/**
* USB CDC class request handler.
* This is an internal function.
*/
static void USB_VirtualCOM_HandleClassRequest() {
USB_SetupPacket_t setupPacket;
USBD_GetSetupPacket((uint8_t *) &setupPacket);
if(setupPacket.bmRequestType & 0x80) {
// Transfer direction: device to host
switch(setupPacket.bRequest) {
case USB_VCOM_REQ_GET_LINE_CODE:
if(setupPacket.wIndex == USB_VCOM_INDEX) {
// Copy line coding data to USB buffer
USBD_MemCopy((uint8_t *) (USBD_BUF_BASE + USB_VCOM_CTRL_IN_BUF_BASE),
(uint8_t *) &USB_VirtualCOM_lineCoding, USB_VirtualCOM_LineCoding_t_SIZE);
}
// Data stage
USBD_SET_DATA1(USB_VCOM_CTRL_IN_EP);
USBD_SET_PAYLOAD_LEN(USB_VCOM_CTRL_IN_EP, USB_VirtualCOM_LineCoding_t_SIZE);
// Status stage
USBD_PrepareCtrlOut(NULL, 0);
break;
default:
// Setup error, stall the device
USBD_SetStall(USB_VCOM_CTRL_IN_EP);
USBD_SetStall(USB_VCOM_CTRL_OUT_EP);
break;
}
}
else {
// Transfer direction: host to device
switch(setupPacket.bRequest) {
case USB_VCOM_REQ_SET_CONTROL_LINE_STATE:
// Control signals are ignored
// Status stage
USBD_SET_DATA1(USB_VCOM_CTRL_IN_EP);
USBD_SET_PAYLOAD_LEN(USB_VCOM_CTRL_IN_EP, 0);
break;
case USB_VCOM_REQ_SET_LINE_CODE:
if(setupPacket.wIndex == USB_VCOM_INDEX) {
// Prepare for line coding copy
USBD_PrepareCtrlOut((uint8_t *) &USB_VirtualCOM_lineCoding, USB_VirtualCOM_LineCoding_t_SIZE);
}
// Status stage
USBD_SET_DATA1(USB_VCOM_CTRL_IN_EP);
USBD_SET_PAYLOAD_LEN(USB_VCOM_CTRL_IN_EP, 0);
break;
default:
// Setup error, stall the device
USBD_SetStall(USB_VCOM_CTRL_IN_EP);
USBD_SetStall(USB_VCOM_CTRL_OUT_EP);
break;
}
}
}
void CCID_ClassRequest(void)
{
uint8_t buf[8];
USBD_GetSetupPacket(buf);
if (buf[0] & 0x80) /* request data transfer direction */
{
// Device to host
switch (buf[1])
{
case CCID_GET_CLOCK_FREQUENCIES:
case CCID_GET_DATA_RATES:
{
uint8_t pData[1] = {0};
USBD_MemCopy((uint8_t *)(USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0)), pData, sizeof(pData));
/* Data stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, sizeof(pData));
/* Status stage */
USBD_PrepareCtrlOut(0,0);
break;
}
default:
{
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
}
else
{
// Host to device
switch (buf[1])
{
case CCID_ABORT:
{
/* Status stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 0);
break;
}
default:
{
// Stall
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
}
}
void PTR_ClassRequest(void)
{
uint8_t buf[8];
USBD_GetSetupPacket(buf);
if (buf[0] & 0x80) { /* request data transfer direction */
// Device to host
switch (buf[1]) {
case GET_PORT_STATUS: {
/* Data stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 0);
/* Status stage */
USBD_PrepareCtrlOut(0,0);
break;
}
default: {
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
} else {
// Host to device
switch (buf[1]) {
case SET_REPORT: {
if (buf[3] == 3) {
/* Request Type = Feature */
USBD_SET_DATA1(EP1);
USBD_SET_PAYLOAD_LEN(EP1, 0);
}
break;
}
case SET_IDLE: {
/* Status stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 0);
break;
}
case SET_PROTOCOL:
// {
// break;
// }
default: {
// Stall
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
}
}
//=========================================================================
//----- (00002564) --------------------------------------------------------
__myevic__ void usbdClassRequest()
{
uint8_t token[8];
USBD_GetSetupPacket( token );
if ( ( token[0] & 0x1F ) == 1 )
{
if (( dfStatus.vcom ) && ( token[4] == VCOM_INTERFACE ))
{
VCOM_ClassRequest( token );
return;
}
if (( dfStatus.storage ) && ( token[4] == MSC_INTERFACE ))
{
MSC_ClassRequest( token );
return;
}
}
if( token[0] & 0x80 ) /* request data transfer direction */
{
// Device to host
switch ( token[1] )
{
case GET_REPORT:
case GET_IDLE:
case GET_PROTOCOL:
default:
{
/* Setup error, stall the device */
USBD_SetStall( EP0 );
USBD_SetStall( EP1 );
break;
}
}
}
else
{
// Host to device
switch ( token[1] )
{
case SET_REPORT:
{
if( token[3] == 3 )
{
/* Request Type = Feature */
USBD_SET_DATA1( EP1 );
USBD_SET_PAYLOAD_LEN( EP1, 0 );
}
break;
}
case SET_IDLE:
{
/* Status stage */
USBD_SET_DATA1( EP0 );
USBD_SET_PAYLOAD_LEN( EP0, 0 );
break;
}
case SET_PROTOCOL:
