void OTGWBase::ParseLine()
{
if (m_bufferpos<2)
return;
std::string sLine((char*)&m_buffer);
std::vector<std::string> results;
StringSplit(sLine,",",results);
if (results.size()==25)
{
//status report
//0 Status (MsgID=0) - Printed as two 8-bit bitfields
//1 Control setpoint (MsgID=1) - Printed as a floating point value
//2 Remote parameter flags (MsgID= 6) - Printed as two 8-bit bitfields
//3 Maximum relative modulation level (MsgID=14) - Printed as a floating point value
//4 Boiler capacity and modulation limits (MsgID=15) - Printed as two bytes
//5 Room Setpoint (MsgID=16) - Printed as a floating point value
//6 Relative modulation level (MsgID=17) - Printed as a floating point value
//7 CH water pressure (MsgID=18) - Printed as a floating point value
//8 Room temperature (MsgID=24) - Printed as a floating point value
//9 Boiler water temperature (MsgID=25) - Printed as a floating point value
//10 DHW temperature (MsgID=26) - Printed as a floating point value
//11 Outside temperature (MsgID=27) - Printed as a floating point value
//12 Return water temperature (MsgID=28) - Printed as a floating point value
//13 DHW setpoint boundaries (MsgID=48) - Printed as two bytes
//14 Max CH setpoint boundaries (MsgID=49) - Printed as two bytes
//15 DHW setpoint (MsgID=56) - Printed as a floating point value
//16 Max CH water setpoint (MsgID=57) - Printed as a floating point value
//17 Burner starts (MsgID=116) - Printed as a decimal value
//18 CH pump starts (MsgID=117) - Printed as a decimal value
//19 DHW pump/valve starts (MsgID=118) - Printed as a decimal value
//20 DHW burner starts (MsgID=119) - Printed as a decimal value
//21 Burner operation hours (MsgID=120) - Printed as a decimal value
//22 CH pump operation hours (MsgID=121) - Printed as a decimal value
//23 DHW pump/valve operation hours (MsgID=122) - Printed as a decimal value
//24 DHW burner operation hours (MsgID=123) - Printed as a decimal value
_tOTGWStatus _status;
int idx=0;
_status.MsgID=results[idx++];
if (_status.MsgID.size()==17)
{
bool bCH_enabled=(_status.MsgID[7]=='1'); UpdateSwitch(101,bCH_enabled,"CH_enabled");
bool bDHW_enabled=(_status.MsgID[6]=='1'); UpdateSwitch(102,bDHW_enabled,"DHW_enabled");
bool bCooling_enable=(_status.MsgID[5]=='1'); UpdateSwitch(103,bCooling_enable,"Cooling_enable");
bool bOTC_active=(_status.MsgID[4]=='1'); UpdateSwitch(104,bOTC_active,"OTC_active");
bool bCH2_enabled=(_status.MsgID[3]=='1'); UpdateSwitch(105,bCH2_enabled,"CH2_enabled");
bool bFault_indication=(_status.MsgID[9+7]=='1'); UpdateSwitch(110,bFault_indication,"Fault_indication");
bool bCH_active=(_status.MsgID[9+6]=='1'); UpdateSwitch(111,bCH_active,"CH_active");
bool bDHW_active=(_status.MsgID[9+5]=='1'); UpdateSwitch(112,bDHW_active,"DHW_active");
bool bFlameOn=(_status.MsgID[9+4]=='1'); UpdateSwitch(113,bFlameOn,"FlameOn");
bool bCooling_Mode_Active=(_status.MsgID[9+3]=='1'); UpdateSwitch(114,bCooling_Mode_Active,"Cooling_Mode_Active");
bool bCH2_Active=(_status.MsgID[9+2]=='1'); UpdateSwitch(115,bCH2_Active,"CH2_Active");
bool bDiagnosticEvent=(_status.MsgID[9+1]=='1'); UpdateSwitch(116,bDiagnosticEvent,"DiagnosticEvent");
}
_status.Control_setpoint=(float)atof(results[idx++].c_str()); UpdateTempSensor(idx-1,_status.Control_setpoint,"Control Setpoint");
_status.Remote_parameter_flags=results[idx++];
