static UBool getSystemTimeInformation(TimeZone *tz, SYSTEMTIME &daylightDate, SYSTEMTIME &standardDate, int32_t &bias, int32_t &daylightBias, int32_t &standardBias) {
UErrorCode status = U_ZERO_ERROR;
UBool result = TRUE;
BasicTimeZone *btz = (BasicTimeZone*)tz; // we should check type
InitialTimeZoneRule *initial = NULL;
AnnualTimeZoneRule *std = NULL, *dst = NULL;
btz->getSimpleRulesNear(uprv_getUTCtime(), initial, std, dst, status);
if (U_SUCCESS(status)) {
if (std == NULL || dst == NULL) {
bias = -1 * (initial->getRawOffset()/60000);
daylightBias = 0;
// Do not use DST. Set 0 to all stadardDate/daylightDate fields
standardDate.wYear = standardDate.wMonth = standardDate.wDayOfWeek = standardDate.wDay =
standardDate.wHour = standardDate.wMinute = standardDate.wSecond = standardDate.wMilliseconds = 0;
daylightDate.wYear = daylightDate.wMonth = daylightDate.wDayOfWeek = daylightDate.wDay =
daylightDate.wHour = daylightDate.wMinute = daylightDate.wSecond = daylightDate.wMilliseconds = 0;
} else {
U_ASSERT(std->getRule()->getDateRuleType() == DateTimeRule::DOW);
U_ASSERT(dst->getRule()->getDateRuleType() == DateTimeRule::DOW);
bias = -1 * (std->getRawOffset()/60000);
daylightBias = -1 * (dst->getDSTSavings()/60000);
// Always use DOW type rule
int32_t hour, min, sec, mil;
standardDate.wYear = 0;
standardDate.wMonth = std->getRule()->getRuleMonth() + 1;
standardDate.wDay = std->getRule()->getRuleWeekInMonth();
if (standardDate.wDay < 0) {
standardDate.wDay = 5;
}
standardDate.wDayOfWeek = std->getRule()->getRuleDayOfWeek() - 1;
mil = std->getRule()->getRuleMillisInDay();
hour = mil/3600000;
mil %= 3600000;
min = mil/60000;
mil %= 60000;
sec = mil/1000;
mil %= 1000;
standardDate.wHour = hour;
standardDate.wMinute = min;
standardDate.wSecond = sec;
standardDate.wMilliseconds = mil;
daylightDate.wYear = 0;
daylightDate.wMonth = dst->getRule()->getRuleMonth() + 1;
daylightDate.wDay = dst->getRule()->getRuleWeekInMonth();
if (daylightDate.wDay < 0) {
daylightDate.wDay = 5;
}
daylightDate.wDayOfWeek = dst->getRule()->getRuleDayOfWeek() - 1;
mil = dst->getRule()->getRuleMillisInDay();
hour = mil/3600000;
mil %= 3600000;
min = mil/60000;
mil %= 60000;
sec = mil/1000;
mil %= 1000;
daylightDate.wHour = hour;
daylightDate.wMinute = min;
daylightDate.wSecond = sec;
daylightDate.wMilliseconds = mil;
}
} else {
result = FALSE;
}
delete initial;
delete std;
delete dst;
return result;
}
UnicodeString&
TZGNCore::formatGenericNonLocationName(const TimeZone& tz, UTimeZoneGenericNameType type, UDate date, UnicodeString& name) const {
U_ASSERT(type == UTZGNM_LONG || type == UTZGNM_SHORT);
name.setToBogus();
const UChar* uID = ZoneMeta::getCanonicalCLDRID(tz);
if (uID == NULL) {
return name;
}
UnicodeString tzID(TRUE, uID, -1);
// Try to get a name from time zone first
UTimeZoneNameType nameType = (type == UTZGNM_LONG) ? UTZNM_LONG_GENERIC : UTZNM_SHORT_GENERIC;
fTimeZoneNames->getTimeZoneDisplayName(tzID, nameType, name);
if (!name.isEmpty()) {
return name;
}
// Try meta zone
UChar mzIDBuf[32];
UnicodeString mzID(mzIDBuf, 0, UPRV_LENGTHOF(mzIDBuf));
fTimeZoneNames->getMetaZoneID(tzID, date, mzID);
if (!mzID.isEmpty()) {
UErrorCode status = U_ZERO_ERROR;
UBool useStandard = FALSE;
int32_t raw, sav;
UChar tmpNameBuf[64];
tz.getOffset(date, FALSE, raw, sav, status);
if (U_FAILURE(status)) {
return name;
}
if (sav == 0) {
useStandard = TRUE;
TimeZone *tmptz = tz.clone();
// Check if the zone actually uses daylight saving time around the time
BasicTimeZone *btz = NULL;
if (dynamic_cast<OlsonTimeZone *>(tmptz) != NULL
|| dynamic_cast<SimpleTimeZone *>(tmptz) != NULL
|| dynamic_cast<RuleBasedTimeZone *>(tmptz) != NULL
|| dynamic_cast<VTimeZone *>(tmptz) != NULL) {
btz = (BasicTimeZone*)tmptz;
}
if (btz != NULL) {
TimeZoneTransition before;
UBool beforTrs = btz->getPreviousTransition(date, TRUE, before);
if (beforTrs
&& (date - before.getTime() < kDstCheckRange)
&& before.getFrom()->getDSTSavings() != 0) {
useStandard = FALSE;
} else {
TimeZoneTransition after;
UBool afterTrs = btz->getNextTransition(date, FALSE, after);
if (afterTrs
&& (after.getTime() - date < kDstCheckRange)
&& after.getTo()->getDSTSavings() != 0) {
useStandard = FALSE;
}
}
} else {
// If not BasicTimeZone... only if the instance is not an ICU's implementation.
// We may get a wrong answer in edge case, but it should practically work OK.
tmptz->getOffset(date - kDstCheckRange, FALSE, raw, sav, status);
if (sav != 0) {
useStandard = FALSE;
} else {
tmptz->getOffset(date + kDstCheckRange, FALSE, raw, sav, status);
if (sav != 0){
useStandard = FALSE;
}
}
if (U_FAILURE(status)) {
delete tmptz;
return name;
}
}
delete tmptz;
}
if (useStandard) {
UTimeZoneNameType stdNameType = (nameType == UTZNM_LONG_GENERIC)
? UTZNM_LONG_STANDARD : UTZNM_SHORT_STANDARD;
UnicodeString stdName(tmpNameBuf, 0, UPRV_LENGTHOF(tmpNameBuf));
fTimeZoneNames->getDisplayName(tzID, stdNameType, date, stdName);
if (!stdName.isEmpty()) {
name.setTo(stdName);
// TODO: revisit this issue later
// In CLDR, a same display name is used for both generic and standard
// for some meta zones in some locales. This looks like a data bugs.
// For now, we check if the standard name is different from its generic
// name below.
UChar genNameBuf[64];
UnicodeString mzGenericName(genNameBuf, 0, UPRV_LENGTHOF(genNameBuf));
fTimeZoneNames->getMetaZoneDisplayName(mzID, nameType, mzGenericName);
if (stdName.caseCompare(mzGenericName, 0) == 0) {
name.setToBogus();
}
}
}
if (name.isEmpty()) {
// Get a name from meta zone
UnicodeString mzName(tmpNameBuf, 0, UPRV_LENGTHOF(tmpNameBuf));
fTimeZoneNames->getMetaZoneDisplayName(mzID, nameType, mzName);
if (!mzName.isEmpty()) {
// Check if we need to use a partial location format.
// This check is done by comparing offset with the meta zone's
// golden zone at the given date.
UChar idBuf[32];
UnicodeString goldenID(idBuf, 0, UPRV_LENGTHOF(idBuf));
fTimeZoneNames->getReferenceZoneID(mzID, fTargetRegion, goldenID);
if (!goldenID.isEmpty() && goldenID != tzID) {
TimeZone *goldenZone = TimeZone::createTimeZone(goldenID);
int32_t raw1, sav1;
// Check offset in the golden zone with wall time.
// With getOffset(date, false, offsets1),
// you may get incorrect results because of time overlap at DST->STD
// transition.
goldenZone->getOffset(date + raw + sav, TRUE, raw1, sav1, status);
delete goldenZone;
if (U_SUCCESS(status)) {
if (raw != raw1 || sav != sav1) {
// Now we need to use a partial location format
getPartialLocationName(tzID, mzID, (nameType == UTZNM_LONG_GENERIC), mzName, name);
} else {
name.setTo(mzName);
}
}
} else {
name.setTo(mzName);
}
}
}
}
return name;
}
static int32_t
_internal_toUnicode(const UChar* src, int32_t srcLength,
UChar* dest, int32_t destCapacity,
int32_t options,
UStringPrepProfile* nameprep,
UParseError* parseError,
UErrorCode* status)
{
//get the options
//UBool useSTD3ASCIIRules = (UBool)((options & UIDNA_USE_STD3_RULES) != 0);
int32_t namePrepOptions = ((options & UIDNA_ALLOW_UNASSIGNED) != 0) ? USPREP_ALLOW_UNASSIGNED: 0;
// TODO Revisit buffer handling. The label should not be over 63 ASCII characters. ICU4J may need to be updated too.
UChar b1Stack[MAX_LABEL_BUFFER_SIZE], b2Stack[MAX_LABEL_BUFFER_SIZE], b3Stack[MAX_LABEL_BUFFER_SIZE];
//initialize pointers to stack buffers
UChar *b1 = b1Stack, *b2 = b2Stack, *b1Prime=NULL, *b3=b3Stack;
int32_t b1Len, b2Len, b1PrimeLen, b3Len,
b1Capacity = MAX_LABEL_BUFFER_SIZE,
b2Capacity = MAX_LABEL_BUFFER_SIZE,
b3Capacity = MAX_LABEL_BUFFER_SIZE,
reqLength=0;
b1Len = 0;
UBool* caseFlags = NULL;
UBool srcIsASCII = TRUE;
/*UBool srcIsLDH = TRUE;
int32_t failPos =0;*/
// step 1: find out if all the codepoints in src are ASCII
if(srcLength==-1){
srcLength = 0;
for(;src[srcLength]!=0;){
if(src[srcLength]> 0x7f){
srcIsASCII = FALSE;
}/*else if(isLDHChar(src[srcLength])==FALSE){
// here we do not assemble surrogates
// since we know that LDH code points
// are in the ASCII range only
srcIsLDH = FALSE;
failPos = srcLength;
}*/
srcLength++;
}
}else if(srcLength > 0){
for(int32_t j=0; j<srcLength; j++){
if(src[j]> 0x7f){
srcIsASCII = FALSE;
}/*else if(isLDHChar(src[j])==FALSE){
// here we do not assemble surrogates
// since we know that LDH code points
// are in the ASCII range only
srcIsLDH = FALSE;
failPos = j;
}*/
}
}else{
return 0;
}
if(srcIsASCII == FALSE){
// step 2: process the string
b1Len = usprep_prepare(nameprep, src, srcLength, b1, b1Capacity, namePrepOptions, parseError, status);
if(*status == U_BUFFER_OVERFLOW_ERROR){
// redo processing of string
/* we do not have enough room so grow the buffer*/
b1 = (UChar*) uprv_malloc(b1Len * U_SIZEOF_UCHAR);
if(b1==NULL){
*status = U_MEMORY_ALLOCATION_ERROR;
goto CLEANUP;
}
*status = U_ZERO_ERROR; // reset error
b1Len = usprep_prepare(nameprep, src, srcLength, b1, b1Len, namePrepOptions, parseError, status);
}
//bail out on error
if(U_FAILURE(*status)){
goto CLEANUP;
}
}else{
//just point src to b1
b1 = (UChar*) src;
b1Len = srcLength;
}
// The RFC states that
// <quote>
// ToUnicode never fails. If any step fails, then the original input
// is returned immediately in that step.
// </quote>
//step 3: verify ACE Prefix
if(startsWithPrefix(b1,b1Len)){
//step 4: Remove the ACE Prefix
b1Prime = b1 + ACE_PREFIX_LENGTH;
b1PrimeLen = b1Len - ACE_PREFIX_LENGTH;
//step 5: Decode using punycode
b2Len = u_strFromPunycode(b1Prime, b1PrimeLen, b2, b2Capacity, caseFlags,status);
if(*status == U_BUFFER_OVERFLOW_ERROR){
// redo processing of string
/* we do not have enough room so grow the buffer*/
b2 = (UChar*) uprv_malloc(b2Len * U_SIZEOF_UCHAR);
if(b2==NULL){
*status = U_MEMORY_ALLOCATION_ERROR;
goto CLEANUP;
}
*status = U_ZERO_ERROR; // reset error
b2Len = u_strFromPunycode(b1Prime, b1PrimeLen, b2, b2Len, caseFlags, status);
}
//step 6:Apply toASCII
b3Len = uidna_toASCII(b2, b2Len, b3, b3Capacity, options, parseError, status);
if(*status == U_BUFFER_OVERFLOW_ERROR){
// redo processing of string
/* we do not have enough room so grow the buffer*/
b3 = (UChar*) uprv_malloc(b3Len * U_SIZEOF_UCHAR);
if(b3==NULL){
*status = U_MEMORY_ALLOCATION_ERROR;
goto CLEANUP;
}
*status = U_ZERO_ERROR; // reset error
b3Len = uidna_toASCII(b2,b2Len,b3,b3Len,options,parseError, status);
}
//bail out on error
if(U_FAILURE(*status)){
goto CLEANUP;
}
//step 7: verify
if(compareCaseInsensitiveASCII(b1, b1Len, b3, b3Len) !=0){
// Cause the original to be returned.
