/*
* Read a strip of data from the file.
*/
tsize_t
TIFFReadRawStrip(TIFF* tif, tstrip_t strip, tdata_t buf, tsize_t size)
{
static const char module[] = "TIFFReadRawStrip";
TIFFDirectory *td = &tif->tif_dir;
tsize_t bytecount;
if (!TIFFCheckRead(tif, 0))
return ((tsize_t) -1);
if (strip >= td->td_nstrips) {
TIFFError(tif->tif_name, "%lu: Strip out of range, max %lu",
(unsigned long) strip, (unsigned long) td->td_nstrips);
return ((tsize_t) -1);
}
bytecount = td->td_stripbytecount[strip];
if (bytecount <= 0) {
TIFFError(tif->tif_name,
"%lu: Invalid strip byte count, strip %lu",
(unsigned long) bytecount, (unsigned long) strip);
return ((tsize_t) -1);
}
if (size != (tsize_t)-1 && size < bytecount)
bytecount = size;
return (TIFFReadRawStrip1(tif, strip, buf, bytecount, module));
}
/*
* Read a strip of data from the file.
*/
tmsize_t
TIFFReadRawStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size)
{
static const char module[] = "TIFFReadRawStrip";
TIFFDirectory *td = &tif->tif_dir;
uint64 bytecount;
tmsize_t bytecountm;
if (!TIFFCheckRead(tif, 0))
return ((tmsize_t)(-1));
if (strip >= td->td_nstrips) {
TIFFErrorExt(tif->tif_clientdata, module,
"%lu: Strip out of range, max %lu",
(unsigned long) strip,
(unsigned long) td->td_nstrips);
return ((tmsize_t)(-1));
}
if (tif->tif_flags&TIFF_NOREADRAW)
{
TIFFErrorExt(tif->tif_clientdata, module,
"Compression scheme does not support access to raw uncompressed data");
return ((tmsize_t)(-1));
}
bytecount = td->td_stripbytecount[strip];
if ((int64)bytecount <= 0) {
#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__))
TIFFErrorExt(tif->tif_clientdata, module,
"%I64u: Invalid strip byte count, strip %lu",
(unsigned __int64) bytecount,
(unsigned long) strip);
#else
TIFFErrorExt(tif->tif_clientdata, module,
"%llu: Invalid strip byte count, strip %lu",
(unsigned long long) bytecount,
(unsigned long) strip);
#endif
return ((tmsize_t)(-1));
}
bytecountm = (tmsize_t)bytecount;
if ((uint64)bytecountm!=bytecount) {
TIFFErrorExt(tif->tif_clientdata, module, "Integer overflow");
return ((tmsize_t)(-1));
}
if (size != (tmsize_t)(-1) && size < bytecountm)
bytecountm = size;
return (TIFFReadRawStrip1(tif, strip, buf, bytecountm, module));
}
/*
* Read a strip of data from the file.
*/
tsize_t
TIFFReadRawStrip(TIFF* tif, tstrip_t strip, tdata_t buf, tsize_t size)
{
static const char module[] = "TIFFReadRawStrip";
TIFFDirectory *td = &tif->tif_dir;
/*
* FIXME: butecount should have tsize_t type, but for now libtiff
* defines tsize_t as a signed 32-bit integer and we are losing
* ability to read arrays larger than 2^31 bytes. So we are using
* uint32 instead of tsize_t here.
*/
uint32 bytecount;
if (!TIFFCheckRead(tif, 0))
return ((tsize_t) -1);
if (strip >= td->td_nstrips) {
TIFFErrorExt(tif->tif_clientdata, tif->tif_name,
"%lu: Strip out of range, max %lu",
(unsigned long) strip,
(unsigned long) td->td_nstrips);
return ((tsize_t) -1);
}
if (tif->tif_flags&TIFF_NOREADRAW)
{
TIFFErrorExt(tif->tif_clientdata, tif->tif_name,
"Compression scheme does not support access to raw uncompressed data");
return ((tsize_t) -1);
}
bytecount = td->td_stripbytecount[strip];
if (bytecount <= 0) {
TIFFErrorExt(tif->tif_clientdata, tif->tif_name,
"%lu: Invalid strip byte count, strip %lu",
(unsigned long) bytecount, (unsigned long) strip);
return ((tsize_t) -1);
}
if (size != (tsize_t)-1 && (uint32)size < bytecount)
bytecount = size;
return (TIFFReadRawStrip1(tif, strip, buf, bytecount, module));
}
/*
* Read a strip of data and decompress the specified
* amount into the user-supplied buffer.