_status.Maximum_relative_modulation_level=(float)atof(results[idx++].c_str());
_status.Boiler_capacity_and_modulation_limits=results[idx++];
_status.Room_Setpoint=(float)atof(results[idx++].c_str()); UpdateSetPointSensor(idx-1,_status.Room_Setpoint,"Room Setpoint");
_status.Relative_modulation_level=(float)atof(results[idx++].c_str());
_status.CH_water_pressure=(float)atof(results[idx++].c_str());
if (_status.CH_water_pressure!=0)
{
UpdatePressureSensor(idx-1,_status.CH_water_pressure,"CH Water Pressure");
}
_status.Room_temperature=(float)atof(results[idx++].c_str()); UpdateTempSensor(idx-1,_status.Room_temperature,"Room Temperature");
_status.Boiler_water_temperature=(float)atof(results[idx++].c_str()); UpdateTempSensor(idx-1,_status.Boiler_water_temperature,"Boiler Water Temperature");
_status.DHW_temperature=(float)atof(results[idx++].c_str()); UpdateTempSensor(idx-1,_status.DHW_temperature,"DHW Temperature");
_status.Outside_temperature=(float)atof(results[idx++].c_str()); UpdateTempSensor(idx-1,_status.Outside_temperature,"Outside Temperature");
_status.Return_water_temperature=(float)atof(results[idx++].c_str()); UpdateTempSensor(idx-1,_status.Return_water_temperature,"Return Water Temperature");
_status.DHW_setpoint_boundaries=results[idx++];
_status.Max_CH_setpoint_boundaries=results[idx++];
_status.DHW_setpoint=(float)atof(results[idx++].c_str()); UpdateSetPointSensor(idx-1,_status.DHW_setpoint,"DHW Setpoint");
_status.Max_CH_water_setpoint=(float)atof(results[idx++].c_str()); UpdateSetPointSensor(idx-1,_status.Max_CH_water_setpoint,"Max_CH Water Setpoint");
_status.Burner_starts=atol(results[idx++].c_str());
_status.CH_pump_starts=atol(results[idx++].c_str());
_status.DHW_pump_valve_starts=atol(results[idx++].c_str());
_status.DHW_burner_starts=atol(results[idx++].c_str());
_status.Burner_operation_hours=atol(results[idx++].c_str());
_status.CH_pump_operation_hours=atol(results[idx++].c_str());
_status.DHW_pump_valve_operation_hours=atol(results[idx++].c_str());
_status.DHW_burner_operation_hours=atol(results[idx++].c_str());
return;
}
else
{
if (sLine=="SE")
{
_log.Log(LOG_ERROR,"OTGW: Error received!");
}
else
{
if (
(sLine.find("OT")==std::string::npos)&&
(sLine.find("PS")==std::string::npos)
)
{
//Dont report OT/PS feedback
_log.Log(LOG_STATUS,"OTGW: %s",sLine.c_str());
}
}
}
}
void OTGWBase::ParseLine()
{
if (m_bufferpos<2)
return;
std::string sLine((char*)&m_buffer);
std::vector<std::string> results;
StringSplit(sLine,",",results);
if (results.size()==25)
{
//status report
//0 Status (MsgID=0) - Printed as two 8-bit bitfields
//1 Control setpoint (MsgID=1) - Printed as a floating point value
//2 Remote parameter flags (MsgID= 6) - Printed as two 8-bit bitfields
//3 Maximum relative modulation level (MsgID=14) - Printed as a floating point value
//4 Boiler capacity and modulation limits (MsgID=15) - Printed as two bytes
//5 Room Setpoint (MsgID=16) - Printed as a floating point value
//6 Relative modulation level (MsgID=17) - Printed as a floating point value
//7 CH water pressure (MsgID=18) - Printed as a floating point value
//8 Room temperature (MsgID=24) - Printed as a floating point value
//9 Boiler water temperature (MsgID=25) - Printed as a floating point value
//10 DHW temperature (MsgID=26) - Printed as a floating point value
