static void bcm_uart_do_rx(struct uart_port *port)
{
struct tty_struct *tty;
unsigned int max_count;
max_count = 32;
tty = port->state->port.tty;
do {
unsigned int iestat, c, cstat;
char flag;
iestat = bcm_uart_readl(port, UART_IR_REG);
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
break;
cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
port->icount.rx++;
flag = TTY_NORMAL;
c &= 0xff;
if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
if (cstat & UART_FIFO_BRKDET_MASK) {
port->icount.brk++;
if (uart_handle_break(port))
continue;
}
if (cstat & UART_FIFO_PARERR_MASK)
port->icount.parity++;
if (cstat & UART_FIFO_FRAMEERR_MASK)
port->icount.frame++;
cstat &= port->read_status_mask;
if (cstat & UART_FIFO_BRKDET_MASK)
flag = TTY_BREAK;
if (cstat & UART_FIFO_FRAMEERR_MASK)
flag = TTY_FRAME;
if (cstat & UART_FIFO_PARERR_MASK)
flag = TTY_PARITY;
}
if (uart_handle_sysrq_char(port, c))
continue;
if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
port->icount.overrun++;
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
if ((cstat & port->ignore_status_mask) == 0)
tty_insert_flip_char(tty, c, flag);
} while (--max_count);
tty_flip_buffer_push(tty);
}
/*
* serial core request to check if uart tx fifo is empty
*/
static unsigned int bcm_uart_tx_empty(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
}
/*
* read all chars in rx fifo and send them to core
*/
static void bcm_uart_do_rx(struct uart_port *port)
{
struct tty_struct *tty;
unsigned int max_count;
/* limit number of char read in interrupt, should not be
* higher than fifo size anyway since we're much faster than
* serial port */
max_count = 32;
tty = port->state->port.tty;
do {
unsigned int iestat, c, cstat;
char flag;
/* get overrun/fifo empty information from ier
* register */
iestat = bcm_uart_readl(port, UART_IR_REG);
if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
unsigned int val;
/* fifo reset is required to clear
* interrupt */
val = bcm_uart_readl(port, UART_CTL_REG);
val |= UART_CTL_RSTRXFIFO_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
port->icount.overrun++;
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
break;
cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
port->icount.rx++;
flag = TTY_NORMAL;
c &= 0xff;
if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
/* do stats first */
if (cstat & UART_FIFO_BRKDET_MASK) {
port->icount.brk++;
if (uart_handle_break(port))
continue;
}
if (cstat & UART_FIFO_PARERR_MASK)
port->icount.parity++;
if (cstat & UART_FIFO_FRAMEERR_MASK)
port->icount.frame++;
/* update flag wrt read_status_mask */
cstat &= port->read_status_mask;
if (cstat & UART_FIFO_BRKDET_MASK)
flag = TTY_BREAK;
if (cstat & UART_FIFO_FRAMEERR_MASK)
flag = TTY_FRAME;
if (cstat & UART_FIFO_PARERR_MASK)
flag = TTY_PARITY;
}
if (uart_handle_sysrq_char(port, c))
continue;
if ((cstat & port->ignore_status_mask) == 0)
tty_insert_flip_char(tty, c, flag);
} while (--max_count);
tty_flip_buffer_push(tty);
}