default:
{
// Stall
/* Setup error, stall the device */
USBD_SetStall( EP0 );
USBD_SetStall( EP1 );
break;
}
}
}
}
void HID_ClassRequest(void)
{
uint8_t buf[8];
USBD_GetSetupPacket(buf);
if (buf[0] & 0x80) /* request data transfer direction */
{
// Device to host
switch (buf[1])
{
case GET_LINE_CODE:
{
if (buf[4] == 0) /* VCOM-1 */
{
USBD_MemCopy((uint8_t *)(USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0)), (uint8_t *)&gLineCoding, 7);
}
/* Data stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 7);
/* Status stage */
USBD_PrepareCtrlOut(0,0);
break;
}
case GET_REPORT:
case GET_IDLE:
case GET_PROTOCOL:
default:
{
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
}
else
{
// Host to device
switch (buf[1])
{
case SET_CONTROL_LINE_STATE:
{
if (buf[4] == 0) /* VCOM-1 */
{
gCtrlSignal = buf[3];
gCtrlSignal = (gCtrlSignal << 8) | buf[2];
//printf("RTS=%d DTR=%d\n", (gCtrlSignal0 >> 1) & 1, gCtrlSignal0 & 1);
}
/* Status stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 0);
break;
}
case SET_LINE_CODE:
{
//g_usbd_UsbConfig = 0100;
if (buf[4] == 0) /* VCOM-1 */
USBD_PrepareCtrlOut((uint8_t *)&gLineCoding, 7);
/* Status stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 0);
// /* UART setting */
// if (buf[4] == 0) /* VCOM-1 */
// VCOM_LineCoding(0);
break;
}
case SET_REPORT:
{
if(buf[3] == 2)
{
/* Request Type = Output */
USBD_SET_DATA1(EP1);
USBD_SET_PAYLOAD_LEN(EP1, buf[6]);
/* Trigger for HID Int in */
USBD_SET_PAYLOAD_LEN(EP5, 0);
/* Status stage */
USBD_PrepareCtrlIn(0, 0);
}
break;
}
case SET_IDLE:
{
/* Status stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 0);
break;
}
case SET_PROTOCOL:
default:
{
// Stall
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
}
}
void HID_ClassRequest(void)
{
uint8_t buf[8];
USBD_GetSetupPacket(buf);
if(buf[0] & 0x80) /* request data transfer direction */
{
// Device to host
switch(buf[1])
{
case GET_REPORT:
// {
// break;
// }
case GET_IDLE:
// {
// break;
// }
case GET_PROTOCOL:
// {
// break;
// }
default:
{
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
}
else
{
// Host to device
switch(buf[1])
{
case SET_REPORT:
{
if(buf[3] == 3)
{
/* Request Type = Feature */
USBD_SET_DATA1(EP1);
USBD_SET_PAYLOAD_LEN(EP1, 0);
}
else if(buf[3] == 2)
{
/* Request Type = Output */
USBD_SET_DATA1(EP1);
USBD_SET_PAYLOAD_LEN(EP1, buf[6]);
/* Trigger for HID Int in */
USBD_SET_PAYLOAD_LEN(EP4, 0);
/* Status stage */
USBD_PrepareCtrlIn(0, 0);
}
break;
}
case SET_IDLE:
{
/* Status stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 0);
break;
}
case SET_PROTOCOL:
// {
// break;
// }
default:
{
// Stall
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
}
}
void MSC_ClassRequest(void)
{
uint8_t buf[8];
USBD_GetSetupPacket(buf);
if (buf[0] & 0x80) /* request data transfer direction */
{
// Device to host
switch (buf[1])
{
case GET_MAX_LUN:
{
/* Check interface number with cfg descriptor and check wValue = 0, wLength = 1 */
if ((((buf[3]<<8)+buf[2]) == 0) && (((buf[5]<<8)+buf[4]) == 0) && (((buf[7]<<8)+buf[6]) == 1))
{
M8(USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0)) = 0;
/* Data stage */
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 1);
/* Status stage */
USBD_PrepareCtrlOut(0,0);
}
else /* Invalid Get MaxLun command */
{
USBD_SetStall(0);
}
break;
}
default:
{
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
}
else
{
// Host to device
switch (buf[1])
{
case BULK_ONLY_MASS_STORAGE_RESET:
{
/* Check interface number with cfg descriptor and check wValue = 0, wLength = 0 */
if ((((buf[3]<<8)+buf[2]) == 0) && (((buf[5]<<8)+buf[4]) == 0) && (((buf[7]<<8)+buf[6]) == 0))
{
USBD_SET_DATA1(EP0);
USBD_SET_PAYLOAD_LEN(EP0, 0);
USBD_LockEpStall(0);
/* Clear ready */
USBD->EP[EP2].CFG |= USBD_CFG_CLRRDY_Msk;
USBD->EP[EP3].CFG |= USBD_CFG_CLRRDY_Msk;
/* Prepare to receive the CBW */
g_u8EP3Ready = 0;
g_u8BulkState = BULK_CBW;
USBD_SET_DATA1(EP3);
USBD_SET_EP_BUF_ADDR(EP3, g_u32BulkBuf0);
USBD_SET_PAYLOAD_LEN(EP3, EP3_MAX_PKT_SIZE);
}
else /* Invalid Reset command */
{
USBD_SetStall(0);
}
break;
}
default:
{
// Stall
/* Setup error, stall the device */
USBD_SetStall(0);
break;
}
}
}
}