EFI_STATUS
EFIAPI
UnlockFlashComponents (
IN EFI_SPI_PROTOCOL *This,
IN UINT8 UnlockCmdOpcodeIndex
)
/*++
Routine Description:
Issue unlock command to disable block protection, this only needs to be done once per SPI power on
Arguments:
This A pointer to "EFI_SPI_PROTOCOL" for issuing commands
UnlockCmdOpcodeIndex The index of the Unlock command
Returns:
EFI_SUCCESS UnLock operation succeed.
EFI_DEVICE_ERROR Device error, operation failed.
--*/
{
EFI_STATUS Status;
SPI_INSTANCE *SpiInstance;
UINT8 SpiStatus;
if (UnlockCmdOpcodeIndex >= SPI_NUM_OPCODE) {
return EFI_UNSUPPORTED;
}
SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
//
// Issue unlock command to disable block protection, this only needs to be done once per SPI power on
//
SpiStatus = 0;
//
// Issue unlock command to the flash component 1 at first
//
Status = SpiProtocolExecute (
This,
UnlockCmdOpcodeIndex,
SpiInstance->SpiInitTable.PrefixOpcode[0] == PCH_SPI_COMMAND_WRITE_ENABLE ? 0 : 1,
TRUE,
TRUE,
TRUE,
(UINTN) 0,
sizeof (SpiStatus),
&SpiStatus,
EnumSpiRegionAll
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Unlock flash component 1 fail!\n"));
return Status;
}
return EFI_SUCCESS;
}
EFI_STATUS
EFIAPI
SpiProtocolInit (
IN EFI_SPI_PROTOCOL *This,
IN SPI_INIT_TABLE *InitTable
)
/*++
Routine Description:
Initialize the host controller to execute SPI command.
Arguments:
This Pointer to the EFI_SPI_PROTOCOL instance.
InitTable Initialization data to be programmed into the SPI host controller.
Returns:
EFI_SUCCESS Initialization completed.
EFI_ACCESS_DENIED The SPI static configuration interface has been locked-down.
EFI_INVALID_PARAMETER Bad input parameters.
EFI_UNSUPPORTED Can't get Descriptor mode VSCC values
--*/
{
EFI_STATUS Status;
UINT8 Index;
UINT16 OpcodeType;
SPI_INSTANCE *SpiInstance;
BOOLEAN MultiPartitionIsSupported;
UINTN PchRootComplexBar;
UINT8 SFDPCmdOpcodeIndex;
UINT8 UnlockCmdOpcodeIndex;
UINT8 ReadDataCmdOpcodeIndex;
UINT8 FlashPartId[3];
SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
PchRootComplexBar = SpiInstance->PchRootComplexBar;
if (InitTable != NULL) {
//
// Copy table into SPI driver Private data structure
//
CopyMem (
&SpiInstance->SpiInitTable,
InitTable,
sizeof (SPI_INIT_TABLE)
);
} else {
return EFI_INVALID_PARAMETER;
}
//
// Check if the SPI interface has been locked-down.
//
if ((MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIS) & B_QNC_RCRB_SPIS_SCL) != 0) {
ASSERT_EFI_ERROR (EFI_ACCESS_DENIED);
return EFI_ACCESS_DENIED;
}
//
// Clear all the status bits for status regs.
//
MmioOr16 (
(UINTN) (PchRootComplexBar + R_QNC_RCRB_SPIS),
(UINT16) ((B_QNC_RCRB_SPIS_CDS | B_QNC_RCRB_SPIS_BAS))
);
MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIS);
//
// Set the Prefix Opcode registers.
//
MmioWrite16 (
PchRootComplexBar + R_QNC_RCRB_SPIPREOP,
(SpiInstance->SpiInitTable.PrefixOpcode[1] << 8) | InitTable->PrefixOpcode[0]
);
MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIPREOP);
//
// Set Opcode Type Configuration registers.
//
for (Index = 0, OpcodeType = 0; Index < SPI_NUM_OPCODE; Index++) {
switch (SpiInstance->SpiInitTable.OpcodeMenu[Index].Type) {
case EnumSpiOpcodeRead:
OpcodeType |= (UINT16) (B_QNC_RCRB_SPIOPTYPE_ADD_READ << (Index * 2));
break;
case EnumSpiOpcodeWrite:
OpcodeType |= (UINT16) (B_QNC_RCRB_SPIOPTYPE_ADD_WRITE << (Index * 2));
break;
case EnumSpiOpcodeWriteNoAddr:
OpcodeType |= (UINT16) (B_QNC_RCRB_SPIOPTYPE_NOADD_WRITE << (Index * 2));
break;
default:
OpcodeType |= (UINT16) (B_QNC_RCRB_SPIOPTYPE_NOADD_READ << (Index * 2));
break;
}
}
MmioWrite16 (PchRootComplexBar + R_QNC_RCRB_SPIOPTYPE, OpcodeType);
MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIOPTYPE);
//
// Setup the Opcode Menu registers.
//
ReadDataCmdOpcodeIndex = SPI_NUM_OPCODE;
SFDPCmdOpcodeIndex = SPI_NUM_OPCODE;
UnlockCmdOpcodeIndex = SPI_NUM_OPCODE;
for (Index = 0; Index < SPI_NUM_OPCODE; Index++) {
MmioWrite8 (
PchRootComplexBar + R_QNC_RCRB_SPIOPMENU + Index,
SpiInstance->SpiInitTable.OpcodeMenu[Index].Code
);
MmioRead8 (PchRootComplexBar + R_QNC_RCRB_SPIOPMENU + Index);
if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationJedecId) {
Status = SpiProtocolExecute (
This,
Index,
0,
TRUE,
TRUE,
FALSE,
(UINTN) 0,
3,
FlashPartId,
EnumSpiRegionDescriptor
);
if (EFI_ERROR (Status)) {
return Status;
}
if (FlashPartId[0] != SpiInstance->SpiInitTable.VendorId ||
FlashPartId[1] != SpiInstance->SpiInitTable.DeviceId0 ||
FlashPartId[2] != SpiInstance->SpiInitTable.DeviceId1) {
return EFI_INVALID_PARAMETER;
}
}
if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationReadData ||
SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationFastRead ||
SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationDualOutputFastRead) {
ReadDataCmdOpcodeIndex = Index;
}
if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationDiscoveryParameters) {
SFDPCmdOpcodeIndex = Index;
}
if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationWriteStatus) {
UnlockCmdOpcodeIndex = Index;
}
}
MultiPartitionIsSupported = FALSE;
Status = UnlockFlashComponents (
This,
UnlockCmdOpcodeIndex
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Unlock flash components fail!\n"));
}
SpiPhaseInit ();
FillOutPublicInfoStruct (SpiInstance);
SpiInstance->InitDone = TRUE;
return EFI_SUCCESS;
}