*status = U_IDNA_VERIFICATION_ERROR;
goto CLEANUP;
}
//step 8: return output of step 5
reqLength = b2Len;
if(b2Len <= destCapacity) {
uprv_memmove(dest, b2, b2Len * U_SIZEOF_UCHAR);
}
}
else{
// See the start of this if statement for why this is commented out.
// verify that STD3 ASCII rules are satisfied
/*if(useSTD3ASCIIRules == TRUE){
if( srcIsLDH == FALSE // source contains some non-LDH characters
|| src[0] == HYPHEN || src[srcLength-1] == HYPHEN){
*status = U_IDNA_STD3_ASCII_RULES_ERROR;
// populate the parseError struct
if(srcIsLDH==FALSE){
// failPos is always set the index of failure
uprv_syntaxError(src,failPos, srcLength,parseError);
}else if(src[0] == HYPHEN){
// fail position is 0
uprv_syntaxError(src,0,srcLength,parseError);
}else{
// the last index in the source is always length-1
uprv_syntaxError(src, (srcLength>0) ? srcLength-1 : srcLength, srcLength,parseError);
}
goto CLEANUP;
}
}*/
// just return the source
//copy the source to destination
if(srcLength <= destCapacity){
uprv_memmove(dest,src,srcLength * U_SIZEOF_UCHAR);
}
reqLength = srcLength;
}
CLEANUP:
if(b1 != b1Stack && b1!=src){
uprv_free(b1);
}
if(b2 != b2Stack){
uprv_free(b2);
}
uprv_free(caseFlags);
// The RFC states that
// <quote>
// ToUnicode never fails. If any step fails, then the original input
// is returned immediately in that step.
// </quote>
// So if any step fails lets copy source to destination
if(U_FAILURE(*status)){
//copy the source to destination
if(dest && srcLength <= destCapacity){
// srcLength should have already been set earlier.
U_ASSERT(srcLength >= 0);
uprv_memmove(dest,src,srcLength * U_SIZEOF_UCHAR);
}
reqLength = srcLength;
*status = U_ZERO_ERROR;
}
return u_terminateUChars(dest, destCapacity, reqLength, status);
}
void uBuildMemory(uType* type)
{
U_ASSERT(type);
if (!type->IsClosed())
return;
size_t strongCount = 0,
weakCount = 0,
objOffset = U_IS_OBJECT(type)
? sizeof(uObject)
: 0,
typeOffset = 0;
if (type->Base)
type->Base->Build();
for (size_t i = 0; i < type->FieldCount; i++)
{
uFieldInfo& f = type->Fields[i];
U_ASSERT(f.Type);
if (f.Type != type && !U_IS_OBJECT(f.Type))
f.Type->Build();
if ((f.Flags & uFieldFlagsStatic) == 0)
{
if ((f.Flags & uFieldFlagsConstrained) == 0)
objOffset = f.Offset + f.Type->ValueSize;
if (U_IS_VALUE(f.Type))
{
strongCount += f.Type->Refs.StrongCount;
weakCount += f.Type->Refs.WeakCount;
}
else if ((f.Flags & uFieldFlagsWeak) != 0)
weakCount++;
else
strongCount++;
}
else if ((f.Flags & uFieldFlagsConstrained) != 0)
{
uAlignField(typeOffset, f.Type);
f.Offset = typeOffset;
typeOffset += f.Type->ValueSize;
}
}
size_t size = typeOffset + (strongCount + weakCount) * sizeof(uRefInfo<size_t>);
uint8_t* ptr = (uint8_t*)malloc(size); // Leak
memset(ptr, 0, size);
type->Refs.Strong = (uRefInfo<size_t>*)ptr;
ptr += strongCount * sizeof(uRefInfo<size_t>);
type->Refs.Weak = (uRefInfo<size_t>*)ptr;
ptr += weakCount * sizeof(uRefInfo<size_t>);
for (size_t i = 0; i < type->FieldCount; i++)
{
#ifdef DEBUG_ARC
#define DEBUG_NAME ((Xli::String)type->FullName + "[" + (int)i + "]").CopyPtr(), // Leak
#else
#define DEBUG_NAME
#endif
uFieldInfo& f = type->Fields[i];
if ((f.Flags & uFieldFlagsStatic) == 0)
{
if ((f.Flags & uFieldFlagsConstrained) != 0)
{
uAlignField(objOffset, f.Type);
f.Flags &= ~uFieldFlagsConstrained;
f.Offset = objOffset;
objOffset += f.Type->ValueSize;
}
if (U_IS_VALUE(f.Type))
{
f.Flags &= ~uFieldFlagsWeak;
for (size_t j = 0; j < f.Type->Refs.StrongCount; j++)
type->Refs.Strong[type->Refs.StrongCount++] = f.Type->Refs.Strong[j] + f.Offset;
for (size_t j = 0; j < f.Type->Refs.WeakCount; j++)
type->Refs.Weak[type->Refs.WeakCount++] = f.Type->Refs.Weak[j] + f.Offset;
}
else if ((f.Flags & uFieldFlagsWeak) != 0)
{
uRefInfo<size_t> ref = {DEBUG_NAME f.Offset};
type->Refs.Weak[type->Refs.WeakCount++] = ref;
}
else
{
uRefInfo<size_t> ref = {DEBUG_NAME f.Offset};
type->Refs.Strong[type->Refs.StrongCount++] = ref;
}
}
else
{
if ((f.Flags & uFieldFlagsConstrained) != 0)
{
f.Flags &= ~uFieldFlagsConstrained;
f.Offset += (uintptr_t)ptr;
}
if ((f.Flags & uFieldFlagsWeak) != 0)
{
uRefInfo<uWeakObject**> ref = {DEBUG_NAME (uWeakObject**)f.Offset};
_WeakRefs->Add(ref);
}
else if (U_IS_OBJECT(f.Type))
{
uRefInfo<uObject**> ref = {DEBUG_NAME (uObject**)f.Offset};
_StrongRefs->Add(ref);
}
}
#undef DEBUG_NAME
}
if (U_IS_VALUE(type))
{
if (objOffset != 0)
{
uAlignField(objOffset, type);
U_ASSERT(type->ValueSize == objOffset || type->ValueSize == 0);
type->ValueSize = objOffset;
}
type->ObjectSize = sizeof(uObject) + type->ValueSize;
}
else
{
if (type->Base && type->Base->ObjectSize > objOffset)
objOffset = type->Base->ObjectSize;
if (objOffset > type->ObjectSize)
type->ObjectSize = objOffset;
}
#ifdef DEBUG_UNSAFE
uint8_t* layout = (uint8_t*)U_ALLOCA(type->ObjectSize);
memset(layout, 0, type->ObjectSize);
for (size_t i = 0; i < type->FieldCount; i++)
{
uFieldInfo& f = type->Fields[i];
if ((f.Flags & uFieldFlagsStatic) == 0)
{
for (size_t j = 0; j < f.Type->ValueSize; j++)
{
U_ASSERT(f.Offset + j < type->ObjectSize);
layout[f.Offset + j]++;
}
}
}
// Verify that no fields are overlapping
for (size_t i = 0; i < type->ObjectSize; i++)
U_ASSERT(layout[i] < 2);
#endif
}
/*
* @param text A UText representing the text
* @param rangeStart The start of the range of dictionary characters
* @param rangeEnd The end of the range of dictionary characters
* @param foundBreaks Output of C array of int32_t break positions, or 0
* @return The number of breaks found
*/
int32_t
CjkBreakEngine::divideUpDictionaryRange( UText *text,
int32_t rangeStart,
int32_t rangeEnd,
UStack &foundBreaks ) const {
if (rangeStart >= rangeEnd) {
return 0;
}
const size_t defaultInputLength = 80;
size_t inputLength = rangeEnd - rangeStart;
// TODO: Replace by UnicodeString.
AutoBuffer<UChar, defaultInputLength> charString(inputLength);
// Normalize the input string and put it in normalizedText.
// The map from the indices of the normalized input to the raw
// input is kept in charPositions.
UErrorCode status = U_ZERO_ERROR;
utext_extract(text, rangeStart, rangeEnd, charString.elems(), inputLength, &status);
if (U_FAILURE(status)) {
return 0;
}
UnicodeString inputString(charString.elems(), inputLength);
// TODO: Use Normalizer2.
UNormalizationMode norm_mode = UNORM_NFKC;
UBool isNormalized =
Normalizer::quickCheck(inputString, norm_mode, status) == UNORM_YES ||
Normalizer::isNormalized(inputString, norm_mode, status);
// TODO: Replace by UVector32.
AutoBuffer<int32_t, defaultInputLength> charPositions(inputLength + 1);
int numChars = 0;
UText normalizedText = UTEXT_INITIALIZER;
// Needs to be declared here because normalizedText holds onto its buffer.
UnicodeString normalizedString;
if (isNormalized) {
int32_t index = 0;
charPositions[0] = 0;
while(index < inputString.length()) {
index = inputString.moveIndex32(index, 1);
charPositions[++numChars] = index;
}
utext_openUnicodeString(&normalizedText, &inputString, &status);
}
else {
Normalizer::normalize(inputString, norm_mode, 0, normalizedString, status);
if (U_FAILURE(status)) {
return 0;
}
charPositions.resize(normalizedString.length() + 1);
Normalizer normalizer(charString.elems(), inputLength, norm_mode);
int32_t index = 0;
charPositions[0] = 0;
while(index < normalizer.endIndex()){
/* UChar32 uc = */ normalizer.next();
charPositions[++numChars] = index = normalizer.getIndex();
}
utext_openUnicodeString(&normalizedText, &normalizedString, &status);
}
if (U_FAILURE(status)) {
return 0;
}
// From this point on, all the indices refer to the indices of
// the normalized input string.
// bestSnlp[i] is the snlp of the best segmentation of the first i
// characters in the range to be matched.
// TODO: Replace by UVector32.
AutoBuffer<uint32_t, defaultInputLength> bestSnlp(numChars + 1);
bestSnlp[0] = 0;
for(int i = 1; i <= numChars; i++) {
bestSnlp[i] = kuint32max;
}
// prev[i] is the index of the last CJK character in the previous word in
// the best segmentation of the first i characters.
// TODO: Replace by UVector32.
AutoBuffer<int, defaultInputLength> prev(numChars + 1);
for(int i = 0; i <= numChars; i++){
prev[i] = -1;
}
const size_t maxWordSize = 20;
// TODO: Replace both with UVector32.
AutoBuffer<int32_t, maxWordSize> values(numChars);
AutoBuffer<int32_t, maxWordSize> lengths(numChars);
// Dynamic programming to find the best segmentation.
bool is_prev_katakana = false;
for (int32_t i = 0; i < numChars; ++i) {
//utext_setNativeIndex(text, rangeStart + i);
utext_setNativeIndex(&normalizedText, i);
if (bestSnlp[i] == kuint32max)
continue;
int32_t count;
// limit maximum word length matched to size of current substring
int32_t maxSearchLength = (i + maxWordSize < (size_t) numChars)? maxWordSize : (numChars - i);
fDictionary->matches(&normalizedText, maxSearchLength, lengths.elems(), count, maxSearchLength, values.elems());
// if there are no single character matches found in the dictionary
// starting with this charcter, treat character as a 1-character word
// with the highest value possible, i.e. the least likely to occur.
// Exclude Korean characters from this treatment, as they should be left
// together by default.
if((count == 0 || lengths[0] != 1) &&
!fHangulWordSet.contains(utext_current32(&normalizedText))) {
values[count] = maxSnlp;
lengths[count++] = 1;
}
for (int j = 0; j < count; j++) {
uint32_t newSnlp = bestSnlp[i] + values[j];
if (newSnlp < bestSnlp[lengths[j] + i]) {
bestSnlp[lengths[j] + i] = newSnlp;
prev[lengths[j] + i] = i;
}
}
// In Japanese,
// Katakana word in single character is pretty rare. So we apply
// the following heuristic to Katakana: any continuous run of Katakana
// characters is considered a candidate word with a default cost
// specified in the katakanaCost table according to its length.
//utext_setNativeIndex(text, rangeStart + i);
utext_setNativeIndex(&normalizedText, i);
bool is_katakana = isKatakana(utext_current32(&normalizedText));
if (!is_prev_katakana && is_katakana) {
int j = i + 1;
utext_next32(&normalizedText);
// Find the end of the continuous run of Katakana characters
while (j < numChars && (j - i) < kMaxKatakanaGroupLength &&
isKatakana(utext_current32(&normalizedText))) {
utext_next32(&normalizedText);
++j;
}
if ((j - i) < kMaxKatakanaGroupLength) {
uint32_t newSnlp = bestSnlp[i] + getKatakanaCost(j - i);
if (newSnlp < bestSnlp[j]) {
bestSnlp[j] = newSnlp;
prev[j] = i;
}
}
}
is_prev_katakana = is_katakana;
}
// Start pushing the optimal offset index into t_boundary (t for tentative).