*/
tmsize_t
TIFFReadEncodedStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size)
{
static const char module[] = "TIFFReadEncodedStrip";
TIFFDirectory *td = &tif->tif_dir;
tmsize_t stripsize;
uint16 plane;
stripsize=TIFFReadEncodedStripGetStripSize(tif, strip, &plane);
if (stripsize==((tmsize_t)(-1)))
return((tmsize_t)(-1));
/* shortcut to avoid an extra memcpy() */
if( td->td_compression == COMPRESSION_NONE &&
size!=(tmsize_t)(-1) && size >= stripsize &&
!isMapped(tif) &&
((tif->tif_flags&TIFF_NOREADRAW)==0) )
{
if (TIFFReadRawStrip1(tif, strip, buf, stripsize, module) != stripsize)
return ((tmsize_t)(-1));
if (!isFillOrder(tif, td->td_fillorder) &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits(buf,stripsize);
(*tif->tif_postdecode)(tif,buf,stripsize);
return (stripsize);
}
if ((size!=(tmsize_t)(-1))&&(size<stripsize))
stripsize=size;
if (!TIFFFillStrip(tif,strip))
return((tmsize_t)(-1));
if ((*tif->tif_decodestrip)(tif,buf,stripsize,plane)<=0)
return((tmsize_t)(-1));
(*tif->tif_postdecode)(tif,buf,stripsize);
return(stripsize);
}
/*
* Read the specified strip and setup for decoding.
* The data buffer is expanded, as necessary, to
* hold the strip's data.
*/
static int
TIFFFillStrip(TIFF* tif, tstrip_t strip)
{
static const char module[] = "TIFFFillStrip";
TIFFDirectory *td = &tif->tif_dir;
tsize_t bytecount;
bytecount = td->td_stripbytecount[strip];
if (isMapped(tif) &&
(td->td_fillorder == tif->tif_fillorder || (tif->tif_flags & TIFF_NOBITREV))) {
/*
* The image is mapped into memory and we either don't
* need to flip bits or the compression routine is going
* to handle this operation itself. In this case, avoid
* copying the raw data and instead just reference the
* data from the memory mapped file image. This assumes
* that the decompression routines do not modify the
* contents of the raw data buffer (if they try to,
* the application will get a fault since the file is
* mapped read-only).
*/
if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata)
_TIFFfree(tif->tif_rawdata);
tif->tif_flags &= ~TIFF_MYBUFFER;
if (td->td_stripoffset[strip] + bytecount > tif->tif_size) {
/*
* This error message might seem strange, but it's
* what would happen if a read were done instead.
*/
TIFFError(module, "%s: Read error on strip %lu",
tif->tif_name, (u_long) strip);
tif->tif_curstrip = -1; /* unknown state */
return (0);
}
tif->tif_rawdatasize = bytecount;
tif->tif_rawdata = tif->tif_base + td->td_stripoffset[strip];
} else {
/*
* Expand raw data buffer, if needed, to
* hold data strip coming from file
* (perhaps should set upper bound on
* the size of a buffer we'll use?).
*/
if (bytecount > tif->tif_rawdatasize) {
tif->tif_curstrip = -1; /* unknown state */
if ((tif->tif_flags & TIFF_MYBUFFER) == 0) {
TIFFError(module,
"%s: Data buffer too small to hold strip %lu",
tif->tif_name, (u_long) strip);
return (0);
}
if (!TIFFReadBufferSetup(tif, 0,
roundup(bytecount, 1024)))
return (0);
}
if (TIFFReadRawStrip1(tif, strip, (u_char *)tif->tif_rawdata,
bytecount, module) != bytecount)
return (0);
if (td->td_fillorder != tif->tif_fillorder &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits(tif->tif_rawdata, bytecount);
}
return (TIFFStartStrip(tif, strip));
}
/*
* Read the specified strip and setup for decoding. The data buffer is
* expanded, as necessary, to hold the strip's data.
