/*
** ===================================================================
** Method : PE_low_level_init (component MK20DX128EX5)
**
** Description :
** Initializes beans and provides common register initialization.
** The method is called automatically as a part of the
** application initialization code.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void PE_low_level_init(void)
{
#ifdef PEX_RTOS_INIT
PEX_RTOS_INIT(); /* Initialization of the selected RTOS. Macro is defined by the RTOS component. */
#endif
/* Initialization of the SIM module */
/* PORTA_PCR4: ISF=0,MUX=7 */
PORTA_PCR4 = (uint32_t)((PORTA_PCR4 & (uint32_t)~(uint32_t)(
PORT_PCR_ISF_MASK
)) | (uint32_t)(
PORT_PCR_MUX(0x07)
));
/* Initialization of the RCM module */
/* RCM_RPFW: RSTFLTSEL=0 */
RCM_RPFW &= (uint8_t)~(uint8_t)(RCM_RPFW_RSTFLTSEL(0x1F));
/* RCM_RPFC: RSTFLTSS=0,RSTFLTSRW=0 */
RCM_RPFC &= (uint8_t)~(uint8_t)(
RCM_RPFC_RSTFLTSS_MASK |
RCM_RPFC_RSTFLTSRW(0x03)
);
/* Initialization of the FTFL_FlashConfig module */
/* Initialization of the PMC module */
/* PMC_REGSC: ACKISO=0,BGBE=0 */
PMC_REGSC &= (uint8_t)~(uint8_t)(
PMC_REGSC_ACKISO_MASK |
PMC_REGSC_BGBE_MASK
);
/* PMC_LVDSC1: LVDACK=1,LVDIE=0,LVDRE=1,LVDV=0 */
PMC_LVDSC1 = (uint8_t)((PMC_LVDSC1 & (uint8_t)~(uint8_t)(
PMC_LVDSC1_LVDIE_MASK |
PMC_LVDSC1_LVDV(0x03)
)) | (uint8_t)(
PMC_LVDSC1_LVDACK_MASK |
PMC_LVDSC1_LVDRE_MASK
));
/* PMC_LVDSC2: LVWACK=1,LVWIE=0,LVWV=0 */
PMC_LVDSC2 = (uint8_t)((PMC_LVDSC2 & (uint8_t)~(uint8_t)(
PMC_LVDSC2_LVWIE_MASK |
PMC_LVDSC2_LVWV(0x03)
)) | (uint8_t)(
PMC_LVDSC2_LVWACK_MASK
));
/* SMC_PMPROT: ??=0,??=0,AVLP=0,??=0,ALLS=0,??=0,AVLLS=0,??=0 */
SMC_PMPROT = 0x00U; /* Setup Power mode protection register */
/* Common initialization of the CPU registers */
/* NVICIP8: PRI8=0 */
NVICIP8 = NVIC_IP_PRI8(0x00);
/* SCB_SHPR2: PRI_11=0 */
SCB_SHPR2 &= (uint32_t)~(uint32_t)(SCB_SHPR2_PRI_11(0xFF));
/* ### Asynchro serial "AS1" init code ... */
AS1_Init();
/* ### InternalI2C "CI2C0" init code ... */
CI2C0_Init();
/* ### Asynchro serial "AS0" init code ... */
AS0_Init();
/* ### SynchroMaster "SM1" init code ... */
SM1_Init();
/* Enable interrupts of the given priority level */
Cpu_SetBASEPRI(0U);