//11 Outside temperature (MsgID=27) - Printed as a floating point value
//12 Return water temperature (MsgID=28) - Printed as a floating point value
//13 DHW setpoint boundaries (MsgID=48) - Printed as two bytes
//14 Max CH setpoint boundaries (MsgID=49) - Printed as two bytes
//15 DHW setpoint (MsgID=56) - Printed as a floating point value
//16 Max CH water setpoint (MsgID=57) - Printed as a floating point value
//17 Burner starts (MsgID=116) - Printed as a decimal value
//18 CH pump starts (MsgID=117) - Printed as a decimal value
//19 DHW pump/valve starts (MsgID=118) - Printed as a decimal value
//20 DHW burner starts (MsgID=119) - Printed as a decimal value
//21 Burner operation hours (MsgID=120) - Printed as a decimal value
//22 CH pump operation hours (MsgID=121) - Printed as a decimal value
//23 DHW pump/valve operation hours (MsgID=122) - Printed as a decimal value
//24 DHW burner operation hours (MsgID=123) - Printed as a decimal value
_tOTGWStatus _status;
int idx=0;
_status.MsgID=results[idx++];
if (_status.MsgID.size()==17)
{
bool bCH_enabled=(_status.MsgID[7]=='1'); UpdateSwitch(101,bCH_enabled,"CH_enabled");
bool bDHW_enabled=(_status.MsgID[6]=='1'); UpdateSwitch(102,bDHW_enabled,"DHW_enabled");
bool bCooling_enable=(_status.MsgID[5]=='1'); UpdateSwitch(103,bCooling_enable,"Cooling_enable");
bool bOTC_active=(_status.MsgID[4]=='1'); UpdateSwitch(104,bOTC_active,"OTC_active");
bool bCH2_enabled=(_status.MsgID[3]=='1'); UpdateSwitch(105,bCH2_enabled,"CH2_enabled");
bool bFault_indication=(_status.MsgID[9+7]=='1'); UpdateSwitch(110,bFault_indication,"Fault_indication");
bool bCH_active=(_status.MsgID[9+6]=='1'); UpdateSwitch(111,bCH_active,"CH_active");
bool bDHW_active=(_status.MsgID[9+5]=='1'); UpdateSwitch(112,bDHW_active,"DHW_active");
bool bFlameOn=(_status.MsgID[9+4]=='1'); UpdateSwitch(113,bFlameOn,"FlameOn");
bool bCooling_Mode_Active=(_status.MsgID[9+3]=='1'); UpdateSwitch(114,bCooling_Mode_Active,"Cooling_Mode_Active");
bool bCH2_Active=(_status.MsgID[9+2]=='1'); UpdateSwitch(115,bCH2_Active,"CH2_Active");
bool bDiagnosticEvent=(_status.MsgID[9+1]=='1'); UpdateSwitch(116,bDiagnosticEvent,"DiagnosticEvent");
}
_status.Control_setpoint = static_cast<float>(atof(results[idx++].c_str())); SendTempSensor(idx - 1, 255, _status.Control_setpoint, "Control Setpoint");
_status.Remote_parameter_flags=results[idx++];
_status.Maximum_relative_modulation_level = static_cast<float>(atof(results[idx++].c_str()));
bool bExists = CheckPercentageSensorExists(idx - 1, 1);
if ((_status.Maximum_relative_modulation_level != 0) || (bExists))
{
SendPercentageSensor(idx - 1, 1, 255, _status.Maximum_relative_modulation_level, "Maximum Relative Modulation Level");
}
_status.Boiler_capacity_and_modulation_limits=results[idx++];
_status.Room_Setpoint = static_cast<float>(atof(results[idx++].c_str())); UpdateSetPointSensor(idx - 1, ((m_OverrideTemperature!=0.0f) ? m_OverrideTemperature : _status.Room_Setpoint), "Room Setpoint");
_status.Relative_modulation_level = static_cast<float>(atof(results[idx++].c_str()));
bExists = CheckPercentageSensorExists(idx - 1, 1);
if ((_status.Relative_modulation_level != 0) || (bExists))
{
SendPercentageSensor(idx - 1, 1, 255, _status.Relative_modulation_level, "Relative modulation level");
}
_status.CH_water_pressure = static_cast<float>(atof(results[idx++].c_str()));