// prev[numChars] is guaranteed to be meaningful.
// We'll first push in the reverse order, i.e.,
// t_boundary[0] = numChars, and afterwards do a swap.
// TODO: Replace by UVector32.
AutoBuffer<int, maxWordSize> t_boundary(numChars + 1);
int numBreaks = 0;
// No segmentation found, set boundary to end of range
if (bestSnlp[numChars] == kuint32max) {
t_boundary[numBreaks++] = numChars;
} else {
for (int i = numChars; i > 0; i = prev[i]) {
t_boundary[numBreaks++] = i;
}
U_ASSERT(prev[t_boundary[numBreaks - 1]] == 0);
}
// Reverse offset index in t_boundary.
// Don't add a break for the start of the dictionary range if there is one
// there already.
if (foundBreaks.size() == 0 || foundBreaks.peeki() < rangeStart) {
t_boundary[numBreaks++] = 0;
}
// Now that we're done, convert positions in t_bdry[] (indices in
// the normalized input string) back to indices in the raw input string
// while reversing t_bdry and pushing values to foundBreaks.
for (int i = numBreaks-1; i >= 0; i--) {
foundBreaks.push(charPositions[t_boundary[i]] + rangeStart, status);
}
utext_close(&normalizedText);
return numBreaks;
}
U_CAPI void U_EXPORT2
umtx_condSignal(UConditionVar *cond) {
int sysErr = pthread_cond_signal(&cond->fCondition);
(void)sysErr;
U_ASSERT(sysErr == 0);
}
static int32_t U_CALLCONV
ubidi_swap(const UDataSwapper *ds,
const void *inData, int32_t length, void *outData,
UErrorCode *pErrorCode) {
const UDataInfo *pInfo;
int32_t headerSize;
const uint8_t *inBytes;
uint8_t *outBytes;
const int32_t *inIndexes;
int32_t indexes[16];
int32_t i, offset, count, size;
/* udata_swapDataHeader checks the arguments */
headerSize=udata_swapDataHeader(ds, inData, length, outData, pErrorCode);
if(pErrorCode==NULL || U_FAILURE(*pErrorCode)) {
return 0;
}
/* check data format and format version */
pInfo=(const UDataInfo *)((const char *)inData+4);
if(!(
pInfo->dataFormat[0]==UBIDI_FMT_0 && /* dataFormat="BiDi" */
pInfo->dataFormat[1]==UBIDI_FMT_1 &&
pInfo->dataFormat[2]==UBIDI_FMT_2 &&
pInfo->dataFormat[3]==UBIDI_FMT_3 &&
((pInfo->formatVersion[0]==1 &&
pInfo->formatVersion[2]==UTRIE_SHIFT &&
pInfo->formatVersion[3]==UTRIE_INDEX_SHIFT) ||
pInfo->formatVersion[0]==2)
)) {
udata_printError(ds, "ubidi_swap(): data format %02x.%02x.%02x.%02x (format version %02x) is not recognized as bidi/shaping data\n",
pInfo->dataFormat[0], pInfo->dataFormat[1],
pInfo->dataFormat[2], pInfo->dataFormat[3],
pInfo->formatVersion[0]);
*pErrorCode=U_UNSUPPORTED_ERROR;
return 0;
}
inBytes=(const uint8_t *)inData+headerSize;
outBytes=(uint8_t *)outData+headerSize;
inIndexes=(const int32_t *)inBytes;
if(length>=0) {
length-=headerSize;
if(length<16*4) {
udata_printError(ds, "ubidi_swap(): too few bytes (%d after header) for bidi/shaping data\n",
length);
*pErrorCode=U_INDEX_OUTOFBOUNDS_ERROR;
return 0;
}
}
/* read the first 16 indexes (ICU 3.4/format version 1: UBIDI_IX_TOP==16, might grow) */
for(i=0; i<16; ++i) {
indexes[i]=udata_readInt32(ds, inIndexes[i]);
}
/* get the total length of the data */
size=indexes[UBIDI_IX_LENGTH];
if(length>=0) {
if(length<size) {
udata_printError(ds, "ubidi_swap(): too few bytes (%d after header) for all of bidi/shaping data\n",
length);
*pErrorCode=U_INDEX_OUTOFBOUNDS_ERROR;
return 0;
}
/* copy the data for inaccessible bytes */
if(inBytes!=outBytes) {
uprv_memcpy(outBytes, inBytes, size);
}
offset=0;
/* swap the int32_t indexes[] */
count=indexes[UBIDI_IX_INDEX_TOP]*4;
ds->swapArray32(ds, inBytes, count, outBytes, pErrorCode);
offset+=count;
/* swap the UTrie */
count=indexes[UBIDI_IX_TRIE_SIZE];
utrie2_swapAnyVersion(ds, inBytes+offset, count, outBytes+offset, pErrorCode);
offset+=count;
/* swap the uint32_t mirrors[] */
count=indexes[UBIDI_IX_MIRROR_LENGTH]*4;
ds->swapArray32(ds, inBytes+offset, count, outBytes+offset, pErrorCode);
offset+=count;
/* just skip the uint8_t jgArray[] */
count=indexes[UBIDI_IX_JG_LIMIT]-indexes[UBIDI_IX_JG_START];
offset+=count;
U_ASSERT(offset==size);
}
return headerSize+size;
}
/**
* Override Calendar to compute several fields specific to the Islamic
* calendar system. These are:
*
* <ul><li>ERA
* <li>YEAR
* <li>MONTH
* <li>DAY_OF_MONTH
* <li>DAY_OF_YEAR
* <li>EXTENDED_YEAR</ul>
*
* The DAY_OF_WEEK and DOW_LOCAL fields are already set when this
* method is called. The getGregorianXxx() methods return Gregorian
* calendar equivalents for the given Julian day.
* @draft ICU 2.4
*/
void IslamicCalendar::handleComputeFields(int32_t julianDay, UErrorCode &status) {
int32_t year, month, dayOfMonth, dayOfYear;
int32_t startDate;
int32_t days = julianDay - CIVIL_EPOC;
if (cType == CIVIL || cType == TBLA) {
if(cType == TBLA) {
days = julianDay - ASTRONOMICAL_EPOC;
}
// Use the civil calendar approximation, which is just arithmetic
year = (int)ClockMath::floorDivide( (double)(30 * days + 10646) , 10631.0 );
month = (int32_t)uprv_ceil((days - 29 - yearStart(year)) / 29.5 );
month = month<11?month:11;
startDate = monthStart(year, month);
} else if(cType == ASTRONOMICAL){
// Guess at the number of elapsed full months since the epoch
int32_t months = (int32_t)uprv_floor((double)days / CalendarAstronomer::SYNODIC_MONTH);
startDate = (int32_t)uprv_floor(months * CalendarAstronomer::SYNODIC_MONTH);
double age = moonAge(internalGetTime(), status);
if (U_FAILURE(status)) {
status = U_MEMORY_ALLOCATION_ERROR;
return;
}
if ( days - startDate >= 25 && age > 0) {
// If we're near the end of the month, assume next month and search backwards
months++;
}
// Find out the last time that the new moon was actually visible at this longitude
// This returns midnight the night that the moon was visible at sunset.
while ((startDate = trueMonthStart(months)) > days) {
// If it was after the date in question, back up a month and try again
months--;
}
year = months / 12 + 1;
month = months % 12;
} else if(cType == UMALQURA) {
int32_t umalquraStartdays = yearStart(UMALQURA_YEAR_START) ;
if( days < umalquraStartdays){
//Use Civil calculation
year = (int)ClockMath::floorDivide( (double)(30 * days + 10646) , 10631.0 );
month = (int32_t)uprv_ceil((days - 29 - yearStart(year)) / 29.5 );
month = month<11?month:11;
startDate = monthStart(year, month);
}else{
int y =UMALQURA_YEAR_START-1, m =0;
long d = 1;
while(d > 0){
y++;
d = days - yearStart(y) +1;
if(d == handleGetYearLength(y)){
m=11;
break;
}else if(d < handleGetYearLength(y) ){
int monthLen = handleGetMonthLength(y, m);
m=0;
while(d > monthLen){
d -= monthLen;
m++;
monthLen = handleGetMonthLength(y, m);
}
break;
}
}
year = y;
month = m;
}
} else { // invalid 'civil'
U_ASSERT(false); // should not get here, out of range
year=month=0;
}
dayOfMonth = (days - monthStart(year, month)) + 1;
// Now figure out the day of the year.
dayOfYear = (days - monthStart(year, 0)) + 1;
internalSet(UCAL_ERA, 0);
internalSet(UCAL_YEAR, year);
internalSet(UCAL_EXTENDED_YEAR, year);
internalSet(UCAL_MONTH, month);
internalSet(UCAL_DAY_OF_MONTH, dayOfMonth);
internalSet(UCAL_DAY_OF_YEAR, dayOfYear);
}
//------------------------------------------------------------------------------
//
// scanSet Construct a UnicodeSet from the text at the current scan
// position. Advance the scan position to the first character
// after the set.
//
// A new RBBI setref node referring to the set is pushed onto the node
// stack.
//
// The scan position is normally under the control of the state machine
// that controls rule parsing. UnicodeSets, however, are parsed by
// the UnicodeSet constructor, not by the RBBI rule parser.
//
//------------------------------------------------------------------------------
void RBBIRuleScanner::scanSet() {
UnicodeSet *uset;
ParsePosition pos;
int startPos;
int i;
if (U_FAILURE(*fRB->fStatus)) {
return;
}
pos.setIndex(fScanIndex);
startPos = fScanIndex;
UErrorCode localStatus = U_ZERO_ERROR;
uset = new UnicodeSet();
if (uset == NULL) {
localStatus = U_MEMORY_ALLOCATION_ERROR;
} else {
uset->applyPatternIgnoreSpace(fRB->fRules, pos, fSymbolTable, localStatus);
}
if (U_FAILURE(localStatus)) {
// TODO: Get more accurate position of the error from UnicodeSet's return info.
// UnicodeSet appears to not be reporting correctly at this time.
#ifdef RBBI_DEBUG
RBBIDebugPrintf("UnicodeSet parse postion.ErrorIndex = %d\n", pos.getIndex());
#endif
error(localStatus);
delete uset;
return;
}
// Verify that the set contains at least one code point.
//
U_ASSERT(uset!=NULL);
if (uset->isEmpty()) {
// This set is empty.
// Make it an error, because it almost certainly is not what the user wanted.
// Also, avoids having to think about corner cases in the tree manipulation code
// that occurs later on.
error(U_BRK_RULE_EMPTY_SET);
delete uset;
return;
}
// Advance the RBBI parse postion over the UnicodeSet pattern.
// Don't just set fScanIndex because the line/char positions maintained
// for error reporting would be thrown off.
i = pos.getIndex();
for (;;) {
if (fNextIndex >= i) {
break;
}
nextCharLL();
}
if (U_SUCCESS(*fRB->fStatus)) {
RBBINode *n;
n = pushNewNode(RBBINode::setRef);
if (U_FAILURE(*fRB->fStatus)) {
return;
}
n->fFirstPos = startPos;
n->fLastPos = fNextIndex;
fRB->fRules.extractBetween(n->fFirstPos, n->fLastPos, n->fText);
// findSetFor() serves several purposes here:
// - Adopts storage for the UnicodeSet, will be responsible for deleting.
// - Mantains collection of all sets in use, needed later for establishing
// character categories for run time engine.
// - Eliminates mulitiple instances of the same set.
