LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType,
const wxString& aLibraryName ) :
SCH_BASE_FRAME( aKiway, aParent, aFrameType, _( "Symbol Library Browser" ),
wxDefaultPosition, wxDefaultSize,
aFrameType == FRAME_SCH_VIEWER_MODAL ? LIB_VIEW_STYLE_MODAL : LIB_VIEW_STYLE,
aFrameType == FRAME_SCH_VIEWER_MODAL ? LIB_VIEW_NAME_MODAL : LIB_VIEW_NAME ),
m_libList( nullptr ),
m_cmpList( nullptr ),
m_previewItem( nullptr )
{
wxASSERT( aFrameType == FRAME_SCH_VIEWER || aFrameType == FRAME_SCH_VIEWER_MODAL );
if( aFrameType == FRAME_SCH_VIEWER_MODAL )
SetModal( true );
// Force the frame name used in config. the lib viewer frame has a name
// depending on aFrameType (needed to identify the frame by wxWidgets),
// but only one configuration is preferable.
m_configFrameName = LIB_VIEW_NAME;
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( library_browse_xpm ) );
SetIcon( icon );
m_hotkeysDescrList = g_Viewlib_Hotkeys_Descr;
m_libListWidth = 200;
m_cmpListWidth = 300;
m_listPowerCmpOnly = false;
SetShowElectricalType( true );
// Initialize grid id to the default value (50 mils):
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
SetScreen( new SCH_SCREEN( aKiway ) );
GetScreen()->m_Center = true; // Axis origin centered on screen.
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
// Menu bar is not mandatory: uncomment/comment the next line
// to add/remove the menubar
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
m_libList = new wxListBox( this, ID_LIBVIEW_LIB_LIST, wxDefaultPosition, wxDefaultSize,
0, NULL, wxLB_HSCROLL | wxNO_BORDER );
m_cmpList = new wxListBox( this, ID_LIBVIEW_CMP_LIST, wxDefaultPosition, wxDefaultSize,
0, NULL, wxLB_HSCROLL | wxNO_BORDER );
if( aLibraryName.empty() )
{
ReCreateListLib();
}
else
{
m_libraryName = aLibraryName;
m_entryName.Clear();
m_unit = 1;
m_convert = 1;
}
m_selection_changed = false;
DisplayLibInfos();
m_auimgr.SetManagedWindow( this );
m_auimgr.SetArtProvider( new EDA_DOCKART( this ) );
// Manage main toolbar
m_auimgr.AddPane( m_mainToolBar, EDA_PANE().HToolbar().Name( "MainToolbar" ).Top().Layer(6) );
m_auimgr.AddPane( m_messagePanel, EDA_PANE().Messages().Name( "MsgPanel" ).Bottom().Layer(6) );
m_auimgr.AddPane( m_libList, EDA_PANE().Palette().Name( "Libraries" ).Left().Layer(3)
.CaptionVisible( false ).MinSize( 80, -1 ).BestSize( m_libListWidth, -1 ) );
m_auimgr.AddPane( m_cmpList, EDA_PANE().Palette().Name( "Symbols" ).Left().Layer(1)
.CaptionVisible( false ).MinSize( 80, -1 ).BestSize( m_cmpListWidth, -1 ) );
m_auimgr.AddPane( m_canvas->GetWindow(), EDA_PANE().Canvas().Name( "DrawFrame" ).Center() );
m_auimgr.GetPane( m_libList ).Show( aLibraryName.empty() );
m_auimgr.Update();
setupTools();
GetToolManager()->RunAction( "common.Control.gridPreset", true, m_LastGridSizeId );
GetToolManager()->RunAction( "common.Control.zoomFitScreen", true );
if( !IsModal() ) // For modal mode, calling ShowModal() will show this frame
{
Raise();
Show( true );
}
SyncView();
GetGalCanvas()->GetViewControls()->SetSnapping( true );
GetGalCanvas()->GetGAL()->SetAxesEnabled( true );
GetGalCanvas()->GetGAL()->SetGridVisibility( IsGridVisible() );
// Set the working/draw area size to display a symbol to a reasonable value:
// A 450mm x 450mm with a origin at the area center looks like a large working area
double max_size_x = Millimeter2iu( 450 );
double max_size_y = Millimeter2iu( 450 );
BOX2D bbox;
bbox.SetOrigin( -max_size_x /2, -max_size_y/2 );
bbox.SetSize( max_size_x, max_size_y );
GetCanvas()->GetView()->SetBoundary( bbox );
}
void SCH_EDIT_FRAME::DeleteAnnotation( bool aCurrentSheetOnly )
{
if( aCurrentSheetOnly )
{
SCH_SCREEN* screen = GetScreen();
wxCHECK_RET( screen != NULL, wxT( "Attempt to clear annotation of a NULL screen." ) );
screen->ClearAnnotation( m_CurrentSheet );
}
else
{
SCH_SCREENS ScreenList;
ScreenList.ClearAnnotation();
}
// Update the references for the sheet that is currently being displayed.
