void PL_EDITOR_FRAME::LoadSettings( wxConfigBase* aCfg )
{
EDA_DRAW_FRAME::LoadSettings( aCfg );
aCfg->Read( propertiesFrameWidthKey, &m_propertiesFrameWidth, 150);
aCfg->Read( cornerOriginChoiceKey, &m_originSelectChoice );
bool tmp;
aCfg->Read( blackBgColorKey, &tmp, false );
SetDrawBgColor( tmp ? BLACK : WHITE );
}
void LIB_VIEW_FRAME::LoadSettings( wxConfigBase* aCfg )
{
EDA_DRAW_FRAME::LoadSettings( aCfg );
SetGridColor( GetLayerColor( LAYER_GRID ) );
SetDrawBgColor( GetLayerColor( LAYER_BACKGROUND ) );
aCfg->Read( LIBLIST_WIDTH_KEY, &m_libListWidth, 150 );
aCfg->Read( CMPLIST_WIDTH_KEY, &m_cmpListWidth, 150 );
// Set parameters to a reasonable value.
if( m_libListWidth > m_FrameSize.x/2 )
m_libListWidth = m_FrameSize.x/2;
if( m_cmpListWidth > m_FrameSize.x/2 )
m_cmpListWidth = m_FrameSize.x/2;
}
void LIB_VIEW_FRAME::LoadSettings( wxConfigBase* aCfg )
{
EDA_DRAW_FRAME::LoadSettings( aCfg );
wxConfigPathChanger cpc( aCfg, m_configPath );
EDA_COLOR_T itmp = ColorByName( aCfg->Read( LIBVIEW_BGCOLOR, wxT( "WHITE" ) ) );
SetDrawBgColor( itmp );
aCfg->Read( LIBLIST_WIDTH_KEY, &m_libListWidth, 100 );
aCfg->Read( CMPLIST_WIDTH_KEY, &m_cmpListWidth, 100 );
// Set parameters to a reasonable value.
if( m_libListWidth > m_FrameSize.x/2 )
m_libListWidth = m_FrameSize.x/2;
if( m_cmpListWidth > m_FrameSize.x/2 )
m_cmpListWidth = m_FrameSize.x/2;
}
PL_EDITOR_FRAME::PL_EDITOR_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
EDA_DRAW_FRAME( aKiway, aParent, FRAME_PL_EDITOR, wxT( "PlEditorFrame" ),
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, PL_EDITOR_FRAME_NAME )
{
m_UserUnits = MILLIMETRES;
m_zoomLevelCoeff = 290.0; // Adjusted to roughly displays zoom level = 1
// when the screen shows a 1:1 image
// obviously depends on the monitor,
// but this is an acceptable value
m_showAxis = false; // true to show X and Y axis on screen
m_showGridAxis = true;
m_showBorderAndTitleBlock = true; // true for reference drawings.
m_hotkeysDescrList = PlEditorHotkeysDescr;
m_originSelectChoice = 0;
SetDrawBgColor( WHITE ); // default value, user option (WHITE/BLACK)
WS_DATA_MODEL::GetTheInstance().m_EditMode = true;
SetShowPageLimits( true );
m_AboutTitle = "PlEditor";
m_propertiesFrameWidth = 200;
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_pagelayout_editor_xpm ) );
SetIcon( icon );
// Create GAL canvas
#ifdef __WXMAC__
// Cairo renderer doesn't handle Retina displays
m_canvasType = EDA_DRAW_PANEL_GAL::GAL_TYPE_OPENGL;
#else
m_canvasType = EDA_DRAW_PANEL_GAL::GAL_TYPE_CAIRO;
#endif
auto* drawPanel = new PL_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize,
GetGalDisplayOptions(), m_canvasType );
SetGalCanvas( drawPanel );
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
wxSize pageSizeIU = GetPageLayout().GetPageSettings().GetSizeIU();
SetScreen( new PL_EDITOR_SCREEN( pageSizeIU ) );
if( !GetScreen()->GridExists( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ) )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1MM - ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 );
setupTools();
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
wxWindow* stsbar = GetStatusBar();
int dims[] = {
// balance of status bar on far left is set to a default or whatever is left over.