// - Creates a new uset node if necessary (if this isn't a duplicate.)
findSetFor(n->fText, n, uset);
}
}
U_CAPI void U_EXPORT2
unum_setAttribute( UNumberFormat* fmt,
UNumberFormatAttribute attr,
int32_t newValue)
{
if (((NumberFormat*)fmt)->getDynamicClassID() == DecimalFormat::getStaticClassID()) {
DecimalFormat* df = (DecimalFormat*) fmt;
switch(attr) {
case UNUM_PARSE_INT_ONLY:
df->setParseIntegerOnly(newValue!=0);
break;
case UNUM_GROUPING_USED:
df->setGroupingUsed(newValue!=0);
break;
case UNUM_DECIMAL_ALWAYS_SHOWN:
df->setDecimalSeparatorAlwaysShown(newValue!=0);
break;
case UNUM_MAX_INTEGER_DIGITS:
df->setMaximumIntegerDigits(newValue);
break;
case UNUM_MIN_INTEGER_DIGITS:
df->setMinimumIntegerDigits(newValue);
break;
case UNUM_INTEGER_DIGITS:
df->setMinimumIntegerDigits(newValue);
df->setMaximumIntegerDigits(newValue);
break;
case UNUM_MAX_FRACTION_DIGITS:
df->setMaximumFractionDigits(newValue);
break;
case UNUM_MIN_FRACTION_DIGITS:
df->setMinimumFractionDigits(newValue);
break;
case UNUM_FRACTION_DIGITS:
df->setMinimumFractionDigits(newValue);
df->setMaximumFractionDigits(newValue);
break;
case UNUM_SIGNIFICANT_DIGITS_USED:
df->setSignificantDigitsUsed(newValue!=0);
break;
case UNUM_MAX_SIGNIFICANT_DIGITS:
df->setMaximumSignificantDigits(newValue);
break;
case UNUM_MIN_SIGNIFICANT_DIGITS:
df->setMinimumSignificantDigits(newValue);
break;
case UNUM_MULTIPLIER:
df->setMultiplier(newValue);
break;
case UNUM_GROUPING_SIZE:
df->setGroupingSize(newValue);
break;
case UNUM_ROUNDING_MODE:
df->setRoundingMode((DecimalFormat::ERoundingMode)newValue);
break;
case UNUM_FORMAT_WIDTH:
df->setFormatWidth(newValue);
break;
case UNUM_PADDING_POSITION:
/** The position at which padding will take place. */
df->setPadPosition((DecimalFormat::EPadPosition)newValue);
break;
case UNUM_SECONDARY_GROUPING_SIZE:
df->setSecondaryGroupingSize(newValue);
break;
default:
/* Shouldn't get here anyway */
break;
}
} else {
U_ASSERT(((NumberFormat*)fmt)->getDynamicClassID() == RuleBasedNumberFormat::getStaticClassID());
if (attr == UNUM_LENIENT_PARSE) {
#if !UCONFIG_NO_COLLATION
((RuleBasedNumberFormat*)fmt)->setLenient((UBool)newValue);
#endif
}
}
}
U_CAPI int32_t U_EXPORT2
unum_getTextAttribute(const UNumberFormat* fmt,
UNumberFormatTextAttribute tag,
UChar* result,
int32_t resultLength,
UErrorCode* status)
{
if(U_FAILURE(*status))
return -1;
UnicodeString res;
if(!(result==NULL && resultLength==0)) {
// NULL destination for pure preflighting: empty dummy string
// otherwise, alias the destination buffer
res.setTo(result, 0, resultLength);
}
if (((const NumberFormat*)fmt)->getDynamicClassID() == DecimalFormat::getStaticClassID()) {
const DecimalFormat* df = (const DecimalFormat*) fmt;
switch(tag) {
case UNUM_POSITIVE_PREFIX:
df->getPositivePrefix(res);
break;
case UNUM_POSITIVE_SUFFIX:
df->getPositiveSuffix(res);
break;
case UNUM_NEGATIVE_PREFIX:
df->getNegativePrefix(res);
break;
case UNUM_NEGATIVE_SUFFIX:
df->getNegativeSuffix(res);
break;
case UNUM_PADDING_CHARACTER:
res = df->getPadCharacterString();
break;
case UNUM_CURRENCY_CODE:
res = UnicodeString(df->getCurrency());
break;
default:
*status = U_UNSUPPORTED_ERROR;
return -1;
}
} else {
U_ASSERT(((const NumberFormat*)fmt)->getDynamicClassID() == RuleBasedNumberFormat::getStaticClassID());
const RuleBasedNumberFormat* rbnf = (const RuleBasedNumberFormat*)fmt;
if (tag == UNUM_DEFAULT_RULESET) {
res = rbnf->getDefaultRuleSetName();
} else if (tag == UNUM_PUBLIC_RULESETS) {
int32_t count = rbnf->getNumberOfRuleSetNames();
for (int i = 0; i < count; ++i) {
res += rbnf->getRuleSetName(i);
res += (UChar)0x003b; // semicolon
}
} else {
*status = U_UNSUPPORTED_ERROR;
return -1;
}
}
return res.extract(result, resultLength, *status);
}
U_CAPI int32_t U_EXPORT2
unum_getAttribute(const UNumberFormat* fmt,
UNumberFormatAttribute attr)
{
if (((const NumberFormat*)fmt)->getDynamicClassID() == DecimalFormat::getStaticClassID()) {
const DecimalFormat* df = (const DecimalFormat*) fmt;
switch(attr) {
case UNUM_PARSE_INT_ONLY:
return df->isParseIntegerOnly();
case UNUM_GROUPING_USED:
return df->isGroupingUsed();
case UNUM_DECIMAL_ALWAYS_SHOWN:
return df->isDecimalSeparatorAlwaysShown();
case UNUM_MAX_INTEGER_DIGITS:
return df->getMaximumIntegerDigits();
case UNUM_MIN_INTEGER_DIGITS:
return df->getMinimumIntegerDigits();
case UNUM_INTEGER_DIGITS:
// TBD: what should this return?
return df->getMinimumIntegerDigits();
case UNUM_MAX_FRACTION_DIGITS:
return df->getMaximumFractionDigits();
case UNUM_MIN_FRACTION_DIGITS:
return df->getMinimumFractionDigits();
case UNUM_FRACTION_DIGITS:
// TBD: what should this return?
return df->getMinimumFractionDigits();
case UNUM_SIGNIFICANT_DIGITS_USED:
return df->areSignificantDigitsUsed();
case UNUM_MAX_SIGNIFICANT_DIGITS:
return df->getMaximumSignificantDigits();
case UNUM_MIN_SIGNIFICANT_DIGITS:
return df->getMinimumSignificantDigits();
case UNUM_MULTIPLIER:
return df->getMultiplier();
case UNUM_GROUPING_SIZE:
return df->getGroupingSize();
case UNUM_ROUNDING_MODE:
return df->getRoundingMode();
case UNUM_FORMAT_WIDTH:
return df->getFormatWidth();
case UNUM_PADDING_POSITION:
return df->getPadPosition();
case UNUM_SECONDARY_GROUPING_SIZE:
return df->getSecondaryGroupingSize();
default:
/* enums out of sync? unsupported enum? */
break;
}
} else {
U_ASSERT(((const NumberFormat*)fmt)->getDynamicClassID() == RuleBasedNumberFormat::getStaticClassID());
if (attr == UNUM_LENIENT_PARSE) {
#if !UCONFIG_NO_COLLATION
return ((const RuleBasedNumberFormat*)fmt)->isLenient();
#endif
}
}
return -1;
}
UStringEnumeration::UStringEnumeration(UEnumeration* _uenum) :
uenum(_uenum) {
U_ASSERT(_uenum != 0);
}
const char *StandardPlural::getKeyword(Form p) {
U_ASSERT(ZERO <= p && p < COUNT);
return gKeywords[p];
}
//-----------------------------------------------------------------------------
//
// buildStateTable() Determine the set of runtime DFA states and the
// transition tables for these states, by the algorithm
// of fig. 3.44 in Aho.
//
// Most of the comments are quotes of Aho's psuedo-code.
//
//-----------------------------------------------------------------------------
void RBBITableBuilder::buildStateTable() {
if (U_FAILURE(*fStatus)) {
return;
}
RBBIStateDescriptor *failState;
// Set it to NULL to avoid uninitialized warning
RBBIStateDescriptor *initialState = NULL;
//
// Add a dummy state 0 - the stop state. Not from Aho.
int lastInputSymbol = fRB->fSetBuilder->getNumCharCategories() - 1;
failState = new RBBIStateDescriptor(lastInputSymbol, fStatus);
if (failState == NULL) {
*fStatus = U_MEMORY_ALLOCATION_ERROR;
goto ExitBuildSTdeleteall;
}
failState->fPositions = new UVector(*fStatus);
if (failState->fPositions == NULL) {
*fStatus = U_MEMORY_ALLOCATION_ERROR;
}
if (failState->fPositions == NULL || U_FAILURE(*fStatus)) {
goto ExitBuildSTdeleteall;
}
fDStates->addElement(failState, *fStatus);
if (U_FAILURE(*fStatus)) {
goto ExitBuildSTdeleteall;
}
// initially, the only unmarked state in Dstates is firstpos(root),
// where toot is the root of the syntax tree for (r)#;
initialState = new RBBIStateDescriptor(lastInputSymbol, fStatus);
if (initialState == NULL) {
*fStatus = U_MEMORY_ALLOCATION_ERROR;
}
if (U_FAILURE(*fStatus)) {
goto ExitBuildSTdeleteall;
}
initialState->fPositions = new UVector(*fStatus);
if (initialState->fPositions == NULL) {
*fStatus = U_MEMORY_ALLOCATION_ERROR;
}
if (U_FAILURE(*fStatus)) {
goto ExitBuildSTdeleteall;
}
setAdd(initialState->fPositions, fTree->fFirstPosSet);
fDStates->addElement(initialState, *fStatus);
if (U_FAILURE(*fStatus)) {
goto ExitBuildSTdeleteall;
}
// while there is an unmarked state T in Dstates do begin
for (;;) {
RBBIStateDescriptor *T = NULL;
int32_t tx;
for (tx=1; tx<fDStates->size(); tx++) {
RBBIStateDescriptor *temp;
temp = (RBBIStateDescriptor *)fDStates->elementAt(tx);
if (temp->fMarked == FALSE) {
T = temp;
break;
}
}
if (T == NULL) {
break;
}
// mark T;
T->fMarked = TRUE;
// for each input symbol a do begin
int32_t a;
for (a = 1; a<=lastInputSymbol; a++) {
// let U be the set of positions that are in followpos(p)
// for some position p in T
// such that the symbol at position p is a;
UVector *U = NULL;
RBBINode *p;
int32_t px;
for (px=0; px<T->fPositions->size(); px++) {
p = (RBBINode *)T->fPositions->elementAt(px);
if ((p->fType == RBBINode::leafChar) && (p->fVal == a)) {
if (U == NULL) {
U = new UVector(*fStatus);
if (U == NULL) {
*fStatus = U_MEMORY_ALLOCATION_ERROR;
goto ExitBuildSTdeleteall;
}
}
setAdd(U, p->fFollowPos);
}
}
// if U is not empty and not in DStates then
int32_t ux = 0;
UBool UinDstates = FALSE;
if (U != NULL) {
U_ASSERT(U->size() > 0);
int ix;
for (ix=0; ix<fDStates->size(); ix++) {
RBBIStateDescriptor *temp2;
temp2 = (RBBIStateDescriptor *)fDStates->elementAt(ix);
if (setEquals(U, temp2->fPositions)) {
delete U;
U = temp2->fPositions;
ux = ix;
UinDstates = TRUE;
break;
}
}
// Add U as an unmarked state to Dstates
if (!UinDstates)
{
RBBIStateDescriptor *newState = new RBBIStateDescriptor(lastInputSymbol, fStatus);
if (newState == NULL) {
*fStatus = U_MEMORY_ALLOCATION_ERROR;
}
if (U_FAILURE(*fStatus)) {
goto ExitBuildSTdeleteall;
}
newState->fPositions = U;
fDStates->addElement(newState, *fStatus);
if (U_FAILURE(*fStatus)) {
return;
}
ux = fDStates->size()-1;
}
// Dtran[T, a] := U;
T->fDtran->setElementAt(ux, a);
}
}
}
return;
// delete local pointers only if error occured.
ExitBuildSTdeleteall:
delete initialState;
delete failState;
}
//------------------------------------------------------------------------------
//
// doParseAction Do some action during rule parsing.
// Called by the parse state machine.
// Actions build the parse tree and Unicode Sets,
// and maintain the parse stack for nested expressions.
//
// TODO: unify EParseAction and RBBI_RuleParseAction enum types.
// They represent exactly the same thing. They're separate
// only to work around enum forward declaration restrictions
// in some compilers, while at the same time avoiding multiple
// definitions problems. I'm sure that there's a better way.
//
//------------------------------------------------------------------------------
UBool RBBIRuleScanner::doParseActions(int32_t action)
{
RBBINode *n = NULL;
UBool returnVal = TRUE;
switch (action) {
case doExprStart:
pushNewNode(RBBINode::opStart);
fRuleNum++;
break;
case doNoChain:
// Scanned a '^' while on the rule start state.
fNoChainInRule = TRUE;
break;
case doExprOrOperator:
{
fixOpStack(RBBINode::precOpCat);
RBBINode *operandNode = fNodeStack[fNodeStackPtr--];
RBBINode *orNode = pushNewNode(RBBINode::opOr);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
orNode->fLeftChild = operandNode;
operandNode->fParent = orNode;
}
break;
case doExprCatOperator:
// concatenation operator.
// For the implicit concatenation of adjacent terms in an expression that are
// not separated by any other operator. Action is invoked between the
// actions for the two terms.
{
fixOpStack(RBBINode::precOpCat);
RBBINode *operandNode = fNodeStack[fNodeStackPtr--];
RBBINode *catNode = pushNewNode(RBBINode::opCat);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
catNode->fLeftChild = operandNode;
operandNode->fParent = catNode;
}
break;
case doLParen:
// Open Paren.
// The openParen node is a dummy operation type with a low precedence,
// which has the affect of ensuring that any real binary op that
// follows within the parens binds more tightly to the operands than
// stuff outside of the parens.
pushNewNode(RBBINode::opLParen);
break;
case doExprRParen:
fixOpStack(RBBINode::precLParen);
break;
case doNOP:
break;
case doStartAssign:
// We've just scanned "$variable = "
// The top of the node stack has the $variable ref node.
