Пример #1
0
int main(void)
{
	uint8_t TWIS_ResponseType;


	init_modi();
	init_io_ports();
	init_timer();
	set_outputs();

	/*
	** Start TWI Slave with address 15 and bitrate of 100000 Hz
	*/
	TWIS_Init();

	/*
		mainloop - Kommunikation mit dem master
	*/
	while (1)
	{
		if (TWIS_ResponseRequired(&TWIS_ResponseType))
		{
			switch (TWIS_ResponseType)
			{
				/*
				** Slave is requested to read bytes from the master.
				*/
				case TW_SR_SLA_ACK:
				{
					outputdata.ports = TWIS_ReadAck();
					outputdata.ports += TWIS_ReadAck() << 8;
					uint8_t i;
					for (i = 0; i < PWM_CHAN - 1; i++)
						outputdata.pwmval[i] = TWIS_ReadAck();

					outputdata.pwmval[i] = TWIS_ReadNack();
					TWIS_Stop();                // I2C stop
					set_outputs();
				}
				break;
				/*
					** Slave is requested to send bytes from the master.
				*/
				case TW_ST_SLA_ACK:
					TWIS_Write(outputdata.ports);
					TWIS_Write(outputdata.ports >> 8);
					for (int read_p = 0; read_p < PWM_CHAN; read_p++)
						TWIS_Write(outputdata.pwmval[read_p]);
					TWIS_Stop();
					break;

				default:
					TWIS_Stop();
					break;
			}
		}
		wdt_reset();
	}
}
Пример #2
0
/* -------------------------------------------------------------------------
 * Main Funktion
 *
 * Initialisiert den Timer Interrupt und
 * behandelt die Laufschrift
 * -------------------------------------------------------------------------*/
int main(void)
{
	cli();                           // Interrupts sperren (damit keiner dazwischenfunkt)
    _delay_ms(50);                   // Wait for POR

	/*---------------------------------------------------
	 * Ports konfigurieren (Ein-/Ausgänge)
	 *---------------------------------------------------*/
	DDRC = 0x0f;   //  Portc = Output   ADC6 und ADC7 gehen nur fur Analog Messung!
	DDRB = 0xff;   //  Portb = Output
	DDRD = 0xff;   //  Portd = Output

	/*---------------------------------------------------------------------------
	 * 8-Bit Timer TCCR0 für das Multiplexing der LEDs initialisieren
	 * Es wird ca. alle 2 Millisekunden ein Overflow0 Interrupt ausgelöst
	 * Berechnung: T = Vorteiler * Wertebereich Zähler / Taktfreuenz
	 * = 64 * 256 / ( 8000000 Hz ) = 2,048 ms
	 *---------------------------------------------------------------------------*/
	TCCR0 |= (1<<CS01) | (1<<CS00);		// 8-bit Timer mit 1/64 Vorteiler
	TIFR |= (1<<TOV0); 					// Clear overflow flag (TOV0)
	TIMSK |= (1<<TOIE0); 				// timer0 will create overflow interrupt

    TWIS_Init (TWI_DISPLAY_ID, 100000);


	/*---------------------------------------------------
	 * Hauptschleife (Laufschrift erzeugen)
	 *---------------------------------------------------*/

    char buffer[3];
    uint8_t TWIS_ResponseType;

    showText("--");

    /* initialize display, cursor off */
    lcd_init(LCD_DISP_ON);

    /* clear display and home cursor */
    lcd_clrscr();

    lcd_puts("Servu\ns");

	sei();							    // Interrupts erlauben

    uint8_t mainScore=0;
    uint8_t slaveScore=0;
    uint8_t mainToServe=0;
    uint8_t mainGames=0;
    uint8_t slaveGames=0;

	while(1)                                              // Endlosschleife
	{
        if (TWIS_ResonseRequired (&TWIS_ResponseType)) {
            if (TWIS_ResponseType == TWIS_ReadBytes) {
                mainScore = TWIS_ReadAck();
                slaveScore = TWIS_ReadAck();
                mainGames = TWIS_ReadAck();
                slaveGames = TWIS_ReadAck();
                mainToServe = TWIS_ReadNack();  // The last Byte
                TWIS_Stop();

                // LCD Display
                lcd_clrscr();
                numberToString(mainScore, buffer);
                lcd_puts(buffer);
                if (buffer[1] == 0) {
                    lcd_puts(" "); // Formatierung bei nur 1 stellig
                }
                lcd_puts(mainToServe?"*":" ");
                numberToString(mainGames, buffer);
                lcd_puts(buffer);  // Saetze main

                lcd_puts("<\n>");

                numberToString(slaveScore, buffer);
                lcd_puts(buffer);
                if (buffer[1] == 0) {
                    lcd_puts(" "); // Formatierung bei nur 1 stellig
                }
                lcd_puts(mainToServe?" ":"*");
                numberToString(slaveGames, buffer);
                lcd_puts(buffer);  // Saetze slave

                // Led Display
                clearScreen();

                numberToString(slaveScore, buffer);
                showText(buffer);
                led_showGames(slaveGames);
                if (!mainToServe) {
                    led_showHaveToServ();
                }
            }
        }
	}
	return 0;
}