*/
int
TIFFFillStrip(TIFF* tif, uint32 strip)
{
static const char module[] = "TIFFFillStrip";
TIFFDirectory *td = &tif->tif_dir;
if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount)
return 0;
if ((tif->tif_flags&TIFF_NOREADRAW)==0)
{
uint64 bytecount = td->td_stripbytecount[strip];
if ((int64)bytecount <= 0) {
#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__))
TIFFErrorExt(tif->tif_clientdata, module,
"Invalid strip byte count %I64u, strip %lu",
(unsigned __int64) bytecount,
(unsigned long) strip);
#else
TIFFErrorExt(tif->tif_clientdata, module,
"Invalid strip byte count %llu, strip %lu",
(unsigned long long) bytecount,
(unsigned long) strip);
#endif
return (0);
}
/* To avoid excessive memory allocations: */
/* Byte count should normally not be larger than a number of */
/* times the uncompressed size plus some margin */
if( bytecount > 1024 * 1024 )
{
/* 10 and 4096 are just values that could be adjusted. */
/* Hopefully they are safe enough for all codecs */
tmsize_t stripsize = TIFFStripSize(tif);
if( stripsize != 0 &&
(bytecount - 4096) / 10 > (uint64)stripsize )
{
uint64 newbytecount = (uint64)stripsize * 10 + 4096;
if( (int64)newbytecount >= 0 )
{
#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__))
TIFFWarningExt(tif->tif_clientdata, module,
"Too large strip byte count %I64u, strip %lu. Limiting to %I64u",
(unsigned __int64) bytecount,
(unsigned long) strip,
(unsigned __int64) newbytecount);
#else
TIFFErrorExt(tif->tif_clientdata, module,
"Too large strip byte count %llu, strip %lu. Limiting to %llu",
(unsigned long long) bytecount,
(unsigned long) strip,
(unsigned long long) newbytecount);
#endif
bytecount = newbytecount;
}
}
}
if (isMapped(tif)) {
/*
* We must check for overflow, potentially causing
* an OOB read. Instead of simple
*
* td->td_stripoffset[strip]+bytecount > tif->tif_size
*
* comparison (which can overflow) we do the following
* two comparisons:
*/
if (bytecount > (uint64)tif->tif_size ||
td->td_stripoffset[strip] > (uint64)tif->tif_size - bytecount) {
/*
* This error message might seem strange, but
* it's what would happen if a read were done
* instead.
*/
#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__))
TIFFErrorExt(tif->tif_clientdata, module,
"Read error on strip %lu; "
"got %I64u bytes, expected %I64u",
(unsigned long) strip,
(unsigned __int64) tif->tif_size - td->td_stripoffset[strip],
(unsigned __int64) bytecount);
#else
TIFFErrorExt(tif->tif_clientdata, module,
"Read error on strip %lu; "
"got %llu bytes, expected %llu",
(unsigned long) strip,
(unsigned long long) tif->tif_size - td->td_stripoffset[strip],
(unsigned long long) bytecount);
#endif
tif->tif_curstrip = NOSTRIP;
return (0);
}
}
if (isMapped(tif) &&
(isFillOrder(tif, td->td_fillorder)
|| (tif->tif_flags & TIFF_NOBITREV))) {
/*
* The image is mapped into memory and we either don't
* need to flip bits or the compression routine is
* going to handle this operation itself. In this
* case, avoid copying the raw data and instead just
* reference the data from the memory mapped file
* image. This assumes that the decompression
* routines do not modify the contents of the raw data
* buffer (if they try to, the application will get a
* fault since the file is mapped read-only).
*/
if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) {
_TIFFfree(tif->tif_rawdata);
tif->tif_rawdata = NULL;
tif->tif_rawdatasize = 0;
}
tif->tif_flags &= ~TIFF_MYBUFFER;
tif->tif_rawdatasize = (tmsize_t)bytecount;
tif->tif_rawdata = tif->tif_base + (tmsize_t)td->td_stripoffset[strip];
tif->tif_rawdataoff = 0;
tif->tif_rawdataloaded = (tmsize_t) bytecount;
/*
* When we have tif_rawdata reference directly into the memory mapped file
* we need to be pretty careful about how we use the rawdata. It is not
* a general purpose working buffer as it normally otherwise is. So we
* keep track of this fact to avoid using it improperly.