// Save the start position of the RHS text in the StartExpression node
// that precedes the $variableReference node on the stack.
// This will eventually be used when saving the full $variable replacement
// text as a string.
n = fNodeStack[fNodeStackPtr-1];
n->fFirstPos = fNextIndex; // move past the '='
// Push a new start-of-expression node; needed to keep parse of the
// RHS expression happy.
pushNewNode(RBBINode::opStart);
break;
case doEndAssign:
{
// We have reached the end of an assignement statement.
// Current scan char is the ';' that terminates the assignment.
// Terminate expression, leaves expression parse tree rooted in TOS node.
fixOpStack(RBBINode::precStart);
RBBINode *startExprNode = fNodeStack[fNodeStackPtr-2];
RBBINode *varRefNode = fNodeStack[fNodeStackPtr-1];
RBBINode *RHSExprNode = fNodeStack[fNodeStackPtr];
// Save original text of right side of assignment, excluding the terminating ';'
// in the root of the node for the right-hand-side expression.
RHSExprNode->fFirstPos = startExprNode->fFirstPos;
RHSExprNode->fLastPos = fScanIndex;
fRB->fRules.extractBetween(RHSExprNode->fFirstPos, RHSExprNode->fLastPos, RHSExprNode->fText);
// Expression parse tree becomes l. child of the $variable reference node.
varRefNode->fLeftChild = RHSExprNode;
RHSExprNode->fParent = varRefNode;
// Make a symbol table entry for the $variableRef node.
fSymbolTable->addEntry(varRefNode->fText, varRefNode, *fRB->fStatus);
if (U_FAILURE(*fRB->fStatus)) {
// This is a round-about way to get the parse position set
// so that duplicate symbols error messages include a line number.
UErrorCode t = *fRB->fStatus;
*fRB->fStatus = U_ZERO_ERROR;
error(t);
}
// Clean up the stack.
delete startExprNode;
fNodeStackPtr-=3;
break;
}
case doEndOfRule:
{
fixOpStack(RBBINode::precStart); // Terminate expression, leaves expression
if (U_FAILURE(*fRB->fStatus)) { // parse tree rooted in TOS node.
break;
}
#ifdef RBBI_DEBUG
if (fRB->fDebugEnv && uprv_strstr(fRB->fDebugEnv, "rtree")) {printNodeStack("end of rule");}
#endif
U_ASSERT(fNodeStackPtr == 1);
RBBINode *thisRule = fNodeStack[fNodeStackPtr];
// If this rule includes a look-ahead '/', add a endMark node to the
// expression tree.
if (fLookAheadRule) {
RBBINode *endNode = pushNewNode(RBBINode::endMark);
RBBINode *catNode = pushNewNode(RBBINode::opCat);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
fNodeStackPtr -= 2;
catNode->fLeftChild = thisRule;
catNode->fRightChild = endNode;
fNodeStack[fNodeStackPtr] = catNode;
endNode->fVal = fRuleNum;
endNode->fLookAheadEnd = TRUE;
thisRule = catNode;
// TODO: Disable chaining out of look-ahead (hard break) rules.
// The break on rule match is forced, so there is no point in building up
// the state table to chain into another rule for a longer match.
}
// Mark this node as being the root of a rule.
thisRule->fRuleRoot = TRUE;
// Flag if chaining into this rule is wanted.
//
if (fRB->fChainRules && // If rule chaining is enabled globally via !!chain
!fNoChainInRule) { // and no '^' chain-in inhibit was on this rule
thisRule->fChainIn = TRUE;
}
// All rule expressions are ORed together.
// The ';' that terminates an expression really just functions as a '|' with
// a low operator prededence.
//
// Each of the four sets of rules are collected separately.
// (forward, reverse, safe_forward, safe_reverse)
// OR this rule into the appropriate group of them.
//
RBBINode **destRules = (fReverseRule? &fRB->fReverseTree : fRB->fDefaultTree);
if (*destRules != NULL) {
// This is not the first rule encounted.
// OR previous stuff (from *destRules)
// with the current rule expression (on the Node Stack)
// with the resulting OR expression going to *destRules
//
RBBINode *thisRule = fNodeStack[fNodeStackPtr];
RBBINode *prevRules = *destRules;
RBBINode *orNode = pushNewNode(RBBINode::opOr);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
orNode->fLeftChild = prevRules;
prevRules->fParent = orNode;
orNode->fRightChild = thisRule;
thisRule->fParent = orNode;
*destRules = orNode;
}
else
{
// This is the first rule encountered (for this direction).
// Just move its parse tree from the stack to *destRules.
*destRules = fNodeStack[fNodeStackPtr];
}
fReverseRule = FALSE; // in preparation for the next rule.
fLookAheadRule = FALSE;
fNoChainInRule = FALSE;
fNodeStackPtr = 0;
}
break;
case doRuleError:
error(U_BRK_RULE_SYNTAX);
returnVal = FALSE;
break;
case doVariableNameExpectedErr:
error(U_BRK_RULE_SYNTAX);
break;
//
// Unary operands + ? *
// These all appear after the operand to which they apply.
// When we hit one, the operand (may be a whole sub expression)
// will be on the top of the stack.
// Unary Operator becomes TOS, with the old TOS as its one child.
case doUnaryOpPlus:
{
RBBINode *operandNode = fNodeStack[fNodeStackPtr--];
RBBINode *plusNode = pushNewNode(RBBINode::opPlus);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
plusNode->fLeftChild = operandNode;
operandNode->fParent = plusNode;
}
break;
case doUnaryOpQuestion:
{
RBBINode *operandNode = fNodeStack[fNodeStackPtr--];
RBBINode *qNode = pushNewNode(RBBINode::opQuestion);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
qNode->fLeftChild = operandNode;
operandNode->fParent = qNode;
}
break;
case doUnaryOpStar:
{
RBBINode *operandNode = fNodeStack[fNodeStackPtr--];
RBBINode *starNode = pushNewNode(RBBINode::opStar);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
starNode->fLeftChild = operandNode;
operandNode->fParent = starNode;
}
break;
case doRuleChar:
// A "Rule Character" is any single character that is a literal part
// of the regular expression. Like a, b and c in the expression "(abc*) | [:L:]"
// These are pretty uncommon in break rules; the terms are more commonly
// sets. To keep things uniform, treat these characters like as
// sets that just happen to contain only one character.
{
n = pushNewNode(RBBINode::setRef);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
findSetFor(UnicodeString(fC.fChar), n);
n->fFirstPos = fScanIndex;
n->fLastPos = fNextIndex;
fRB->fRules.extractBetween(n->fFirstPos, n->fLastPos, n->fText);
break;
}
case doDotAny:
// scanned a ".", meaning match any single character.
{
n = pushNewNode(RBBINode::setRef);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
findSetFor(UnicodeString(TRUE, kAny, 3), n);
n->fFirstPos = fScanIndex;
n->fLastPos = fNextIndex;
fRB->fRules.extractBetween(n->fFirstPos, n->fLastPos, n->fText);
break;
}
case doSlash:
// Scanned a '/', which identifies a look-ahead break position in a rule.
n = pushNewNode(RBBINode::lookAhead);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
n->fVal = fRuleNum;
n->fFirstPos = fScanIndex;
n->fLastPos = fNextIndex;
fRB->fRules.extractBetween(n->fFirstPos, n->fLastPos, n->fText);
fLookAheadRule = TRUE;
break;
case doStartTagValue:
// Scanned a '{', the opening delimiter for a tag value within a rule.
n = pushNewNode(RBBINode::tag);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
n->fVal = 0;
n->fFirstPos = fScanIndex;
n->fLastPos = fNextIndex;
break;
case doTagDigit:
// Just scanned a decimal digit that's part of a tag value
{
n = fNodeStack[fNodeStackPtr];
uint32_t v = u_charDigitValue(fC.fChar);
U_ASSERT(v < 10);
n->fVal = n->fVal*10 + v;
break;
}
case doTagValue:
n = fNodeStack[fNodeStackPtr];
n->fLastPos = fNextIndex;
fRB->fRules.extractBetween(n->fFirstPos, n->fLastPos, n->fText);
break;
case doTagExpectedError:
error(U_BRK_MALFORMED_RULE_TAG);
returnVal = FALSE;
break;
case doOptionStart:
// Scanning a !!option. At the start of string.
fOptionStart = fScanIndex;
break;
case doOptionEnd:
{
UnicodeString opt(fRB->fRules, fOptionStart, fScanIndex-fOptionStart);
if (opt == UNICODE_STRING("chain", 5)) {
fRB->fChainRules = TRUE;
} else if (opt == UNICODE_STRING("LBCMNoChain", 11)) {
fRB->fLBCMNoChain = TRUE;
} else if (opt == UNICODE_STRING("forward", 7)) {
fRB->fDefaultTree = &fRB->fForwardTree;
} else if (opt == UNICODE_STRING("reverse", 7)) {
fRB->fDefaultTree = &fRB->fReverseTree;
} else if (opt == UNICODE_STRING("safe_forward", 12)) {
fRB->fDefaultTree = &fRB->fSafeFwdTree;
} else if (opt == UNICODE_STRING("safe_reverse", 12)) {
fRB->fDefaultTree = &fRB->fSafeRevTree;
} else if (opt == UNICODE_STRING("lookAheadHardBreak", 18)) {
fRB->fLookAheadHardBreak = TRUE;
} else {
error(U_BRK_UNRECOGNIZED_OPTION);
}
}
break;
case doReverseDir:
fReverseRule = TRUE;
break;
case doStartVariableName:
n = pushNewNode(RBBINode::varRef);
if (U_FAILURE(*fRB->fStatus)) {
break;
}
n->fFirstPos = fScanIndex;
break;
case doEndVariableName:
n = fNodeStack[fNodeStackPtr];
if (n==NULL || n->fType != RBBINode::varRef) {
error(U_BRK_INTERNAL_ERROR);
break;
}
n->fLastPos = fScanIndex;
fRB->fRules.extractBetween(n->fFirstPos+1, n->fLastPos, n->fText);
// Look the newly scanned name up in the symbol table
// If there's an entry, set the l. child of the var ref to the replacement expression.
// (We also pass through here when scanning assignments, but no harm is done, other
// than a slight wasted effort that seems hard to avoid. Lookup will be null)
n->fLeftChild = fSymbolTable->lookupNode(n->fText);
break;
case doCheckVarDef:
n = fNodeStack[fNodeStackPtr];
if (n->fLeftChild == NULL) {
error(U_BRK_UNDEFINED_VARIABLE);
returnVal = FALSE;
}
break;
case doExprFinished:
break;
case doRuleErrorAssignExpr:
error(U_BRK_ASSIGN_ERROR);
returnVal = FALSE;
break;
case doExit:
returnVal = FALSE;
break;
case doScanUnicodeSet:
scanSet();
break;
default:
error(U_BRK_INTERNAL_ERROR);
returnVal = FALSE;
break;
}
return returnVal && U_SUCCESS(*fRB->fStatus);
}
U_CAPI void U_EXPORT2
umtx_condBroadcast(UConditionVar *cond) {
int sysErr = pthread_cond_broadcast(&cond->fCondition);
(void)sysErr;
U_ASSERT(sysErr == 0);
}
//------------------------------------------------------------------------------
//
// findSetFor given a UnicodeString,
// - find the corresponding Unicode Set (uset node)
// (create one if necessary)
// - Set fLeftChild of the caller's node (should be a setRef node)
// to the uset node
// Maintain a hash table of uset nodes, so the same one is always used
// for the same string.
// If a "to adopt" set is provided and we haven't seen this key before,
// add the provided set to the hash table.
// If the string is one (32 bit) char in length, the set contains
// just one element which is the char in question.
// If the string is "any", return a set containing all chars.
//
//------------------------------------------------------------------------------
void RBBIRuleScanner::findSetFor(const UnicodeString &s, RBBINode *node, UnicodeSet *setToAdopt) {
RBBISetTableEl *el;
// First check whether we've already cached a set for this string.
// If so, just use the cached set in the new node.
// delete any set provided by the caller, since we own it.
el = (RBBISetTableEl *)uhash_get(fSetTable, &s);
if (el != NULL) {
delete setToAdopt;
node->fLeftChild = el->val;
U_ASSERT(node->fLeftChild->fType == RBBINode::uset);
return;
}
// Haven't seen this set before.
// If the caller didn't provide us with a prebuilt set,
// create a new UnicodeSet now.
if (setToAdopt == NULL) {
if (s.compare(kAny, -1) == 0) {
setToAdopt = new UnicodeSet(0x000000, 0x10ffff);
} else {
UChar32 c;
c = s.char32At(0);
setToAdopt = new UnicodeSet(c, c);
}
}
//
// Make a new uset node to refer to this UnicodeSet
// This new uset node becomes the child of the caller's setReference node.