-1,
// When using GetTextSize() remember the width of '1' is not the same
// as the width of '0' unless the font is fixed width, and it usually won't be.
// zoom:
GetTextSize( wxT( "Z 762000" ), stsbar ).x + 10,
// cursor coords
GetTextSize( wxT( "X 0234.567 Y 0234.567" ), stsbar ).x + 10,
// delta distances
GetTextSize( wxT( "dx 0234.567 dx 0234.567" ), stsbar ).x + 10,
// Coord origin (use the bigger message)
GetTextSize( _( "coord origin: Right Bottom page corner" ), stsbar ).x + 10,
// units display, Inches is bigger than mm
GetTextSize( _( "Inches" ), stsbar ).x + 10
};
SetStatusWidths( arrayDim( dims ), dims );
m_auimgr.SetManagedWindow( this );
m_auimgr.SetArtProvider( new EDA_DOCKART( this ) );
m_propertiesPagelayout = new PROPERTIES_FRAME( this );
// Horizontal items; layers 4 - 6
m_auimgr.AddPane( m_mainToolBar, EDA_PANE().HToolbar().Name( "MainToolbar" ).Top().Layer(6) );
m_auimgr.AddPane( m_messagePanel, EDA_PANE().Messages().Name( "MsgPanel" ).Bottom().Layer(6) );
// Vertical items; layers 1 - 3
m_auimgr.AddPane( m_drawToolBar, EDA_PANE().VToolbar().Name( "ToolsToolbar" ).Right().Layer(1) );
m_auimgr.AddPane( m_propertiesPagelayout, EDA_PANE().Palette().Name( "Props" ).Right().Layer(2)
.Caption( _( "Properties" ) ).MinSize( m_propertiesPagelayout->GetMinSize() )
.BestSize( m_propertiesFrameWidth, -1 ) );
m_auimgr.AddPane( m_canvas, EDA_PANE().Canvas().Name( "DrawFrame" ).Center() );
m_auimgr.AddPane( GetGalCanvas(), EDA_PANE().Canvas().Name( "DrawFrameGal" ).Center().Hide() );
// Set up viewport
KIGFX::VIEW* view = GetGalCanvas()->GetView();
view->SetScale( GetZoomLevelCoeff() / m_canvas->GetZoom() );
view->SetCenter( VECTOR2D( m_canvas->GetScreenCenterLogicalPosition() ) );
UseGalCanvas();
m_auimgr.Update();
// Initialize the current page layout
WS_DATA_MODEL& pglayout = WS_DATA_MODEL::GetTheInstance();
#if 0 //start with empty layout
pglayout.AllowVoidList( true );
pglayout.ClearList();
#else // start with the default Kicad layout
pglayout.SetPageLayout();
#endif
OnNewPageLayout();
}
PL_EDITOR_FRAME::PL_EDITOR_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
EDA_DRAW_FRAME( aKiway, aParent, FRAME_PL_EDITOR, wxT( "PlEditorFrame" ),
wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, PL_EDITOR_FRAME_NAME )
{
m_zoomLevelCoeff = 290.0; // Adjusted to roughly displays zoom level = 1
// when the screen shows a 1:1 image
// obviously depends on the monitor,
// but this is an acceptable value
m_showAxis = false; // true to show X and Y axis on screen
m_showGridAxis = true;
m_showBorderAndTitleBlock = true; // true for reference drawings.
m_hotkeysDescrList = PlEditorHokeysDescr;
m_originSelectChoice = 0;
SetDrawBgColor( WHITE ); // default value, user option (WHITE/BLACK)
SetShowPageLimits( true );
m_designTreeWidth = 150;
m_propertiesFrameWidth = 200;
if( m_canvas )
m_canvas->SetEnableBlockCommands( false );
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_pagelayout_editor_xpm ) );
SetIcon( icon );
wxSize pageSizeIU = GetPageLayout().GetPageSettings().GetSizeIU();
SetScreen( new PL_EDITOR_SCREEN( pageSizeIU ) );
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
if( ! GetScreen()->GridExists( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ) )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1MM - ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateOptToolbar();
wxWindow* stsbar = GetStatusBar();
int dims[] = {
// balance of status bar on far left is set to a default or whatever is left over.