m_CurrentSheet->UpdateAllScreenReferences();
SyncView();
GetCanvas()->Refresh();
OnModify();
}
LIB_EDIT_FRAME::LIB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
SCH_BASE_FRAME( aKiway, aParent, FRAME_SCH_LIB_EDITOR, _( "Library Editor" ),
wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, LIB_EDIT_FRAME_NAME )
{
m_showAxis = true; // true to draw axis
SetShowDeMorgan( false );
m_DrawSpecificConvert = true;
m_DrawSpecificUnit = false;
m_hotkeysDescrList = g_Libedit_Hotkeys_Descr;
m_SyncPinEdit = false;
m_repeatPinStep = DEFAULT_REPEAT_OFFSET_PIN;
SetShowElectricalType( true );
m_FrameSize = ConvertDialogToPixels( wxSize( 500, 350 ) ); // default in case of no prefs
m_my_part = NULL;
m_treePane = nullptr;
m_libMgr = nullptr;
m_unit = 1;
m_convert = 1;
m_AboutTitle = "LibEdit";
// Delayed initialization
if( g_LastTextSize == -1 )
g_LastTextSize = GetDefaultTextSize();
// Initialize grid id to the default value 50 mils:
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_libedit_xpm ) );
SetIcon( icon );
LoadSettings( config() );
// Ensure axis are always drawn
KIGFX::GAL_DISPLAY_OPTIONS& gal_opts = GetGalDisplayOptions();
gal_opts.m_axesEnabled = true;
m_dummyScreen = new SCH_SCREEN( aKiway );
SetScreen( m_dummyScreen );
GetScreen()->m_Center = true;
GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax );
SetCrossHairPosition( wxPoint( 0, 0 ) );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
m_libMgr = new LIB_MANAGER( *this );
SyncLibraries( true );
m_treePane = new SYMBOL_TREE_PANE( this, m_libMgr );
setupTools();
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
updateTitle();
DisplayCmpDoc();
RebuildSymbolUnitsList();
m_auimgr.SetManagedWindow( this );
m_auimgr.SetArtProvider( new EDA_DOCKART( this ) );
m_auimgr.AddPane( m_mainToolBar, EDA_PANE().HToolbar().Name( "MainToolbar" ).Top().Layer(6) );
m_auimgr.AddPane( m_messagePanel, EDA_PANE().Messages().Name( "MsgPanel" ).Bottom().Layer(6) );
m_auimgr.AddPane( m_optionsToolBar, EDA_PANE().VToolbar().Name( "OptToolbar" ).Left().Layer(3) );
m_auimgr.AddPane( m_treePane, EDA_PANE().Palette().Name( "ComponentTree" ).Left().Layer(1)
.Caption( _( "Libraries" ) ).MinSize( 250, -1 )
.BestSize( m_defaultLibWidth, -1 ).Resizable() );
m_auimgr.AddPane( m_drawToolBar, EDA_PANE().VToolbar().Name( "ToolsToolbar" ).Right().Layer(1) );
m_auimgr.AddPane( m_canvas->GetWindow(), wxAuiPaneInfo().Name( "DrawFrame" ).CentrePane() );
m_auimgr.Update();
GetToolManager()->RunAction( "common.Control.gridPreset", true, m_LastGridSizeId );
Raise();
Show( true );
Bind( wxEVT_COMMAND_MENU_SELECTED, &LIB_EDIT_FRAME::OnConfigurePaths, this,
ID_PREFERENCES_CONFIGURE_PATHS );
Bind( wxEVT_COMMAND_MENU_SELECTED, &LIB_EDIT_FRAME::OnEditSymbolLibTable, this,
ID_EDIT_SYM_LIB_TABLE );
m_toolManager->RunAction( ACTIONS::zoomFitScreen, true );
SyncView();
GetGalCanvas()->GetViewControls()->SetSnapping( true );
GetGalCanvas()->GetView()->UseDrawPriority( true );
GetGalCanvas()->GetGAL()->SetGridVisibility( IsGridVisible() );
GetGalCanvas()->GetGAL()->SetAxesEnabled( true );
// Set the working/draw area size to display a symbol to a reasonable value:
// A 600mm x 600mm with a origin at the area center looks like a large working area
double max_size_x = Millimeter2iu( 600 );
double max_size_y = Millimeter2iu( 600 );
BOX2D bbox;
bbox.SetOrigin( -max_size_x /2, -max_size_y/2 );
bbox.SetSize( max_size_x, max_size_y );
GetCanvas()->GetView()->SetBoundary( bbox );
}
void SCH_EDIT_FRAME::AnnotateComponents( bool aAnnotateSchematic,
ANNOTATE_ORDER_T aSortOption,
ANNOTATE_OPTION_T aAlgoOption,
int aStartNumber,
bool aResetAnnotation,
bool aRepairTimestamps,
bool aLockUnits,
REPORTER& aReporter )
{
SCH_REFERENCE_LIST references;
SCH_SCREENS screens;
// Build the sheet list.