//
RBBINode *usetNode = new RBBINode(RBBINode::uset);
if (usetNode == NULL) {
error(U_MEMORY_ALLOCATION_ERROR);
return;
}
usetNode->fInputSet = setToAdopt;
usetNode->fParent = node;
node->fLeftChild = usetNode;
usetNode->fText = s;
//
// Add the new uset node to the list of all uset nodes.
//
fRB->fUSetNodes->addElement(usetNode, *fRB->fStatus);
//
// Add the new set to the set hash table.
//
el = (RBBISetTableEl *)uprv_malloc(sizeof(RBBISetTableEl));
UnicodeString *tkey = new UnicodeString(s);
if (tkey == NULL || el == NULL || setToAdopt == NULL) {
// Delete to avoid memory leak
delete tkey;
tkey = NULL;
uprv_free(el);
el = NULL;
delete setToAdopt;
setToAdopt = NULL;
error(U_MEMORY_ALLOCATION_ERROR);
return;
}
el->key = tkey;
el->val = usetNode;
uhash_put(fSetTable, el->key, el, fRB->fStatus);
return;
}
U_CFUNC int32_t
u_strFromPunycode(const UChar *src, int32_t srcLength,
UChar *dest, int32_t destCapacity,
UBool *caseFlags,
UErrorCode *pErrorCode) {
int32_t n, destLength, i, bias, basicLength, j, in, oldi, w, k, digit, t,
destCPCount, firstSupplementaryIndex, cpLength;
UChar b;
/* argument checking */
if(pErrorCode==NULL || U_FAILURE(*pErrorCode)) {
return 0;
}
if(src==NULL || srcLength<-1 || (dest==NULL && destCapacity!=0)) {
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
return 0;
}
if(srcLength==-1) {
srcLength=u_strlen(src);
}
/*
* Handle the basic code points:
* Let basicLength be the number of input code points
* before the last delimiter, or 0 if there is none,
* then copy the first basicLength code points to the output.
*
* The two following loops iterate backward.
*/
for(j=srcLength; j>0;) {
if(src[--j]==DELIMITER) {
break;
}
}
destLength=basicLength=destCPCount=j;
U_ASSERT(destLength>=0);
while(j>0) {
b=src[--j];
if(!IS_BASIC(b)) {
*pErrorCode=U_INVALID_CHAR_FOUND;
return 0;
}
if(j<destCapacity) {
dest[j]=(UChar)b;
if(caseFlags!=NULL) {
caseFlags[j]=IS_BASIC_UPPERCASE(b);
}
}
}
/* Initialize the state: */
n=INITIAL_N;
i=0;
bias=INITIAL_BIAS;
firstSupplementaryIndex=1000000000;
/*
* Main decoding loop:
* Start just after the last delimiter if any
* basic code points were copied; start at the beginning otherwise.
*/
for(in=basicLength>0 ? basicLength+1 : 0; in<srcLength; /* no op */) {
/*
* in is the index of the next character to be consumed, and
* destCPCount is the number of code points in the output array.
*
* Decode a generalized variable-length integer into delta,
* which gets added to i. The overflow checking is easier
* if we increase i as we go, then subtract off its starting
* value at the end to obtain delta.
*/
for(oldi=i, w=1, k=BASE; /* no condition */; k+=BASE) {
if(in>=srcLength) {
*pErrorCode=U_ILLEGAL_CHAR_FOUND;
return 0;
}
digit=basicToDigit[(uint8_t)src[in++]];
if(digit<0) {
*pErrorCode=U_INVALID_CHAR_FOUND;
return 0;
}
if(digit>(0x7fffffff-i)/w) {
/* integer overflow */
*pErrorCode=U_ILLEGAL_CHAR_FOUND;
return 0;
}
i+=digit*w;
/** RAM: comment out the old code for conformance with draft-ietf-idn-punycode-03.txt
t=k-bias;
if(t<TMIN) {
t=TMIN;
} else if(t>TMAX) {
t=TMAX;
}
*/
t=k-bias;
if(t<TMIN) {
t=TMIN;
} else if(k>=(bias+TMAX)) {
t=TMAX;
}
if(digit<t) {
break;
}
if(w>0x7fffffff/(BASE-t)) {
/* integer overflow */
*pErrorCode=U_ILLEGAL_CHAR_FOUND;
return 0;
}
w*=BASE-t;
}
/*
* Modification from sample code:
* Increments destCPCount here,
* where needed instead of in for() loop tail.
*/
++destCPCount;
bias=adaptBias(i-oldi, destCPCount, (UBool)(oldi==0));
/*
* i was supposed to wrap around from (incremented) destCPCount to 0,
* incrementing n each time, so we'll fix that now:
*/
if(i/destCPCount>(0x7fffffff-n)) {
/* integer overflow */
*pErrorCode=U_ILLEGAL_CHAR_FOUND;
return 0;
}
n+=i/destCPCount;
i%=destCPCount;
/* not needed for Punycode: */
/* if (decode_digit(n) <= BASE) return punycode_invalid_input; */
if(n>0x10ffff || U_IS_SURROGATE(n)) {
/* Unicode code point overflow */
*pErrorCode=U_ILLEGAL_CHAR_FOUND;
return 0;
}
/* Insert n at position i of the output: */
cpLength=U16_LENGTH(n);
if(dest!=NULL && ((destLength+cpLength)<=destCapacity)) {
int32_t codeUnitIndex;
/*
* Handle indexes when supplementary code points are present.
*
* In almost all cases, there will be only BMP code points before i
* and even in the entire string.
* This is handled with the same efficiency as with UTF-32.
*
* Only the rare cases with supplementary code points are handled
* more slowly - but not too bad since this is an insertion anyway.
*/
if(i<=firstSupplementaryIndex) {
codeUnitIndex=i;
if(cpLength>1) {
firstSupplementaryIndex=codeUnitIndex;
} else {
++firstSupplementaryIndex;
}
} else {
codeUnitIndex=firstSupplementaryIndex;
U16_FWD_N(dest, codeUnitIndex, destLength, i-codeUnitIndex);
}
/* use the UChar index codeUnitIndex instead of the code point index i */
if(codeUnitIndex<destLength) {
uprv_memmove(dest+codeUnitIndex+cpLength,
dest+codeUnitIndex,
(destLength-codeUnitIndex)*U_SIZEOF_UCHAR);
if(caseFlags!=NULL) {
uprv_memmove(caseFlags+codeUnitIndex+cpLength,
caseFlags+codeUnitIndex,
destLength-codeUnitIndex);
}
}
if(cpLength==1) {
/* BMP, insert one code unit */
dest[codeUnitIndex]=(UChar)n;
} else {
/* supplementary character, insert two code units */
dest[codeUnitIndex]=U16_LEAD(n);
dest[codeUnitIndex+1]=U16_TRAIL(n);
}
if(caseFlags!=NULL) {
/* Case of last character determines uppercase flag: */
caseFlags[codeUnitIndex]=IS_BASIC_UPPERCASE(src[in-1]);
if(cpLength==2) {
caseFlags[codeUnitIndex+1]=FALSE;
}
}
}
destLength+=cpLength;
U_ASSERT(destLength>=0);
++i;
}
return u_terminateUChars(dest, destCapacity, destLength, pErrorCode);
}
//------------------------------------------------------------------------------
//
// Parse RBBI rules. The state machine for rules parsing is here.
// The state tables are hand-written in the file rbbirpt.txt,
// and converted to the form used here by a perl
// script rbbicst.pl
//
//------------------------------------------------------------------------------
void RBBIRuleScanner::parse() {
uint16_t state;
const RBBIRuleTableEl *tableEl;
if (U_FAILURE(*fRB->fStatus)) {
return;
}
state = 1;
nextChar(fC);
//
// Main loop for the rule parsing state machine.
// Runs once per state transition.
// Each time through optionally performs, depending on the state table,
// - an advance to the the next input char
// - an action to be performed.
// - pushing or popping a state to/from the local state return stack.
//
for (;;) {
// Bail out if anything has gone wrong.
// RBBI rule file parsing stops on the first error encountered.
if (U_FAILURE(*fRB->fStatus)) {
break;
}
// Quit if state == 0. This is the normal way to exit the state machine.
//
if (state == 0) {
break;
}
// Find the state table element that matches the input char from the rule, or the
// class of the input character. Start with the first table row for this
// state, then linearly scan forward until we find a row that matches the
// character. The last row for each state always matches all characters, so
// the search will stop there, if not before.
//
tableEl = &gRuleParseStateTable[state];
#ifdef RBBI_DEBUG
if (fRB->fDebugEnv && uprv_strstr(fRB->fDebugEnv, "scan")) {
RBBIDebugPrintf("char, line, col = (\'%c\', %d, %d) state=%s ",
fC.fChar, fLineNum, fCharNum, RBBIRuleStateNames[state]);
}
#endif
for (;;) {
#ifdef RBBI_DEBUG
if (fRB->fDebugEnv && uprv_strstr(fRB->fDebugEnv, "scan")) { RBBIDebugPrintf("."); fflush(stdout);}
#endif
if (tableEl->fCharClass < 127 && fC.fEscaped == FALSE && tableEl->fCharClass == fC.fChar) {
// Table row specified an individual character, not a set, and
// the input character is not escaped, and
// the input character matched it.
break;
}
if (tableEl->fCharClass == 255) {
// Table row specified default, match anything character class.
break;
}
if (tableEl->fCharClass == 254 && fC.fEscaped) {
// Table row specified "escaped" and the char was escaped.
break;
}
if (tableEl->fCharClass == 253 && fC.fEscaped &&
(fC.fChar == 0x50 || fC.fChar == 0x70 )) {
// Table row specified "escaped P" and the char is either 'p' or 'P'.
break;
}
if (tableEl->fCharClass == 252 && fC.fChar == (UChar32)-1) {
// Table row specified eof and we hit eof on the input.
break;
}
if (tableEl->fCharClass >= 128 && tableEl->fCharClass < 240 && // Table specs a char class &&
fC.fEscaped == FALSE && // char is not escaped &&
fC.fChar != (UChar32)-1) { // char is not EOF
U_ASSERT((tableEl->fCharClass-128) < UPRV_LENGTHOF(fRuleSets));
if (fRuleSets[tableEl->fCharClass-128].contains(fC.fChar)) {
// Table row specified a character class, or set of characters,
// and the current char matches it.
break;
}
}
// No match on this row, advance to the next row for this state,
tableEl++;
}
if (fRB->fDebugEnv && uprv_strstr(fRB->fDebugEnv, "scan")) { RBBIDebugPuts("");}
//
// We've found the row of the state table that matches the current input
// character from the rules string.
// Perform any action specified by this row in the state table.
if (doParseActions((int32_t)tableEl->fAction) == FALSE) {
// Break out of the state machine loop if the
// the action signalled some kind of error, or
// the action was to exit, occurs on normal end-of-rules-input.
break;
}
if (tableEl->fPushState != 0) {
fStackPtr++;
if (fStackPtr >= kStackSize) {
error(U_BRK_INTERNAL_ERROR);
RBBIDebugPuts("RBBIRuleScanner::parse() - state stack overflow.");
fStackPtr--;
}
fStack[fStackPtr] = tableEl->fPushState;
}
if (tableEl->fNextChar) {
nextChar(fC);
}
// Get the next state from the table entry, or from the
// state stack if the next state was specified as "pop".
if (tableEl->fNextState != 255) {
state = tableEl->fNextState;
} else {
state = fStack[fStackPtr];
fStackPtr--;
if (fStackPtr < 0) {
error(U_BRK_INTERNAL_ERROR);
RBBIDebugPuts("RBBIRuleScanner::parse() - state stack underflow.");
fStackPtr++;
}
}
}
if (U_FAILURE(*fRB->fStatus)) {
return;
}
// If there are no forward rules set an error.
//
if (fRB->fForwardTree == NULL) {
error(U_BRK_RULE_SYNTAX);
return;
}
//
// If there were NO user specified reverse rules, set up the equivalent of ".*;"
//
if (fRB->fReverseTree == NULL) {
fRB->fReverseTree = pushNewNode(RBBINode::opStar);
RBBINode *operand = pushNewNode(RBBINode::setRef);
if (U_FAILURE(*fRB->fStatus)) {
return;
}
findSetFor(UnicodeString(TRUE, kAny, 3), operand);
fRB->fReverseTree->fLeftChild = operand;
operand->fParent = fRB->fReverseTree;
fNodeStackPtr -= 2;
}
//
// Parsing of the input RBBI rules is complete.
// We now have a parse tree for the rule expressions
// and a list of all UnicodeSets that are referenced.
