhd.ew_res);
G_message(_("NS-res: %f"), outcellhd.ns_res);
G_message(" ");
/* open and read the relevant parts of the input map and close it */
G__switch_env();
Rast_set_input_window(&incellhd);
fdi = Rast_open_old(inmap->answer, setname);
cell_type = Rast_get_map_type(fdi);
ibuffer = readcell(fdi, memory->answer);
Rast_close(fdi);
G__switch_env();
Rast_set_output_window(&outcellhd);
if (strcmp(interpol->answer, "nearest") == 0) {
fdo = Rast_open_new(mapname, cell_type);
obuffer = (CELL *) Rast_allocate_output_buf(cell_type);
}
else {
fdo = Rast_open_fp_new(mapname);
cell_type = FCELL_TYPE;
obuffer = (FCELL *) Rast_allocate_output_buf(cell_type);
}
cell_size = Rast_cell_size(cell_type);
xcoord1 = xcoord2 = outcellhd.west + (outcellhd.ew_res / 2);
/**/ ycoord1 = ycoord2 = outcellhd.north - (outcellhd.ns_res / 2);
/**/ G_important_message(_("Projecting..."));
G_percent(0, outcellhd.rows, 2);
for (row = 0; row < outcellhd.rows; row++) {
obufptr = obuffer;
for (col = 0; col < outcellhd.cols; col++) {
/* project coordinates in output matrix to */
/* coordinates in input matrix */
if (pj_do_proj(&xcoord1, &ycoord1, &oproj, &iproj) < 0)
Rast_set_null_value(obufptr, 1, cell_type);
else {
/* convert to row/column indices of input matrix */
col_idx = (xcoord1 - incellhd.west) / incellhd.ew_res;
row_idx = (incellhd.north - ycoord1) / incellhd.ns_res;
/* and resample data point */
interpolate(ibuffer, obufptr, cell_type,
&col_idx, &row_idx, &incellhd);
}
obufptr = G_incr_void_ptr(obufptr, cell_size);
xcoord2 += outcellhd.ew_res;
xcoord1 = xcoord2;
ycoord1 = ycoord2;
}
Rast_put_row(fdo, obuffer, cell_type);
xcoord1 = xcoord2 = outcellhd.west + (outcellhd.ew_res / 2);
ycoord2 -= outcellhd.ns_res;
ycoord1 = ycoord2;
G_percent(row, outcellhd.rows - 1, 2);
}
Rast_close(fdo);
if (have_colors > 0) {
Rast_write_colors(mapname, G_mapset(), &colr);
Rast_free_colors(&colr);
}
Rast_short_history(mapname, "raster", &history);
Rast_command_history(&history);
Rast_write_history(mapname, &history);
G_done_msg(NULL);
exit(EXIT_SUCCESS);
}
void set_map(char *name, char *name1, char *name2, struct Cell_head window,
int top, int bot, int left, int right)
{
char cmd[30], cmd1[30], cmd2[30], **sel;
int i, j, btn, d, class, top0, bot0, right0, left0, paint = 0, method;
double msc[2], dtmp;
/* VARIABLES
IN:
name = raster map name to be set up
name1 = overlay vector map name
name2 = overlay site map name
*/
colors_old = (struct Colors *)G_malloc(1 * sizeof(struct Colors));
Rast_init_colors(colors_old);
Rast_read_colors(name, G_mapset(), colors_old);
G_system("clear");
paint_map(name, name1, name2);
paint = 1;
/* setup the screen to raster map
coordinate conversion system */
scr_cell(&window, top, bot, left, right, msc);
top0 = top;
bot0 = bot;
left0 = left;
right0 = right;
/* display the menu and instructions */
again:
if (!paint) {
if (G_yes
("\n Refresh the screen before choosing more setup? ", 1))
paint_map(name, name1, name2);
}
else
G_system("clear");
fprintf(stderr, "\n\n CHOOSE THE SETUP OPTION:\n\n");
fprintf(stderr, " Draw sampling regions 1\n");
fprintf(stderr, " Setup a sampling frame 2\n");
fprintf(stderr, " Setup sampling units 3\n");
fprintf(stderr, " Setup a moving window 4\n");
fprintf(stderr, " Setup group or class limits 5\n");
fprintf(stderr, " Change the raster map color table 6\n");
fprintf(stderr, " Exit and save setup 7\n");
do {
fprintf(stderr, "\n Which Number? ");
dtmp = 5.0;
numtrap(1, &dtmp);
if ((method = fabs(dtmp)) > 7 || method < 1) {
fprintf(stderr, "\n Choice must between 1-7; try again");
}
}
while (method > 7 || method < 1);
/* setup regions */
if (method == 1)
set_rgn(msc, name, name1, name2);
/* setup the sampling frame */
else if (method == 2) {
top = top0;
bot = bot0;
right = right0;
left = left0;
set_frame(msc, &top, &bot, &left, &right);