*/
tif->tif_flags |= TIFF_BUFFERMMAP;
} else {
/*
* Expand raw data buffer, if needed, to hold data
* strip coming from file (perhaps should set upper
* bound on the size of a buffer we'll use?).
*/
tmsize_t bytecountm;
bytecountm=(tmsize_t)bytecount;
if ((uint64)bytecountm!=bytecount)
{
TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow");
return(0);
}
if (bytecountm > tif->tif_rawdatasize) {
tif->tif_curstrip = NOSTRIP;
if ((tif->tif_flags & TIFF_MYBUFFER) == 0) {
TIFFErrorExt(tif->tif_clientdata, module,
"Data buffer too small to hold strip %lu",
(unsigned long) strip);
return (0);
}
}
if (tif->tif_flags&TIFF_BUFFERMMAP) {
tif->tif_curstrip = NOSTRIP;
tif->tif_rawdata = NULL;
tif->tif_rawdatasize = 0;
tif->tif_flags &= ~TIFF_BUFFERMMAP;
}
if( isMapped(tif) )
{
if (bytecountm > tif->tif_rawdatasize &&
!TIFFReadBufferSetup(tif, 0, bytecountm))
{
return (0);
}
if (TIFFReadRawStrip1(tif, strip, tif->tif_rawdata,
bytecountm, module) != bytecountm)
{
return (0);
}
}
else
{
if (TIFFReadRawStripOrTile2(tif, strip, 1,
bytecountm, module) != bytecountm)
{
return (0);
}
}
tif->tif_rawdataoff = 0;
tif->tif_rawdataloaded = bytecountm;
if (!isFillOrder(tif, td->td_fillorder) &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits(tif->tif_rawdata, bytecountm);
}
}
return (TIFFStartStrip(tif, strip));
}
/*
* Read the specified strip and setup for decoding. The data buffer is
* expanded, as necessary, to hold the strip's data.
*/
int
TIFFFillStrip(TIFF* tif, tstrip_t strip)
{
static const char module[] = "TIFFFillStrip";
TIFFDirectory *td = &tif->tif_dir;
if ((tif->tif_flags&TIFF_NOREADRAW)==0)
{
/*
* FIXME: butecount should have tsize_t type, but for now
* libtiff defines tsize_t as a signed 32-bit integer and we
* are losing ability to read arrays larger than 2^31 bytes.
* So we are using uint32 instead of tsize_t here.
*/
uint32 bytecount = td->td_stripbytecount[strip];
if (bytecount <= 0) {
TIFFErrorExt(tif->tif_clientdata, module,
"%s: Invalid strip byte count %lu, strip %lu",
tif->tif_name, (unsigned long) bytecount,
(unsigned long) strip);
return (0);
}
if (isMapped(tif) &&
(isFillOrder(tif, td->td_fillorder)
|| (tif->tif_flags & TIFF_NOBITREV))) {
/*
* The image is mapped into memory and we either don't
* need to flip bits or the compression routine is
* going to handle this operation itself. In this
* case, avoid copying the raw data and instead just
* reference the data from the memory mapped file
* image. This assumes that the decompression
* routines do not modify the contents of the raw data
* buffer (if they try to, the application will get a
* fault since the file is mapped read-only).
*/
if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata)
_TIFFfree(tif->tif_rawdata);
tif->tif_flags &= ~TIFF_MYBUFFER;
/*
* We must check for overflow, potentially causing
* an OOB read. Instead of simple
*
* td->td_stripoffset[strip]+bytecount > tif->tif_size
*
* comparison (which can overflow) we do the following
* two comparisons:
*/
if (bytecount > tif->tif_size ||
td->td_stripoffset[strip] > tif->tif_size - bytecount) {
/*
* This error message might seem strange, but
* it's what would happen if a read were done
* instead.