//
#ifdef RBBI_DEBUG
if (fRB->fDebugEnv && uprv_strstr(fRB->fDebugEnv, "symbols")) {fSymbolTable->rbbiSymtablePrint();}
if (fRB->fDebugEnv && uprv_strstr(fRB->fDebugEnv, "ptree"))
{
RBBIDebugPrintf("Completed Forward Rules Parse Tree...\n");
fRB->fForwardTree->printTree(TRUE);
RBBIDebugPrintf("\nCompleted Reverse Rules Parse Tree...\n");
fRB->fReverseTree->printTree(TRUE);
RBBIDebugPrintf("\nCompleted Safe Point Forward Rules Parse Tree...\n");
fRB->fSafeFwdTree->printTree(TRUE);
RBBIDebugPrintf("\nCompleted Safe Point Reverse Rules Parse Tree...\n");
fRB->fSafeRevTree->printTree(TRUE);
}
#endif
}
void uRelease(uObject* object)
{
if (object)
{
if (Xli::AtomicDecrement(&object->__retains) == 0)
{
if (!uTryClearWeak(object))
return;
#ifdef DEBUG_ARC
uThreadData* thread = uGetThreadData();
if (thread->AutoReleasePtr >= thread->AutoReleaseStack)
{
uAutoReleaseFrame* frame = thread->AutoReleasePtr;
if (frame->AllocCount > 0)
{
frame->FreeCount++;
frame->FreeSize += object->__size;
}
}
#endif
uType* type = object->__type;
switch (type->Type)
{
case uTypeTypeClass:
{
uType* baseType = type;
do
{
if (baseType->fp_Finalize)
{
try { (*baseType->fp_Finalize)(object); }
catch (...) { Xli::Error->WriteFormat("Runtime Error: Unhandled exception in finalizer for %s\n", baseType->FullName); }
}
} while ((baseType = baseType->Base));
uReleaseStruct(type, object);
break;
}
case uTypeTypeStruct:
// This must be a boxed value, so append size of object header
uReleaseStruct(type, (uint8_t*)object + sizeof(uObject));
break;
case uTypeTypeDelegate:
uRelease(((uDelegate*)object)->_object);
uRelease(((uDelegate*)object)->_prev);
break;
case uTypeTypeArray:
{
uArray* array = (uArray*)object;
uArrayType* arrayType = (uArrayType*)type;
uType* elmType = arrayType->ElementType;
switch (elmType->Type)
{
case uTypeTypeClass:
case uTypeTypeInterface:
case uTypeTypeDelegate:
case uTypeTypeArray:
for (uObject** objAddr = (uObject**)array->_ptr;
array->_length--;
objAddr++)
uRelease(*objAddr);
break;
case uTypeTypeStruct:
for (uint8_t* address = (uint8_t*)array->_ptr;
array->_length--;
address += elmType->ValueSize)
uReleaseStruct(elmType, address);
break;
default:
break;
}
break;
}
default:
break;
}
#if DEBUG_ARC >= 2
Xli::Error->WriteFormat("free %s #%d (%d bytes)%s\n", object->__type->FullName, object->__id, object->__size, uGetCaller().Ptr());
#endif
#ifdef DEBUG_DUMPS
uEnterCritical();
_HeapObjects->Remove(object);
uExitCritical();
#endif
U_ASSERT(object->__type != ::g::Uno::Type_typeof());
U_FREE_OBJECT(object);
return;
}
if (object->__retains < 0)
{
#if DEBUG_ARC >= 4
Xli::Error->WriteFormat("*** BAD OBJECT: %s #%d (%d retains) ***%s\n", object->__type->FullName, object->__id, object->__retains, uGetCaller().Ptr());
#else
Xli::Error->WriteFormat("*** BAD OBJECT: 0x%llx ***\n", (uintptr_t)object);
#endif
U_FATAL();
}
else
{
#if DEBUG_ARC >= 3
Xli::Error->WriteFormat("release %s #%d (%d bytes, %d retains)%s\n", object->__type->FullName, object->__id, object->__size, object->__retains, uGetCaller().Ptr());
#endif
}
}
}
static void U_CALLCONV initNumberFormatService() {
U_ASSERT(gService == NULL);
ucln_i18n_registerCleanup(UCLN_I18N_NUMFMT, numfmt_cleanup);
gService = new ICUNumberFormatService();
}
uObject* uNew(uType* type, size_t size)
{
U_ASSERT(type && size);
return uInitObject(type, U_MALLOC_OBJECT(size, type), size);
}
int
U_EXPORT main (int argc, char* argv[])
{
U_ULIB_INIT(argv);
U_TRACE(5,"main(%d)",argc)
UTimeDate data1(31,12,99), data2("31/12/99");
U_ASSERT( UTimeDate("14/09/1752").getJulian() == 2361222 )
U_ASSERT( UTimeDate("31/12/1900").getJulian() == 2415385 )
U_ASSERT( UTimeDate("01/01/1970").getJulian() == 2440588 )
U_ASSERT( data1 == data2 )
U_ASSERT( data1.getDayOfWeek() == 5 ) // Venerdi
U_ASSERT( data2.getDayOfYear() == 365 )
U_ASSERT( UTimeDate("1/3/00").getDayOfWeek() == 3 ) // Mercoledi
U_ASSERT( UTimeDate(31,12,0).getDayOfYear() == 366 )
UTimeDate data3(60,2000);
UTimeDate data4("29/02/00");
U_ASSERT( data3 == data4 )
U_ASSERT( data3.getDayOfYear() == 60 )
UTimeDate data5(60,1901);
UTimeDate data6("1/3/1901");
U_ASSERT( data5 == data6 )
U_ASSERT( UTimeDate(17, 5, 2002).isValid() == true ) // TRUE May 17th 2002 is valid
U_ASSERT( UTimeDate(30, 2, 2002).isValid() == false ) // FALSE Feb 30th does not exist
U_ASSERT( UTimeDate(29, 2, 2004).isValid() == true ) // TRUE 2004 is a leap year
UTimeDate data7(29, 2, 2004);
UString x = data7.strftime("%Y-%m-%d");
U_ASSERT( x == U_STRING_FROM_CONSTANT("2004-02-29") )
U_ASSERT( UTimeDate("14/09/1752").getJulian() == 2361222 )
cout << "Date: " << data6.strftime("%d/%m/%y") << '\n';
while (cin >> data6) cout << data6 << '\n';
U_ASSERT( UTimeDate::getSecondFromTime("19030314104248Z", true, "%4u%2u%2u%2u%2u%2uZ") < u_now->tv_sec )
/*
typedef struct static_date {
struct timeval _timeval; // => u_now
char lock1[1];
char date1[17+1]; // 18/06/12 18:45:56
char lock2[1];
char date2[26+1]; // 04/Jun/2012:18:18:37 +0200
char lock3[1];
char date3[6+29+2+12+2+19+1]; // Date: Wed, 20 Jun 2012 11:43:17 GMT\r\nServer: ULib\r\nConnection: close\r\n
} static_date;
*/
ULog::static_date log_data;
(void) u_strftime2(log_data.date1, 17, "%d/%m/%y %T", u_now->tv_sec + u_now_adjust);
(void) u_strftime2(log_data.date2, 26, "%d/%b/%Y:%T %z", u_now->tv_sec + u_now_adjust);
(void) u_strftime2(log_data.date3, 6+29+2+12+2+17+2, "Date: %a, %d %b %Y %T GMT\r\nServer: ULib\r\nConnection: close\r\n", u_now->tv_sec);
U_INTERNAL_DUMP("date1 = %.17S date2 = %.26S date3+6 = %.29S", log_data.date1, log_data.date2, log_data.date3+6)
/*
for (int i = 0; i < 360; ++i)
{
u_now->tv_sec++;
UTimeDate::updateTime(log_data.date1 + 12);
UTimeDate::updateTime(log_data.date2 + 15);
UTimeDate::updateTime(log_data.date3+6 + 20);
cout.write(log_data.date1, 17);
cout.write(" - ", 3);
cout.write(log_data.date2, 26);
cout.write(" - ", 3);
cout.write(log_data.date3+6, 29);
cout.put('\n');
}
*/
}
/*
* This method updates the cache and must be called with a lock
*/
const UChar*
TZGNCore::getGenericLocationName(const UnicodeString& tzCanonicalID) {
U_ASSERT(!tzCanonicalID.isEmpty());
if (tzCanonicalID.length() > ZID_KEY_MAX) {
return NULL;
}
UErrorCode status = U_ZERO_ERROR;
UChar tzIDKey[ZID_KEY_MAX + 1];
int32_t tzIDKeyLen = tzCanonicalID.extract(tzIDKey, ZID_KEY_MAX + 1, status);
U_ASSERT(status == U_ZERO_ERROR); // already checked length above
tzIDKey[tzIDKeyLen] = 0;
const UChar *locname = (const UChar *)uhash_get(fLocationNamesMap, tzIDKey);
if (locname != NULL) {
// gEmpty indicate the name is not available
if (locname == gEmpty) {
return NULL;
}
return locname;
}
// Construct location name
UnicodeString name;
UnicodeString usCountryCode;
UBool isPrimary = FALSE;
ZoneMeta::getCanonicalCountry(tzCanonicalID, usCountryCode, &isPrimary);
if (!usCountryCode.isEmpty()) {
if (isPrimary) {
// If this is the primary zone in the country, use the country name.
char countryCode[ULOC_COUNTRY_CAPACITY];
U_ASSERT(usCountryCode.length() < ULOC_COUNTRY_CAPACITY);
int32_t ccLen = usCountryCode.extract(0, usCountryCode.length(), countryCode, sizeof(countryCode), US_INV);
countryCode[ccLen] = 0;
UnicodeString country;
fLocaleDisplayNames->regionDisplayName(countryCode, country);
fRegionFormat.format(country, name, status);
} else {
// If this is not the primary zone in the country,
// use the exemplar city name.
// getExemplarLocationName should retur non-empty string
// if the time zone is associated with a region
UnicodeString city;
fTimeZoneNames->getExemplarLocationName(tzCanonicalID, city);
fRegionFormat.format(city, name, status);
}
if (U_FAILURE(status)) {
return NULL;
}
}
locname = name.isEmpty() ? NULL : fStringPool.get(name, status);
if (U_SUCCESS(status)) {
// Cache the result
const UChar* cacheID = ZoneMeta::findTimeZoneID(tzCanonicalID);
U_ASSERT(cacheID != NULL);
if (locname == NULL) {
// gEmpty to indicate - no location name available
uhash_put(fLocationNamesMap, (void *)cacheID, (void *)gEmpty, &status);
} else {
uhash_put(fLocationNamesMap, (void *)cacheID, (void *)locname, &status);
if (U_FAILURE(status)) {
locname = NULL;
} else {
// put the name info into the trie
GNameInfo *nameinfo = (ZNameInfo *)uprv_malloc(sizeof(GNameInfo));
if (nameinfo != NULL) {
nameinfo->type = UTZGNM_LOCATION;
nameinfo->tzID = cacheID;
fGNamesTrie.put(locname, nameinfo, status);
}
}
}
}
return locname;
}
//---------------------------------------------------------------------
//
// dump Output the compiled form of the pattern.
// Debugging function only.
//
//---------------------------------------------------------------------
void RegexPattern::dumpOp(int32_t index) const {
(void)index; // Suppress warnings in non-debug build.
#if defined(REGEX_DEBUG)
static const char * const opNames[] = {URX_OPCODE_NAMES};
int32_t op = fCompiledPat->elementAti(index);
int32_t val = URX_VAL(op);
int32_t type = URX_TYPE(op);
int32_t pinnedType = type;
if ((uint32_t)pinnedType >= UPRV_LENGTHOF(opNames)) {
pinnedType = 0;
}
printf("%4d %08x %-15s ", index, op, opNames[pinnedType]);
switch (type) {
case URX_NOP:
case URX_DOTANY:
case URX_DOTANY_ALL:
case URX_FAIL:
case URX_CARET:
case URX_DOLLAR:
case URX_BACKSLASH_G:
case URX_BACKSLASH_X:
case URX_END:
case URX_DOLLAR_M:
case URX_CARET_M:
// Types with no operand field of interest.
break;
case URX_RESERVED_OP:
case URX_START_CAPTURE:
case URX_END_CAPTURE:
case URX_STATE_SAVE:
case URX_JMP:
case URX_JMP_SAV:
case URX_JMP_SAV_X:
case URX_BACKSLASH_B:
case URX_BACKSLASH_BU:
case URX_BACKSLASH_D:
case URX_BACKSLASH_Z:
case URX_STRING_LEN:
case URX_CTR_INIT:
case URX_CTR_INIT_NG:
case URX_CTR_LOOP:
case URX_CTR_LOOP_NG:
case URX_RELOC_OPRND:
case URX_STO_SP:
case URX_LD_SP:
case URX_BACKREF:
case URX_STO_INP_LOC:
case URX_JMPX:
case URX_LA_START:
case URX_LA_END:
case URX_BACKREF_I:
case URX_LB_START:
case URX_LB_CONT:
case URX_LB_END:
case URX_LBN_CONT:
case URX_LBN_END:
case URX_LOOP_C:
case URX_LOOP_DOT_I:
case URX_BACKSLASH_H:
case URX_BACKSLASH_R:
case URX_BACKSLASH_V:
// types with an integer operand field.