}
/* setup sampling units */
else if (method == 3) {
sample(top, bot, left, right, name, name1, name2, msc);
}
/* setup the moving window */
else if (method == 4) {
mov_wind(top, bot, left, right, name, name1, name2, msc);
}
/* setup group/class limits */
else if (method == 5) {
/* setup the buffer to store the user's input */
sel = (char **)G_malloc(10 * sizeof(char *));
for (i = 0; i < 9; i++)
sel[i] = (char *)G_calloc(2, sizeof(char));
back:
ask_group(sel);
/* check for no input */
if (sel[0][0] != 'x' && sel[1][0] != 'x' && sel[2][0] != 'x' &&
sel[3][0] != 'x' && sel[4][0] != 'x' && sel[5][0] != 'x' &&
sel[6][0] != 'x' && sel[7][0] != 'x' && sel[8][0] != 'x') {
G_system("clear");
fprintf(stderr,
" Did you mean to not make any attribute group");
if (!G_yes("\n or index class setup choices? ", 1))
goto back;
}
/* if there is input, then invoke the
group/class setup module and then free
the memory allocated for selections */
else {
get_group_drv(sel);
for (i = 0; i < 9; i++)
G_free(sel[i]);
G_free(sel);
}
}
/* change color tables */
else if (method == 6)
change_color(name, name1, name2);
/* reset the colortable and exit */
else if (method == 7) {
Rast_write_colors(name, G_mapset(), colors_old);
Rast_free_colors(colors_old);
/* R_close_driver(); */
G_system("d.frame -e");
exit(0);
}
paint = 0;
goto again;
return;
}
int close_array_seg(void)
{
struct Colors colors;
int incr, max, red, green, blue, rd, gr, bl, flag;
int c, r, map_fd;
CELL *cellrow, value;
CELL *theseg;
RAMSEG thesegseg;
cellrow = Rast_allocate_c_buf();
if (seg_flag || bas_flag || haf_flag) {
if (seg_flag) {
theseg = bas;
thesegseg = bas_seg;
}
else if (bas_flag) {
theseg = bas;
thesegseg = bas_seg;
}
else {
theseg = haf;
thesegseg = haf_seg;
}
max = n_basins;
G_debug(1, "%d basins created", max);
Rast_init_colors(&colors);
if (max > 0)
Rast_make_random_colors(&colors, 1, max);
else {
G_warning(_("No basins were created. Verify threshold and region settings."));
Rast_make_random_colors(&colors, 1, 2);
}
if (max < 1000 && max > 0) {
Rast_set_c_color((CELL) 0, 0, 0, 0, &colors);
r = 1;
incr = 0;
while (incr >= 0) {
G_percent(r, max, 2);
for (gr = 130 + incr; gr <= 255; gr += 20) {
for (rd = 90 + incr; rd <= 255; rd += 30) {
for (bl = 90 + incr; bl <= 255; bl += 40) {
flag = 1;
while (flag) {
Rast_get_c_color(&r, &red, &green, &blue, &colors);
/* if existing rule is too dark then append a new
rule to override it */
if ((blue * .11 + red * .30 + green * .59) <
100) {
Rast_set_c_color(r, rd, gr, bl, &colors);
flag = 0;
}
if (++r > max) {
gr = rd = bl = 300;
flag = 0;
incr = -1;
}
}
}
}
}
if (incr >= 0) {
incr += 15;
if (incr > 120)
incr = 7;
}
}
G_percent(r - 1, max, 3); /* finish it */
}
else
G_debug(1,
"Too many subbasins to reasonably check for color brightness");
/* using the existing stack of while/for/for/for/while loops ... */
}
/* stream segments map */
if (seg_flag) {
map_fd = Rast_open_c_new(seg_name);
for (r = 0; r < nrows; r++) {
Rast_set_c_null_value(cellrow, ncols); /* reset row to all NULL */
for (c = 0; c < ncols; c++) {
value = FLAG_GET(swale, r, c);
if (value)
cellrow[c] = bas[SEG_INDEX(bas_seg, r, c)];
}
Rast_put_row(map_fd, cellrow, CELL_TYPE);
}
Rast_close(map_fd);
Rast_write_colors(seg_name, this_mapset, &colors);
}
/* basins map */
if (bas_flag) {
map_fd = Rast_open_c_new(bas_name);
for (r = 0; r < nrows; r++) {
for (c = 0; c < ncols; c++) {
cellrow[c] = bas[SEG_INDEX(bas_seg, r, c)];
if (cellrow[c] == 0)
Rast_set_c_null_value(cellrow + c, 1);
}
Rast_put_row(map_fd, cellrow, CELL_TYPE);
}
Rast_close(map_fd);
Rast_write_colors(bas_name, this_mapset, &colors);
}
/* half_basins map */
if (haf_flag) {
map_fd = Rast_open_c_new(haf_name);
for (r = 0; r < nrows; r++) {
for (c = 0; c < ncols; c++) {
cellrow[c] = haf[SEG_INDEX(haf_seg, r, c)];