*/
TIFFErrorExt(tif->tif_clientdata, module,
"%s: Read error on strip %lu; "
"got %lu bytes, expected %lu",
tif->tif_name, (unsigned long) strip,
(unsigned long) tif->tif_size - td->td_stripoffset[strip],
(unsigned long) bytecount);
tif->tif_curstrip = NOSTRIP;
return (0);
}
tif->tif_rawdatasize = bytecount;
tif->tif_rawdata = tif->tif_base + td->td_stripoffset[strip];
} else {
/*
* Expand raw data buffer, if needed, to hold data
* strip coming from file (perhaps should set upper
* bound on the size of a buffer we'll use?).
*/
if (bytecount > (uint32)tif->tif_rawdatasize) {
tif->tif_curstrip = NOSTRIP;
if ((tif->tif_flags & TIFF_MYBUFFER) == 0) {
TIFFErrorExt(tif->tif_clientdata,
module,
"%s: Data buffer too small to hold strip %lu",
tif->tif_name,
(unsigned long) strip);
return (0);
}
if (!TIFFReadBufferSetup(tif, 0,
TIFFroundup(bytecount, 1024)))
return (0);
}
if ((uint32)TIFFReadRawStrip1(tif, strip,
(unsigned char *)tif->tif_rawdata,
bytecount, module) != bytecount)
return (0);
if (!isFillOrder(tif, td->td_fillorder) &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits(tif->tif_rawdata, bytecount);
}
}
return (TIFFStartStrip(tif, strip));
}
/*
* Read the specified strip and setup for decoding. The data buffer is
* expanded, as necessary, to hold the strip's data.
*/
int
TIFFFillStrip(TIFF* tif, uint32 strip)
{
static const char module[] = "TIFFFillStrip";
TIFFDirectory *td = &tif->tif_dir;
if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount)
return 0;
if ((tif->tif_flags&TIFF_NOREADRAW)==0)
{
uint64 bytecount = td->td_stripbytecount[strip];
if ((int64)bytecount <= 0) {
TIFFErrorExt(tif->tif_clientdata, module,
"Invalid strip byte count " TIFF_UINT64_FORMAT ", strip %lu",
(TIFF_UINT64_T) bytecount,
(unsigned long) strip);
return (0);
}
if (isMapped(tif) &&
(isFillOrder(tif, td->td_fillorder)
|| (tif->tif_flags & TIFF_NOBITREV))) {
/*
* The image is mapped into memory and we either don't
* need to flip bits or the compression routine is
* going to handle this operation itself. In this
* case, avoid copying the raw data and instead just
* reference the data from the memory mapped file
* image. This assumes that the decompression
* routines do not modify the contents of the raw data
* buffer (if they try to, the application will get a
* fault since the file is mapped read-only).
*/
if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) {
_TIFFfree(tif->tif_rawdata);
tif->tif_rawdata = NULL;
tif->tif_rawdatasize = 0;
}
tif->tif_flags &= ~TIFF_MYBUFFER;
/*
* We must check for overflow, potentially causing
* an OOB read. Instead of simple
*
* td->td_stripoffset[strip]+bytecount > tif->tif_size
*
* comparison (which can overflow) we do the following
* two comparisons:
*/
if (bytecount > (uint64)tif->tif_size ||
td->td_stripoffset[strip] > (uint64)tif->tif_size - bytecount) {
/*
* This error message might seem strange, but
* it's what would happen if a read were done
* instead.
*/
TIFFErrorExt(tif->tif_clientdata, module,
"Read error on strip %lu; "
"got " TIFF_UINT64_FORMAT " bytes, expected " TIFF_UINT64_FORMAT,
(unsigned long) strip,
(TIFF_UINT64_T) tif->tif_size - td->td_stripoffset[strip],
(TIFF_UINT64_T) bytecount);
tif->tif_curstrip = NOSTRIP;
return (0);
}
tif->tif_rawdatasize = (tmsize_t)bytecount;
tif->tif_rawdata = tif->tif_base + (tmsize_t)td->td_stripoffset[strip];
tif->tif_rawdataoff = 0;
tif->tif_rawdataloaded = (tmsize_t) bytecount;
/*
* When we have tif_rawdata reference directly into the memory mapped file
* we need to be pretty careful about how we use the rawdata. It is not
* a general purpose working buffer as it normally otherwise is. So we
* keep track of this fact to avoid using it improperly.