-1,
// When using GetTextSize() remember the width of '1' is not the same
// as the width of '0' unless the font is fixed width, and it usually won't be.
// zoom:
GetTextSize( wxT( "Z 762000" ), stsbar ).x + 10,
// cursor coords
GetTextSize( wxT( "X 0234.567 Y 0234.567" ), stsbar ).x + 10,
// delta distances
GetTextSize( wxT( "dx 0234.567 dx 0234.567" ), stsbar ).x + 10,
// Coord origin (use the bigger message)
GetTextSize( _( "coord origin: Right Bottom page corner" ), stsbar ).x + 10,
// units display, Inches is bigger than mm
GetTextSize( _( "Inches" ), stsbar ).x + 10
};
SetStatusWidths( DIM( dims ), dims );
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
m_propertiesPagelayout = new PROPERTIES_FRAME( this );
EDA_PANEINFO props;
props.LayersToolbarPane();
props.MinSize( m_propertiesPagelayout->GetMinSize() );
props.BestSize( m_propertiesFrameWidth, -1 );
props.Caption( _( "Properties" ) );
m_treePagelayout = new DESIGN_TREE_FRAME( this );
EDA_PANEINFO tree;
tree.LayersToolbarPane();
tree.MinSize( m_treePagelayout->GetMinSize() );
tree.BestSize( m_designTreeWidth, -1 );
tree.Caption( _( "Design" ) );
if( m_mainToolBar )
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
if( m_drawToolBar )
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right().Row( 1 ) );
m_auimgr.AddPane( m_propertiesPagelayout,
props.Name( wxT( "m_propertiesPagelayout" ) ).Right().Layer( 1 ) );
m_auimgr.AddPane( m_treePagelayout,
tree.Name( wxT( "m_treePagelayout" ) ).Left().Layer( 0 ) );
if( m_optionsToolBar )
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
if( m_canvas )
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane().Layer( 5 ) );
if( m_messagePanel )
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer( 10 ) );
m_auimgr.Update();
// Initialize the current page layout
WORKSHEET_LAYOUT& pglayout = WORKSHEET_LAYOUT::GetTheInstance();
#if 0 //start with empty layout
pglayout.AllowVoidList( true );
pglayout.ClearList();
#else // start with the default Kicad layout
pglayout.SetPageLayout();
#endif
OnNewPageLayout();
}
void SCH_EDIT_FRAME::LoadSettings( wxConfigBase* aCfg )
{
EDA_DRAW_FRAME::LoadSettings( aCfg );
long tmp;
ReadHotkeyConfig( SCH_EDIT_FRAME_NAME, g_Schematic_Hokeys_Descr );
wxConfigLoadSetups( aCfg, GetConfigurationSettings() );
SetGridColor( GetLayerColor( LAYER_SCHEMATIC_GRID ) );
SetDrawBgColor( GetLayerColor( LAYER_SCHEMATIC_BACKGROUND ) );
SetDefaultBusThickness( aCfg->Read( DefaultBusWidthEntry, DEFAULTBUSTHICKNESS ) );
SetDefaultLineThickness( aCfg->Read( DefaultDrawLineWidthEntry, DEFAULTDRAWLINETHICKNESS ) );
aCfg->Read( ShowHiddenPinsEntry, &m_showAllPins, false );
aCfg->Read( HorzVertLinesOnlyEntry, &m_forceHVLines, true );
aCfg->Read( AutoplaceFieldsEntry, &m_autoplaceFields, true );
aCfg->Read( AutoplaceJustifyEntry, &m_autoplaceJustify, true );
aCfg->Read( AutoplaceAlignEntry, &m_autoplaceAlign, false );
aCfg->Read( FootprintPreviewEntry, &m_footprintPreview, false );
// Load print preview window session settings.