if (cellrow[c] == 0)
Rast_set_c_null_value(cellrow + c, 1);
}
Rast_put_row(map_fd, cellrow, CELL_TYPE);
}
Rast_close(map_fd);
Rast_write_colors(haf_name, this_mapset, &colors);
}
if (seg_flag || bas_flag || haf_flag)
Rast_free_colors(&colors);
G_free(haf);
G_free(bas);
G_free(cellrow);
if (arm_flag)
fclose(fp);
close_maps();
return 0;
}
int exec_rectify(char *extension, char *interp_method, char *angle_map)
{
char *name;
char *mapset;
char *result;
char *type = "raster";
int n;
struct Colors colr;
struct Categories cats;
struct History hist;
int colr_ok, cats_ok;
long start_time, rectify_time;
double aver_z;
int elevfd;
struct cache *ebuffer;
G_debug(1, "Open elevation raster: ");
/* open elevation raster */
select_target_env();
G_set_window(&target_window);
G_debug(1, "target window: rs=%d cs=%d n=%f s=%f w=%f e=%f\n",
target_window.rows, target_window.cols, target_window.north,
target_window.south, target_window.west, target_window.east);
elevfd = Rast_open_old(elev_name, elev_mapset);
if (elevfd < 0) {
G_fatal_error(_("Could not open elevation raster"));
return 1;
}
ebuffer = readcell(elevfd, seg_mb_elev, 1);
select_target_env();
Rast_close(elevfd);
/* get an average elevation of the control points */
/* this is used only if target cells have no elevation */
get_aver_elev(&group.control_points, &aver_z);
G_message("-----------------------------------------------");
/* rectify each file */
for (n = 0; n < group.group_ref.nfiles; n++) {
if (!ref_list[n])
continue;
name = group.group_ref.file[n].name;
mapset = group.group_ref.file[n].mapset;
result =
G_malloc(strlen(group.group_ref.file[n].name) + strlen(extension) + 1);
strcpy(result, group.group_ref.file[n].name);
strcat(result, extension);
G_debug(2, "ORTHO RECTIFYING:");
G_debug(2, "NAME %s", name);
G_debug(2, "MAPSET %s", mapset);
G_debug(2, "RESULT %s", result);
G_debug(2, "select_current_env...");
select_current_env();
cats_ok = Rast_read_cats(name, mapset, &cats) >= 0;
colr_ok = Rast_read_colors(name, mapset, &colr) > 0;
/* Initialze History */
if (Rast_read_history(name, mapset, &hist) < 0)
Rast_short_history(result, type, &hist);
G_debug(2, "reading was fine...");
time(&start_time);
G_debug(2, "Starting the rectification...");
if (rectify(name, mapset, ebuffer, aver_z, result, interp_method)) {
G_debug(2, "Done. Writing results...");
select_target_env();
if (cats_ok) {
Rast_write_cats(result, &cats);
Rast_free_cats(&cats);
}
if (colr_ok) {
Rast_write_colors(result, G_mapset(), &colr);
Rast_free_colors(&colr);
}
/* Write out History */
Rast_command_history(&hist);
Rast_write_history(result, &hist);
select_current_env();
time(&rectify_time);
report(rectify_time - start_time, 1);
}
else
report((long)0, 0);
G_free(result);
}
close(ebuffer->fd);
release_cache(ebuffer);
if (angle_map) {
camera_angle(angle_map);
}
return 0;
}
int main(int argc, char *argv[])
{
char *name, *outfile;
int fd, projection;
FILE *fp;
double res;
char *null_string;
char ebuf[256], nbuf[256], label[512], formatbuff[256];
char b1[100], b2[100];
int n;
int havefirst = FALSE;
int coords = 0, i, k = -1;
double e1, e2, n1, n2;
RASTER_MAP_TYPE data_type;
struct Cell_head window;
struct
{
struct Option *opt1, *profile, *res, *output, *null_str;
struct Flag *g, *c;
}
parm;
struct GModule *module;
G_gisinit(argv[0]);
/* Set description */
module = G_define_module();
G_add_keyword(_("raster"));
G_add_keyword(_("profile"));
module->description =
_("Outputs the raster map layer values lying on user-defined line(s).");
parm.opt1 = G_define_standard_option(G_OPT_R_INPUT);
parm.output = G_define_option();
parm.output->key = "output";
parm.output->type = TYPE_STRING;
parm.output->required = NO;
parm.output->answer = "-";
parm.output->gisprompt = "new_file,file,output";
parm.output->description =
_("Name of file for output (use output=- for stdout)");