}
/*
** ===================================================================
** Method : PE_low_level_init (component MKL25Z128LK4)
**
** Description :
** Initializes beans and provides common register initialization.
** The method is called automatically as a part of the
** application initialization code.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void PE_low_level_init(void)
{
#ifdef PEX_RTOS_INIT
PEX_RTOS_INIT(); /* Initialization of the selected RTOS. Macro is defined by the RTOS component. */
#endif
/* Initialization of the SIM module */
/* PORTA_PCR4: ISF=0,MUX=7 */
PORTA_PCR4 = (uint32_t)((PORTA_PCR4 & (uint32_t)~(uint32_t)(
PORT_PCR_ISF_MASK
)) | (uint32_t)(
PORT_PCR_MUX(0x07)
));
/* Initialization of the RCM module */
/* RCM_RPFW: RSTFLTSEL=0 */
RCM_RPFW &= (uint8_t)~(uint8_t)(RCM_RPFW_RSTFLTSEL(0x1F));
/* RCM_RPFC: RSTFLTSS=0,RSTFLTSRW=0 */
RCM_RPFC &= (uint8_t)~(uint8_t)(
RCM_RPFC_RSTFLTSS_MASK |
RCM_RPFC_RSTFLTSRW(0x03)
);
/* Initialization of the FTFL_FlashConfig module */
/* Initialization of the PMC module */
/* PMC_LVDSC1: LVDACK=1,LVDIE=0,LVDRE=1,LVDV=0 */
PMC_LVDSC1 = (uint8_t)((PMC_LVDSC1 & (uint8_t)~(uint8_t)(
PMC_LVDSC1_LVDIE_MASK |
PMC_LVDSC1_LVDV(0x03)
)) | (uint8_t)(
PMC_LVDSC1_LVDACK_MASK |
PMC_LVDSC1_LVDRE_MASK
));
/* PMC_LVDSC2: LVWACK=1,LVWIE=0,LVWV=0 */
PMC_LVDSC2 = (uint8_t)((PMC_LVDSC2 & (uint8_t)~(uint8_t)(
PMC_LVDSC2_LVWIE_MASK |
PMC_LVDSC2_LVWV(0x03)
)) | (uint8_t)(
PMC_LVDSC2_LVWACK_MASK
));
/* PMC_REGSC: BGEN=0,ACKISO=0,BGBE=0 */
PMC_REGSC &= (uint8_t)~(uint8_t)(
PMC_REGSC_BGEN_MASK |
PMC_REGSC_ACKISO_MASK |
PMC_REGSC_BGBE_MASK
);
/* SMC_PMPROT: ??=0,??=0,AVLP=0,??=0,ALLS=0,??=0,AVLLS=0,??=0 */
SMC_PMPROT = 0x00U; /* Setup Power mode protection register */
/* Common initialization of the CPU registers */
/* PORTA_PCR20: ISF=0,MUX=7 */
PORTA_PCR20 = (uint32_t)((PORTA_PCR20 & (uint32_t)~(uint32_t)(
PORT_PCR_ISF_MASK
)) | (uint32_t)(
PORT_PCR_MUX(0x07)
));
/* NVIC_IPR1: PRI_6=0 */
NVIC_IPR1 &= (uint32_t)~(uint32_t)(NVIC_IP_PRI_6(0xFF));
/* SCB_SHPR2: PRI_11=0 */
SCB_SHPR2 &= (uint32_t)~(uint32_t)(SCB_SHPR2_PRI_11(0xFF));
/* SCB_SHPR3: PRI_14=0 */
SCB_SHPR3 &= (uint32_t)~(uint32_t)(SCB_SHPR3_PRI_14(0xFF));
/* ### FreeRTOS "FRTOS1" init code ... */
#if configSYSTICK_USE_LOW_POWER_TIMER
/* enable clocking for low power timer, otherwise vPortStopTickTimer() will crash */
SIM_PDD_SetClockGate(SIM_BASE_PTR, SIM_PDD_CLOCK_GATE_LPTMR0, PDD_ENABLE);
#endif
vPortStopTickTimer(); /* tick timer shall not run until the RTOS scheduler is started */
/* ### BitIO_LDD "BitIoLdd1" component auto initialization. Auto initialization feature can be disabled by component property "Auto initialization". */
(void)BitIoLdd1_Init(NULL);
/* ### LED "LEDR" init code ... */
LEDR_Init(); /* initializes the driver */
/* ### BitIO_LDD "BitIoLdd2" component auto initialization. Auto initialization feature can be disabled by component property "Auto initialization". */
(void)BitIoLdd2_Init(NULL);
/* ### LED "LEDB" init code ... */
LEDB_Init(); /* initializes the driver */
}