if (_status.CH_water_pressure != 0)
{
SendPressureSensor(0, idx - 1, 255, _status.CH_water_pressure, "CH Water Pressure");
}
_status.Room_temperature = static_cast<float>(atof(results[idx++].c_str())); SendTempSensor(idx - 1, 255, _status.Room_temperature, "Room Temperature");
_status.Boiler_water_temperature = static_cast<float>(atof(results[idx++].c_str())); SendTempSensor(idx - 1, 255, _status.Boiler_water_temperature, "Boiler Water Temperature");
_status.DHW_temperature = static_cast<float>(atof(results[idx++].c_str())); SendTempSensor(idx - 1, 255, _status.DHW_temperature, "DHW Temperature");
_status.Outside_temperature = static_cast<float>(atof(results[idx++].c_str())); SendTempSensor(idx - 1, 255, _status.Outside_temperature, "Outside Temperature");
_status.Return_water_temperature = static_cast<float>(atof(results[idx++].c_str())); SendTempSensor(idx - 1, 255, _status.Return_water_temperature, "Return Water Temperature");
_status.DHW_setpoint_boundaries=results[idx++];
_status.Max_CH_setpoint_boundaries=results[idx++];
_status.DHW_setpoint = static_cast<float>(atof(results[idx++].c_str())); UpdateSetPointSensor(idx - 1, _status.DHW_setpoint, "DHW Setpoint");
_status.Max_CH_water_setpoint = static_cast<float>(atof(results[idx++].c_str())); UpdateSetPointSensor(idx - 1, _status.Max_CH_water_setpoint, "Max_CH Water Setpoint");
_status.Burner_starts=atol(results[idx++].c_str());
_status.CH_pump_starts=atol(results[idx++].c_str());
_status.DHW_pump_valve_starts=atol(results[idx++].c_str());
_status.DHW_burner_starts=atol(results[idx++].c_str());
_status.Burner_operation_hours=atol(results[idx++].c_str());
_status.CH_pump_operation_hours=atol(results[idx++].c_str());
_status.DHW_pump_valve_operation_hours=atol(results[idx++].c_str());
_status.DHW_burner_operation_hours=atol(results[idx++].c_str());
return;
}
else
{
if (sLine=="SE")
{
_log.Log(LOG_ERROR,"OTGW: Error received!");
}
else if (sLine.find("PR: G")!=std::string::npos)
{
_tOTGWGPIO _GPIO;
_GPIO.A=static_cast<int>(sLine[6]- '0');
// if (_GPIO.A==0 || _GPIO.A==1)
// {
UpdateSwitch(96,(_GPIO.A==1),"GPIOAPulledToGround");
// }
// else
// {
// Remove device (how?)
// }
_GPIO.B=static_cast<int>(sLine[7]- '0');
// if (_GPIO.B==0 || _GPIO.B==1)
// {
UpdateSwitch(97,(_GPIO.B==1),"GPIOBPulledToGround");
// }
// else
// {
// Remove device (how?)
// }
}
else if (sLine.find("PR: I")!=std::string::npos)
{
_tOTGWGPIO _GPIO;
_GPIO.A=static_cast<int>(sLine[6]- '0');
UpdateSwitch(98,(_GPIO.A==1),"GPIOAStatusIsHigh");
_GPIO.B=static_cast<int>(sLine[7]- '0');
UpdateSwitch(99,(_GPIO.B==1),"GPIOBStatusIsHigh");
}
else if (sLine.find("PR: O")!=std::string::npos)
{
// Check if setpoint is overriden
m_OverrideTemperature=0.0f;
char status=sLine[6];
if (status == 'c' || status == 't')
{
// Get override setpoint value
m_OverrideTemperature=static_cast<float>(atof(sLine.substr(7).c_str()));
}
}
else if (sLine.find("PR: A") != std::string::npos)
{
//Gateway Version
std::string tmpstr = sLine.substr(6);
size_t tpos = tmpstr.find(' ');
if (tpos != std::string::npos)
{
m_Version = tmpstr.substr(tpos + 9);
}
}
else
{
if (
(sLine.find("OT") == std::string::npos)&&
(sLine.find("PS") == std::string::npos)&&
(sLine.find("SC") == std::string::npos)
)
{
//Dont report OT/PS/SC feedback
_log.Log(LOG_STATUS,"OTGW: %s",sLine.c_str());
}
}
}
}
