void PCB_EDIT_FRAME::Start_Move_Zone_Outlines( wxDC* DC, ZONE_CONTAINER* aZone ) { // Show the Net if( aZone->IsOnCopperLayer() ) // Show the Net { if( GetBoard()->IsHighLightNetON() ) { HighLight( DC ); // Remove old highlight selection } ZONE_SETTINGS zoneInfo = GetZoneSettings(); zoneInfo.m_NetcodeSelection = aZone->GetNet(); SetZoneSettings( zoneInfo ); GetBoard()->SetHighLightNet( aZone->GetNet() ); HighLight( DC ); } s_PickedList.ClearListAndDeleteItems(); s_AuxiliaryList.ClearListAndDeleteItems(); SaveCopyOfZones( s_PickedList, GetBoard(), aZone->GetNet(), aZone->GetLayer() ); aZone->SetFlags( IS_MOVED ); m_canvas->SetMouseCapture( Show_Zone_Corner_Or_Outline_While_Move_Mouse, Abort_Zone_Move_Corner_Or_Outlines ); s_CursorLastPosition = s_CornerInitialPosition = GetScreen()->GetCrossHairPosition(); s_CornerIsNew = false; s_AddCutoutToCurrentZone = false; s_CurrentZone = NULL; }
int PCB_EDIT_FRAME::Fill_Zone( ZONE_CONTAINER* aZone ) { aZone->ClearFilledPolysList(); aZone->UnFill(); // Cannot fill keepout zones: if( aZone->GetIsKeepout() ) return 1; wxString msg; ClearMsgPanel(); // Shows the net ZONE_SETTINGS zoneInfo = GetZoneSettings(); zoneInfo.m_NetcodeSelection = aZone->GetNetCode(); SetZoneSettings( zoneInfo ); msg = aZone->GetNetname(); if( msg.IsEmpty() ) msg = wxT( "No net" ); AppendMsgPanel( _( "NetName" ), msg, RED ); wxBusyCursor dummy; // Shows an hourglass cursor (removed by its destructor) aZone->BuildFilledSolidAreasPolygons( GetBoard() ); GetGalCanvas()->GetView()->Update( aZone, KIGFX::ALL ); GetBoard()->GetRatsnest()->Update( aZone ); OnModify(); return 0; }
void PCB_EDIT_FRAME::Start_Move_Zone_Corner( wxDC* DC, ZONE_CONTAINER* aZone, int corner_id, bool IsNewCorner ) { if( aZone->IsOnCopperLayer() ) // Show the Net { if( GetBoard()->IsHighLightNetON() && DC ) { HighLight( DC ); // Remove old highlight selection } ZONE_SETTINGS zoneInfo = GetZoneSettings(); zoneInfo.m_NetcodeSelection = aZone->GetNet(); SetZoneSettings( zoneInfo ); GetBoard()->SetHighLightNet( aZone->GetNet() ); if( DC ) HighLight( DC ); } // Prepare copy of old zones, for undo/redo. // if the corner is new, remove it from list, save and insert it in list int cx = aZone->m_Poly->GetX( corner_id ); int cy = aZone->m_Poly->GetY( corner_id ); if ( IsNewCorner ) aZone->m_Poly->DeleteCorner( corner_id ); s_AuxiliaryList.ClearListAndDeleteItems(); s_PickedList.ClearListAndDeleteItems(); SaveCopyOfZones( s_PickedList, GetBoard(), aZone->GetNet(), aZone->GetLayer() ); if ( IsNewCorner ) aZone->m_Poly->InsertCorner(corner_id-1, cx, cy ); aZone->SetFlags( IN_EDIT ); m_canvas->SetMouseCapture( Show_Zone_Corner_Or_Outline_While_Move_Mouse, Abort_Zone_Move_Corner_Or_Outlines ); s_CornerInitialPosition = aZone->GetCornerPosition( corner_id ); s_CornerIsNew = IsNewCorner; s_AddCutoutToCurrentZone = false; s_CurrentZone = NULL; }
void PCB_EDIT_FRAME::Add_Zone_Cutout( wxDC* DC, ZONE_CONTAINER* aZone ) { if( !aZone ) return; s_AddCutoutToCurrentZone = true; s_CurrentZone = aZone; // set zones setup to the current zone ZONE_SETTINGS zoneInfo = GetZoneSettings(); zoneInfo << *aZone; SetZoneSettings( zoneInfo ); // Use the general event handle to set others params (like toolbar) wxCommandEvent evt; evt.SetId( aZone->GetIsKeepout() ? ID_PCB_KEEPOUT_AREA_BUTT : ID_PCB_ZONES_BUTT ); OnSelectTool( evt ); }