aCfg->Read( PreviewFramePositionXEntry, &tmp, -1 );
m_previewPosition.x = (int) tmp;
aCfg->Read( PreviewFramePositionYEntry, &tmp, -1 );
m_previewPosition.y = (int) tmp;
aCfg->Read( PreviewFrameWidthEntry, &tmp, -1 );
m_previewSize.SetWidth( (int) tmp );
aCfg->Read( PreviewFrameHeightEntry, &tmp, -1 );
m_previewSize.SetHeight( (int) tmp );
// Load print dialog session settings.
aCfg->Read( PrintDialogPositionXEntry, &tmp, -1 );
m_printDialogPosition.x = (int) tmp;
aCfg->Read( PrintDialogPositionYEntry, &tmp, -1 );
m_printDialogPosition.y = (int) tmp;
aCfg->Read( PrintDialogWidthEntry, &tmp, -1 );
m_printDialogSize.SetWidth( (int) tmp );
aCfg->Read( PrintDialogHeightEntry, &tmp, -1 );
m_printDialogSize.SetHeight( (int) tmp );
// Load netlists options:
aCfg->Read( SimulatorCommandEntry, &m_simulatorCommand );
// Load find dialog session setting.
aCfg->Read( FindDialogPositionXEntry, &tmp, -1 );
m_findDialogPosition.x = (int) tmp;
aCfg->Read( FindDialogPositionYEntry, &tmp, -1 );
m_findDialogPosition.y = (int) tmp;
aCfg->Read( FindDialogWidthEntry, &tmp, -1 );
m_findDialogSize.SetWidth( (int) tmp );
aCfg->Read( FindDialogHeightEntry, &tmp, -1 );
m_findDialogSize.SetHeight( (int) tmp );
wxASSERT_MSG( m_findReplaceData,
wxT( "Find dialog data settings object not created. Bad programmer!" ) );
aCfg->Read( FindReplaceFlagsEntry, &tmp, (long) wxFR_DOWN );
m_findReplaceData->SetFlags( (wxUint32) tmp & ~FR_REPLACE_ITEM_FOUND );
m_findReplaceData->SetFindString( aCfg->Read( FindStringEntry, wxEmptyString ) );
m_findReplaceData->SetReplaceString( aCfg->Read( ReplaceStringEntry, wxEmptyString ) );
// Load the find and replace string history list.
for( int i = 0; i < FR_HISTORY_LIST_CNT; ++i )
{
wxString tmpHistory;
wxString entry;
entry.Printf( FindStringHistoryEntry, i );
tmpHistory = aCfg->Read( entry, wxEmptyString );
if( !tmpHistory.IsEmpty() )
m_findStringHistoryList.Add( tmpHistory );
entry.Printf( ReplaceStringHistoryEntry, i );
tmpHistory = aCfg->Read( entry, wxEmptyString );
if( !tmpHistory.IsEmpty() )
m_replaceStringHistoryList.Add( tmpHistory );
}
wxString templateFieldNames = aCfg->Read( FieldNamesEntry, wxEmptyString );
if( !templateFieldNames.IsEmpty() )
{
TEMPLATE_FIELDNAMES_LEXER lexer( TO_UTF8( templateFieldNames ) );
try
{
m_TemplateFieldNames.Parse( &lexer );
}
catch( const IO_ERROR& DBG( e ) )
{
// @todo show error msg
DBG( printf( "templatefieldnames parsing error: '%s'\n",
TO_UTF8( e.What() ) ); )
}
}