*/
tif->tif_flags |= TIFF_BUFFERMMAP;
} else {
/*
* Expand raw data buffer, if needed, to hold data
* strip coming from file (perhaps should set upper
* bound on the size of a buffer we'll use?).
*/
tmsize_t bytecountm;
bytecountm=(tmsize_t)bytecount;
if ((uint64)bytecountm!=bytecount)
{
TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow");
return(0);
}
if (bytecountm > tif->tif_rawdatasize) {
tif->tif_curstrip = NOSTRIP;
if ((tif->tif_flags & TIFF_MYBUFFER) == 0) {
TIFFErrorExt(tif->tif_clientdata, module,
"Data buffer too small to hold strip %lu",
(unsigned long) strip);
return (0);
}
if (!TIFFReadBufferSetup(tif, 0, bytecountm))
return (0);
}
if (tif->tif_flags&TIFF_BUFFERMMAP) {
tif->tif_curstrip = NOSTRIP;
if (!TIFFReadBufferSetup(tif, 0, bytecountm))
return (0);
}
if (TIFFReadRawStrip1(tif, strip, tif->tif_rawdata,
bytecountm, module) != bytecountm)
return (0);
tif->tif_rawdataoff = 0;
tif->tif_rawdataloaded = bytecountm;
if (!isFillOrder(tif, td->td_fillorder) &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits(tif->tif_rawdata, bytecountm);
}
}
return (TIFFStartStrip(tif, strip));
}
/*
* Read the specified strip and setup for decoding. The data buffer is
* expanded, as necessary, to hold the strip's data.
*/
int
TIFFFillStrip(TIFF* tif, uint32 strip)
{
static const char module[] = "TIFFFillStrip";
TIFFDirectory *td = &tif->tif_dir;
_TIFFFillStriles( tif );
if ((tif->tif_flags&TIFF_NOREADRAW)==0)
{
uint64 bytecount = td->td_stripbytecount[strip];
if (bytecount <= 0) {
#if defined(__WIN32__) && defined(_MSC_VER)
TIFFErrorExt(tif->tif_clientdata, module,
"Invalid strip byte count %I64u, strip %lu",
(unsigned __int64) bytecount,
(unsigned long) strip);
#else
TIFFErrorExt(tif->tif_clientdata, module,
"Invalid strip byte count %llu, strip %lu",
(unsigned long long) bytecount,
(unsigned long) strip);
#endif
return (0);
}
if (isMapped(tif) &&
(isFillOrder(tif, td->td_fillorder)
|| (tif->tif_flags & TIFF_NOBITREV))) {
/*
* The image is mapped into memory and we either don't
* need to flip bits or the compression routine is
* going to handle this operation itself. In this
* case, avoid copying the raw data and instead just
* reference the data from the memory mapped file
* image. This assumes that the decompression
* routines do not modify the contents of the raw data
* buffer (if they try to, the application will get a
* fault since the file is mapped read-only).
*/
if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata)
_TIFFfree(tif->tif_rawdata);
tif->tif_flags &= ~TIFF_MYBUFFER;
/*
* We must check for overflow, potentially causing
* an OOB read. Instead of simple
*
* td->td_stripoffset[strip]+bytecount > tif->tif_size
*
* comparison (which can overflow) we do the following
* two comparisons:
*/
if (bytecount > (uint64)tif->tif_size ||
td->td_stripoffset[strip] > (uint64)tif->tif_size - bytecount) {
/*
* This error message might seem strange, but
* it's what would happen if a read were done
* instead.