void PCB_EDIT_FRAME::Edit_Zone_Params( wxDC* DC, ZONE_CONTAINER* aZone ) { ZONE_EDIT_T edited; ZONE_SETTINGS zoneInfo = GetZoneSettings(); m_canvas->SetIgnoreMouseEvents( true ); // Save initial zones configuration, for undo/redo, before adding new zone // note the net name and the layer can be changed, so we must save all zones s_AuxiliaryList.ClearListAndDeleteItems(); s_PickedList.ClearListAndDeleteItems(); SaveCopyOfZones(s_PickedList, GetBoard(), -1, -1 ); if( aZone->GetIsKeepout() ) { // edit a keepout area on a copper layer zoneInfo << *aZone; edited = InvokeKeepoutAreaEditor( this, &zoneInfo ); } else if( aZone->GetLayer() < FIRST_NO_COPPER_LAYER ) { // edit a zone on a copper layer zoneInfo << *aZone; edited = InvokeCopperZonesEditor( this, &zoneInfo ); } else { edited = InvokeNonCopperZonesEditor( this, aZone, &zoneInfo ); } m_canvas->MoveCursorToCrossHair(); m_canvas->SetIgnoreMouseEvents( false ); if( edited == ZONE_ABORT ) { s_AuxiliaryList.ClearListAndDeleteItems(); s_PickedList.ClearListAndDeleteItems(); return; } SetZoneSettings( zoneInfo ); if( edited == ZONE_EXPORT_VALUES ) { UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() ); SaveCopyInUndoList(s_PickedList, UR_UNSPECIFIED); s_PickedList.ClearItemsList(); // s_ItemsListPicker is no more owner of picked items return; } // Undraw old zone outlines for( int ii = 0; ii < GetBoard()->GetAreaCount(); ii++ ) { ZONE_CONTAINER* edge_zone = GetBoard()->GetArea( ii ); edge_zone->Draw( m_canvas, DC, GR_XOR ); } zoneInfo.ExportSetting( *aZone ); NETINFO_ITEM* net = GetBoard()->FindNet( zoneInfo.m_NetcodeSelection ); if( net ) // net == NULL should not occur aZone->SetNetName( net->GetNetname() ); // Combine zones if possible GetBoard()->OnAreaPolygonModified( &s_AuxiliaryList, aZone ); // Redraw the real new zone outlines GetBoard()->RedrawAreasOutlines( m_canvas, DC, GR_OR, -1 ); UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() ); SaveCopyInUndoList(s_PickedList, UR_UNSPECIFIED); s_PickedList.ClearItemsList(); // s_ItemsListPicker is no longer owner of picked items OnModify(); }
int PCB_EDIT_FRAME::Begin_Zone( wxDC* DC ) { ZONE_SETTINGS zoneInfo = GetZoneSettings(); // verify if s_CurrentZone exists (could be deleted since last selection) : int ii; for( ii = 0; ii < GetBoard()->GetAreaCount(); ii++ ) { if( s_CurrentZone == GetBoard()->GetArea( ii ) ) break; } if( ii >= GetBoard()->GetAreaCount() ) // Not found: could be deleted since last selection { s_AddCutoutToCurrentZone = false; s_CurrentZone = NULL; } // If no zone contour in progress, a new zone is being created: if( !GetBoard()->m_CurrentZoneContour ) { if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT && getActiveLayer() >= FIRST_NON_COPPER_LAYER ) { DisplayError( this, _( "Error: a keepout area is allowed only on copper layers" ) ); return 0; } else GetBoard()->m_CurrentZoneContour = new ZONE_CONTAINER( GetBoard() ); } ZONE_CONTAINER* zone = GetBoard()->m_CurrentZoneContour; if( zone->GetNumCorners() == 0 ) // Start a new contour: init zone params (net, layer ...) { if( !s_CurrentZone ) // A new outline is created, from scratch { ZONE_EDIT_T edited; // Init zone params to reasonable values zone->SetLayer( getActiveLayer() ); // Prompt user for parameters: m_canvas->SetIgnoreMouseEvents( true ); if( zone->IsOnCopperLayer() ) { // Put a zone on a copper layer if( GetBoard()->GetHighLightNetCode() > 0 ) { zoneInfo.m_NetcodeSelection = GetBoard()->GetHighLightNetCode(); zone->SetNet( zoneInfo.m_NetcodeSelection ); zone->SetNetNameFromNetCode( ); } double tmp = ZONE_THERMAL_RELIEF_GAP_MIL; wxGetApp().GetSettings()->Read( ZONE_THERMAL_RELIEF_GAP_STRING_KEY, &tmp ); zoneInfo.m_ThermalReliefGap = KiROUND( tmp * IU_PER_MILS); tmp = ZONE_THERMAL_RELIEF_COPPER_WIDTH_MIL; wxGetApp().GetSettings()->Read( ZONE_THERMAL_RELIEF_COPPER_WIDTH_STRING_KEY, &tmp ); zoneInfo.m_ThermalReliefCopperBridge = KiROUND( tmp * IU_PER_MILS ); tmp = ZONE_CLEARANCE_MIL; wxGetApp().GetSettings()->Read( ZONE_CLEARANCE_WIDTH_STRING_KEY, &tmp ); zoneInfo.m_ZoneClearance = KiROUND( tmp * IU_PER_MILS ); tmp = ZONE_THICKNESS_MIL; wxGetApp().GetSettings()->Read( ZONE_MIN_THICKNESS_WIDTH_STRING_KEY, &tmp ); zoneInfo.m_ZoneMinThickness = KiROUND( tmp * IU_PER_MILS ); zoneInfo.m_CurrentZone_Layer = zone->GetLayer(); if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT ) { zoneInfo.SetIsKeepout( true ); edited = InvokeKeepoutAreaEditor( this, &zoneInfo ); } else { zoneInfo.SetIsKeepout( false ); edited = InvokeCopperZonesEditor( this, &zoneInfo ); } } else // Put a zone on a non copper layer (technical layer) { zoneInfo.SetIsKeepout( false ); zoneInfo.m_NetcodeSelection = 0; // No net for non copper zones edited = InvokeNonCopperZonesEditor( this, zone, &zoneInfo ); } m_canvas->MoveCursorToCrossHair(); m_canvas->SetIgnoreMouseEvents( false ); if( edited == ZONE_ABORT ) return 0; // Switch active layer to the selected zone layer setActiveLayer( zoneInfo.m_CurrentZone_Layer ); SetZoneSettings( zoneInfo ); } else { // Start a new contour: init zone params (net and layer) from an existing // zone (add cutout or similar zone) zoneInfo.m_CurrentZone_Layer = s_CurrentZone->GetLayer(); setActiveLayer( s_CurrentZone->GetLayer() ); zoneInfo << *s_CurrentZone; SetZoneSettings( zoneInfo ); } // Show the Net for zones on copper layers if( zoneInfo.m_CurrentZone_Layer < FIRST_NO_COPPER_LAYER && ! zoneInfo.GetIsKeepout() ) { if( s_CurrentZone ) { zoneInfo.m_NetcodeSelection = s_CurrentZone->GetNet(); GetBoard()->SetZoneSettings( zoneInfo ); } if( GetBoard()->IsHighLightNetON() ) { HighLight( DC ); // Remove old highlight selection } GetBoard()->SetHighLightNet( zoneInfo.m_NetcodeSelection ); HighLight( DC ); } if( !s_AddCutoutToCurrentZone ) s_CurrentZone = NULL; // the zone is used only once ("add similar zone" command) } // if first segment if( zone->GetNumCorners() == 0 ) { zone->SetFlags( IS_NEW ); zone->SetTimeStamp( GetNewTimeStamp() ); zoneInfo.ExportSetting( *zone ); zone->m_Poly->Start( zoneInfo.m_CurrentZone_Layer, GetScreen()->GetCrossHairPosition().x, GetScreen()->GetCrossHairPosition().y, zone->GetHatchStyle() ); zone->AppendCorner( GetScreen()->GetCrossHairPosition() ); if( Drc_On && (m_drc->Drc( zone, 0 ) == BAD_DRC) && zone->IsOnCopperLayer() ) { zone->ClearFlags(); zone->RemoveAllContours(); // use the form of SetCurItem() which does not write to the msg panel, // SCREEN::SetCurItem(), so the DRC error remains on screen. // PCB_EDIT_FRAME::SetCurItem() calls DisplayInfo(). GetScreen()->SetCurItem( NULL ); DisplayError( this, _( "DRC error: this start point is inside or too close an other area" ) ); return 0; } SetCurItem( zone ); m_canvas->SetMouseCapture( Show_New_Edge_While_Move_Mouse, Abort_Zone_Create_Outline ); } else // edge in progress: { ii = zone->GetNumCorners() - 1; // edge in progress : the current corner coordinate was set // by Show_New_Edge_While_Move_Mouse if( zone->GetCornerPosition( ii - 1 ) != zone->GetCornerPosition( ii ) ) { if( !Drc_On || !zone->IsOnCopperLayer() || ( m_drc->Drc( zone, ii - 1 ) == OK_DRC ) ) { // Ok, we can add a new corner if( m_canvas->IsMouseCaptured() ) m_canvas->CallMouseCapture( DC, wxPoint(0,0), false ); zone->AppendCorner( GetScreen()->GetCrossHairPosition() ); SetCurItem( zone ); // calls DisplayInfo(). if( m_canvas->IsMouseCaptured() ) m_canvas->CallMouseCapture( DC, wxPoint(0,0), false ); } } } return zone->GetNumCorners(); }