printf("%d", val);
break;
case URX_ONECHAR:
case URX_ONECHAR_I:
if (val < 0x20) {
printf("%#x", val);
} else {
printf("'%s'", CStr(UnicodeString(val))());
}
break;
case URX_STRING:
case URX_STRING_I:
{
int32_t lengthOp = fCompiledPat->elementAti(index+1);
U_ASSERT(URX_TYPE(lengthOp) == URX_STRING_LEN);
int32_t length = URX_VAL(lengthOp);
UnicodeString str(fLiteralText, val, length);
printf("%s", CStr(str)());
}
break;
case URX_SETREF:
case URX_LOOP_SR_I:
{
UnicodeString s;
UnicodeSet *set = (UnicodeSet *)fSets->elementAt(val);
set->toPattern(s, TRUE);
printf("%s", CStr(s)());
}
break;
case URX_STATIC_SETREF:
case URX_STAT_SETREF_N:
{
UnicodeString s;
if (val & URX_NEG_SET) {
printf("NOT ");
val &= ~URX_NEG_SET;
}
UnicodeSet *set = fStaticSets[val];
set->toPattern(s, TRUE);
printf("%s", CStr(s)());
}
break;
default:
printf("??????");
break;
}
printf("\n");
#endif
}
/*
* This method updates the cache and must be called with a lock
*/
const UChar*
TZGNCore::getPartialLocationName(const UnicodeString& tzCanonicalID,
const UnicodeString& mzID, UBool isLong, const UnicodeString& mzDisplayName) {
U_ASSERT(!tzCanonicalID.isEmpty());
U_ASSERT(!mzID.isEmpty());
U_ASSERT(!mzDisplayName.isEmpty());
PartialLocationKey key;
key.tzID = ZoneMeta::findTimeZoneID(tzCanonicalID);
key.mzID = ZoneMeta::findMetaZoneID(mzID);
key.isLong = isLong;
U_ASSERT(key.tzID != NULL && key.mzID != NULL);
const UChar* uplname = (const UChar*)uhash_get(fPartialLocationNamesMap, (void *)&key);
if (uplname != NULL) {
return uplname;
}
UnicodeString location;
UnicodeString usCountryCode;
ZoneMeta::getCanonicalCountry(tzCanonicalID, usCountryCode);
if (!usCountryCode.isEmpty()) {
char countryCode[ULOC_COUNTRY_CAPACITY];
U_ASSERT(usCountryCode.length() < ULOC_COUNTRY_CAPACITY);
int32_t ccLen = usCountryCode.extract(0, usCountryCode.length(), countryCode, sizeof(countryCode), US_INV);
countryCode[ccLen] = 0;
UnicodeString regionalGolden;
fTimeZoneNames->getReferenceZoneID(mzID, countryCode, regionalGolden);
if (tzCanonicalID == regionalGolden) {
// Use country name
fLocaleDisplayNames->regionDisplayName(countryCode, location);
} else {
// Otherwise, use exemplar city name
fTimeZoneNames->getExemplarLocationName(tzCanonicalID, location);
}
} else {
fTimeZoneNames->getExemplarLocationName(tzCanonicalID, location);
if (location.isEmpty()) {
// This could happen when the time zone is not associated with a country,
// and its ID is not hierarchical, for example, CST6CDT.
// We use the canonical ID itself as the location for this case.
location.setTo(tzCanonicalID);
}
}
UErrorCode status = U_ZERO_ERROR;
UnicodeString name;
fFallbackFormat.format(location, mzDisplayName, name, status);
if (U_FAILURE(status)) {
return NULL;
}
uplname = fStringPool.get(name, status);
if (U_SUCCESS(status)) {
// Add the name to cache
PartialLocationKey* cacheKey = (PartialLocationKey *)uprv_malloc(sizeof(PartialLocationKey));
if (cacheKey != NULL) {
cacheKey->tzID = key.tzID;
cacheKey->mzID = key.mzID;
cacheKey->isLong = key.isLong;
uhash_put(fPartialLocationNamesMap, (void *)cacheKey, (void *)uplname, &status);
if (U_FAILURE(status)) {
uprv_free(cacheKey);
} else {
// put the name to the local trie as well
GNameInfo *nameinfo = (ZNameInfo *)uprv_malloc(sizeof(GNameInfo));
if (nameinfo != NULL) {
nameinfo->type = isLong ? UTZGNM_LONG : UTZGNM_SHORT;
nameinfo->tzID = key.tzID;
fGNamesTrie.put(uplname, nameinfo, status);
}
}
}
}
return uplname;
}
//-----------------------------------------------------------------------------
//
// calcChainedFollowPos. Modify the previously calculated followPos sets
// to implement rule chaining. NOT described by Aho
//
//-----------------------------------------------------------------------------
void RBBITableBuilder::calcChainedFollowPos(RBBINode *tree) {
UVector endMarkerNodes(*fStatus);
UVector leafNodes(*fStatus);
int32_t i;
if (U_FAILURE(*fStatus)) {
return;
}
// get a list of all endmarker nodes.
tree->findNodes(&endMarkerNodes, RBBINode::endMark, *fStatus);
// get a list all leaf nodes
tree->findNodes(&leafNodes, RBBINode::leafChar, *fStatus);
if (U_FAILURE(*fStatus)) {
return;
}
// Get all nodes that can be the start a match, which is FirstPosition()
// of the portion of the tree corresponding to user-written rules.
// See the tree description in bofFixup().
RBBINode *userRuleRoot = tree;
if (fRB->fSetBuilder->sawBOF()) {
userRuleRoot = tree->fLeftChild->fRightChild;
}
U_ASSERT(userRuleRoot != NULL);
UVector *matchStartNodes = userRuleRoot->fFirstPosSet;
// Iteratate over all leaf nodes,
//
int32_t endNodeIx;
int32_t startNodeIx;
for (endNodeIx=0; endNodeIx<leafNodes.size(); endNodeIx++) {
RBBINode *tNode = (RBBINode *)leafNodes.elementAt(endNodeIx);
RBBINode *endNode = NULL;
// Identify leaf nodes that correspond to overall rule match positions.
// These include an endMarkerNode in their followPos sets.
for (i=0; i<endMarkerNodes.size(); i++) {
if (tNode->fFollowPos->contains(endMarkerNodes.elementAt(i))) {
endNode = tNode;
break;
}
}
if (endNode == NULL) {
// node wasn't an end node. Try again with the next.
continue;
}
// We've got a node that can end a match.
// Line Break Specific hack: If this node's val correspond to the $CM char class,
// don't chain from it.
// TODO: Add rule syntax for this behavior, get specifics out of here and
// into the rule file.
if (fRB->fLBCMNoChain) {
UChar32 c = this->fRB->fSetBuilder->getFirstChar(endNode->fVal);
if (c != -1) {
// c == -1 occurs with sets containing only the {eof} marker string.
ULineBreak cLBProp = (ULineBreak)u_getIntPropertyValue(c, UCHAR_LINE_BREAK);
if (cLBProp == U_LB_COMBINING_MARK) {
continue;
}
}
}
// Now iterate over the nodes that can start a match, looking for ones
// with the same char class as our ending node.
RBBINode *startNode;
for (startNodeIx = 0; startNodeIx<matchStartNodes->size(); startNodeIx++) {
startNode = (RBBINode *)matchStartNodes->elementAt(startNodeIx);
if (startNode->fType != RBBINode::leafChar) {
continue;
}
if (endNode->fVal == startNode->fVal) {
// The end val (character class) of one possible match is the
// same as the start of another.
// Add all nodes from the followPos of the start node to the
// followPos set of the end node, which will have the effect of
// letting matches transition from a match state at endNode
// to the second char of a match starting with startNode.
setAdd(endNode->fFollowPos, startNode->fFollowPos);
}
}
}
}
UErrorCode convsample_06()
{
printf("\n\n==============================================\n"
"Sample 06: C: frequency distribution of letters in a UTF-8 document\n");
FILE *f;
int32_t count;
char inBuf[BUFFERSIZE];
const char *source;
const char *sourceLimit;
int32_t uBufSize = 0;
UConverter *conv;
UErrorCode status = U_ZERO_ERROR;
uint32_t letters=0, total=0;
CharFreqInfo *info;
UChar32 charCount = 0x10000; /* increase this if you want to handle non bmp.. todo: automatically bump it.. */
UChar32 p;
uint32_t ie = 0;
uint32_t gh = 0;
UChar32 l = 0;
f = fopen("data06.txt", "r");
if(!f)
{
fprintf(stderr, "Couldn't open file 'data06.txt' (UTF-8 data file).\n");
return U_FILE_ACCESS_ERROR;
}
info = (CharFreqInfo*)malloc(sizeof(CharFreqInfo) * charCount);
if(!info)
{
fprintf(stderr, " Couldn't allocate %d bytes for freq counter\n", sizeof(CharFreqInfo)*charCount);
}
/* reset frequencies */
for(p=0;p<charCount;p++)
{
info[p].codepoint = p;
info[p].frequency = 0;
}
// **************************** START SAMPLE *******************
conv = ucnv_open("utf-8", &status);
assert(U_SUCCESS(status));
uBufSize = (BUFFERSIZE/ucnv_getMinCharSize(conv));
printf("input bytes %d / min chars %d = %d UChars\n",
BUFFERSIZE, ucnv_getMinCharSize(conv), uBufSize);
// grab another buffer's worth
while((!feof(f)) &&
((count=fread(inBuf, 1, BUFFERSIZE , f)) > 0) )
{
// Convert bytes to unicode
source = inBuf;
sourceLimit = inBuf + count;
while(source < sourceLimit)
{
p = ucnv_getNextUChar(conv, &source, sourceLimit, &status);
if(U_FAILURE(status))
{
fprintf(stderr, "%s @ %d\n", u_errorName(status), total);
status = U_ZERO_ERROR;
continue;
}
U_ASSERT(status);
total++;
if(u_isalpha(p))
letters++;
if((u_tolower(l) == 'i') && (u_tolower(p) == 'e'))
ie++;
if((u_tolower(l) == 'g') && (u_tolower(p) == 0x0127))
gh++;
if(p>charCount)
{
fprintf(stderr, "U+%06X: oh.., we only handle BMP characters so far.. redesign!\n", p);
free(info);
fclose(f);
ucnv_close(conv);
return U_UNSUPPORTED_ERROR;
}
info[p].frequency++;
l = p;
}
}
fclose(f);
ucnv_close(conv);
printf("%d letters out of %d total UChars.\n", letters, total);
printf("%d ie digraphs, %d gh digraphs.\n", ie, gh);
// now, we could sort it..
// qsort(info, charCount, sizeof(info[0]), charfreq_compare);
for(p=0;p<charCount;p++)
{
if(info[p].frequency)
{
printf("% 5d U+%06X ", info[p].frequency, p);
if(p <= 0xFFFF)
{
prettyPrintUChar((UChar)p);
}
printf("\n");
}
}
free(info);
// ***************************** END SAMPLE ********************
printf("\n");
return U_ZERO_ERROR;
}
/**
* Currently, getDouble() depends on atof() to do its conversion.
*
* WARNING!!
* This is an extremely costly function. ~1/2 of the conversion time
* can be linked to this function.
*/
double
DigitList::getDouble() const
{
// TODO: fix thread safety. Can probably be finessed some by analyzing
// what public const functions can see which DigitLists.
// Like precompute fDouble for DigitLists coming in from a parse
// or from a Formattable::set(), but not for any others.
if (fHaveDouble) {
return fDouble;
}
DigitList *nonConstThis = const_cast<DigitList *>(this);
if (gDecimal == 0) {
char rep[MAX_DIGITS];
// For machines that decide to change the decimal on you,
// and try to be too smart with localization.
// This normally should be just a '.'.
sprintf(rep, "%+1.1f", 1.0);
gDecimal = rep[2];
}
if (isZero()) {
nonConstThis->fDouble = 0.0;
if (decNumberIsNegative(fDecNumber)) {
nonConstThis->fDouble /= -1;
}
} else if (isInfinite()) {
if (std::numeric_limits<double>::has_infinity) {
nonConstThis->fDouble = std::numeric_limits<double>::infinity();
} else {
nonConstThis->fDouble = std::numeric_limits<double>::max();
}
if (!isPositive()) {
nonConstThis->fDouble = -fDouble;
}
} else {
MaybeStackArray<char, MAX_DBL_DIGITS+18> s;
// Note: 14 is a magic constant from the decNumber library documentation,
// the max number of extra characters beyond the number of digits
// needed to represent the number in string form. Add a few more
// for the additional digits we retain.
// Round down to appx. double precision, if the number is longer than that.
// Copy the number first, so that we don't modify the original.
if (getCount() > MAX_DBL_DIGITS + 3) {
DigitList numToConvert(*this);
numToConvert.reduce(); // Removes any trailing zeros, so that digit count is good.
numToConvert.round(MAX_DBL_DIGITS+3);
uprv_decNumberToString(numToConvert.fDecNumber, s);
// TODO: how many extra digits should be included for an accurate conversion?
} else {
uprv_decNumberToString(this->fDecNumber, s);
}
U_ASSERT(uprv_strlen(&s[0]) < MAX_DBL_DIGITS+18);
if (gDecimal != '.') {
char *decimalPt = strchr(s, '.');
if (decimalPt != NULL) {
*decimalPt = gDecimal;
}
}
char *end = NULL;
nonConstThis->fDouble = uprv_strtod(s, &end);
}
nonConstThis->fHaveDouble = TRUE;
return fDouble;
}