SCH_SHEET_LIST sheets( g_RootSheet );
// Map of locked components
SCH_MULTI_UNIT_REFERENCE_MAP lockedComponents;
// Map of previous annotation for building info messages
std::map<timestamp_t, wxString> previousAnnotation;
// Test for and replace duplicate time stamps in components and sheets. Duplicate
// time stamps can happen with old schematics, schematic conversions, or manual
// editing of files.
if( aRepairTimestamps )
{
int count = screens.ReplaceDuplicateTimeStamps();
if( count )
{
wxString msg;
msg.Printf( _( "%d duplicate time stamps were found and replaced." ), count );
aReporter.ReportTail( msg, REPORTER::RPT_WARNING );
}
}
// If units must be locked, collect all the sets that must be annotated together.
if( aLockUnits )
{
if( aAnnotateSchematic )
{
sheets.GetMultiUnitComponents( lockedComponents );
}
else
{
m_CurrentSheet->GetMultiUnitComponents( lockedComponents );
}
}
// Store previous annotations for building info messages
mapExistingAnnotation( previousAnnotation );
// If it is an annotation for all the components, reset previous annotation.
if( aResetAnnotation )
DeleteAnnotation( !aAnnotateSchematic );
// Set sheet number and number of sheets.
SetSheetNumberAndCount();
// Build component list
if( aAnnotateSchematic )
{
sheets.GetComponents( references );
}
else
{
m_CurrentSheet->GetComponents( references );
}
// Break full components reference in name (prefix) and number:
// example: IC1 become IC, and 1
references.SplitReferences();
switch( aSortOption )
{
default:
case SORT_BY_X_POSITION:
references.SortByXCoordinate();
break;
case SORT_BY_Y_POSITION:
references.SortByYCoordinate();
break;
}
bool useSheetNum = false;
int idStep = 100;
switch( aAlgoOption )
{
default:
case INCREMENTAL_BY_REF:
break;
case SHEET_NUMBER_X_100:
useSheetNum = true;
break;
case SHEET_NUMBER_X_1000:
useSheetNum = true;
idStep = 1000;
break;
}
// Recalculate and update reference numbers in schematic
references.Annotate( useSheetNum, idStep, aStartNumber, lockedComponents );
references.UpdateAnnotation();
for( size_t i = 0; i < references.GetCount(); i++ )
{
SCH_COMPONENT* comp = references[ i ].GetComp();
wxString prevRef = previousAnnotation[ comp->GetTimeStamp() ];
wxString newRef = comp->GetField( REFERENCE )->GetFullyQualifiedText();
wxString msg;
if( prevRef.Length() )
{
if( newRef == prevRef )
continue;
if( comp->GetUnitCount() > 1 )
msg.Printf( _( "Updated %s (unit %s) from %s to %s" ),
GetChars( comp->GetField( VALUE )->GetShownText() ),
LIB_PART::SubReference( comp->GetUnit(), false ),
GetChars( prevRef ),
GetChars( newRef ) );
else
msg.Printf( _( "Updated %s from %s to %s" ),
GetChars( comp->GetField( VALUE )->GetShownText() ),
GetChars( prevRef ),
GetChars( newRef ) );
}
else
{
if( comp->GetUnitCount() > 1 )
msg.Printf( _( "Annotated %s (unit %s) as %s" ),
GetChars( comp->GetField( VALUE )->GetShownText() ),
LIB_PART::SubReference( comp->GetUnit(), false ),
GetChars( newRef ) );
else
msg.Printf( _( "Annotated %s as %s" ),
GetChars( comp->GetField( VALUE )->GetShownText() ),
GetChars( newRef ) );
}
aReporter.Report( msg, REPORTER::RPT_ACTION );
}
// Final control (just in case ... ).
if( !CheckAnnotate( aReporter, !aAnnotateSchematic ) )
aReporter.ReportTail( _( "Annotation complete." ), REPORTER::RPT_ACTION );
// Update on screen references, that can be modified by previous calculations:
m_CurrentSheet->UpdateAllScreenReferences();
SetSheetNumberAndCount();
SyncView();
GetCanvas()->Refresh();
OnModify();
}