parm.profile = G_define_option();
parm.profile->key = "profile";
parm.profile->type = TYPE_STRING;
parm.profile->required = NO;
parm.profile->multiple = YES;
parm.profile->key_desc = "east,north";
parm.profile->description = _("Profile coordinate pairs");
parm.res = G_define_option();
parm.res->key = "res";
parm.res->type = TYPE_DOUBLE;
parm.res->required = NO;
parm.res->description =
_("Resolution along profile (default = current region resolution)");
parm.null_str = G_define_option();
parm.null_str->key = "null";
parm.null_str->type = TYPE_STRING;
parm.null_str->required = NO;
parm.null_str->answer = "*";
parm.null_str->description = _("Character to represent no data cell");
parm.g = G_define_flag();
parm.g->key = 'g';
parm.g->description =
_("Output easting and northing in first two columns of four column output");
parm.c = G_define_flag();
parm.c->key = 'c';
parm.c->description =
_("Output RRR:GGG:BBB color values for each profile point");
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
clr = 0;
if (parm.c->answer)
clr = 1; /* color output */
null_string = parm.null_str->answer;
G_get_window(&window);
projection = G_projection();
if (parm.res->answer) {
res = atof(parm.res->answer);
/* Catch bad resolution ? */
if (res <= 0)
G_fatal_error(_("Illegal resolution! [%g]"), res);
}
else {
/* Do average of EW and NS res */
res = (window.ew_res + window.ns_res) / 2;
}
G_message(_("Using resolution [%g]"), res);
G_begin_distance_calculations();
/* Open Input File for reading */
/* Get Input Name */
name = parm.opt1->answer;
if (parm.g->answer)
coords = 1;
/* Open Raster File */
fd = Rast_open_old(name, "");
/* initialize color structure */
if (clr)
Rast_read_colors(name, "", &colors);
/* Open ASCII file for output or stdout */
outfile = parm.output->answer;
if ((strcmp("-", outfile)) == 0) {
fp = stdout;
}
else if (NULL == (fp = fopen(outfile, "w")))
G_fatal_error(_("Unable to open file <%s>"), outfile);
/* Get Raster Type */
data_type = Rast_get_map_type(fd);
/* Done with file */
/* Show message giving output format */
G_message(_("Output Format:"));
if (coords == 1)
sprintf(formatbuff,
_("[Easting] [Northing] [Along Track Dist.(m)] [Elevation]"));
else
sprintf(formatbuff, _("[Along Track Dist.(m)] [Elevation]"));
if (clr)
strcat(formatbuff, _(" [RGB Color]"));
G_message(formatbuff);
/* Get Profile Start Coords */
if (!parm.profile->answer) {
/* Assume input from stdin */
for (n = 1; input(b1, ebuf, b2, nbuf, label); n++) {
G_debug(4, "stdin line %d: ebuf=[%s] nbuf=[%s]", n, ebuf, nbuf);
if (!G_scan_easting(ebuf, &e2, G_projection()) ||
!G_scan_northing(nbuf, &n2, G_projection()))
G_fatal_error(_("Invalid coordinates %s %s"), ebuf, nbuf);
if (havefirst)
do_profile(e1, e2, n1, n2, name, coords, res, fd, data_type,
fp, null_string);
e1 = e2;
n1 = n2;
havefirst = TRUE;
}
}
else {
/* Coords from Command Line */
for (i = 0; parm.profile->answers[i]; i += 2) {
/* Test for number coordinate pairs */
k = i;
}
if (k == 0) {
/* Only one coordinate pair supplied */
G_scan_easting(parm.profile->answers[0], &e1, G_projection());
G_scan_northing(parm.profile->answers[1], &n1, G_projection());
e2 = e1;
n2 = n1;
/* Get profile info */
do_profile(e1, e2, n1, n2, name, coords, res, fd, data_type, fp,
null_string);
}
else {
for (i = 0; i <= k - 2; i += 2) {
G_scan_easting(parm.profile->answers[i], &e1, G_projection());
G_scan_northing(parm.profile->answers[i + 1], &n1,
G_projection());
G_scan_easting(parm.profile->answers[i + 2], &e2,
G_projection());
G_scan_northing(parm.profile->answers[i + 3], &n2,
G_projection());
/* Get profile info */
do_profile(e1, e2, n1, n2, name, coords, res, fd, data_type,
fp, null_string);
}
}
}
Rast_close(fd);
fclose(fp);
if (clr)
Rast_free_colors(&colors);
exit(EXIT_SUCCESS);
} /* Done with main */