*/
#if defined(__WIN32__) && defined(_MSC_VER)
TIFFErrorExt(tif->tif_clientdata, module,
"Read error on strip %lu; "
"got %I64u bytes, expected %I64u",
(unsigned long) strip,
(unsigned __int64) tif->tif_size - td->td_stripoffset[strip],
(unsigned __int64) bytecount);
#else
TIFFErrorExt(tif->tif_clientdata, module,
"Read error on strip %lu; "
"got %llu bytes, expected %llu",
(unsigned long) strip,
(unsigned long long) tif->tif_size - td->td_stripoffset[strip],
(unsigned long long) bytecount);
#endif
tif->tif_curstrip = NOSTRIP;
return (0);
}
tif->tif_rawdatasize = (tmsize_t)bytecount;
tif->tif_rawdata = tif->tif_base + (tmsize_t)td->td_stripoffset[strip];
tif->tif_rawdataoff = 0;
tif->tif_rawdataloaded = (tmsize_t) bytecount;
} else {
/*
* Expand raw data buffer, if needed, to hold data
* strip coming from file (perhaps should set upper
* bound on the size of a buffer we'll use?).
*/
tmsize_t bytecountm;
bytecountm=(tmsize_t)bytecount;
if ((uint64)bytecountm!=bytecount)
{
TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow");
return(0);
}
if (bytecountm > tif->tif_rawdatasize) {
tif->tif_curstrip = NOSTRIP;
if ((tif->tif_flags & TIFF_MYBUFFER) == 0) {
TIFFErrorExt(tif->tif_clientdata, module,
"Data buffer too small to hold strip %lu",
(unsigned long) strip);
return (0);
}
if (!TIFFReadBufferSetup(tif, 0, bytecountm))
return (0);
}
if (TIFFReadRawStrip1(tif, strip, tif->tif_rawdata,
bytecountm, module) != bytecountm)
return (0);
tif->tif_rawdataoff = 0;
tif->tif_rawdataloaded = bytecountm;
if (!isFillOrder(tif, td->td_fillorder) &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits(tif->tif_rawdata, bytecountm);
}
}
return (TIFFStartStrip(tif, strip));
}
/*
* Read a strip of data and decompress the specified
* amount into the user-supplied buffer.
*/
tmsize_t
TIFFReadEncodedStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size)
{
static const char module[] = "TIFFReadEncodedStrip";
TIFFDirectory *td = &tif->tif_dir;
uint32 rowsperstrip;
uint32 stripsperplane;
uint32 stripinplane;
uint16 plane;
uint32 rows;
tmsize_t stripsize;
if (!TIFFCheckRead(tif,0))
return((tmsize_t)(-1));
if (strip>=td->td_nstrips)
{
TIFFErrorExt(tif->tif_clientdata,module,
"%lu: Strip out of range, max %lu",(unsigned long)strip,
(unsigned long)td->td_nstrips);
return((tmsize_t)(-1));
}
/*
* Calculate the strip size according to the number of
* rows in the strip (check for truncated last strip on any
* of the separations).
*/
rowsperstrip=td->td_rowsperstrip;
if (rowsperstrip>td->td_imagelength)
rowsperstrip=td->td_imagelength;
stripsperplane= TIFFhowmany_32_maxuint_compat(td->td_imagelength, rowsperstrip);
stripinplane=(strip%stripsperplane);
plane=(uint16)(strip/stripsperplane);
rows=td->td_imagelength-stripinplane*rowsperstrip;
if (rows>rowsperstrip)
rows=rowsperstrip;
stripsize=TIFFVStripSize(tif,rows);
if (stripsize==0)
return((tmsize_t)(-1));
/* shortcut to avoid an extra memcpy() */
if( td->td_compression == COMPRESSION_NONE &&
size!=(tmsize_t)(-1) && size >= stripsize &&
!isMapped(tif) &&
((tif->tif_flags&TIFF_NOREADRAW)==0) )
{
if (TIFFReadRawStrip1(tif, strip, buf, stripsize, module) != stripsize)
return ((tmsize_t)(-1));
if (!isFillOrder(tif, td->td_fillorder) &&
(tif->tif_flags & TIFF_NOBITREV) == 0)
TIFFReverseBits(buf,stripsize);
(*tif->tif_postdecode)(tif,buf,stripsize);
return (stripsize);
}
if ((size!=(tmsize_t)(-1))&&(size<stripsize))
stripsize=size;
if (!TIFFFillStrip(tif,strip))
return((tmsize_t)(-1));
if ((*tif->tif_decodestrip)(tif,buf,stripsize,plane)<=0)
return((tmsize_t)(-1));
(*tif->tif_postdecode)(tif,buf,stripsize);
return(stripsize);
}
